Hi guys,
Firstable sorry about my English.
i have le max 2. it came to me rooted and twrp recovery system.
there was a problem with calling and i load this one. LeECO_Le2_X820_MAX_5.8.018S_REV2_CUOCO92.
but there are many Chinese app and keyboard ect.
i think i found another room with no Chinese app.
now i want to load this rom but when i try to recovery by volume up and pover bottom combo,
its always shows me eui recovery screen.
i tryed many time to setup twrp but no happend.
i tryed to update by eui recovery screen but says no apk
any one help me?
advance thanks
You have to install twrp, you Lost it
Hi venezolano69,
thanks for your answear.
i tryed to install that many times. but it doesnt come on recovery screen.
i dont know whats going on
Did you solve this after?
I received my Le Max 2 yesterday....
I enabled usb debugging, unlocked the bootloader and then flashed the twrp recovery image which it says is successful but when I then exit and press volume up with the power key to enter recover I get the eui recovery screen....
That is strange.
I never had problems with this. Just follow the steps men.
Found the problem.
I was rebooting normally after flashing TWRP and then turning back off and then into recovery, instead of rebooting straight into recovery mode from fastboot. Once your are in TWRP in gives you the option to permanently disable the stock recovery system.
HTH
Related
I have a Lenovo A390 and I want to put a custom ROM that supports english and Google Play store app.
It is currently using some Chinese OS without google Play app, so not much I can do.
Current status: It is rooted but I can not access recovery mode.
I used:
1. Root - Framaroot with the Boromir exploit, worked fine initially. Then I used Rashr.
2. Install Recovery - Rashr let me install TWRP so I installed LenovoA390_recovery.img and tried to reboot to recovery mode. At first time it worked, and I saw the TWRP application screen and did a full backup of my Lenovo_A390. Then I tried to install a custom ROM and I chose the image file and started to flash it. It went very quick and I rebooted it. It started again but same operative system came up.
Once I restart the phone and try to go to recovery mode I see the old Lenovo logo or similar with a small text below that it is entering recovery mode, and then it goes to a black screen and nothing happens.
Now I can not access recovery mode anymore, then I hold volume up and power button, all I see after a few seconds is the Lenovo logotype, and nothing else happens afterwards. I have tried to install the recovery image again (using Rashr), but I have the same problem all the time. It installs the recovery.img but when I try to boot into recovery mode, it is not working. I also tried with CWM recovery image, but I get the same problem. Lenovo
The phone is still rooted (Rashr is working) but I can not access recovery mode.
How can I get the recovery mode to work again, so I can install a different ROM without Chinese operator branding?
Thank you!
Warcious
Guys, What can I do if my screen turns black every time I try to go to RECOVERY mode?
The phone works fine, but when I try to go to recovery it JUST GOES black and I need to power it up again. How can I fix the recovery?
I have tried installing TWRP over Rashr, and it installs well, but just can not go to recovery mode.
Also, when I try to go to FASTBOOT MODE by holding POWER + VOLUM UP buttons, I only go to FACTORY MODE all the time.
Why is this happening like this, and WHY can't I go to FASTBOOT MODE?
Is it the same ?!?
Hello everyone,
I have a problem with my leeco Le max 2 - 6gb/64gb (x820).
I installed the ROM EUi cuoco92 and I would like to install a new rom (lineageOS 7.1.2 for LeEco MAX2)
I installed a new recovery on the official site, I followed the steps (install adb, drivers, unlock the boot loader ok and install Twrp)
When I finish it is not going to start on the twrp at startup there's marked recovery then a black screen and it vibrates several times to finally start normally on the old ROM)
Trwp no loadind or booting same for recovery Eui ! :crying:
I responded to the manipulation several times, I do not know what to do
Thank you and your help :good:
You'd be better off installing cuocos recovery. I had trouble with flashing roms with official twrp. You can find the file on cuocos thread
Sent from my Le X820 using Tapatalk
it's good with twrp recovery cuocos...thank you very much
luisoman2000 said:
You'd be better off installing cuocos recovery. I had trouble with flashing roms with official twrp. You can find the file on cuocos thread
Sent from my Le X820 using Tapatalk
Click to expand...
Click to collapse
it's good thank you very much.
sorry for my english i'm french...
Installing twrp on me Max 2
Ok, not sure if this is your problem - when trying to install twrp, that the installation all goes through correctly, but when rebooting - twrp has not loaded.
I have had the same problem on two Le Max phones now. I originally found the solution on xda ( or another site ) but only just remembered it just now .....
The solution is - after the install of twrp has completed on the phone you will be left with a screen with an image of 3gears, Chinese writing and in English - you've entered Fastboot Mode etc... , you need to hold the lower ( smaller ) power button down to make it reboot
But Immediately as it starts to reboot release the power button and quickly push and HOLD the volume button top ( up ) , then quickly do the same with the power button. The phone will beep a couple of times, release the buttons and the phone will boot into twrp.
It appears that if you don't carry out this sequence then the original startup sequence restarts and wipes the new twrp install, meaning that you have to go through the whole twrp sequence again. ( I've done it so many times now i've got really fast .... )
Problem:
1.I had Resurrection Remix rom 7.1.2 installed with TWRP.
2. Tried to Install stock rom and stock recovery. Was able to install stock recovery but it was hanging in recovery. Could not move with volume buttons.
3. Then I tried flashing fastboot roms through miflashtool. Flashing was done successfully but nothing happens. It is now stuck on MI logo.
4. Mi logo only(No powered by android below or anything) It just restarts.
5. Cant go to recovery by any means tried everything.
6. Can only go to fastboot.
7. Adb does not detect device tried to install multiple times.
8. Cannot switch on Usb debuging since tablet wont boot even once.
9. I have no means to flash recovery as well.
Please help.
Have you found any solution
I am looking for a solution facing similar problem
I am looking for a solution facing a similar problem. Any help will be appreciated. I am able to reach fastboot and sun boot as well as recovery command successfully with twrp iso. but twrp is not loading after reboot and also trying to press vol up and power buttons.
chandidas said:
Have you found any solution
Click to expand...
Click to collapse
HI,
I inherited this phone. ( D6503 )
Fixed a few hardware problems, now looking at software improvements.
I have unlocked the bootloader , but for the life of me I cannot get a recovery on this phone??
I have previoiusly done flashing on nokia, motorola and Nexus, but I am having no luck with this sony
I am able to connect using ADB, and can get to fastboot, but it stops there.
Issuing '' fastboot boot twrp.img'' ( to try and boot temporarily to twrp ) gives me a blank screen.
issuing ''fastboot flash recovery twrp.img'' does the same.
I cannot get a bootloader screen at all, even using the key combinations.
I cannot boot any recovery at all.
Is there someone here who can put me out of my misery
I am not looking to perform anything fancy, I just want to flash the latest lineage to see how it performs
Many Thanks in advance.
pootler.
Anybody???
I have rooted the z2 by dropping down to 5.11, installed the twrp app, then flashed recommended version of twrpl
Then when I power off the phone, and press the power and volume down buttons, instead of booting into twrp after 7 or so seconds, it just reboots after abour 2-3 seconds???
Can anybody help?-------please
I have even tried rooting , then installing twrp by either 1) fastboot or 2) twrp app.
I then installed NDR utils, to reboot to recovery - it still reboots to main system??
HEEELLPP !
I also tried flashing TWRP with 1) fastboot and 2)the twrp app,
I then installed NDR utils ( i have root ) , and it still wont boot into recovery, just straight into system???
HEELLPP!!
Thread closed on request of OP @pootler
Hi Community,
I read some posts how to fix my Problem, but i cant go to a service Point.
So I was using the Evolution X for a long Time (Installed with TWRP 3.1.0).
And now i wanted to change to the Nusantara Project (Vanilla), I did a clean Flash, everything worked i could access the System.
Than i had problems installing Play Store, so i rebooted into Recovery via the System. But now im Stuck in the Loop.
Can i Somehow connect my Phone to the PC and Reset?
Can someone tell me if i Hard/soft bricked my phone ?
Just a little advice, would be really appreciated.
Thanks a lot
Go to TWRP, wipe system, cache, data and dalvik. Now flash nusantra and whichever GApps are recommended for it (if there are no recommendations then use OpenGApps, make sure the architecture is correct). Now wipe dalvik and restart. Sometimes, certain roms begin to bootloop if you boot into the rom first, then try to install gapps later.
If you still have issues, just reflash the stock rom.
I cant access the TWRP anymore, im just stuck on the Bootloader, no matter how i turn on The Phone (Volume Up + Power ON ), (Volume Down + Power), (All 3 Buttons)
Nothing works anymore i dont understand ....
Im searching the net but i cant go to fastboot or something else, its just keeps on rebooting ...
So it's bootlooping, but you cant access recovery?
When the screen turns off, press the key combo and it should go to recovery.
Your best bet is to take it to a service centre, but if that really isn't possible for you, then wait for its battery to drain completely, then when you plug in the charger, instead of turning the phone on, press the key combo to enter the recovery. From there, wipe and flash some other OS.
I've also heard that certain versions of TWRP don't support some roms, leading to a bootloop. In that case, you'll have to use orangefox recovery to flash the rom (orangefox is flashable via twrp)
Yes its Bootlooping.
When i turn it on, on the Left Corner "Recovery Mode" blinks for one second. Than the usual Text appears:
"Orange State
Your Device has been unlocked and cant be trusted
Your Device will boot in 5 Seconds".
So after a couple of seconds (around 10-20 sec)
It turns off and immediately on again. I Just can turn it OFF when i hold all 3 Buttons.
Than i try starting it with Volume up + Power / Volume down + Power, But i cant access Recovery or TWRP.
So i should wait til the battery gets low and try it again ?
Like i said, my custom Rom (Evolutionx) and TWRP just worked fine. I dont know man ...
Well since your bootloader is unlocked, try flashing the stock rom again. Look for a tutorial and follow it.
Hi I managed to unbrick my device with this guide, and im back on a stock rom
Unbrick
i ran following commands to get to my custom rom:
I run adb reboot bootloader,
add executed following commands.
(Pitch Black recovery 3.1)
- adb reboot bootloader
- fastboot flash recovery recovery.img
-fasboot reboot recovery
It just hang up and booted after a while into the normal system.
But im not able to get to the recovery menu ?
When I restart and hold Volume up + Power, i go in a loop and the phone keeps restarting over and over again.
what have i Fu**ed up ?
Do i need another recovery tool ?
sorry guys, i appreciate your help a lot tho !
EDIT: Is my bootloader unlocked ?
I can access via "adb reboot bootloader" the phone
and on the blackscreen on the phone it is written:
oppo verfiy pass
fastboot_unlock_verify ok
Update:
So i tried some Stuff and i got Red State. No Problem i Unbricked it once again and now im on Stock Android 10.
Now im Trying to enable the bootloader again.
I downloaded the In Depth Test_Realme_6.apk but i keep getting the Error that i should update the system.
So should i update the system ?
I cant find a CURRENT Tutorial to make this work, please help...
If you cant find a tutorial for your version, why not downgrade back to a previous one if possible.