Always Read Description First Before Flashing!!!!
CM13 BlitzRom For K3 Note Release V3.0
This Rom Is Updated From V2.0:- http://www.needrom.com/download/cm13-20161116-blitzrom-unofficial-v2-0/
Note:-
Please Use This Twrp Recovery :- http://www.needrom.com/download/twrp-3-0-2-7-2/?
Firmware new build
- Fixed all sensor
- Fixed audio call issue
- Fixed Bluetooth connection
- Fixed Wifi drops
- All updates from Cyanogenmod (incl. security updates)
-Bluetooth Speker
-Added OC Kernel (Thanks Sandeep G)
Multi Language
Working
1.Ril
2.Camera
3.Wifi
4.4G On Both Sim
5.Bluetooth
6.Sound loudspeaker
7.Led
8.Dt2w
9.Faster Charging Added (Special Thanks To Sandeep Sethi)
10.Fixed Video Zoom
11.Added Blitz Kernel
Bugs (Haven't Found Any Bug)
You Tell Me
How to install :
1. Reboot recovery
2. Full wipe (data,system,cache dalvik)
3. Install Rom
4. Wait and after done install gapps (Arm64->6.0->Pico)
5. Done reboot
6. Enjoy
Credits:-
1.Ninad Patil (Me) For Porting This Rom
2.Sandeep Sethi for rom porting tutorial and work on Kernel
3.Mohan CM For Cm 13 rom
4.Venkat Pinnamani
5.Risma Ermaya
6.Team AMT
7.Sandeep G (Overlock Kernel)
8.Ankur Raj for video fix
9.Beta Testers
Links:-
1. Rom
2. Gapps (Select Open Gapps ARM64->6.0->Pico)
3.Video Zoom Patch For CM13 Blitz
Press The Thanks Button
Hey, I couldnt test it myself but on needrom there are comments that bluetooth audio streaming doesnt work. Could you test it and if needed fix it
my internal storage has been decreased to 1.0 GB from from 12 GB after installing this rom. Help me please.
My internal storage is not showing up in explorer... Help please
externus said:
Hey, I couldnt test it myself but on needrom there are comments that bluetooth audio streaming doesnt work. Could you test it and if needed fix it
Click to expand...
Click to collapse
Yes Bluetooth audio is not working...also unable to connect to internet using mobile internet...although phone connects to network and can call without any problems....i tried flashing modem ,after that was able to connect to internet using 2g...no 3g or 4 g on both sims....and finally no screen cast...rest everything works... camera n battery is great.
Regards
No thumbnails in Gallery, delete button hides on selecting multiple files some bugs in gallery can someone do a patch for this bug
---------- Post added at 01:09 PM ---------- Previous post was at 01:07 PM ----------
Battery performance in low, lags a lot. Battery drain quickly
Guys New Update COme Fixed All Bug Clean Flash This Rom Please
Thx. but android security patch October 6, in me it seems.
on November 6, It looks in the picture.
which one is correct?
Gapps include.
when new update sir
Contacts app doesn't seem to be able to detect contacts from the SIM card. They are not displayed at all....
I can't connect on 3g/4g on this one
Enviado do meu Lenovo K50a40 através de Tapatalk
zbrix said:
I can't connect on 3g/4g on this one
Enviado do meu Lenovo K50a40 através de Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/k3-note/general/fix-3g-4g-fix-k3-note-t3415579
zbrix said:
I can't connect on 3g/4g on this one
Enviado do meu Lenovo K50a40 através de Tapatalk
Click to expand...
Click to collapse
livgrave said:
http://forum.xda-developers.com/k3-note/general/fix-3g-4g-fix-k3-note-t3415579
Click to expand...
Click to collapse
Thanks my friend now working fine
blitzfire3 said:
Always Read Description First Before Flashing!!!!
CM13 BlitzRom For K3 Note Release V3.0
This Rom Is Updated From V2.0:- http://www.needrom.com/download/cm13-20161116-blitzrom-unofficial-v2-0/
Note:-
Please Use This Twrp Recovery :- http://www.needrom.com/download/twrp-3-0-2-7-2/
Firmware new build
- Fixed all sensor
- Fixed audio call issue
- Fixed Bluetooth connection
- Fixed Wifi drops
- All updates from Cyanogenmod (incl. security updates)
-Bluetooth Speker
-Added OC Kernel (Thanks Sandeep G)
Multi Language
Working
1.Ril
2.Camera
3.Wifi
4.4G On Both Sim
5.Bluetooth
6.Sound loudspeaker
7.Led
8.Dt2w
9.Faster Charging Added (Special Thanks To Sandeep Sethi)
Bugs (Haven't Found Any Bug)
You Tell Me
Known Issue :-
Youtube video zoom (For Fix Lock the screen and unlock. Thanks To Ankur Raj For the Fix)
How to install :
1. Reboot recovery
2. Full wipe (data,system,cache dalvik)
3. Install Rom
4. Wait and after done install gapps (Arm64->6.0->Pico)
5. Done reboot
6. Enjoy
Credits:-
1.Ninad Patil (Me) For Porting This Rom
2.Sandeep Sethi for rom porting tutorial and work on Kernel
3.Mohan CM For Cm 13 rom
4.Venkat Pinnamani
5.Risma Ermaya
6.Team AMT
7.Sandeep G (Overlock Kernel)
8.Ankur Raj for video fix
9.Beta Testers
Links:-
1. Rom
2. Gapps (Select Open Gapps ARM64->6.0->Pico)
Press The Thanks Button
Click to expand...
Click to collapse
Bugs
1. Many Sensors Not working (magnetometer, gyroscope,gravity sensor)
2. NVRAM errors must be fixed by the devloper (Even though we can fix them)
3. I have some issue with jio SIM (but it appears to be from the network's side)
4. CAn you please tell me what fast charging is (I dont feel it,My phone charges like a snail)
But the rom is very smooth and a Very very thanks for it.
Anunay.j said:
Bugs
1. Many Sensors Not working (magnetometer, gyroscope,gravity sensor)
2. NVRAM errors must be fixed by the devloper (Even though we can fix them)
3. I have some issue with jio SIM (but it appears to be from the network's side)
4. CAn you please tell me what fast charging is (I dont feel it,My phone charges like a snail)
But the rom is very smooth and a Very very thanks for it.
Click to expand...
Click to collapse
Gyroscope doesn't work that well for me, not even on VIBE ROMs, it's because it's not an actual gyroscope but rather a virtual gyroscope sensor reading that's made by combining readings from accelerator and compass. Rest of the sensors work just fine for me. I didn't even get the NVRAM error (if you are referring to the NVRAM error in the list of available Wifi networks). Fast charging works but only if you use proper cables. Original k3 note micro USB cable and adapter work just fine for me, 2 amps charging, you can measure the current with an app like Ampere, but an actual inline ampmeter is more precise of course. In either case charging works fast as well.
This ROM can glitch out sometimes, apps crash, but for the most part everything works OK. I thought I might go back to Lollipop ROMS, but then I tried this and I think I'll stick with it for a little while longer, see how it fares on the long run...
Rom is really wonderful. Clean ui and fast.
livgrave said:
Gyroscope doesn't work that well for me, not even on VIBE ROMs, it's because it's not an actual gyroscope but rather a virtual gyroscope sensor reading that's made by combining readings from accelerator and compass. Rest of the sensors work just fine for me. I didn't even get the NVRAM error (if you are referring to the NVRAM error in the list of available Wifi networks). Fast charging works but only if you use proper cables. Original k3 note micro USB cable and adapter work just fine for me, 2 amps charging, you can measure the current with an app like Ampere, but an actual inline ampmeter is more precise of course. In either case charging works fast as well.
This ROM can glitch out sometimes, apps crash, but for the most part everything works OK. I thought I might go back to Lollipop ROMS, but then I tried this and I think I'll stick with it for a little while longer, see how it fares on the long run...
Click to expand...
Click to collapse
I already know that we have a virtual gyroscope, but the real problem is with magnetometer. It does not appear to work. NVRAM errors are mostly found in WIFI (We CAN FIX THEM BUT THIS MUST BE FROM DEVS SIDE ALSO). Last by fast charging i meant fast charging on software side which kills processes (like doze). because on stock the charging was a faster with same cable battery just before flashing the rom.
After a few days of additional use I think that there is a problem with the proximity sensor during calls. It's like the screen is blanked but still remains active. I keep pressing the screen during calls, activating "call on waiting", hanging up, or accessing menus, launching apps. There might be something in what @Anunay.j said that sensors are messed up. I'll try the new Vibe release for a few days, and see how it works...
livgrave said:
After a few days of additional use I think that there is a problem with the proximity sensor during calls. It's like the screen is blanked but still remains active. I keep pressing the screen during calls, activating "call on waiting", hanging up, or accessing menus, launching apps. There might be something in what @Anunay.j said that sensors are messed up. I'll try the new Vibe release for a few days, and see how it works...
Click to expand...
Click to collapse
try to turn off the dt2w. Problem might be there.
I'm having same issue. After ending call screen is a mess[emoji15]
Related
CyanogenMod Rom for Samsung Galaxy Tab Pro 12.2, SM-T900 (v2wifixx)
NEW VERSION CyanogenMod 12.1, "Lollipop" version 5.1.1
CM 12.1 compiled for the SM-T900 from source code
These are unofficial releases of CyanogenMod for the Samsung Tab Pro 12.2 SM-T900 (v2wifixx). CyanogenMod is an aftermarket firmware for phones and tablets based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors. These ROM's are compiled from CM sources, and based on CM ports by crpalmer for the Tab Pro 10.1 (SM-T520), he deserves the credit, this would not be possible without his work. I also want to thank Valera1978 for his work on our sister tablet, the SM-P900.
WARNING: This is released without warranty of any kind. Use of this software could damage or destroy your tablet. Use at your own risk.
How to install:
1. Root device
2. Download Rom and Gapps
3. Install custom recovery, recommend TWRP Tab Pro 12.2 (v2wifixx), can be flashed with Odin or from existing recovery.
You may also use Clockwork Recovery, a custom recovery img file can be installed using dd and Terminal Emulator. First download to /sdcard, and install to /dev/block/mmcblk0p10.
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
4. Backup stock with custom recovery.
5. Flash Rom and Gapps.
6. Enjoy
Downloads
CyanogenMod 12.1 "cm-12.1-20150808-UNOFFICIAL-v2wifixx.zip"
https://www.androidfilehost.com/?fid=24052804347790353
CyanogenMod 12.1 "cm-12.1-20150730-UNOFFICIAL-v2wifixx.zip"
https://www.androidfilehost.com/?fid=24052804347783830
Gapps for CyanogenMod 12.1 Lollipop 5.1.1
https://www.androidfilehost.com/?fid=24052804347783826
Source files for CyanogenMod for the Samsung Tab Pro 12.2 SM-T900 (v2wifixx) on Github
Building CyanogenMod 12.1 for the SM-T900 from source is not too difficult. You do need basic computer knowledge especially with linux. CyanogenMod has wikis on how to compile for different devices. If you setup for picassowifi, just add the local manifest under .repo, then
Code:
repo sync
and the kernel, vendor and device files will automatically download from Github. Then
Code:
source build/envsetup.sh
and
Code:
brunch v2wifixx
Good luck and have fun.
Local Manifest
https://github.com/Pentahex/android_repo_local_manifests_v2wifixx
Device source:
https://github.com/Pentahex/android_device_samsung_v2wifixx.git
Vendor source:
https://github.com/Pentahex/android_vendor_samsung_v2wifixx.git
Kernel source:
https://github.com/Pentahex/android_kernel_samsung_v2wifixx.git
Again, source files are a fork from crpalmer and Valera1978, many thanks for their efforts.
Awesome and thank you for your contribution.
Sent from my A0001 using Tapatalk
Thank you chhaggerty. This CM11 built directly from the cyanogen source code is very smooth and reactive. It's runs better than the predecessors, as it is created directly from cm11 source code and adapted to the SM-T900 instead of being a direct port from another device. I have fortunate to run this version in beta for 5 or 6 days now and I have not seen any issues in this release, but from the screen rotation that only seem to react if the app has a default setting. You can use the Set Orientation, or the Ultimate Rotation Control app to pick the rotation you desire.
This list of functions, based on weaknesses in other builds and ports for the Tab/Note family, have been tested without any issues:
- mtp - to activate go to Settings/About tablet/ and tap 8 times on Build number - The menu will now have Settings/{ } Developer options/ activated. Check mark USB debugging notify.
- adb
- External SD - I used JRummy's SD KitKat Fixer to allow my apps to write to the removable card (common w. all cm ROM's)
- USB OTG including USB storage
- Off-mode charging
-----------------------------------------
- Lid sensor is working, and no SOD's has been observed
- IR blaster is working, i've used IR2.0
- OC settings - located in Settings/Performance/
- Advanced reboot - to activate go to Settings/About tablet/ and tap 8 times on Build number - The menu will now have Settings/{ } Developer options/ activated. Check mark Advanced reboot.
-----------------------------------------
- Play Store
- Google Play movies download and playback
- Google Play streaming Movies & TV
- DRM - tested with Audible, Google Books and Amazon Kindle
-----------------------------------------
- Zona
- Popcorn Time - need upgrade to latest version 2.3 beta, includes built-in VPN and Chromecast support with subtitles, earlier version timed out
- YouTube 720p playback - 1020p possible with small hack, 1440p will work w. v5.9.0.12
- Netflix
-----------------------------------------
- Chromecast with #MirrorEnabler hack, allowing for screen cast
- MHL connector
- Miracast
-----------------------------------------
- Capacitive lights - I assume this is the backlights for the capacitive buttons
- Capacitive keys
- Home button - correct function performed
- Brightness manual + auto
- Vibrator
-----------------------------------------
- GPS lock and voice directed navigation
- WiFi both 2.4 GHz & 5 GHz are working
- Bluetooth
- Microphone
- Audio on both speakers
- Headphones
-----------------------------------------
- Camera
- Torch
- Camera Sensors
-----------------------------------------
- Xposed Framework and modules - need re-initialization after each boot (common to all cm ROM's)
- Superuser
- Hangouts Dialer phone calls via Hangouts
-----------------------------------------
The following are standard limitations and options for cm11:
If you need write access to your external SD-card i suggest to d/l JRummy's SD KitKat Fixer and if you need init.d support d/l Uni-init by Ryuinferno. If you think to much heat is building up use Performance/Profile set to Power save, Performance/Processor/CPU governor/ set to ondemand, in addition to increase battery time you can set Wi-Fi/Advanced/Keep Wi-Fi on during sleep/ to Only when plugged in and make sure the Wi-Fi/Advanced/Wi-Fi optimization/ is checked and reduce Display/Sleep/ to below 1 minute. You can also use some apps to improve battery eg Easy Battery Saver, or the more sophisticated AutoCon+ Save Battery & Data and and to put hanging apps to hibernation Greenify that I believe require Xposed Installer. To improve charging time, you can use an app eg Faster Charger. Finally, I have also used PurePerformances in order to further improve the performances and VIPER4AndroidFX to allow for louder speaker sound and enhanced listening experience.
I would love to see someone building an AOSP kernel containing eg fast charge, and OC, cifs etc. as these will never be part of a true cm11 kernel.
bonuzzz has an overclocked kernel with source code for the P-900 TouchWiz, but it runs just as well on the T-900, that could be used as a base for conversion into AOSP, if someone is willing to give it a try.
much better than the stock rom. Thank you.
Hi,
Display mirror over Chromecast first works, now after upgrading some apps (google Play) it stops working.
I can cast via YouTube, but the Chromecast is not listed in Display Mirror.
Any ideas?
kind regards, Nils
Gesendet von meinem SM-T900
hondong said:
Hi,
Display mirror over Chromecast first works, now after upgrading some apps (google Play) it stops working.
I can cast via YouTube, but the Chromecast is not listed in Display Mirror.
Any ideas?
kind regards, Nils
Gesendet von meinem SM-T900
Click to expand...
Click to collapse
In order to get Screen Mirroring over Cromecast to work on the T-900, you will need to apply a hack, #MirrorEnabler, http://forum.xda-developers.com/hardware-hacking/chromecast/experimental-enable-mirroring-device-t2812193, wherein you activate: Mirrorstatus and QuickSettings Mirror. After this you should see the option Cast screen in the dropdown menu in the upper left corner. If it's not there uncheck, and recheck the options in #MirrorEnabler, also #MirrorEnabler require #Superuser allowed, but the question should pop-up when you activate the hack.
5G didn't work on mine any idea??
naomile said:
5G didn't work on mine any idea??
Click to expand...
Click to collapse
Are you talking about 5G Speed Up Internet Browser (no issues), 5G NET Softphone, or what app specifically? Apparently you meant WiFi over the 5GHz band, it should work though.
so much better then the stock rom, thank you!
arcadia2uk said:
Are you talking about 5G Speed Up Internet Browser (no issues), 5G NET Softphone, or what app specifically?
Click to expand...
Click to collapse
I meant 5G wifi but figured out how to get it already. Thanks
Yep, everything has worked so far (include IR). The rotation still does not work but it is not a problem. I can use an app to fix it. Now we just have to wait for cyanogenmod to release cm 12 (android 5.0) and it is perfect. Can't wait for project Volta. It makes my nexus 5 stand by battery lasts so long. Thanks a lot, OP.
I wish they could include multi window on cm althou they said they are not going to.... or custom rom based of cm with multi window would be nice
Quantra said:
I wish they could include multi window on cm althou they said they are not going to.... or custom rom based of cm with multi window would be nice
Click to expand...
Click to collapse
I'm rather happy using xHaloFloatingWindow (see usage instructions, in 2nd post) under Xposed Installer together with Floatifications
I installed this today, and I must say excellent job. Almost everything is working great. I only have one issue, Amazon Prime Instant Video app work great on the stock rom, but is incompatable running CM 11. Does anyone else use Prime? If so is there a work around? Thanks in advance.
Sent from my SM-T900 using Tapatalk
v1 or v2?
Sorry for a bit of a silly question.....everything i have (twrp and cpu z apps) say i have a v2wifiue. However, when I try to install i get the error message that says it is a v1. I am not sure how to proceed. I have a tab pro sm t900 purchased in USA at best buy, again, thinking it is v2. Please advise, i am looking forward to this ROM. Thanks for all of your efforts.
----EDIT----
I went into the build prop just to see the fingerprint and build id(s) and it is all 100% V2. I hope this will help someone identify my problem. Thanks again
I installed this today and everything was working great for the inital setup. Upon trying to download and finalize all my app setups I started to have issues. Examples are google play music, bitdefender, and facebook for this part. Play music started downloading all the music fine till about half way, then got stuck. Bitdefender was successfully setup but when starting inital scan it got to 1% and doesnt get past it. Facebook opens up then autoloads my email in the username but when i try to type it locks up and crashes. Tried to get it to reboot and it also locked. Held power button till finally reset and when it started back up it auto started downloading songs. It downloaded a few songs again and then locked up again. Any ideas of what I can try to get this working better? Also anyone know of a keyboard that has a floating keyboard like the samsung one that we have on the 12.2? Any and all help is greatly appreciated.
Everything seems to work fine except tab hanging when left in stand by for more than an hour and playing with lid cover on n off several times I have to hard restart, did factory reset twice, any suggestions appreciated greatly.
Sent from my SM-T900 using XDA Free mobile app
csmoore88 said:
Sorry for a bit of a silly question.....everything i have (twrp and cpu z apps) say i have a v2wifiue. However, when I try to install i get the error message that says it is a v1. I am not sure how to proceed. I have a tab pro sm t900 purchased in USA at best buy, again, thinking it is v2. Please advise, i am looking forward to this ROM. Thanks for all of your efforts.
----EDIT----
I went into the build prop just to see the fingerprint and build id(s) and it is all 100% V2. I hope this will help someone identify my problem. Thanks again
Click to expand...
Click to collapse
What version of TWRP did you install?
Sent from my SM-N900V using Tapatalk
Zeroskhaos said:
I installed this today and everything was working great for the inital setup. Upon trying to download and finalize all my app setups I started to have issues. Examples are google play music, bitdefender, and facebook for this part. Play music started downloading all the music fine till about half way, then got stuck. Bitdefender was successfully setup but when starting inital scan it got to 1% and doesnt get past it. Facebook opens up then autoloads my email in the username but when i try to type it locks up and crashes. Tried to get it to reboot and it also locked. Held power button till finally reset and when it started back up it auto started downloading songs. It downloaded a few songs again and then locked up again. Any ideas of what I can try to get this working better? Also anyone know of a keyboard that has a floating keyboard like the samsung one that we have on the 12.2? Any and all help is greatly appreciated.
Click to expand...
Click to collapse
I haven't had any similar problems. Did you do a clean install with wipe of data and cache? You could wipe cache from recovery and see if that helps.
Sent from my SM-N900V using Tapatalk
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
------------THIS IS AN UNOFFICIAL UNSUPPORTED BUILD-----------
This is my attempt at porting CyanogenMod 11 to the Galaxy Tab 4 10.1. I use a SM-T530NU, so that is the only device I have tested.
Any other device variations have not been tested and are at your own risk. I will not be able to support other variations as I don't own them for testing.
Special thanks to MetaIIica - I have been using his Alpha build of PAC-ROM KitKat since December. I studied the code for that, along with stock and some other ROMs before starting this port. This is my first time doing any work with Android, so I'm not sure if I'm technically doing things correctly or not.
I know CyanogenMod 12 is under development already, but I have decided to do a CM11 based build in hopes of a making a stable daily driver offering. I have fixed many of the issues present that were present in the PAC-ROM build. They can probably be backported to PAC-ROM easily if its built with my tree, but I prefer the plain CM-based offering myself.
You may get the source of my changes for this ROM on my github. If you'd like to help and submit a patch, feel free to open a pull request. You will of course be credited accordingly.
See below for instructions, what's working, and issues I fixed over the PAC-ROM Alpha.
For any bug reports or feature requests, please use the appropriate tabs at the top of the thread. Please include as much information as possible and if possible a logcat or other debug information in the case of bugs. Requests for supporting other device variations will not be honored - sorry,
Feedback and constructive criticism is always appreciated. I hope you enjoy using the ROM; if you use the ROM, please consider leaving a thanks, rating, and/or review
CURRENT VERSION:
DOWNLOAD LINK - 04/26/2015
OLD VERSIONS:
DOWNLOAD LINK - 04/20/2015
DOWNLOAD LINK - 04/19/2015
DOWNLOAD LINK - 04/07/2015
DOWNLOAD LINK - 04/05/2015
DOWNLOAD LINK - 04/04/2015
DOWNLOAD LINK - 04/03/2015
DOWNLOAD LINK - 03/29/2015
DOWNLOAD LINK - 03/24/2015
DOWNLOAD LINK - 03/23/2015
DOWNLOAD LINK - 03/22/2015
INSTRUCTIONS
- Install PhilZ Touch Recovery (recommended)
- Copy CM11 & GAPPS (Optional) ZIPs to your SDCard
- Boot into Recovery
- Do "Clean to Install a New ROM" (FULL WIPE REQUIRED INCLUDING SYSTEM, NOT JUST DATA/CACHE - even if coming from another CM-based ROM, as my device tree is different)
- Flash CM11 ZIP
- Flash GApps zip from SDCard
- Reboot
UPGRADING
-In general, you should be able to just flash over the previous build, but if you encounter any weird issues please clean using the steps above
Working that I've tested:
Audio: Speakers, Headphones, Bluetooth
Bluetooth
CIFS/NFS (Network File Systems - see notes below)
Front Camera
GPS
IR Blaster [SM-T530NU Only]
Magnetic Cover Sleep/Wake
MTP
Rear Camera
USB OTG
Video (w/ Hardware Decoding)
WiFi (2.4ghz & 5ghz)
NOTE ON BUTTONS: This ROM is configured to use the hardware buttons-- so you won't see the software buttons taking up space at the bottom of the screen, as they are disabled. This is not a bug. Use the hardware buttons, as they are the same. If you really want the software buttons for some reason, edit /system/build.prop, change qemu.hw.mainkeys to 0, save, and reboot. If you map the menu button to a long press of another button, some apps such as TitaniumBackup will count this as a hardware key and hide their soft menu button - but only after a reboot.
NOTE ON CIFS/NFS: Many of the mounting utilities on the play store are outdated and broken due to changes in the linux kernel. For best luck, mount using the command line. For CIFS, you can tweak CIFSManager into working - see this thread
CHANGELOG:
[04/26/2015]
-Fix reading MAC address from EFS
-Fix suspending charging while the device is off (special thanks to @sub77 for pointing out the right config option)
[04/20/2015]
-Enable physical keyboard menu for use with BT/USB keyboards. Auto hides soft keyboard & allows selection of layout.
[04/19/2015]
-Add support for magnetic cover sleep/wake
[04/07/2015]
-Roll back to using the Non-CAF Display HAL Fixes SurfaceFlinger constantly eating 100% CPU
[04/05/2015]
-Fix issues with reconnecting Bluetooth Devices after a reboot (if upgrading, break pairing and re-pair all devices)
-Fix mounting /efs
-Fix persistant Bluetooth MAC Address
[04/04/2015]
-Fix issues with detecting whether or not the device has a hardware menu button.
[04/03/2015]
-Fix the Time Service, allowing Date & Time to persist during a reboot without a wifi connection. Special Thanks: sub77 for pointing the discussion in the thread in the right direciton on this
[03/29/2015]
-Support Bluetooth Audio & AVRCP
-Support Consumer IR [SM-T530NU Only]
-Upgrade Display HAL to CAF Version
-Misc Bugfixes and Cleanup
[03/24/2015]
-Fix Missing Sensors HAL (Fixes Autorotate regression from the last build)
-Behind the scenes work for IR (need someone to test on plain 530 as IR is NU only). Does not actually work yet because its using the stub HAL, but the kernel drivers are loaded, and the IR service runs.
[03/23/2015]
-Fix lighting issues with rear camera
-Reduce some dependencies on vendor libs.
[03/22/2015]
-Added support for Front/Back Camera
-Added support CIFS/NFS
-Fixed 5 ghz WiFi
-Fixed Duplicate VSYNC spam in logcat
-Fixed issues with video decoding (YouTube HD, MXPlayer HW+ Video, etc)
-Fixed various Bluetooth issues
-Fixed wallpaper issues with Trebuchet
-Identify device correctly as MSM8226 chipset
-Use Hardware Buttons by Default
XDA:DevDB Information
CyanogenMod 11 Unofficial [TM-530NU], ROM for the Samsung Galaxy Tab 4
Contributors
starlightknight
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2015-03-29
Beta Release Date: 2015-03-22
Created 2015-03-29
Last Updated 2015-04-25
Congratulations ! :good:
Nice ROM, it installed fine on my T530 will test some more, thanks for the hard work
I got this installed but the back button and recents button didn't work at all. Its a fast rom though but it would be nice if it was a barebones CyanogenMod without the Pac Rom extras installed too.
Time for a new test, i'll test it in my t530 and report back the results.
Sent from my GT-I9300 using XDA Free mobile app
steve30x said:
I got this installed but the back button and recents button didn't work at all. Its a fast rom though but it would be nice if it was a barebones CyanogenMod without the Pac Rom extras installed too.
Click to expand...
Click to collapse
It is a pure Cyanogenmod without the Pac extras. If you're seeing them, make sure you did a full wipe before flashing as noted in the original post - you may have remnants of PAC-ROM in /system. The best way is to use PhilZ option to "Clean to Install a new ROM" as that wipes everything correctly. That could also be causing your issues with the back button as well. I completely rebuilt the device tree for this rom over the pac build, as that was based on MSM8974 when this is an MSM8226 device. If a full wipe wasn't done, you have stuff for the other device tree in /system that will mess things up. If the issue persists after a full wipe, please let me know what varient of 530 you're using, and pastebin a logcat of what happens when you press the back or recent events buttons.
starlightknight said:
It is a pure Cyanogenmod without the Pac extras. If you're seeing them, make sure you did a full wipe before flashing as noted in the original post - you may have remnants of PAC-ROM in /system. The best way is to use PhilZ option to "Clean to Install a new ROM" as that wipes everything correctly. That could also be causing your issues with the back button as well. I completely rebuilt the device tree for this rom over the pac build, as that was based on MSM8974 when this is an MSM8226 device. If a full wipe wasn't done, you have stuff for the other device tree in /system that will mess things up. If the issue persists after a full wipe, please let me know what varient of 530 you're using, and pastebin a logcat of what happens when you press the back or recent events buttons.
Click to expand...
Click to collapse
I always completely wipe everything before installing a new rom. Never wiping the tablet before installing a new rom might cause problems. I no longer have the rom installed. I will install it again and see if it was just a flike that it didnt work properly the last time. I also have Philz recovery installed because its the only one that has full brightness on the screen.
Simply great. Everything i need works great. Finally a kitkat aosp rom that given me everything i need. Flashed in TWRP on a t530 (wifi only) and running perfectly fine. Good job mate. If you want me to test anything on t530 just tell me.
Btw, otg works, so my usb keyboard is working.
Otg works, YouTube and twitch.tv works, BT works, rotation works, camera works, xposed works, everything i have tested works
Sent from my GT-I9300 using XDA Free mobile app
pirulazul said:
Simply great. Everything i need works great. Finally a kitkat aosp rom that given me everything i need. Flashed in TWRP on a t530 (wifi only) and running perfectly fine. Good job mate. If you want me to test anything on t530 just tell me.
Btw, otg works, so my usb keyboard is working.
Otg works, YouTube and twitch.tv works, BT works, rotation works, camera works, xposed works, everything i have tested works
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks! Glad to hear that it is working well for you. I believe the only difference between the SM-T530 and the SM-T530NU is the the NU has an IR blaster, which I haven't actually enabled yet. I need to figure out how to test that because I never use it. After i do that and post a build with IR, it will be useful if you check and make sure it doesn't break the regular 530. Those two from what I can tell are vary similar, its more of any celluar varients that I would be worried about, because this is build for wifi only..
Let me know if you find anything broken
I got this to work properly. I have one question though. Is there a way to get youtube working without having all the other GAPPS rubbish installed. I noticed that the tablet got slower as soon as I installed GAPPS. The tablet flies along without GAPPS installed and I only want youtube working without all that other rubbish bogging down the tablet.
steve30x said:
I got this to work properly. I have one question though. Is there a way to get youtube working without having all the other GAPPS rubbish installed. I noticed that the tablet got slower as soon as I installed GAPPS. The tablet flies along without GAPPS installed and I only want youtube working without all that other rubbish bogging down the tablet.
Click to expand...
Click to collapse
Glad its working for you now
To be honest, I'm not sure - you could try copying the Youtube APK off of the device and then side-loading it on a fresh install without installing all of GAPPs, but I'm not sure if that will just prompt you to install all of them or not if you do that.
Are there particular use cases you are noticing are slower? I did not really notice any difference with or without GAPPs, other than the initial boot time as they were unpacked and installed. If there are particular situations that cause this, then we could dump some logs to see if there is something that could or needs to be optimized.
starlightknight said:
To be honest, I'm not sure - you could try copying the Youtube APK off of the device and then side-loading it on a fresh install without installing all of GAPPs, but I'm not sure if that will just prompt you to install all of them or not if you do that.
Click to expand...
Click to collapse
I have youtube backed up with all my other apps with Titanium Backup and when I try running youtube without GAPPS it fails and a popup states Youtube has failed to start (or something similar) and if I install the GAPPS I have which is older than the version that is needed it tells me that google needs to be updated. So then I update that and tried freezing the google apps I dont want or use but youtube fails.
starlightknight said:
Are there particular use cases you are noticing are slower? I did not really notice any difference with or without GAPPs, other than the initial boot time as they were unpacked and installed. If there are particular situations that cause this, then we could dump some logs to see if there is something that could or needs to be optimized.
Click to expand...
Click to collapse
The whole tablet is slightly slower with GAPPS installed. I've opened a gapps zip with WINRAR and removed some of what I dont want and only left whats needed for play store to run so it improved a bit.
Hi,
I didn't try it for now...
But thanks for the good work!!
For the Gapps, have you try PAGapps?
It has different package with a lot of options.
The smallest one should be around 136Mo. You can also remove some apk with a config file.
All other apps are available on Play Store...
Gustave17 said:
Hi,
I didn't try it for now...
But thanks for the good work!!
For the Gapps, have you try PAGapps?
It has different package with a lot of options.
The smallest one should be around 136Mo. You can also remove some apk with a config file.
All other apps are available on Play Store...
Click to expand...
Click to collapse
The GAPPS package I modded is only 76MB. Its just the bare essentials
steve30x said:
The GAPPS package I modded is only 76MB. Its just the bare essentials
Click to expand...
Click to collapse
Oh ok, so it's what we need...
Y
steve30x said:
I have youtube backed up with all my other apps with Titanium Backup and when I try running youtube without GAPPS it fails and a popup states Youtube has failed to start (or something similar) and if I install the GAPPS I have which is older than the version that is needed it tells me that google needs to be updated. So then I update that and tried freezing the google apps I dont want or use but youtube fails.
The whole tablet is slightly slower with GAPPS installed. I've opened a gapps zip with WINRAR and removed some of what I dont want and only left whats needed for play store to run so it improved a bit.
Click to expand...
Click to collapse
I used an aroma based gapps. You can install only what you need. About using YouTube without gapps, i dont know if tubemate could do the trick. Use aptoide to install it if you dont like play store. Here is the link for the aroma gapps: http://forum.xda-developers.com/showthread.php?t=2547250
Sent from my GT-I9300 using XDA Free mobile app
---------- Post added at 11:01 PM ---------- Previous post was at 10:45 PM ----------
Oh, forgot one thing, rear camera is too dark but frontal camera is fine.
Sent from my GT-I9300 using XDA Free mobile app
pirulazul said:
Oh, forgot one thing, rear camera is too dark but frontal camera is fine.
Click to expand...
Click to collapse
It has something to do with the lighting detection or some other initial initialization that I haven't figured out yet, but as a workaround if you toggle between camcorder mode and back it'll brighten up.
starlightknight said:
It has something to do with the lighting detection that I haven't figured out yet, but as a workaround if you toggle between camcorder mode and back it'll brighten up.
Click to expand...
Click to collapse
Tested and working fine. Is a nice workaround. I dont mind about this bug as I only use front camera for Skype and such things, but im glad this workaround is pretty easy and fast
Sent from my GT-I9300 using XDA Free mobile app
Hi Everyone,
I updated the original post with a new build. This build should fix the lighting issues with the rear camera the first time it is used. After I debugged the mode switching with logcat I was able to find out what the issue was. I also am working on reducing dependencies on vendor libs where possible by getting more of the modules that can be built from source building from source.
I've started exploring IR blaster support for NU users and I am continuing to look for a solution for bluetooth audio, but I don't have either yet. Stay tuned for future updates
If you already installed the ROM most times you should be able to flash over it, but if you see anything weird after, try wiping to confirm if its a bug or weirdness after upgrading (you can always nandroid before wiping if you're unsure and roll back if its not related to upgrading).
Please let me know if you find any issues. Include model number and if possible a logcat as well.
Enjoy!
Congrats starlightknight!
Anyone tried this on the SM-T530?
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Now I can recommend the firmware for daily use.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Root
Settings -> About tablet -> press 7 times "Build number"
Then Settings -> Developer options -> Root access
Work
Ril, wifi, sound, vibra, bluetooth, camera, sdcard, gps, mtp, otg, flashlight
Known Issues
Links
LineageOS Builds
SM-T580
5. 20171231: gps fix: https://drive.google.com/file/d/1OIZsMIbqeJDyo-OuL4sEJH7A5pLzaN7-/view?usp=sharing
4. 20171202: flip cover, offline charge: https://drive.google.com/file/d/1BGAPDkb3EKspHm98VFV6ULoIpKjJhJgN/view?usp=sharing
3. 20171201: flip cover, minimum autobrightness, cpu settings from original stock boot: https://drive.google.com/file/d/1StcJjaI7lMHj-DM2aql4XDr6gd2BNqSW/view?usp=sharing
2. 20171130: bluetooth, sdcard as internal storage, cleanup, overlay framework with correct values from stock: https://drive.google.com/file/d/1IzjmpVcHe1whXFYh2LXGyTz2rRams5oV/view?usp=sharing
1. 20171127: https://drive.google.com/file/d/1WI9aeY-GShwjMRZTLc5eeOz8w2TcWj_e/view?usp=sharing
SM-T585
6. 20171231: https://drive.google.com/file/d/1sPCij87eKwtsdZhU3XyDFf3GLeqKXl4w/view?usp=sharing
5. 20171202: flip cover, offline charge: https://drive.google.com/file/d/12YSZbhtaG5swob9HxkNpd5DLLWpfMbTb/view?usp=sharing
4. 20171201: flip cover, minimum autobrightness, cpu settings from original stock boot: https://drive.google.com/file/d/1vQuL1LXOk5Kow3fEjNj5r0ey8K7Doum2/view?usp=sharing
3. 20171130: bluetooth, sdcard as internal storage, cleanup, overlay framework with correct values from stock: https://drive.google.com/file/d/1s5zjiZr66ySO3DiUKxt06xWimE0KkJI6/view?usp=sharing
2. 20171125: a lot of changes (ril, camera, gps, video play, some optimizations), now firmware almost done, and can be use for daily drive. Please use my twrp, in other case you need remove first line in \META-INF\com\google\android\updater-script inside archive: https://drive.google.com/file/d/1MELQV4w1zK0VzV_-r6sHSsG8gXgSjn7_/view?usp=sharing
1. 20171116: https://drive.google.com/file/d/15uBG7WsGX9j9lO8-C3VkFjj6wfQzoMuY/view?usp=sharing
TWRP
SM-T580
Use official TWRP from: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html
SM-T585
This twrp - this is official 3.1.1.0 for wifi version, I had repacked it with T585 info.
A first line in any lineage firmware - version check, in T585 it's should be gtaxllte. With this twrp it's correct.
2. 20171202: odin version 3.2.0.0 (md5: a9081075f801f9a4881f2a11365111cf): https://drive.google.com/file/d/1140aSajZTl4wcdMs8IbXLP04Yjoi2-7d/view?usp=sharing
1. 20171125: odin version 3.1.0.0 (md5: 33dfa464ef42e7d408e9d1639b2aa137): https://drive.google.com/file/d/17yNKuK4lzpInzkvy0ve8iGL2NBkydl0Z/view?usp=sharing
Gapps
http://opengapps.org/
Platform: ARM
Android: 7.1
Variant: any, usually I'm using micro or nano
Sources
Sources: https://github.com/Lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
SM-T580
Device: https://github.com/Valera1978/android_device_samsung_gtaxlwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxlwifi
SM-T585
Device: https://github.com/Valera1978/android_device_samsung_gtaxllte
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxllte
Thanks
Thanks to LineageOS team
Congrats with beginning!:good:
Wait for fix calls and mobile data.
Congrats Brother ????
Good work.
This T585 build also booted on T580. Works fine, only RIL staff is annoying (T580 do not have SIM)
I built my own T580 LOS 14.1 build. It booted but media and audio are dead.
tank0412 said:
Good work.
This T585 build also booted on T580. Works fine, only RIL staff is annoying (T580 do not have SIM)
I built my own T580 LOS 14.1 build. It booted but com.android.phone is crashed. Discovering it now.
Click to expand...
Click to collapse
if u dont hav sim on it than remove that apk issue will be fixed autmoatically
Just flashed this on a t580 and all seems well other than the known bugs thank you so much for the build hopefully many more to follow
I've been following your work on this device since you started. Very excited to give it a try. Thank you so much for all of your efforts.
Can we get some screenshots????
paulo boë said:
Can we get some screenshots????
Click to expand...
Click to collapse
Screenshots have no differences from other devices with LOS 14.1
YEESSS! Congrats buddy! Keep going!!!! I will try this asap!
Sad about no mobile data. Can't live without that. Sorry. Big hopes. I'll wait until it works and I'll give it a try.
Thanks for your effort.
Enviado desde mi SM-T585 mediante Tapatalk
tank0412 said:
Good work.
This T585 build also booted on T580. Works fine, only RIL staff is annoying (T580 do not have SIM)
I built my own T580 LOS 14.1 build. It booted but com.android.phone is crashed. Discovering it now.
Click to expand...
Click to collapse
Nice to see you cover this development as well. Maybe it is possible to join forces with Valera1978 ? I will try this build as well of course and report on issues. Hopefully it is not too much of a problem to run it on a T580 (without SIM).
@Valera1978. Your ROM performs very well (it is fast too !).
As expected, it runs well on a SM-T580 as well, you can just skip the SIM part in set-up with no problem at all.
Of course it is still work in progress, so bugs to be expected. However I concluded that sound is working properly ,which is fantastic.
In your opening post you said GPS is not working, but I think it is working (Navmii and Google maps anyway).
I did not find many problems, but I can report some:
- It is a bit strange that in setup you are being asked to put back a backup from the cloud while you have not been able (yet) to set up your internet connection). However this provlem can be circumvented easily by just answering that you want to set-up as a new device. In the next screen you set-up your internet connection and then you go can go back and choose to restore from backup (which works flawlessly);
- External SD card cannot be formatted as "internal storage", which is a pity, because I use a brand new 128 Gb SD card (this works in the stock ROM, so I think it is some kind of a bug);
- On an SM-t580 there is of course no SIM. In the lock screen I now see "no service". On a post to Tank0412 Oves786 suggests to remove an APK, but I wouldn't know which one it is (otherwise I would try, although I realize that other things should be removed as well, like the dialer program). The functioning of the tablet is not impaired in any way by this (as far as I can see);
- Gboard (an app from Google) apparently is not functioning properly: swiping does not work at all, although it is supposed to do so. In the standard AOSP keyboard however swiping is no problem.
I'm waiting for the Bluetooth to work in order to flash this Rom!!
JoostA said:
Nice to see you cover this development as well. Maybe it is possible to join forces with Valera1978 ? I will try this build as well of course and report on issues. Hopefully it is not too much of a problem to run it on a T580 (without SIM).
Click to expand...
Click to collapse
I also have the T580. But this is my wife's tablet, and I can not take it up for a week for develop. But as soon as there is a stable version for the T585, I'll take it for a short time (1-2 days) and fix it too.
JoostA said:
@Valera1978. Your ROM performs very well (it is fast too !).
As expected, it runs well on a SM-T580 as well, you can just skip the SIM pat in set-up with no problem at all.
Of course it is still work in progress, so bugs to be expected. However I concluded that sound is working properly ,which is fantastic.
In your opening post you said GPS is not working, but I think it is working (Navmii and Google maps anyway).
I did not find many problems, but I can report some:
- It is a bit strange that in setup you are being asked to put back a backup from the cloud while you have not been able (yet) to set up your internet connection). However this provlem can be circumvented easily by just answering that you want to set-up as a new device. In the next screen you set-up your internet connection and then you go can go back and choose to restore from backup (which works flawlessly);
- External SD card cannot be formatted as "internal storage", which is a pity, because I use a brand new 128 Gb SD card (this works in the stock ROM, so I think it is some kind of a bug);
- On an SM-t580 there is of course no SIM. In the lock screen I now see "no service". On a post to Tank0412 Oves786 suggests to remove an APK, but I wouldn't know which one it is (otherwise I would try, although I realize that other things should be removed as well, like the dialer program). The functioning of the tablet is not impaired in any way by this (as far as I can see);
- Gboard (an app from Google) apparently is not functioning properly: swiping does not work at all, although it is supposed to do so. In the standard AOSP keyboard however swiping is no problem.
Click to expand...
Click to collapse
"In your opening post you said GPS is not working" - on T580 - this is another key in kernel. On T585 - i'm working with it. Yesterday I had find reason - if I'm manually (via adb) running modem - I see baseband, imei, and gps starting work too. At least now I known - problem in ramdisk, vendor and device config is correct for ril.
"back a backup from the cloud" - this is gapps bug, as I remember wizard ask about backup before you enter your google account.
"External SD card" - strange, will check, T580-585 should be same logic.
"On an SM-T580 there is of course no SIM" - not enough remove apps, need build firmware without telephony. Because settings also included changes in framework.
"Gboard (an app from Google) apparently " - will check, but later, primary problems is first.
Jamess27 said:
I'm waiting for the Bluetooth to work in order to flash this Rom!!
Click to expand...
Click to collapse
I'll check after ril, but I'm on 90% sure - it's the same problem.
Thank you for this, for an Alpha its very good. Its installed now on my T580 . The kernel is Permissive and can't be switched to Enforcing, is this something we could have in a future release, a kernel with the ability to change?
Amazing work, congratulations for bringing this to us, its a game changer for the T585/580. When I look at my Ti Back-up for any missing apps and see all that Samsung bloat-ware and Knox related stuff...well how good to see them gone
btb55 said:
Thank you for this, for an Alpha its very good. Its installed now on my T580 . The kernel is Permissive and can't be switched to Enforcing, is this something we could have in a future release, a kernel with the ability to change?
Amazing work, congratulations for bringing this to us, its a game changer for the T585/580. When I look at my Ti Back-up for any missing apps and see all that Samsung bloat-ware and Knox related stuff...well how good to see them gone
Click to expand...
Click to collapse
basically its not an issue now
first let him fix all bugs left or just make it stable with fixing ril and other network stuffs
Format SD card as Internal memory
@Valera1978. Maybe just nonsense what I discovered but maybe it is not, so I think I should share this.
I discovered Samsung S7/S7 edge suffer from the same problem that it is not possible to format their SD card as internal (which however is possible in the original Samsung sofware for the SM-T580/ 585 as I mentioned earlier).
So I thought it would be a nice experiment to try the solution I found in:
http://www.modaco.com/news/android/...e-adoptable-storage-on-your-s7-s7-edge-r1632/
After having read that, what I did was no more then simply issuing the commands:
adb shell
sm list-disks
This returned:
"CANNOT LINK EXECUTABLE "app_process": "/sbin/libcutils.so" is 64-bit instead of 32-bit
Aborted"
I now suspect - without really knowing why or how - that maybe a 64 bit module (or maybe the reverse: some 32 bit module) is interfering some way with the formatting of the disk as internal.
This is not the biggest of problems of course, this build already performs really nice and smooth anyway. However of course I do hope it proves to be is a lead to the solution.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions just in case
Instructions
1. Install twrp
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (may be not need, but just in case)
4. Full wipe all
5. Flash firmware and gapps
Known Issues:
- speakers during calls
- camera can be buggy, it's work, but some errors in logcat in isp module
Links:
LineageOS Builds:
7. 20191024: october security patch: https://drive.google.com/file/d/1FoFLsVjkaUBnLe71_-4nW7oq_6QG27h5/view?usp=sharing
6. 20190913: update to new stock pie kernel T820XXU3CSH9, almost all proprietary files from pie stock: https://drive.google.com/file/d/1cXFKfrAje8Tie026dbGEHnRUo-II7NM4/view?usp=sharing
if you not updated the tablet and use old bootloader - for correct work fingerprint\sensors after install lineage you need install the next file: https://drive.google.com/file/d/1wtUzxrkAct7xnmJLXn9Y5t9sfXwpHANl/view?usp=sharing
5. 20190811: august security patch: https://drive.google.com/file/d/1MRkZGTpfrH2STpmfdcg5cEu6af72gsqE/view?usp=sharing
4. 20190707: july security patch: https://drive.google.com/file/d/1NzvOQqWUqSYPfFLxDLlcaUAIShualW-8/view?usp=sharing
3. 20190518: https://drive.google.com/file/d/16bHi7XCqL7whO2uIIgorA4qu5RsM9Xlf/view?usp=sharing
2. 20190331: update keystore, if you update from version before - in recovery remove /data/system/locksettings.db: https://drive.google.com/file/d/1QoHtbGfFmwxa8uT2hjvLdg7lkMi6EquT/view?usp=sharing
1. 20190327: https://drive.google.com/file/d/1byY1NMLVwELRC-1FGrBPYQ3FN8zt1-Bm/view?usp=sharing
TWRP:
Use twrp from https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
or my repack:
- from recovery: https://drive.google.com/file/d/1ZgEnVFeFoKk47ZB_XqBOUbmy38rj7oLw/view?usp=sharing
- from odin: https://drive.google.com/file/d/1uQpLmTCyPqu6usevrqCgRrqQGipL5lEP/view?usp=sharing
Gapps:
http://opengapps.org
Platform: ARM64
Android: 9.0
Variant: any, usually I'm using micro or nano
P.s. gapps wizard still buggy in lineage, it can crash
Sources:
Sources: https://github.com/Lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8996
Device: https://github.com/Valera1978/android_device_samsung_gts3llte
Vendor: https://github.com/Valera1978/android_vendor_samsung_gts3llte
Thanks
Thanks to LineageOS team
Thanks to my good friend @bonuzzz
Hi all
Finally I got tab s3 wifi version. And now I have both tablets.
Lte and wifi versions almost the same. Diffs only in radio, gps config and sensors.
Tested for a few days - it's fast and stable.
Yes, we still have a some problems, like camera crashes in logs, speakers (not rotate), may be some small issues.
Many thanks! Will flash this over the weekend and do some testing.
I havent flashed this yet but....I love you! Im stuck with this tablet, And theres been basically no other roms for the wifi model, And the stock rom is so slow its unbearable....Your the best!!!!!
Edit: It flashed perfectly, And...It actually responds to taps ect....Thank you!!!!!!!
You are more than awesome! Thanks for this.
I hope it is not rude to ask, but is there any chance, that you could provide. HAVOC OS for this device?
Thanks in advance.
Omg i was checking this page so often for this thread to appear. I love you Downloading and testing right now.
Okay guys, important to know for everyone. You have to install the repack recovery by valera1987. The ashyx recovery does not encrypt data storage!!!
The rom seems to work smooth and fast so far, but i recognised two annoying issues.
At first the rom sometimes reboots directly after unlocking the device via pin.
Secondly, it is not possible to write something with the spen, because the touch function is not disabled, if the spen is in use.
If i try to write something via lecture notes and i touch the display, the whole text disappears.
I hope this can be fixed somehow.
Thanks in advance for your great work!
Regards
Thanks for your effort.
Be aware that spen is stop working after you turn off your screen while using the spen.
Stogie87 said:
At first the rom sometimes reboots directly after unlocking the device via pin.
Click to expand...
Click to collapse
Luckily I don't have this issue.
Stogie87 said:
Secondly, it is not possible to write something with the spen, because the touch function is not disabled, if the spen is in use.
If i try to write something via lecture notes and i touch the display, the whole text disappears.
Click to expand...
Click to collapse
I use LectureNotes myself and have the same issue. You can rest your palm while writing, but as soon as you move your palm the line you are drawing in that moment will be canceled. If this issue is fixed this ROM is absolutly perfect for me.
Fatso said:
Be aware that spen is stop working after you turn off your screen while using the spen.
Click to expand...
Click to collapse
Wierd, I don't have this problem. Hopefully it stays this way...
@Valera1978:
I use a 128GB Samsung micro SD card in my tablet. For some wierd reason it gets recognized as 256GB in this ROM (No problems on PC or old ROMs). It marks half of it as in use though, so no real problem (e.g. 5 GB of 128 GB are in use, it shows 133 GB of 256 GB are in use). SD card is formatted as internal storage for tablet only. Thank you so much for your work!
For anyone interested in using this ROM without GAPPs: I have no issues so far!
Btw. is there any chance to add xbox controller support?
Reboots - this is keystore problem. Time ago I used softkeystore from samsung (from stock firmware) - now back to normal kestore\gatekeeper. Test version working well. Later today I'll rebuild both 820/825 versions.
About s-pen - need check, how to implement this.
Stogie87 said:
The rom seems to work smooth and fast so far, but i recognised two annoying issues.
At first the rom sometimes reboots directly after unlocking the device via pin.
Secondly, it is not possible to write something with the spen, because the touch function is not disabled, if the spen is in use.
If i try to write something via lecture notes and i touch the display, the whole text disappears.
I hope this can be fixed somehow.
Thanks in advance for your great work!
Regards
Click to expand...
Click to collapse
Valera1978 said:
Reboots - this is keystore problem. Time ago I used softkeystore from samsung (from stock firmware) - now back to normal kestore\gatekeeper. Test version working well. Later today I'll rebuild both 820/825 versions.
About s-pen - need check, how to implement this.
Click to expand...
Click to collapse
Maybe you can find something on github for galaxy note 10.1 2014 (SM-P600) for this, because they implemented this somehow for oreo on my old device.
Checking in kernel - it's support in code and defconfig. But it's old revision. I'll update code from another samsung tablet to new one.
But right now we have otg issues - need check it first. My otg-type-c cable had arrive yesterday.
In any way I have ps4/one (old)/oneX (new) joysticks - i'll check.
Stogie87 said:
Btw. is there any chance to add xbox controller support?
Click to expand...
Click to collapse
Valera1978 said:
Checking in kernel - it's support in code and defconfig. But it's old revision. I'll update code from another samsung tablet to new one.
But right now we have otg issues - need check it first. My otg-type-c cable had arrive yesterday.
In any way I have ps4/one (old)/oneX (new) joysticks - i'll check.
Click to expand...
Click to collapse
Cool, thanks a lot.
I have also some issues to get viper4android driver inatalled on this rom. Can you include busybix into your kernel?
And maybe you know the app spen command, which is a perfect alternative to the missing command menu for the pen, if you press the pen button. The only problem is, that this app needs selinux on permissive. Maybe you can set your kernel by default to this.
thanks....we appreciate your efforts
i've noticed that using ms note this problem occurs, i don't have other apps with this functionality. but, also i don't have idea how to install samsung notes. this will be the best solution.
please how to root this release ?
kokran said:
please how to root this release ?
Click to expand...
Click to collapse
Magisk v19.0 works fine for me.
ROM works fine with my T820.
Only issues with camera: Switching from front/back-camera takes about 20 seconds.
Stock-camera, opencamera, Camera-zoom-fx ... same issue
... but camera isnt very important for me ...
Hi Guys !
In this early stage we found out how to boot android Q (Erfan GSI) with a vendor/boot combo and some patches.
How to : file : https://mirrors.lolinet.com/firmware/gsi/
1. flash Q vendor/ boot combo. In fact it's latest Mokee vendor + los16 boot : https://androidfilehost.com/?fid=1395089523397937735
2. system.img (a only)
3. flash Permissiver_v2
4. flash FixZygote
5. boot
NOTE :
1. do select your SIM when it pops up the first time ! Calls should work and LTE should show up
2. a reboot messes up your APN and will disable LTE again - making a new APN will fix the LTE
What's working :
* BT working and can be toggled on/off
* NFC seems to be working but can not be toggled OFF - to be tested if it's indeed working when ON
* calls but laggy dialer - volume can be adjusted when calling
* LTE - but a reboot will disable LTE again - restoring to default or making a new APN and reboot will enable LTE again
* file manager works but very laggy sometimes
* stereo speakers
* magisk 19.0 (special one) root ok but manager crashes
What's NOT :
* wifi
* playstore : to be looked into / someone could login others couldn't...
* camera
.....
So for those who want to test, give it a try.
Perhaps some future patches will help on further development.
Thnx @yarecco
Man, is it possible to boot latest build? Or make data and some more works on April build from your guide?
HYPECUT said:
Man, is it possible to boot latest build? Or make data and some more works on April build from your guide?
Click to expand...
Click to collapse
It's not possible to get a fully functioning Android Q until Phh officially supports it into his AOSP builds, or we get a Pie vendor/kernel.
SOME MINOR UPDATE INFO ON BOOTING LATEST GSI 10
Latest GSI don't need additional files (like Permissiver or FixZygote) to boot properly. It's fairly easy to setup your phone.
Some files you might need :
1. vendor : Speedy A7 Vendor_Boot(Baddar RC1.1 kernel) Combo
2. GSI's : take a peek here :
https://sourceforge.net/projects/expressluke-gsis/files/
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
https://github.com/phhusson/treble_experimentations/tags
https://sourceforge.net/projects/developerluke-roms/files/GSIs/
...
3. gapps : https://sourceforge.net/projects/opengapps/files/arm64/beta/20191114/ tip : take the pico one otherwise, depending gsi size, you might have to resize system (error70 when gapps are flashed)
4. magisk : https://sourceforge.net/projects/developerluke-roms/files/phh-magisk/
5. button reverse if needed (flash in magisk) : A2017X_swap_button_Module_unity_key
....
Installation : starting from Pie
1. wipe system, vendor, data, cache
2. flash speedy vendor combo
3. flash rom img to system
4. boot phone ( if red light, no worries, just press power to boot ) (also no worries when no OS seems to be installed when trying to boot out of twrp)
5. reboot twrp
6. flash pico gapps (some gsi like PE10 have gapps included) and magisk 20.2 (note : if you get a gapps error70, you'll have to resize system after flashing the img)
7. reboot and enjoy
BUGS :
Have tested some gsi now and only major bug is the NFC.
Depending on the gsi you might have a non working camera, fp too.
After testing some gsi, imo these are worth a try : with working camera, wifi, calls, fp, BT, hotspot
* HAVOC 3.0 : https://sourceforge.net/projects/expressluke-gsis/files/HavocOS/Ten/
* PE10 : https://sourceforge.net/projects/expressluke-gsis/files/PixelExperience/Ten/
* AOSP 10.0 v204 : https://github.com/phhusson/treble_experimentations/releases/tag/v204
* EvolutionX 3.3 : https://sourceforge.net/projects/expressluke-gsis/files/EvolutionX/Ten/
Feel free to comment on your personal use.
Ofc GSI are still to improve but worth a try.....till we have our own device specific Q roms
thnx @atakan33
why not using Speedy latest Combo with kernel RC1.2 ?
https://androidfilehost.com/?fid=6006931924117923540
Temporay fix for the CAMERA on LOS17
Just flash this in twrp ( do mount system ) : A2017X_LOS17_GSI_camera_fix
or manual fix :
search system/etc/ld.config.27.txt
change : namespace.vndk.links = system,default to namespace.vndk.links = system,default,runtime
thnx @AndyYan @phhusson
Hi raystef66,
I installed this a couple of hours ago. Installation was a breeze following your guide. I had a play services error but a wipe of data/cache fixed it. I installed the aosp 10 version. Bluetooth seems to not be working for me, it connects but does not play sound thru B/T speaker and WIFI doesn't auto connect after reboots. Everything else seems to work pretty well (I didn't try NFC) but the camera worked for me without flashing anything else. Really nice job, especially for first go round at 10.
Thanks a million.
tlarm said:
Hi raystef66,
I installed this a couple of hours ago. Installation was a breeze following your guide. I had a play services error but a wipe of data/cache fixed it. I installed the aosp 10 version. Bluetooth seems to not be working for me, it connects but does not play sound thru B/T speaker and WIFI doesn't auto connect after reboots. Everything else seems to work pretty well (I didn't try NFC) but the camera worked for me without flashing anything else. Really nice job, especially for first go round at 10.
Thanks a million.
Click to expand...
Click to collapse
can you log on matlog app while connecting and playing media and do adb shell dumpsys media.audio_policy and send it for txt
cant boot
hello
i installed the spuddy combo , gsi from havoc A only after wiping.
but the phone not booting just stack on the logo.
any suggestions?
ty
david
atakan33 said:
can you log on matlog app while connecting and playing media and do adb shell dumpsys media.audio_policy and send it for txt
Click to expand...
Click to collapse
Okay, I think I have the log, it's 7,000+ words long, do you want that posted on here?
tlarm said:
Okay, I think I have the log, it's 7,000+ words long, do you want that posted on here?
Click to expand...
Click to collapse
yes send it for txt file
atakan33 said:
yes send it for txt file
Click to expand...
Click to collapse
hopefully this worked
tlarm said:
hopefully this worked
Click to expand...
Click to collapse
p.s. prob should have noted I had flashed PE10 instead of the asop 10 I tried yesterday but the result is the same.
tlarm said:
hopefully this worked
Click to expand...
Click to collapse
one more log needed we need log from using matlog ( from playstore) .Send log while music playing on bt speaker .
atakan33 said:
one more log needed we need log from using matlog ( from playstore) .Send log while music playing on bt speaker .
Click to expand...
Click to collapse
That was while I was attempting to play on bt speaker. It connected but no sound came from bt speaker, intermittently the sound would come out of the phone speaker but for only a one second and then no sound at all.
tlarm said:
That was while I was attempting to play on bt speaker. It connected but no sound came from bt speaker, intermittently the sound would come out of the phone speaker but for only a one second and then no sound at all.
Click to expand...
Click to collapse
Here's from the matlog app. I had to zip the file because the txt file was to large to upload. This is prob more info than you asked for but wasn't sure how to do only adb shell dumpsys media.audio_policy from the app.
tlarm said:
Here's from the matlog app. I had to zip the file because the txt file was to large to upload. This is prob more info than you asked for but wasn't sure how to do only adb shell dumpsys media.audio_policy from the app.
Click to expand...
Click to collapse
thanks .Thats enough
Apart from unstable NFC in GSIs I've tried (Havoc 3.0 and EvolutionX 3.3) sometimes UI hangs and for now they are not as smooth as LiquidRemix (PIE) which is my favourite GSI (I'm using it till now).
In Evolution I've found option to wake phone by double tap which is something new in GSIs I've tried so far. Also Evolution comes with GApps so you don't have to flash it separately and worry about system partition being too small. Overall it's all going in good direction
^^Stable enough for daily use?
I'm really digging the battery life on android 10 on the 7t. I've had the set up in my sig for well over a year now. It's ok and works well but battery life could be better (esp considering new battery installed earlier this year).
Edit: I'll answer my own question. No. The nfc keeps cycling on/off. I think that's also what's introducing significant lag.
Hopefully this can be resolved to give this device a bit more life.
Nice, I wasn't sure if the Axon 7 will get some Q love.
Will try some of these ROMS.
Thanks OP