Hi Guys !
In this early stage we found out how to boot android Q (Erfan GSI) with a vendor/boot combo and some patches.
How to : file : https://mirrors.lolinet.com/firmware/gsi/
1. flash Q vendor/ boot combo. In fact it's latest Mokee vendor + los16 boot : https://androidfilehost.com/?fid=1395089523397937735
2. system.img (a only)
3. flash Permissiver_v2
4. flash FixZygote
5. boot
NOTE :
1. do select your SIM when it pops up the first time ! Calls should work and LTE should show up
2. a reboot messes up your APN and will disable LTE again - making a new APN will fix the LTE
What's working :
* BT working and can be toggled on/off
* NFC seems to be working but can not be toggled OFF - to be tested if it's indeed working when ON
* calls but laggy dialer - volume can be adjusted when calling
* LTE - but a reboot will disable LTE again - restoring to default or making a new APN and reboot will enable LTE again
* file manager works but very laggy sometimes
* stereo speakers
* magisk 19.0 (special one) root ok but manager crashes
What's NOT :
* wifi
* playstore : to be looked into / someone could login others couldn't...
* camera
.....
So for those who want to test, give it a try.
Perhaps some future patches will help on further development.
Thnx @yarecco
Man, is it possible to boot latest build? Or make data and some more works on April build from your guide?
HYPECUT said:
Man, is it possible to boot latest build? Or make data and some more works on April build from your guide?
Click to expand...
Click to collapse
It's not possible to get a fully functioning Android Q until Phh officially supports it into his AOSP builds, or we get a Pie vendor/kernel.
SOME MINOR UPDATE INFO ON BOOTING LATEST GSI 10
Latest GSI don't need additional files (like Permissiver or FixZygote) to boot properly. It's fairly easy to setup your phone.
Some files you might need :
1. vendor : Speedy A7 Vendor_Boot(Baddar RC1.1 kernel) Combo
2. GSI's : take a peek here :
https://sourceforge.net/projects/expressluke-gsis/files/
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
https://github.com/phhusson/treble_experimentations/tags
https://sourceforge.net/projects/developerluke-roms/files/GSIs/
...
3. gapps : https://sourceforge.net/projects/opengapps/files/arm64/beta/20191114/ tip : take the pico one otherwise, depending gsi size, you might have to resize system (error70 when gapps are flashed)
4. magisk : https://sourceforge.net/projects/developerluke-roms/files/phh-magisk/
5. button reverse if needed (flash in magisk) : A2017X_swap_button_Module_unity_key
....
Installation : starting from Pie
1. wipe system, vendor, data, cache
2. flash speedy vendor combo
3. flash rom img to system
4. boot phone ( if red light, no worries, just press power to boot ) (also no worries when no OS seems to be installed when trying to boot out of twrp)
5. reboot twrp
6. flash pico gapps (some gsi like PE10 have gapps included) and magisk 20.2 (note : if you get a gapps error70, you'll have to resize system after flashing the img)
7. reboot and enjoy
BUGS :
Have tested some gsi now and only major bug is the NFC.
Depending on the gsi you might have a non working camera, fp too.
After testing some gsi, imo these are worth a try : with working camera, wifi, calls, fp, BT, hotspot
* HAVOC 3.0 : https://sourceforge.net/projects/expressluke-gsis/files/HavocOS/Ten/
* PE10 : https://sourceforge.net/projects/expressluke-gsis/files/PixelExperience/Ten/
* AOSP 10.0 v204 : https://github.com/phhusson/treble_experimentations/releases/tag/v204
* EvolutionX 3.3 : https://sourceforge.net/projects/expressluke-gsis/files/EvolutionX/Ten/
Feel free to comment on your personal use.
Ofc GSI are still to improve but worth a try.....till we have our own device specific Q roms
thnx @atakan33
why not using Speedy latest Combo with kernel RC1.2 ?
https://androidfilehost.com/?fid=6006931924117923540
Temporay fix for the CAMERA on LOS17
Just flash this in twrp ( do mount system ) : A2017X_LOS17_GSI_camera_fix
or manual fix :
search system/etc/ld.config.27.txt
change : namespace.vndk.links = system,default to namespace.vndk.links = system,default,runtime
thnx @AndyYan @phhusson
Hi raystef66,
I installed this a couple of hours ago. Installation was a breeze following your guide. I had a play services error but a wipe of data/cache fixed it. I installed the aosp 10 version. Bluetooth seems to not be working for me, it connects but does not play sound thru B/T speaker and WIFI doesn't auto connect after reboots. Everything else seems to work pretty well (I didn't try NFC) but the camera worked for me without flashing anything else. Really nice job, especially for first go round at 10.
Thanks a million.
tlarm said:
Hi raystef66,
I installed this a couple of hours ago. Installation was a breeze following your guide. I had a play services error but a wipe of data/cache fixed it. I installed the aosp 10 version. Bluetooth seems to not be working for me, it connects but does not play sound thru B/T speaker and WIFI doesn't auto connect after reboots. Everything else seems to work pretty well (I didn't try NFC) but the camera worked for me without flashing anything else. Really nice job, especially for first go round at 10.
Thanks a million.
Click to expand...
Click to collapse
can you log on matlog app while connecting and playing media and do adb shell dumpsys media.audio_policy and send it for txt
cant boot
hello
i installed the spuddy combo , gsi from havoc A only after wiping.
but the phone not booting just stack on the logo.
any suggestions?
ty
david
atakan33 said:
can you log on matlog app while connecting and playing media and do adb shell dumpsys media.audio_policy and send it for txt
Click to expand...
Click to collapse
Okay, I think I have the log, it's 7,000+ words long, do you want that posted on here?
tlarm said:
Okay, I think I have the log, it's 7,000+ words long, do you want that posted on here?
Click to expand...
Click to collapse
yes send it for txt file
atakan33 said:
yes send it for txt file
Click to expand...
Click to collapse
hopefully this worked
tlarm said:
hopefully this worked
Click to expand...
Click to collapse
p.s. prob should have noted I had flashed PE10 instead of the asop 10 I tried yesterday but the result is the same.
tlarm said:
hopefully this worked
Click to expand...
Click to collapse
one more log needed we need log from using matlog ( from playstore) .Send log while music playing on bt speaker .
atakan33 said:
one more log needed we need log from using matlog ( from playstore) .Send log while music playing on bt speaker .
Click to expand...
Click to collapse
That was while I was attempting to play on bt speaker. It connected but no sound came from bt speaker, intermittently the sound would come out of the phone speaker but for only a one second and then no sound at all.
tlarm said:
That was while I was attempting to play on bt speaker. It connected but no sound came from bt speaker, intermittently the sound would come out of the phone speaker but for only a one second and then no sound at all.
Click to expand...
Click to collapse
Here's from the matlog app. I had to zip the file because the txt file was to large to upload. This is prob more info than you asked for but wasn't sure how to do only adb shell dumpsys media.audio_policy from the app.
tlarm said:
Here's from the matlog app. I had to zip the file because the txt file was to large to upload. This is prob more info than you asked for but wasn't sure how to do only adb shell dumpsys media.audio_policy from the app.
Click to expand...
Click to collapse
thanks .Thats enough
Apart from unstable NFC in GSIs I've tried (Havoc 3.0 and EvolutionX 3.3) sometimes UI hangs and for now they are not as smooth as LiquidRemix (PIE) which is my favourite GSI (I'm using it till now).
In Evolution I've found option to wake phone by double tap which is something new in GSIs I've tried so far. Also Evolution comes with GApps so you don't have to flash it separately and worry about system partition being too small. Overall it's all going in good direction
^^Stable enough for daily use?
I'm really digging the battery life on android 10 on the 7t. I've had the set up in my sig for well over a year now. It's ok and works well but battery life could be better (esp considering new battery installed earlier this year).
Edit: I'll answer my own question. No. The nfc keeps cycling on/off. I think that's also what's introducing significant lag.
Hopefully this can be resolved to give this device a bit more life.
Nice, I wasn't sure if the Axon 7 will get some Q love.
Will try some of these ROMS.
Thanks OP
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
------------THIS IS AN UNOFFICIAL UNSUPPORTED BUILD-----------
This is my attempt at porting CyanogenMod 11 to the Galaxy Tab 4 10.1. I use a SM-T530NU, so that is the only device I have tested.
Any other device variations have not been tested and are at your own risk. I will not be able to support other variations as I don't own them for testing.
Special thanks to MetaIIica - I have been using his Alpha build of PAC-ROM KitKat since December. I studied the code for that, along with stock and some other ROMs before starting this port. This is my first time doing any work with Android, so I'm not sure if I'm technically doing things correctly or not.
I know CyanogenMod 12 is under development already, but I have decided to do a CM11 based build in hopes of a making a stable daily driver offering. I have fixed many of the issues present that were present in the PAC-ROM build. They can probably be backported to PAC-ROM easily if its built with my tree, but I prefer the plain CM-based offering myself.
You may get the source of my changes for this ROM on my github. If you'd like to help and submit a patch, feel free to open a pull request. You will of course be credited accordingly.
See below for instructions, what's working, and issues I fixed over the PAC-ROM Alpha.
For any bug reports or feature requests, please use the appropriate tabs at the top of the thread. Please include as much information as possible and if possible a logcat or other debug information in the case of bugs. Requests for supporting other device variations will not be honored - sorry,
Feedback and constructive criticism is always appreciated. I hope you enjoy using the ROM; if you use the ROM, please consider leaving a thanks, rating, and/or review
CURRENT VERSION:
DOWNLOAD LINK - 04/26/2015
OLD VERSIONS:
DOWNLOAD LINK - 04/20/2015
DOWNLOAD LINK - 04/19/2015
DOWNLOAD LINK - 04/07/2015
DOWNLOAD LINK - 04/05/2015
DOWNLOAD LINK - 04/04/2015
DOWNLOAD LINK - 04/03/2015
DOWNLOAD LINK - 03/29/2015
DOWNLOAD LINK - 03/24/2015
DOWNLOAD LINK - 03/23/2015
DOWNLOAD LINK - 03/22/2015
INSTRUCTIONS
- Install PhilZ Touch Recovery (recommended)
- Copy CM11 & GAPPS (Optional) ZIPs to your SDCard
- Boot into Recovery
- Do "Clean to Install a New ROM" (FULL WIPE REQUIRED INCLUDING SYSTEM, NOT JUST DATA/CACHE - even if coming from another CM-based ROM, as my device tree is different)
- Flash CM11 ZIP
- Flash GApps zip from SDCard
- Reboot
UPGRADING
-In general, you should be able to just flash over the previous build, but if you encounter any weird issues please clean using the steps above
Working that I've tested:
Audio: Speakers, Headphones, Bluetooth
Bluetooth
CIFS/NFS (Network File Systems - see notes below)
Front Camera
GPS
IR Blaster [SM-T530NU Only]
Magnetic Cover Sleep/Wake
MTP
Rear Camera
USB OTG
Video (w/ Hardware Decoding)
WiFi (2.4ghz & 5ghz)
NOTE ON BUTTONS: This ROM is configured to use the hardware buttons-- so you won't see the software buttons taking up space at the bottom of the screen, as they are disabled. This is not a bug. Use the hardware buttons, as they are the same. If you really want the software buttons for some reason, edit /system/build.prop, change qemu.hw.mainkeys to 0, save, and reboot. If you map the menu button to a long press of another button, some apps such as TitaniumBackup will count this as a hardware key and hide their soft menu button - but only after a reboot.
NOTE ON CIFS/NFS: Many of the mounting utilities on the play store are outdated and broken due to changes in the linux kernel. For best luck, mount using the command line. For CIFS, you can tweak CIFSManager into working - see this thread
CHANGELOG:
[04/26/2015]
-Fix reading MAC address from EFS
-Fix suspending charging while the device is off (special thanks to @sub77 for pointing out the right config option)
[04/20/2015]
-Enable physical keyboard menu for use with BT/USB keyboards. Auto hides soft keyboard & allows selection of layout.
[04/19/2015]
-Add support for magnetic cover sleep/wake
[04/07/2015]
-Roll back to using the Non-CAF Display HAL Fixes SurfaceFlinger constantly eating 100% CPU
[04/05/2015]
-Fix issues with reconnecting Bluetooth Devices after a reboot (if upgrading, break pairing and re-pair all devices)
-Fix mounting /efs
-Fix persistant Bluetooth MAC Address
[04/04/2015]
-Fix issues with detecting whether or not the device has a hardware menu button.
[04/03/2015]
-Fix the Time Service, allowing Date & Time to persist during a reboot without a wifi connection. Special Thanks: sub77 for pointing the discussion in the thread in the right direciton on this
[03/29/2015]
-Support Bluetooth Audio & AVRCP
-Support Consumer IR [SM-T530NU Only]
-Upgrade Display HAL to CAF Version
-Misc Bugfixes and Cleanup
[03/24/2015]
-Fix Missing Sensors HAL (Fixes Autorotate regression from the last build)
-Behind the scenes work for IR (need someone to test on plain 530 as IR is NU only). Does not actually work yet because its using the stub HAL, but the kernel drivers are loaded, and the IR service runs.
[03/23/2015]
-Fix lighting issues with rear camera
-Reduce some dependencies on vendor libs.
[03/22/2015]
-Added support for Front/Back Camera
-Added support CIFS/NFS
-Fixed 5 ghz WiFi
-Fixed Duplicate VSYNC spam in logcat
-Fixed issues with video decoding (YouTube HD, MXPlayer HW+ Video, etc)
-Fixed various Bluetooth issues
-Fixed wallpaper issues with Trebuchet
-Identify device correctly as MSM8226 chipset
-Use Hardware Buttons by Default
XDA:DevDB Information
CyanogenMod 11 Unofficial [TM-530NU], ROM for the Samsung Galaxy Tab 4
Contributors
starlightknight
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2015-03-29
Beta Release Date: 2015-03-22
Created 2015-03-29
Last Updated 2015-04-25
Congratulations ! :good:
Nice ROM, it installed fine on my T530 will test some more, thanks for the hard work
I got this installed but the back button and recents button didn't work at all. Its a fast rom though but it would be nice if it was a barebones CyanogenMod without the Pac Rom extras installed too.
Time for a new test, i'll test it in my t530 and report back the results.
Sent from my GT-I9300 using XDA Free mobile app
steve30x said:
I got this installed but the back button and recents button didn't work at all. Its a fast rom though but it would be nice if it was a barebones CyanogenMod without the Pac Rom extras installed too.
Click to expand...
Click to collapse
It is a pure Cyanogenmod without the Pac extras. If you're seeing them, make sure you did a full wipe before flashing as noted in the original post - you may have remnants of PAC-ROM in /system. The best way is to use PhilZ option to "Clean to Install a new ROM" as that wipes everything correctly. That could also be causing your issues with the back button as well. I completely rebuilt the device tree for this rom over the pac build, as that was based on MSM8974 when this is an MSM8226 device. If a full wipe wasn't done, you have stuff for the other device tree in /system that will mess things up. If the issue persists after a full wipe, please let me know what varient of 530 you're using, and pastebin a logcat of what happens when you press the back or recent events buttons.
starlightknight said:
It is a pure Cyanogenmod without the Pac extras. If you're seeing them, make sure you did a full wipe before flashing as noted in the original post - you may have remnants of PAC-ROM in /system. The best way is to use PhilZ option to "Clean to Install a new ROM" as that wipes everything correctly. That could also be causing your issues with the back button as well. I completely rebuilt the device tree for this rom over the pac build, as that was based on MSM8974 when this is an MSM8226 device. If a full wipe wasn't done, you have stuff for the other device tree in /system that will mess things up. If the issue persists after a full wipe, please let me know what varient of 530 you're using, and pastebin a logcat of what happens when you press the back or recent events buttons.
Click to expand...
Click to collapse
I always completely wipe everything before installing a new rom. Never wiping the tablet before installing a new rom might cause problems. I no longer have the rom installed. I will install it again and see if it was just a flike that it didnt work properly the last time. I also have Philz recovery installed because its the only one that has full brightness on the screen.
Simply great. Everything i need works great. Finally a kitkat aosp rom that given me everything i need. Flashed in TWRP on a t530 (wifi only) and running perfectly fine. Good job mate. If you want me to test anything on t530 just tell me.
Btw, otg works, so my usb keyboard is working.
Otg works, YouTube and twitch.tv works, BT works, rotation works, camera works, xposed works, everything i have tested works
Sent from my GT-I9300 using XDA Free mobile app
pirulazul said:
Simply great. Everything i need works great. Finally a kitkat aosp rom that given me everything i need. Flashed in TWRP on a t530 (wifi only) and running perfectly fine. Good job mate. If you want me to test anything on t530 just tell me.
Btw, otg works, so my usb keyboard is working.
Otg works, YouTube and twitch.tv works, BT works, rotation works, camera works, xposed works, everything i have tested works
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks! Glad to hear that it is working well for you. I believe the only difference between the SM-T530 and the SM-T530NU is the the NU has an IR blaster, which I haven't actually enabled yet. I need to figure out how to test that because I never use it. After i do that and post a build with IR, it will be useful if you check and make sure it doesn't break the regular 530. Those two from what I can tell are vary similar, its more of any celluar varients that I would be worried about, because this is build for wifi only..
Let me know if you find anything broken
I got this to work properly. I have one question though. Is there a way to get youtube working without having all the other GAPPS rubbish installed. I noticed that the tablet got slower as soon as I installed GAPPS. The tablet flies along without GAPPS installed and I only want youtube working without all that other rubbish bogging down the tablet.
steve30x said:
I got this to work properly. I have one question though. Is there a way to get youtube working without having all the other GAPPS rubbish installed. I noticed that the tablet got slower as soon as I installed GAPPS. The tablet flies along without GAPPS installed and I only want youtube working without all that other rubbish bogging down the tablet.
Click to expand...
Click to collapse
Glad its working for you now
To be honest, I'm not sure - you could try copying the Youtube APK off of the device and then side-loading it on a fresh install without installing all of GAPPs, but I'm not sure if that will just prompt you to install all of them or not if you do that.
Are there particular use cases you are noticing are slower? I did not really notice any difference with or without GAPPs, other than the initial boot time as they were unpacked and installed. If there are particular situations that cause this, then we could dump some logs to see if there is something that could or needs to be optimized.
starlightknight said:
To be honest, I'm not sure - you could try copying the Youtube APK off of the device and then side-loading it on a fresh install without installing all of GAPPs, but I'm not sure if that will just prompt you to install all of them or not if you do that.
Click to expand...
Click to collapse
I have youtube backed up with all my other apps with Titanium Backup and when I try running youtube without GAPPS it fails and a popup states Youtube has failed to start (or something similar) and if I install the GAPPS I have which is older than the version that is needed it tells me that google needs to be updated. So then I update that and tried freezing the google apps I dont want or use but youtube fails.
starlightknight said:
Are there particular use cases you are noticing are slower? I did not really notice any difference with or without GAPPs, other than the initial boot time as they were unpacked and installed. If there are particular situations that cause this, then we could dump some logs to see if there is something that could or needs to be optimized.
Click to expand...
Click to collapse
The whole tablet is slightly slower with GAPPS installed. I've opened a gapps zip with WINRAR and removed some of what I dont want and only left whats needed for play store to run so it improved a bit.
Hi,
I didn't try it for now...
But thanks for the good work!!
For the Gapps, have you try PAGapps?
It has different package with a lot of options.
The smallest one should be around 136Mo. You can also remove some apk with a config file.
All other apps are available on Play Store...
Gustave17 said:
Hi,
I didn't try it for now...
But thanks for the good work!!
For the Gapps, have you try PAGapps?
It has different package with a lot of options.
The smallest one should be around 136Mo. You can also remove some apk with a config file.
All other apps are available on Play Store...
Click to expand...
Click to collapse
The GAPPS package I modded is only 76MB. Its just the bare essentials
steve30x said:
The GAPPS package I modded is only 76MB. Its just the bare essentials
Click to expand...
Click to collapse
Oh ok, so it's what we need...
Y
steve30x said:
I have youtube backed up with all my other apps with Titanium Backup and when I try running youtube without GAPPS it fails and a popup states Youtube has failed to start (or something similar) and if I install the GAPPS I have which is older than the version that is needed it tells me that google needs to be updated. So then I update that and tried freezing the google apps I dont want or use but youtube fails.
The whole tablet is slightly slower with GAPPS installed. I've opened a gapps zip with WINRAR and removed some of what I dont want and only left whats needed for play store to run so it improved a bit.
Click to expand...
Click to collapse
I used an aroma based gapps. You can install only what you need. About using YouTube without gapps, i dont know if tubemate could do the trick. Use aptoide to install it if you dont like play store. Here is the link for the aroma gapps: http://forum.xda-developers.com/showthread.php?t=2547250
Sent from my GT-I9300 using XDA Free mobile app
---------- Post added at 11:01 PM ---------- Previous post was at 10:45 PM ----------
Oh, forgot one thing, rear camera is too dark but frontal camera is fine.
Sent from my GT-I9300 using XDA Free mobile app
pirulazul said:
Oh, forgot one thing, rear camera is too dark but frontal camera is fine.
Click to expand...
Click to collapse
It has something to do with the lighting detection or some other initial initialization that I haven't figured out yet, but as a workaround if you toggle between camcorder mode and back it'll brighten up.
starlightknight said:
It has something to do with the lighting detection that I haven't figured out yet, but as a workaround if you toggle between camcorder mode and back it'll brighten up.
Click to expand...
Click to collapse
Tested and working fine. Is a nice workaround. I dont mind about this bug as I only use front camera for Skype and such things, but im glad this workaround is pretty easy and fast
Sent from my GT-I9300 using XDA Free mobile app
Hi Everyone,
I updated the original post with a new build. This build should fix the lighting issues with the rear camera the first time it is used. After I debugged the mode switching with logcat I was able to find out what the issue was. I also am working on reducing dependencies on vendor libs where possible by getting more of the modules that can be built from source building from source.
I've started exploring IR blaster support for NU users and I am continuing to look for a solution for bluetooth audio, but I don't have either yet. Stay tuned for future updates
If you already installed the ROM most times you should be able to flash over it, but if you see anything weird after, try wiping to confirm if its a bug or weirdness after upgrading (you can always nandroid before wiping if you're unsure and roll back if its not related to upgrading).
Please let me know if you find any issues. Include model number and if possible a logcat as well.
Enjoy!
Congrats starlightknight!
Anyone tried this on the SM-T530?
Always Read Description First Before Flashing!!!!
CM13 BlitzRom For K3 Note Release V3.0
This Rom Is Updated From V2.0:- http://www.needrom.com/download/cm13-20161116-blitzrom-unofficial-v2-0/
Note:-
Please Use This Twrp Recovery :- http://www.needrom.com/download/twrp-3-0-2-7-2/?
Firmware new build
- Fixed all sensor
- Fixed audio call issue
- Fixed Bluetooth connection
- Fixed Wifi drops
- All updates from Cyanogenmod (incl. security updates)
-Bluetooth Speker
-Added OC Kernel (Thanks Sandeep G)
Multi Language
Working
1.Ril
2.Camera
3.Wifi
4.4G On Both Sim
5.Bluetooth
6.Sound loudspeaker
7.Led
8.Dt2w
9.Faster Charging Added (Special Thanks To Sandeep Sethi)
10.Fixed Video Zoom
11.Added Blitz Kernel
Bugs (Haven't Found Any Bug)
You Tell Me
How to install :
1. Reboot recovery
2. Full wipe (data,system,cache dalvik)
3. Install Rom
4. Wait and after done install gapps (Arm64->6.0->Pico)
5. Done reboot
6. Enjoy
Credits:-
1.Ninad Patil (Me) For Porting This Rom
2.Sandeep Sethi for rom porting tutorial and work on Kernel
3.Mohan CM For Cm 13 rom
4.Venkat Pinnamani
5.Risma Ermaya
6.Team AMT
7.Sandeep G (Overlock Kernel)
8.Ankur Raj for video fix
9.Beta Testers
Links:-
1. Rom
2. Gapps (Select Open Gapps ARM64->6.0->Pico)
3.Video Zoom Patch For CM13 Blitz
Press The Thanks Button
Hey, I couldnt test it myself but on needrom there are comments that bluetooth audio streaming doesnt work. Could you test it and if needed fix it
my internal storage has been decreased to 1.0 GB from from 12 GB after installing this rom. Help me please.
My internal storage is not showing up in explorer... Help please
externus said:
Hey, I couldnt test it myself but on needrom there are comments that bluetooth audio streaming doesnt work. Could you test it and if needed fix it
Click to expand...
Click to collapse
Yes Bluetooth audio is not working...also unable to connect to internet using mobile internet...although phone connects to network and can call without any problems....i tried flashing modem ,after that was able to connect to internet using 2g...no 3g or 4 g on both sims....and finally no screen cast...rest everything works... camera n battery is great.
Regards
No thumbnails in Gallery, delete button hides on selecting multiple files some bugs in gallery can someone do a patch for this bug
---------- Post added at 01:09 PM ---------- Previous post was at 01:07 PM ----------
Battery performance in low, lags a lot. Battery drain quickly
Guys New Update COme Fixed All Bug Clean Flash This Rom Please
Thx. but android security patch October 6, in me it seems.
on November 6, It looks in the picture.
which one is correct?
Gapps include.
when new update sir
Contacts app doesn't seem to be able to detect contacts from the SIM card. They are not displayed at all....
I can't connect on 3g/4g on this one
Enviado do meu Lenovo K50a40 através de Tapatalk
zbrix said:
I can't connect on 3g/4g on this one
Enviado do meu Lenovo K50a40 através de Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/k3-note/general/fix-3g-4g-fix-k3-note-t3415579
zbrix said:
I can't connect on 3g/4g on this one
Enviado do meu Lenovo K50a40 através de Tapatalk
Click to expand...
Click to collapse
livgrave said:
http://forum.xda-developers.com/k3-note/general/fix-3g-4g-fix-k3-note-t3415579
Click to expand...
Click to collapse
Thanks my friend now working fine
blitzfire3 said:
Always Read Description First Before Flashing!!!!
CM13 BlitzRom For K3 Note Release V3.0
This Rom Is Updated From V2.0:- http://www.needrom.com/download/cm13-20161116-blitzrom-unofficial-v2-0/
Note:-
Please Use This Twrp Recovery :- http://www.needrom.com/download/twrp-3-0-2-7-2/
Firmware new build
- Fixed all sensor
- Fixed audio call issue
- Fixed Bluetooth connection
- Fixed Wifi drops
- All updates from Cyanogenmod (incl. security updates)
-Bluetooth Speker
-Added OC Kernel (Thanks Sandeep G)
Multi Language
Working
1.Ril
2.Camera
3.Wifi
4.4G On Both Sim
5.Bluetooth
6.Sound loudspeaker
7.Led
8.Dt2w
9.Faster Charging Added (Special Thanks To Sandeep Sethi)
Bugs (Haven't Found Any Bug)
You Tell Me
Known Issue :-
Youtube video zoom (For Fix Lock the screen and unlock. Thanks To Ankur Raj For the Fix)
How to install :
1. Reboot recovery
2. Full wipe (data,system,cache dalvik)
3. Install Rom
4. Wait and after done install gapps (Arm64->6.0->Pico)
5. Done reboot
6. Enjoy
Credits:-
1.Ninad Patil (Me) For Porting This Rom
2.Sandeep Sethi for rom porting tutorial and work on Kernel
3.Mohan CM For Cm 13 rom
4.Venkat Pinnamani
5.Risma Ermaya
6.Team AMT
7.Sandeep G (Overlock Kernel)
8.Ankur Raj for video fix
9.Beta Testers
Links:-
1. Rom
2. Gapps (Select Open Gapps ARM64->6.0->Pico)
Press The Thanks Button
Click to expand...
Click to collapse
Bugs
1. Many Sensors Not working (magnetometer, gyroscope,gravity sensor)
2. NVRAM errors must be fixed by the devloper (Even though we can fix them)
3. I have some issue with jio SIM (but it appears to be from the network's side)
4. CAn you please tell me what fast charging is (I dont feel it,My phone charges like a snail)
But the rom is very smooth and a Very very thanks for it.
Anunay.j said:
Bugs
1. Many Sensors Not working (magnetometer, gyroscope,gravity sensor)
2. NVRAM errors must be fixed by the devloper (Even though we can fix them)
3. I have some issue with jio SIM (but it appears to be from the network's side)
4. CAn you please tell me what fast charging is (I dont feel it,My phone charges like a snail)
But the rom is very smooth and a Very very thanks for it.
Click to expand...
Click to collapse
Gyroscope doesn't work that well for me, not even on VIBE ROMs, it's because it's not an actual gyroscope but rather a virtual gyroscope sensor reading that's made by combining readings from accelerator and compass. Rest of the sensors work just fine for me. I didn't even get the NVRAM error (if you are referring to the NVRAM error in the list of available Wifi networks). Fast charging works but only if you use proper cables. Original k3 note micro USB cable and adapter work just fine for me, 2 amps charging, you can measure the current with an app like Ampere, but an actual inline ampmeter is more precise of course. In either case charging works fast as well.
This ROM can glitch out sometimes, apps crash, but for the most part everything works OK. I thought I might go back to Lollipop ROMS, but then I tried this and I think I'll stick with it for a little while longer, see how it fares on the long run...
Rom is really wonderful. Clean ui and fast.
livgrave said:
Gyroscope doesn't work that well for me, not even on VIBE ROMs, it's because it's not an actual gyroscope but rather a virtual gyroscope sensor reading that's made by combining readings from accelerator and compass. Rest of the sensors work just fine for me. I didn't even get the NVRAM error (if you are referring to the NVRAM error in the list of available Wifi networks). Fast charging works but only if you use proper cables. Original k3 note micro USB cable and adapter work just fine for me, 2 amps charging, you can measure the current with an app like Ampere, but an actual inline ampmeter is more precise of course. In either case charging works fast as well.
This ROM can glitch out sometimes, apps crash, but for the most part everything works OK. I thought I might go back to Lollipop ROMS, but then I tried this and I think I'll stick with it for a little while longer, see how it fares on the long run...
Click to expand...
Click to collapse
I already know that we have a virtual gyroscope, but the real problem is with magnetometer. It does not appear to work. NVRAM errors are mostly found in WIFI (We CAN FIX THEM BUT THIS MUST BE FROM DEVS SIDE ALSO). Last by fast charging i meant fast charging on software side which kills processes (like doze). because on stock the charging was a faster with same cable battery just before flashing the rom.
After a few days of additional use I think that there is a problem with the proximity sensor during calls. It's like the screen is blanked but still remains active. I keep pressing the screen during calls, activating "call on waiting", hanging up, or accessing menus, launching apps. There might be something in what @Anunay.j said that sensors are messed up. I'll try the new Vibe release for a few days, and see how it works...
livgrave said:
After a few days of additional use I think that there is a problem with the proximity sensor during calls. It's like the screen is blanked but still remains active. I keep pressing the screen during calls, activating "call on waiting", hanging up, or accessing menus, launching apps. There might be something in what @Anunay.j said that sensors are messed up. I'll try the new Vibe release for a few days, and see how it works...
Click to expand...
Click to collapse
try to turn off the dt2w. Problem might be there.
I'm having same issue. After ending call screen is a mess[emoji15]
Disclaimer: I am not responsible for anything bad that may occur with your device, but I will take all the credit you can give me if it works for you!
Finally, I would like to present first custom ROM for our device (Teclast T8)! It was ported by me from ASUS ZenPad 3S 10 Z500M and this firmware has lots of great features! It was tested for about a month before release, because I didn't want to share beta ROM with a lot of bugs/issues.
This version is only for flashing via TWRP! (it can be found here https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647)
Version Information
Status: stable (suits for everyday usage)
Created: 08.01.2019
Updated: 25.06.2020
Android version: kernel 3.18.35, android 7.0 Nougat
What's done/features
Added ROOT (Magisk)
No bugs with battery statistics (like it was on stock ROM)
Unique ASUS design and customization (icons, themes, etc)
New useful functions (split screen, quick launch apps on lockscreen, etc)
Advanced power/battery control tools
04.03.2020 - fixed issues with sound
25.06.2020 - fixed offline charge
Bugs
Double tap to awake function
Gestures on lockscreen
All other functions work great! (fingerprint, camera, etc)
Installation
Download firmware to internal storage
Reboot into TWRP
Do this wipes in Wipe section: system, cache, dalvik,data
Reboot recovery: go to reboot section -> choose Reboot recovery
Go to install section and choose .zip package
After installation completed just reboot device and enjoy
If you face error "failed to mount system" or something like this after installation completed - don't mind it and reboot
Screenshots
P.S After device is booted you can choose any language on system setup. I used MIUI icon pack here.
Download
The link is here - https://mega.nz/file/WxYTDSiI#tFXlrqjv3z9qgXI1aZoUM8NdTP99PvKI5eXJSmIeLEQ
If you would like to support further development - https://www.paypal.me/teclastT8development
Brilliant! Thank you Sword900 - GREAT JOB!
Thanks to the developer for this ROM and TWRP. It's a good device let down by lack of software support and removes all the Chinese native apps which I could not remove even with Titanium backup.
I was running TOS 2.0.1 but with a magisk patched boot image which I flashed a long time ago. This makes it simpler.
There are some issues with the TWRP but atleast I can update Magisk without having to patch the boot image and flash it every time.
The zip file in OP, the folder names have a comma after the number as pointed out earlier. Remove that before attempting any operations or you will face weird and wonderful behaviour.
Works like a charm !
I have problem with the sound. When i turn on the volume and play ssomething, i will hear annoying sound (ezzzzzz,,*%$)
zenacute said:
I have problem with the sound. When i turn on the volume and play ssomething, i will hear annoying sound (ezzzzzz,,*%$)
Click to expand...
Click to collapse
I too... any solutions?
zenacute said:
I have problem with the sound. When i turn on the volume and play ssomething, i will hear annoying sound (ezzzzzz,,*%$)
Click to expand...
Click to collapse
saddys said:
I too... any solutions?
Click to expand...
Click to collapse
Seems like I finally fixed it. You should install new version with all wipes listed, download link was updated. Let me know if you find any other issues.
How did you make this?
I'm trying to do the same with other Teclast tablets.(With P80X)
I would appreciate it if you could tell me.
(I used Google Translate)
few__ said:
How did you make this?
I'm trying to do the same with other Teclast tablets.(With P80X)
I would appreciate it if you could tell me.
(I used Google Translate)
Click to expand...
Click to collapse
I've just ported this ROM from another device with alike parameters (chipset, android os version, etc). There are lots of guides on the net which will help u. Another way is to find or make it manually kernel-source for your device, so u could compile firmwares on your own. But it requires appropriative knowledges in android development. Also u may take a closer look at GSI project as if your stock firmware is based on android 9.0.
How to install Android Q GSI on Mi5s PlusFor sure this rom is only for testing purposes, don't report stuff like lags in games, bad battery life etc
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
bugs:
Code:
- fingerprint
- night light
- button brightness
- adaptive brightness
- settings are crashing on gestures menu and ambient display
- volte
What is working then?
Code:
everything else should be fine, but if you find anything else broken report it there, i'll add it to bug list
Download links
https://mirrors.lolinet.com/firmware/gsi/
Q GSI ( A only ) - https://mirrors.lolinet.com/firmware/gsi/Generic-Aonly-Q-20190411-ErfanGSI.img.7z
Treble - https://www.androidfilehost.com/?fid=1395089523397919221
permissiver_v2.zip - https://androidfilehost.com/?fid=3700668719832241024
FIxZygote.zip - https://androidfilehost.com/?fid=1395089523397917059
Instructions how to flash
1) Full wipe
2) flash treble ( https://www.androidfilehost.com/?fid=1395089523397919221 )
3) wipe /data
4) install img of gsi into system partition
5) flash permissiver_v2.zip
6) flash FixZygote.zip
7) reboot
Credits
All credits for GSI goes for @erfanoabdi ( https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659 )
Credits for treble goes to this guys ( https://forum.xda-developers.com/mi-5/development/jdcteam-treble-support-project-t3761296 )
XDA:DevDB Information
[TREBLE/GSI] How to install Android Q GSi on Mi5sPlus, ROM for the Xiaomi Mi 5s Plus
Contributors
00day
Source Code: https://github.com/LineageOS/android_kernel_xiaomi_msm8996
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Version Information
Status: Alpha
Created 2019-04-14
Last Updated 2019-04-14
are bugs for android Q only or all roms?
should we use that rom for vendor partition or any cm 16 will work?
mehdi554 said:
are bugs for android Q only or all roms?
Click to expand...
Click to collapse
This is supposed to work only on Q GSI
mehdi554 said:
should we use that rom for vendor partition or any cm 16 will work?
Click to expand...
Click to collapse
Flashing los from this thread is required
it not the same los as you can find on luk thread, this one has treble support
for anyone else trying: I wanted to try OneUI , and it didn't boot.
@00day what happened to your screen? the left edge...
also could you please continue building LineageOS for this device with treble support?
Thanks a lot...
good
It works with the newly released Android 10 gsi rom (AOSP 10.0 v200.c) by phhusson (https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list).
What is working - call, sms (no notification), mtp, camera, wifi, mobile data
Rom is fast and smooth. No gapp yet so can't test further.
jngiag said:
It works with the newly released Android 10 gsi rom (AOSP 10.0 v200.c) by phhusson (https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list).
What is working - call, sms (no notification), mtp, camera, wifi, mobile data
Rom is fast and smooth. No gapp yet so can't test further.
Click to expand...
Click to collapse
Why there aren't gapps?
Lorenzopapi99 said:
Why there aren't gapps?
Click to expand...
Click to collapse
I don't know why. It is not available yet in opengapps.org. I guess more time is needed.
Is there any chance to see stable Android 10 treble? Any updates?
I managed to find the link for gapps.
https://sourceforge.net/projects/op...64-10.0-nano-20190920-UNOFFICIAL.zip/download
Working - google play service, call, sms (no notification sound), mtp, camera, wifi, mobile data, magisk, IR blaster, music & video (using VLC)
Not working - bluetooth, gps
There are 2 new releases of Android 10 in the Gsi list (PixelExperience 10.0 BETA & AospExtended v7.0 ALPHA). I find both sharing similar problems as AOSP 10.0 v200.c by phh. AospExtended seem to have lesser problem to me.
Working - google play service, call, sms, mtp, camera, wifi, mobile data, magisk (phh modified version only), IR blaster, music & video
Not working - bluetooth, gps
My installation goes like these:-
1) flash lineage-16.0-20190317-UNOFFICIAL-natrium.zip (from the treble link in the OP above)
2) flash img of gsi (aospExtended) into system partition -> reboot (will get a message "There's an internal problem with you device ..."
3) flash opengapp from the link earlier -> reboot -> will get a message "Device is not Play Protect certified"
4) flash ActiveKernel-natrium-06032019.zip (https://forum.xda-developers.com/mi-5s-plus/development/kernel-active-kernel-t3908210). This will update the kernel from 3.18.120 to 3.18.133 and get rid off the message "There's an internal problem with you device ..."
5) restore "data" backup from previous rom (Android 9/10 will work). This will get rid off the message "Device is not Play Protect certified".
6) flash magisk (phh modified version)
Have fun exploring!
jngiag said:
There are 2 new releases of Android 10 in the Gsi list (PixelExperience 10.0 BETA & AospExtended v7.0 ALPHA). I find both sharing similar problems as AOSP 10.0 v200.c by phh. AospExtended seem to have lesser problem to me.
Working - google play service, call, sms, mtp, camera, wifi, mobile data, magisk (phh modified version only), IR blaster, music & video
Not working - bluetooth, gps
My installation goes like these:-
1) flash lineage-16.0-20190317-UNOFFICIAL-natrium.zip (from the treble link in the OP above)
2) flash img of gsi (aospExtended) into system partition -> reboot (will get a message "There's an internal problem with you device ..."
3) flash opengapp from the link earlier -> reboot -> will get a message "Device is not Play Protect certified"
4) flash ActiveKernel-natrium-06032019.zip (https://forum.xda-developers.com/mi-5s-plus/development/kernel-active-kernel-t3908210). This will update the kernel from 3.18.120 to 3.18.133 and get rid off the message "There's an internal problem with you device ..."
5) restore "data" backup from previous rom (Android 9/10 will work). This will get rid off the message "Device is not Play Protect certified".
6) flash magisk (phh modified version)
Have fun exploring!
Click to expand...
Click to collapse
There's no phh magisk as far as I know, where did you get it?
pote2639 said:
There's no phh magisk as far as I know, where did you get it?
Click to expand...
Click to collapse
Go to "AOSP v10.0 v200" & click it. The "magisk-phh.zip" is there.
Here is another list of Android 10 gsi by developerluke .
I find Evolution-X_3.3 least problem – smooth installation & only bluetooth not working (connection ok but audio & media broken). Rom is smooth & fast. Thanks to the good works of the Developer!
Surprisingly, our phone is one of the best (with least problem) running Android 10 despite it is already ages-old.
Using Evolution-X_3.3 (2019-11-17) for 3 days, almost everything is working – call, sms, mtp, camera, wifi, mobile data, audio & video, youtube, gps, bluetooth call & media (some fixing needed), android auto. Volte & nfc are not availbale yet.
Rom is fast & smooth. Credit should go to the core “lineage-16.0-20190317-UNOFFICIAL-natrium.zip” apart from the developers of Android 10 gsi.
Hi, how is your battery life?
With EvolutionX 3.3 I have a huge battery drain, normally with Android 9 I can get 7h of SOT, with 10 GSI I'm happy if got 3h or 4h..
vigans said:
Hi, how is your battery life?
With EvolutionX 3.3 I have a huge battery drain, normally with Android 9 I can get 7h of SOT, with 10 GSI I'm happy if got 3h or 4h..
Click to expand...
Click to collapse
Before this, I was using Android 9 Havoc both rom & gsi and just a rough comparison (standby time overnight), EvolutionX 3.3 (with Pepsy kernel)
seem to have slightly a better battery life than both. SOT means leaving the screen on for all time? May be I can try on that.
Yes, screen on time on normal usage.. With web surfing, youtube, telegram/whatsapp, no games, my battery ends with only 4h of SOT.
Before, with all previous 9.0 roms (lineage,AospExtended, Syberia) , I got everyday 7h without problems..
Thank you
Battery usage of EvolutionX 3.3 for one day.
Battery from 100% -> 49%. Usage - a few short phone calls, 40 min of audio in phone speaker mode, 50 min of bluetooth audio.
Spepartely tested 11 min of games (Plants vs Zombies 2) consumes 3% of battery.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install twrp
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Links
[SM-T820]
5. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1D8lY5z9O3oafqiWlDLvtltFDQCEHnZbN/view?usp=sharing
4. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1enARwIN4oY_IrugrfncONxUGR-jbuY8s/view?usp=sharing
3. 20191224: latest sources, update kernel to 3.18.140: https://drive.google.com/file/d/1Hsl84EDxB_XQqgEPOIvyRjTdYUXuuWtR/view?usp=sharing
2. 20191013: https://drive.google.com/file/d/1z15hqXU-BL4H4MloSqukB2v1XqtUUlU2/view?usp=sharing
1. 20191010: https://drive.google.com/file/d/13gyKGE95kWFk2zbn0zW9GwiTHhyuPohr/view?usp=sharing
[SM-T825]
5. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1fe4Gdlyx4U27RPJVnidhoiO1pqTp0b7I/view?usp=sharing
4. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1duPl5zCv7D7xTvJjIAq6lrC7SfaWTl0c/view?usp=sharing
3. 20191224: latest sources, update kernel to 3.18.140: https://drive.google.com/file/d/1fvQMz0diPKFnzkVqMjLle74gFzn-6-Mq/view?usp=sharing
2. 20191013: https://drive.google.com/file/d/10CclbMYTINKww9dqZ_j6jKOqXcUX9s39/view?usp=sharing
1. 20191010: https://drive.google.com/file/d/1pW17U6PRt3Ptlm6WDCCbWG3HlanhaBx3/view?usp=sharing
Root
Install latest magisk (20.1+) from canary channel: https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
TWRP
Use twrp from https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
or my repack: https://drive.google.com/file/d/1KyX6xZ8WrcNyHo73-lHhU2dZjX0KFJc1/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM64
Android: 10.0
Sources
Sources: https://github.com/lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8996
Device: https://github.com/Valera1978/android_device_samsung_gts3llte and https://github.com/Valera1978/android_device_samsung_gts3lwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gts3llte and https://github.com/Valera1978/android_vendor_samsung_gts3lwifi
Thanks
Thanks to LineageOS team
Uh nice - thanks Valera! Any chance you can add your manifest? I would like to try building Android once myself.
Error flashed on screen on reboot
I am getting 'There's an internal problem with your device. Contact your manufacturer for detail.' error on every reboot. I've flashed the 'BL_T825XXU3CSH9_CL16530048_QB25611745_REV00_user_low_ship_MULTI_CERT.tar.md5' bootloader but still facing the issue.
See the screenshot for error message.
Camera is not working
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
Click to expand...
Click to collapse
Hi there,
do you have any intention to include palm rejection on Q?
It's the only missing feature on LOS...
Stogie87 said:
Hi there,
do you have any intention to include palm rejection on Q?
It's the only missing feature on LOS...
Click to expand...
Click to collapse
Do custom ROMs have to have palm rejection added? It's not normal feature?
This would be good to know as I got this device to use the pen!
I notice that screen is very hard to wake up. I have to play all buttons in random combination to be able to bring up lock screen. Once it get unlocked, everything works find.
I did once get system UI locked error. I have to push all buttons to force it reboot.
So I tested this rom on my T820 Wifi and in my opinion it works pretty stable, except of some issues I recognised:
- Saving pictures does not work. The pictures I get are scrambled.
- sd cards in ntfs format not working
- Palm rejection is not working
- ed xposed causes boot into download mode
- screen wakup is sometimes slow
- Viper4Android is not working
- Speaker only working on one site (right)
- it's not possible to rename SD Card or uninstall any system app like mail-app via root
- Netflix is not working
- Not possible to activate a custom notification sound
- Adaway only working with systemless host activated in magisk
- trying to use miracast causes a complete crash of system ui and makes a reboot necessary
- digital wellbeing randomly fc if settings menu is open
- sometimes hardware buttons stuck and i have to wait 5 sec until I can use them again
Thanks for your work!
*update: On second build same issues and camera just force close, now
did anyone figure out how to get the camera to work. It takes pictures but to view them they all look scribble.
does this rom work with the T825Y?
MR2_Wei said:
does this rom work with the T825Y?
Click to expand...
Click to collapse
Just try it. I think the specifications are the same like T825.
ghostman256 said:
did anyone figure out how to get the camera to work. It takes pictures but to view them they all look scribble.
Click to expand...
Click to collapse
Just use gcam it 'll work
alvinbw said:
Just use gcam it 'll work
Click to expand...
Click to collapse
Not working on second build for me
Now for the *REAL* question, does this ROM cause graphical glitches when you run a 3D load and heat the processor up to 100c?! That was my experience various unofficial LOS16/RR based Pie builds. I get temps in the worst case up to 97c under extreme load on the stock OneUI ROM, but normally it is way LOWER. Could someone (with the performance level in the power settings set to max) test games like https://play.google.com/store/apps/details?id=com.PnA.Offroad and some heavier ones for an extended period of time, and maybe some benchmarks (AnTuTu, 3DMark, etc...) while watching the CPU temp and General SoC temp with a temp guage overlay (like the one in the paid option on DevCheck).
Sent from my SM-G950U using Tapatalk
@Valera1978
Is there any chance, that you compile Havoc OS 3.0 for our Device?
Thanks in advance
I got it installed and booted but the rotate function isn't working, even when I open youtube and make it full screen it's doesn't rotate
MoSaMiChEs said:
I got it installed and booted but the rotate function isn't working, even when I open youtube and make it full screen it's doesn't rotate
Click to expand...
Click to collapse
Don't expect that anything on this rom will fixed soon.
Always the same with this dev. He releases a build with issues, then he ignores all issue reports and only releases sometimes a new build with security updates and nothing more. I wish a had wait a little bit and bought a tab s5e, because it seems to be the only new Samsung tab with fully working custom roms and palm rejection.
Better you use stock rom for tab s3.
w595shubham said:
I am getting 'There's an internal problem with your device. Contact your manufacturer for detail.' error on every reboot. I've flashed the 'BL_T825XXU3CSH9_CL16530048_QB25611745_REV00_user_low_ship_MULTI_CERT.tar.md5' bootloader but still facing the issue.
See the screenshot for error message.
Click to expand...
Click to collapse
same here
There is something that I cannot understand. The users say that there are problems with the ROM but OP says there aren't...
Quote:
Originally Posted by w595shubham
I am getting 'There's an internal problem with your device. Contact your manufacturer for detail.' error on every reboot. I've flashed the 'BL_T825XXU3CSH9_CL16530048_QB25611745_REV00_user_ low_ship_MULTI_CERT.tar.md5' bootloader but still facing the issue.
See the screenshot for error message.
Not sure if answered but I fixed this by:
Copying the complete line ro.vendor.build.fingerprint.................. from the /system/build.prop file.
Paste replacing the line ro.vendor.build.fingerprint.................. in the /vendor/build.prop file.
These files crosscheck each other looking for this line. The files must be from different builds.