Related
Hi all,
I want to update to global rom, but i can't enter EDL mode as shown in this guide : http://en.miui.com/thread-235865-1-1.html
Can someone tell me if i need to flash it in EDL mode or can i flash it through fastboot using miflash(in this case do i need to clear all data?)?
Update app not working, can't verify update message.
I am on the redmi note 3 snapdragon, version 7.2.5 china
Who can explain me what to do?
Solved by reinstalling adb & fastboot package
Sir one question- I want to flash Chinese ROM on my global ROM. Do I have to unlock bootloader?
ankjain said:
Sir one question- I want to flash Chinese ROM on my global ROM. Do I have to unlock bootloader?
Click to expand...
Click to collapse
No you do not have to. Flash it according to the tutorial in the link above. Make sure you have all programs and fastboot drivers installed on your pc and it should go very quickly. You will have to wipe user data and such, so remember that.
The fastboot rom is also there in the link.
Please anyone to tell me, how to flash miui rom from cm 14.1?
I have tried twice to flash miui rom like dev.china and miuipro rom, but i get bootlop, so i install again twrp zcx and restore my backup.... I have tried too for flash miui rom using miflash with edl method but dont work....still error (max buffer) i dont know whats that...try again ....and again but still dont work.....please help dev....
Needed more info i think..
What RN3 version do you have..?
What rom version you're trying flash with miflash..?,
Is it right fastboot rom for kenzo..?,
What miflash version you're using it..?
And did your phone already right detected in your pc and miflash while in EDL mode..?
abhy27 said:
Please anyone to tell me, how to flash miui rom from cm 14.1?
I have tried twice to flash miui rom like dev.china and miuipro rom, but i get bootlop, so i install again twrp zcx and restore my backup.... I have tried too for flash miui rom using miflash with edl method but dont work....still error (max buffer) i dont know whats that...try again ....and again but still dont work.....please help dev....
Click to expand...
Click to collapse
I dont know how you are flashing..I assume it is through TWRP. You are getting boot loop because your bootloader is locked. Unlock it through miflashunlock and it should be working again
JJeamy said:
Needed more info i think..
What RN3 version do you have..?
What rom version you're trying flash with miflash..?,
Is it right fastboot rom for kenzo..?,
What miflash version you're using it..?
And did your phone already right detected in your pc and miflash while in EDL mode..?
Click to expand...
Click to collapse
Thanks for ur respon....this my kenzo, i try flash china dev rom with mi flash ,my phone is detect using pdaphone tools and i see com10 detect on miflash, miflash version is update from miui....and i also using miflash beta....all miflash do i have
kirankowshik said:
I dont know how you are flashing..I assume it is through TWRP. You are getting boot loop because your bootloader is locked. Unlock it through miflashunlock and it should be working again
Click to expand...
Click to collapse
I am using zcx twrp....is it not compatible???
kirankowshik said:
I dont know how you are flashing..I assume it is through TWRP. You are getting boot loop because your bootloader is locked. Unlock it through miflashunlock and it should be working again
Click to expand...
Click to collapse
I have tried unlock using miflash unlock official but stuck in 50%, try again and again but still dont work...
abhy27 said:
I have tried unlock using miflash unlock official but stuck in 50%, try again and again but still dont work...
Click to expand...
Click to collapse
Are you able to get into fastboot?
If you are, check using the command fastboot devices oem-info. If it shows device unlocked as true, follow this guide
http://en.miui.com/thread-250455-1-1.html
Your device should be back to life.
Or else, take it to service center and get the rom flashed free of cost
abhy27 said:
Thanks for ur respon....this my kenzo, i try flash china dev rom with mi flash ,my phone is detect using pdaphone tools and i see com10 detect on miflash, miflash version is update from miui....and i also using miflash beta....all miflash do i have
Click to expand...
Click to collapse
What version of windows you're using..?, Did you already tried flashing EDL mode with another pc..?, because some windows version get troubled about driver, and other 3rd party software in their windows system while using specific MiFlash tool.
Also you can try it flashing EDL mode with older version of MiFlash, you can download it from here.. but this version doesn't support 32bit system, you must using 64bit system.
JJeamy said:
What version of windows you're using..?, Did you already tried flashing EDL mode with another pc..?, because some windows version get troubled about driver, and other 3rd party software in their windows system while using specific MiFlash tool.
Also you can try it flashing EDL mode with older version of MiFlash, you can download it from here.. but this version doesn't support 32bit system, you must using 64bit system.
Click to expand...
Click to collapse
Thanks all, the problem is I used 32 bit system, and now I have unlocked again via miflash unlock.....
hi all , 2 days back i installed latest cm 14.1 official nightly and i found speaker and microphone not working , then cleaned all data and did clean flashing thus same problem exists , and i saw a cm 14 firmware 20161205 like that and tried flashing it to make my speaker and microphone work ! but after doing it my mobile is not turning into recovery or booting up , only fastboot mode working!
things i tried after this
1.flashing both global and developer fastboot rom using miflashtool , but same remains
2.then tried installing twrp and mi recovery but both didnt work , same status
3.tried disconnecting battery and connecting , no improvement
pls help me out !!!
thanks in advance , help as soon as possible :crying: :crying:
Balakrishnan79 said:
hi all , 2 days back i installed latest cm 14.1 official nightly and i found speaker and microphone not working , then cleaned all data and did clean flashing thus same problem exists , and i saw a cm 14 firmware 20161205 like that and tried flashing it to make my speaker and microphone work ! but after doing it my mobile is not turning into recovery or booting up , only fastboot mode working!
things i tried after this
1.flashing both global and developer fastboot rom using miflashtool , but same remains
2.then tried installing twrp and mi recovery but both didnt work , same status
3.tried disconnecting battery and connecting , no improvement
pls help me out !!!
thanks in advance , help as soon as possible :crying: :crying:
Click to expand...
Click to collapse
Had same issue.. Unlock the bootloader again... Worked for me btw i have unlocked bootloader unofficially...
$lim $hady said:
Had same issue.. Unlock the bootloader again... Worked for me btw i have unlocked bootloader unofficially...
Click to expand...
Click to collapse
how to do that again can you give brief info please and the fastboot rom you used and the miflashtool you used , and did u used the emnc.bn old file ?
How did you unlocked your bootloader ??
Balakrishnan79 said:
how to do that again can you give brief info please and the fastboot rom you used and the miflashtool you used , and did u used the emnc.bn old file ?
Click to expand...
Click to collapse
dweh said:
How did you unlocked your bootloader ??
Click to expand...
Click to collapse
Refer this thread
http://forum.xda-developers.com/redmi-note-3/help/help-t3502477
Follow [email protected] post... you can easily unlock bootloader unofficially
Greetings!
I'm facing this weird problem that some people seem to have as well. The device is recognizing my SIM card, but there's no network connectivity. I cannot connect to WiFi and it's showing this ridiculous MAC address. Bluetooth can be enabled, but other devices can't see it, so it's malfunctioning as well.
I have this problem on many official ROMs. Bootlocker is locked.
I'm currently on Lineage OS. Installing it set my IMEI to 0, but I restored it with IMEI Changer (WriteDualIMEI(W+G_eMMC).exe).
Should I unlock the bootloader and flash modem NON-HLOS.bin, to attempt to restore network connectivity?
Have you check imei ???
if you have twrp alka backup then restore it.
Faced problem when downgrading miui mm to miui lp
[email protected] said:
Have you check imei ???
if you have twrp alka backup then restore it.
Faced problem when downgrading miui mm to miui lp
Click to expand...
Click to collapse
Thanks for replying. My IMEI is fine, as I mentioned in the first post. I don't have any backups, since I've just installed TWRP earlier today.
This n backup with alka keep saafe
Then flash latest miui mm dev via edl flash all unlock official
Then flash latest lineage
[email protected] said:
This n backup with alka keep saafe
Then flash latest miui mm dev via edl flash all unlock official
Then flash latest lineage
Click to expand...
Click to collapse
I tried multiple official roms, both dev and stable, Lollipop and Marshmallow. It's not a Lineage problem. I cannot unlock the bootloader officially, as I get stuck at 50% when it's trying to verify my device. I cannot log in to my MIUI account as there's no way for me to connect to the Internet.
Skochko said:
I tried multiple official roms, both dev and stable, Lollipop and Marshmallow. It's not a Lineage problem. I cannot unlock the bootloader officially, as I get stuck at 50% when it's trying to verify my device. I cannot log in to my MIUI account as there's no way for me to connect to the Internet.
Click to expand...
Click to collapse
Use download miui 8 6.11.3 fastboot ROM
Then flashing via edl just replace recovery IMG of stock to zcx after seeing operation completed successful
Then force reboot recovery
Then backup current ROM then factory reset + wipe system flash aosp 5.1.1 by Mr coldbird
Then reboot
Then chectout wifi ac and other stuff
Otherwise use this guide to unlock unofficially
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-beast-redmi-note-3-t3492297
[email protected] said:
Use download miui 8 6.11.3 fastboot ROM
Then flashing via edl just replace recovery IMG of stock to zcx after seeing operation completed successful
Then force reboot recovery
Then backup current ROM then factory reset + wipe system flash aosp 5.1.1 by Mr coldbird
Then reboot
Then chectout wifi ac and other stuff
Otherwise use this guide to unlock unofficially
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-beast-redmi-note-3-t3492297
Click to expand...
Click to collapse
I got same problem - MAC address is 02:00:00:00:00
Any luck to find a solution?
thanks!
pporchuk said:
I got same problem - MAC address is 02:00:00:00:00
Any luck to find a solution?
thanks!
Click to expand...
Click to collapse
Did anyone consider that hardware module for wifi &* bt is broken?
Check your phone box. The problem seems that your hardwares aren't detected right which need to be manually fixed by changing the Bluetooth and WiFi MAC Address. You can find the original hardware address on the box. And do some research on the Internet that works for your phone
Redmi note 3 kenzo WiFi, BT. MAC address is 02:00:00:00:00 problem
Redmi note 3 kenzo WiFi, BT. MAC address is 02:00:00:00:00. And imei is fine. What to do? Explain step by step!
Aditya krishna_ said:
Redmi note 3 kenzo WiFi, BT. MAC address is 02:00:00:00:00. And imei is fine. What to do? Explain step by step!
Click to expand...
Click to collapse
Having same issue . pls help
My Poco sensors stoped working while o was flashing some ROM I don't remember but it was maybe an sGSI.
After flashing alot of vendors on miui or pixel e, iam still facing the same issue.
Any help would really be appreciated
Stock with miflash.....and always backup...lesson learned
seems like persist.img is corrupted!
if you have fastboot rom (miui10.3.7 (2.7gb) , extract it, and further extract it, i will come something 8 gb in total!
inside images folder there will be persist.img
flash that img file, in TWRP /persist PARTITION (BE CARE FUL !!!!!!!!!!!!!!!!)
or better use ORANGE FOX RECOVERY to flash PERSIST.img
then reboot device and check!
if it still doesnt work then use miflasher, and flash this FASTBOOT rom from image folder!
REMEMBER!!!!!!!! don't tick the box, "FLASH ALL AND LOCK" this will relock your bootloader! , simply select "FLASH ALL" button in miFLASHER (down-right)
YasuHamed said:
seems like persist.img is corrupted!
if you have fastboot rom (miui10.3.7 (2.7gb) , extract it, and further extract it, i will come something 8 gb in total!
inside images folder there will be persist.img
flash that img file, in TWRP /persist PARTITION (BE CARE FUL !!!!!!!!!!!!!!!!)
or better use ORANGE FOX RECOVERY to flash PERSIST.img
then reboot device and check!
if it still doesnt work then use miflasher, and flash this FASTBOOT rom from image folder!
REMEMBER!!!!!!!! don't tick the box, "FLASH ALL AND LOCK" this will relock your bootloader! , simply select "FLASH ALL" button in miFLASHER (down-right)
Click to expand...
Click to collapse
mi flash failed to do the job and came out with error. booted fine but sensors still broken.
twrp and orange fox have no persist.img chose when flashing.
anyways thx 4 help. i hope i can get out outta this:crying::crying:
iam using miui 9.6.18 bcz i want oreo
lokixd4x4 said:
mi flash failed to do the job and came out with error. booted fine but sensors still broken.
twrp and orange fox have no persist.img chose when flashing.
anyways thx 4 help. i hope i can get out outta this:crying::crying:
iam using miui 9.6.18 bcz i want oreo
Click to expand...
Click to collapse
according to this video https://youtu.be/JKShaUdpvQw?t=374 its platform file issue,
download latest version from
https://forum.xda-developers.com/android/software/tool-platform-tools-adb-fasbootdrivers-t3061441
extract platform folder, put FASTBOOT FILES of MIUI rom in Platform folder and then try flashing
also
put everything in root C:/ and only one folder "C:\images"
long paths are not recomended for MIflasher!
@YasuHamed bro I am facing the exact same issue with a window popup on screen says find device is corrupted your device is unsafe now. Did you find a solution . Please help .brother.
abhisheksh9999 said:
@YasuHamed bro I am facing the exact same issue with a window popup on screen says find device is corrupted your device is unsafe now. Did you find a solution . Please help .brother.
Click to expand...
Click to collapse
i gave up and started using custom roms! they are closer to Stock android and have amazing customizations!
Evolution / Havoc / AeX on android 10 is amazing!
Reloaded OS (android10) is CAF based rom and its faster than others but have no customizations!
CR droid has maximum customizations but its little laggy!
you may also use
Masik13.3 and XiaomiEu roms which are Modified MIUI versions! ( google MIUI ROM BUILDER) and you can predefine features!
these roms can them be flashed via Twrp!
lokixd4x4 said:
mi flash failed to do the job and came out with error. booted fine but sensors still broken.
twrp and orange fox have no persist.img chose when flashing.
anyways thx 4 help. i hope i can get out outta this:crying::crying:
iam using miui 9.6.18 bcz i want oreo
Click to expand...
Click to collapse
Did you find any way to fix the sensors?
I think i too made the same mistake some two months back after flashed peplus rom.. i noticed it only recently.