Related
Hi
I have xperia neo v 11wxx
- performed unlock with test point (paid service) - all went ok
- flashed new soft with CWM - all went ok - flashed kernel in zip ICS_Spacious_Smooth_Light_ODEX_v2
After flashing phone stays at SE logo nothing happens
I Can't enter fastboot and flashboot mode
in fastboot the diode flashes blue for a sec and nothing happens
in flashboot (flashtool or companion or suse or manul) nothing happens
The phone is not detected properly (in flashtool i have to select my model manual) in companion it say "null"
In flashtool after manual selection it says that the phone flash is emty (no files in /system folders etc) no root ........
In s1tool after identify it gives some usb device error and missing file.
Iv also tried 3 diffrent computers (win8 - with driver signing off, 1x xp laptop , 1x win 7 laptop)
Tried diffrent drivers and diffrent cables
It look like kernel problem. Did you flash a kernel from zip package rom?
When you will want enter to fastboot mode turn off you device and put menu button and now connect phone to PC.
----------------------
Sorry for my bad English
tgrobi said:
It look like kernel problem. Did you flash a kernel from zip package rom?
When you will want enter to fastboot mode turn off you device and put menu button and now connect phone to PC.
----------------------
Sorry for my bad English
Click to expand...
Click to collapse
Yes iv flashed kernel from zip
I cannot enter fastboot (like i said blue led diode flashes and notthing happens)
The problem with fastboot started right after unlocking with testpoint.
Can you write what Rom you flashed?
tgrobi said:
Can you write what Rom you flashed?
Click to expand...
Click to collapse
ICS_Spacious_Smooth_Light_ODEX_v2
abaddon6661 said:
ICS_Spacious_Smooth_Light_ODEX_v2
Click to expand...
Click to collapse
It's good.
It seems like drivers problem.
But when you enter to fastboot mode the led blue flashes every time or fleshes on the moment and off.
If blue led off it's mean drivers problem for me.
I dont understand...if you cant enter fastboot mode,so you cant flash any kernel.My question,how you flash kernel from the zip actually?
flashes on the moment and off
iv tried many drivers nothing works
iv flashed zip in CWM
abaddon6661 said:
flashes on the moment and off
iv tried many drivers nothing works
Click to expand...
Click to collapse
Try to do hard reset. Remove the battery for 15 minutes.
Or try connect your phone to the mains without the battery for 15 minutes.
I see...actually you are not flash kernel,because kernel cant flashed through CWM.kernel ONLY can be flash through PC...
Sent from my MT11i using xda app-developers app
Your phone is not bricked. Had you unlocked your bootloader? New kernel can only be installed with unlocked bootloader in fastboot mode.
Open PC companion and select update phone, then remove battery, wait for 30 seconds, reinstall battery and connect phone to PC while pressing the back button, now follow instructions on PC. If this does not work you will need 'Sony_Ericsson_Update_Engine' which is no longer available on Sony website. If your bootloader is unlocked then you can install the stock kernel through fastboot mode and then flash stock ICS ROM through flashtool.
tgrobi said:
Try to do hard reset. Remove the battery for 15 minutes.
Or try connect your phone to the mains without the battery for 15 minutes.
Click to expand...
Click to collapse
Iv removed battery for 24h - no effect
Connecting without batter - no effect
mustang2011 said:
Your phone is not bricked. Had you unlocked your bootloader? New kernel can only be installed with unlocked bootloader in fastboot mode.
Open PC companion and select update phone, then remove battery, wait for 30 seconds, reinstall battery and connect phone to PC while pressing the back button, now follow instructions on PC. If this does not work you will need 'Sony_Ericsson_Update_Engine' which is no longer available on Sony website. If your bootloader is unlocked then you can install the stock kernel through fastboot mode and then flash stock ICS ROM through flashtool.
Click to expand...
Click to collapse
i have unlocked bootloader (test point - paid for this)
Pc companion detecting phone as "null"
Pressing back button - no effect. Phone not entering fastboot or flashmod mode
abaddon6661 said:
i have unlocked bootloader (test point - paid for this)
Pc companion detecting phone as "null"
Pressing back button - no effect. Phone not entering fastboot or flashmod mode
Click to expand...
Click to collapse
When you connect phone to mains does battery is charging?
Maybe microUSB port is damaged.
abaddon6661 has right, your phone isn't bricked.
----------------------------------
Sorry for my bad english
tgrobi said:
When you connect phone to mains does battery is charging?
Maybe microUSB port is damaged.
abaddon6661 has right, your phone isn't bricked.
----------------------------------
Sorry for my bad english
Click to expand...
Click to collapse
Battery is charging.
The problem is that i cannot reflash or enter fastboot.........
abaddon6661 said:
Battery is charging.
The problem is that i cannot reflash or enter fastboot.........
Click to expand...
Click to collapse
Can you enter CWM?
no
abaddon6661 said:
no
Click to expand...
Click to collapse
SUS (not SUSE) not detect phone too? In SUS is repair options.Your phone isn't brick SUS should repair it.
I spoke with a guy who had a similar problem. PC not detect phone and hi can't enter to fastboot mode. His phone has problem to battery. System kept that battery is low (0%). Exchange battery helped.
--------------------------------
Sorry for my bad english
Hi, i'm from Indonesia.
i have hard bricked my Z ultra.
the root of my Zul bricked when i want to flash deodexed.
before i flash the zip , i wipe cache and instal it
after reboot my phone have boot loop , and i use Hard reset.
now my phone cant go to fashboot mode and flashtool
can't detect ADB.
so i can't fix this phone. I charging to wall charge 10+ hours, now i got LED RED not blinking.
i try to connect to PC but still can't flash the tft.
Please Help me if somebody know to Fix, help me guys.
Regards,
Kevin
kevin Hansjaya said:
Hi, i'm from Indonesia.
i have hard bricked my Z ultra.
the root of my Zul bricked when i want to flash deodexed.
before i flash the zip , i wipe cache and instal it
after reboot my phone have boot loop , and i use Hard reset.
now my phone cant go to fashboot mode and flashtool
can't detect ADB.
so i can't fix this phone. I charging to wall charge 10+ hours, now i got LED RED not blinking.
i try to connect to PC but still can't flash the tft.
Please Help me if somebody know to Fix, help me guys.
Regards,
Kevin
Click to expand...
Click to collapse
How have you tried to enter flashmode and fastboot?
blueether said:
How have you tried to enter flashmode and fastboot?
Click to expand...
Click to collapse
I cant enter flashbmode and fastboot right now, i'm tried several times it wont connect, always said usb debuging OFF.
kevin Hansjaya said:
I cant enter flashbmode and fastboot right now, i'm tried several times it wont connect, always said usb debuging OFF.
Click to expand...
Click to collapse
I think he's asking you what steps you took to enter flashmode and fastboot.
kevin Hansjaya said:
I cant enter flashbmode and fastboot right now, i'm tried several times it wont connect, always said usb debuging OFF.
Click to expand...
Click to collapse
what i do is open the flashtool and use old rom , after flashtool ready i try connect my phone to PC , i hold volume up but always says usb debuging OFF.
Can you help me?
try to boot up the phone and hold volume up at the same time with usb plugged in, hopefully a blue led shows.
Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do :crying:
BTW my battery was 25%
Bump
Help
Sal7_one said:
Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do :crying:
Click to expand...
Click to collapse
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
ptmaniac said:
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
Click to expand...
Click to collapse
Thank you si much for replaying I will send it I'm an idiot for not seeing unlocked bootloader
I will fix USB and again thanks bro
ptmaniac said:
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
Click to expand...
Click to collapse
Bro I fixed the usb please it's flashing red what do I do
Sal7_one said:
Bro I fixed the usb please it's flashing red what do I do
Click to expand...
Click to collapse
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
ptmaniac said:
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
Click to expand...
Click to collapse
You're really awesome iknow how to use flash tool but it's says drivers are not installed and they are and what should I choice from the wipe menu
I solved the problem with the drivers when I try to flash ftf it's says preparing then it's says device disconnected should I put it on fastbot or flash mod
ptmaniac said:
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
Click to expand...
Click to collapse
I don't know why but my only problem is the device automatically disconnectes from flash tool after a minute I can't flash !!!! Please help
I downloaded sony companinton and update the phone and now the phone turn on and charge only it dosent work
Sal7_one said:
I downloaded sony companinton and update the phone and now the phone turn on and charge only it dosent work
Click to expand...
Click to collapse
Humm weird, try flashtool once again, maybe with another .ftf or another pc, select all wipes, choose flashmode, make sure your phone is completely powered-off, when flashtool asks to connect just keep pressing volume down and plug the usb cable. flashing should start fine now.
ptmaniac said:
Humm weird, try flashtool once again, maybe with another .ftf or another pc, select all wipes, choose flashmode, make sure your phone is completely powered-off, when flashtool asks to connect just keep pressing volume down and plug the usb cable. flashing should start fine now.
Click to expand...
Click to collapse
Nope after 1 minute flash mode turns off automatically soo now here is what I did
Step 1 downloaded sony c s
Step 2 installed supprot
Step3 press update device without contcing to pc
Step 4 chose repair
Step 5 go with it and put it in flash mode
Step 6 before it finishs it will take a long time
Then it will only charge you can't press the power button for some reason
Step 7 go to flash tool start flash mode and it will reboot automatically
Step8 you will be in safe mode go to settings and format the phone
Step 9 it will reboot and into normal mode
Step 10 root through king root and termanil to make it a real root not temporarliy
Step 11 enable usb debugging and install recovery
Step 12 copy the rom from pc to recovery
Step 13 installed the rom everything is amazing except for one problem
I still can't press the power button I don't think it's hardware help me
That's it thanks for everything tell me if you know anything about the power button
@Sal7_one Wow that was way more complicated than it should but i'm glad your phone is working again :good:
Did you open your phone to fix the usb port? or did you send it somewhere? unfortunately the power button situation does seem like hardware problem...
ptmaniac said:
@Sal7_one Wow that was way more complicated than it should but i'm glad your phone is working again :good:
Did you open your phone to fix the usb port? or did you send it somewhere? unfortunately the power button situation does seem like hardware problem...
Click to expand...
Click to collapse
Wtffffffff it's working again. I don't know how bro !!!! I just tested and it's start working again.
But one more problem sim card does not work yes I went to repir it thanks
@Sal7_one humm pwr button working when it wants and sim card problems... that sounds like a bad repair job they probably left a cable / connector loose inside your phone :| i would take it to the same place and make them check / repair the phone again
Hello guys, i have another problem with my M4. After i flashed Xposed (but no wipe cache) my phone does not work perfectly (errors with some application in sd card) and i decided to restore it to stock firmware. The firmware i am trying to use was already flashed other time and it work fine. But now, when i try to get into flashmode the green led light up for 1 second, then light off and another time light up but not stuck into flashmode. I have all drivers on my pc and it recognize the phone as SOMC flash device, but the green led is down and Flashtool not start flashing.... What can I do? Fastboot and recovery mode works fine.
alby_var said:
Hello guys, i have another problem with my M4. After i flashed Xposed (but no wipe cache) my phone does not work perfectly (errors with some application in sd card) and i decided to restore it to stock firmware. The firmware i am trying to use was already flashed other time and it work fine. But now, when i try to get into flashmode the green led light up for 1 second, then light off and another time light up but not stuck into flashmode. I have all drivers on my pc and it recognize the phone as SOMC flash device, but the green led is down and Flashtool not start flashing.... What can I do? Fastboot and recovery mode works fine.
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/m4-aqua/general/tut-blu-twrp-root-xperia-m4-aqua-t3238962
Thank you, but still no flashmode. When I try to charge (from power off device) the green light do the same thing of when I connect phone in flashmode to pc... Now its charging in fastboot mode
Make sure, use usb 2.0, not usb 3.0?
Yes, usb 2.0 , and original cable...
Update: if i connect to pc i see SOMC FLASH DEVICE into device manager. But flashtool not start flashing....
Ok guys, I am able to boot in recovery, can please someone give me a backup of system and boot? I will infinite thanks...
alby_var said:
Ok guys, I am able to boot in recovery, can please someone give me a backup of system and boot? I will infinite thanks...
Click to expand...
Click to collapse
This is my Boot-backup. I haven't space for system-backup.
https://app.box.com/s/6okdn3wafe6mh3y4yhfe451nm0hwasah
Really Thank you! Without boot and system i can't use the phone and i need it. Again, Infinite thanks...
alby_var said:
Really Thank you! Without boot and system i can't use the phone and i need it. Again, Infinite thanks...
Click to expand...
Click to collapse
Check your P-M box...
Anyone have a backup of system that please can send to me?
@alby_var
Did you try twrp sideload adb push ?
yes, i tried adb sideload but say a thing like: protocol fault (no status)
Here is some thing that worked for me, even i could not get into Flash Mode.
turn off your phone
run flash tool, select the firmware you want to flash and click flash, wait for the tool ask you to connect the phone.
Now connect the USB cable to the phone with the Volume down pressed and do not let go of the volume down button until the flash process is done.
if the phone is still not detected, do the same but change the USB port.
it happens to me that if i let go of the Volume down button, the phone disconnect from flash mode.
if you are able to boot to home screen then it best to boot to fastboot using the option in Flash tool and then disconnect the USB cable, and then start the Flash process
Good Evening/Hello/Hi,
Even, I have the same a problem with my Sony Xperia M Dual(C2004). After i flashed my phone does not work perfectly (errors with some application in sd card) and i decided to restore it to stock firmware. The firmware i am trying to use was already flashed other time and it work fine. But now, when i try to get into flashmode the green led light up for 1 second, then light off and stuck into flashmode. I have all drivers on my pc and it recognize the phone as SOMC flash device, but the green led is down and Flashtool not start flashing.... What can I do? Fastboot and recovery mode works fine.
hello u all
while making a reparing of the software of a Sony Xperia zx1 G8341 with the Sony Xepria Companion my internet connection falls down. actually my phone dont work, or any bottom and i cannont reboot the system by any way. i tried to intall minimal adb and Sony Emma Flashtool to reboot the system to fabricant settings with my PC (windows 10) but the phone is totally dead. the port usb read a connection but it makes errors in every read. i dont care about the information, i just want ty to recovery the device. thaks u all for reading and any help possible
bhaco said:
hello u all
while making a reparing of the software of a Sony Xperia zx1 G8341 with the Sony Xepria Companion my internet connection falls down. actually my phone dont work, or any bottom and i cannont reboot the system by any way. i tried to intall minimal adb and Sony Emma Flashtool to reboot the system to fabricant settings with my PC (windows 10) but the phone is totally dead. the port usb read a connection but it makes errors in every read. i dont care about the information, i just want ty to recovery the device. thaks u all for reading and any help possible
Click to expand...
Click to collapse
Are you able to enter the flash mode ?
Sent from my G8342 using Tapatalk
bhaco said:
hello u all
while making a reparing of the software of a Sony Xperia zx1 G8341 with the Sony Xepria Companion my internet connection falls down. actually my phone dont work, or any bottom and i cannont reboot the system by any way. i tried to intall minimal adb and Sony Emma Flashtool to reboot the system to fabricant settings with my PC (windows 10) but the phone is totally dead. the port usb read a connection but it makes errors in every read. i dont care about the information, i just want ty to recovery the device. thaks u all for reading and any help possible
Click to expand...
Click to collapse
emm....
try rebooting by pressing volume Up and power together until the phone vibrates.plug the smartphone into a USB connected PC and press the volume up if the LED lights blue try entering the "fastboot devices" command if it is detected unplug and connect again while press the volume down if the LED lights green do flashing
I pray that your device can be used again
hany ahmed79 said:
Are you able to enter the flash mode ?
Sent from my G8342 using Tapatalk
Click to expand...
Click to collapse
no i can't, i think the bottoms are dead for some reason because I try to enter the flashmood and it don't work at all. after some days i connected the phone to a electric charger and the screems shows the Sony logo and the status of battery but i can't turn on the phone o acces the flsh mode to reboot the system. it's any chance that the bottoms don't work for a software problem?? or it s easy to repair the bottoms ? thaks u all for you answers
Can you do a screen of device manager in W10? I want to know if there is any device with strange name. Do you have a unlocked BL or it is still locked?
hany ahmed79 said:
Are you able to enter the flash mode ?
Sent from my G8342 using Tapatalk
Click to expand...
Click to collapse
I've also the same problem on my xperia xz1. I accidentally disabled Develover mode and soon my phone become dead. No response while i press power button or any other key combination (also can't enter fastboot/ flash mode). But while I connect to PC with xperia flashtool, the Xperia Logo appear and then a repair sign and then show charging battery. Flashtool show phone is connected with USB debugging disabled.
Please answer me if my phone is recoverable or not and what should i do.
Thanks
Winux_Aung said:
I've also the same problem on my xperia xz1. I accidentally disabled Develover mode and soon my phone become dead. No response while i press power button or any other key combination (also can't enter fastboot/ flash mode). But while I connect to PC with xperia flashtool, the Xperia Logo appear and then a repair sign and then show charging battery. Flashtool show phone is connected with USB debugging disabled.
Please answer me if my phone is recoverable or not and what should i do.
Thanks
Click to expand...
Click to collapse
Do you have unlocked BL? Have you tried to fix it using pc companion or not?
EDIT There is something called Newflasher. I have used it few times but I don't know if it works with locked bootloader and disabled developer mode because I have a TA backup and unlocked BL. You have to ask on this thread https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 and try to do it by yourself. It may get work.
dawidcx3 said:
Do you have unlocked BL? Have you tried to fix it using pc companion or not?
EDIT There is something called Newflasher. I have used it few times but I don't know if it works with locked bootloader and disabled developer mode because I have a TA backup and unlocked BL. You have to ask on this thread https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 and try to do it by yourself. It may get work.
Click to expand...
Click to collapse
Appreciate your suggestion. I tried PC companion but it can't detect my phone. I've never tried to unlocked BL.
I'll tried with Newflasher as you said.
EDIT: The newflasher can't help. I think the main problem for my phone is that all buttons are not functioning. May be I accidentally did something in developer mode of my phone before it got crashed. (when i connect to charger, screen shows Xperia logo , then a triangular repair sign and finally a green charging battery).
Winux_Aung said:
Appreciate your suggestion. I tried PC companion but it can't detect my phone. I've never tried to unlocked BL.
I'll tried with Newflasher as you said.
EDIT: The newflasher can't help. I think the main problem for my phone is that all buttons are not functioning. May be I accidentally did something in developer mode of my phone before it got crashed. (when i connect to charger, screen shows Xperia logo , then a triangular repair sign and finally a green charging battery).
Click to expand...
Click to collapse
It is hard to diagnose through the internet but we can try to eliminate next causes. So, you can't flash due to turned off USB Debugging or because you cannot enter flash mode? It is important because if you have hardware issue with buttons fixing it may be a solution. I have disassembled my XZ1 and I know that buttons replacement is quite easy for people with some experience and they cost about 5-10$ or 4.5-9.5 euro depending on region. Have you tried safe mode? The most important is that your phone is not dead at all, so there still is a hope.