Related
It is posible to go from froyo to gingerbread or oxygen on Huawei U8160 (a.k.a. Vodafone 858 Smart)?If yes please teach me how.Thanks!
search google for SmartLucky rom for the 858. Its awesome even though its not gingerbread. Has multitouch too.
Does anybody knows if it is possible to flash the original wpa_supplicant (v 6.1) with the hacked version to see ad-hoc networks ? or can be anything else done ?
i saw smart lucky,but i don't understand italian.if you can translate the steps to install it i will be forever gratefull to you.
I've installed the smartlucky on my vodafone smart (italian) and works very well. I'm italian, i try to translate the instruction for the italian forum to install this rom
Prerequisite: the telephone must be rooted and the the recovery Clockworkmod 4.0.0.2 or above must be already installed (if you need instructions this steps I can translate it from the same forum)
Instructions:
1: Download the rom from the link in the italian forum (the latest build is 2.1.729, the 2.1.1 is only un update and must be installed after the main build)
2: Copy the file SmartLucky2.*.zip into the sd of your phone
3: Enter in recovery mode with colckworkmod (shutdown the phone and press and bring pressed volume-up + power on simultaneously till the load of the clockworkmod)
4: It is better to do a backup of your actual rom with the backup & restore menu (this step is optional but is better to do it in case of problem)
5: Go down with the key Volume down to the menu "Wipe data/factory reset" e confirm with the key power on. Select and confirm Yes -- delete all user data.
6: Go back to the main menu and choos "Install zip from sdcard".
7: Now choose the file "SmartLucky2.*" that you have previsuously insert to the sd card (point 2). Now the installation will start.
8: wait the end of the installation and go back to the main menu and choose "reboot system now".
9: now the phone will restart. The first restart is very very very long, please be patient!
For install the 2.1.1 update the procedure is the same, but you don't need to do the point 5
After the boot you need to launch no-frilld cpu to set the overclock of the cpu (if you want).
The differences from the stock rom are a lots, the principals (about me) are:
1: cpu overclock e underclock
2: photo-camera bring up to 3 Mpixel
3: multitouch enabled
Pay attention: the rom have a littel bug (actually unresolved, due to the multitouch): The back key of the phone is a bit moved to left respect the sign. It's not a problem to use, but is important to know that is necessary tap a bit to left respect the original.
If you need other info please ask me. I'm sorry for my error in the translation but I'm italian
thank you very much!I cannot entry in recovery mode .I tried as you said but it's just showing the hourglass and black screen.
you have to bring pressed VOLUME UP + POWER BUTTON also during the hourglass screen. Don't release buttons before the recovery mode is active.
did it work?
did it work? is it any better?
im thinking of getting it from vodafone.. only if it gets performance with the upgrade.
hope its in english.
Noob here..
Please use the Q&A Forum for questions Thanks
Moving to Q&A
drake762001 said:
I've installed the smartlucky on my vodafone smart (italian) and works very well. I'm italian, i try to translate the instruction for the italian forum to install this rom
Prerequisite: the telephone must be rooted and the the recovery Clockworkmod 4.0.0.2 or above must be already installed (if you need instructions this steps I can translate it from the same forum)
Instructions:
1: Download the rom from the link in the italian forum (the latest build is 2.1.729, the 2.1.1 is only un update and must be installed after the main build)
2: Copy the file SmartLucky2.*.zip into the sd of your phone
3: Enter in recovery mode with colckworkmod (shutdown the phone and press and bring pressed volume-up + power on simultaneously till the load of the clockworkmod)
4: It is better to do a backup of your actual rom with the backup & restore menu (this step is optional but is better to do it in case of problem)
5: Go down with the key Volume down to the menu "Wipe data/factory reset" e confirm with the key power on. Select and confirm Yes -- delete all user data.
6: Go back to the main menu and choos "Install zip from sdcard".
7: Now choose the file "SmartLucky2.*" that you have previsuously insert to the sd card (point 2). Now the installation will start.
8: wait the end of the installation and go back to the main menu and choose "reboot system now".
9: now the phone will restart. The first restart is very very very long, please be patient!
For install the 2.1.1 update the procedure is the same, but you don't need to do the point 5
After the boot you need to launch no-frilld cpu to set the overclock of the cpu (if you want).
The differences from the stock rom are a lots, the principals (about me) are:
1: cpu overclock e underclock
2: photo-camera bring up to 3 Mpixel
3: multitouch enabled
Pay attention: the rom have a littel bug (actually unresolved, due to the multitouch): The back key of the phone is a bit moved to left respect the sign. It's not a problem to use, but is important to know that is necessary tap a bit to left respect the original.
If you need other info please ask me. I'm sorry for my error in the translation but I'm italian
Click to expand...
Click to collapse
I need help for rooting the mobile and for installing the recovery Clockworkmod 4.0.0.2 or above. My menu only state:
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
touchscreen firmware up
Thanks for the assistance. I'm really new on Android...
miazza
I solved ... reading and reading at the end I found the solution
can you please tell me how to get clockworkrecovery???
visit the YouTube vid:
How to install SmartLucky ROM onto your Vodafone 858 -
its in english
Can somebody please give me some sort of instructions on how to backup my stock rom before i install smartlucky?
THANKS!
RoboRAWRR... said:
Can somebody please give me some sort of instructions on how to backup my stock rom before i install smartlucky?
THANKS!
Click to expand...
Click to collapse
From the boot menu choose the back-up option that's all !!!
miazza
You can install CM7.It works very well>I use it right now
GIANNHSKZ said:
can you please tell me how to get clockworkrecovery???
Click to expand...
Click to collapse
Have you rooted your phone?
HELP!! someone with vodafone 858 phone could upload their backup or system.img file. plz!! help my phone it stuck on boot screen
Vodafone to launch mobile money transfer service
LONDON— Vodafone, which owns 65% of Vodacom, will launch an international mobile money transfer service as part of a wider expansion of the M-Pesa platform, which has become a popular payment system in countries such as Kenya.
M-Pesa was launched by Vodafone in 2007, and has become a quasi-currency because it is used so widely in Kenya. It is also available in other African countries such as South Africa and Tanzania.
Vodafone is expected to announce this week that the M-Pesa platform will be available across borders, allowing customers in countries that have adopted the system to send money from overseas.
Mobile-payment systems are a growing focus for telecoms groups that see both a means of attracting and keeping customers and a new way to generate revenue through associated activities, such as advertising and discount coupons.
However, few have been as successful as M-Pesa. Its attraction lies in a technologically simple text message-based transfer system that allows people to be paid, and pay, using their cellphones. The advantages of security and low transaction costs have helped its popularity in countries where many people do not have a bank account.
M-Pesa will be connected to an international remittance hub called HomeSend — operated by Bics, a money transfer company — which covers more than 21 money transfer businesses in 35 countries.
The expansion of the service comes as Vodafone seeks to increase the mobile money business in other countries, and beyond basic payment systems into other areas of financial services such as insurance and banking. M-Pesa is used by more than 15-million customers, generating more than 165-million transactions a month.
The platform is already being tested in India, for example, which is seen by the UK-listed telecoms group as a potentially vast market for the service. Other countries will be looked at, according to those familiar with the service. Vodafone declined to comment, although a spokesman said it was always exploring options for expansion of the platform.
Vodafone owns 40% of Safaricom, the leading mobile operator in Kenya, and has identified demand among many Kenyans working abroad to send money home using a secure mobile transfer service.
Separately, the UK’s leading mobile operators will unveil their joint commerce platform this week using the new name "Weve" ahead of an official launch in November.
The new company, which had been code named "Project Oscar", will market a "digital wallet" scheme that has been backed by EE, O2 and Vodafone. This platform will allow third-party debt and credit cards to be stored on a secure service on the phone to be used as payment.
Source
ardit123 said:
HELP!! someone with vodafone 858 phone could upload their backup or system.img file. plz!! help my phone it stuck on boot screen
Click to expand...
Click to collapse
So, you want to get stock and not keeping cwm or stock but keeping cwm?
---------- Post added at 10:55 PM ---------- Previous post was at 10:20 PM ----------
ardit123 said:
HELP!! someone with vodafone 858 phone could upload their backup or system.img file. plz!! help my phone it stuck on boot screen
Click to expand...
Click to collapse
Actually I asked you a wrong question...Sorry.
So here's the link for my system.img : www[dot]4shared[dot]com/file/6LP2NufA/systemyaffs2.html
You're welcome and please hit the Thanks button if it helped!
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.
10. ROOTED!
Beoxoeb said:
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.
10. ROOTED!
Click to expand...
Click to collapse
Hi, the language is only english? Thanks.
stefanuccio12 said:
Hi, the language is only english? Thanks.
Click to expand...
Click to collapse
I am Spanish but im posting that in English because is the official language on this forum, just use the google translator, anyway if you have any specific question i will answer you ASAP, send me a private message if you wish
If you are asking about the language of the ROM, is in all languages, is an LG official one (E-425)
Beoxoeb said:
I am Spanish but im posting that in English because is the official language on this forum, just use the google translator, anyway if you have any specific question i will answer you ASAP, send me a private message if you wish
If you are asking about the language of the ROM, is in all languages, is an LG official one (E-425)
Click to expand...
Click to collapse
Thanks! I have try then ROM, but the touch button (back and menu) do not illuminate... sin
Anyway Good Job! I have finally rooted my device
Beoxoeb said:
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.::
10. ROOTED!
Click to expand...
Click to collapse
Hello to all visitors of the "XDA": D. Then giving no downloads A link to how you find them and how to follow the instructions you sir? Supposed to say something but was actually not say anything new .Here send links and other stuff sicred my E-mail: [email protected] skype: asan.onbashi[
asan79onbashi said:
Hello to all visitors of the "XDA": D. Then giving no downloads A link to how you find them and how to follow the instructions you sir? Supposed to say something but was actually not say anything new .Here send links and other stuff sicred my E-mail: [email protected] skype: asan.onbashi[
Click to expand...
Click to collapse
The "new" thing is using E-425 ROM instead of E-435 in order to avoid the home, back and menu buttons stop working and the dual sim notification errors, but is not a perfect solution because the back and menu keys backlight LEDs are disabled although they still responding to touch, i found this method by myself, but probably more people found this way as well, and of course, it was not my intention taking credit from theirs, cheers!
This didn't work for me on LG E430
After installing the v10e firmware it kept saying that various processes are stopping
I had to install the official firmware v10d for my phone to work again
I rooted my LG E430 after this link:
http://forum.xda-developers.com/showthread.php?t=2403230
gixy08 said:
After installing the v10e firmware it kept saying that various processes are stopping
I had to install the official firmware v10d for my phone to work again
I rooted my LG E430 after this link:
http://forum.xda-developers.com/showthread.php?t=2403230
Click to expand...
Click to collapse
I never had issues related with stopping processes on my e430, but if you got a proper rooting using this tutorial on the original firmware i will try it, thanks for sharing this method
???
to use framaroot you dont need to use kdz!
kdz is used to flash
and framaroot is used to root
they are 2 different things bro!
AXD96 said:
???
to use framaroot you dont need to use kdz!
kdz is used to flash
and framaroot is used to root
they are 2 different things bro!
Click to expand...
Click to collapse
Framaroot don't work on e430 yet, but is working on e-435 and e-425 (very similar phones), you can flash one of those instead of the original ROM because the phone is compatible, but aparently gixy08 found a post with a better way using other program in order to root on e430 directly :victory:
Beoxoeb said:
Framaroot don't work on e430 yet, but is working on e-435 and e-425 (very similar phones), you can flash one of those instead of the original ROM because the phone is compatible, but aparently gixy08 found a post with a better way using other program in order to root on e430 directly :victory:
Click to expand...
Click to collapse
Hello Beoxoeb
Do you tried this method (link of gixy08)? Can you confirm that it works for E430?
And no problems?
regards Odiad
odiad said:
Hello Beoxoeb
Do you tried this method (link of gixy08)? Can you confirm that it works for E430?
And no problems?
regards Odiad
Click to expand...
Click to collapse
Not yet, im very busy now, but when i have time i will give it a try.
Beoxoeb said:
Not yet, im very busy now, but when i have time i will give it a try.
Click to expand...
Click to collapse
Hello Beoxoeb, please report when you've tried.
Regards Odiad
Hi, it doesn't work for me. If i press power button + volume down, nothing happens and the phone boots normally.
Hi
Beoxoeb said:
The "new" thing is using E-425 ROM instead of E-435 in order to avoid the home, back and menu buttons stop working and the dual sim notification errors, but is not a perfect solution because the back and menu keys backlight LEDs are disabled although they still responding to touch, i found this method by myself, but probably more people found this way as well, and of course, it was not my intention taking credit from theirs, cheers!
Click to expand...
Click to collapse
Thanks but how do ispalnim instructions with downloads A that there is nowhere to write take along with one.Wou direction short measure links (enternet address).If you wish not want you to find a way to direct users to the right of XDA downloads A but obviously you do not want and would rather just something Namik yasno.Publish precise instructions with exact links please not this conundrum where we would suggest a link to thing .Thanks for your attention.
****Greetings!..
I found a way to root my LG e430 that doesn't requires flashing the ROM or Command Promt.The only ''problem'' is that has the chinise SuperUser but you only have to press the Right button in order to give you the permission...here is the method.
http://forum.xda-developers.com/showthread.php?t=2403230
Enjoy!
Sent from my rooted LG Optimus L3 II
nice
Beoxoeb said:
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.
10. ROOTED!
Click to expand...
Click to collapse
Just made an acount to say thanks...works like a charm...I tryed all tutorials, even with the chinese root...no result, It didnțt detect my phone.
+ back and menu button work
Hello @Beoxoeb,
I wanted to ask you If with this root method you can move apps to the phones SD Card or at least uninstall system apps such as Google Chrome.Is that possible?
Sent from my LG Optimus L3 II
A little help..
I've managed to root my LG E430 with this tutorial, thanks for that , but I have a problem with my 'back and options' buttons, their light is gone... The 'home' button also, although it shows a signs of life sometimes (with some apps and sometimes on notifications).
So my questions are:
1. Is there a way to 'add' this settings to the system (cause my guess is they were deleted/misplaced from the system)?
- via android SDK on PC, file manager, or something else (just guessing )
2. Is there a KDZ file for the e430, the original one ?
- used for unroot or fetch the settings for the original one
---
Thanks again for the tutorial and thanks in advance for my questions,
dnisko
Help
beoxoeb said:
hello guys! I finally found the way to root this terminal without losing any functionality (home, menu, back buttons and led notifications working).
Steps:
1. Set your device on download mode (shutdown the phone, then press "on + volume down") and connect via usb on your pc
2. Download this file: M eg a.co . N z /#!agxrtzda!z0ni-g5eg9d-x9yewvckcfn8hpywvbex6ycop5mtqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install msxml 4.0 sp3 parser (msxml.msi)
4. Run kdz_fw_upd.exe
5. Set "type" on "3gqtc" and "ponemode" on "diag"
6. Select v10e_00.kdz from the folder that you downloaded
7. Click on "launch software update" and wait a few minutes
8. After it finished, put framaroot-1.6.0.apk on your sdcard or internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute framaroot, use gandaf exploit.
10. Rooted!
Click to expand...
Click to collapse
when i press launch it says phone not found it doesent even show on the my computer folder helllllllllllllllp :'(
vcREG is a registry editor for lumia windows phones that has SYSTEM level access to the registry. the tool also has the ability to unlock all app capabilities for third party apps(interop unlock), and give SYSTEM level access to most of the filesystem through MTP.
new in version 1.7: thanks to @gus33000 for pointing out some registry values set for the interop unlock that may cause versions of rs1+ to break compatibility with WP8 apps. this has been fixed. For interop unlock, i suggest you use @gus33000 Interop Tools as his tool is more likely to have better support for changes in the future, as i am too bogged down with other projects.
thanks to @Wack0Distractor for sharing the idea and the acer service that makes this unlock for the X50 series phones possible. also thanks to @ngame for providing the test devices and the many hours of debugging, and @djamol for the main reason any of these unlocks are possible.
Instructions for X50 series phones like the 550,950/XL
ndtk_acer_services.zip uploaded below contains acer.service.acersystemservice.spkg, NdtkSvc.dll, and newndtksvc.dll.
1.Go to settings and turn on developer mode.
2a. For APPX version, download vcregUWP_1.7+dependencies.zip,unzip, install dependencies, then install the vcreg appx
2b. For XAP version, Sideload vcREG_1_7.xap using
WP8 xap deployer
C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.0\Tools\XAP Deployment\Xapdeploy.exe
or
WP Power Tools
https://wptools.codeplex.com/
3.Go to the app bar, then choose x50 series unlock. You will receive an error about the acer service not running. That's ok for now. Click step 1 and it will tell you to install the acer system service and copy some files. To install the acer system service, use iutool [rs and newer builds,this version is essential,old versions will probably not work] (can be found here. thanks @Wack0Distractor ).
run this command as administrator
iutool -v -p "path to the file acer.service.acersystemservice.spkg"
if you receive error 0x80070490, disconnect your phone from usb, go to control panel on your pc, devices and printers, find your windows phone and remove device. reconnect the usb to your phone,and after it reinstalls the drivers automatically, run iutool command above again.
if you receive error 0x8024a110, your phone should reboot to the gears UI in a minute. if not, run the command again. if it still doesnt auto reboot, manually reboot your phone. It should reboot into the gears UI, then back into the OS. if it still fails and doest show gears, give you phone a rest for 5-10 minutes and retry(usually needed after a new rom flash).
4.When you're back in the phone OS, copy newndtksvc.dll and ndtksvc.dll to your documents folder on your phone through USB
5.Go to the app bar, then choose x50 series unlock. You should no longer receive the error about the acer service. Now click step 2 and follow the rest of the instructions from the app.
6.If you've taken the silent extras/advanced+info update, or updated that app manually, be sure to choose the option "Restore NDTK 950/XL" in the "x50 series unlock" page and reboot to regain access to the elevated features. It basically means if it suddenly stops working, apply this setting.
Instructions for older devices
1.Go to settings and turn on developer mode.
2a. For APPX version, download vcregUWP_1.7+dependencies.zip,unzip, install dependencies, then install the vcreg appx
2b. For XAP version, Sideload vcREG_1_7.xap using
WP8 xap deployer
C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.0\Tools\XAP Deployment\Xapdeploy.exe
or
WP Power Tools
https://wptools.codeplex.com/
3.Go to the app bar, then choose classic unlock
3.If you've taken the silent extras+info update, or updated that app manually, be sure to choose the option "Restore NDTK" in the "classic unlock" page and reboot to regain access to the elevated features. It basically means if it suddenly stops working, apply this setting.
@vcfan thanks for mention
Not bad to add this that Our New hack for X50 series tested on both RS1 and TH2 (10586.107 to 14393.67) and these OS Versions are tested and supported Thanks for you and @djamol's hard work and other guys who helped in this hack .
Also here is a video that show you I added work with gloves on my 950XL to my phone and it work and etc.
http://www.aparat.com/v/HoCbk
Sorry for my bad English
Guys Do not TRY Full FILESYSTEM ACCESS ON X50 Series .
If you want to Change your X50/XL device font please try this app :
http://forum.xda-developers.com/showpost.php?p=68465197&postcount=46
Universal Interop Unlock is Coming :
http://forum.xda-developers.com/showpost.php?p=68467581&postcount=56
Wow, wow, wow! Great news! Thank you guys, @vcfan and @djamol, and @ngame and all guys who worked on this hack! xda rulez!
Awesome job! Any chance we can get some documentation on the methods?
G.moe said:
Awesome job! Any chance we can get some documentation on the methods?
Click to expand...
Click to collapse
@G.moe, what kind of documentation are you looking for? Have you tried to press large gray buttons saying "CLICK TO SHOW CONTENT" at @vcfan post? :laugh:
Or you are looking for the source code and hack method concept? Use reflector or any other .net disasms to get the app's sources
Thanks works fine.
I have trying MTP and now 950 XL charging only on PC.
Someone have original values in registry?
titi66200 said:
Thanks works fine.
I have trying MTP and now 950 XL charging only on PC.
Someone have original values in registry?
Click to expand...
Click to collapse
Guys in the video I recorded I tell do not try mtp hack it won't work also sftp doesn't work at least for me. If we can handle it at last we let you know.
Only concentrate on Interop and capability unlock and public registry hacks.
Also you can add work with gloves and double tap to your devices .
We are still working on many things to handle
i still try to get "gears" :crying:
tried few times...
dxdy said:
i still try to get "gears" :crying:
tried few times...
Click to expand...
Click to collapse
After Hard reset, Same for me
titi66200 said:
After Hard reset, Same for me
Click to expand...
Click to collapse
my 950XL have 14393.67 and also make HR two weeks ago...
SUPER GREAT !!!! WORKS LIKE A CHARM !!!
Many many many thanks..
works on Microsoft Lumia 950XL - RM-1085 -059X4X5
only MTP / full filesystem does not work but as i understand they are busy with it
vcfan said:
vcREG is a registry editor for lumia windows phones that has SYSTEM level access to the registry. the tool also has the ability to unlock all app capabilities for third party apps(interop unlock), and give SYSTEM level access to most of the filesystem through MTP.
thanks to @Wack0Distractor for sharing the idea and the acer service that makes this unlock for the X50 series phones possible. also thanks to @ngame for providing the test devices and the many hours of debugging, and @djamol for the main reason any of these unlocks are possible.
Instructions for X50 series phones like the 550,950/XL
1.Go to settings and turn on developer mode.
2.Sideload vcREG_1_6_W10.xap using
WP8 xap deployer
C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.0\Tools\XAP Deployment\Xapdeploy.exe
or
WP Power Tools
https://wptools.codeplex.com/
3.Go to the app bar, then choose x50 series unlock. You will receive an error about the acer service not running. That's ok for now. Click step 1 and it will tell you to install the acer system service and copy some files. To install the acer system service, use iutool (can be found here. thanks @souma_rox).
run this command as administrator
iutool -v -p "path to the file acer.service.acersystemservice.spkg"
if you receive error 0x80070490, disconnect your phone from usb, go to control panel on your pc, devices and printers, find your windows phone and remove device. reconnect the usb to your phone,and after it reinstalls the drivers automatically, run iutool command above again.
if you receive error 0x8024a110, thats ok. your phone should reboot to the gears UI in a minute. if not, run the command again. if it still doesnt auto reboot, manually reboot your phone. It should reboot into the gears UI, then back into the OS. if it still fails, give you phone a rest for 5-10 minutes and retry(usually needed after a new rom flash).
4.When you're back in the phone OS, copy newndtksvc.dll and ndtksvc.dll to your documents folder on your phone through USB
5.Go to the app bar, then choose x50 series unlock. You should no longer receive the error about the acer service. Now click step 2 and follow the rest of the instructions from the app.
6.If you've taken the silent extras/advanced+info update, or updated that app manually, be sure to choose the option "Restore NDTK 950/XL" in the "x50 series unlock" page and reboot to regain access to the elevated features. It basically means if it suddenly stops working, apply this setting.
Instructions for older devices
1.Go to settings and turn on developer mode.
2.Sideload vcREG_1_6_W10.xap using
WP8 xap deployer
C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.0\Tools\XAP Deployment\Xapdeploy.exe
or
WP Power Tools
https://wptools.codeplex.com/
3.Go to the app bar, then choose classic unlock
3.If you've taken the silent extras+info update, or updated that app manually, be sure to choose the option "Restore NDTK" in the "classic unlock" page and reboot to regain access to the elevated features. It basically means if it suddenly stops working, apply this setting.
Click to expand...
Click to collapse
dxdy said:
i still try to get "gears" :crying:
tried few times...
Click to expand...
Click to collapse
Double check this registry value using CustomPFD
HKLM\System\Platform\DeviceTargetingInfo
PhoneManufacturer
It must be in type (String) and it's value should be ACERINC to be able to deploy acer spkg.
If it's not you didn't do Step1 of VCreg correctly .
OK.
If you get 0x8024a110, you're probably on 14393 / anniversary update / Redstone1/whatever.
If so, you NEED to use iutool from the 14393 WDK. No ifs, no buts. Use that or you WILL get that error.
Here's a download of just the WP-tools (iutool, getdulogs, ffu creation etc etc) direct from MS: https://download.microsoft.com/down...5524A95/wdk/Installers/WP_CPTT_NT-x86-fre.msi
Mirrored it here just in case.
Works again for me.
I am stupid because "acer.service.acersystemservice.spkg" still installed after H.R.
titi66200 said:
Works again for me.
I am stupid because "acer.service.acersystemservice.spkg" still installed after H.R.
Click to expand...
Click to collapse
OH Yes guys . Good to say
After Hard reset you do not need to do many reboots because our ndtksvc is place in system32 (it didn't gone)
So you only need to go to x50 series page and check Live interop/cap unlock and apply it . that's it .
ngame said:
Double check this registry value using CustomPFD
HKLM\System\Platform\DeviceTargetingInfo
PhoneManufacturer
It must be in type (String) and it's value should be ACERINC to be able to deploy acer spkg.
If it's not you didn't do Step1 of VCreg correctly .
Click to expand...
Click to collapse
yes, ACERINC is there but still no luck...
---------- Post added at 02:11 PM ---------- Previous post was at 02:03 PM ----------
Wack0Distractor said:
OK.
If you get 0x8024a110, you're probably on 14393 / anniversary update / Redstone1/whatever.
If so, you NEED to use iutool from the 14393 WDK. No ifs, no buts. Use that or you WILL get that error.
Here's a download of just the WP-tools (iutool, getdulogs, ffu creation etc etc) direct from MS: https://download.microsoft.com/down...5524A95/wdk/Installers/WP_CPTT_NT-x86-fre.msi
Mirrored it here just in case.
Click to expand...
Click to collapse
installed and run iutool and now get gears!!!! thanks!!!
p.s.
interop is applied but.. still no use of AppDataManageTool or Adblock tool???
Great work!
Random question, probably a dumb one, but does this work on the M8FW? Or is it dependent on a x50 device exploit? Cause maybe I'm reading this wrong but it seems kinda universal
Thanks A lot!!!!
@dxdy
"Adblock tool" use "Nokia.SilentInstaller.Runtime" who seems not working on x50.
AlvinPhilemon said:
Great work!
Random question, probably a dumb one, but does this work on the M8FW? Or is it dependent on a x50 device exploit? Cause maybe I'm reading this wrong but it seems kinda universal
Click to expand...
Click to collapse
It's not intended for non-Microsoft/Nokia devices. NdtkSvc.dll is Nokia/Microsoft specific.....
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
How to get avtivation code 4 huawei media pad gr8
Ameer latif said:
How to get avtivation code 4 huawei media pad gr8
Click to expand...
Click to collapse
Hi, found a reply in a facebook post with the bypass code shared by Mohd Ridzwan.
But due to restriction of my account, i hit below msg while having url in the reply.
The following errors occurred with your submission:
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Click to expand...
Click to collapse
Please google: Gr8 powered by Malay Mail "Lim KY" "Mohd Ridzwan"
And look for the reply in the post by Lim KY, February 22, 2016 · Kuala Lumpur.
methods can check out my blog:
HUAWEI S7-701U Gr8 ACTIVATION CODE BYPASS OR FIRMWARE 100%
METHOD 1: To perform hard reset for your Huawei S7-701u you may need to save all of your apps and files to your memory card and take it out...
dreamyskyblue.blogspot.com
traviskb said:
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
Click to expand...
Click to collapse
B
traviskb said:
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
Click to expand...
Click to collapse
Bt how I install app remover were as the phone is unaccesable,
billson.chew.my said:
Hi, found a reply in a facebook post with the bypass code shared by Mohd Ridzwan.
But due to restriction of my account, i hit below msg while having url in the reply.
Please google: Gr8 powered by Malay Mail "Lim KY" "Mohd Ridzwan"
And look for the reply in the post by Lim KY, February 22, 2016 · Kuala Lumpur.
Click to expand...
Click to collapse
How can I by pass, i have the code the problem is the WiFi, Wereas it is connected,
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
EUI Version
CHINA with Play Store and Play Services - EUI 6.5
US (Android Aosp) - EUI 5.8.057S
Awesome! performing the upgrade to 6.5 today!
OK, I've got it installed EUI 6.5 rooted, but I can't seem to get Gapps installed for the life of me. using the script calls ADB, but I can't figure out how to enable debugging in my TV to allow that.. The new UI is just too different to locate what I need to do.
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
[Recovery] LeTV Super4 (4th generation) :: All Mstar 6a938 based models supported
I want to leeco tv android oreo custom rom
I want to any custom oreo rom for leeco tv it is possible or not.
telegram group for LeEco
Souviktechguy said:
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
routerhacker said:
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
I have the LeEco 43 in bedroom....so frustrated, it is connected to the internet. I have cut the cable and using apps. Every time I turn the tv off...and then turn on later it will not upload the apps....I unplug the tv for a minute...then turn on and the apps load. I am not that tech savvy and would appreciate any help you might offer
Stuck
Darksurf said:
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
Click to expand...
Click to collapse
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
the Doctor said:
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
Click to expand...
Click to collapse
How do i post links for other firmware.. Xda is not allowing me to post firmware link as well!
Toni247C said:
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
Click to expand...
Click to collapse
Clear showtime app and force stop... It will resolve your problem
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Search TECHNITURE channel on youtube for more help..
You don't have to unplug the tv, hold the power button down for like 4 seconds to fully power the tv down, that works for me.
我是香港用戶。我成功刷了美國5.8 Rom，但無法搜索香港電視信號。如何將ATAC轉換為DTMB？
Hi my name is lawal am using leeco tv can some help me with new update please
Please some one should help me with new update for leeco tv please thank you all