Hi, as one of my friends phone was about to get stolen when we were out in town a few days ago, I wanted some tracking and anti-theft software on my GS2. I found out how the pre-installed software from Samsung works (go to http://www.samsungdive.com/DiveMain.do and register your phone, and then enable tracking under the phone's security settings). But it is a very poor anti-theft solution if you ask me, even thou it works just as well as any solution on the market. First of all, if GPS is disabled and you try to track your phone using the Samsung website, it will ask you "do you want to enable GPS?"..that's just plain stupid and I don't see why it can't force it to start. Second of all, if my phone got stolen I would expect it to get reset to factory settings at some point. In order to avoid this, the phone should ask for the same pincode it ask for when you enable/disable tracking. That way it should always be possible to find the phone if it ever got stolen. I figured it was a simple yet good idea and wanted to feature request it for Android, but I couldn't find any information on where you can do so. Do any of you guys know? Or do any of you developers talk to the Android developers or do they roam in a certain part of the XDA forum?
Kirsebaer said:
Hi, as one of my friends phone was about to get stolen when we were out in town a few days ago, I wanted some tracking and anti-theft software on my GS2. I found out how the pre-installed software from Samsung works (go to http://www.samsungdive.com/DiveMain.do and register your phone, and then enable tracking under the phone's security settings). But it is a very poor anti-theft solution if you ask me, even thou it works just as well as any solution on the market. First of all, if GPS is disabled and you try to track your phone using the Samsung website, it will ask you "do you want to enable GPS?"..that's just plain stupid and I don't see why it can't force it to start. Second of all, if my phone got stolen I would expect it to get reset to factory settings at some point. In order to avoid this, the phone should ask for the same pincode it ask for when you enable/disable tracking. That way it should always be possible to find the phone if it ever got stolen. I figured it was a simple yet good idea and wanted to feature request it for Android, but I couldn't find any information on where you can do so. Do any of you guys know? Or do any of you developers talk to the Android developers or do they roam in a certain part of the XDA forum?
Click to expand...
Click to collapse
Please try to contact Samsung/Google via the official contact/support email addresses first.
As they are using help desk systems, each email to those addresses become documented as a request or ticket and will be worked through in some way.
Every other contact (via personal network or a free/internet forum) is "in-official" and could lead into a loss of your input.
Good luck !
Kirsebaer said:
First of all, if GPS is disabled and you try to track your phone using the Samsung website, it will ask you "do you want to enable GPS?"..that's just plain stupid and I don't see why it can't force it to start
Click to expand...
Click to collapse
It doesn't on my phone. It remotely turns on GPS automatically with no prompt on the phone.
Hi ,
I just installed the GALAXYMOD from the forums of XDA by Ajajjohn. Unfortunately I m having a bit of trouble with it. It keeps crashing by saying Unfortunately system Ui is failer or something like that.
Anyone tried this??
Can u tell me how to rectify this.. its becoming really painful.
Can someone also recommed a totally bloat free modified samsung firmware where only the bare minimum required stuff is there.
thehatedone said:
Hi ,
I just installed the GALAXYMOD from the forums of XDA by Ajajjohn. Unfortunately I m having a bit of trouble with it. It keeps crashing by saying Unfortunately system Ui is failer or something like that.
Anyone tried this??
Can u tell me how to rectify this.. its becoming really painful.
Click to expand...
Click to collapse
Now my notification bar is also missing.. I dont know where or what i did wrong
Sorry to interrupt the dialogue you're having (with yourself ... trying to get your 10 posts so you can spam the development area?), but what is the "GALAXYMOD by Ajajjohn"?
Ohhh, finally found it.
http://forum.xda-developers.com/showthread.php?t=1482372
Some ROM based on leaked, buggy, unstable ... oh people get the point by now.
oinkylicious said:
Sorry to interrupt the dialogue you're having (with yourself ... trying to get your 10 posts so you can spam the development area?), but what is the "GALAXYMOD by Ajajjohn"?
Ohhh, finally found it.
http://forum.xda-developers.com/showthread.php?t=1482372
Some ROM based on leaked, buggy, unstable ... oh people get the point by now.
Click to expand...
Click to collapse
U may have a point there.. but then again with the multitude of Roms and 2.3.xxxxxx's which is the best one becomes a method of trial and error..
Or if u have tried and found a stable non buggly highly effective rom with the following requirements please recommend so that I can go for it.
1) Gmail High Usage - COntinous Sync
2) Whatapp
3) Gtalk
4) Some non hd games
5) A battery non drainer that can atleast last 18-20 hrs with continous email sync on and say about 20-30 mins on call
I dont need any hubs or location services..
Please do recommend
PS: Whether I finish ten posts or not.. the same questions would be asked there too.. It really does not matter to me whether its there or here as long as I get an answer to it
FYI: I was on stock till now - This is the first rom i tried. So u can term me as Ultimate NOOB
Hi all. I've been following XDA for a long time. But since i am more into the hardware i need some help with the software.
I ordered a Bedove I5 from Uredeal.com . And i am not sure if the chinese have put some code in it which make all the things that goes over the internet is send trought there servers.
Whenever i open a chat (whatsapp, fb messenger etc.) and send something. It has a time stamp of 6 hours later. And messages i receive have a normal time stamp. This also happens with multiplayer games like wordfeud. an active game says for 6 hours long that its 0 seconds ago i made a move. and after 6 hours its going to count. I even got an email from google that someone in china tried to login to my account but they blocked it. I want to use my mobile also for mobile banking but with this in my mind its just not save and i dont want to take the risk.
If i manage to make a back-up from my rom, can someone take a look at it and if possible fix it for me (clean up my rom)?
I thank the person(s) that are willing to help me in advanced.
If someone knows a link to a clean rom for my device. Feel free to post.
Edit: I couldnt find one by myself.
Sent from my I5 using xda app-developers app
IMO, its more likely a poorly written ROM than spying going on. Either way I'd steer away from Chinese imports. It's not worth it. Spend a bit more for a real phone.
Sent from my Galaxy Nexus using xda app-developers app
How can you comfirm that? It can be both ways. But since i use this phone people out of china try to get on my gmail acc. So by this i think your argument false.
And the quality of chinese phones are getting higher and higher. I have totally no negative points about the phone. Its a good product. It doesnt even freeze which i see at most smartphone models. Everything workes good as it should be. No wifi or connectivity problems.
Ill try to root it and make a backup so people can look at it. And confirm if its a bad rom or spying. My feeling says spying.
There are some apps on it with the title in chinese. Cant delete them without root and dont know if they contain system information or the information they send everyting to...
Sent from my I5 using xda app-developers app
Have you tried to do a factory reset?
-kinetix118
I managed to make a back-up with mtkdroidtools. The funny thing is. When i finished the back-up. I saw a function in mtkdroidtools named "remove china". I tried that button with the temp root. and it removed all the chinese apps that where in the root of the phone and that the time and everything else is ok now.
I cant place the link to the back-up since i got less then 10 posts. I can private message it to someone who can post the link to here.
- Suiding
QUICK RANT:
There are people with similar problems on Blackview's forum website, so I thought to add another unsolved google result to the mix. Apparently every thread and comment are approved my their moderators, even with the promise that each one is answered within a day, all of my thread requests and comments have been blocked. I assume this has to do with maintaining product confidence. At surface level all the issues seem minimal and the threads all have answers. Someone even stupidly asked If the phone would get the Oreo update, now their lone approved post in the rom section is the poster-child for post release support "hope". I guess I am stupid for buying this inaccessible paperweight.
MY PROBLEM:
No matter what option I select at the startup, the device stalls on the connect to wifi and check for update screen. No amount of updating or even suggested OTA upgrade will fix this especially given that OTA requires access to the options/settings screen that is only found post startup. I have basic experience flashing a droid III to make it compatible with different carriers. I don't have experience flashing newer phones or custom roms. Please don't put my thread in limbo, you are my only hope frontier superusers! :angel:
Edit/Update:
I figured out a work around based on a YouTube video I watched that explained that you need to access the settings menu to force stop the "startup wizard" process. I accessed it through using the contact/feedback page feature of the third-party custom emoji keyboard that comes stock on the Android. Perhaps I shouldn't detail anymore in case seeing how this is a hole in the Android nougat security. PM me for more details if you want.
TLDR; there is a stock app on these phones that allow you to bypass a bugged startup wizard and resume basic setup and function of the phone as long as it has not been synced with a previous Google account no flashing required.
I had no issues with the setup wizard, it just needed some time. (I skipped it on the first start to perform a OTA update before make any more settings. After this update everything works like it should.)
Same problem
I have the exact same issue. The installation wizard keeps on quiting. Drives me nuts too. I does not matter what I do and what options I choose, with or without sim, with or without wifi. It has something to do with the android version, more android telephones are affected. However on other phones (see YouTube) you can still access the normal menu and work around the issue. With the BV9000PRO this does not work.
Hi. I'm having the exact same problem on my bv9000 pro, but when I access the boot menu, it's in Chinese. Are the menu settings in the same order as in English? That way, I may be able toggle/turn off that setup wizard and be able to use the phone. Thanks.
This works for me
This worked on my phone: copied from a YouTube post:
Disable all the wi-fi connections in the radius of the Phone, skip the procedure for the SIM, at this point it will ask you if you want to continue without connections and yes, do not enter the name and surname to give the phone a name, accept the Google / Android agreements, at this point the phone will be activated, no update is necessary via OTA if you have the BV9000 PRO-F phone (full HD version). There are two versions of this PRO series phone, the BV9000 PRO (not full HD) and the BV9000 PRO-F (full HD). I hope this solution will work for you too. Let me know bye.
I had the same and trouble shooted through it all and the only issue I have left is finding a carrier for the USA and if or how to change parameters of Bv 9000 phone frequencies to work in the United States. Any advice from anybody in the world please send advice, Tony
BV 9000 PRO Screen Replacement
Space_Alien said:
I had the same and trouble shooted through it all and the only issue I have left is finding a carrier for the USA and if or how to change parameters of Bv 9000 phone frequencies to work in the United States. Any advice from anybody in the world please send advice, Tony
Click to expand...
Click to collapse
.
Hello everybody,
trust my message finds you well.
Sorry for posting this here, but i am not able to post a new thread and honestly i have been dealing with blackview sites and their admins with no luck , they dont answer your questions, neither do any support, nothing !
I have a blackview BV9000 pro, my screen broke up but is still working.
I bought a new screen and installed it but didn't work.'
'
After reading some forums, i understood that the new screens that are sell now are FHD+ and we need to upgrade our ROM so the new screen can work.
My questions are now :
1- where can i find this new rom that includes English and google play services.
2- if i install it, my old screen will still work?
3- this rom will let the new FHD+ screen to work?
thank you in advance.
Hi I know this is an old thread but I have issues with my second Blackview phone that is the BL6000 Pro.
To answer you: I have found several links to stock roms on the Blackview forum, they might even be interchangeable but I haven't tried.
I am currently seeking support to see if flashing with another "series" ROM will fix the Bl6000 pro hardware compatibility issues.
Hi guys, I hope someone can help coz I'm at the end of my tether!.
I've got a Hudl v1 which I factory reset because it was getting slow with stock ROM (never changed anything).
I come to the Let's get started and I click Start to get to the WIFI selection bit. I connect to my own router and it quickly says Authenticating (which it does), then it say Cannot connect to the internet, check your WIFI, and I click OK which takes me back to the WIFI connection screen. If I reboot at this point and start again, at the connect to WIFI point it says connected and there's the WIFI icon but no triangle icon to continue.
I've tried it on several networks, both open and secured and set it static IP but no luck.
If I use the Google keyboard method of getting to Settings I can browse Ok using Chrome and access Play Store etc and install apps.
I have tried 3 different ROM's now and all are the same. Used RKTOOL to flash it. Factory reset after installing each of them.
Debug mode and rooted now BTW.
I used ES explorer to browse to system/apps folder and renamed the HUDL SETUP apk to something different then reset again. The only difference now is that I have the 3 nav icons at the bottom.
Is there a way around this to skip the WIFI screen and continue to the next setup screen?
Is there a way of killing this process (if so what's it called?) of removing it?
Much appreciate any help.
Cheers
Paul
Factory reset HUDL - cannot get past the wifi screen
Paull,
I am having exactly the same issue my HUDL. I have not been through as many processes as you to get around the startup screen. My main theory now is to wipe the HUDL software and install alternative Android OS. Not sure if that would work in practice, but seems just the HUDL thats the issue.. Is it possible this is a deliberate bug by HUDL to kick the systems gradually off the market? Seems a waste as my HUDL still works well, so be stupid to bin it just yet.
Can you add any advice on how you did the other actions - how did you get your three buttons and did they operate as expected - presuymably not:? Even when I by pass to the keyboard section I am unable to download or update apps or install the Google Now Launcher.
Seems stupid to me. Really keen to find a post a fix for this stupid stupid issue?
Stuart
pwigg said:
Hi guys, I hope someone can help coz I'm at the end of my tether!.
I've got a Hudl v1 which I factory reset because it was getting slow with stock ROM (never changed anything).
I come to the Let's get started and I click Start to get to the WIFI selection bit. I connect to my own router and it quickly says Authenticating (which it does), then it say Cannot connect to the internet, check your WIFI, and I click OK which takes me back to the WIFI connection screen. If I reboot at this point and start again, at the connect to WIFI point it says connected and there's the WIFI icon but no triangle icon to continue.
I've tried it on several networks, both open and secured and set it static IP but no luck.
If I use the Google keyboard method of getting to Settings I can browse Ok using Chrome and access Play Store etc and install apps.
I have tried 3 different ROM's now and all are the same. Used RKTOOL to flash it. Factory reset after installing each of them.
Debug mode and rooted now BTW.
I used ES explorer to browse to system/apps folder and renamed the HUDL SETUP apk to something different then reset again. The only difference now is that I have the 3 nav icons at the bottom.
Is there a way around this to skip the WIFI screen and continue to the next setup screen?
Is there a way of killing this process (if so what's it called?) of removing it?
Much appreciate any help.
Cheers
Paul
Click to expand...
Click to collapse
---------- Post added at 11:35 AM ---------- Previous post was at 10:57 AM ----------
I called TESCO contact centre and they confirmed that the software is no longer support and this sounds like a deliberate bug to stop the devices. - If you have a HUDL I would urge you not to factory reset as this will kill it altogether. I think from an environmental standpoint its atrocious to do this and for TESCO not to have a section about it on the website. They should also be telling people where they can send the devices for recycling or repurposing or offering a very basic OS so it can still be used even with limited fucnctionality. We need to start thinking about the whole picture and getting the information like this out there in the public domain.
Stuart
load settings
stuartcm83 said:
Paull,
I am having exactly the same issue my HUDL. I have not been through as many processes as you to get around the startup screen. My main theory now is to wipe the HUDL software and install alternative Android OS. Not sure if that would work in practice, but seems just the HUDL thats the issue.. Is it possible this is a deliberate bug by HUDL to kick the systems gradually off the market? Seems a waste as my HUDL still works well, so be stupid to bin it just yet.
Can you add any advice on how you did the other actions - how did you get your three buttons and did they operate as expected - presuymably not:? Even when I by pass to the keyboard section I am unable to download or update apps or install the Google Now Launcher.
Seems stupid to me. Really keen to find a post a fix for this stupid stupid issue?
Stuart
---------- Post added at 11:35 AM ---------- Previous post was at 10:57 AM ----------
I called TESCO contact centre and they confirmed that the software is no longer support and this sounds like a deliberate bug to stop the devices. - If you have a HUDL I would urge you not to factory reset as this will kill it altogether. I think from an environmental standpoint its atrocious to do this and for TESCO not to have a section about it on the website. They should also be telling people where they can send the devices for recycling or repurposing or offering a very basic OS so it can still be used even with limited fucnctionality. We need to start thinking about the whole picture and getting the information like this out there in the public domain.
Stuart
Click to expand...
Click to collapse
i know this is old but just going through this on my granddads old Hudl, he died so no way am I getting rid the first post got me interested but didnt know what they keyboard trick was have found out so am posting here to help other users
1. select anywhere that will let you type in text
2. when the keyboard comes up long press the microphone key
3. click on google keyboard settings
4. scroll down to about google keyboard
5. click on privacy policy (it will load up google chrome)
6. in the address bar type in google app
7. the google app will show click on it in the google search results
8. click open in play store
9 click on open
10. in the search bar type settings / play store
11. root your tablet following other guids
hope this helps fill in the blanks
Tesco HUDL1_Post-factory reset Workround
Hi All,
Over the past couple of years I've contributed to the MoDaCo forum on this topic as a HUDL user - since the MoDaCo forum is now defunct (sadly, recently confirmed to me by PaulO'Brien via email), I thought it might be useful to fill in some of the gaps for you by summarising the extensive history surrounding this problem, starting from the first Tesco server outage in early 2019. Much of this was documented in MoDaCo but is now no longer available.
I can also offer you a couple of workround solutions which I’ve tested on a factory-reset HUDL1, and documented as a detailed instruction set within a .pdf file.
Since it isn’t possible to attach anything other than image files to this post. I’ve transferred the file to Google drive. Unfortunately as a new user, it does not appear to be possible for me to include the shareable link within this reply to allow you access…..
If any of you are interested in viewing this file, please let me know via this post and I will look into alternative means of getting it to you.
Viv
viv001 said:
Hi All,
Over the past couple of years I've contributed to the MoDaCo forum on this topic as a HUDL user - since the MoDaCo forum is now defunct (sadly, recently confirmed to me by PaulO'Brien via email), I thought it might be useful to fill in some of the gaps for you by summarising the extensive history surrounding this problem, starting from the first Tesco server outage in early 2019. Much of this was documented in MoDaCo but is now no longer available.
I can also offer you a couple of workround solutions which I’ve tested on a factory-reset HUDL1, and documented as a detailed instruction set within a .pdf file.
Since it isn’t possible to attach anything other than image files to this post. I’ve transferred the file to Google drive. Unfortunately as a new user, it does not appear to be possible for me to include the shareable link within this reply to allow you access…..
If any of you are interested in viewing this file, please let me know via this post and I will look into alternative means of getting it to you.
Viv
Click to expand...
Click to collapse
Hi would you be able to contact me somewhere regarding this? would be interested in taking look at the pdf file
Hi
I would certainly be interested in looking at the .pdf as I have 2x Hudl 1 both of which have been factory reset before I knew Tesco no longer supported them and had swithched off the server.
Thx
Tesco HUDL1_Post-factory reset Workround
KingUsman said:
Hi would you be able to contact me somewhere regarding this? would be interested in taking look at the pdf file
Click to expand...
Click to collapse
Hi,
Since I'm new to this forum and there do seem to be quite a few restrictions on exchange of data, I'll need some advice on how to give folks access to the pdf file. As you'll appreciate, the amount of info is too large to insert into a post 'longhand', so a separate document was really the only way to go with this.
I suspect there will be quite a bit of interest, and it would be a shame if the site's restrictions prevented me from sharing the info.
I notice there is an icon on the post compilation page entitled 'Insert email link' - what exactly does this do, and could we use it to exchange email addresses offline ? I've no objection to corresponding with interested individuals, but I'd rather not broadcast my address too widely....
Cheers, Viv
Grimbo58 said:
Hi
I would certainly be interested in looking at the .pdf as I have 2x Hudl 1 both of which have been factory reset before I knew Tesco no longer supported them and had swithched off the server.
Thx
Click to expand...
Click to collapse
Hi, Happy to let you have a copy, but please see my reply to KingUsman re how best to do it. Not sure why the forums are so restrictive...
My sympathies on being landed with 2 'dead' HUDLs by Tesco - you certainly won't have been alone in this, given the popularity of this tablet and continued buoyancy of the second hand market before the event....
Cheers,
Viv
viv001 said:
I can also offer you a couple of workround solutions which I’ve tested on a factory-reset HUDL1, and documented as a detailed instruction set within a .pdf file.
Since it isn’t possible to attach anything other than image files to this post. I’ve transferred the file to Google drive. Unfortunately as a new user, it does not appear to be possible for me to include the shareable link within this reply to allow you access…..
Click to expand...
Click to collapse
Hi Viv,
I've sent you a PM, and hope you can share the link to the PDF that way?
Thanks,
Rob.
viv001 said:
Hi,
Since I'm new to this forum and there do seem to be quite a few restrictions on exchange of data, I'll need some advice on how to give folks access to the pdf file. As you'll appreciate, the amount of info is too large to insert into a post 'longhand', so a separate document was really the only way to go with this.
I suspect there will be quite a bit of interest, and it would be a shame if the site's restrictions prevented me from sharing the info.
I notice there is an icon on the post compilation page entitled 'Insert email link' - what exactly does this do, and could we use it to exchange email addresses offline ? I've no objection to corresponding with interested individuals, but I'd rather not broadcast my address too widely....
Cheers, Viv
Click to expand...
Click to collapse
I've sent you a PM, can you see if you can send the link through there? If not maybe you can try enter it here with spaces between and see if that works
Sorry, folks - I've tried to unravel the complexities of exchanging information via this forum, but they do seem to me to be insuperable for a 'novice' user. I'll have to explore other ways of sharing the information....
In the meantime, best of luck finding ways to reactivate your HUDLs,
Cheers,
Viv
viv001 said:
Sorry, folks - I've tried to unravel the complexities of exchanging information via this forum, but they do seem to me to be insuperable for a 'novice' user. I'll have to explore other ways of sharing the information....
In the meantime, best of luck finding ways to reactivate your HUDLs,
Cheers,
Viv
Click to expand...
Click to collapse
If you can upload the PDF to this link
https://www.dropbox.com/request/l3mJsUEvPhWvZtMR2mLM
I'll be able to share it with others for you.
Thanks to both you and Viv for helping out with this. If you manage to get that available on dropbox I would be keen (and very grateful) for a copy.
The restrictions on this forum do seem quite onerous. My original attempt to post a reply was rejected because it quoted your post which contained a link!
Thanks
FIXED!
I just managed to get past the setup wizard and get both my Hudl 1's back into service. The problem is not that the Tesco server is gone, but that it's certificate expired on 26th June. If you can escape the wizard and get to settings to set the Hudl's time to before that date the wizard completes successfully.
I've written up how I escaped the wizard and got into the settings to do this - it's s combination of information from this thread and stuff I've found elsewhere, none of it is really mine . No rooting or USB debuuging required.
Find the write up here: Apparently I haven't posted enough here to be able to post the actual link, so try this ....
https colon slash slash rob dot themayfamily dot me dot uk slash hudl
If someone with enough privileges could post an actual link for others to click that would be excellent.
I hope this is useful. Please let me know if you find better/easier ways to achieve the same end effect. If I get time I'll have a look to see if the setup wizard can more easily be disabled, but for now this has got me where I need to be.
Enjoy,
Rob.
[Edited to add: you can find a clickable link under the Home Page in the contact info of my profile]
TigerRob, I went to the website and tried. It still says failed to connect. I did the same thing you did by resetting thinking it was a good idea but totally forgotten about this being a thing with hudls. Im gonna try again and hope for the best.
EDIT: OMG IT WORKS!!!! I guess setting it to 2015 was a bad idea. Should of checked before and set to 22/11/19. Thanks dude!
lemurmad said:
TigerRob, I went to the website and tried. It still says failed to connect. I did the same thing you did by resetting thinking it was a good idea but totally forgotten about this being a thing with hudls. Im gonna try again and hope for the best.
Click to expand...
Click to collapse
Sorry, but not sure what website you went to. If you go to my site there are step by step instructions for recovering - but I still don't have enough posts here to link to it directly. If you click on 'TigerRob' to the left of this post and then follow the link to 'view profile' and then click on the 'Contact Info' tab you will find a link under the 'Home Page' - follow that to my write-up.
I've had a couple of other people confirm that they've made it work - let me know how you get on.
I'm working on a custom ROM, based on the latest stock ROM (JDQ39.20140424.153851) that will have the following features:
- boot 'chime' disabled
- setup wizard & Tesco updates disabled
- Tesco apps and branding removed
- Remaining stock apps updated to latest available for JellyBean/4.2.2
I'm probably a week away from having something that can be tested - if you're interested in having early sight and helping test then please let me know by replying here or PM'ing me.
Rob.
Fixed as well!
Rob, thanks for what is probably the best described fix I've ever seen for a tech problem. It worked perfectly, just as you described at every step, including the lack of download of the settings app so I went back and reset the hudl again but was quicker through the process second time. Excellent job! Rob
lemurmad said:
TigerRob, I went to the website and tried. It still says failed to connect. I did the same thing you did by resetting thinking it was a good idea but totally forgotten about this being a thing with hudls. Im gonna try again and hope for the best.
EDIT: OMG IT WORKS!!!! I guess setting it to 2015 was a bad idea. Should of checked before and set to 22/11/19. Thanks dude!
Click to expand...
Click to collapse
I'll add an instruction not to go too far in the past . The Hudl talks to other sites during setup, and if they have certificates then those certificates will have 'not before' dates, and if you set the time before these dates then those communications will fail ...
TMF Custom ROM v0.1 (for HUdl 1)
I have a working custom ROM that is currently running on 3 of my Hudl's. If any with a bit of experience of flashing the Hudl want to give it a shot then drop me a PM and I'll share a link - but I'd like to get some confidence of it working on other devices before I open up to general downloads.
.
Rob.
This ROM is not Rooted. It just works around the issue of not being able to complete the setup wizard but disabling it and removes most of the Tesco branding. More information once I have confidence that it's good for wider distribution