Glad to be a member of XDA-dev!
Hi guys, I am not sure if I am following the rule of the furom but I dont know what to post for the 10 post rule since " I AM REALLY A NOOB!"
I am new to the android and rooting world. I hope that the Admin and the Mods will be able to understand this post as to what I am getting through right now.
I have a problem with my Acer Liquid Mini E310. I hope that someone will be able to help me here! ( I am sure that someone should have the answer to this)
When a friend of mine introduced rooting to me, I was amaze on what it can change and what it can do to your android phone. I've read xda forum post on how I can root my Acer Liquid Mini E310 and I have also read about the danger it could cause to your device (brick). I did not really put in mind that I will be causing my phone to be bricked since I am sincerely and precisely following all the instructions in everypost that I have gone through. I have rooted my phone in a good way and it worked for 2 months of use, rooted.
There was a time that I've read about font changer on what it could do to customized your phone fonts. I did tried downloading GO Laucher and one of its feature is changing the fonts on the GO Launcher settings page. I was amaze by it and I got the idea of getting my rooted Acer Liquid Mini E310 to change its system fonts. I went to market and downloaded "FONT CHANGER by MARTIN". I applied the settings and the app requested for my phone to be rebooted.
When the phone went to boot up it stuck to the Acer logo with the 3 android icons on the screen. I tried hard resetting it by holding Power, Volume down and Camera button and let it vibrate 3 times. It did reset /data and /cache then reboot but when it boot up it will stay on the same screen with the Acer logo with the 3 androids icon.
I did tried to read some posts here and I got this post about Odin 3. This software needs a .PIT and another file that is needed to be input so that it will be able to download and fix the problem. I dont know which and where I can download those files.
I REALLY NEED YOUR HELP! I know that its a big mistake for me since I didnt really studied rooting before proceeding on rooting my phone but I hope you can help me out on this. I really dont have the financial capability to get a new phone right now. Please guys.
Any suggestions would do. Thanks in advance.
- judajammers
If you have still problem with your device than go to acer site and download gingerbread 2.3.5 version and try to install on your device but before you install on your device you have to swtich your phone to download mode ( Voluem down + Power on key) before do this thing you have to shutdown your phone.
Chiragsilver said:
If you have still problem with your device than go to acer site and download gingerbread 2.3.5 version and try to install on your device but before you install on your device you have to swtich your phone to download mode ( Voluem down + Power on key) before do this thing you have to shutdown your phone.
Click to expand...
Click to collapse
Thanks for the post sir. Is there any further steps that I need to do?
hi my nexus 5 is stuck in bootloop ( turning on and off by itself and can't get past the google icon) and i can't access the bootloader for a reset. can anyone help me please?
pretty much all system reset/ factory image guides require me to access the bootloader but the problem is that the phone won't stay in the bootloader because of the bootloop, it turns off as soon as i get into the bootloader.
HELP PLEASE???
nxus5user said:
hi my nexus 5 is stuck in bootloop ( turning on and off by itself and can't get past the google icon) and i can't access the bootloader for a reset. can anyone help me please?
pretty much all system reset/ factory image guides require me to access the bootloader but the problem is that the phone won't stay in the bootloader because of the bootloop, it turns off as soon as i get into the bootloader.
HELP PLEASE???
Click to expand...
Click to collapse
Hi, have you found a solution?
I have here the same problem
Thanks
hi guys, ive soft rooted my galaxy ace 4, I thn downloaded rom toolbox lite then found a cool button that said pixel density then I put tht up to max thinking it would be a good idea but now I cant get into my phone and would like to either factory reset or just change that setting back somehow, I'm a somewhat noob with basic root and device knowledge so please excuse me if I do not comprehend, my device powers on fine and everthing its when it fully on that I get a notification saying, "unfortunately com.android.systemui has stopped, and my resolution is way too big, is there an easy way to factory reset even though I cant get into the phone to change setting, it connects to my pc but adb says the device is unauthorized see dialog box, so I'm out of ideas, if someone can help before 11th august (I'm going on holiday) then that would be amazing!
thanks everyone!
btw I don't have twrp or cwm cuz I didn't install them I'm dumb ik,
also if there is a way to factory reset easily from pc or anything, like if I hold the power and volume it should put me in bootloader but it says warning installing a custom rom could be dangerous don't remove target.
please help
thank you
You can install twrp or cwm with odin and from there do a Factory Reset. I don't have the files. But you can search them.
Sorry if i didn't help.
Sent from my SM-G313HZ using XDA-Developers mobile app
Hello guys i really need your help about this one..
So i have Verizon S4 OC1 bootloader and i am running stang5litre Ultra Note5
Recently while i was playing resolution changer and i changed my Resolution and dpi too low and now i can't do anything on my phone as its displaying unfortunately system ui has stopped ,unfortunately touchwiz home has stopped even after restart
I tried Safe mode i tried connecting to ADB but i can't enable usb debugging so i am stuck with Stock recovery and download mode
I still haven't tried to factory reset through stock recovery becouse i am not sure what will happen
I guess i need to replace build.prop somehow or to install third party launcher but i don't know how.Any help will be greatly appriciated sorry if i am breaking rules or anything ,and sorry for my english
Thanks in advice
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Renojjv said:
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Click to expand...
Click to collapse
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Renojjv said:
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Click to expand...
Click to collapse
I had the same problem , and I fixed it.
When you install the TWRP for some reason the data partition get corrupted to resolve this you need to do the following :
---- before you do any thing capture the following information and keep it ----
IMEI , Barcode, Modem Version, Bluetooth MAC , WIFI MAC address
IMEI, barcode and Modem Version details can be found in the factory mode:
- switch your phone off
- Press power button and volume down -- you will boot into factory mode
- from the menu select version ( scroll using volume down button ) click power button
you should see BB chip details, MS Board, etc
note down the following into a paper or to your computer and keep it ( in my case it was useful when I changed the rom)
1- IMEI numbers
2- Modem Version ( Baseband version)
3- barcode number ( I found this info only in this menu)
for the (Bluetooth and WIFI) MAC address you need to boot into your phone and go to settings , scroll down to About phone ( in my case I need to click to More) , then click on Status
you will found ( also you can found the IMEI information it should match what you capture above)
1- Bluetooth MAC address
2- WIFI MAC address
now you have everything you need to format your mobile in case that was needed.
---- Note the following steps will wipe your contacts and reset the phone settings, data on your SD card should not be effected -------------
To root your mobile do the following:
1- install TWRP using SP_Flash
2- copy SuperSU to your SD card
3- reboot to recovery (into TWRP)
if you install SuperSU, now you should notice that it didn't complete and there are some errors for that you need to fix the data partition before install SuperSU
4- click wipe, click Advanced Wipe
5 - select Data and Click on "Repair or Change File System"
if its corrupted the size should be 0 to fix it continue step 6
6- Click change File system and change it to EXT4
7- Wipe to Change it should format the partition for you
when complete check the size of the partition is not 0
if its still 0 " Click Repair File System" in menu of step 5
now you are ready to install SuperSU
Lava iris r1s
I like to install leneage or unicorn os on lava iris r 1s. Can anybody help me ... I cant find any files for rooting and installing twrp.. please help
Rooting or TWRP for LAVA R1s
Please help me to root Lava R1s model .. tried with kingoroot and other once click root apps all failed .. kindly give working link for TWRP recovery for LAVA R1s , not able to find in the internet.
Lava r1 s, add stock rom
Hi bro I also have lava r1 s without camera,
I want to reinstall stock rom as I am tried of add on this phone,
Can you plz provide a link for stock rom and resolution to these adds
Vijay
Renojjv said:
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Click to expand...
Click to collapse
Custom rom required for lava r1s non camera
vsingh1611 said:
Hi bro I also have lava r1 s without camera,
I want to reinstall stock rom as I am tried of add on this phone,
Can you plz provide a link for stock rom and resolution to these adds
Vijay
Click to expand...
Click to collapse
HELLO TEAM,
PLEASE SEND ME THE CUSTOM ROM FOR LAVA R1s+ NON CAMERA ANDROID PHONE. AND ALSO PLEASE TELL ME THE STEPS HOW TO FLASH THE CUSTOM ROM. FROM THE ABOVE I JUST SEE THE STEPS TO INSTALL THE ROM,BUT NO ONE HAS SEND THE PROPER CUSTOM ROM LINK FOR LAVA R1s NON CAMERA PHONE. KINDLY REPLY FOR THE SAME.
software update error lava r1s
Renojjv said:
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Click to expand...
Click to collapse
Please tell me how to troubleshoot my software update error in my LAVA R1s non camera Android phone. The software update notification keeps on popping up. And when I click on the notification update then I get the following error saying " Not enough memory. Update needs atleast (109.82mb)". I even have hard resetted the phone but I still get the same update error later on once it gets completely resetted. As soon as it gets connected to internet data connectivity I get the pop ups for software update. How do I get rid of the same.
root lava r1
Hello...
U can try magisk manager method.
It is worked in my lava r1 2gb ram device.
Take patched boot file from magisk manager and flash it via sp flash tool.
coolmanrakesh said:
I like to install leneage or unicorn os on lava iris r 1s. Can anybody help me ... I cant find any files for rooting and installing twrp.. please help
Click to expand...
Click to collapse
I have build ressurection remix nougat. You can try it.
https://forum.xda-developers.com/android/development/lava-r1s-camera-gps-ressurection-remix-t4145507