Welcome everyone!This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!
Regards,
PoseidonKing
COMMON NOOB QUESTIONS
1. How to unlock the bootloader of my Redmi Note 3? <<Click Here>>
2. How do I root my Redmi Note 3 after I have unlocked it? <<Click Here>>
3. How do I install a custom recovery like TWRP? <<Click Here>>
4. How to flash custom ROMs or Developer editions of MiUi? <<Click Here>>
5. Which ROM is the best for Redmi Note 3? <<Click Here>>
Hit Thanks if I Helped You!
Regards,
PoseidonKing
Reserved
After flashing the latest MIUI8 6.11.3 global developer ROM my GPS is not active always. I found it while using Endomondo running & walking apps it is working good on global stable.
any help must be appreciated .
Triggered from my Nexus 10
amitroutray said:
After flashing the latest MIUI8 6.11.3 global developer ROM my GPS is not active always. I found it while using Endomondo running & walking apps it is working good on global stable.
any help must be appreciated .
Triggered from my Nexus 10
Click to expand...
Click to collapse
Mine is working fine..check if it's running on high accuracy mode or not under Settings-additional settings-privacy-location..
yes it is on high accuracy only but do not know why it is not working properly. and thanks for your concern.
Triggered from my Nexus 10
amitroutray said:
yes it is on high accuracy only but do not know why it is not working properly. and thanks for your concern.
Triggered from my Nexus 10
Click to expand...
Click to collapse
This maybe stupid..but did you check if those apps have location permission on?..is Google maps working?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes it has. One thing I observed today while useing Endomondo it is working perfectly but when screen is off the GPS is not working and it remain idle. Once screen is on everything working perfectly.
I have also enabled Never sleep inside Lock Screen & Password.
Triggered from rn3
amitroutray said:
Yes it has. One thing I observed today while useing Endomondo it is working perfectly but when screen is off the GPS is not working and it remain idle. Once screen is on everything working perfectly.
I have also enabled Never sleep inside Lock Screen & Password.
Triggered from rn3
Click to expand...
Click to collapse
Have you updated your phone to 6.11.24?.try that..And try locking the app in the multitasking menu by swiping it down.
But the official one is 6.11.3 and I am waiting for the OTA.
Edit: Now OTA is showing 172 mb. Thanks
Triggered from rn3
amitroutray said:
But the official one is 6.11.3 and I am waiting for the OTA.
Edit: Now OTA is showing 172 mb. Thanks
Triggered from rn3
Click to expand...
Click to collapse
Try going to app battery saver in security app
reddevils4017 said:
Try going to app battery saver in security app
Click to expand...
Click to collapse
Are you referring to this one??
Triggered from rn3
Is there any way to know beforehand which fingerprint scanner your device will have? I'm interested in running Cyanogenmod only which officially supports the FPC1020 one, but not the Goodix.
Maybe international vs chinese version?
This really makes or breaks my decision so any knowledge would be greatly appreciated. Don't feel like gambling and I don't wanna return it to china or let it collect dust in a drawer.
Otherwise this seems like a great device.
Thanks in advance!
amitroutray said:
Are you referring to this one??
Triggered from rn3
Click to expand...
Click to collapse
This one
schallwert said:
Is there any way to know beforehand which fingerprint scanner your device will have? I'm interested in running Cyanogenmod only which officially supports the FPC1020 one, but not the Goodix.
Maybe international vs chinese version?
This really makes or breaks my decision so any knowledge would be greatly appreciated. Don't feel like gambling and I don't wanna return it to china or let it collect dust in a drawer.
Otherwise this seems like a great device.
Thanks in advance!
Click to expand...
Click to collapse
Check out this thread
http://forum.xda-developers.com/redmi-note-3/help/fp-sensor-fpc-goodix-t3459250
Hi i want the instrictions to:
1:>Unlock the bootloader (unofficially)
2:>which twrp{i want a twrp that can support miui beta rom and cm and rr roms and if not then i want a recovery just or cm and rr roms}
3:>which miui to use for unlocking bootloader
4:>how to root
5:>stable + volte supported latest android 7 rom.
Please help me
Thanks in advance.
Njaiker said:
This one
Click to expand...
Click to collapse
My Battery saver is off.
Triggered from rn3
---------- Post added at 11:07 AM ---------- Previous post was at 10:58 AM ----------
Njaiker said:
Have you updated your phone to 6.11.24?.try that..And try locking the app in the multitasking menu by swiping it down.
Click to expand...
Click to collapse
Updated to latest build now. How to locking the app in the multitasking menu..??
Another thing I have the ZCX recovery with Support MIUI-OTA option enabled. But can't flash the incremental updates first time. I have to download the whole update every time
Triggered from rn3
amitroutray said:
My Battery saver is off.
Triggered from rn3
---------- Post added at 11:07 AM ---------- Previous post was at 10:58 AM ----------
Updated to latest build now. How to locking the app in the multitasking menu..??
Another thing I have the ZCX recovery with Support MIUI-OTA option enabled. But can't flash the incremental updates first time. I have to download the whole update every time
Triggered from rn3
Click to expand...
Click to collapse
You can lock an app by sliding it down in the multitasking menu and tapping the lock button.(screenshot attached)
I cannot tell you much about ZCX as I am still trying to unlock my phone and I am stuck with "couldn't verify device : current account is different from the account info on the device" . Still you can check out this thread it has an FAQ section in the OP try those steps.
http://forum.xda-developers.com/redmi-note-3/how-to/zcx-twrp-install-twrp-flash-supersu-t3462448
Njaiker said:
You can lock an app by sliding it down in the multitasking menu and tapping the lock button.(screenshot attached)
I cannot tell you much about ZCX as I am still trying to unlock my phone and I am stuck with "couldn't verify device : current account is different from the account info on the device" . Still you can check out this thread it has an FAQ section in the OP try those steps.
http://forum.xda-developers.com/redmi-note-3/how-to/zcx-twrp-install-twrp-flash-supersu-t3462448
Click to expand...
Click to collapse
Thanks for the reply
I am having the same issue. My unlocking is also stuck at 50%. One guy said just apply again with a different mail ID. After I received uthorization I am able to unlock it.
Triggered from rn3
amitroutray said:
Thanks for the reply
I am having the same issue. My unlocking is also stuck at 50%. One guy said just apply again with a different mail ID. After I received uthorization I am able to unlock it.
Triggered from rn3
Click to expand...
Click to collapse
thank you , I will surely try this.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUI.us Is Proud To Present
MIUI v4 2.5.25 For Nexus One
Installation Instructions:
Click to expand...
Click to collapse
Place ROM zip file in your SD card
Boot into recovery
Create a backup
Factory reset device
Install zip from SD card
Reboot and enjoy!
Click to expand...
Click to collapse
Not Working:
Click to expand...
Click to collapse
???????????
Click to expand...
Click to collapse
Downloads:
Click to expand...
Click to collapse
2.5.11 - download | MD5 - d8629db72ffa339ecc7b30325af6491f
If you repartitioned your device you will want to download 2.5.25.-blackrose
2.5.25-blackrose - download
Previous Builds
Click to expand...
Click to collapse
Changelogs:
Click to expand...
Click to collapse
ROM Changelog:
Click to expand...
Click to collapse
Native USB support now including USB tethering.
Now based on Android 4.0.4 - 4/6/2012
MIUI Changelog
Click to expand...
Click to collapse
PLEASE DO NOT MIRROR OR LINK TO THE DOWNLOADS WITHOUT PERMISSION
May I see some screenshots?
Great! The day after I take the plunge with black rose!
Sent from my Nexus One using XDA App
Is App2Ext or something like this included?
crush41 said:
Is App2Ext or something like this included?
Click to expand...
Click to collapse
Not at the moment. But I'll add that to the request list.
Downloading, testing with Blackrose and original partition
update: just realized that I don't know whether barcode scanner works or not? Need this as all my Gmail accounts has 2-step authentication on
Do we need to flash this: hboot_220-16-200.nb0 ? As in that partition sizes?
Androidity3000 said:
Do we need to flash this: hboot_220-16-200.nb0 ? As in that partition sizes?
Click to expand...
Click to collapse
No, OP says no Blackrose or repartitioning needed!
woozyking said:
No, OP says no Blackrose or repartitioning needed!
Click to expand...
Click to collapse
Sorry, my bad. I for some reason skipped reading the word "not" in the OP lol. I will try this ROM out now and give a full review in just a bit.
EDIT: Seem to have problems. Zip is not signed correctly and after I install I just get to the MIUI boot logo and it gets stuck there. I tried to download it again / wipe / reflash and still no luck... Will continue trying. Anyone get this to work yet?
Androidity3000 said:
Sorry, my bad. I for some reason skipped reading the word "not" in the OP lol. I will try this ROM out now and give a full review in just a bit.
EDIT: Seem to have problems. Zip is not signed correctly and after I install I just get to the MIUI boot logo and it gets stuck there. I tried to download it again / wipe / reflash and still no luck... Will continue trying. Anyone get this to work yet?
Click to expand...
Click to collapse
It could be Blackrose, get stock hboot and give it another shot? I haven't started trying this yet, since I need to use my phone to be stable these days, I flashed it back to GB.
woozyking said:
It could be Blackrose, get stock hboot and give it another shot? I haven't started trying this yet, since I need to use my phone to be stable these days, I flashed it back to GB.
Click to expand...
Click to collapse
Just a heads up, this has been my daily runner for 4 days now. Well MIUI ICS that is. I started working on this when 2.1.20 was available for the Nexus S and 2.2.3 seems to be the most stable yet.
I have no problem using this on a day to day basis.
woozyking said:
Downloading, testing with Blackrose and original partition
update: just realized that I don't know whether barcode scanner works or not? Need this as all my Gmail accounts has 2-step authentication on
Click to expand...
Click to collapse
hey mate, is trackball wake function work?
Thanks
New Mirror http://up.4share.vn/f/3f0d0e080b090f09/MIUI.us_passion_4.0.3.2.2.3_0xD34D.zip
nhatientri said:
hey mate, is trackball wake function work?
Thanks
Click to expand...
Click to collapse
It sure is. I have a Nexus One with a non-functioning power buttons so this was a must for me to begin with.
woozyking said:
It could be Blackrose, get stock hboot and give it another shot? I haven't started trying this yet, since I need to use my phone to be stable these days, I flashed it back to GB.
Click to expand...
Click to collapse
I completely uninstalled Blackrose and was on stock bootloader. The install was fine, It just kept freezing on the MIUI boot logo. Did you all get a sig verification error when trying to install? I had to toggle the verification process on AmonRA.
Androidity3000 said:
I completely uninstalled Blackrose and was on stock bootloader. The install was fine, It just kept freezing on the MIUI boot logo. Did you all get a sig verification error when trying to install? I had to toggle the verification process on AmonRA.
Click to expand...
Click to collapse
Got the verification error in clockwork too, disabled, flashed. Got stuck on the boot logo. Flashed 2.2.3 again and everything was messed up badly, apps force closing all over the place and what not. Going to try with a stock hboot later since my phone is messed up anyway. And yeah, I'm the kind of guy who prefers to setup everything from scratch once or twice a year when stuff breaks instead of wasting time with backups every couple of days when I flash something different
Androidity3000 said:
I completely uninstalled Blackrose and was on stock bootloader. The install was fine, It just kept freezing on the MIUI boot logo. Did you all get a sig verification error when trying to install? I had to toggle the verification process on AmonRA.
Click to expand...
Click to collapse
Have you verified the MD5 hash against: 62002bddc589f73b01ca0102ba501efb
---------- Post added at 12:13 AM ---------- Previous post was at 12:05 AM ----------
lithium76 said:
Just a heads up, this has been my daily runner for 4 days now. Well MIUI ICS that is. I started working on this when 2.1.20 was available for the Nexus S and 2.2.3 seems to be the most stable yet.
I have no problem using this on a day to day basis.
Click to expand...
Click to collapse
That's good to know
However after using the other two ICS builds (Texas and MeDroid), I realized that without that single barcode scanner functionality I can't even do my daily work (and really don't want to just turn off 2-step verification of all Google product for that)
Yet multi-account chat on Google Talks really tastes good! Interested to see if someone has ported the ICS version to GB yet.
---------- Post added at 12:14 AM ---------- Previous post was at 12:13 AM ----------
nhatientri said:
hey mate, is trackball wake function work?
Thanks
Click to expand...
Click to collapse
I installed it for a brief moment and everything was natural - so yes, I think I did not notice the oddness of not using the trackball to wake the phone.
Not enough storage
Sent from my Nexus One using XDA App
Error (509)
This account's public links are generating too much traffic and have been temporarily disabled!
last time I tried Miui ICS, I needed to flash a weekly first. (Galnet)
Sent from my Nexus One using Tapatalk
Androidity3000 said:
I completely uninstalled Blackrose and was on stock bootloader. The install was fine, It just kept freezing on the MIUI boot logo. Did you all get a sig verification error when trying to install? I had to toggle the verification process on AmonRA.
Click to expand...
Click to collapse
Hi,
I may be wrong here,,, but when you say STOCK BOOTLOADER, have you also
put back the STOCK PARTITION,,, as per me it is just not enough to remove Blacrose.... In the Blackrose thread you will find the partition sizes for different roms,,, for MIUI its different... i dont have it offhand,, but you can do a search and find it as it is in one of the posts... so IF THIS IS TRUE,, then MIUI will always get stuck at the X or MIUI boot logo. So you need to flash the partition with appropriate size for MIUI.
Maybe i am wrong, but there is no harm in trying....
regards
greg
Sorry Verizon peeps, but this is only for the Moto X Force.
Link To Main Thread
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About
The WinDroid Toolkit is a Windows program built in Visual Studio using the C# programming language that simplifies the rooting process for many Android devices. The toolkit makes it easy to unlock your bootloader, flash a custom recovery and gain permanent root. It also includes other functions such as flashing kernels, pushing files and installing apps. If you find it helpful, give me a thanks and a donation if you can. If you find a bug or have a feature request, feel free to leave a reply. Thanks!
Download
WinDroid Toolkit
Changelog
Check out this document for current and past changelogs.
Supported Devices
Check out this spreadsheet for a list of currently supported devices.
Device not supported? Make a request here!
Contribute
Check out the source code on GitHub here.
Disclaimers
Please do not post, mirror, or take credit for this toolkit or any related work without explicit permission.
I am in no way responsible for any harm, damage, nuclear fission or bee infestation that may occur to your device through the use of this toolkit.
Reserved
Reserved.
Maybe not the right place to ask, but why is there not a separate Moto X Force forum? If things like this aren't compatible enough to be interchangeable it seems like that would be a good idea. My previous device was an HTC One M8 and the Verizon version of that had it's own forum specifically because there were things that would work on one that wouldn't work on another...
Tangent_ said:
Maybe not the right place to ask, but why is there not a separate Moto X Force forum? If things like this aren't compatible enough to be interchangeable it seems like that would be a good idea. My previous device was an HTC One M8 and the Verizon version of that had it's own forum specifically because there were things that would work on one that wouldn't work on another...
Click to expand...
Click to collapse
+1. Why is this on the Verizon Droid Turbo 2 Forum if it's useless for Verizon? Am I missing something?
dlscott1111 said:
+1. Why is this on the Verizon Droid Turbo 2 Forum if it's useless for Verizon? Am I missing something?
Click to expand...
Click to collapse
Because Turbo 2 and Moto X Force are basically the same device. Hopefully someone will figure out how to unlock Turbo 2 bootloader then we can have unified custom roms for both.
Zeljko1234 said:
Because Turbo 2 and Moto X Force are basically the same device. Hopefully someone will figure out how to unlock Turbo 2 bootloader then we can have unified custom roms for both.
Click to expand...
Click to collapse
Doesn't matter, they're not interchangeable and need separate forums.
WarEagleUS said:
Doesn't matter, they're not interchangeable and need separate forums.
Click to expand...
Click to collapse
Have you requested via this?
New Device Forum Requests
Boot loader unlock fit this phone is not going to happen. Verizon has royally screwed people like us. Only devices you can root and unlock on Verizon anymore are nexus devices.
Is there an updated version that fixes all the issues like upside down TWRP yet? I am still cautious about rooting my X Force until I am sure it's safe(ish) and is reversible for warranty porpoises.
deadman3000 said:
Is there an updated version that fixes all the issues like upside down TWRP yet? I am still cautious about rooting my X Force until I am sure it's safe(ish) and is reversible for warranty porpoises.
Click to expand...
Click to collapse
An official build for the Force is now available here and it'll be updated in the toolkit ASAP.
WinDroid Toolkit v3.0 Is Now Out!
WinDroid Toolkit v3.0 has been released! It's a huge update with a material redesign, major recode and support for 43 new devices!
You can out more specific changes in the changelog here.
You can download the new update here.
All versions before v3.0 will not have their files updated anymore since I've moved from hosting on BasketBuild to Amazon S3. Please update to v3.0 to ensure you're getting the latest recovery and root files!
LenAsh said:
Have you requested via this?
New Device Forum Requests
Click to expand...
Click to collapse
Already tried. But mod seems to be thinking that both devices are the same - which is not true as in every single thread it says "mot x force only, don't use this on drod turbo 2"
Suggestion to every X Force owner
Lets put new forum request in this thread. Hopefully someone. will listen.
http://forum.xda-developers.com/showthread.php?t=1660354&page=2016
blkhrt13 said:
Boot loader unlock fit this phone is not going to happen. Verizon has royally screwed people like us. Only devices you can root and unlock on Verizon anymore are nexus devices.
Click to expand...
Click to collapse
I used to believe that....until someone unlocked the Turbo 1.
#NeverGiveUpHope
7eregrine said:
I used to believe that....until someone unlocked the Turbo 1.
#NeverGiveUpHope
Click to expand...
Click to collapse
The turbo 1 got unlocked? Pardon me while I have a quick heart attack. Lmao. I used to have that phone. Great device. I'm running the 2 now hoping for at least root. Would love CM 13 though.
First of all, thanks for you great work.
I and having some problems with the app, when I try to install TWRP, it says it was successful but no recovery was installed, when I flash by my own with the liink you provided it works great.
Then I also use the option in your toolkit to install SuperSU but after SuperSU is installed the phone stays at the Motorolla initial logo and freeze there
Mod Edit
bricked phone
Hi guys
Just like the guy above I am also stuck on the moto screen and now I'm worried I have bricked my phone. Can anyone help?
Thanks in advance
liquid_dreams said:
Hi guys
Just like the guy above I am also stuck on the moto screen and now I'm worried I have bricked my phone. Can anyone help?
Thanks in advance
Click to expand...
Click to collapse
Don't worry, I obtain the solution. First of all, download this. Is the unsupersu.zip. With this, you will eliminate the bootloop with the motorola logo.
http://forum.xda-developers.com/attachment.php?attachmentid=3528363&d=1446472307
Try to flash with recovery. Then, you will enter to you android without supersu flashed. I tried 20 versions of supersu, and then, I found one. Download this: BETA-SuperSU-v2.62-3-20151211162651.zip on supersu web, flash it, and then, you will obtain supersu
***Sorry, my english is a little bit.. Strange. If you don't understand something, please, tell me***
Sent from my XT1580 using XDA-Developers mobile app
---------- Post added at 05:36 PM ---------- Previous post was at 05:31 PM ----------
arturox said:
First of all, thanks for you great work.
I and having some problems with the app, when I try to install TWRP, it says it was successful but no recovery was installed, when I flash by my own with the liink you provided it works great.
Then I also use the option in your toolkit to install SuperSU but after SuperSU is installed the phone stays at the Motorolla initial logo and freeze there
Click to expand...
Click to collapse
Look my last "post" in that post. I solve this problem.
*** Sorry, my english is a little bit... Strange. If you don't understand something, please, tell me***
Sent from my XT1580 using XDA-Developers mobile app
victorpececito said:
Don't worry, I obtain the solution. First of all, download this. Is the unsupersu.zip. With this, you will eliminate the bootloop with the motorola logo.
http://forum.xda-developers.com/attachment.php?attachmentid=3528363&d=1446472307
Try to flash with recovery. Then, you will enter to you android without supersu flashed. I tried 20 versions of supersu, and then, I found one. Download this: BETA-SuperSU-v2.62-3-20151211162651.zip on supersu web, flash it, and then, you will obtain supersu
***Sorry, my english is a little bit.. Strange. If you don't understand something, please, tell me***
Sent from my XT1580 using XDA-Developers mobile app
---------- Post added at 05:36 PM ---------- Previous post was at 05:31 PM ----------
Look my last "post" in that post. I solve this problem.
*** Sorry, my english is a little bit... Strange. If you don't understand something, please, tell me***
Sent from my XT1580 using XDA-Developers mobile app
Click to expand...
Click to collapse
I've no idea what I did but my phone wouldn't even be recognised by usb. In the end I managed to find a stock EU android zip, then forced the individual files onto my phone. So no SU yet and I don't want to try again straight away haha!
Will I brick my phone if I try to root DT2 using this tool?
GALAXY GRAND PRIME G531F MASTER THREAD
This thread is to help you track every devlopment on SM-G531F
This device has very limited development and that too is scattered around so I am trying to make a list of working stuff
That works on this device
[emoji815] Rom
Stock
[emoji117] You can get stock rom at sammobile.com
Custom
[emoji117] No custom rom till now but devlopment on miui 8 is on
Miui8 (under devlopment ) currently not working on our dev
[emoji815] Kernel
Stock
[emoji117] Stock kernel
Custom kernel
[emoji117] Get it here
[emoji815] Recovery
Stock
[emoji117] Stock recovery
[emoji117] Odin flashable stock recovery
Custom
[emoji117] Twrp 2.8 official
[emoji117] Twrp 3.0 unofficial actually it's for g531m but works awesome on our device
[emoji117] TWRP 3.0.2
[emoji815] Root Methods
[emoji117] Pre-rooted firmware
[emoji117] SuperSu
[emoji815] Xposed framework
Use this guide
[emoji117] xposed frameaork on 531f guide
[emoji815] Mods
Custom Boot Animations
[emoji117]Pixel boot animation
[emoji117]Nougat boot animation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I missed anything please let me know
Credits
Custom Kernel @dadziokPL
Custom Recovery TWRP for 2.8
. @dadziokPL for 3.0.2
. @buenajuan300 for TWRP 3.0
Xposed Framework @rovo89
@wanna
Guide on xposed &boot animations @Owen007
Reserved
Thanks for adding my thread and thanks for creating this thread it will help all other users to get all stuff at one place I hope you will keep updating it.
I hope we will soon have a custom ROM
The guy who created custom kernel and twrp 3.0.2 is also working in omni rom but no success hope he will make it
Sent from my SM-G531F using Tapatalk
Hack House said:
The guy who created custom kernel and twrp 3.0.2 is also working in omni rom but no success hope he will make it
Sent from my SM-G531F using Tapatalk
Click to expand...
Click to collapse
Yup I hope he could make one
Owen007 said:
Yup I hope he could make one
Click to expand...
Click to collapse
I don't think so... I also have one more thing to fix in the kernel. Have you guys noticed very high battery usage? I've checked, and it seems like my phone does not go into deep sleep, and the battery just dies really quickly. I'll copy the clean source from Samsung, disable SELinux, and rebuild the kernel, maybe it will fix itself. Overall I'm taking a break for a few days, I'll try to fix the kernel next week.
dadziokPL said:
I don't think so... I also have one more thing to fix in the kernel. Have you guys noticed very high battery usage? I've checked, and it seems like my phone does not go into deep sleep, and the battery just dies really quickly. I'll copy the clean source from Samsung, disable SELinux, and rebuild the kernel, maybe it will fix itself. Overall I'm taking a break for a few days, I'll try to fix the kernel next week.
Click to expand...
Click to collapse
Yea i removed it after one day because my phone died really quickly I was surprised then I again flashed stock rom. Now my device is clean.
Hi guys, I am new do xdadevelopers. I rooted phone yesterday with a prerooted method. Came with a problem that made my phone restart after apps being updated or installed. I did factory reset and solved that problem. In this prerooted method I got APUS. If you can tell me a little more about APUS. What exactly it is? My biggest problem right now is when i try to install twrp through odin on pc and download mode on grand prime, it shows me fail and on phone shows me custom binary blocked by frp lock. As I sad, i am really new to this and i am willing to learn.
So my questions are here:
1. What is APUS? And what do i need it for?
2. Why i need twrp recovery and why i can't install it?
Thanks ahead guys, whenever you can/ if you can
You need restore to original recovery and disable frp
Enviado desde mi SM-G531F mediante Tapatalk
DzonTravolta said:
Hi guys, I am new do xdadevelopers. I rooted phone yesterday with a prerooted method. Came with a problem that made my phone restart after apps being updated or installed. I did factory reset and solved that problem. In this prerooted method I got APUS. If you can tell me a little more about APUS. What exactly it is? My biggest problem right now is when i try to install twrp through odin on pc and download mode on grand prime, it shows me fail and on phone shows me custom binary blocked by frp lock. As I sad, i am really new to this and i am willing to learn.
So my questions are here:
1. What is APUS? And what do i need it for?
2. Why i need twrp recovery and why i can't install it?
Thanks ahead guys, whenever you can/ if you can
Click to expand...
Click to collapse
Hello DZON wlecome to XDA Developers. I dont know what apus is I guess its a launcher.
Read this how to flash twrp:-
1. Frp lock is a security which dont let u flash some other unofficial frimwares and stuff.
2. You need to remove your all google accounts and then put your device in download mode and flash twrp with odin.
3. But if u again add google account again after flashing twrp ur device will get locked.
4. So theres a method to off frp lock forever. See this link:-
http://forum.xda-developers.com/and...k-enabling-t3456538/post68563832#post68563832
see my signature down this post. and tell me if u find them usefull.
Labestiajaker said:
You need restore to original recovery and disable frp
Enviado desde mi SM-G531F mediante Tapatalk
Click to expand...
Click to collapse
How to do that?
Is it easy and i can find tutorial on google?
Thanks man, for this awesome fast reply
---------- Post added at 01:14 PM ---------- Previous post was at 01:05 PM ----------
Owen007 said:
Hello DZON wlecome to XDA Developers. I dont know what apus is I guess its a launcher.
Read this how to flash twrp:-
1. Frp lock is a security which dont let u flash some other unofficial frimwares and stuff.
2. You need to remove your all google accounts and then put your device in download mode and flash twrp with odin.
3. But if u again add google account again after flashing twrp ur device will get locked.
4. So theres a method to off frp lock forever. See this link:-
http://forum.xda-developers.com/and...k-enabling-t3456538/post68563832#post68563832
see my signature down this post. and tell me if u find them usefull.
Click to expand...
Click to collapse
Wow you guys are unbelievable!!
First i need to remove google account and then go with method by number 4 you posted?
And does that mean i can't use google account after doing what you told me?
If anyone else knows, do i need APUS launcher, or is there any better out there?
Thanks man so much for replying!
DzonTravolta said:
How to do that?
Is it easy and i can find tutorial on google?
Thanks man, for this awesome fast reply
---------- Post added at 01:14 PM ---------- Previous post was at 01:05 PM ----------
Wow you guys are unbelievable!!
First i need to remove google account and then go with method by number 4 you posted?
And does that mean i can't use google account after doing what you told me?
If anyone else knows, do i need APUS launcher, or is there any better out there?
Thanks man so much for replying!
Click to expand...
Click to collapse
Yes remove google account and follow step 4. After the step 4 is completed you can add google account by the app quickshortcutmaker as described in 4th step.
Have any problem pm me if i helped u can hit thanks button
P.s remove apus launcher its of no need
---------- Post added at 12:24 PM ---------- Previous post was at 12:20 PM ----------
Go here my thread :- http://forum.xda-developers.com/grand-prime/general/tut-how-to-install-xposed-framework-t3508071
You will find all your answers and install xposed to get some cool feautres
An rom is under development sm-531f soon will get a rom
Hack House said:
Code:
This thread is to help you track every devlopment on SM-G531F
This device has very limited development and that too is scattered around so I am trying to make a list of working stuff
That works on this device
Rom
Stock
*You can get stock rom at sammobile.com
Custom
*No custom rom till now but devlopment on miui 8 is on
Miui8 (under devlopment ) currently not working on our dev
Kernel
Stock
*Stock kernel
Custom kernel
*Get it here
Recovery
Stock
*Stock recovery
*Odin flashable stock recovery
Custom
*Twrp 2.8 official
*Twrp 3.0 unofficial actually it's for g531m but works awesome on our device
*TWRP 3.0.2
Root Methods
*Pre-rooted firmware
*SuperSu
Xposed framework
Use this guide
*xposed frameaork on 531f guide
Stock kernel and recovery are extracted from rom version G531FDDU1APJ2_G531FODD1APJ2_G531FDDU1APJ2_HOME
If I missed anything please tell me
Click to expand...
Click to collapse
hey bro hackhouse make the thread look impressive will help newbie people.
Thanks for feedback
I will try in 2 day
Sent from my SM-G531F using Tapatalk
This device is spreadtrum?
Hack House said:
Thanks for feedback
I will try in 2 day
Sent from my SM-G531F using Tapatalk
Click to expand...
Click to collapse
Thread is looking sweet
Hack House said:
Thanks for feedback
I will try in 2 day
Sent from my SM-G531F using Tapatalk
Click to expand...
Click to collapse
Hey bro add pixel and nougat bootanimation i created for grand prime will be good
Anyone any updates?
Hi Folks,
As title says, beta has been started for BKL-L09C675 for Indian model. Once beta is over or build is stable enough, you may expect the public release. Initially it was for very less number of users but then it was opened for many who all filled the beta request form.
Someone from beta group has shared the update on firmware finder but that is not yet approved for installation as it is bound with IMEI.
Anyone still looking for applying for beta can fill this form if there is a slot, they may add you to the beta program (there are more chances of being able to join beta currently)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
Can you tell us how to download it. I have downloaded the Beta app also. It is not show g any new projects.
Thanks.
Did you try to install beta?
saurabhmhshwr said:
Hi,
Can you tell us how to download it. I have downloaded the Beta app also. It is not show g any new projects.
Thanks.
Click to expand...
Click to collapse
If you registered for beta, it will come directly to updater rather than joining any beta program.
rockonhell said:
Did you try to install beta?
Click to expand...
Click to collapse
Already done. Smooth.
No major bugs yet. Exploring.
shashank1320 said:
Already done. Smooth.
No major bugs yet. Exploring.
Click to expand...
Click to collapse
Why I didnt get update? I think I too had same imei number!! IMEI number from fastboot
rockonhell said:
Why I didnt get update? I think I too had same imei number!! IMEI number from fastboot
Click to expand...
Click to collapse
No. Thats incorrect. Send from about phone info. Fastboot is different IMEI post debranding
shashank1320 said:
If you registered for beta, it will come directly to updater rather than joining any beta program.
Click to expand...
Click to collapse
How to register?? Can you provide the link.
saurabhmhshwr said:
How to register?? Can you provide the link.
Click to expand...
Click to collapse
https://docs.google.com/forms/d/e/1...l79r67iPa6w15Vw4SNooLpmtQ/viewform?usp=pp_url
saurabhmhshwr said:
How to register?? Can you provide the link.
Click to expand...
Click to collapse
Use the Huawei fut app and install it.
shashank1320 said:
No. Thats incorrect. Send from about phone info. Fastboot is different IMEI post debranding
Click to expand...
Click to collapse
If that the case how are we able to receive the ota update pushed through imei number. I have al00 registered imei number how can I get indian l09 675 update.
I guys they are providing beta update through serial number.
Serial number authentication is new method they are trying to enforce. If serial number is used for ota update. I guess we will not receive any update in future.
rockonhell said:
If that the case how are we able to receive the ota update pushed through imei number. I have al00 registered imei number how can I get indian l09 675 update.
I guys they are providing beta update through serial number.
Serial number authentication is new method they are trying to enforce. If serial number is used for ota update. I guess we will not receive any update in future.
Click to expand...
Click to collapse
Did you understand bro what i said?
IMEI is different in Fastboot and about phone info. Initially honor sent a form with serial number but then changed back to imei again. OTA that you are getting is imei based.
Regarding no update, you we will get, I am 200% sure, but on imei. Serial number is not changed in debranding so dont worry.
I have the beta running for 24 hours now.
Please consider sharing the firmware for people outside india / beta program...will it violate NDA?
TASON42 said:
Please consider sharing the firmware for people outside india / beta program...will it violate NDA?
Click to expand...
Click to collapse
Its not allowed, though someone has already shared kn FF. But you can't install as thats bound woth IMEI
Is desktop mode available in the new EMUI 9?
successfully installed BKL-L09C636E3R1P8B108-log (9.0.0.108) from FF with NoCheck Recovery.
I really dont like chinese OEMs' app managing (too many options that duplicates),
and hate huawei lockscreen bcuz it slightly enlarges the picture i set,
and also darkens top and bottom of the screen which make overall lockscreen looks dimmer and dark.
but I can bear all these annoying things with new Camera app.
Still cant believe a software update can make this much difference with same hardware,
since ported oreo camera app for pie AOSP is not stable and takes mediocre pictures.
Cant wait EMUI 9 get Rooted and use this wonderful app with AOSP GSI.
TASON42 said:
successfully installed BKL-L09C636E3R1P8B108-log (9.0.0.108) from FF with NoCheck Recovery.
I really dont like chinese OEMs' app managing (too many options that duplicates),
and hate huawei lockscreen bcuz it slightly enlarges the picture i set,
and also darkens top and bottom of the screen which make overall lockscreen looks dimmer and dark.
but I can bear all these annoying things with new Camera app.
Still cant believe a software update can make this much difference with same hardware,
since ported oreo camera app for pie AOSP is not stable and takes mediocre pictures.
Cant wait EMUI 9 get Rooted and use this wonderful app with AOSP GSI.
Click to expand...
Click to collapse
How did you flash?
Narasimha12 said:
How did you flash?
Click to expand...
Click to collapse
uh....sir? Can you plz at least read the VERY FIRST sentence?
DL from FF, install with NoCheck Recovery?
TASON42 said:
uh....sir? Can you plz at least read the VERY FIRST sentence?
DL from FF, install with NoCheck Recovery?
Click to expand...
Click to collapse
Hey sorry, I read it though.. somewhere I read that the beta program file contains just one, not three and flashing that resulted in bootloop for BKL-L09C675.. I think u need to have 3 files in order for Nocheck recovery to work.
Narasimha12 said:
Hey sorry, I read it though.. somewhere I read that the beta program file contains just one, not three and flashing that resulted in bootloop for BKL-L09C675.. I think u need to have 3 files in order for Nocheck recovery to work.
Click to expand...
Click to collapse
It's missing the public data zip.
Image given below. It would be really helpful if someone explained this to me
SimpleNeeds said:
Image given below. It would be really helpful if someone explained this to me
Click to expand...
Click to collapse
You forgot to attach the image.
User699 said:
You forgot to attach the image.
Click to expand...
Click to collapse
Ahh ****... did a split screen for better viewing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SimpleNeeds said:
Ahh ****... did a split screen for better viewingView attachment 5285997
Click to expand...
Click to collapse
There is a problem with API which expired in latest stable Magisk.
Canary Magisk have it fixed. Check here.
Retrial said:
There is a problem with API which expired in latest stable Magisk.
Canary Magisk have it fixed. Check here.
Click to expand...
Click to collapse
So I should install Canary magisk? Damn I installed magisk Canary app and it shows success now.. is that it out should I flash any modules or anything?
SimpleNeeds said:
So I should install Canary magisk? Damn I installed magisk Canary app and it shows success now.. is that it out should I flash any modules or anything?
Click to expand...
Click to collapse
No need to flash anything, just the Canary Magisk app. The issue will get fixed in next Stable release too.
Retrial said:
No need to flash anything, just the Canary Magisk app. The issue will get fixed in next Stable release too.
Click to expand...
Click to collapse
Thanks man... Last doubt (forgive my ignorance for knowledge) magisk Canary is the beta build of OG magisk right? Or is it something different
SimpleNeeds said:
Thanks man... Last doubt (forgive my ignorance for knowledge) magisk Canary is the beta build of OG magisk right? Or is it something different
Click to expand...
Click to collapse
Yeah, something like a "Beta".
Retrial said:
Yeah, something like a "Beta".
Click to expand...
Click to collapse
Got it man....
Heads up ..
Retrial said:
Yeah, something like a "Beta".
Click to expand...
Click to collapse
Bro, now the safety net passes in magisk but fails in the safety net app... What's this?
Device is uncertified in play store.. how do I work this out?
SimpleNeeds said:
Bro, now the safety net passes in magisk but fails in the safety net app... What's this?View attachment 5288865View attachment 5288867
Device is uncertified in play store.. how do I work this out?
Click to expand...
Click to collapse
what ROM do you use?
EDIT: I saw in other thread of yours, you are in Official MIUI, you just unlocked bootloader. Well in Official when u unlock bootloader and stay there the device will say uncertified. You can use other ROM with the "proper changes" build in to have ur device certified. If you wanna stay on Official and have certified your device you need to lock again ur bootloader I guess. OR you can use the module Magisk Hide Props Config.
Retrial said:
what ROM do you use?
EDIT: I saw in other thread of yours, you are in Official MIUI, you just unlocked bootloader. Well in Official when u unlock bootloader and stay there the device will say uncertified. You can use other ROM with the "proper changes" build in to have ur device certified. If you wanna stay on Official and have certified your device you need to lock again ur bootloader I guess. OR you can use the module Magisk Hide Props Config.
Click to expand...
Click to collapse
Yeah did that and it worked...
Scared me once cuz I even thought of locking bootloader and there was this guy who said if you lock the bootloader you can't unlock again and it'll brick lmao. Hey and can you tell me the list of all items you could delete from the root directory. As you know that miui takes up all of root directory's storage space. And I kind of deleted some impo files which included Android system web view(no worries I installed web view canary and now it's working fine lol). I deleted files from system/product/app where there was web view thingy. What's your suggestion?
This is where I deleted the web view folder lol. What do you say?
SimpleNeeds said:
Yeah did that and it worked...
View attachment 5289485View attachment 5289487View attachment 5289489
Scared me once cuz I even thought of locking bootloader and there was this guy who said if you lock the bootloader you can't unlock again and it'll brick lmao. Hey and can you tell me the list of all items you could delete from the root directory. As you know that miui takes up all of root directory's storage space. And I kind of deleted some impo files which included Android system web view(no worries I installed web view canary and now it's working fine lol). I deleted files from system/product/app where there was web view thingy. What's your suggestion?
View attachment 5289491
This is where I deleted the web view folder lol. What do you say?
Click to expand...
Click to collapse
I switched from Official ROM long ago, since MIUI 12 update.
I recommend you to switch in a custom ROM too.
MIUI is bloated, apps running in background send data to chinese servers, privacy nightmare, low battery life, bugs, slow updates in security patches (and I guess no more updates) and with the latest updates they slowed down the performance in purpose. Oh...and still Android 10
Retrial said:
I switched from Official ROM long ago, since MIUI 12 update.
I recommend you to switch in a custom ROM too.
MIUI is bloated, apps running in background send data to chinese servers, privacy nightmare, low battery life, bugs, slow updates in security patches (and I guess no more updates) and with the latest updates they slowed down the performance in purpose. Oh...and still Android 10
Click to expand...
Click to collapse
Same bruh but I'm dying to get the raise to wake and ir as fast as in miui. Do you know of any roms which have Deez? Like just raise the phone and you just teleport to the home screen without triggering the lock screen. I want that quality update but I can't find it anywhere
Edit: hey what if I did some build prop tweaking, can I get the raise to wake?
SimpleNeeds said:
Same bruh but I'm dying to get the raise to wake and ir as fast as in miui. Do you know of any roms which have Deez? Like just raise the phone and you just teleport to the home screen without triggering the lock screen. I want that quality update but I can't find it anywhere
Edit: hey what if I did some build prop tweaking, can I get the raise to wake?
Click to expand...
Click to collapse
I guess ROMs with a lot of customizations such as crDroid, HavocOS, EvoX, Fluid, AEX, etc. may have it. Check their features or ask about it in the proper threads or on their telegrams.
Retrial said:
I switched from Official ROM long ago, since MIUI 12 update.
I recommend you to switch in a custom ROM too.
MIUI is bloated, apps running in background send data to chinese servers, privacy nightmare, low battery life, bugs, slow updates in security patches (and I guess no more updates) and with the latest updates they slowed down the performance in purpose. Oh...and still Android 10
Click to expand...
Click to collapse
Yeah man
Retrial said:
I guess ROMs with a lot of customizations such as crDroid, HavocOS, EvoX, Fluid, AEX, etc. may have it. Check their features or ask about it in the proper threads or on their telegrams.
Click to expand...
Click to collapse
Did check em all but none is as good as in miui.. that's why I bore with the buggies and stupid ass ads and notifs of miui. Cuz that feature was more prioritised for me.. anyways I hopped to pe plus now... Although it isn't there and the ir takes a second, I guess it's worth the shot