FRP - Google Factory Reset Protection Bypass - As of November 2016? - Android Q&A, Help & Troubleshooting

I haven't seen anything concerning FRP around the site for the past couple months, I was wondering if anything new has popped up.
I've tried all the older methods, which have all been shut down by the latest update, and I cant root or flash a custom rom now because my bootloader is locked.
I'm just looking for anything that could help so I don't have to wait for the next couple days for my phone again..
Thanks in advance!

There is no universal method. It all depends on the update, phone, and carrier that it's from.

FRP Bypass methods not working on SM-T377W
I have recently purchased a second hand Samsung Galaxy Tab E (SM-T377W) from kijiji in Canada, but, to my dismay the FRP has been tripped. I have tried to follow ashyx and rootJunkie but even with an otg cable I am not able to access the settings/browser.
I have searched everywhere (I can think of) but am unable to find a stock firmware. any assistance would be appreciated.
Device:
Name: Samsung Galaxy Tab E
Model: SM-T377W
F/W: MMB29K.T377WVLU2API2 (gtesltebmc)
Country: Canada
I'm not sure what other info is useful, so I will reply as prompted.
Thanks in advance

Me too
Me too bud, the Sm-377w is locked down tight. Have tried everything. EMail me [email protected] if you have any answers

Related

[Q] Reooting and flashing

Hi there.
Total newbie when it comes to this and abit confused as there are so many different instructions on how to root, flash and unlock phones - to the point it got me growling at the laptop...
Anyhow I have a Samsung Galaxy 2 GT9100 that is/was locked "Three". I think I have managed to root it as I am able to run Galaxy 2 SIM Unlock - but alas it doesn't seemed to find a SIM unlock code.
I'm hoping someone can give me clear guidance on unlocking the handset (so I can use my giffgaff (o2) SIM in it), install a stock Samsung Galaxy 2 ROM (Not fussed about customisation) and finally suggest a Kernel that is secure and will get rid of the yellow triangle.
As you can appreciate after a whole day at "trying" yesterday I would appreciate some clear help instead of trawling 1001 youtube videos :laugh:
Leeds1975 said:
Hi there.
Total newbie when it comes to this and abit confused as there are so many different instructions on how to root, flash and unlock phones - to the point it got me growling at the laptop...
Anyhow I have a Samsung Galaxy 2 GT9100 that is/was locked "Three". I think I have managed to root it as I am able to run Galaxy 2 SIM Unlock - but alas it doesn't seemed to find a SIM unlock code.
I'm hoping someone can give me clear guidance on unlocking the handset (so I can use my giffgaff (o2) SIM in it), install a stock Samsung Galaxy 2 ROM (Not fussed about customisation) and finally suggest a Kernel that is secure and will get rid of the yellow triangle.
As you can appreciate after a whole day at "trying" yesterday I would appreciate some clear help instead of trawling 1001 youtube videos :laugh:
Click to expand...
Click to collapse
I've managed to get I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar on - I'm not sure if that's the right one for the UK but its the only Generic one I can find and all seems fine, however the GPS is shockingly bad. Any ideas?
Thanks

FRP lock Galaxy S5 sm-g900v android 5.0 OG5

Hello everyone,
I have done a facory reset to my phone and now i'm locked with the samsung account verification, i've tried everything to bypass it but nothing worked, i have even tried to flash my phone and downgrade it (didn't work because the bootloader is locked) but nothing. Please can anyone help me i'm really stuck!
I have a sm-g900v android 5.0 baseband version g900vvru2bog5.
There aren't any methods to bypass the Samsung account lock without a tool like the z3x box that I've seen.
I have one, but I do not have the other software needed for remote service yet.
Thank you very much for your fast and rigorous reply. I'm really disappointed though So i guess i need to take the phone to an expert.
es0tericcha0s said:
There aren't any methods to bypass the Samsung account lock without a tool like the z3x box that I've seen.
I have one, but I do not have the other software needed for remote service yet.
Click to expand...
Click to collapse
You can also order the remote service via eBay. Not that many shops have the tool/tools needed to bypass.
Do you recommend someone cause in case i gave my imei number i'm in danger of getting reported as a robber? (i've just read it in a forum somewhere on the net)
es0tericcha0s said:
You can also order the remote service via eBay. Not that many shops have the tool/tools needed to bypass.
Click to expand...
Click to collapse

Chinese Verizon s6e+(sm-g928v) with different firmware(of (sm-g928f))?

I know this phone is very old at this point. But my mom has been using this Verizon s6e+ that was bought from china (not from a official retail store) and it works on other operators! In fact, the phone itself doesn't recognize that it is a Verizon model. The about phone section says that the model number is SM-G928F, so I believed it had a ported firmware(!) and didn't give much thought into it. I didn't know Verizon phones are extra secured until 2 days ago. She upgraded to a s9+ and so I started searching for roms for this phone. I found a TWRP for the sm-928f, and tried to flash it with Odin, but that's when I git confused - the phone still has a locked bootloader. In Odin Download mode, it even says the phone model is SM-G928V.
As far as my understanding goes, it means that the Chinese folks have managed to bypass the Verizon lock, kept the bootloader intact, and installed a unlocked international firmware?
I came here to find someone more experienced on these to work on this case, i can confirm the following:
- Factory reset from phone settings reverts the phone to a new g928f; haven't tried wiping from recovery.
- most of Samsung/Verizon bloats are uninstallable just normally, but they appear again after a factory reset.
- the phone is stuck at Android 6.0.1 with TouchWiz and tapping software update from settings does nothing
Any devs interested in this case? Can this device potentially give us the solution to rooting Verizon phones?
Screenshots and photos: gdrive/folderview?id=1CaGu0NWwyz4AeR_XecaxlMTmtGVfX6Q0

Samsung S5 Neo FRP Locked

Hello world,
I've just bought a second hand samsung S5 Neo (SM-G903F) and I've installed LineageOS on it, it worked very well... on the first boot. But when I did reboot, I've got the red message : Custom Binary blocked by FRP lock.
I read all the threads about this, and it seems like I must flash a stock ROM on the phone to resolve the problem, but I've tried several ROM with no success.
How can I find the specific ROM needed by the phone, or FRP unlock by another way ?
Any help appreciated...
This method is not for only steeled mobiles if you forget your password and google account you need to recover it then this will help you to improve your mobile phone.
Finally, I found the right stock ROM and ODIN did the job. Phone is unbricked. :good:

an newbie need your advice and help!

hi all,
I have Samsung SM-G935W8 (in Canada), bought used from someone. recently, try to play with android, and realized the phone PDA was G935UUEU4BRD1, and model was SM-G935U which is different from the model that showing on back cover. think the guy flashed a different rom for this phone.
couple days ago, I did hard factory reset for no reason, and get google account locked. then search online and learning how to fix it. seems like need to flash combination rom --> use tool bypass frp --> flash official rom to solve this issues.
i downloaded many combination firmware and all failed on odin flash. until i use one that allowed me to flash and success to open the phone as Factory Binary. But, I noticed the phone model changed to SM-G935A, which is AT&T firmware. the android version is 6.0.1, when I try to run program to do FRP bypass, no luck, think that because I can't turn on OEM- Unlock option(can't find it on developer option tough)? or bootloader locked?
now, I can only flash official rom that from AT&T, and android 8 that I can find it. if the phone can be fixed FRP issues, model change to G935A is fine, I dont care that model, I dont use the phone for call, only for wifi and camera. and maybe later can play flash to other model of ROM. not sure if possible.
current, the working combination rom I flashed is PDA : G935UUCUBATA1
ADB FRP to bypass FRP (not working)
and flashed to AT&T rom PDA: G935AUCUBCTB1_G935AATTBCTB1_8.0.0
FRP still not bypassed, and stuck on google account validation screen. any advice how and what tools can bypass FRP for this phone now model is SM-G935A? thanks in advance!

Categories

Resources