ASUS ZenWatch2 WI501Q Firmware Version Marshmallow 6.0.1 M6E69N September 1 Patch - Release Note:
1. Fix security vulnerabilities ( Update to Sep 2016 of Android Security Bulletins )
2. Fix issue "Watch could not pair with iPhone 7"
=====================================================================
How to update your ZenWatch:
Settings > About > System updates > System will download the update file and start the system update.
Important notice:
1.Please make sure your mobile phone can reach internet.
2.Please update“Google Play Service”to 9.0.83 or above version. (How to check : (On mobile phone)Settings> Apps > Google Play services).
3.Please update“Android Wear”to 1.5.0.2951640 or above version. (How to check : (On mobile phone)Settings> Apps > Android Wear).
4.Please make sure mobile phone and ZenWatch are connected and stay close to each other during the update.
5.Please make sure ZenWatch is in charge status during the update.
6.Please be patient and aware of that update time will depend on the quality of internet access.
7.After update finished, system will restart automatically. Please check the version via “(On Watch) Settings > About > Build number”.
Original Source Link:
https://www.asus.com/in/ZenWatch/ASUS_ZenWatch_2_WI501Q/HelpDesk_Download/
My Youtube Review:
I don't even notice it until I check my watch and it was installed without my knowledge
Zenroid said:
I don't even notice it until I check my watch and it was installed without my knowledge
Click to expand...
Click to collapse
I was formatting OS and after reboot I have noticed it:laugh:
New January 1st patch is available :fingers-crossed:
I wonder when they ll release wear2.0 for this watch
Related
Instructions to enable USB Debugging mode
Start the Phone application
Type * # 84936 # – The numbers 84936 actually spell out TIZEN
Select Icon to enable Developer Option
Open the Settings application
Scroll to the bottom and you will see the new Developer Options submenu
Select the icon next to USB Debugging
How to take screenshots:
1. Press the HOME button + POWER button simultaneously to take screenshot
2. Connect your device to PC/Laptop via USB
3. Go to Phone->Images->Screenshots, copy the screenshot taken for this problem and attach to your bug report.
How to enable "CP Silent Log" on the device(for network issues i.e. calls, data:
1. Press this key combination *#9900#
2. Click on "CP Silent Log"
3. Select "[cp0] ON (ARM+DSP)
4. Exit this menu
5. Re-run the problem scenario
6. Please take log dump as per below procedure and share.
How to take logs from the device:
NOTE: If you are facing problems with respect to network scenarios(i.e. calls, data etc), please enable "CP Silent Log" before proceeding further.
1. As soon as you encounter the problem, press this key combination *#9900#
2. Select Run LOG_DUMP
3. Once this activity gets over, Connect your device to PC/Laptop via USB.
4. Go to Phone->SLP_debug.
5. Copy the file(s) in this folder(usually they are named log_dump_yyyymmddhhmmss.tar.gz) and attach to you bug report.
You can access the Tizen System recovery mode by pressing Home + Volume Up + Power button to power up
The recovery mode on Z3 has following options
1. Reboot System Now : Reboots normally without doing anything
2. Safe Mode : Only preloaded applications work in safe mode
3. Phone Reinitialization
4. Restore System from SD-Card
Soft Reset (this, i did not try yet):
Step 1:
Open dial pad.
Step 2:
Just type *2767*2878# or .*2767*3855#
Step 3:
Wait After few second the mobile device will reboot and smartphone is formatted.
http://developer.samsung.com/remotetestlab/rtlDeviceList.action
If somebody have no Z3...
SM-Z300H is now online available in RTL. :good:
Thanx.
Best Regards
RTL?!..
Remote Test Lab
Gear S2 and Samsung Z3 are now available!
On the 18th Nov, Samsung Z3(SM-Z300H) and Gear S2(SM-R730S) devices are added on the Remote Test Lab service. We're really pleased to provide you with new Tizen mobile and wearable devices.
Click to expand...
Click to collapse
Your thread title is nice...
So I have hijacked.
Best Regards
yeah, finally found out about RTL..
thanks! welcome aboard.
i am trying to start developing...
http://www.tizenappchallenge.in/
Welcome to the INDIA TIZEN APP CHALLENGE 2015
Here is a wonderful opportunity for all Indian developers to win big rewards for their App development skills. All you need to do is create new Apps on Tizen Mobile Platform or port your existing Android apps and submit them to the Tizen Store. You can submit as many apps as you want!
Click to expand...
Click to collapse
Only as info...
best Regards
@bogdan_wrc
Is it possible that sometime an android port is possible for samsung z3 tizen phone?
Update:
This phone has Spreadtrum SC7730S SOC platform
Please check this link:
The last line mentions this:
Overall, SC7730S chip set presents a high cost-effective platform for Android mobile devices.
So this soc is made for android, what are the chances for an android port for this device...? I am hopeful.
anything is possible...just to be a will..
but,why would you do that?
tizen is lighter...uses less battery. requires also cheaper hardware to use...
better than that...we should consider porting apps to tizen..
https://developer.tizen.org/development/tools/download#2.4
New SDK 2.4 Rev 1 available.
Release Notes:
https://developer.tizen.org/development/tools/download/release-notes/2.4-rev1-dec-1-2015
Note
Tizen 2.4 Rev1 SDK supports developing an application on multi-platform environments. In the 2.4 Rev1 SDK, you can also develop 2.3.1 based applications.
From Tizen 2.4 Rev1, the SDK image installation is not officially supported. Use the Tizen package server for installation.
- Download Tizen 2.4 Rev1 SDK : 2.4
- Download Tizen 2.3.1 Rev1 SDK : 2.3.1
Click to expand...
Click to collapse
Best Regards
https://developer.tizen.org/development/tools/download
SDK 2.4 Rev 2 is online.
Best Regards
Meanwhile on FCC are the internal and external Pics available from SM-Z300H... and few more PDFs...
Best Regards
link please?
You can search via FCC-ID
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
Enter for Grantee Code:
a3l
Product Code:
smz300
Press search...
Best Regards
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647/page69
With this Tool it is possible to download Firrmware... to use with ODIN.
"Normal" and 4 parts Version for repair/study... :good:
Binary Nature have to be selected.
PIT file is for instance here:
http://www.easy-firmware.com/index.php?a=browse&b=category&id=6740
CAUTION!
4 part Version makes Factory Reset... INIT...
Because additional files inside:
Code:
system-data.img
user.img
Best Regards
https://wiki.tizen.org/wiki/SamsungZ3
Interesting.
Best Regards
Edit 1.
The Z3 can be rooted identically to the process for the Z1 (download a stock firmware image, extract it, mount the rootfs.img, and add "su" to the bin folder, then flash with Heimdall)...
Click to expand...
Click to collapse
:angel:
Oh... found something usefull about Tizen Kernel etc...
Thanx Google search.
http://nyx.skku.ac.kr/wp-content/uploads/2016/03/Lecture1.pdf
http://nyx.skku.ac.kr/wp-content/uploads/2016/03/Lecture2.pdf
http://nyx.skku.ac.kr/wp-content/uploads/2016/03/Lecture3.pdf
Best Regards
Edit 1.
Memo to me...
http://www.acmesystems.it/arm9_toolchain
Interesting read.
So, in theory it is possible to create custom image for say Z3, and install it with few steps!?
Vikram Dattu said:
Interesting read.
So, in theory it is possible to create custom image for say Z3, and install it with few steps!?
Click to expand...
Click to collapse
Yes it's possible in theory, but need time and some skills.
Sent from my SM-G930F using XDA-Developers Legacy app
ASUS ZenWatch2 WI501Q firmware version: M6E69V release note
1. Fix security vulnerabilities ( Update to Dec 2016 of Android Security Bulletins )
=====================================================================
How to update your ZenWatch:
Settings > About > System updates > System will download the update file and start the system update.
Important notice:
1. Please make sure your mobile phone can reach internet.
2. Please update“Google Play Service”to 9.0.83 or above version. (How to check : (On mobile phone)Settings> Apps > Google Play services).
3. Please update“Android Wear”to 1.5.0.2951640 or above version. (How to check : (On mobile phone)Settings> Apps > Android Wear).
4. Please make sure mobile phone and ZenWatch are connected and stay close to each other during the update.
5. Please make sure ZenWatch is in charge status during the update.
6. Please be patient and aware of that update time will depend on the quality of internet access.
7. After update finished, system will restart automatically. Please check the version via “(On Watch) Settings > About > Build number”.
Anyone have the update zip they can share?
I'm agree too, can someone please share the twrp restorable backup or sth else that we can flash in on our devices? I have country restrictions in here and I can't download latest firmware via settings ?
Feel tired of Watch Helper companion app (Finow X5+, LEMFO LEM5 smartwatches) alerts&sounds when watch disconnected? Try this module!
It's really simple thing - just install and choose what you want to get rid of: disconnection sound (awful!) and/or alert window.
Requirements:
- Android 5.0 or better
- Xposed installed (API v82)
Download:
Direct apk download WatchHelper Fixer v1.0.0
or just find it in Xposed Modules Repo.
Issue tracker:
Please, use github tracker for issues. Logcat really helps
Further development plans:
I'm short of free time, so any clever developer with X5+ or LEM5 smartwatch is welcome And some feature request also.
XDA:DevDB Information
WatchHelper Fixer, Xposed for all devices (see above for details)
Contributors
rufik
Source Code: https://github.com/rufik/WatchHelper-Fixer
Xposed Package Name: pl.rufik.watchhelperfixer
Version Information
Status: Stable
Current Stable Version: 1.0.0
Stable Release Date: 2017-02-15
Created 2017-02-16
Last Updated 2017-02-16
Hi,
I was also very tired of the bt interrupt notification alert of the Watch helper app. I found a way to create your own apk installation file without these alert and would like to describe that as short as possible (no Xposed needed):
1. Download the latest official watch helper apk file from the net to your PC
2. Open that file with zip program (I used “7-zip” for example)
3. Select the folder “res” -> “raw”
4. Erase the file “bt_prxr_link_loss_alert.ogg”
5. Create an empty text file, rename it completely in “bt_prxr_link_loss_alert.ogg” and copy it into the opened archive -> confirm with “yes”
6. Save the apk under a custom name or just close the opened archive of the zip program
Now install these apk on your smartphone and check it, by disabling the BT on your smartwatch. The BT loss message will appear on your screen, but no alert sound!!!
I hope this is a good solution for you. There is a way by using a xposed module, but this should be also usable without xposed.
I can't use the solution with xposed, because I'm on Android 7.0.
Marcaay said:
.....Now install these apk on your smartphone and check it, by disabling the BT on your smartwatch. The BT loss message will appear on your screen, but no alert sound!!!
I hope this is a good solution for you. There is a way by using a xposed module, but this should be also usable without xposed.
I can't use the solution with xposed, because I'm on Android 7.0.
Click to expand...
Click to collapse
Hello,
is a new version of the application. I tried to follow your instructions but when you try to install it will show the message that "the application can not be installed, the installation file is corrupted" Can you help somehow? Can I ask for direct treatment from you?
uloz.to/!C6KJzgONXayQ/com-android-bluetoothsockettest-apk
Thank you very much and excuse my very poor English
Tealc.EU said:
Hello,
is a new version of the application. I tried to follow your instructions but when you try to install it will show the message that "the application can not be installed, the installation file is corrupted" Can you help somehow? Can I ask for direct treatment from you?
uloz.to/!C6KJzgONXayQ/com-android-bluetoothsockettest-apk
Thank you very much and excuse my very poor English
Click to expand...
Click to collapse
Hi,
i'm no more working on the Watchhelper app. I would recommend to use the "Watch Droid Phone + Assistent (on the watch)" from Google Play Store. This is great and will get more improvements in the future
Upgrade to Nougat for Huawei P9 Plus VIE-L09CO2 (Vodafone) is in place.
Good evening to the whole group. I am trying to download it through 'Firmware Finder',
but I would say to all those concerned, with the brand "Vodafone" which is output upgrade to Nougat with version VIE-L09C03B334. I hope that somewhere they can mettre the zipped file so it can be used with 'dload'.
Dear friends of the group to me I got the update successfully completed. As I said I used 'Firmware Finder', using the guidelines in the file that I enclose. hoping that you understand that since the re-translation has made Google Translation ', a post to a thread that is on the XDA forum. Good update to you.
Follow my instructions
- Make sure you are on VIE-L09C432B181
- Make sure the battery over 60%
- Now make a backup from your PC with HiSuite
- Now install the firmware Finder from the Play Store (link)
- Now go to Settings -> Advanced Settings -> Security -> Device Administration - >> NOW activate "Unknown sources"
- Now Open Firmware Finder and select the model (eg: VIE-L09C432)
- Now click on "GET FIRMWARE LIST"
- Now go to the Finder firmware settings and activate "Installing via system update"
- You will see a pop up "Huawei Firmware Proxy Finder" click "download ADDON"
- When the download is complete, install on your phone and open it
- Re open the finder firmware settings and check if "Installation using the updated" activated system, if you do not activate it for the 2nd time
- Now the firmware Finder and select the model as VIE-L09C432 (only if the model has this)
- Now click on "GET FIRMWARE LIST" and select first one where you see "VIE-L09C432B360" Date: 03/03/2017 TypeTA Size: 1.334GB
- If you selected "VIE-L09C432B360" Now you will see an option "Send Firmware Updater" click it
- Now it will automatically open a page "Firmware Finder Proxy"
- Now go to the Wi-Fi and connect to a Wi-Fi and Now "Network Edit" then "Show Advanced Options" Now select "Proxy" as "Manuel"
- In writing on the proxy host name: localhost
- In writing on the proxy port: 8080
- Now go to Settings -> System Update now, and click "Check for updates"
- Now you are going to see the name of an update "VIE-L09C432B360VIE-L09C432B360 -1,430,186,368.00 B" do not download this! this is not the right one!
- Back to System Update and you'll still get this the wrong update, do not worry, click on "MENU" and click on "Download the latest full package"
- You will now see the correct update "VIE-L09C432B360 2.39 GB" Now just click "hotfix"
- Do not download it, do not worry, just go to the Wi-Fi settings and disable "Proxy"
- Go back to the system upgrade and click pause and resume
- Wait until the end of the download, and after the phone will automatically install the update has been downloaded
If you have followed my instructions, it will be installed with B360 success.
Obviously you have to follow the signs quele for your version of firmware and that all root functions and how this suite if you had the miss and the directions that are on this forumo apply unfortunately for Andorid 6 'Marshmallow'.
Sorry for any typos or language.
Download fails at 74 %
Try´d this not working download fails at 74 %
Grlschia said:
Upgrade to Nougat for Huawei P9 Plus VIE-L09CO2 (Vodafone) is in place.
Good evening to the whole group. I am trying to download it through 'Firmware Finder',
but I would say to all those concerned, with the brand "Vodafone" which is output upgrade to Nougat with version VIE-L09C03B334. I hope that somewhere they can mettre the zipped file so it can be used with 'dload'.
Dear friends of the group to me I got the update successfully completed. As I said I used 'Firmware Finder', using the guidelines in the file that I enclose. hoping that you understand that since the re-translation has made Google Translation ', a post to a thread that is on the XDA forum. Good update to you.
Follow my instructions
- Make sure you are on VIE-L09C432B181
- Make sure the battery over 60%
- Now make a backup from your PC with HiSuite
- Now install the firmware Finder from the Play Store (link)
- Now go to Settings -> Advanced Settings -> Security -> Device Administration - >> NOW activate "Unknown sources"
- Now Open Firmware Finder and select the model (eg: VIE-L09C432)
- Now click on "GET FIRMWARE LIST"
- Now go to the Finder firmware settings and activate "Installing via system update"
- You will see a pop up "Huawei Firmware Proxy Finder" click "download ADDON"
- When the download is complete, install on your phone and open it
- Re open the finder firmware settings and check if "Installation using the updated" activated system, if you do not activate it for the 2nd time
- Now the firmware Finder and select the model as VIE-L09C432 (only if the model has this)
- Now click on "GET FIRMWARE LIST" and select first one where you see "VIE-L09C432B360" Date: 03/03/2017 TypeTA Size: 1.334GB
- If you selected "VIE-L09C432B360" Now you will see an option "Send Firmware Updater" click it
- Now it will automatically open a page "Firmware Finder Proxy"
- Now go to the Wi-Fi and connect to a Wi-Fi and Now "Network Edit" then "Show Advanced Options" Now select "Proxy" as "Manuel"
- In writing on the proxy host name: localhost
- In writing on the proxy port: 8080
- Now go to Settings -> System Update now, and click "Check for updates"
- Now you are going to see the name of an update "VIE-L09C432B360VIE-L09C432B360 -1,430,186,368.00 B" do not download this! this is not the right one!
- Back to System Update and you'll still get this the wrong update, do not worry, click on "MENU" and click on "Download the latest full package"
- You will now see the correct update "VIE-L09C432B360 2.39 GB" Now just click "hotfix"
- Do not download it, do not worry, just go to the Wi-Fi settings and disable "Proxy"
- Go back to the system upgrade and click pause and resume
- Wait until the end of the download, and after the phone will automatically install the update has been downloaded
If you have followed my instructions, it will be installed with B360 success.
Obviously you have to follow the signs quele for your version of firmware and that all root functions and how this suite if you had the miss and the directions that are on this forumo apply unfortunately for Andorid 6 'Marshmallow'.
Sorry for any typos or language.
Click to expand...
Click to collapse
This works takes time but it work´s
[email protected] said:
This works takes time but it work´s
Click to expand...
Click to collapse
The problem that the downloading takes a bit of time because the package is 2.6 GB. I even though the fiber 100 took almost a quarter of an hour. Then there is also the fact that the server knows where the file can be blocked by our connections. Try several times. One important thing and that the proxy anyway before starting the actual download is disabled.
I followed the steps, but I find myself with a version probably wrong, NRD90M test-keys, what should I do? Many basic functions do not work, I don't even have access to update function in settings.
bayers97 said:
I followed the steps, but I find myself with a version probably wrong, NRD90M test-keys, what should I do? Many basic functions do not work, I don't even have access to update function in settings.
Click to expand...
Click to collapse
I do not know which version of firmware you had, because I specified that ranged follow the directions according to the Roma who had one installed. My advice and try all over again. Keep in mind that just ago, having again put the VIE-L09C02B133 version and installing the new version directly using the TWRP recovery, me too I came out the same words 'NRD90M test-keys' that came out to you. In fact, now I'm starting all over again, starting to come from the VIE-L09C02B128 version and to follow.
I have an Android music player that’s wanting to update the firmware. It’s an Astell and Kern SP1000 running Android 6.0.1 Marshmallow, API 23, build MMB29T.
There is no disable updates in the settings. The update is for the players firmware. I don’t believe it’s updating the whole Android OS. I could be wrong.
After firmware 1.16 I am no longer able to install apps Astell and Kern haven’t authorized. So I wouldn’t be able to install a file explorer or other streaming apps I persanly like using. If I knew they were planing on controlling the app so much I’d still be useing a phone with a DAC.
I currently have root by using the King root. I’m able to edit system files. I edited the host file blocking the update server. Yet the player has already downloaded an update and I can’t locate the file to delete it.
I’m constantly receiving the update notice about 10 times a day. The notification isn’t a normal notification. It’s a full screen overlay.
1. I would like to disable updates by altering some system file.
2. Also disable the notification.
3. Locate the FW file and delete it.
Thank you for the help.