Related
My wife recently got a Sprint Touch Pro, and considering the flashing junkie that I am (and how much I hate stock roms), the first thing I did was to jump in here to see what could be done about it. Much to my surprise, it seems that XDA-Devs has very little information regarding the HTC Herman variants (Sprint, Verizon, Alltel, etc.) since most of the development for the Raphael is being done for the GSM version only. There are a few scattered threads about this but I figured that a sticky (and a Wiki update) will not hurt the site and as an added bonus, it will help the noobs (and some Seniors too ).
I found most of this information in ppcgeeks.com, so feel free to lurk around that forum as well since it is packed with useful information.
Instructions are the same as with the GSM models, only inverted. In other words, [highlight]IF YOU FLASH THIS ON A NON-CDMA PHONE, YOU WILL BRICK IT. NO QUESTIONS ASKED.[/highlight]
I am not responsible if you brick, damage, or affect the functionality of your phone in any way, shape, or form. Do this under your own discretion...
And as usual, when in doubt...READ!!!!
Edit: You will need a software to unzip the files (Winzip, Winrar, 7-zip, etc). It has been reported that the Vista file decompressor (or something like that) will associate this package with Adobe reader, making it difficult to open it...
Edit 2: If you are flashing for MetroPCS, please follow this amazing guide that dreynam2 has put together!!!
Here goes:
Step 1: HardSPL Unlocking!
Again, all this information can be found in www.ppcgeeks.com (original thread here). I just wanted to make it available to people at this site. Thanks to cmonex and the full CDMA Raphael Elite Team!
UPDATE: VZW SPL posted. (there will be an all-in-one unlocker later, but until then please read the instructions and decide which file is for your device.)
CDMA Raphael Elite Team (see: http://forum.ppcgeeks.com/showthread.php?t=41345) presents exclusive Touch Pro CDMA Hard-SPL to you!
SSPL, HSPL, relocker made by cmonex, Wrappers by olinex, SD flasher and relocker (coming soon) by no2chem. thanks to NexVision (btw I'm really sorry), zule/Shadowmite and no2chem for testing!!!
there are three HSPL's now (for the non-verizon ones it is a similar scene to Diamond_C).
1. 0.25.MFG for Sprint/Alltel/Telus/Bell, for hackers only, because otherwise, it is too old, apparently has splashscreen issues and only 128MB ram. but it has mw, it has rtask, etc. etc.
2. 0.37 for Sprint/Alltel/Telus/Bell, for other people, this has no screen issues but no MFG commands.
3. 0.35 for Verizon touch pro's ONLY.
Important:
first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS/BELL), this will brick your device.
to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com.
but if you have CDMA Touch Pro/Raphael, then you have to use this hardspl, not the one at xda-developers!!!
preparations before flash:
1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
3) now decide which Hard-SPL you want to flash. if you have Verizon, flash VZW package (from verizon attachment). if you have Sprint, Telus or Alltel or Bell, flash default package (Raphael_CDMA_HSPL_037.zip).
instructions:
1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run HardSPL exe that you downloaded before.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 0.25.C-SSPL or for Verizon devices it should say 0.35-C-SSPL.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.35.CMONEX or 0.37.CMONEX (or 0.25.CMONEX MFG).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
make sure to get SSPL-Manual specifically for Verizon phones from the verizon package.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.
NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. Default relocker is for Sprint etc, Raphael_CDMA_VZW_Relocker in the verizon package is for Verizon touch pro's.
[highlight]EDIT: I tried on multiple occasions to upload the Verizon unlocker to this thread, but the system keeps on refusing it again and again (main reason why I had a link to the original site). Go to the PPCGeeks site and get the unlocker from there (alternatively, this was provide by psouza. Thanks!)[/highlight]
Step 2: Choosing the ROM that Fits Your Style
Congratulations! If you are reading Step 2, that means that you successfully unlocked your phone (or are about to make a no-no). Make sure that your phone is HardSPL unlocked or else you will not be able to flash.
Taste is a matter of personal choice. As I stated in my previous post, most of the development for this phone is being done at PPCGeeks, and since posting every Rom thread in here would be time consuming (and possibly useless), I am giving you this link to all the custom ROMS.
Which one is best you ask? Again, a matter of personal choice. Some roms are feature packed, whereas others are light and fast. Really up to you...
Link to Roms
Step 3: Flashing Your New ROM!
Well, Step 3, that means that you chose a ROM and are ready to get down and dirty with your device (and about to kiss that ugly stock rom good bye). As with the flashing of any device, make sure that:
a. Your device has battery of 50% or more, else you might end up with a half flashed brick.
b. You have ActiveSync/Device Central in your PC.
c. That you read the steps below over and over and over again until you can repeat them in your sleep.
[highlight]Make sure to follow every single step down to the T. I cannot stress this enough.[/highlight]
How to Flash Via PC:
1.download the ruu.zip attachment
2.unzip to your desktop
3.then in the newly created RUU directory add the rom of your choice - (copy the RUU_Signed.nbh to desktop\RUU)
4.Place phone in bootloader mode (power button while holding volume down button)
5.open the ROMUpdateUtility.exe
6.follow the RUU on screen instructions from there
If that fails please trying these directions (thanks sn0b0ard)
1. Establish active sync connection (this is the most important step).
2. Copy the RUU_signed.nbh into the RUU folder.
3. Run ROMUpdateUtility.exe and follow the steps on screen to flash ROM.
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
5. Perform a hard reset (hold power, volume down, and center d-pad).
6. Complete the Windows Mobile setup and start using your new ROM!
Flash from microSD Card (Thanks to MadlyAlive):
1. Make sure you backup anything that is necessary to your day to day operations! At a minimum, please perform an ActiveSync to Outlook or your Exchange server prior to flashing!
2. Rename the custom ROM NBH file from RUU_Signed.nbh to RAPHIMG.nbh
3. Copy RAPHIMG.nbh to the root of your microSD Card.
4. Hold the Volume Down and Power button simultaneously. While you're still holding those 2 buttons, press the reset button with your stylus.
5. When your Touch Pro tells you to do so, press the power button to begin the flash process. If you do not get the message to press the power button to flash, there is a mistake in the name of the NBH file or you do not have the file at the root of your microSD card.
6. When flashing is complete, perform a soft reset.
Step 4: Tweaks, Tweaks, and Tweaks!! (Part 1)
Step 4!!! Wow, you must feel in cloud 9 right now! You successfully got rid of that stock rom (without making a $700 paperweight) and are ready to tweak your device to your own liking! Here are some tips and tweaks that I found over at PPCGeek (Original thread) Thanks Baffles!!
Note:Go to the original thread for all the cabs.
Tweaks and Fixes:
Basic:
If your device is showing you random issues, such as speaker/ear piece being crappy out of the box, do a hard reset. Some have reported this simple task has solved their problems. You can do this one of two ways: either select clear storage from the system tab in settings (Start->Settings), or power off the device, hold volume down and OK, and hit the power button.
If your data isn't working, try this.
Disable SMS Sent Notification: [HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settin gs] Set SMSNoSentMsg to 1
Install the Picture Mail enhancement from Sprint - run PIE, and click "Click here to check for new updates." (if you changed your homepage, go to Sprint PowerDeck from favorites) Then download and install the cab file listed. This will have to be done after every hard reset. Still seems picmail doesn't like to work right, though.
Phone:
Install new Audiopara for louder volume
Enable/Disable mute call when phone is flipped over - [HKEY_LOCAL_MACHINE\Software\HTC\PHONE] Set FaceDownMuteRing=1 to enable, or =0 to disable. Source
You can make your phone stop making noise when you enable/disable the radio. Edit [HKEY_CURRENT_USER\ControlPanel\PhoneExtendFunction \CDMA\FlightModeOnOff] and change Sound_on and Sound_off to desired sound, or blank for no sound. source.
Issues with answering your phone when a data connection is open (answer buttons don't do anything)? Looks like a tweak messes up a registry key that affects this. [HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings], make sure SuspendResume is set to #777 (not anything containing GPRS). This issue seems to be related to Advanced Config. source
Added 1/7/09:
Enable wake up on SMS - you can do this via DiamondTweak (possibly advanced config too), or [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] DisableSMSWakeUpEvent=0 (to enable waking up). source
Set up Visual Voicemail on Sprint. More info here. THIS IS VERY YMMV.
Internet:
This hack no longer needed on the latest version of WMWifiRouter - Disable temperature sensing in WMWifiRouter to get it to allow you to connect. Options->Configuration->Battery->Next->Next->Next->Select "Disable temperature detection"->Next. There is a bug, at least in my version, that shows "Enable temperature detection twice" however selecting the second one disables it.
Hack Internet Sharing to work: [HKEY_LOCAL_MACHINE\Comm\InternetSharing] Delete Extension key, set/create MaxCMCon=0 (decimal). [HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings] Set ForceCellConnection="Sprint" -- Cabified Version Here
Change "Reply All" in poutlook back to "Reply" - [HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement], set module to an empty string. TO revert, set module to "\\windows\\OutlookEnhancement.dll"
Information here on GeoTagging/Automatic uploading of photos using Shozu.
Change useragent in Opera Mobile to view full websites instead of mobile versions. Info here.
If you have issues with Gmail/IMAP and sending emails, Official fix here, or read this post
Make Pocket IE your default browser. How to here.
Skyfire now "works" on Touch Pro. It is not a real VGA version, just QVGA stretched up, so however crappy it may look it is the best flash solution for now.
New Opera Mobile from Touch HD here - May or may not perform better, some reports of issues/graphical glitches/etc.
Increase the maximum number of tabs in Opera - Close Opera and edit \Windows\Opera9\opera.ini and change the Max Allowed Tabs to the right number. thanks mclaser
Added 1/7/09:
Set Opera to be your default browser for all items. source
TouchFlo 3D / Manilla 3D
Add your city to the weather tab. Follow these directions making sure to use the modified copy of version 1.1 of the specified editor.
A better way - Install the cab from here and it will add all cities to the list for you, so you can just hit Add Location and find yours! Updated 1/8/09
Install flip clock if you want it. instructions here
Get some wallpapers
Wallpaper on every tab, transparent clocks and curtains. More info here
Optimize your music tab by removing the music store logo. Some Touch Pro specific directions.
Information on how to remove sprint Manila3D customizations and get an HTC Stock configuration here
Rename your tabs in Manilla3D. Tutorial and instructions here.
Remap Manilla3D to use Pocket Informant instead of the built in calendar. Complete information here
Increase TouchFlo's sensitivity, so you don't have to push as hard to scroll. [HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings] increase FingerPressure. Default is 16. I am having good luck on 128, I may raise it higher. Higher = more sensitive, lower = less sensitive.
Touch Pro Cleanup by GoodThings2Life - read this/download one of the cabs to automatically apply a specific set of tweaks/mods.
Action screen changes, customizable through registry edits. More here
Change the soft keys on the home screen. [HKEY_LOCAL_MACHINE\Software\HTC\Manila], change HomeLSKPath and HomeRSKPath. HomeLSKText/HomeRSKText = the text. More info here.
Added 1/7/09:
Change software used by some TF3D entries with SSMaPa - This can be a complicated procedure. source
Boost TF3D Performance - increase file system cache to 8MB, file system filter cache to 131072, FAT cachesize to 32768 (you can do this with advanced config). source
Discussion about scrolling/tweaking of scrolling here
Revive the tab change animations! info, and source
Other Theming Topics
Custom Start Icon/Battery/Speaker/EV/1X Icons - UPDATED 1/7/09
Step 4: Tweaks, Tweaks, and Tweaks (part 2)
Other
Get S2U2 to work: Make sure you install the VGA version, not the QVGA version. You can now use DirectDraw mode with the newer versions of S2U2. UPDATED 1/7/09
Get your battery icon with percentages here (old thread).
Battery/performance hacks if you're so inclined.
Turn it into your most expensive flashlight - Alternate program. Both work, nueLight v3.0 is what I personally use. UPDATED 1/7/09
Auto screen rotation with Gyrator 2, and Configure it to not rotate certain apps UPDATED 1/7/09
Fit more icons into your programs list with this tweak
If your text is too big, such as in text messaging, go to Start->Settings->System->Screen->Text Size and move the slider to the size of text you want. Alternatively, you can move your thumb in a circle around the OK button, similar to how you would use the click wheel on an ipod. This will adjust the font size too.
You can disable auto-wakeup when keyboard is opened.[HKEY_LOCAL_MACHINE\Hardware\DeviceMap\Keybd] Create new dword "SlideWakeup" with value of 0 and soft reset. To revert, delete the key or set it's data to 1. Source
Get Old School word correction back (same as was on Mogul, etc) - Latest Cab here - Older Information:Updated information here and here.
Disable start-up sound / change it - [HKEY_LOCAL_MACHINE\Software\HTC\HTCAnimation] Rename both 'StartupGif' and 'StartupWav' to new values, or leave blank to disable. Source
Increase your screen's sensitivity. [HKEY_LOCAL_MACHINE\Drivers\TouchPanel] change PressureThreshold. Default is 37 Decimal, it is reported 240 decimal is a good new value for this. source
Added 1/7/09:
More Camera Modes! You can enable these in Diamond Tweak, there are options to enable Burst/Sport mode, videoshare mode, and increase resolution of sport/burst photos. source
Remove scrollbars: [HKEY_LOCAL_MACHINE\System\GWE] change cyHScr to 0 to disable horizontal, and cxVScr to 0 to disable vertical bars. source
Enable sound effects for keyboard open/close, info here. source
PST Tweaks:
First thing you must do is get your MSL. I wrote an app to make this very easy for you, more info on it here. If you have problems getting your MSL, put your phone in flight mode and try again.
You can tweak your Slot Cycle Index (SCI) to make your phone poll the tower more often. This makes your texts and phone calls come through quicker. This setting is a trade off between lag (most noticeable when receiving calls) and battery life. The default value on our phones is 2. Every step of 1 adds 1.28 seconds to the poll time, so at a value of 2 it is only polling every 5 seconds or so. Most people lower this to 1, so the phone polls every 2.5 seconds. This won't affect battery life much in areas of good coverage, but may impact it noticeably if you're in a poor reception area. Your Access Overload Class (ACCOLC) determines your phone's priority on the cell tower. The higher the number, the lower the priority. Do note that 0 and 1 are reserved for emergency service uses, so DO NOT use these. You can ACCOLC's of 2-9, default on Sprint should be the last digit of your phone number.
Now that I've laid down the basic groundwork of the two main mods, here's how to change them. Don't mess with settings in here unless you know exactly what you're doing, as phone performance and usability will be affected. To enter programming mode, open your phone screen and dial ##778# (may be ##778 on some devices, if that doesn't work, run EPST.exe from \Windows). Click edit, type in your MSL, and hit OK. Now choose View Info in the lower left corner, and hit NAM settings. On this page you can change your ACCOLC (remember, don't use 0 or 1). Now, switch to the Modem Settings page to change your SCI (default is 2, valid values are 0-7). Now accept the changes and soft reset, and you're updated!
More information can be found here
Useful Downloads:
DiamondTweak - some tweak options do not work.
Advanced Config - claims to be fully compatible UPDATED 1/7/09
Total Commander
PHM Regedit
TF3D Config [not fully compatible with TP yet] - more info here
i-nigma - read QR codes. Any Windows Mobile apps I release from now on will also have a QR code for quick and easy OTA installation.
BAF MSL Grabber - Get your MSL quickly and painlessly.
List As Editor - My little utility for editing the 'List As' property of a contact manually.
Touch Pro Cleanup by GoodThings2Life - Clean up the stock ROM easily
PocketToolman 2 - includes features such as disabling scripts in PIE and other OS tweaks/tools.
esmertec Java JBed - set up for 3D and VGA. More info here.
Radio Utilitues - scripts by GoodThings2Life to give you shortcuts to turn on/off BT and Wifi.
POP/IMAP Send Mail patch - Microsoft issued patch that fixes issues with sending mail.
SecondToday - gives you a second today screen to allow you to use other today screen items in tandem with TouchFlo 3D.
.NET 3.5 - also, if you need them, debugging messages for .NET 3.5.
[color]Added 1/7/09:[/color]
Some popularly requested cabs
Another list of useful apps
Large collection of apps - all indexed and in one bundle.
Custom ROMs and Tools, Low Level Stuff:
Hard-SPL thanks to Raphael Elite Team
HTC Debug Tools
Touch Pro Cleanup by GoodThings2Life
How to remap hardware buttons
Stock Roms for CDMA
ElectronicRice's kitchen
And of course, your custom ROMs can be found in the upgrade sub-forums. CDMA Upgrades and GSM Upgrades
Added 1/7/09:
ATI D3D Drivers - The jury is still out on if these really do anything. Some discussion here. source
Omnia D3D Drivers - See info on ATI drivers above.
Flashing Instructions
WM6.1 20931 Kitchen, CDMA, GSM
New Radios! CDMA and GSM.
SRS WOW Audio Drivers - Jury is out on this one too.
Hardware:
Video Cables:
Buy from Expansys
Build using pzztgotbagz method
PPCGeeks Alternate Method
XDA Method
Other:
Discussion of accessories/sites to purchase accessories.
Fix your noisy battery cover if yours makes noise. - here .... mirror here
Discussion and Indexing of Touch Pro build dates and issues. Another thread here
Discussion on battery charging and heat issues.
Added 1/7/09:
Dye your battery cover!
Step 5: The "OH SH*T!!" Step. Stock Roms
Well, if you are in Step 5, that means that you have to go back to Stock rom for whatever reason. Worry not, the roms are readily available. Just go to
http://forum.ppcgeeks.com/showthread.php?t=42741
Here you will find all your Stocks for most carriers.
If you have to Relock the phone for warranty purposes, just use the relocker in the first post. Now, there is a trick to use this thing. If you want to relock and just run the exe with the phone connected, you will get an error.
[highlight]Flash back to original Shipped Rom and Radio BEFORE Relocking!!!!![/highlight]
*First, put the device in bootloader mode (Hold Vol Down +Power +Reset until you see the bootloader screen (multicolored). It will say Security Unlocked and a bunch of other numbers including (and this is key) 0.37 Olinex (or Monx, I can't remember right now)
*Now, run the exe in your computer. This process takes about 1-2 minutes at the most. The phone will reset after its done.
*To check if it worked, wait until it finishes rebooting and go to bootloader once more. If done correctly, it will still say "Security Unlocked" but it will say 0.37.0000 instead of what I wrote earlier in this post. You should be goof to go from this point on.
Stuck. Thank you for collecting all of this information!
You are awesome, I have helped alot of new people who have flashed GSM ROM's to their CDMA devices and this will help out alot! Even though I have a GSM Fuze, please let me know if I can help you with this in any way. It has been discouraging to see how the new people who have mistakenly flashed the wrong ROM to their phones have been treated and I know alot about phones GSM and CDMA and am also a member of PPC Geeks and have been for some time (not much posting mostly reading) my name there is dashmaster1000. So if you would like some help or just want me to gather and compile information I am more than willing to help you! Again thank you!
Cal-El said:
You are awesome, I have helped alot of new people who have flashed GSM ROM's to their CDMA devices and this will help out alot! Even though I have a GSM Fuze, please let me know if I can help you with this in any way. It has been discouraging to see how the new people who have mistakenly flashed the wrong ROM to their phones have been treated and I know alot about phones GSM and CDMA and am also a member of PPC Geeks and have been for some time (not much posting mostly reading) my name there is dashmaster1000. So if you would like some help or just want me to gather and compile information I am more than willing to help you! Again thank you!
Click to expand...
Click to collapse
Thanks man! I have seen how you've helped people out (especially in the NRGZ roms since I am around there for the most part). I have asked NATF to cross post this sticky in the Raphael Rom Development as well, to prevent "accidents" from happening. In either case, if you do find some useful stuff that is not here, feel free to either pm me (I will update the posts) or simply add it to the thread yourself, whatever you prefer.
Once again, thanks for the praise
i need help. when i flash with the micro sd, all it does is take me to the tri-color screen that says "security unlocked" at the top
poisondminds said:
i need help. when i flash with the micro sd, all it does is take me to the tri-color screen that says "security unlocked" at the top
Click to expand...
Click to collapse
Is there any particular reason why you cannot flash via USB? I am only asking simply because it is a far easier process.
Just follow the instructions of Step 3 and you should be ok. One thing to mention, [highlight]do not let go of the VolDown and Power Button when you see the bootloader. You have to hold them down since it will go to a white screen with a set of instructions in blue right after that. It is the same process as with a Hard Reset.[/highlight] Make sure that you did the HardSPL prior to flashing a rom. Good luck!
Thanks!
I'm brand new. Just got my Touch Pro a few days ago and have been lurking around a few forums to get myself aquinted with the options available for custom ROMS and proggies. Thanks for this comprehensive guide for all of us newbies!!!!!
kstephens98 said:
I'm brand new. Just got my Touch Pro a few days ago and have been lurking around a few forums to get myself aquinted with the options available for custom ROMS and proggies. Thanks for this comprehensive guide for all of us newbies!!!!!
Click to expand...
Click to collapse
Not a prob. Enjoy!
Flashing Question
This may seem like a strange question but here goes...
I am considering flashing my Touch Pro and wonder if any one has tried doing it in Win XP Pro running under Parallels on a Mac? ActiveSync works fine so I know the communication between the two is fine. I really don't want to drag my old Win 2K machine out and upgrade the RAM and OS just to start playing around with different ROMs... but I don't want a $600 brick either.
Thanks to all in advance!
butchwhitt said:
This may seem like a strange question but here goes...
I am considering flashing my Touch Pro and wonder if any one has tried doing it in Win XP Pro running under Parallels on a Mac? ActiveSync works fine so I know the communication between the two is fine. I really don't want to drag my old Win 2K machine out and upgrade the RAM and OS just to start playing around with different ROMs... but I don't want a $600 brick either.
Thanks to all in advance!
Click to expand...
Click to collapse
It has been tested, and it works great.
On a side note, once you get HardSPL on the phone, I suggest flashing from your SD card directly. Not only does it eliminate the need for ActiveSync, but it is also 2-3 time faster.
total noob
HI every1.. total noob here..I am considering flashing my USCellular TP...
I understand USCC is CDMA? Does it matter which rom i use? Does the rom have to specify USCellular er what ..
im clueless thanks in advance
It should not matter as long as it is a CDMA rom. What makes it carrier specific are certain apps that come with the original. However, you may want to check with the cook, just to be on the safe side. Good luck!
Good ROM for Verizon TP
I have a Verizon Touch Pro and am thinking about flashing. I am curious what is a good rom that is out there. I love the TF3D so I want it included with the ROM. Aside from that I don't really have any preferences (Super fast would be a plus). Thanks for any advice.
xguerox said:
I have a Verizon Touch Pro and am thinking about flashing. I am curious what is a good rom that is out there. I love the TF3D so I want it included with the ROM. Aside from that I don't really have any preferences (Super fast would be a plus). Thanks for any advice.
Click to expand...
Click to collapse
Go to the link that I provided in Step 3 of my guide. Most of the available roms are in there. As far as which one is good, it really is a matter of personal taste. Mighty 4 (WM 6.1) is said to be one of the best and most stable ones out there. I used Fallen 2.1 and that was a pretty good rom. Very fast and relatively clean but with the app that you will want to have at one point or another. Good luck!
OK this is a Guide on how to Flash Xbmod & Yuki’s WP7 ROM (Mango 7720). It is not a replacement of the original thread simply an accompaniment, continue to use other thread to post issues and asks.
PLEASE READ / PLEASE READ / PLEASE READ / PLEASE READ / PLEASE READ /PLEASE READ / PLEASE READ / PLEASE READ / PLEASE READ
This sometimes causes offense- If you ask a question that has been answered here! You will not get an answer on the board–
If I link a thread visit the page and read the instructions and thank the person for taking the time and effort.
History
There are two ROM’s made by XBmod and Yuki (within a few days of releasing the ROM Yuki retired from XDA, may they RIP or be resurrected in the future) XBmod continues to build and offer solutions. But understand that you are indebted to them and others – for providing the ROM.
Concept
To build a WP7 ROM that can be updated by Zune when MS release updates and Also so that Dev’s or anyone can develop custom CAB’s to be sent to the device without the need to reflash or mess with the system…….
The ROM
Both are Unbranded i.e. Vanilla flavor i.e. No carrier branding and you have Root access.
There are two differences between V1 and V2 ROM’s
1. V1 - HD2_Updatable_XBmod_Yuki_v1
a. Radio: 5.69.09.05a_22.50.50.21u
b. was an attempt to try and get he Sdcard working for other things but it failed, V1 remains for future development only
(Feedback from those testing V1 was that the Radio caused extreme battery drainage and the SD card created more issue than good, so V2 was born. V1 is left for others to play and possibly future development, to see if they can eventually get Dual boot to work – but it may never occur and quite frankly this ROM is so Stable & Pure and running on the best device ever, that you don’t need another OS)
2. V2 - HD2_Updatable_XBmod_Yuki_v2_native
a. Radio: 5.51T.09.29a_22.32.50.10U
b. Formats the SD card like a native WP7 device
(Feedback about battery performance has been for most, positive with a few exceptions will attempt to build country table in Appendix)
Common Questions
Q. Which ROM should I use?
A. Use the V2 ROM for obvious reasons.
Note: When you flash you will LOSE ALL DATA from your SD card, so if you need it - back it up! Also some SD cards present issues so be warned not all work…..
Make sure it’s a SD card that works and is supported, otherwise you could face frequent reboots / freezes / restarts / loops. SandDisk seems to be the best so far try to use class 4, you can use, 2GB, 4GB, 8GB, 16GB and even 32GB
Q. Can I Dual boot and Run Android?
A. Yes. XBmod has released a CAB that can be used to unlock the SDCard for Dual boot.
Q. I’ve installed V1 should I move to V2?
A. that’s up to you, but the general consensus is Yes move to V2
Q. I’m on V1 do I need to Start right from the beginning – re-run the whole Process?
A. Update oriignally yes, but we have a report that someone has gone straight from V1 to V2 without going back to stock rom (WM6.5) by simply flashing V2 on top of V1. No reported problems. So, it's up to you...
Q. Do I need to change the HTC HD2 name in about to HD7
A. No the HTC HD2 is just afriendly name, it wont and can't cause any problems anywhere. The phone is registred as an HTC Schubert (HD7)
RADIO:There are two Radios:
The first which you install during the initial set-up and another which is Baked into the ROM. Some folk who want to play and experiment will want to change the Radio in the ROM – you can do this and more about that in the Appendix:
UPDATEL: XBmod is working on a CAB to change the Radio in the ROM, thus in the future you will be able to send the CAB and change the Radio.
What do I need?
HD2 unlocked and a WP7 Activation key (search the forum)
Hard SPL v 2.08 or higher
I used HSPL4 and selected HSPL2.08.
WP7 doesn’t support HSPL3.03/OSPL3.03. You need to select HSPL2.08 to run WP7 & MAGLDR.
Radio which supports 576 RAM. (Radio 2.15.50...)
I used Leo_RADIO_2.15.50.14**:
Magldr1.13
Windows Mobile 6.5 Stock ROM
I used World Wide English (WWE) 3.14.405.2
Zune Download and Install the lastest version of the client.
WP7 Update Cab Sender
Download and extract to a folder on your PC, this will be the tool used to send custom packages (CAB) to the device and offer backup and restore features:
HD2-7720fix
Extract to a Folder
The V2 ROM HD2_Updatable_XBmod_Yuki_v2_native
Extract to a folder
DeviceProvisioning.cab
To be placed into “WP7 Update Cab Sender folder” later. Do not Extract!!
UPDATE: XBmod has released a new SDCARD UNLOCK TOOL. You are now able to Read and Andriod PARTITION and UNLOCK all your locked Cards.
Custom and Special CAB's:
DEV_STORAGELOCK.cab (this will install the unlock tool for your sd card (providing the possibility of dualboot))
DEV_STORAGELOCK_REMOVE.CAB (as always a second CAB removing the above function "unlock tool" Warning your SDCard will be relocked at reboot resulting is dataloss.)
The Install Procedure
Note: should you be familiar with custom ROM's and have following already installed on your device:
A) hard spl
B) magldr 1.3
C) the correct Radio!
D) then proceed directly to Section 7 and follow instructions "restart your phone and get into magldr menu by pressing and holding the red button then follow steps from Section 7. If you do not have the above installled, proceed from the Step 1 . Thanks to bryangopan
Install
1. Install Hard SPL v 2.08 or higher
2. Install Windows Mobile 6.5 stock ROM
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
If you have installed a ROM with Radio 2.15.50.** then you can skip the next Install (3) and move directly to section (4). If you are unsure perform section 3, it wont break antything.
3. Install the Radio 2.15.50.** to the device, it installs through the same method as above
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the ROM Update and follow instructions, your device will be flashed with right Radio
4. Turn on WM6.5, using the format tool in WM6.5 format your SD card.
5. Install Magldr1.13
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the ROM Update and follow instructions, your device will be flashed with right Radio
6. When you’re Device Restarts, on the device screen you will see the Magldr menu, use Volume Up and Down to navigate, Answer Call (to Select)
Move down to last option and power it down.
7. Go to Magldr menu, do this by Holding the Power button on the device while powering the device up again
• Navigate using Vol Down and Up and use the “Accept Call” (green key) to Select feature
• Move down to and select Services
• In Services menu select option 4, uselast24nand.
• You will auto return to main menu
• Move down to and select Services
• In services menu select option 5. clearsd MBR.
• Confirm selection.
• You will auto return to the main menu
• Select option 5 usb flasher.
• The screen changes showing you USB Flasher mode / Wait USB
• Make sure you’ve connected the usb cable to the HD2 and PC
8. download and Extract HD2_Updatable_XBmod_Yuki_v2_native.zip (7004)
• This should be extracted to your PC, in the folder locate DWI.exe
9. As administrator Run DWI.exe follow the instructions and flash the rom.
• Once WP7 has been flashed (7004) it is important that you go set the Time and Date to match the Time and Date on your PC, otherwise Zune will not update. You do Not need to Sign into Windows Live or Activate the device at this point, not until you have flashed 7720 it makes no difference if you activate now you will only need to do it again later.
• Start the Zune and it should Detect your HD2
• In Zune go to settings / Phone and check for updates updates, once Zune finds the update, press ok and update now.
• This will be the (7008) update and your phone will automatically restart show you progress and eventually show successful.
• Once completed Zune will check for another updates and find another update this is the move to (7392). Press Update Now and once successfully completed you will be on 7392 this is NODO.
10. Optional.
• If you want to wait for the official release of MANGO through Zune then start using your WP7 by activating it etc and stop here.
• If you can’t wait and want more then continue……
11. HD2-7720fix.rar
Extract to a Folder
Within there are two sub folders
MangoRTM
update tool
Open the "update tool" folder and run either x64 or x86 to install the program according to the version of Windows you have. You will see it run once and exit.
Exit Zune make sure it’s not running.
12. WP7 Update Cab Sender.zip
Extract to a Folder
Download and extract to a folder on your PC, this will be the tool used to send custom packages (CAB) to the device and offer backup and restore features:
13. DeviceProvisioning.cab
Do not Extract!!
Copy this file into the “WP7 Update Cab Sender” folder.
Then run the “WP7 Update Cab Sender.bat”A DOS Window will open
╔════════════════════════════════════════════════════════════════════╗
║ WP7 Update Cab Sender xboxmod-Yuki 2011 ║
╠════════════════════════════════════════════════════════════════════╝
╠══════» S •(S)end Cabs to device
╠══════» B •Send Cabs to device with (B)ackup
╠══════» R •(R)estore device backup
╠══════» L •Read last Update (L)ogs from device
╚══> Your choice: S
Press “S”
The program will send the CAB to your phone, which will automatically restart the HD2 and show progress, once successful.
You will see this message in the DOS Windows
The device has been updated to version ****************
╚══════» Done
Exit MS dos Window
Delete DeviceProvisioning.cab from the “WP7 Update Cab Sender” folder.
14. Zune update 7712
Launch Zune and check for Updates it should find 7712 and Update Now. The update will take about 1.5 hours.
Once you are done with 7712 update you will see update successful
Exit Zune.
15. HD2-7720fix.rar
HD2-7720 Folder
Within there are two sub folders
MangoRTM
update tool
Open the MangoRTM folder and copy the files (If you know which languages you need, only take the ones you need, if you are unsure take all 8) copy them to the “WP7 Update Cab Sender” folder
Make sure you deleted deviceprovisioning.cab before and Zune is NOT running
Then run the “WP7 Update Cab Sender.bat”
A DOS Window will open
╔════════════════════════════════════════════════════════════════════╗
║ WP7 Update Cab Sender xboxmod-Yuki 2011 ║
╠════════════════════════════════════════════════════════════════════╝
╠══════» S •(S)end Cabs to device
╠══════» B •Send Cabs to device with (B)ackup
╠══════» R •(R)estore device backup
╠══════» L •Read last Update (L)ogs from device
╚══> Your choice: S
Press “S”
The program will send all the CAB’s to your phone, which will automatically restart the HD2 and show progress, once successful.
You will see this message in the DOS Windows
The device has been updated to version **************
╚══════» Done
Exit MS dos Window
Delete the CAB’s from the “WP7 Update Cab Sender” folder.
You’re now on 7720 MANGO
DO NOT STOP HERE
16. A Hard Reset is recommended.
Switch off the phone when the Magldr screen displays and you see
"Go Go Go 12345"
Press and Hold the Volume Up and Down keys at the same time.
If successful
You will see a white screen explaining that data will be erased,
Press Volume Down and Press Volume Down again, this is a hard reset.
Once you phone restarts, you can proceed to configure it, enter your activation code, Windows Live ID etc and set up your accounts.
Welcome to 7720 MANGO
Note:You can send other CAB’s to the phone by copying them “WP7 Update Cab Sender” folder and run the “WP7 Update Cab Sender.bat” do one at a time
Appendix
Adding Custom CAB's
Optional Add-on’s & Custom modifications
Please refer to this Thread by XBmod for links to additional CAB and additional Language packs.
The Concept:
Copy additional CAB file’s to the “WP7 Update Cab Sender” run “WP7 Update Cab Sender.bat” to send the file, you phone simply needs to be turned on and connected via USB to your PC.
Download the CAB you want and to a folder on your PC, you do not need to extract CAB’s.
You copy each CAB one at a time into the folder and use the tool to send custom packages (CAB) to the device and offer backup and restore features:
your_choice_.cab
Do not Extract!!
Copy this file into the “WP7 Update Cab Sender” folder.
Then run the “WP7 Update Cab Sender.bat”A DOS Window will open
╔═════════════════════════════════════════════════ ═══════════════════╗
║ WP7 Update Cab Sender xboxmod-Yuki 2011 ║
╠═════════════════════════════════════════════════ ═══════════════════╝
╠══════» S •(S)end Cabs to device
╠══════» B •Send Cabs to device with (B)ackup
╠══════» R •(R)estore device backup
╠══════» L •Read last Update (L)ogs from device
╚══> Your choice: S
Press “S”
The program will send the CAB to your phone, which will automatically restart the HD2 and show progress, once successful.
You will see this message in the DOS Windows
The device has been updated to version ****************
╚══════» Done
Exit MS dos Window
Delete your_choice_.cab from the “WP7 Update Cab Sender” folder. Send more or finish.
Language: In the MangoRTM Folder the files below are language packs.
Diff-7.10.7712.60-7.10.7720.68-armv7-Retail-Microsoft.Lang_0c0a.pks.cab
Diff-7.10.7712.60-7.10.7720.68-armv7-Retail-Microsoft.Lang_040c.pks.cab
Diff-7.10.7712.60-7.10.7720.68-armv7-Retail-Microsoft.Lang_0407.pks.cab
Diff-7.10.7712.60-7.10.7720.68-armv7-Retail-Microsoft.Lang_0409.pks.cab
Diff-7.10.7712.60-7.10.7720.68-armv7-Retail-Microsoft.Lang_0410.pks.cab
Diff-7.10.7712.60-7.10.7720.68-armv7-Retail-Microsoft.Lang_0809.pks.cab
Locale Code Table from Microsoft
Language in ROM
0x0c0a 1252 Spanish: Spain (Modern Sort)
0x0410 1252 Italian: Italy
0x040c 1252 French: France
0x0407 1252 German: Germany
0x0409 1252 English: United States)
0x0809 1252 English: United Kingdom
Optional Languages
Note: you must send both CAB's
LANG_0404_7661.cab & LANG_0404_7712.cab
LANG_0405_7661.cab & LANG_0405_7712.cab
LANG_0406_7661.cab & LANG_0406_7712.cab
LANG_0408_7661.cab & LANG_0408_7712.cab
LANG_040B_7661.cab & LANG_040B_7712.cab
LANG_040E_7661.cab & LANG_040E_7712.cab
LANG_0411_7661.cab & LANG_0411_7712.cab
LANG_0412_7661.cab & LANG_0412_7712.cab
LANG_0413_7661.cab & LANG_0413_7712.cab
LANG_0414_7661.cab & LANG_0414_7712.cab
LANG_0415_7661.cab & LANG_0415_7712.cab
LANG_0416_7661.cab & LANG_0416_7712.cab
LANG_0419_7661.cab & LANG_0419_7712.cab
LANG_041D_7661.cab & LANG_041D_7712.cab
LANG_0804_7661.cab & LANG_0804_7712.cab
LANG_0816_7661.cab & LANG_0816_7712.cab
0x1404 950 Chinese: Macao SAR (Traditional)
0x0405 1250 Czech: Czech Republic
0x0406 1252 Danish: Denmark
0x0408 1253 Greek: Greece
0x040b 1252 Finnish: Finland
0x040e 1250 Hungarian: Hungary
0x0411 932 Japanese: Japan
0x0412 949 Korean (Extended Wansung): Korea
0x0413 1252 Dutch: Netherlands
0x0414 1252 Norwegian: Norway (Bokmål)
0x0415 1250 Polish: Poland
0x0416 1252 Portuguese: Brazil
0x0419 1251 Russian: Russia
0x041d 1252 Swedish: Sweden
0x0804 936 Chinese: PRC (Simplified)
0x0816 1252 Portuguese: Portugal
Radio:
There are 2 different Radios:
Radios that you can flash using HardSPL:
For installing a RADIO ROM you need to use HardSPL on your device: it won't hardreset your device.
Changing the Radio in the ROM
UPDATE: XBmod is working on a CAB to change the Radio in the ROM, thus in the future you will be able to send the CAB and change the Radio.
At present use the instructions below.
To use a different Software Radio you need to change the Part00.bin in the 7004 Data.zip and start the process to 7720 all over again... As for the regular HD2 radio we can continue to flash away
Steps:
Download the radio you want to use
You'll get a part00.bin file
In the V1 or V2 ROM you can find a data.zip file
Replace in data.zip the part00.bin with the one you downloaded
Go through the usual process of installing the ROM
For EU Leo users who want to try 5.51 (without the t) see this post by LittleH79 .
Simple guide to replace the radio:
- Download 7zip from the web and install it.
- Download V2 rom.
- Download my radio attached.
- Extract attached radio to a folder (inside is part00.bin)
- Extract V2 rom to a folder
- Go to the extracted rom folder.
- In there you'll find Data.zip
- Open this folder with 7zip.
- Open the folder where you saved my attached radio (part00.bin)
- Simply drag file part00.bin inside 7zip window
- Wait a few moment and you're done
- Just to be sure, if it went well you'll see that file part00.bin has 2 dates changed
The Radio I’m sure will become a topic in its own right! what you have to remember is that there is no right or wrong Radio, it’s all about how close you are to a tower, Signal strength, country etc etc etc, right now to change the ROM radio you need to flash, hopefully someone can figure out how we can flash it without needing to Flash the ROM, perhaps a CAB.....
RADIO TABLE (need Data from folk for this)
SIM lockedIf you have SIM locked device from your mobile provider, before you upgrade to WP7 you must unlock the device (if you want SIM lock free). unlocking not working under WP7. For unlocking you must have unlock code... in most case, you must buy this code from any trusted GSM unlock site) or contact your carrier and ask them for an unlock code, typically they will give you one.
Thanks to dxdy
SD cards and unlocking them.
Once WP7 formats your SDcard, your computer won't read them since WP7 locked them this is part of the security feature built into WP7.
But if you need to, you can format the cards in certain devices, you should use one of thre following reported methods
Nokia N or E series
Nokia Phone
Nokia Symbian OS phone
PDA like 5250
N95
Canon camera
Nikon Camera
If you don’t have one of the above and rather than buying a new SD card, borrow one from a freind, or even go to a store and ask the store guy, and ask him if its ok that they let you use one to do it.
Custom and Special CAB's:
DEV_STORAGELOCK.cab (this will install the unlock tool for your sd card (providing the possibility of dualboot))
DEV_STORAGELOCK_REMOVE.CAB (as always a second CAB removing the above function "unlock tool" Warning your SDCard will be relocked at reboot resulting is dataloss.)
HTML 5
Is working.
This looks fantastic! I was having problems and just about to give up and go back to my previous rom, but this has given me a few areas where i could have gone wrong!
The installation instructions with the rom were sketch at most, so this is a great addition to yuki and XBmod's brilliant work!
I hope it's ok I post here...
I'm only a bit wary about doing this, because I don't have a serial to activate WP7.
Plus, I'd like to know if it's possible to have Portuguese(Portugal) as the display language, and how to do that...
Also, I got a 4GB, class 4, sd card from Kingston.
How do I know if it is compatible?
Can you help?
Ok, now I believe I could flash that ROM. All other explanations were written mostly for the authors. Thank you very much!!
a011528 said:
Q. I’m on V1 do I need to Start right from the beginning – re-run the whole Process?
A. Yes you do.
Click to expand...
Click to collapse
I went from v1 to v2 without going back to stock rom (6.5) but just flashing v2 on top of v1. Not had a single problem. So, it's up to you...
Edit: Nice tutorial!
RCOO said:
I hope it's ok I post here...
I'm only a bit wary about doing this, because I don't have a serial to activate WP7.
Plus, I'd like to know if it's possible to have Portuguese(Portugal) as the display language, and how to do that...
Also, I got a 4GB, class 4, sd card from Kingston.
How do I know if it is compatible?
Can you help?
Click to expand...
Click to collapse
Its not really okay for you to post a question on the front page, in the development section, but since you have now, i will answer your question, maybe it will add to the guide.
Unfortunatley i do not know about the language, but if you have look around the forums, you will easily find out that its not possible for anyone to say for sure whether your sd card will work, even when a card of the same spec works. So its purely luck. Try and flash Yuki's rooted rom on the developement section of this forum first, to determine whether your card works, then move onto this.
As for the activation code, you will only be asked for this when connecting to the marketplace.
I was able to get mine by phoning up, however some people have been unsuccessfull in doing this now, but its always worth a try. Then you code can be used multiple times, so if you flash over your rom, you can re-enter it again in a clear rom fairly easily, as long as you keep the same XBOX LIVE ID and dont change too often.
only small tip
if you have SIM locked device by mobile provider, before upgrade to WP7 you must unlock device (if you want SIM lock free). unlocking not working under WP7
for unlocking you must have unlock code... in most case, you must buy this code from any trusted GSM unlock site (unlock-now for example... very fast and good support)
stevemilw said:
Its not really okay for you to post a question on the front page, in the development section, but since you have now, i will answer your question, maybe it will add to the guide.
Unfortunatley i do not know about the language, but if you have look around the forums, you will easily find out that its not possible for anyone to say for sure whether your sd card will work, even when a card of the same spec works. So its purely luck. Try and flash Yuki's rooted rom on the developement section of this forum first, to determine whether your card works, then move onto this.
As for the activation code, you will only be asked for this when connecting to the marketplace.
I was able to get mine by phoning up, however some people have been unsuccessfull in doing this now, but its always worth a try. Then you code can be used multiple times, so if you flash over your rom, you can re-enter it again in a clear rom fairly easily, as long as you keep the same XBOX LIVE ID and dont change too often.
Click to expand...
Click to collapse
Thanks =p
Great work!!!!!!
This will be really helpfull for a lot of people
In Yuki's thread I made a (small) post about changing radio before flashing:
http://forum.xda-developers.com/showpost.php?p=17207345&postcount=2394
Maybe you can use some bits of it
LittleH79 said:
Great work!!!!!!
This will be really helpfull for a lot of people
In Yuki's thread I made a (small) post about changing radio before flashing:
http://forum.xda-developers.com/showpost.php?p=17207345&postcount=2394
Maybe you can use some bits of it
Click to expand...
Click to collapse
Lmao. I just added your post and this thread to favorites xD
Be carefull, you have a trouble with your last post:
the numbers are:
10, 11, 12, 1, 12, 13
i stuck at sending the cab to the phone, anyone can help?
http://forum.xda-developers.com/showthread.php?p=17129153&posted=1#post17129153
we need another post to *.cab fix the rom, can you make that please?
thanks
dAV84 said:
we need another post to *.cab fix the rom, can you make that please?
thanks
Click to expand...
Click to collapse
can you explain further?
hengmy said:
i stuck at sending the cab to the phone, anyone can help?
http://forum.xda-developers.com/showthread.php?p=17129153&posted=1#post17129153
Click to expand...
Click to collapse
I replied on the main board
Unfortunatley this guide hasnt worked for me.
During the stage of updating to 7008, on step 8, restarting your phone, the phone re-boots and locks up, i cannot move anything on the phone, and the installation will go no furrther.
Any ideas as to what this could be?
I cannot format my memory card again after applying the magldr services sub options (24mb thing and the other) so its basically dead to the computer, even through USB mass storage mode on MAGLDR.
Any ideas people? i flash 6.5 previous too with 2.15 rom. Left software radios the same, tried english us and uk when setting up phone for first time, neither worked.
See Pictures : http://www.trustedreviews.com/lenovo-k900_Mobile-Phone_review
Lenovo K900 key specifications
1) 5.5-inch 1080p IPS capacitive touch display
2) Intel Atom Z2580 2GHz dual-core processor (Clover Trail+)
3) 2GB RAM
4) 16GB internal storage
5) 13-megapixel camera with Sony's Exmor BSI sensor
6) 2-megapixel front camera
7) Android 4.2 Jelly Bean
Video (Lenovo executive telling about market availability) : http://www.youtube.com/watch?feature=player_detailpage&v=w2LFxXwqVNo#t=147s
will be sold in China, India, Russia, Philippines, Vietnam and Indonesia in first phase.
More images Benchmarks and detailed preview (use google translate) : http://hi-tech.mail.ru/review/misc/Lenovo_K900-prev.html
For Root and Google apps(if missing) :
Credit to cyman for finding this out
Cyman said:
Everything I write here is originally from lenovoforum.net (http://www.lenovohome.net/thread-161530-1-1.html) so every credit goes to them and also Google Translate, who helped me to understand that Chinese stuff
1) So, first you have to download their package. Because it's a very slow connection, I'll offer it via my Dropbox. Please, can someone upload it on another hoster? This would be great, thanks. Anyway, the download link is: https://www.dropbox.com/s/ilxyuc9gimzpa0q/联想K900纯净版含google谷歌服务框架版已root线刷包 (1).rar PW for unpacking: www.lenovohome.net
2) You have to install the things which you can find in one of the folders in this order: First IntelAndroidDrvSetup1.2.0 (you may try to install it with compatibility mode Windwos XP, worked for me), then iSocUSB-Driver-setup-1.0. 2.exe (during this process it will tell you, that you have to plug in your phone and turn it off with holding the power button for longer than 10 seconds and then turn it on again). If you suceed you will see that it installs a new driver "Colvertrail". At last, you may install ManufacturingFlashTool_Setup_6.0.2.exe.
3) Now let's prepare the ManufacturingFlashTool for flashing our K900.
I don't know how to put screenshots in here. So I just tell you: Go to settings and put in this values: SOC devices: VID: 8086, PID: 09EE / Android Devices: VID: 8087, PID: 09ef
Check "Override". You'll find a screenshot of the settings in one of the Chinese Word files in the download folder
4) Now you can open a file in ManufacturingFlashTool and you'll open the xml-File, which is in the Firmware-Folder (calles "flash-DVT3-CPU-sign")
5) Now the program is ready to flash and says: "waiting for device". So this is what you have to do: Power off your K900 with holding the power button for 11 seconds. It may be black now but it is running! Plug the phone in and now it should detect it and automatically begin to flash. Wait until it's100%. Sometimes it reboots and it says "waiting for device" but it will finish.
6) When you have completed 100%, you may detach the phone and power it on. It may take a few minutes for the first time but now you'll have Google Apps
7) How to get ROOT: Go to superuser and hit the settings button in the right upper corner. Set "security" "Automatic response" to "allow". No you cann go back in the superuser app and hit "update", it should do a root now. For a better x86-compatible Root Explorer, you can install the apk in the attachement
Please excuse my English. Maybe somebody can write a better Guide with pictures? But I know you wanted it fast By the way: If you can't execute the exe-Files, try to pack them into a new folder because Windwos seems to have problems with the folders with Chinese signs.
Click to expand...
Click to collapse
olegfusion said:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
Part Two:
I made HEX research and separated files from INB files. You'll not find those files in the internet, I didn't find it. So, I decided to research .inb
For debug, you can find them here:
https://mega.co.nz/#F!1YE1xDxC!IflBj13Im1549nu0feBvnw
Part Three:
I made root in the international 47 ROM.
how to?
1. download this system.img.gz:
2. go to fastboot mode (make sure you flashed 47 INB file already).
3. install manufacturing tool, all tools can be found here. https://mega.co.nz/#F!0UlDnLLR!IuQdqFqT-oIXtvRlQNtLBw Find fastboot in the program files folder, you'll need this fastboot.exe tool for intel phone.
4. use cmd,
fastboot erase system
fastboot flash system system.img.gz
by using those commands you re-flash system.img.gz that I made, it includes root (su library) and superuser. Superuser doesn't respond when need to allow or reject root, so you need to go and manually allow root rights in superuser for any application.
system img rooted: https://mega.co.nz/#F!MZ0SXRIT!R1ZAawbEjKcRm3ZXFJ0siA
Root was made by me, you'll not find this info in other sites. I write this info on xda first time.
Enjoy!
do not brick your phones, I'm not responsible if something you do wrong, but I tested and it works fine at my K900.
Click to expand...
Click to collapse
olegfusion said:
Yes.
But I found one more interesting thing. First time I flashed .inb file after chinese rom, but now I found full pack of fastboot files and flashed it (same 47 rom).
https://mega.co.nz/#F!IJF2hLYI!GpcLinegjjcRM6puQa0GXg
Wonder, but I have less heat releasing from the phone on the load of CPU.
I don't know why.
I recommend to flash full fastboot pack first, then boot and then step 4 - root.
p.s. files are uploaded
Click to expand...
Click to collapse
Nice
Markets : China, India, Russia, Philippines, Vietnam and Indonesia
still waiting for sertification in indonesia
Released in China http://thedroidguy.com/2013/05/lenovo-k900-china-availability-price-p780-massive-battery-release/
I hope it will be availible in Germany.
Sent from my Lenovo A789
Doesn't IBM own Lenovo? Anyway's great high end company. Makes great laptop and desktop. If price is good I would buy this then note2. Is this first android run on intel? I love the finish and the specs. But it's only a 3g .
jcervantes11 said:
Doesn't IBM own Lenovo? Anyway's great high end company. Makes great laptop and desktop. If price is good I would buy this then note2. Is this first android run on intel? I love the finish and the specs. But it's only a 3g .
Click to expand...
Click to collapse
Before this there were smartphones based on intel soc but only single core ones.
nikhiltanwar said:
Before this there were smartphones based on intel soc but only single core ones.
Click to expand...
Click to collapse
But on android? Is these atom as powerful as desktop atoms because desktop cpu and mobile cpu are totally different class.
jcervantes11 said:
But on android? Is these atom as powerful as desktop atoms because desktop cpu and mobile cpu are totally different class.
Click to expand...
Click to collapse
These are different but efficient.... like u see Dual core intel soc in this k900 matches performance of Octa core Samsung galaxy S4 ... there is difference of 6 cores and still it matches that performance.... desktops are still different class though... mobile devices cant score that kinda performance because of size of chip... Laptops have a powerful and bigger chip
$536 in china http://www.gsmarena.com/lenovo_k900_now_available_in_china_priced_at_536-news-6062.php
I can bet it wont be available in Europe because it is dual sim phone so it wont be available from operators.
robdevil said:
I can bet it wont be available in Europe because it is dual sim phone so it wont be available from operators.
Click to expand...
Click to collapse
will be available unlocked. but in later phases. Phase 1 is Asian countries
Hope so!
nice smartphone ,i'm already using it now ,but ,i need somebody help me find a way to get root~ because lenovo have install many apps can't be removed ,i don't need them。。。~!~
tadimy said:
nice smartphone ,i'm already using it now ,but ,i need somebody help me find a way to get root~ because lenovo have install many apps can't be removed ,i don't need them。。。~!~
Click to expand...
Click to collapse
Please post video.
---------- Post added at 08:29 PM ---------- Previous post was at 07:29 PM ----------
wait so it is only a 2g if i use tmobile? It goes up to 3g but why isn't it so it can be used on 4g network? This phone isn't worth nothing if data isn't quick.
It was rumooured to come on 10th mat for under 25 k..
Still not arrived and priced around 536$ 30k...
Now i dont think i would buy that ...
Instead i would prefer a note 2...
jcervantes11 said:
Please post video.
---------- Post added at 08:29 PM ---------- Previous post was at 07:29 PM ----------
wait so it is only a 2g if i use tmobile? It goes up to 3g but why isn't it so it can be used on 4g network? This phone isn't worth nothing if data isn't quick.
Click to expand...
Click to collapse
I just ordered one from China, so I'll find out if it works with T-Mobile. Intel's modem chip definitely supports UMTS 850/900/1900/2100. But if for some bizarre reason it's blocked by Lenovo, it should work at least on AT&T's 2100.
But it appears that it probably should work with T-Mobile as well. See this: http://forum.xda-developers.com/showthread.php?t=2286627
MacGuy2006 said:
I just ordered one from China, so I'll find out if it works with T-Mobile. Intel's modem chip definitely supports UMTS 850/900/1900/2100. But if for some bizarre reason it's blocked by Lenovo, it should work at least on AT&T's 2100.
But it appears that it probably should work with T-Mobile as well. See this: http://forum.xda-developers.com/showthread.php?t=2286627
Click to expand...
Click to collapse
What is the top speed of AT&T's 2100. I want a phone to run straight talk tmobile but i want the tmobile 4g speed. Or att 4g speed.
---------- Post added at 12:55 AM ---------- Previous post was at 12:54 AM ----------
MacGuy2006 said:
I just ordered one from China, so I'll find out if it works with T-Mobile. Intel's modem chip definitely supports UMTS 850/900/1900/2100. But if for some bizarre reason it's blocked by Lenovo, it should work at least on AT&T's 2100.
But it appears that it probably should work with T-Mobile as well. See this: http://forum.xda-developers.com/showthread.php?t=2286627
Click to expand...
Click to collapse
Please post picture and videos.
I bought one from China. Its an awesome device so far. Will be posting an unboxing on youtube later today. The part that sucks right now is no Google Play. I've just been sideloading my apps, but no google apps. I am trying to find information on how to root it. So far I haven't found anything. Please chime in if you have any info on that.
This tread is referring to a S7-721u version in Malaysia with Gr8 bundled pre-installed.
Unfortunately, I lost my Gr8 activation code and unable to login to the device anymore after a factory reset. After some research, I have managed to flash it with the original firmware. Yes, I lost me Gr8 code, so I don't have the access to the daily subscription anymore, but I got my Huawei Mediapad back without unwanted pre-installed apps.
I am sharing this guideline so that it would be easier for people who faced the same issue like me. For people already got your Huawei Mediapad, keep your Gr8 code safe and remember where you keep it.
Prepare an microSD card with any storage size larger than 1GB.
Format microSD card.
Download Huawei official release firmware (S7-721u, Android4.3, C232B008, General).
Unzip downloaded firmware.
Delete file “au_temp.cfg” in dload folder.
Copy dload folder with UPDATA.APP in it.
Paste dload folder in your microSD card.
Power Off Huawei Mediapad. Insert microSD card.
Press Power + volume up + volume down keys together. The phone automatically enters the upgrade mode, and then begin the upgrade. Release the keys.
Once the progress bar reaches 100%, the phone will automatically restart. DONE!
What is new version C232B008 or C264B001? My tablet is on C264B001.
mugy said:
What is new version C232B008 or C264B001? My tablet is on C264B001.
Click to expand...
Click to collapse
No idea. Sorry.
Deleting the au_temp.cfg.
sunnysardine said:
This tread is referring to a S7-721u version in Malaysia with Gr8 bundled pre-installed.
Unfortunately, I lost my Gr8 activation code and unable to login to the device anymore after a factory reset. After some research, I have managed to flash it with the original firmware. Yes, I lost me Gr8 code, so I don't have the access to the daily subscription anymore, but I got my Huawei Mediapad back without unwanted pre-installed apps.
I am sharing this guideline so that it would be easier for people who faced the same issue like me. For people already got your Huawei Mediapad, keep your Gr8 code safe and remember where you keep it.
Prepare an microSD card with any storage size larger than 1GB.
Format microSD card.
Download Huawei official release firmware (S7-721u, Android4.3, C232B008, General).
Unzip downloaded firmware.
Delete file “au_temp.cfg” in dload folder.
Copy dload folder with UPDATA.APP in it.
Paste dload folder in your microSD card.
Power Off Huawei Mediapad. Insert microSD card.
Press Power + volume up + volume down keys together. The phone automatically enters the upgrade mode, and then begin the upgrade. Release the keys.
Once the progress bar reaches 100%, the phone will automatically restart. DONE!
Click to expand...
Click to collapse
How important is it to delete that file. Is that the reason why when i install the update it says "update.app is a invalid package"? Thanks mate.
Hi. I just reinstall the software, but how do I get back my e papers subscriptions?
Is there any costum rom, and i have this tablet locked on one network ,is there a solution to run other network.thanks in advance.
I did all as you said, but now my tablet is completely dead.
Thanks it worked.
Provide the download link for the firmware please?
Thx Sunnysardine, it works for me.
Just to add a bit for my experience.
The process 1 - 8 MUST be followed exactly. I tried putting the update.app w/o the load folder, it did not work
For process 10, it takes a bit of time. the Huawei logo showed up for quite long before it power up to 1st screen. after that, all well. So got to be patient a little bit
Thanks man
I followed ur instructions exactly and it works, nice
If not for this, I would have thrown away my mediapad, it totally not login-able/ unusable without Gr8 code
Thanks again!
it is work for me.. thanks for sharing
Hi there, I found a way to remove GR8 app without installing the update. I found out that due to the device cannot detect the update in my sd card.
1) turn on the Huawei media pad s7-721u, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
This is where you can download the firmware
[email protected]@/download/downloadCenter?downloadId=27805&version=51115&siteCode=pk
Wrong Firmware
sunnysardine said:
This tread is referring to a S7-721u version in Malaysia with Gr8 bundled pre-installed.
Unfortunately, I lost my Gr8 activation code and unable to login to the device anymore after a factory reset. After some research, I have managed to flash it with the original firmware. Yes, I lost me Gr8 code, so I don't have the access to the daily subscription anymore, but I got my Huawei Mediapad back without unwanted pre-installed apps.
I am sharing this guideline so that it would be easier for people who faced the same issue like me. For people already got your Huawei Mediapad, keep your Gr8 code safe and remember where you keep it.
Prepare an microSD card with any storage size larger than 1GB.
Format microSD card.
Download Huawei official release firmware (S7-721u, Android4.3, C232B008, General).
Unzip downloaded firmware.
Delete file “au_temp.cfg” in dload folder.
Copy dload folder with UPDATA.APP in it.
Paste dload folder in your microSD card.
Power Off Huawei Mediapad. Insert microSD card.
Press Power + volume up + volume down keys together. The phone automatically enters the upgrade mode, and then begin the upgrade. Release the keys.
Once the progress bar reaches 100%, the phone will automatically restart. DONE!
Click to expand...
Click to collapse
How can I fix the tablet after being flashed with wrong firmware?
It doesn't turn on and in QPST or QFIL it was in download mode.
I have correct firmware and its dump.
I have a zebra tc51.
I have all the images roms , reset files etc
Iv been trying to root the device for such time
Iv tried it on android 6.0.1 and android 7.0.1
Unsure if it's possible to root or allow much via the update.zip ( images of the device ) using there update-script
Reasons , debloatware it, we use our devices to emulate NFC to access doors etc for the functions we need , we change a lot of the operating system on our other devices to have. Better user function and ease of access , some functions and features of our software we run don't work due to having no access to parts of the system we have a device we can hardly use I have a another device with 5.0.1 from zebra but it's a older one that is rooted but it dose not have the hardware support we have
If someone is happy to help me unlock this device I'm happy to help pay some kind of support for your effort or send you a old zebra m40 something (haha)
But endless web hours on this topic for me , been looking at editing the update.zip
And allowing root support but I'm unsure
It's going on eBay shortly
TC51
I have a zebra tc 51 and tc70, both of which I have to unlock/reset to factory. Could you provide me with the files you have for your tc51? It would be greatly appreciated.
Zebra TC51
Could you please send me the reset files and firmware i would greatly appreciate it?
TC51 HELP!!! Please
Can you please share the TC51 reset file please?
Tc51
nobullv said:
I have a zebra tc51.
I have all the images roms , reset files etc
Iv been trying to root the device for such time
Iv tried it on android 6.0.1 and android 7.0.1
Unsure if it's possible to root or allow much via the update.zip ( images of the device ) using there update-script
Reasons , debloatware it, we use our devices to emulate NFC to access doors etc for the functions we need , we change a lot of the operating system on our other devices to have. Better user function and ease of access , some functions and features of our software we run don't work due to having no access to parts of the system we have a device we can hardly use I have a another device with 5.0.1 from zebra but it's a older one that is rooted but it dose not have the hardware support we have
If someone is happy to help me unlock this device I'm happy to help pay some kind of support for your effort or send you a old zebra m40 something (haha)
But endless web hours on this topic for me , been looking at editing the update.zip
And allowing root support but I'm unsure
It's going on eBay shortly
Click to expand...
Click to collapse
Could you please share the TC51 firmware with me?
reset TC51 is possible
I reset TC 51 successfully a week ago. Just go to zebra site under support for mobile computers and then into android 6 OS and the third "+Full Image"
and download: Atlas_Ent_Reset.zip. place in a FAT32 SC card in root dir, hold down power and scan (top left) buttons concurrently til logo. Select flash via SC card and hit power. 6 min later, full reset to all default apps.
Need that firmware plz
Could you please share the TC51 firmware with me? Is thus working
Frankendex666 said:
Could you please share the TC51 firmware with me? Is thus working
Click to expand...
Click to collapse
Hi, Sorry for not being more clear regarding the file I mentioned above. The reset file I stated to download and flash to phone is not a firmware image for the TC51. It is a file that when applied to the phone via updating from the SD card. It is instructions to the phone to commanding it to hard rest itself. It is a very small file, I dont remember, but I think like 15mb, whereas firmware img files are far larger.
The are to versions, one being enterprise - it will reset with enterprise partition not being wiped and the non enterprise reset file will wipe all.
8 or so minutes later, you will have a TC51 booted into its default state, apps and all. Any passcodes locking it are cleared. The above enterprise/nonenterprise reset files are available for google services or none.
Once you click the one of the full image "+" symbols to expand the subtree, you will see the files I mention. You will also see the full image files you are asking about but you cannot download them without permission.
Sorry for the long msg, but one last point is, the small reset files that do not require password verif to download, I guess basically the phone is reset as if the stock rom was reflashed to it, but without the img flash. I did this week ago and works well. I am new to this forum, joining only to state the easy reset of the TC51 and have not seen any rules as to what types of uploads are permitted here, if all cool, I can upload the files here.
Hello
I am also in need of the 6.0 or 7.0 firmware pls nd thank u
My guy you are freaking money. I have been trying to unlock mine for like a year and have constantly gotten stumped.
Thanks very much for the help. Sending massive good juju your way.
jrgram said:
Hi, Sorry for not being more clear regarding the file I mentioned above. The reset file I stated to download and flash to phone is not a firmware image for the TC51. It is a file that when applied to the phone via updating from the SD card. It is instructions to the phone to commanding it to hard rest itself. It is a very small file, I dont remember, but I think like 15mb, whereas firmware img files are far larger.
The are to versions, one being enterprise - it will reset with enterprise partition not being wiped and the non enterprise reset file will wipe all.
8 or so minutes later, you will have a TC51 booted into its default state, apps and all. Any passcodes locking it are cleared. The above enterprise/nonenterprise reset files are available for google services or none.
Once you click the one of the full image "+" symbols to expand the subtree, you will see the files I mention. You will also see the full image files you are asking about but you cannot download them without permission.
Sorry for the long msg, but one last point is, the small reset files that do not require password verif to download, I guess basically the phone is reset as if the stock rom was reflashed to it, but without the img flash. I did this week ago and works well. I am new to this forum, joining only to state the easy reset of the TC51 and have not seen any rules as to what types of uploads are permitted here, if all cool, I can upload the files here.
Click to expand...
Click to collapse
May I request these Files As well Thank you feel free to dm or email me links : [email protected]
I have a frp Locked zebra tc510k-1pazu2p-us
I am interested in unlocking and rooting my TC-51 as well. Could you please PM me a copy of this file?
tc51 said:
I am interested in unlocking and rooting my TC-51 as well. Could you please PM me a copy of this file?
Click to expand...
Click to collapse
I think I may have misunderstood. I thought these files were for rooting. Not just for resetting. It will still be nice to get a copy of them though.
request help in reseting Motorola Zebra TC51 back to default, aswell as root or TWRP, need to bypass/remove mobicontrol been to long and forgot admin password Thank You all help appriciated i know it's an old thread but it's a $2k PDA i need to revive it.
EDIT!!:
jrgram said:
I reset TC 51 successfully a week ago. Just go to zebra site under support for mobile computers and then into android 6 OS and the third "+Full Image"
and download: Atlas_Ent_Reset.zip. place in a FAT32 SC card in root dir, hold down power and scan (top left) buttons concurrently til logo. Select flash via SC card and hit power. 6 min later, full reset to all default apps.
Click to expand...
Click to collapse
ThankYou so much JRGRAM you saved me!!! let me refine his steps that i used to perform a reset
Step 1: Download Atlas_Ent_Reset.zip from Just go to zebra site under support for mobile computers or search "TC51" and look under downloads
Step 2 : Place the .ZIP you downloaded on a micro sdcard
Step 3 Place on Root of sdcard
Step 4: Hold down power and scan (top left) buttons consecutively recovery menu shows up.
Step 5: Select flash via SDcard let it finish then click reboot option.
Step 6: PROFIT!! now you back to stock firmware also gets rid of Soti MobiControl!!
nobullv said:
I have a zebra tc51.
I have all the images roms , reset files etc
Iv been trying to root the device for such time
Iv tried it on android 6.0.1 and android 7.0.1
Unsure if it's possible to root or allow much via the update.zip ( images of the device ) using there update-script
Reasons , debloatware it, we use our devices to emulate NFC to access doors etc for the functions we need , we change a lot of the operating system on our other devices to have. Better user function and ease of access , some functions and features of our software we run don't work due to having no access to parts of the system we have a device we can hardly use I have a another device with 5.0.1 from zebra but it's a older one that is rooted but it dose not have the hardware support we have
If someone is happy to help me unlock this device I'm happy to help pay some kind of support for your effort or send you a old zebra m40 something (haha)
But endless web hours on this topic for me , been looking at editing the update.zip
And allowing root support but I'm unsure
It's going on eBay shortly
Click to expand...
Click to collapse
Were you ever able to get root access? I am in the same boat, I have reached out to Zebra for assistance in unlocking the bootloader but they have not responded.
I did search in the software license which (according to their site ) says:
For instructions on how to obtain a copy of any source code made publicly available by Zebra related to Open Source Software distributed by Zebra, you may send your request in writing to:
Zebra Technologies Corporation
Open Source Software Director
Legal Department
3 Overlook Point
Lincolnshire, IL 60069 USA
In your request, please include the Zebra Product name and version, along with the Open Source Software specifics, such as the Open Source Software name and version.
Click to expand...
Click to collapse
I have not written to them on this matter through snail-mail. Perhaps that is the next step. As an indie dev its was hard enough to get access the the software revisions. I had to jump many hoops and it took over 6 months to get access the GMS and non-GMS versions for Marshmellow, Nougat, and Oreo.
Factory reset
File on MEGA
mega.nz
Enterprise
File on MEGA
mega.nz
0ddtizm said:
Ripristino delle impostazioni di fabbrica
[URL unfurl = "true"] https://mega.nz/file/QmhTFY6S#48AAiluKHBKCDcuP6GoBXvifM53GggeFGgCk4eid7dg [/ URL]
Enterprise
[URL unfurl = "true"] https://mega.nz/file/oq4HnC5S#c42gr3WXwk2jSMU-qCI2UYeyq5Rq_-QStlJSLdLJLy4 [/ URL]
Click to expand...
Click to collapse
ciao potresti ri mettere i link di mega graziee
0ddtizm said:
Factory reset
File on MEGA
mega.nz
Enterprise
File on MEGA
mega.nz
Click to expand...
Click to collapse
hi mr .please i need this firmware.
HI EVERYONE .Hope you are doing well. I really need that zebra TC51 firmware .
vickarim said:
HI EVERYONE .Hope you are doing well. I really need that zebra TC51 firmware .
Click to expand...
Click to collapse
Could you please share the TC51 firmware with me if you will have it