Related
Hi All,
I have successfully rooted my devise ( Moto E) and continued using on it. Accidentally i have wiped all data in internal storage ( including OS) . Now my devise is without OS, can anyone plz guide me to install OS in my mobile.
I have team win on my phone. I went to factory reset which lead me to team win, and I choose to delete everything and didn't realize there was operating system in it too.
How can I reinstall my Android OS?
you may check this thread - http://forum.xda-developers.com/moto-e/general/guide-one-moto-e-beginners-guide-t2807891
akxt1022 said:
you may check this thread - http://forum.xda-developers.com/moto-e/general/guide-one-moto-e-beginners-guide-t2807891
Click to expand...
Click to collapse
i have rooted my devise with the above mentioned guide, now i want the OS zip or ISO file to flash it on my devise, So kind full to guide me where to download the OS.
Thanks in advance
Yuviprince said:
i have rooted my devise with the above mentioned guide, now i want the OS zip or ISO file to flash it on my devise, So kind full to guide me where to download the OS.
Thanks in advance
Click to expand...
Click to collapse
You will need to flash using fastboot.
There is a guide in general section describing the process.
You will need the fastboot files for your device. Find those and its fairly simple to flash.
Tapped from my Moto X
Yuviprince said:
i have rooted my devise with the above mentioned guide, now i want the OS zip or ISO file to flash it on my devise, So kind full to guide me where to download the OS.
Thanks in advance
Click to expand...
Click to collapse
There are lot of OS i.e. ROMs available on the Moto E forum. You can download one of them its your choice !!!
Btw i like cm 12.1 and Temasek 1.8
Sent from my Moto E using Tapatalk
Do this
1)Power off your phone
2)remove the sd card
3)Use a card reader and copy paste the rom and gapps file from your pc ( if you have one)
or download rom and gapps from device and move thm in your phone.
4)nsert the memory card back
5)boot into recovery by pressing "VOLUME DOWN and POWER KEY"
and flash the rom
DONE!!
Im assuming you know how to flash the ROM
So, my end goal is to have Resurrection remix marshmallow running on my D6503 Z2. I guess I made the mistake of updating the phone to the stock Marshmallow ROM from sony so I can not find a way to root the phone. So is there a step by step guide on how I could possibly root and add a recovery tool?
DarkEvE said:
So, my end goal is to have Resurrection remix marshmallow running on my D6503 Z2. I guess I made the mistake of updating the phone to the stock Marshmallow ROM from sony so I can not find a way to root the phone. So is there a step by step guide on how I could possibly root and add a recovery tool?
Click to expand...
Click to collapse
Have you got an unlocked bootloader?
If so, flash a custom kernel with a recovery and install your chosen rom?
If you have a locked bootloader you can't run a custom rom, like resurrection remix.
Regards,
Mohamed
moman2000 said:
Have you got an unlocked bootloader?
If so, flash a custom kernel with a recovery and install your chosen rom?
If you have a locked bootloader you can't run a custom rom, like resurrection remix.
Regards,
Mohamed
Click to expand...
Click to collapse
I do not have a unlocked bootloader but the issue is all the tutorials assume you have the lolipop version of android on the Z2 running with root. If I can't find out how to root on 6.0.1 on the Z2 then its kinda pointless..
To root mm, downgrade to lollipop or kitkat and follow a guide. If you don't want to downgrade, unlock you bootloader.
They are your options. This had been asked. This has been answered. Use the search.
Sent from my D6503 using Tapatalk
DarkEvE said:
I do not have a unlocked bootloader but the issue is all the tutorials assume you have the lolipop version of android on the Z2 running with root. If I can't find out how to root on 6.0.1 on the Z2 then its kinda pointless..
Click to expand...
Click to collapse
All you have to do is downgrade to 23.1.A.1.28 using flash tool, there are many threads on how to use it, have a search!
And use this thread which can be found
Here that will allow you to root your phone!
After that install XZDualrecovery,backup your ROM and flash resurrection remix!
Regards,
Mohamed
moman2000 said:
All you have to do is downgrade to 23.1.A.1.28 using flash tool, there are many threads on how to use it, have a search!
And use this thread which can be found
Here that will allow you to root your phone!
After that install XZDualrecovery,backup your ROM and flash resurrection remix!
Regards,
Mohamed
Click to expand...
Click to collapse
Ill give that a go then. Thanks a lot.
DarkEvE said:
Ill give that a go then. Thanks a lot.
Click to expand...
Click to collapse
No problem! Good luck!
ok so i got it rooted and put the recovery mods on but after i flashed the phone with the Resurrection remix rom now the phone wont turn on? apparently its called sleep of death or something..
moman2000 said:
No problem! Good luck!
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934548703 <- Where i downloaded the rom
http://forum.xda-developers.com/xperia-z2/help/how-to-rrot-z2-marshmellow-t3384384< Followed this guide
Yet when i flash the following in that order - Rom, Gapps and the bootfix then do the wipe cache the phone does not boot up. When the power button is pressed the red light just appears then the phone stays off :/
moman2000 said:
No problem! Good luck!
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934548703 <- Where i downloaded the rom
http://forum.xda-developers.com/xperia-z2/help/how-to-rrot-z2-marshmellow-t3384384< Followed this guide
Yet when i flash the following in that order - Rom, Gapps and the bootfix then do the wipe cache the phone does not boot up. When the power button is pressed the red light just appears then the phone stays off :/
DarkEvE said:
https://www.androidfilehost.com/?fid=95916177934548703 <- Where i downloaded the rom
http://forum.xda-developers.com/xperia-z2/help/how-to-rrot-z2-marshmellow-t3384384< Followed this guide
Yet when i flash the following in that order - Rom, Gapps and the bootfix then do the wipe cache the phone does not boot up. When the power button is pressed the red light just appears then the phone stays off :/
Click to expand...
Click to collapse
When you say boot fix, what do you mean?
moman2000 said:
When you say boot fix, what do you mean?
Click to expand...
Click to collapse
well there is a file that i downloaded from that link i provided on the tutorial which says z2's suffer from a "bootloop" issue so you have to flash this file after installing the rom apparently
DarkEvE said:
well there is a file that i downloaded from that link i provided on the tutorial which says z2's suffer from a "bootloop" issue so you have to flash this file after installing the rom apparently
Click to expand...
Click to collapse
Step : 0
Backup Ur Personal Data,
Step : 1
Download Your resurrection rom and gapps
Copy it to your phone sd card
Step : 2
Download Stock Lollipop Rom From HERE Select Version 23.4.A.1.264
Then Flash It via Flashtool
Step : 3
Then Latest Version of KingRoot from here
Install king root on ur stock lollipop rom and make sure ur internet connection is stable and open kingroot and root it.(It'll take 1-2 min)
Step : 4
After that download this XZDualRecovery From here
Extract recovery.zip on ur windows and run install.bat type 4 let it install adb driver on windows after that type 1 and press enter. And Then It'll boot into Recovery.
Step : 5
Go to TWRP Recovery Settings and (tick Use rm -rf instead of formatting). It's optinal. If u don't tick this setting then wiping device will take more than a few minute.
Wipe Everything Except Device storage where u put prerooted mm rom and bootlop fix.
Step : 6
Flash resurrection rom then gapps and reboot device.
moman2000 said:
Step : 0
Backup Ur Personal Data,
Step : 1
Download Your resurrection rom and gapps
Copy it to your phone sd card
Step : 2
Download Stock Lollipop Rom From HERE Select Version 23.4.A.1.264
Then Flash It via Flashtool
Step : 3
Then Latest Version of KingRoot from Here
Install king root on ur stock lollipop rom and make sure ur internet connection is stable and open kingroot and root it.(It'll take 1-2 min)
Step : 4
After that download this XZDualRecovery From Here Original Thread
Extract recovery.zip on ur windows and run install.bat type 4 let it install adb driver on windows after that type 1 and press enter. And Then It'll boot into Recovery.
Step : 5
Go to TWRP Recovery Settings and (tick Use rm -rf instead of formatting). It's optinal. If u don't tick this setting then wiping device will take more than a few minute.
Wipe Everything Except Device storage where u put prerooted mm rom and bootlop fix.
Step : 6
Flash Prerooted mm rom then bootloop fix and reboot device.
Click to expand...
Click to collapse
still doesnt work :/ I still get that sleep of death issue thing
DarkEvE said:
still doesnt work :/
Click to expand...
Click to collapse
I forgot to add the links, I have also changed the steps so it works for you:
Step : 0
Backup Ur Personal Data,
Step : 1
Download Your resurrection rom and gapps
Copy it to your phone sd card
Step : 2
Download Stock Lollipop Rom From HERE Select Version 23.4.A.1.264
Then Flash It via Flashtool
Step : 3
Then Latest Version of KingRoot from here
Install king root on ur stock lollipop rom and make sure ur internet connection is stable and open kingroot and root it.(It'll take 1-2 min)
Step : 4
After that download this XZDualRecovery From here
Extract recovery.zip on ur windows and run install.bat type 4 let it install adb driver on windows after that type 1 and press enter. And Then It'll boot into Recovery.
Step : 5
Go to TWRP Recovery
Wipe Everything Except Device storage where u put the rom and gapps.
Step : 6
Flash resurrection rom then gapps and reboot device.
yea i tried but still no dice
moman2000 said:
I forgot to add the links, I have also changed the steps so it works for you:
Step : 0
Backup Ur Personal Data,
Step : 1
Download Your resurrection rom and gapps
Copy it to your phone sd card
Step : 2
Download Stock Lollipop Rom From HERE Select Version 23.4.A.1.264
Then Flash It via Flashtool
Step : 3
Then Latest Version of KingRoot from here
Install king root on ur stock lollipop rom and make sure ur internet connection is stable and open kingroot and root it.(It'll take 1-2 min)
Step : 4
After that download this XZDualRecovery From here
Extract recovery.zip on ur windows and run install.bat type 4 let it install adb driver on windows after that type 1 and press enter. And Then It'll boot into Recovery.
Step : 5
Go to TWRP Recovery
Wipe Everything Except Device storage where u put the rom and gapps.
Step : 6
Flash resurrection rom then gapps and reboot device.
Click to expand...
Click to collapse
yea i tried but still no dice
DarkEvE said:
yea i tried but still no dice
Click to expand...
Click to collapse
what does not work, the root process?
moman2000 said:
what does not work, the root process?
Click to expand...
Click to collapse
well i follow each step till the end but when i reboot the device after flashing everything the phone doesnt boot up so i need to flash the stock rom again so its like back to square one...
DarkEvE said:
well i follow each step till the end but when i reboot the device after flashing everything the phone doesnt boot up so i need to flash the stock rom again so its like back to square one...
Click to expand...
Click to collapse
IS your bootloader unlocked?
K6 POWER SOFTWARE UPDATE LINKS
s156 to s223 download link: http://phonedl.ota.lenovomm.com/dls/v6/K33_S156_170220_ROW_TO_K33_S223_170610_ROW_WC460DDB76.zip
(Thanks to NanuZn)
s222 to s223 download link:
http://phonedl.ota.lenovomm.com/dls/v6/K33_S222_170523_ROW_TO_K33_S223_170610_ROW_WCD418A4CF.zip
(Thanks to EthannSiva)
s156 to s222 download link: https://www.androidfilehost.com/?fid=745425885120738879
(Thanks to Karthick)
s150 to s156 download link:
http://phonedl.ota.lenovomm.com/dls/v6/K33_S150_161114_ROW_TO_K33_S156_170220_ROW_WCB6723108.zip
( Note: 1.Use stock recovery to flash... Rename ota.zip to update.zip... Put that update.zip file in root of sd card. 2. If you want to flash using twrp recovery, you need to edit updater-script to do so.)
UNLOCK BOOTLOADER SIMPLE GUIDE
Enable adb and OEM options in developer settings and conect your k6 via usb(also you need to download adb and fastboot utilities for your PC).
in CMD or a GNU/Linux Terminal you will need paste one per one line.
Code:
adb reboot bootloader
fastboot -i 0x17ef oem device-info echo "check bl"
fastboot -i 0x17ef oem unlock-go
INSTALL RECOVERY
You can get the recovery from karthick thread:
https://forum.xda-developers.com/android/development/recovery-twrp-3-0-2-lenovo-vibe-k6-t3618912
Code:
fastboot -i 0x17ef flash recovery <recovery Name>.img
ROOT
just flash super su zip from chainfire in your recovery
You can find it here:
http://www.supersu.com/download
How to flash stock s156-s223 nougat OTA zip using TWRP recovery?
1. open OTA zip file in X-plore file manager..
2. Go to folder meta-inf/com/google/Android where updater-script has been located
3. Open updater-script as a txt(text) file in X-plore file manager & delete first & second line. (Stop when word ui-print come)
4. Go to menu, save it.. it will take several seconds/minutes to get saved changes.
5. Go to TWRP recovery & flash.
6. Enjoy stock nougat 7.0 for Lenovo k6 power.
OUR TELEGRAM GROUP
https://t.me/joinchat/AAAAAEPrej6nmzca5GK_fw
MANY THANKS FOR OUR COMMUNITY ON TELGRAM AND; @siva1234
STR4NG3R-GUY said:
K6 POWER SOFTWARE UPDATE LINKS
s156 to s223 download link: http://phonedl.ota.lenovomm.com/dls/v6/K33_S156_170220_ROW_TO_K33_S223_170610_ROW_WC460DDB76.zip
(Thanks to NanuZn)
s222 to s223 download link:
http://phonedl.ota.lenovomm.com/dls/v6/K33_S222_170523_ROW_TO_K33_S223_170610_ROW_WCD418A4CF.zip
(Thanks to EthannSiva)
s156 to s222 download link: https://www.androidfilehost.com/?fid=745425885120738879
(Thanks to Karthick)
s150 to s156 download link:
http://phonedl.ota.lenovomm.com/dls/v6/K33_S150_161114_ROW_TO_K33_S156_170220_ROW_WCB6723108.zip
( Note: 1.Use stock recovery to flash... Rename ota.zip to update.zip... Put that update.zip file in root of sd card. 2. If you want to flash using twrp recovery, you need to edit updater-script to do so.)
UNLOCK BOOTLOADER SIMPLE GUIDE
Enable adb developer settings and conect your k6 via usb(also you need to download adb and fastboot utilities).
INSTALL RECOVERY
You can get the recovery from karthick thread:
https://forum.xda-developers.com/android/development/recovery-twrp-3-0-2-lenovo-vibe-k6-t3618912
ROOT
just flash super su zip from chainfire in your recovery
How to flash stock s156-s223 nougat OTA zip using TWRP recovery?
1. open OTA zip file in X-plore file manager..
2. Go to folder meta-inf/com/google/Android where updater-script has been located
3. Open updater-script as a txt(text) file in X-plore file manager & delete first & second line. (Stop when word ui-print come)
4. Go to menu, save it.. it will take several seconds/minutes to get saved changes.
5. Go to TWRP recovery & flash.
6. Enjoy stock nougat 7.0 for Lenovo k6 power.
OUR TELEGRAM GROUP
https://t.me/joinchat/AAAAAEPrej6nmzca5GK_fw
MANY THANKS FOR OUR COMMUNITY ON TELGRAM AND; @siva1234
Click to expand...
Click to collapse
:good:
Useful guide. Do you think bootloader re-lock and flashback stock recovery are also possible?
roti86 said:
Useful guide. Do you think bootloader re-lock and flashback stock recovery are also possible?
Click to expand...
Click to collapse
Yes and yes.
Sorry for the to late reply, if you want install stock recovery download your firmware and flash the recovery via fastboot, but if you want go back to stock flash the firmware via qfil(be careful and make a backup on your external storage if you lost the imei(efs, baseband) you can restore via your backup of TWRP).
recently bought k6 power,It came with marsmallow s150 and asked to update marshmallow s156.It was about 75mb.
After it,asked for nougat s223 which i know that has lots of bugs now.So ignored the update and simply disabled update notification
I'll stick with s156 till there is a clear cut bug free nougat version.No need to install unless i want headache
Lenovo has bad reputation for updating their devices.They ruin the next version of android.Simply disaster.
So I would all advise you to stick with s156.
Bro update to S229 .it has fixed some bugs nd ui becomes smoother then previous.
Hello
I have updated to s229 by system update, i want to go back to s156.
I m on official rom. Can you guys please help?
Can i use the full ota zip to downgrade? If no then, is there any way to get the official link to download rom, i don't trust the rom from other sources and file sharing sites.
Thanks
I never had issue on s 223 even just reset your device after upgrading android ....
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Reserved
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
xperia_bird said:
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
Click to expand...
Click to collapse
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
Code:
dd if=/path/to/partition/ of=/sdcard/or/anything
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
nageen9211 said:
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
Click to expand...
Click to collapse
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Bootlooping
xperia_bird said:
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Click to expand...
Click to collapse
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
[email protected] said:
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
Click to expand...
Click to collapse
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
xperia_bird said:
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
Click to expand...
Click to collapse
Your device and model
[email protected] said:
Your device and model
Click to expand...
Click to collapse
Lenovo Z5, L78011.
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Plz make multirom twrp for moto one
anurag_xpert said:
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Click to expand...
Click to collapse
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
nageen9211 said:
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
Click to expand...
Click to collapse
Thanks for the reply. I have downladed april fastboot flashable rom from Mororola updates (link shared at telegram channel) but when i unpacked it, there was no flash script inside, so I could not flash that stock rom and I am still getting this error.
If you or somebody can share that flashall.bat script, i will be thankful.
edit: managed to flash the latest official firmware using youtube tutorial by andro guruji.
All my data was also safe.
Thanks again.
Will I get official updates after flashing this stock rom??
flashall.bat error
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Directory error
lbcsc.clx said:
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Click to expand...
Click to collapse
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
[email protected] said:
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
Click to expand...
Click to collapse
See the cmd in screenshot below
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
Can you please post the link for the july patch or if possible please provide the link for july full stock rom. I am not able to update via OTP. Tried everything.
nageen9211 said:
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Click to expand...
Click to collapse
hi i am bricked my moto
now i back to fast boot mod
how can i flash stock rom by twrp?
help me
i am horrified to brick my device again
Method 1(Works with locked bootloader)(Convert China Rom to Global)
Part 1
1. Download Global rom Android 10 zip file(You can check wga0's thread for this thanks to wga0 for this file)
2. Put this zip file in ota folder of your internal storage and rename it as update.zip (if there is no ota folder than create it)
3. Dial *#*#1027#*#* click on Local ota and it will start updating your device.
4. Factory reset your device after perform above procedure to avoid any software error.
If above Part 1 don't work for you than try this method
1. Download Android 9 Full ota of china rom
2. Move it on ota folder of your phone's internal storage
3. Rename it to update.zip
4. Dial *#*#1027#*#*
5. Click on Local ota
6. After procedure is complete you might be in recovery mode of your device and in recovery mode wipe device data.By this method you will be downgrade to Android 9.
7. Using your phone's software update install two update first of 87MB and another of 1357MB.
8. After installing this two update just follow part 1 posted above and yoy will be able to install global rom on your china device.
Above method i found on another forum and working on bs2 pro and will also work on bs2 as well.
Below method is tested by me and it's working fine and i converted my device's Global rom to china rom and will also work for converting china rom to global.
Method 2(Require unlocked bootloader)
1.Download rom which you want to install and extract folder in it (there should be 22 img files in it)
2.Download flash-all.zip and extract flashall.bat to the folder in which 22 img files are available
3.Reboot your device to fastboot
4.Double click on flashall.bat file and it will start flashing rom.
Note:Above method will wipe your data.
i am new user and can not add links now so will add links later.
hi bro, do you have any update link for CN firmware, this is my latest firmware now
Hi bro. Do you have link to download?
Will this process breaks ota?
Ksrs1 said:
Method 1(Works with locked bootloader)(Convert China Rom to Global)
Part 1
1. Download Global rom Android 10 zip file(You can check wga0's thread for this thanks to wga0 for this file)
2. Put this zip file in ota folder of your internal storage and rename it as update.zip (if there is no ota folder than create it)
3. Dial *#*#1027#*#* click on Local ota and it will start updating your device.
4. Factory reset your device after perform above procedure to avoid any software error.
If above Part 1 don't work for you than try this method
1. Download Android 9 Full ota of china rom
2. Move it on ota folder of your phone's internal storage
3. Rename it to update.zip
4. Dial *#*#1027#*#*
5. Click on Local ota
6. After procedure is complete you might be in recovery mode of your device and in recovery mode wipe device data.By this method you will be downgrade to Android 9.
7. Using your phone's software update install two update first of 87MB and another of 1357MB.
8. After installing this two update just follow part 1 posted above and yoy will be able to install global rom on your china device.
Above method i found on another forum and working on bs2 pro and will also work on bs2 as well.
Below method is tested by me and it's working fine and i converted my device's Global rom to china rom and will also work for converting china rom to global.
Method 2(Require unlocked bootloader)
1.Download rom which you want to install and extract folder in it (there should be 22 img files in it)
2.Download flash-all.zip and extract flashall.bat to the folder in which 22 img files are available
3.Reboot your device to fastboot
4.Double click on flashall.bat file and it will start flashing rom.
Note:Above method will wipe your data.
Click to expand...
Click to collapse
masruradi said:
hi bro, do you have any update link for CN firmware, this is my latest firmware now
Click to expand...
Click to collapse
hi，bro。can i ask somethings, if CN firmware can install google service? thanks to reply !
Ksrs1 said:
Method 1(Works with locked bootloader)(Convert China Rom to Global)
Part 1
1. Download Global rom Android 10 zip file(You can check wga0's thread for this thanks to wga0 for this file)
2. Put this zip file in ota folder of your internal storage and rename it as update.zip (if there is no ota folder than create it)
3. Dial *#*#1027#*#* click on Local ota and it will start updating your device.
4. Factory reset your device after perform above procedure to avoid any software error.
If above Part 1 don't work for you than try this method
1. Download Android 9 Full ota of china rom
2. Move it on ota folder of your phone's internal storage
3. Rename it to update.zip
4. Dial *#*#1027#*#*
5. Click on Local ota
6. After procedure is complete you might be in recovery mode of your device and in recovery mode wipe device data.By this method you will be downgrade to Android 9.
7. Using your phone's software update install two update first of 87MB and another of 1357MB.
8. After installing this two update just follow part 1 posted above and yoy will be able to install global rom on your china device.
Above method i found on another forum and working on bs2 pro and will also work on bs2 as well.
Below method is tested by me and it's working fine and i converted my device's Global rom to china rom and will also work for converting china rom to global.
Method 2(Require unlocked bootloader)
1.Download rom which you want to install and extract folder in it (there should be 22 img files in it)
2.Download flash-all.zip and extract flashall.bat to the folder in which 22 img files are available
3.Reboot your device to fastboot
4.Double click on flashall.bat file and it will start flashing rom.
Note:Above method will wipe your data.
Click to expand...
Click to collapse
i am newer at here , can i ask about where to find wga0 ? is search at this forum or google seach it?, so sry stupid question!
Ksrs1 said:
Method 1(Works with locked bootloader)(Convert China Rom to Global)
Part 1
1. Download Global rom Android 10 zip file(You can check wga0's thread for this thanks to wga0 for this file)
2. Put this zip file in ota folder of your internal storage and rename it as update.zip (if there is no ota folder than create it)
3. Dial *#*#1027#*#* click on Local ota and it will start updating your device.
4. Factory reset your device after perform above procedure to avoid any software error.
If above Part 1 don't work for you than try this method
1. Download Android 9 Full ota of china rom
2. Move it on ota folder of your phone's internal storage
3. Rename it to update.zip
4. Dial *#*#1027#*#*
5. Click on Local ota
6. After procedure is complete you might be in recovery mode of your device and in recovery mode wipe device data.By this method you will be downgrade to Android 9.
7. Using your phone's software update install two update first of 87MB and another of 1357MB.
8. After installing this two update just follow part 1 posted above and yoy will be able to install global rom on your china device.
Above method i found on another forum and working on bs2 pro and will also work on bs2 as well.
Below method is tested by me and it's working fine and i converted my device's Global rom to china rom and will also work for converting china rom to global.
Method 2(Require unlocked bootloader)
1.Download rom which you want to install and extract folder in it (there should be 22 img files in it)
2.Download flash-all.zip and extract flashall.bat to the folder in which 22 img files are available
3.Reboot your device to fastboot
4.Double click on flashall.bat file and it will start flashing rom.
Note:Above method will wipe your data.
Click to expand...
Click to collapse
Hi. I can't find any ROM with the 22 .img files, where could an image of that type be downloaded?
Thanks for the post
I have black shark 2 pro
My rom is china and my android is 10
I want to convert it to global rom with android 9
But with ota my sensors not working and I must update my android again.
Could anyone please help me?
OTA ERROR
I followed all your steps, but it always give me OTA ERROR on step 5. what should I do?
ryuusei13760 said:
I followed all your steps, but it always give me OTA ERROR on step 5. what should I do?
Click to expand...
Click to collapse
What is build number of your rom?
Ksrs1 said:
What is build number of your rom?
Click to expand...
Click to collapse
AWM-A0
Joyui11 G66T2008030CN00MQ3
Wga0
Ksrs1 said:
Method 1(Works with locked bootloader)(Convert China Rom to Global)
Part 1
1. Download Global rom Android 10 zip file(You can check wga0's thread for this thanks to wga0 for this file)
2. Put this zip file in ota folder of your internal storage and rename it as update.zip (if there is no ota folder than create it)
3. Dial *#*#1027#*#* click on Local ota and it will start updating your device.
4. Factory reset your device after perform above procedure to avoid any software error.
If above Part 1 don't work for you than try this method
1. Download Android 9 Full ota of china rom
2. Move it on ota folder of your phone's internal storage
3. Rename it to update.zip
4. Dial *#*#1027#*#*
5. Click on Local ota
6. After procedure is complete you might be in recovery mode of your device and in recovery mode wipe device data.By this method you will be downgrade to Android 9.
7. Using your phone's software update install two update first of 87MB and another of 1357MB.
8. After installing this two update just follow part 1 posted above and yoy will be able to install global rom on your china device.
Above method i found on another forum and working on bs2 pro and will also work on bs2 as well.
Below method is tested by me and it's working fine and i converted my device's Global rom to china rom and will also work for converting china rom to global.
Method 2(Require unlocked bootloader)
1.Download rom which you want to install and extract folder in it (there should be 22 img files in it)
2.Download flash-all.zip and extract flashall.bat to the folder in which 22 img files are available
3.Reboot your device to fastboot
4.Double click on flashall.bat file and it will start flashing rom.
Note:Above method will wipe your data.
Click to expand...
Click to collapse
i tried this methode, on the screen show, error not authorized..
1.84 GB file on MEGA
mega.nz
jpmacapuna said:
1.84 GB file on MEGA
mega.nz
Click to expand...
Click to collapse
for bs2 pro or bs 2?
Yeah that image worked like a charm! Thank you so much!
Can we convert global to chnise bs2 ? With ota update (locked bootloader) ?
Please give me tutorial
ariewahyu said:
Can we convert global to chnise bs2 ? With ota update (locked bootloader) ?
Please give me tutorial
Click to expand...
Click to collapse
Yes we can and I've already done it.
I can't change from CN ROM to Global ROM, the version posted here by jpmacapuna doesn't work, package unauthorized.
My device is a Black Shark 2 Pro - DLT-A0 build version DLTR2010300CN00MQ4, any help please?
Thank you