Ok in the galaxy s2. If you go to settings, display, then at the bottom, you have horizontal calibration and gyro sensor calibration.
If you choose horizontal calibration you get a little test thing with the dot in the middle and it moves as you tilt the device.
When I go to gyro sensor calibration the dot just stays in the middle and does not move. Is this normal ?
Can someone try the above please
yep i tried this before, same here, but i think it's normal
If you look two different calibrations .
jje
I know, but shouldn't the dot move when you tilt the device. I thought thats what the gyro does
Do it while you are in the car (as a passenger), and see if that move when the car accelerates or slows down
Why would one calibration act the same as another .
jje
I am having the same problem the gyro calibration was working till i click on calibrate as soon as i clicked it i no longer see the ball moving :/ tried wiping and everything nothing worked.
Mine doesn't move either.
I could of sworn mine was moving last time I checked! Very strange..
I cant get mine to move either.
Maybe this might help.
http://en.wikipedia.org/wiki/Gyroscope
the gyro problem is annoying .. every app just turn into landscape mode :/
hope someone fix it fast ;/
sorrowuk said:
Ok in the galaxy s2. If you go to settings, display, then at the bottom, you have horizontal calibration and gyro sensor calibration.
If you choose horizontal calibration you get a little test thing with the dot in the middle and it moves as you tilt the device.
When I go to gyro sensor calibration the dot just stays in the middle and does not move. Is this normal ?
Can someone try the above please
Click to expand...
Click to collapse
Before I root my Samsung, can you tell me what rom you have installed or what you did last?
Thx
Morichio said:
Before I root my Samsung, can you tell me what rom you have installed or what you did last?
Thx
Click to expand...
Click to collapse
Lite'ning rom , it was working untill i clicked on calibrate after clicking it it got stuck :/ well that me i don't know about the OP.
I have the same problem (indications for gyro callibration) but also a magnetic sensor problem (see this http://forum.xda-developers.com/showthread.php?t=1111355 threat)
I used an app called sensor test / plot which shows problems with the magnetic sensor and orientation.
Anyone having the same problem?
Try an App called GPS status, it displays the output of all the GS2s sensors on one screen, including satellites, compass, gyro and accelerometer, at least you can reassure yourselves that the various sensors are actually working
erikcornelisse said:
I have the same problem (indications for gyro callibration) but also a magnetic sensor problem (see this http://forum.xda-developers.com/showthread.php?t=1111355 threat)
I used an app called sensor test / plot which shows problems with the magnetic sensor and orientation.
Anyone having the same problem?
Click to expand...
Click to collapse
All the numbers move for me using the sensor test/plot app.
in sensor test everything is working but the phone just stay in landscape mode .. thats the problem that i have.
You can try *#0*# on your dialler and then use the Sensor test and check if everything is all right.
tested on *#0*#it says its working fine as well .. :/
Recently my magnetic sensor did not work. Yesterday suddenly it came to life exept I don't trust it.
Just to check if my sensors are OK I would like to compare some data. I use *#0*# and the SENSOR
My readings are (when on table):
ACCELEROMETER Sensor Raw Data
x:-10/10 y:-20/-40 z:3030/3060
Gyroscope Sensor
Y:-0.01/-1.00 P:0.01/0.80 R:0.01/0.90
Gyro self test OK, Graph shows normal plot with rotation around all axes)
Magnetic Sensor
Magnetic: x:-45 y:-600 z:1086 (values change with orientation but stay around the same range, exept for the z value, it stays at 1086.48 contantly)
Azimuth: 176 (changes just +/-2 degr with rotation and +/- 20 degr with roll)
Pitch: 0,050 (changes normal with pitch)
Roll: 0,40 (changes normal with roll)
Little compass indicates South (red line towards you) and does not change with rotation (just +/- 20 degr with roll). It also says need for calibration and the number 0.
I know values will be different with everyone but should be around the same range. I have values (Accelerometer) in the 10 / 30 and 3000 range depending on de axis. Same with the Magnetic sensor 50 /600 and 1080 range.
As the magnetic z-axis value is stuck I expect a faulty sensor.
the test is all good to me but the image test it failed to move from landscape to normal. hope someone can help :/
So I've used the search bar and google
there are 4 circles at top
1. Ambient Light sensor
2. LED notification lights
3. ???
4. Proximity Sensor
so whats in between the earpiece and proximity sensor
also why dont apps recognize the ALS? I've used android sensor box, androsensors and my android sensors but still nothing. Though auto brightness works. I know, I move my finger over it and the screen gets dim
z50j said:
So I've used the search bar and google
there are 4 circles at top
1. Ambient Light sensor
2. LED notification lights
3. ???
4. Proximity Sensor
so whats in between the earpiece and proximity sensor
also why dont apps recognize the ALS? I've used android sensor box, androsensors and my android sensors but still nothing. Though auto brightness works. I know, I move my finger over it and the screen gets dim
Click to expand...
Click to collapse
The last 2 sensors are for proximity i guess, cause even on my mini pro i have 2 circles for proximity. In the stock rom, it is never detected, its on by default. In roms like cm10, CM10.1 etc. you can choose whether to use it or not, change the different levels etc.
Well in mini pro its
Led, ambient sensor, camera, proximity.
Tbh, I think I have seen two dots instead of one for sensor. (Really hard to see)
Regards
N
mnishamk said:
Well in mini pro its
Led, ambient sensor, camera, proximity.
Tbh, I think I have seen two dots instead of one for sensor. (Really hard to see)
Regards
N
Click to expand...
Click to collapse
Yep there are two sensors for proximity.
why are there 2 sensors for proximity? using the sensor apps I've noticed that only that the right most works the 3rd one doesnt really do anything when i cover it. but it works so I'm fine with that
but how come the apps dont detect the ambient light sensor? that too is obviously working because the screen dims when i hover over it
Try using the service menu and see if it works there
Regards
N
mnishamk said:
Try using the service menu and see if it works there
Regards
N
Click to expand...
Click to collapse
I did, it doesnt
I have the above rooted phone with official rom Android 5.0 and I would like to know if exists a way to disable magnet reed switch to turn off flip cover function that locks/unlocks the phone that display a clock for some seconds after screen lock. I tried XDA magnetoff, flip cover, auto screen on/off, sensor disabler ecc. without success. Is there a way to disable magnet cover lock screen without replace it with a new one without magnetic component?
Thanks
Hi, I haven't been able to find any information on this:
I have the clear view stand case, but I would like the screen info to flip when I flip the phone.
For example... Listening to music using the headphone jack, if you set the phone on a stand, you are forced to have the phone standing upside down..
Without the case, I have been able to accomplish this via some tasker profiles and another app. But I think it just might be impossible to control this.
I found the samsung intent that can be used to track if the case is closed, and using tasker I can differentiate screen off vs screen off + case closed.
Also you can use counters and such to try to determine when the screen is "on" (with the case closed) . but even though I think I have those situations figured out, I don't think you can force that screen to rotate to reverse portrait.
Has anyone here tried such things?
Yes I have done that before on older phones using set orientation app from the App Store. However it does not work for reverse portrait on the S8. I am in the same situation and I just use my cup holder but again I want to put the phone upside down in portrait and have the screen change appropriately. That app work fine on all other phones I have had but it does not work on the Galaxy S8
Hi,
The fingerprint animation while screen is locked appears every time except when the phone is vertically upside down or when the phones screen is fully covered from top to the level of power button(I guess some proximity sensor is used to make this happen).
But exactly where is this sensor??
I am not able to find an app which connects with the proximity sensor of our phone. Any app?
Just curious