Please anyone to tell me, how to flash miui rom from cm 14.1?
I have tried twice to flash miui rom like dev.china and miuipro rom, but i get bootlop, so i install again twrp zcx and restore my backup.... I have tried too for flash miui rom using miflash with edl method but dont work....still error (max buffer) i dont know whats that...try again ....and again but still dont work.....please help dev....
Needed more info i think..
What RN3 version do you have..?
What rom version you're trying flash with miflash..?,
Is it right fastboot rom for kenzo..?,
What miflash version you're using it..?
And did your phone already right detected in your pc and miflash while in EDL mode..?
abhy27 said:
Please anyone to tell me, how to flash miui rom from cm 14.1?
I have tried twice to flash miui rom like dev.china and miuipro rom, but i get bootlop, so i install again twrp zcx and restore my backup.... I have tried too for flash miui rom using miflash with edl method but dont work....still error (max buffer) i dont know whats that...try again ....and again but still dont work.....please help dev....
Click to expand...
Click to collapse
I dont know how you are flashing..I assume it is through TWRP. You are getting boot loop because your bootloader is locked. Unlock it through miflashunlock and it should be working again
JJeamy said:
Needed more info i think..
What RN3 version do you have..?
What rom version you're trying flash with miflash..?,
Is it right fastboot rom for kenzo..?,
What miflash version you're using it..?
And did your phone already right detected in your pc and miflash while in EDL mode..?
Click to expand...
Click to collapse
Thanks for ur respon....this my kenzo, i try flash china dev rom with mi flash ,my phone is detect using pdaphone tools and i see com10 detect on miflash, miflash version is update from miui....and i also using miflash beta....all miflash do i have
kirankowshik said:
I dont know how you are flashing..I assume it is through TWRP. You are getting boot loop because your bootloader is locked. Unlock it through miflashunlock and it should be working again
Click to expand...
Click to collapse
I am using zcx twrp....is it not compatible???
kirankowshik said:
I dont know how you are flashing..I assume it is through TWRP. You are getting boot loop because your bootloader is locked. Unlock it through miflashunlock and it should be working again
Click to expand...
Click to collapse
I have tried unlock using miflash unlock official but stuck in 50%, try again and again but still dont work...
abhy27 said:
I have tried unlock using miflash unlock official but stuck in 50%, try again and again but still dont work...
Click to expand...
Click to collapse
Are you able to get into fastboot?
If you are, check using the command fastboot devices oem-info. If it shows device unlocked as true, follow this guide
http://en.miui.com/thread-250455-1-1.html
Your device should be back to life.
Or else, take it to service center and get the rom flashed free of cost
abhy27 said:
Thanks for ur respon....this my kenzo, i try flash china dev rom with mi flash ,my phone is detect using pdaphone tools and i see com10 detect on miflash, miflash version is update from miui....and i also using miflash beta....all miflash do i have
Click to expand...
Click to collapse
What version of windows you're using..?, Did you already tried flashing EDL mode with another pc..?, because some windows version get troubled about driver, and other 3rd party software in their windows system while using specific MiFlash tool.
Also you can try it flashing EDL mode with older version of MiFlash, you can download it from here.. but this version doesn't support 32bit system, you must using 64bit system.
JJeamy said:
What version of windows you're using..?, Did you already tried flashing EDL mode with another pc..?, because some windows version get troubled about driver, and other 3rd party software in their windows system while using specific MiFlash tool.
Also you can try it flashing EDL mode with older version of MiFlash, you can download it from here.. but this version doesn't support 32bit system, you must using 64bit system.
Click to expand...
Click to collapse
Thanks all, the problem is I used 32 bit system, and now I have unlocked again via miflash unlock.....
Related
Hello, I updated my redmi note 3 to The 6.9.9 stable version:fingers-crossed:. But as there as many bugs, I tried to rollback to the previous version:silly:. But I'm now stuck on Bootloop:crying::crying:. Help me plz. ADB is not enabled, bootloader is locked & the phone is not rooted.
Use EDL mode. Search it in Google (MIUI Forum).
is EDL also used to get completly stock? i might sell my kenzo to buy a kate ... and i would like to sell with official global stable
EDL is used if your device bootloader is not unlocked.. The fastboot method is for unlocked bootloader only.. Yes, completely stock
Sorry, i should have posted whats my device status:
1. flashed global dev rom via EDL mode
2. updated to MIUI 6.9.9 6.0.1 MM
3. unlocked bootloader officialy with xiaomi tool
4. flashed ALKA TWRP
5. Did a wipe because phone encryption was on, after wipe i was able to backup all partitions
6. flashed Supersu
Now if i want to go completly stock, do i have to flash latest MIUI rom via fastboot instead of EDL?
Then everything is back to stock, even the Bootloader is locked?
It's up to you, it's same.. EDL should be fine
---------- Post added at 03:07 PM ---------- Previous post was at 03:01 PM ----------
Go flash it via fastboot
Tyuzva said:
Use EDL mode. Search it in Google (MIUI Forum).
Click to expand...
Click to collapse
EDL isn't working... While updating it stucks on 25% & says.. Not enough space.. Although the phone is empty
Da_SilentKnight said:
EDL isn't working... While updating it stucks on 25% & says.. Not enough space.. Although the phone is empty
Click to expand...
Click to collapse
Your Windows is 32Bits? If yes, use latest MiFlash tool. And check if file folder has no spaces like this C:\Users\Name\Desktop\Redmi Note\
If has space, remove all spaces. Put ROM in C:\ROM folder for example...
Da_SilentKnight said:
EDL isn't working... While updating it stucks on 25% & says.. Not enough space.. Although the phone is empty
Click to expand...
Click to collapse
use new version of mi flash tool
http://en.miui.com/thread-281979-1-1.html (i am using it)
and fastboot edl
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
and ya plz do not make log dict.
e.g D:/xyz/xyz/ahs/zhahd/fastboot rom
do like this
D:/fasboot rom
32 bit, use MiFlash beta
Tyuzva said:
32 bit, use MiFlash beta
Click to expand...
Click to collapse
It working well with windows 10 64bit without any error
Unlike old version show error
andersonaragao said:
Your Windows is 32Bits? If yes, use latest MiFlash tool. And check if file folder has no spaces like this C:\Users\Name\Desktop\Redmi Note\
If has space, remove all spaces. Put ROM in C:\ROM folder for example...
Click to expand...
Click to collapse
android_smater said:
use new version of mi flash tool
http://en.miui.com/thread-281979-1-1.html (i am using it)
and fastboot edl
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
and ya plz do not make log dict.
e.g D:/xyz/xyz/ahs/zhahd/fastboot rom
do like this
D:/fasboot rom
Click to expand...
Click to collapse
Thanks guys... My problem is solved.
Da_SilentKnight said:
Thanks guys... My problem is solved. ?
Click to expand...
Click to collapse
are you asking or telling
Can I Unlock Bootloader and Install TWRP (ZCX~TWRP) On Stable ROM Kenzo 32GB v8.0.6. I've Obtained Permission and downloaded the required files ( ZCX TWRP ,Mi flash and Xiaomi drivers ) Please answer the questions below
1.Can I Unlock Bootloader on Stable ROM ?
2.Unlocking bootloader means I will loose all data right?
3.can I directly flash ZCX TWRP after unlocking bootloader ?
I couldnt unlock it on stable, but no harm if you try
Unlocking doesnt mean you will lose data, you lose nothing
You can flash after unlockibg bootloader.
And you can unlock it as many times you need (it gets locked if you flash MIUI again or if you switch MIUI android version..
redminote3 said:
I couldnt unlock it on stable, but no harm if you try
Unlocking doesnt mean you will lose data, you lose nothing
You can flash after unlockibg bootloader.
And you can unlock it as many times you need (it gets locked if you flash MIUI again or if you switch MIUI android version..
Click to expand...
Click to collapse
I want to install TWRP and if I [ Can I ] flash MIUI developer ROM from TWRP ( full rom) the bootloader will be locked again
redminote3 said:
I couldnt unlock it on stable, but no harm if you try
Unlocking doesnt mean you will lose data, you lose nothing
You can flash after unlockibg bootloader.
And you can unlock it as many times you need (it gets locked if you flash MIUI again or if you switch MIUI android version..
Click to expand...
Click to collapse
Thanks for your reply
Sampath521 said:
Can I Unlock Bootloader and Install TWRP (ZCX~TWRP) On Stable ROM Kenzo 32GB v8.0.6. I've Obtained Permission and downloaded the required files ( ZCX TWRP ,Mi flash and Xiaomi drivers ) Please answer the questions below
1.Can I Unlock Bootloader on Stable ROM ?
2.Unlocking bootloader means I will loose all data right?
3.can I directly flash ZCX TWRP after unlocking bootloader ?
Click to expand...
Click to collapse
1. try it, somebody able to unlock at stable rom while i can't do it with stable rom. moved to dev rom, and unlock successfully
2. nope, your data will remain untouch
3. yes...dont forget to reboot directly to twrp afterward to disable dm-verity.
abihary said:
1. try it, somebody able to unlock at stable rom while i can't do it with stable rom. moved to dev rom, and unlock successfully
2. nope, your data will remain untouch
3. yes...dont forget to reboot directly to twrp afterward to disable dm-verity.
Click to expand...
Click to collapse
How did you move to Developer ROM my purpose for unlocking bootloader is to move into developer ROM please please tell me how to Move into developer ROM please???[emoji122] [emoji122]
Sampath521 said:
How did you move to Developer ROM my purpose for unlocking bootloader is to move into developer ROM please please tell me how to Move into developer ROM please[emoji122] [emoji122]
Click to expand...
Click to collapse
if only move to developer ROM, you don't need to unlock first. you can directly move to dev rom using miflash.
all you need available here.
miflash --> MIUI ROM Flashing Tool (Size: 31MB)
fastboot ROM --> Redmi Note 3 Qualcomm Latest Global Developer Version Fastboot File Download
abihary said:
if only move to developer ROM, you don't need to unlock first. you can directly move to dev rom using miflash.
all you need available here.
miflash --> MIUI ROM Flashing Tool (Size: 31MB)
fastboot ROM --> Redmi Note 3 Qualcomm Latest Global Developer Version Fastboot File Download
Click to expand...
Click to collapse
If I run mi flash.msi it opens Firefox and I can't get drivers for redmi note 3 please tell me the links and how to open MSI files
Sampath521 said:
If I run mi flash.msi it opens Firefox and I can't get drivers for redmi note 3 please tell me the links and how to open MSI files
Click to expand...
Click to collapse
*.msi is installer app file for windows. it should act as *.exe file. not really understand why it open firefox.
drivers for device,easiest way is install mi pc suite in your pc. googling it and you'll easily found it
abihary said:
*.msi is installer app file for windows. it should act as *.exe file. not really understand why it open firefox.
drivers for device,easiest way is install mi pc suite in your pc. googling it and you'll easily found it
Click to expand...
Click to collapse
I can't find it I found my but not Qualcomm Snapdragon please give me a link
Sampath521 said:
I can't find it I found my but not Qualcomm Snapdragon please give me a link
Click to expand...
Click to collapse
It's in the same link that @abihary has mentioned http://en.miui.com/a-234.html
I have attached a screenshot here...
I managed to unlock BL yesterday on 12 years old 32bit laptop with XP
I could only enter fastboot mode, so I installed old MiFlash;
http://bigota.d.miui.com/tools/MiPhone20151028.exe
Then I selected Drivers in that file to get ADB interface bootloader working, then I used MiUnlock and it went success
i didnt have my computer with 64bit win10 at hand where I have everything working tip top, so I tried that and it worked...maybe it can help someone too
Denis:) said:
I managed to unlock BL yesterday on 12 years old 32bit laptop with XP
I could only enter fastboot mode, so I installed old MiFlash;
http://bigota.d.miui.com/tools/MiPhone20151028.exe
Then I selected Drivers in that file to get ADB interface bootloader working, then I used MiUnlock and it went success
i didnt have my computer with 64bit win10 at hand where I have everything working tip top, so I tried that and it worked...maybe it can help someone too
Click to expand...
Click to collapse
you can use miflash 20160830 for 32 bit pc/laptop. i already try it using both 32 & 64 bit laptop
abihary said:
you can use miflash 20160830 for 32 bit pc/laptop. i already try it using both 32 & 64 bit laptop
Click to expand...
Click to collapse
It doesnt work on WinXP, but it works on 32bit Win7+
Hi guys,
first of all: I am an idiot
I was using an old nightly from CM 13-kenzo and decided to do some preparation to finally migrate to Lineage without data loss.
So I wanted to go to CM14.1 before flashing the experimental Lineage and the nightly.
What did I flash with TWRP?
1.) ROM: cm-14.1-20161225-NIGHTLY-kenzo.zip
2.) GAPPS 7.1 ARM64 micro
3.) Firmware: CM14.1-firmware_20161205.zip
I think I should have flashed the firmware first, moreover, I didn't wipe caches.
What's happening now?
Recovery mode does not work (the display just flash for half a second)
Booting does not work (ofc )
Fastboot mode still works.
How can I fix this nice problem with Cyanogenmod?
Any help is much appreciated.
Bro,I also faced this problem. Just go to guides section and follow the guide"install zcx twrp without unlocking bootlader" one. And flash by that method twrp and you will get it all back.
I have also faced problem same you are facing and solved it!!!
Btw. which recovery you used while installing this build?
ATG Droid said:
Btw. which recovery you used while installing this build?
Click to expand...
Click to collapse
Your bootloader is locked
Snooze4 said:
Hi guys,
first of all: I am an idiot
I was using an old nightly from CM 13-kenzo and decided to do some preparation to finally migrate to Lineage without data loss.
So I wanted to go to CM14.1 before flashing the experimental Lineage and the nightly.
What did I flash with TWRP?
1.) ROM: cm-14.1-20161225-NIGHTLY-kenzo.zip
2.) GAPPS 7.1 ARM64 micro
3.) Firmware: CM14.1-firmware_20161205.zip
I think I should have flashed the firmware first, moreover, I didn't wipe caches.
What's happening now?
Recovery mode does not work (the display just flash for half a second)
Booting does not work (ofc )
Fastboot mode still works.
How can I fix this nice problem with Cyanogenmod?
Any help is much appreciated.
Click to expand...
Click to collapse
. Your bootloader is lock, if you still can get to fastboot, then enter edl mode and use miflash to unlock yourboot loader again
Thx. Does Miflash work on a chromebook?
Mrxyzl said:
. Your bootloader is lock, if you still can get to fastboot, then enter edl mode and use miflash to unlock yourboot loader again
Click to expand...
Click to collapse
Do you mean the MiFlash Unlock tool? That doesn't work.
It's saying "Your device isn't supported by Mi Unlock" Go to .../unlock to apply for Mi Unlock support.
If you mean XiaomiMiFlash tool, what exactly do I have to flash?
Snooze4 said:
Do you mean the MiFlash Unlock tool? That doesn't work.
It's saying "Your device isn't supported by Mi Unlock" Go to .../unlock to apply for Mi Unlock support.
If you mean XiaomiMiFlash tool, what exactly do I have to flash?
Click to expand...
Click to collapse
Yes, I mean Miflash tool. You need to folow this guide
http://en.miui.com/thread-235865-1-1.html
And remember you will lost all data in internal memory, you will get back to MIUI with that guide. Then try to unlock your bootloader officially or unofficially again.
Or if you woud like to take risk then you can try this way https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778 without data lost
Mrxyzl said:
Yes, I mean Miflash tool. You need to folow this guide
http://en.miui.com/thread-235865-1-1.html
And remember you will lost all data in internal memory, you will get back to MIUI with that guide. Then try to unlock your bootloader officially or unofficially again.
Or if you woud like to take risk then you can try this way https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778 without data lost
Click to expand...
Click to collapse
Regarding your 2nd link:
now bring your phone in action and turn on oem unlock from developer optipn(tap miui version 7 time and find developer option in additional option)
sign out of your mi account
Click to expand...
Click to collapse
That would be the impossible part. So I guess I've to work with the first link. Thanks.
So if you damaged the recovery and your bootloader is locked theres no way to rescue this phone without a xiaomi shop but good luck
Okay problem solved. I used this guide https://forum.xda-developers.com/redmi-note-3/how-to/kate-guide-install-lineage-os-locked-t3546154 and it worked like a charm.
Thread can be closed.
I have a RedmI Note 3 (kenzo) running Lineage OS 14.1
The RAM usage reports around 150MB of use only and there is no free RAM. So I think there is a problem with my phone and I decide to flash everything to start again.
I found a compatible kernel and flashed that new kernel and I got bootloop.
I read that if I flash the ROM again, the kernel will be replaced by the default one so I went to do that with TWRP.
Went to TWRP to flash my ROM and got error 7.
Read a bit more and I read that somethimes very old TWRP will show that message for new ROM.
Indeed, my TWRP was quite old.
Followed steps to flash my TWRP recovery to newer version in TWRP.
Now my TWRP recovery can't even work.
Try to flash ROM with ADB, but I forgot to enable debugging before bootloop.
Is there a way I can fix it?
I don't need the things on my phone.
I just want it to work again.
Thank you for reading and provide me with guidance to fix my phone.
Trying to flash MIUI ROM using MiFlash. Hope it works. Then I can work my way back to Lineage OS.
flash the miui rom using miflash by going into the edl mode from fastboot.
Androbots said:
flash the miui rom using miflash by going into the edl mode from fastboot.
Click to expand...
Click to collapse
Thank you. Done that and still bootloop. Now bootloader is locked too. :crying:
Pyree said:
Thank you. Done that and still bootloop. Now bootloader is locked too. :crying:
Click to expand...
Click to collapse
I think then you should unlock via unofficial method
Androbots said:
I think then you should unlock via unofficial method
Click to expand...
Click to collapse
I will do that after some sleep.
I have another thing to worry about. The charge light is not on and my phone won't shut down. It can only bootloop or in fastboot. I put it on fastboot now. Still don't know how to shut it down or not sure if it is charging because there is no charging light.
I followed this:
https://forum.xda-developers.com/redmi-note-3/how-to/fix-bootloop-redmi-note-3-recovery-edl-t3521297
Flashed it, MiFlash says operation was successful but still won't boot up normally.
Now I don't have to worry about running out of battery because it boots to logo and turns off to nothing.
Pyree said:
Thank you. Done that and still bootloop. Now bootloader is locked too. :crying:
Click to expand...
Click to collapse
If u already unlock officially
Just unlock it again with mi unlock
I think ur bootloader got relock
Androbots said:
I think then you should unlock via unofficial method
Click to expand...
Click to collapse
Yoodaddy16 said:
If u already unlock officially
Just unlock it again with mi unlock
I think ur bootloader got relock
Click to expand...
Click to collapse
I followed the guide here:
https://forum.xda-developers.com/redmi-note-3/how-to/fix-bootloop-redmi-note-3-recovery-edl-t3521297
I managed to enter EDL mode because I have a red light flashing. But after I flash it using normal USB data cable, MIUI ROM will bootloop. Anyway, I got myself an engineering cable and flash it, MIUI boot successfully and so I proceed to flash Lineage OS. Everything is fine now.
Hello, I'm having trouble restoring my Redmi note 9s to the stock firmware, basically I installed a custom rom but I want to revert back to stock since it has annoying problems and I'm fed up dealing with them.
I tried downloading a stock firmware and installing it with official Xiaomi tools but I just can't install them for my life, even got a bootloop, thought bricked the phone and that scared me lol. (it failed to install the stock firmware halfway)
My problem relies on the official tool not working and the drivers not working, the tool detected my phone after troubleshooting for like 4 hours searching a driver and trying all the Xiaomi flash tool versions I found, but it just won't install the official firmware, always giving some error.
If anyone here is kind enough to maybe direct me to a guide that works or just tell me what worked for them that would be appreciated, I just want to finally install Global firmware on my phone.
Thanks!
Check here that everything is correct.
Post the Miflash log, miflash log file.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
If it's showing timeout error you may try miflash 2018 version. If it bootloop after flashing try miui 14 stock rom.
NOSS8 said:
Check here that everything is correct.
Post the Miflash log, miflash log file.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
Okay, just so you know, I installed a miui custom rom from here and have been running that since, so I will need to back up my phone, install miflash and try to finally get back into the stock rom.
When I'm done with that I'll try installing the stock firmware and post it to you
Muhammad Juman said:
If it's showing timeout error you may try miflash 2018 version. If it bootloop after flashing try miui 14 stock rom.
Click to expand...
Click to collapse
The last time I tried it was the miui 13 but it was not a timeout error, it was weird, I think it detected my phone and all that but when it started installing, it gave out an error when it was maybe half way and hung, luckily I have a custom recovery so I realized I didn't brick it and just installed a custom miui 13 rom from here
Btw I'm not sure if there's miui 14 for the redmi 9s (thats a official stock firmware), all the sites I get to are sketchy lmao
dekannomad said:
dekannomad said:
The last time I tried it was the miui 13 but it was not a timeout error, it was weird, I think it detected my phone and all that but when it started installing, it gave out an error when it was maybe half way and hung, luckily I have a custom recovery so I realized I didn't brick it and just installed a custom miui 13 rom from here
Btw I'm not sure if there's miui 14 for the redmi 9s (thats a official stock firmware), all the sites I get to are sketchy lmao
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Try batch flashing via fastboot. Paste adb and fastboot.exe in image folder then click on flash_all.bat
MIUI 14 is out for global I'm using it. I also faced bootloop while flashing from cusrom to stock. Then i flashed all miui 11 versions it was still bootloop then flashed MIUI 14 it booted. Currently I'm on MIUI 14 SJWMIXM
Muhammad Juman said:
Try batch flashing via fastboot. Paste adb and fastboot.exe in image folder then click on flash_all.bat
MIUI 14 is out for global I'm using it. I also faced bootloop while flashing from cusrom to stock. Then i flashed all miui 11 versions it was still bootloop then flashed MIUI 14 it booted. Currently I'm on MIUI 14 SJWMIXM
Click to expand...
Click to collapse
Could you explain more how to batch flash or link a guide please? I know how to follow guides and all that but I don't know what batch flashing is
dekannomad said:
Could you explain more how to batch flash or link a guide please? I know how to follow guides and all that but I don't know what batch flashing is
Click to expand...
Click to collapse
Here is guide
NOSS8 said:
Check here that everything is correct.
Post the Miflash log, miflash log file.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
So I was following what the guide said and when I click drivers it just crashes and leaves this log, I read it but it doesn't seem that helpful lol
dekannomad said:
So I was following what the guide said and when I click drivers it just crashes and leaves this log, I read it but it doesn't seem that helpful lol
Click to expand...
Click to collapse
Try that:
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
NOSS8 said:
Try that:
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
So I did that but it opened a cmd and closed really fast, I don't think it did anything at all to be honest, Im going to reboot see what happened
dekannomad said:
So I did that but it opened a cmd and closed really fast, I don't think it did anything at all to be honest, Im going to reboot see what happened
Click to expand...
Click to collapse
What OS are you using?
NOSS8 said:
Try that:
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
Damn it says the system has been destroyed, so now Im back to the situation I was in, I only have my custom recovery and fastboot
NOSS8 said:
What OS are you using?
Click to expand...
Click to collapse
Win 10, a few updates missing but basically up to date.
If my pc is the problem I have a laptop, which I never connect my phone to, that I can try on. It's on win 10 too but I haven't updated in a while since I don't use it often
Device manager/view/show hidden devices.
Do you have this?
NOSS8 said:
Device manager/view/show hidden devices.
Do you have this?
View attachment 5901529View attachment 5901531
Click to expand...
Click to collapse
This is what I have, I'm even using the original cable that my phone came with, which is brand new since I don't use it to charge it in everyday use.
One is unplugged, one is with it in fastboot mode
On this image, you have selected show hidden devices?
NOSS8 said:
On this image, you have selected show hidden devices?
Click to expand...
Click to collapse
Yes
Download and install ADB driver
Xiaomi Redmi Note 9S USB Driver for Windows
Download the latest Xiaomi Redmi Note 9S Driver for Windows Computer. You can use the latest Xiaomi Driver to connect the Xiaomi Device to the Computer.
xiaomidriver.com
NOSS8 said:
Download and install ADB driver
Xiaomi Redmi Note 9S USB Driver for Windows
Download the latest Xiaomi Redmi Note 9S Driver for Windows Computer. You can use the latest Xiaomi Driver to connect the Xiaomi Device to the Computer.
xiaomidriver.com
Click to expand...
Click to collapse
Okay I did that, I'm going to restart my pc. I should have known I was missing something. Should I try to install the firmware again?