Guys how to revert back to miui - Xiaomi Redmi Note 3 Questions & Answers

Guys,
i'm using cm14.1 i want to revert back to miui ....please help
when i tried flash fastboot rom (kenzo_global_images_V7.3.6.0.LHOMIDD_20160523.0000.23_5.1_global_aef179560d) my wifi not worked. then i came back to cm14.1 now everthing work fine but i need miui.....please help
(sorry for bad english)

Same happened to me, I guess because we try downgrade to lollypop which has different radios. First I tried with twrp and with fastboot, but no wifi on 5.1. MM works fine for me... If anyone know how to downgrade to 5.1 I want answer too

redminote3 said:
Same happened to me, I guess because we try downgrade to lollypop which has different radios. First I tried with twrp and with fastboot, but no wifi on 5.1. MM works fine for me... If anyone know how to downgrade to 5.1 I want answer too
Click to expand...
Click to collapse
Bro did miui dev 6.0 fastboot rom work ?

Yeah, wifi and all will work no doubt on 6.0

use xiaomi.eu rom...flash from twrp...everything work properly for me.
site: xiaomi.eu

I use EU ROM currently too and it is the best one for me to date, also freezed some system apps with Titanium Backup.
But still dont know, if theres a way to downgrade to 5.1 if I dont have backup from 5.1, because my Kenzo came to me with 6.0... It boots fine, but wifi dont work, so also other radios, so its not usable
P.S. Can I flash with TWRP(zcx) old EU ROM recovery with 5.1 and radios will work?
I guess ill try that now

redminote3 said:
I use EU ROM currently too and it is the best one for me to date, also freezed some system apps with Titanium Backup.
But still dont know, if theres a way to downgrade to 5.1 if I dont have backup from 5.1, because my Kenzo came to me with 6.0... It boots fine, but wifi dont work, so also other radios, so its not usable
P.S. Can I flash with TWRP(zcx) old EU ROM recovery with 5.1 and radios will work?
I guess ill try that now
Click to expand...
Click to collapse
yes...you can directly flash 5.1 rom from zcx.
backup your data then do factory reset in twrp before flashing LP rom to remove any MM encryption.
hope you can downgrade without any problem..happy flashing.
anyway, probably your bootloader will relocked. but i am not really sure about this, just check it first after flashing LP rom.

abihary said:
use xiaomi.eu rom...flash from twrp...everything work properly for me.
site: xiaomi.eu
Click to expand...
Click to collapse
how to download recovery rom xiaomi.eu ...i didn't get any download button over there

abihary said:
yes...you can directly flash 5.1 rom from zcx.
backup your data then do factory reset in twrp before flashing LP rom to remove any MM encryption.
hope you can downgrade without any problem..happy flashing.
anyway, probably your bootloader will relocked. but i am not really sure about this, just check it first after flashing LP rom.
Click to expand...
Click to collapse
I tried that yesterday, except I wiped all except cust/microsd , flashed 5.1 eu rom and then I flashed also SuperSU, it was a disaster, phone only shows Mi logo and turn off...I cant go to twrp, only to fastboot. Im going to get computer in two hours where I have everything set up And will try to go to EDL mode and then flash With MiFlash... I doubt that flashing 5.1 will work with wifi

Denis:) said:
I tried that yesterday, except I wiped all except cust/microsd , flashed 5.1 eu rom and then I flashed also SuperSU, it was a disaster, phone only shows Mi logo and turn off...I cant go to twrp, only to fastboot. Im going to get computer in two hours where I have everything set up And will try to go to EDL mode and then flash With MiFlash... I doubt that flashing 5.1 will work with wifi
Click to expand...
Click to collapse
from fastboot, are you check your bootloader? it seems your bootloader relocked, thats why you can't pass mi logo
if your bootloader relocked, you can easily unlock it using miunlock.
for wifi, you can easily flash any miui mm firmware from twrp.

Thank you for the tip, didnt thought about that...
im gonna borrow computer now, I have all drivers installed etc on it...
If its only relocked and I will be able to boot and wifi will not work, where can I get firmware (and you must be thinking LP firmware not MM, right?
btw I flashed older EU ROM MIUI7, 5.1 then flashed through zcx supersu and reboot, now Mi logo only flashss and turn off. Only fastboot I can enter.
I will then first check if BL is locked, and unlock it if it is...
thank you for help

Ok so you were right, BL was locked so I unlocked it and got enryption problem after booting up, I had to reflash ZCX TWRP, because EU ROM replaced it with official 3.2.0. So now I am finally booted up on EU rom MIUI 7.3 by xiaomi.eu/Beta, Android 5.1.1, but Wifi as expected dont work, also SIM is not recognised.
What and where to get radios I have to flash to get it working? Because it says unknown under system info about version of radios
Also it says unknown device ID (IMEI,..).
I have backed up all partitions before on MIUI 8 EU,6.0, so do I need to flash those radios or firmware or do I need it from 5.1? And where to get it if so
Nice I got it to work, restored EFS,MODEM,FIRMWARE ROM,FIRMWARE EMMC and wifi works and SIM is working )
Nice I had backup of that...still not sure if all works as needed, gotta test a bit

Denis:) said:
Thank you for the tip, didnt thought about that...
im gonna borrow computer now, I have all drivers installed etc on it...
If its only relocked and I will be able to boot and wifi will not work, where can I get firmware (and you must be thinking LP firmware not MM, right?
btw I flashed older EU ROM MIUI7, 5.1 then flashed through zcx supersu and reboot, now Mi logo only flashss and turn off. Only fastboot I can enter.
I will then first check if BL is locked, and unlock it if it is...
thank you for help
Click to expand...
Click to collapse
for me, it's positive thats your bootloader relocked. unlock it, and you can boot into rom. for firmware, you can download from below
link firmware:
miui LP firmware
miui 6.7.21 firmware
miui 7.3.2.0 firmware
miui MM firmware
miui 6.9.29 firmware
miui 6.10.13 firmware
redminote3 said:
Ok so you were right, BL was locked so I unlocked it and got enryption problem after booting up, I had to reflash ZCX TWRP, because EU ROM replaced it with official 3.2.0. So now I am finally booted up on EU rom MIUI 7.3 by xiaomi.eu/Beta, Android 5.1.1, but Wifi as expected dont work, also SIM is not recognised.
What and where to get radios I have to flash to get it working? Because it says unknown under system info about version of radios
Also it says unknown device ID (IMEI,..).
I have backed up all partitions before on MIUI 8 EU,6.0, so do I need to flash those radios or firmware or do I need it from 5.1? And where to get it if so
Nice I got it to work, restored EFS,MODEM,FIRMWARE ROM,FIRMWARE EMMC and wifi works and SIM is working )
Nice I had backup of that...still not sure if all works as needed, gotta test a bit
Click to expand...
Click to collapse
good, seems your problem already solved. :good:

Yeah, now a problem is I cant access fingerprint or password lock, I think because I cant connect to Mi account, cant find my device, also cant manually log in, because it cannot verify "find device", also cannot access to "Privacy" to install 3d party apps it is a must to enable this... Also settings freeze occasionally. I think I still didnt do something right... Any tip?
Thank you for helping me!

redminote3 said:
Yeah, now a problem is I cant access fingerprint or password lock, I think because I cant connect to Mi account, cant find my device, also cant manually log in, because it cannot verify "find device", also cannot access to "Privacy" to install 3d party apps it is a must to enable this... Also settings freeze occasionally. I think I still didnt do something right... Any tip?
Thank you for helping me!
Click to expand...
Click to collapse
sound like firmware problem, you can try to flash firmware from above link which suitable with your current android version. if you're in LP, flash 6.7.21/7.3.2.0 and see if it work. or, you can flash one of MM firmware above.
to avoid from getting relocked, you can delete emmc_appsboot.mbn from zip package using winrar/7zip without extract it and let the apps repack it again.

abihary said:
sound like firmware problem, you can try to flash firmware from above link which suitable with your current android version. if you're in LP, flash 6.7.21/7.3.2.0 and see if it work. or, you can flash one of MM firmware above.
to avoid from getting relocked, you can delete emmc_appsboot.mbn from zip package using winrar/7zip without extract it and let the apps repack it again.
Click to expand...
Click to collapse
I tried flashing your firmware 7.3.2.0 and had to restore EFS,MODEM(maybe only modem) to get wifi,SIM working also your firmware fixed only I could log in to Mi account and find device, but still couldnt set PIN,FP, also tried calling and couldnt hear anything also on the other side no voice.
Im losing confidence that I can get everything work on 5.1 MIUI7
Then I wiped everything expect microSD and wanted to restore backup I made on EU ROM,MM6, but it said read only. Then I flashed 6.10.13 EU ROM and it works everything perfectly here...
Still want to downgrade to MIUI7,5.1 if theres a way to get it all working, because I heard battery is lil better...

redminote3 said:
I tried flashing your firmware 7.3.2.0 and had to restore EFS,MODEM(maybe only modem) to get wifi,SIM working also your firmware fixed only I could log in to Mi account and find device, but still couldnt set PIN,FP, also tried calling and couldnt hear anything also on the other side no voice.
Im losing confidence that I can get everything work on 5.1 MIUI7
Then I wiped everything expect microSD and wanted to restore backup I made on EU ROM,MM6, but it said read only. Then I flashed 6.10.13 EU ROM and it works everything perfectly here...
Still want to downgrade to MIUI7,5.1 if theres a way to get it all working, because I heard battery is lil better...
Click to expand...
Click to collapse
ah...this is only for battery life?
miui 8 a lot better on battery backup comparing with miui 7. also you got android M with bunch of feature & security update.
if you want better battery, flash xposed & amplify (you can limits nlp wakelock), flash kernel & use darkness/zzmove gov, use adaway or minminguard to remove ads.
still want more? flash stable aosp rom & keep using above way. pure stock android will give you better battery comparing with miui.

Thanks for all this great info!
I used few CM roms for this device, but none of them were working flawless...Which one are you talking about? I tried almost all Nougat based and had a lot of problems, only CM13 from thestrix were the closest, but I like MIUI though... Thank you for your time to help me!

redminote3 said:
Thanks for all this great info!
I used few CM roms for this device, but none of them were working flawless...Which one are you talking about? I tried almost all Nougat based and had a lot of problems, only CM13 from thestrix were the closest, but I like MIUI though... Thank you for your time to help me!
Click to expand...
Click to collapse
give a try for nx rom or aicp, both mm base. i really like both rom stability & feature. almost all my friend using both rom
for N, its still in progress & you won't get stability using N for now. give more time to let dev work & you'll get stable N which better than MM.
you're welcome, enjoy your device & dont bricked it

Thanks man, I flashed NX ROM and its stable and fast so far, also 400MHz unlocked by default ,..Flashed it with pico gapps and kenzo radios.
I want to flash xposed and amplify now, hope xposed doesnt do contra effect.
Thank you again!

Related

TWRP alka backup

Hi everyone, today I tried to go back from Santosh M's CM13 not because it's bad but because for some reason web browsing was very slow (everything else was just fine though, even other internet related features llke Facebook or HD vids on Youtube were blazing fast)...
Anyways, when I made a backup a while ago in TWRP Alka I forgot to uncheck firmware and got an error and now I'm stuck with a locked bootloader (twrp is working fine and I'm on Xiaomi.eu ROM). So I was wondering what I lose out on if I have locked BL and if there is anything significant, I would be VERY THANFUL to anyone who could upload their nand backup somewhere so I can download it. Also, I heard that you can unlock BL from mister Santosh's CM13 but I haven't seen anyone try it before, what's the procedure?
Thank you and have a nice day everyone
Also, the device is Snapdragon variant 32/3
Unfortunately, I didn't get what you wanted to say;But as much as I know, ROMs like Santosh M and some others lock the bootloader after you flash the ROM. So before going back to stock ROM,using your backup file, You need to re-unlock your bootloader first,or you will face boot loop. It can be done easily using Mi-Unlock tool. After that, you can revert back to your MIUI ROM.
fpozar said:
Hi everyone, today I tried to go back from Santosh M's CM13 not because it's bad but because for some reason web browsing was very slow (everything else was just fine though, even other internet related features llke Facebook or HD vids on Youtube were blazing fast)...
Anyways, when I made a backup a while ago in TWRP Alka I forgot to uncheck firmware and got an error and now I'm stuck with a locked bootloader (twrp is working fine and I'm on Xiaomi.eu ROM). So I was wondering what I lose out on if I have locked BL and if there is anything significant, I would be VERY THANFUL to anyone who could upload their nand backup somewhere so I can download it. Also, I heard that you can unlock BL from mister Santosh's CM13 but I haven't seen anyone try it before, what's the procedure?
Thank you and have a nice day everyone
Click to expand...
Click to collapse
Just use miunlock to unlock your bootloader.

Moto E entering directly into the TWRP

Hi, I'm sorry for my bad English, I'm with 1 Moto And first generation that after being looped I was able to unblock and install TWP, and put the Lolipop Rom 5.1, installed without errors, but when I started the android, I set it up and then when I restarted it Device it enters that white screen that appears that the bootloader was unlocked and falls straight into TWRP, does not start Android at all, could they help me? thanks
Nikakz said:
Hi, I'm sorry for my bad English, I'm with 1 Moto And first generation that after being looped I was able to unblock and install TWP, and put the Lolipop Rom 5.1, installed without errors, but when I started the android, I set it up and then when I restarted it Device it enters that white screen that appears that the bootloader was unlocked and falls straight into TWRP, does not start Android at all, could they help me? thanks
Click to expand...
Click to collapse
1. Flash stock lollipop
2. Reboot bootloader
3. Volume up select, Normal powerup
Rajendran Rasa said:
1. Flash stock lollipop
2. Reboot bootloader
3. Volume up select, Normal powerup
Click to expand...
Click to collapse
Guy
Ok, thanks I'll try
Nikakz said:
Guy
Ok, thanks I'll try
Click to expand...
Click to collapse
I tried, accept the installation of Rom, but it is on the screen of the logo starting and it does not leave, I do not know what to do to work.
Nikakz said:
I tried, accept the installation of Rom, but it is on the screen of the logo starting and it does not leave, I do not know what to do to work.
Click to expand...
Click to collapse
Sometimes a new flash takes nearly half an hour to boot. I faced once.. Did u wait for sometime?
vyshak.sk said:
Sometimes a new flash takes nearly half an hour to boot. I faced once.. Did u wait for sometime?
Click to expand...
Click to collapse
Yes, I waited more than 24 hours and nothing and no other flash I tried installs only this one and does not leave the startup logo, very strange this device, I needed a solution.
Nikakz said:
Yes, I waited more than 24 hours and nothing and no other flash I tried installs only this one and does not leave the startup logo, very strange this device, I needed a solution.
Click to expand...
Click to collapse
Flash latest twrp 3.x. You can find it from official lineage os thread under original development section.
Then flash any stable marshmallow custom rom.
_sushan_ said:
Flash latest twrp 3.x. You can find it from official lineage os thread under original development section.
Then flash any stable marshmallow custom rom.
Click to expand...
Click to collapse
Hello everyone, I put a CM13 and she accepted the installation and updated the TWRP also, I put the gaps, I did everything, Android starts, but continues with the problem of falling straight into recovery and going to TWRP and something else when I can do it Start it is not with network signal, recohece the chip, but does not give network signal. I do not know what to do with this device anymore. Could you try to install lolipop on it? Which version could I put? Would it be because of being in 6? I installed this rom cm-13.0-20161022-NIGHTLY-condor only installed it right. thanks
Nikakz said:
Hello everyone, I put a CM13 and she accepted the installation and updated the TWRP also, I put the gaps, I did everything, Android starts, but continues with the problem of falling straight into recovery and going to TWRP and something else when I can do it Start it is not with network signal, recohece the chip, but does not give network signal. I do not know what to do with this device anymore. Could you try to install lolipop on it? Which version could I put? Would it be because of being in 6? I installed this rom cm-13.0-20161022-NIGHTLY-condor only installed it right. thanks
Click to expand...
Click to collapse
Looks like you are using a very old cm 13 build.
Try this one. https://www.androidfilehost.com/?fid=385035244224413102
This is cm 13 snapshot build by @Andersonmends.
Clean install is recommended ie wipe cache data internal and then flash this with pico gapps
Nikakz said:
Hello everyone, I put a CM13 and she accepted the installation and updated the TWRP also, I put the gaps, I did everything, Android starts, but continues with the problem of falling straight into recovery and going to TWRP and something else when I can do it Start it is not with network signal, recohece the chip, but does not give network signal. I do not know what to do with this device anymore. Could you try to install lolipop on it? Which version could I put? Would it be because of being in 6? I installed this rom cm-13.0-20161022-NIGHTLY-condor only installed it right. thanks
Click to expand...
Click to collapse
You flashed latest twrp inside old twrp recovery itself?right?
Rajendran Rasa said:
You flashed latest twrp inside old twrp recovery itself?right?
Click to expand...
Click to collapse
Yes. Out the problem now with the network signal that is not picking up, it recognizes the chip, but it is without signal.
Nikakz said:
Yes. Out the problem now with the network signal that is not picking up, it recognizes the chip, but it is without signal.
Click to expand...
Click to collapse
Flash radio files. Google it for ur device.
_sushan_ said:
Looks like you are using a very old cm 13 build.
Try this one. https://www.androidfilehost.com/?fid=385035244224413102
This is cm 13 snapshot build by @Andersonmends.
Clean install is recommended ie wipe cache data internal and then flash this with pico gapps
Click to expand...
Click to collapse
Hello everyone, I installed Rom CM that the forum colleague indicated and the gapps and installed, everything went well in the installation and initialized Android, was very good in relation to the previous problems, nor know how to thank you. Just when I call it goes to the screen of the fastboot direct and I do not know how to make it not happen, but at least when the motorola logo appears it starts Android. I only notice a certain oscillation in the signal of the network of the operator and I did not find any file to download and to solve this problem of the signal of the network (or radio as you say) if they know where under some that can be installed for that Rom I thank you. I'll leave it for now and see if it's fixing. Thank you very much, ah, I would like to know if I should install the CM updates that appear on the device, it was so good that I'm afraid to accept it and thunder to give it a problem. Another thing he had TV, how to install this Rom? thanks
Hello everyone, I installed Rom CM that the forum colleague indicated and the gapps and installed, everything went well in the installation and initialized Android, was very good in relation to the previous problems, nor know how to thank you. Just when I call it goes to the screen of the fastboot direct and I do not know how to make it not happen, but at least when the motorola logo appears it starts Android. I only notice a certain oscillation in the signal of the network of the operator and I did not find any file to download and to solve this problem of the signal of the network (or radio as you say) if they know where under some that can be installed for that Rom I thank you. I'll leave it for now and see if it's fixing. Thank you very much, ah, I would like to know if I should install the CM updates that appear on the device, it was so good that I'm afraid to accept it and thunder to give it a problem. Another thing he had TV, how to install this Rom? thanks
Nikakz said:
Hello everyone, I installed Rom CM that the forum colleague indicated and the gapps and installed, everything went well in the installation and initialized Android, was very good in relation to the previous problems, nor know how to thank you. Just when I call it goes to the screen of the fastboot direct and I do not know how to make it not happen, but at least when the motorola logo appears it starts Android. I only notice a certain oscillation in the signal of the network of the operator and I did not find any file to download and to solve this problem of the signal of the network (or radio as you say) if they know where under some that can be installed for that Rom I thank you. I'll leave it for now and see if it's fixing. Thank you very much, ah, I would like to know if I should install the CM updates that appear on the device, it was so good that I'm afraid to accept it and thunder to give it a problem. Another thing he had TV, how to install this Rom? thanks
Click to expand...
Click to collapse
You can try flashing radio files.
Find one for your device from this thread : https://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
I m not sure why ur device is rebooting in fastboot. Generally the most common cause for reboot in moto e is faulty lock button. But that jst reboots the phone. You can try using the phone without pressing the lock button. Use volume key wake up option and double tap to status bar to lock.
Also did you wipe cache data internal before flashing ?
And regarding the updates it depends on you. The updates you are for sering are for cm 14 / lineage os. I personally believe that nougat is still not stable enough and features are still missing hence i advised you for mashmallow roms. But if you want to try u can visit the various threads in android development and android development sections and will find nougat roms.
For installing / flashing instructions read guides in general section.
_sushan_ said:
You can try flashing radio files.
Find one for your device from this thread : https://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
I m not sure why ur device is rebooting in fastboot. Generally the most common cause for reboot in moto e is faulty lock button. But that jst reboots the phone. You can try using the phone without pressing the lock button. Use volume key wake up option and double tap to status bar to lock.
Also did you wipe cache data internal before flashing ?
And regarding the updates it depends on you. The updates you are for sering are for cm 14 / lineage os. I personally believe that nougat is still not stable enough and features are still missing hence i advised you for mashmallow roms. But if you want to try u can visit the various threads in android development and android development sections and will find nougat roms.
For installing / flashing instructions read guides in general section.
Click to expand...
Click to collapse
Okay, thank you, it stabilized the signal from the network operator. I will leave as is and will not make updates at the moment. I just want to know how to make the TV function work. Thanks everyone for the help and I do not know how to mark a topic as closed in the forum.

BRICKED?

Hi guys,
On my Kate model I was on NX ROM 10.4 (Android Marshmallow/6) and wiped my phone, because I wanted to update to NX ROM 11 (Android Nougat/7.12). Then I flashed the Kate-Firmware, NX ROM 11 and Gapps and now my phone does not start at all. Black screen and nothing else.
If I hold the power button for a while, the Mi logo is there for half a second and then the phone turns off again, immediately. I can not even enter TWRP. I can only enter Fastboot (the white thing with a cap on and working on a broken android).
Can anyone tell me what to do now?
Okay, this guide brought back my TWRP, at least:
https://xiaomifirmware.com/guides-and-tips/fix-bricked-redmi-note-3-pro-special-edition/
Maybe this helps other users, too.
I tried to flash NX ROM 11 and the Kate-Firmware from the same page again and my phone got ****ed again.
So, I can definitively say: Do not use that firmware! Somehow it messes up the phone.
xsycox said:
I tried to flash NX ROM 11 and the Kate-Firmware from the same page again and my phone got ****ed again.
So, I can definitively say: Do not use that firmware! Somehow it messes up the phone.
Click to expand...
Click to collapse
I Think this firmware only lock your bootloader.. try using adb to check if bootloader is still unlocked or not.
If is locked just unlock again and should solve your problem
xsycox said:
I tried to flash NX ROM 11 and the Kate-Firmware from the same page again and my phone got ****ed again.
So, I can definitively say: Do not use that firmware! Somehow it messes up the phone.
Click to expand...
Click to collapse
may be u had unlocked ur kenzo using unofficial meyhod

Bootloop on "newer" roms even after factory wipe

Hello everyone,
i got a Redmi Note 3 pro for a friend some while ago, since i dont wanted to stick to MIUI, i just flashed ResurrectionRemix since this was the most used costum rom back then.
My friend now suddenly has the problem that his phone just bootloops all the time. So i tried upgrade the rom to a newer version but it just keept bootlooping.
I also already tried formating the data partition as well as the storage but nothing helped so far. I even tried a few different roms but no difference there either.
But the weired thing is that i found an really old full backup (1.5 years old, only system and data) of the rom he used before and when i flash that, it just works fine.
I really dont wanna go back to that old and buggy rom so is there something else i could do to fix this problem?
Have you tried flashing a newer firmware? IIRC there's a thread that includes links to all the past and latest firmwares for kenzo.
TomTheDragon87 said:
Hello everyone,
i got a Redmi Note 3 pro for a friend some while ago, since i dont wanted to stick to MIUI, i just flashed ResurrectionRemix since this was the most used costum rom back then.
My friend now suddenly has the problem that his phone just bootloops all the time. So i tried upgrade the rom to a newer version but it just keept bootlooping.
I also already tried formating the data partition as well as the storage but nothing helped so far. I even tried a few different roms but no difference there either.
But the weired thing is that i found an really old full backup (1.5 years old, only system and data) of the rom he used before and when i flash that, it just works fine.
I really dont wanna go back to that old and buggy rom so is there something else i could do to fix this problem?
Click to expand...
Click to collapse
If u unofficially unlocked bootloader
Then U need latest miui rom bootloader. First update to latest miui 10 fastboot rom using pc. then unlock and install twrp .
Then ur custom roms will boot.
If u have unlocked ur bootloader officially using miunlock tool. then just flash latest firmware which includes emmc. This will directly update ur bootloader. Then u can flash custom roms.

No signal after flashing custom ROM even though SIM card is detected and IMEI is fine

Hello
2 days ago i was trying to flash LineageOS 17.1 on my redmi note 3 (kenzo). Here it said i need latest MIUI GS 10.2.1.0 so i flashed it using TWRP, rebooted, then tried to flash LineageOS but i couldn't because i got error 7 "this package is for device kate kenzo this device is ." so i googled it and found a post here by user LeoYL that i need to change lines in META-INF/com/google/android/updater-script and i just deleted those lines since my device for some reason wasnt recognised as neither kenzo nor kate, then i could flash without any problems, then i rebooted again and flashed those gapps. When i rebooted to system, my SIM card was not detected, my IMEI was shown as "unknown" and my WI-FI wasnt working either (i dont know if bluetooth worked, i didnt check since i never really use it anyway).
After that i thought it was some sort of LineageOS problem, so i tried flashing Bliss and Evolution-X but had same problems on those.
Before all of this i was using LineageOS 14.1 for like 3 or 4 years (a long time anyway) and right before flashing MIUI 10.2.1.0 everything was working perfectly fine. I'm also 100% sure my phone is Kenzo since MIFlash won't let me flash any Kate software but Kenzo software is getting flashed with no problems. I tried to fastboot flash MIUI 10.1.1.0 for Kenzo (i couldn't find fastboot flash for 10.2.1.0, so i flashed 10.1.1.0), 10.2.1.0 for Kate, (i deleted lines in flash_all_lock.bat responsible for checking whether device is Kate or Kenzo and then MiFlash let me flash it) but it wasn't working on both.
I checked 3 different SIM cards, two different ones for slot 1, and one for slot 2, none of them worked on my phone while they worked fine on 2 other phones i have.
Ever since then i was trying to fix this and after countless attempts, with this guide's help i managed to get my phone to a state in which my WI-FI is working, SIM card is detected, IMEI is there, but still i have no signal. This guide says that i need to flash the QCN file but i didn't backup mine so i tried flashing the one in attachments and all it did was make my phone again not detect any SIM card, IMEI shown as unknown and WI-FI not working. I found another QCN file in some XDA thread (cant find it right now) and flashed it but it didn't fix my issue.
Sorry that this post is quite long but i wanted to include all info i can. I hope that someone actually can figure out what is wrong with my phone. Thanks in advance for all replies.
fonvi said:
Hello
2 days ago i was trying to flash LineageOS 17.1 on my redmi note 3 (kenzo). Here it said i need latest MIUI GS 10.2.1.0 so i flashed it using TWRP, rebooted, then tried to flash LineageOS but i couldn't because i got error 7 "this package is for device kate kenzo this device is ." so i googled it and found a post here by user LeoYL that i need to change lines in META-INF/com/google/android/updater-script and i just deleted those lines since my device for some reason wasnt recognised as neither kenzo nor kate, then i could flash without any problems, then i rebooted again and flashed those gapps. When i rebooted to system, my SIM card was not detected, my IMEI was shown as "unknown" and my WI-FI wasnt working either (i dont know if bluetooth worked, i didnt check since i never really use it anyway).
After that i thought it was some sort of LineageOS problem, so i tried flashing Bliss and Evolution-X but had same problems on those.
Before all of this i was using LineageOS 14.1 for like 3 or 4 years (a long time anyway) and right before flashing MIUI 10.2.1.0 everything was working perfectly fine. I'm also 100% sure my phone is Kenzo since MIFlash won't let me flash any Kate software but Kenzo software is getting flashed with no problems. I tried to fastboot flash MIUI 10.1.1.0 for Kenzo (i couldn't find fastboot flash for 10.2.1.0, so i flashed 10.1.1.0), 10.2.1.0 for Kate, (i deleted lines in flash_all_lock.bat responsible for checking whether device is Kate or Kenzo and then MiFlash let me flash it) but it wasn't working on both.
I checked 3 different SIM cards, two different ones for slot 1, and one for slot 2, none of them worked on my phone while they worked fine on 2 other phones i have.
Ever since then i was trying to fix this and after countless attempts, with this guide's help i managed to get my phone to a state in which my WI-FI is working, SIM card is detected, IMEI is there, but still i have no signal. This guide says that i need to flash the QCN file but i didn't backup mine so i tried flashing the one in attachments and all it did was make my phone again not detect any SIM card, IMEI shown as unknown and WI-FI not working. I found another QCN file in some XDA thread (cant find it right now) and flashed it but it didn't fix my issue.
Sorry that this post is quite long but i wanted to include all info i can. I hope that someone actually can figure out what is wrong with my phone. Thanks in advance for all replies.
Click to expand...
Click to collapse
I think u were using old twrp.
If u get error 7. Then u should use twrp 3.3.1 latest official.
Never flash miui rom using twrp. Always cLean flash fastboot rom using pc.
Black_Stark said:
I think u were using old twrp.
If u get error 7. Then u should use twrp 3.3.1 latest official.
Never flash miui rom using twrp. Always cLean flash fastboot rom using pc.
Click to expand...
Click to collapse
Yes when i was flashing for the first time i was still on twrp 3.1
Right now i have twrp 3.3.1, i flashed miui 10.2.1.0 using fastboot then flashed LineageOS 17.1 and it didnt change anything. My phone detects SIM card but i have no signal, when i try to call someone i get an error that says i need to turn off airplane mode so i tried turning it on and off but it didnt fix anything.
fonvi said:
Yes when i was flashing for the first time i was still on twrp 3.1
Right now i have twrp 3.3.1, i flashed miui 10.2.1.0 using fastboot then flashed LineageOS 17.1 and it didnt change anything. My phone detects SIM card but i have no signal, when i try to call someone i get an error that says i need to turn off airplane mode so i tried turning it on and off but it didnt fix anything.
Click to expand...
Click to collapse
Thats what happen when u dont know the simple thing about what model u r using. And remain confuse Whether u bought kenzo or kate. ?
And u keep on experimenting and flashing kenzo , kate, kenzo, kate on ur phone to try some luck and finally destroys ur modem.
What makes u thing that if calls doesnt work on miui but it will work on los 17 rom.
Did u official unlock ur bootloader??
Black_Stark said:
Thats what happen when u dont know the simple thing about what model u r using. And remain confuse Whether u bought kenzo or kate. ?
And u keep on experimenting and flashing kenzo , kate, kenzo, kate on ur phone to try some luck and finally destroys ur modem.
What makes u thing that if calls doesnt work on miui but it will work on los 17 rom.
Did u official unlock ur bootloader??
Click to expand...
Click to collapse
Yes i have unlocked bootloader in official way.
I wasnt confused whether my phone is kenzo or kate, i knew it was kenzo. I only started "experimenting" because i was looking for a solution to my problem on google and there were a lot of different guides on fixing my phone. I flashed kate MIUI once to "try my luck" as you said. Modem got broken probably after flashing MIUI using TWRP instead of fastboot when i was flashing before first attempt at installing lineageos 17.1. To be honest I didn't know that it makes any difference. When i bought the phone a couple of years ago I flashed lineageos 14.1 without any problems and it was just working so I didn't really expect anything to go wrong this time.
Anyway, i know what i did was quite stupid when i look at it from today's perspective, i am just looking for a way to fix it now :/
fonvi said:
Yes i have unlocked bootloader in official way.
I wasnt confused whether my phone is kenzo or kate, i knew it was kenzo. I only started "experimenting" because i was looking for a solution to my problem on google and there were a lot of different guides on fixing my phone. I flashed kate MIUI once to "try my luck" as you said. Modem got broken probably after flashing MIUI using TWRP instead of fastboot when i was flashing before first attempt at installing lineageos 17.1. To be honest I didn't know that it makes any difference. When i bought the phone a couple of years ago I flashed lineageos 14.1 without any problems and it was just working so I didn't really expect anything to go wrong this time.
Anyway, i know what i did was quite stupid when i look at it from today's perspective, i am just looking for a way to fix it now :/
Click to expand...
Click to collapse
Kate comes with extra band 20. U cant flash kate modem files on kenzo. Hardware wont accept it.
Kate miui rom also contains kate modem files.
Try to Flash kenzo old fastboot rom. May be older miui 7 based on lollipop.

Categories

Resources