welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Reserved
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
xperia_bird said:
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
Click to expand...
Click to collapse
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
Code:
dd if=/path/to/partition/ of=/sdcard/or/anything
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
nageen9211 said:
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
Click to expand...
Click to collapse
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Bootlooping
xperia_bird said:
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Click to expand...
Click to collapse
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
[email protected] said:
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
Click to expand...
Click to collapse
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
xperia_bird said:
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
Click to expand...
Click to collapse
Your device and model
[email protected] said:
Your device and model
Click to expand...
Click to collapse
Lenovo Z5, L78011.
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Plz make multirom twrp for moto one
anurag_xpert said:
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Click to expand...
Click to collapse
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
nageen9211 said:
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
Click to expand...
Click to collapse
Thanks for the reply. I have downladed april fastboot flashable rom from Mororola updates (link shared at telegram channel) but when i unpacked it, there was no flash script inside, so I could not flash that stock rom and I am still getting this error.
If you or somebody can share that flashall.bat script, i will be thankful.
edit: managed to flash the latest official firmware using youtube tutorial by andro guruji.
All my data was also safe.
Thanks again.
Will I get official updates after flashing this stock rom??
flashall.bat error
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Directory error
lbcsc.clx said:
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Click to expand...
Click to collapse
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
[email protected] said:
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
Click to expand...
Click to collapse
See the cmd in screenshot below
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
Can you please post the link for the july patch or if possible please provide the link for july full stock rom. I am not able to update via OTP. Tried everything.
nageen9211 said:
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Click to expand...
Click to collapse
hi i am bricked my moto
now i back to fast boot mod
how can i flash stock rom by twrp?
help me
i am horrified to brick my device again
Related
HERE IS TWRP FOR KITKAT
NOTICE
HTML:
YOUR WARRANTY IS NOW VOID
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE
DOWNLOADS
https://mega.co.nz/#!DM9kBJJA!baKTQHp4KmcYRjV98PWHOlYFjegA_LjiqkVMBaxrSQ4
INSTALLATION PROCESS:
1. CONNECT YOUR DEVICE TO A COMPUTER WHICH HAS ODIN
2. OPEN ODIN ADD THE DOWNLOADED FILE IN AP(PDA) SECTION
3. CLICK ON START(BEFORE THAT UNCHECK AUTOREBOOT)
4. WHEN INSTALLATION COMPLETES AND ODIN WRITES RESET THEN DISSCONNECT YOUR DEVICE
AND TAKE OFF THE BATTERY
5. BOOT TO RECOVERY USING THREE BUTTON METHOD(VOL UP+ HOME+ POWER)
6. CLEAR CACHE AND REBOOT
7. ITS DONE!!!!!!!ENJOY!!!!!
IT WOULD BE VERY GRATEFUL OF YOU IF YOU HIT THE THANKS BUTTON AND APPRECIATE THE WORK IF THIS HELPED:good::fingers-crossed:
PLEASE TEST IT AND TELL ABOUT BUGS
XDA:DevDB Information
TWRP, Tool/Utility for the Samsung Galaxy Grand 2
Contributors
techmate98, ali.filth , techmate98
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2014-08-26
Last Updated 2014-08-28
Reserved
Changelog:
v1.0
initial release
Reserved
Good day, can i request for stock recovery for our grand 2. To avoid flashing the whole firmware when we want to update the device via OTA.
Im requesting stock recovery for kitkat 4.4.2 build G8 and jb4.3
microchip88 said:
Good day, can i request for stock recovery for our grand 2. To avoid flashing the whole firmware when we want to update the device via OTA.
Im requesting stock recovery for kitkat 4.4.2 build G8 and jb4.3
Click to expand...
Click to collapse
Will provide you that too but as i am not on g8 or 4.3 so it will take time
Sent from my SM-G7102 using XDA Premium 4 mobile app
Okay Thnx. Is the recovery different in every kitkat build? Coz now I'm on kitkat G8 build and i flash the CWM NG4 4.4. 2 on top of my build and my CWM is working fine.
microchip88 said:
Okay Thnx. Is the recovery different in every kitkat build? Coz now I'm on kitkat G8 build and i flash the CWM NG4 4.4. 2 on top of my build and my CWM is working fine.
Click to expand...
Click to collapse
Yep. The stockstock recovery is different for each build. If you flash a G4 Stock recovery on a H3 firmware. It WILL flash and you'll be back to to clear data and factory reset too but you won't be able to flash OTA updates. Cause for that, you need the specific stock recovery for your current build.
Please provide the installation guide.
I am on stock NH3 but don't know how to extract stock recovery image. If guided, I can help.
anuajayan said:
Please provide the installation guide.
Click to expand...
Click to collapse
DONE:good::good::good:
microchip88 said:
Good day, can i request for stock recovery for our grand 2. To avoid flashing the whole firmware when we want to update the device via OTA.
Im requesting stock recovery for kitkat 4.4.2 build G8 and jb4.3
Click to expand...
Click to collapse
brother actually i have unrooted my device and returned to stock as i had to give to samsung care as there was some problem coming up in its display sorry but you will have to ask some other member for it
sajidbinraheem said:
I am on stock NH3 but don't know how to extract stock recovery image. If guided, I can help.
Click to expand...
Click to collapse
brother you will hav to first root the set up an sdk on your computer then using adb commands you can get the stock boot image out(busy box should be installed on your device)
Code:
dd if=/dev/block/mmcblk0p34 of=/sdcard/recovery.img
techmate98 said:
brother you will hav to first root the set up an sdk on your computer then using adb commands you can get the stock boot image out(busy box should be installed on your device)
Code:
dd if=/dev/block/mmcblk0p34 of=/sdcard/recovery.img
Click to expand...
Click to collapse
now i see 1 problem, how can we extract the stock recovery in kitkat, coz we need to flash the CWM or TWRP recovery first before we can root the device. i don't see any other method how to root our device without flashing first a custom recovery.
microchip88 said:
now i see 1 problem, how can we extract the stock recovery in kitkat, coz we need to flash the CWM or TWRP recovery first before we can root the device. i don't see any other method how to root our device without flashing first a custom recovery.
Click to expand...
Click to collapse
by flashing a prerooted ROM through odin or using CF-AUTOROOT..
I like the TWRP.. i dont have seen other problem Except that I BACK UP my ROM using S5 PORT ROM. After backing up., i installed the CM11 latest version, after an hour i RESTORE the S5 port rom that i had BACK-UP. But i cannot RESTORE it because it does not appear. What i need is COPY the BACK-UP from EXT-SD CARD to SD-CARD then RESTORE it. Is that the bug or that's the way of restoring it?
REQUEST..
sir Ali.Filth and Techmate98 can we request a FLASHABLE TWRP directly via CWM.. thank you sir. MORE POWER..
Android-secure partition
Is android-secure partition not available in our device or that TWRP 2.7 doesn't have that option? Because many apps in SdCard and when is not option to backup android-secure when restore the backup I don't have apps that in sdcard anymore. need to install that apps again. :crying:
thus this recovery work for K1 stock firmware.
hello,
will this work with G7105/LTE device ?
it does not say in thread for which device its for.
thanks
cookiepuppy said:
hello,
will this work with G7105/LTE device ?
it does not say in thread for which device its for.
thanks
Click to expand...
Click to collapse
can anyone help or answer pls, is this forum dead ? no matter which forum im asking question , it seems no one wants to answer . is this device dead ?
Hi All
I've got a Oneplus X, rooted, unlocked, running TWRP but i accidently wiped System when doing a ROM Flash.
The problem i have now is when i try and flash either 2.1.2 or 2.1.3 i get a flash error saying device unrecognized. ROM for oneplus x device is "."
How the hell do i get round this ? i can't install any ROM's at the moment so i'm left with a phone i can get in to TWRP or Bootloader but can't do anything else with !!
HELP
To flash oxygen agin you have to have stock recovery try flashing stock recovery then flash rom
Sent from my ONE E1003 using Tapatalk
Do you really need stock recovery to flash the Oxygen ROM ??? Where can i grab the latest Stock Recovery and how do i install it, is it flashable ?
If i can use TWRP where can i get the latest supported version of that ?
thesponz said:
Do you really need stock recovery to flash the Oxygen ROM ??? Where can i grab the latest Stock Recovery and how do i install it, is it flashable ?
If i can use TWRP where can i get the latest supported version of that ?
Click to expand...
Click to collapse
Twrp link:-http://forum.xda-developers.com/devdb/project/dl/?id=15364
Rom:- http://ns336247.ip-91-121-110.eu/h2o64/ONEPLUS_OTA/
First download full system dump then otas
And if you cant enable mtp then copy the files to sd card(if you dont have borrow it from somewhere) then flash it
The problem I have now is the phone isn't recognised in fastboot.
If I do adb devices in TWRP is returns the phone ID with phone is not Authorized. Won't allow me to adb sideload either....
any ideas how to force the phone to be authorized ?
ROM link says 404: Website not found
mohammedtabish said:
Twrp link:-http://forum.xda-developers.com/devdb/project/dl/?id=15364
Rom:- http://ns336247.ip-91-121-110.eu/h2o64/ONEPLUS_OTA/
First download full system dump then otas
And if you cant enable mtp then copy the files to sd card(if you dont have borrow it from somewhere) then flash it
Click to expand...
Click to collapse
ROM: Link doesnt work, says ERROR 404: Website not available
tigerkir said:
ROM: Link doesnt work, says ERROR 404: Website not available
Click to expand...
Click to collapse
you can flash it with stock recovery
https://drive.google.com/file/d/0B3AIip-hiOnNb1pBeGNlcUIyYmc/view?pref=2&pli=1
its 2.1.2 full system dump then download the otas through system updates in settings
Here is the last 2.1.3-X full zip
https://www.androidfilehost.com/?fid=24269982087013219
Just flash it via recovery
Sent from my ONE E1003 using Tapatalk
If nothing else works and worse comes to worse. This guide will show you how to make everything stock again. Just e forewarned your data will be erased. so backup in TWRP and then backup that backup on your PC.
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
Hi
I don't know where to publish this thread cause there is no Zenfone 3 Zoom Section
So I will write it here till the moderators make the section
This thread is method for changing the stock ROM from Chinese version to worldwide version
NOTE : You can't flash ww ROM from TWRP even if you change the Updater script , also it can't be flashed from ASUS flashtool. [ I attached photos for it ]
Required things :
1- Unlocked Bootloader | you can Download the unlock app from herehttps://ln.sync.com/dl/be16e9f30/h5hsy3iq-ruag2n8n-v293cg8a-wi29bypk
2- adb & fastboot drivers | download it from here
3- WW ROM | from here
** You have to make a backup for your data cause your device will be wiped .
Steps :
1- Unlock the bootloader .
2- Install the adb & fastboot drivers on your PC
3- extract the ROM file [ will have a lot of files , you only need System.img and boot.img]
4- copy System.img and boot.img to adb&fastboot folder
5- open command Prompt
6- put your devices in fastboot mode [ restart your device then press the Vol.Up button and choose fastboot]
7- enter these commands in cmd :
fastboot flash boot boot.img
fastboot flash system system.img
fastboot format userdata
fastboot reboot
8- enjoy your new ww rom
** if you want to flash twrp then >>
1- install it from here
2- enter fastboot mode
3- in cmd , write this command
fastboot flash recovery twrp.img
DONE
photos attached for
battery Status after installing WW ROM
difference between the WB in WW ROM and CN ROM
The errors shown when flashing WW ROM from TWRP or asus flashtool
Nice guide
awesome
I know this isn't the thread for it... but there is no forum for the ZenFone 3 Zoom.
I have US model and I've unlocked the bootloader, installed TWRP, rooted.
I want to install rom update that was just released last week. It obviously doesn't flash in TWRP. I also can't unzip it without corruption errors. Redownloaded the ROM multiple times from ASUS.
I assume to update stock rom with an unlocked Bootloader we'll need stock recovery??
DriveEuro said:
I have US model and I've unlocked the bootloader, installed TWRP, rooted.
I want to install rom update that was just released last week.
Click to expand...
Click to collapse
How did you do the rooting? No issues so far? Is there a guide somewhere you followed?
calus said:
How did you do the rooting? No issues so far? Is there a guide somewhere you followed?
Click to expand...
Click to collapse
Use the bootloader unlock.
Install TWRP.
Install SuperSU zip file.
DriveEuro said:
Use the bootloader unlock.
Install TWRP.
Install SuperSU zip file.
Click to expand...
Click to collapse
And where was that twrp install originally from? I haven't found an image for this model specifically.
Also, does this bootloader unlock still allow the pushed OS updates from ASUS? Want to make sure I can get Nougat when it comes out!
Hey guys,
I need some help. I installed the apk to unlock the bootloader and my phone was fine, but after flashing twrp and installing the zip for supersu via twrp, my phone has been stuck on the boot screen. Now it says "The dm verity is not started in enforcing mode and may not work properly" when booting up. I can get back into twrp, and I've tried wiping the dalvik/art cache, system, data, and cache, but my phone still won't boot up. It's stuck on the ASUS boot screen, and I have no idea what to do now. Any help would be greatly appreciated!
magicmanfk said:
And where was that twrp install originally from? I haven't found an image for this model specifically.
Click to expand...
Click to collapse
https://www.asus.com/zentalk/tw/thread-222337-1-1.html
Use google translate.
---------- Post added at 05:34 AM ---------- Previous post was at 05:33 AM ----------
magicmanfk said:
Also, does this bootloader unlock still allow the pushed OS updates from ASUS? Want to make sure I can get Nougat when it comes out!
Click to expand...
Click to collapse
No. The last update WW_V11.41.87.2 is not available for my OTA. I can download the zip though and flash. I haven't actually attempted to do this yet. I plan to flash it today. Not sure if I'll be able to do it through twrp, or if I'll have to flash back the stock recovery first.
So does this change the bands available with it? I have the WW ROM but want the additional bands the US ROM has.
why I only have system.new.dat where can i get the system.img? thank you
How did you get on with flashing the update... did you have to revert to stock recovery and if so which did you use? Thanks for your help with this.
Can I ask where/how you got the stock ROM? I'd like to make sure that these are updated/available somewhere for people on this device to use as needed, and ASUS seems to only have the updates on their website.
Is it possible to relock bootloader after converting to WW?
I'm interested in this phone. Do you know if this one is going to be shipped later this year with Snapdragon 630?. I hear something similar in a YouTube video.
JERRYZKT said:
Is it possible to relock bootloader after converting to WW?
Click to expand...
Click to collapse
Once the bootloader is unlocked it can't be relocked.
I cant find the images in the folder - are they named differently?
Already I convert CN to WW successfully. Thanks for your post . But , I want to update Nougat WW rom. Please help me boss..... I am student and ZenFone 3 Zoom is my favorite phone. Please do something for me .......
???
How can I update Nougat on ZenFone 3 Zoom.....??? Please help me .......
Hi all and sorry for my bad english in first!!
i live in italy and i've buyed(but still not recieved) one oneplus 9r from china whit oxygenos rom on board..
When it comes i want to root & debloat it, but i've some queustion cause in last year i've used only device with custom rom!.
first of all i wan't to root the phone, but preserve the possibility to update the OS with ota. if i understand right it's possible with magisk, can please someone tell me the correct step to make?
after root i vant to uninstall not necessary app for my utilization (facebook/instagram/netflix, red cable and oneplus account, google app, gdrive, google photo and most of BigG apps cause i'm using only gmail/yt/maps/ an store!).
the question is.... if i uninstall this app it will be re installed in future ota?
Thanks in advice!
Step1 : unlock bootloader, this will wipe the storage, then setup the device once again then enable usb debugging in developer options.
You can use this
Tool to make (tool all in one) your life easier : https://sourceforge.net/projects/tool-all-in-one/files/TOOL_ALL_IN_ONE_1.0.6.1.zip/download
you should select 8t as 9r is not supported officially
at the moment.
Step2: update the phone to latest version , right now it's 11.2.5.5
Step 3: download the same version of the oxygen is ota wether from xda, OnePlus official site , oxygen updater ( make sure it is full version).
Step4: on pc now extract only the payload.bin file in the input of the payload extracter ,
Now use the payload extracter ,
Run .exe and get boot.img .
payload_dumper_tool_by_ius.zip
drive.google.com
(MAKE SURE THE PHONE OS VERSION AND BOOT IMG VERSION IS SAME)
Step 5: install magisk manager on phone, now patch the boot.img that you extracted earlier. Copy this patched boot.img in platforms tool folder(I hope that u have installed the platform tools and adb & fastboot ).
Step 6: open terminal there in platform tools , use the tool all in one to boot your phone in fast boot mode,then flash patched boot.img using.
Fastboot devices
Fastboot flash boot_a patched.img
Fastboot flash boot_b patched.img
Bingo got rooted.
Step 7( optional) : now properly restart the phone by opening magisk , then install universal safety net fix, debloat modules in magisk.
You can use lucky patcher to debloat unnecessary things (which don't exist as it is oxygen os)
Now in future if your phone gets ota make sure you disable all magisk modules then download the full version of ota from oxygen updater & update it locally & do not restart.
go to magisk ,
flash magisk to inactive slot.
restart now,
REnable the modules. (Tip don't enable the lucky patcher module this will put you in bootloop)
enjoy the ota .
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
lvints said:
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
Click to expand...
Click to collapse
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
Way better than twrp just follow the steps u won't lose anything
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
So how did it go?
Rajveer chauhan said:
So how did it go?
Click to expand...
Click to collapse
I've already downloaded the files, but I haven't tested them yet.
I'll leave it for the weekend, if there's a problem I can solve it with peace of mind.
Sir have you tried changing the font of your 9R?
I've been looking on the magisk forums or some app but I haven't had success.
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Rajveer chauhan said:
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Click to expand...
Click to collapse
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Same version
lvints said:
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Click to expand...
Click to collapse
.
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
I flashed the img file and it booted to OrangeFox but I cannot press anything as the screen does not react. What is the solution for it?
It's is compatible with oos 11
Not with oos 12, any custom roms
Rajveer chauhan said:
It's is compatible with oos 11
Not with oos 12, any custom roms
Click to expand...
Click to collapse
I was on OOS 11. The 11.2.8.8.LE28DA.
Flashed it, boot up but cannot press anything. How can I go back to the original boot?
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Rajveer chauhan said:
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Click to expand...
Click to collapse
Thanks I got back to the original boot, but now how can I root with Magisk?
@Rajveer chauhan
Hello sr
Have you updated your 9r for A12 ? If yes, how did you do it? Would it be possible to go from A11 (11.2.8.8) to A12 (C.33)?
Hi guys so Many users are facing issue while they are rooted and twrp installed on there phone.
They can't able to Flash update through stock settings OR via twrp if they tries to flash it via twrp manually facing no wifi and Bluetooth.
So here is the process to flash any incremental update via twrp just we need update zip, vbmeta image and boot image of old oos version respective to your new update means if. We are upgrading to V11 we need V10 boot img
U can use following commands to extract your current stock boot img after connecting to PC
adb shell
dd if=/dev/block/sdc49 of=/sdcard/boot.img
exit
Note: Remember this process will replace your twrp and removes root to gain root access. We need to repeat twrp installation shown in the following tutorial
TUTORIAL TWRP AND ROOT NORD 2 OXYGEN OS 11 ( Links updated!)
SO finally I successfully rooted with TWRP and root access.thanks to all developers @Eastw1ng @TheMalachite Following are all download links combined in one post Also there are two threads like unlocking boot loader and twrp but there are some...
forum.xda-developers.com
You can gain root acess only by flashing magisk.zip file after step no 7 given under instructions but I didn't tested it yet.
DOWNLOADS:
1)Download update v11 from Telegram :
®D$ in OnePlus Nord 2 Community
t.me
2) DOWNLOAD V13:
®D$ in OnePlus Nord 2 Community
t.me
3) Download V14 update zip:
️ in OnePlus Nord 2 Community
t.me
4) Download A15 update zip:
e9708c8610bae8fa64d76e0f9a55dda444ce981a.zip
drive.google.com
We can also download update in system update process. Just download OTA update and when we boot in twrp just click install and then go to following folder there you will find update.zip
/data/OTA-package/update.zip
5)A17 update zip:
https://t.me/OnePlusNord2GlobalOfficial/81364
Download vbmeta:
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download boot.img:
1) upgrade from v10 to v11(indian)
boot.img
drive.google.com
2) upgrade from v11 to v13(indian)
bootnew.img
drive.google.com
3)Upgrade from v13 to v14:
Rose in OnePlus Nord 2 Community
t.me
4)Upgrade from A14 to A15:
Rose in OnePlus Nord 2 Community
t.me
5)15 Boot img india (update from A15 to AA16)
https://t.me/OnePlusNord2GlobalOfficial/57795
5)A16 boot.img to upgrade to A17:
Rose in OnePlus Nord 2 Community
A16 stock boot image
t.me
6)17 BOOT IMG Upgrade to A18 (boot.img vbmeta zip extract file)
Rose in OnePlus Nord 2 Community
t.me
Boot img for nord 2 EU REGION :
File folder on MEGA
mega.nz
This another thread for all boot img of EU region
Stock Boot & Patched images Oneplus Nord 2 Oxygen 11.3 DN2103_11_A.07/09/10 EEA
Flash at your own risk. I am not responsible for any damage or data loss to the device during this process! https://mega.nz/folder/fZx2nBaR#Q33lJstFRMQg6_0j7Z0TJw Special Thanks: @HofaTheRipper @phhusson
forum.xda-developers.com
Instructions :
1) Download all file from the link given under this thread place them at one place on your phone so it can be easily accessible when we boot in TWRP.
2)Now to boot in TWRP use following root acess app called as advance reboot. Open it and click reboot to recovery
Advanced Reboot Tools [ROOT] - Apps on Google Play
Provides lots of options for restarting your device; excellent for tweakers.
play.google.com
Or you can use adb command after connecting phone to pc in USB debugging mode.
adb reboot recovery
3) when phone boot in TWRP click install tab now go to folder where we placed All files.
4) click install image tab at bottom now you we see image files boot. img and vbmeta.img that we downloaded
5)now select boot.img and then select boot partation and slide bottom bar after successful installation
6)click reboot and select recovery phone will boots back to twrp( This step is optional)
7)Now again click Install and find our old folder now select update.zip file and slide bottom bar it will take 2min for complete falshing of zip.
8)now agian click install now click install image and select vbmeta.img
9)Now click reboot system phone will reboots and take 10min.
Now you are successfully updated and have new OOS 11.3 A11 version on your phone without any issues.
Follow the video:
New update v13 update process :
New update A14 update process:
New update A15:
New update A16:
New A18 update:
pankspoo said:
Hi guys so Many users are facing issue while they are rooted and twrp installed on there phone.
They can't able to Flash update via twrp if they tries to flash it via twrp manually facing no wifi and Bluetooth.
So here is the process to flash any incremental update via twrp just we need update zip, vbmeta image and boot image of old oos version respective to your new update means if. We are upgrading to V11 we need V10 boot img.
Follow the video:
Click to expand...
Click to collapse
good Instructions! Reboot after flashing boot.img isnt necessary. OTA Update zip can be downloaded within OTA App in Settings (do not press reboot). After downloading you can reboot to TWRP and the file location is: /data/OTA-package/update.zip.
HofaTheRipper said:
good Instructions! Reboot after flashing boot.img isnt necessary. OTA Update zip can be downloaded within OTA App in Settings (do not press reboot). After downloading you can reboot to TWRP and the file location is: /data/OTA-package/update.zip.
Click to expand...
Click to collapse
Yes but I don't want to go to automatic reboot and flashing process of OTA Update installation after download which may cause some issues for new users.
The old boot.img I image is the stock one not rooted right? How can you extract it from your firmware if you're not rooted? From the Nandroid backup maybe?
Edit, found out: https://forum.xda-developers.com/t/how-to-extract-your-boot-img-from-any-rom-adb.3760210/ Just had to google it
Don't wo
Raygen said:
The old boot.img I image is the stock one not rooted right? How can you extract it from your firmware if you're not rooted? From the Nandroid backup maybe?
Click to expand...
Click to collapse
Donts worry from here every new updates we will provide all stock boot. img
Thread updated for latest update v13 for India region
HI. This is my 1st OnePlus and OxygenOS. I am now on DN2103_11_A.11 and OTA is available. It is DN2103_11_A.12
Basically I can flash it from TWRP and I do not need to save and flash boot.img afterwards bec OS will be the same version. Is that so? Or am I wrong? And I have to follow threads instructions ?
Thank you
jis251 said:
HI. This is my 1st OnePlus and OxygenOS. I am now on DN2103_11_A.11 and OTA is available. It is DN2103_11_A.12
Basically I can flash it from TWRP and I do not need to save and flash boot.img afterwards bec OS will be the same version. Is that so? Or am I wrong? And I have to follow threads instructions ?
Thank you
Click to expand...
Click to collapse
NO u need A11 boot img of only DN 2103 firmware not indian I don't have that now first flash that then flash update zip of v12 then flash Vbmeta now that's done
pankspoo said:
NO u need A11 boot img of only DN 2103 firmware not indian I don't have that now first flash that then flash update zip of v12 then flash Vbmeta now that's done
Click to expand...
Click to collapse
HI. And thx for quick reply. I mange now, thank you.
DN2103 A.11 stock boot img :
HofaTheRipper said:
DN2103 A.11 stock boot img :
Click to expand...
Click to collapse
You got it do it now
HofaTheRipper said:
DN2103 A.11 stock boot img :
Click to expand...
Click to collapse
HI and thx. I have made TWRP backup, boot and vbmeta
So I can first restore boot then flash OTA and then restore vbmeta, yes? (Version 11)
I do not have to flash boot and vbmeta, restore does the same??
jis251 said:
HI and thx. I have made TWRP backup, boot and vbmeta
So I can first restore boot then flash OTA and then restore vbmeta, yes? (Version 11)
I do not have to flash boot and vbmeta, restore does the same??
Click to expand...
Click to collapse
Don't use backup boot image restore process.
Just download above boot image given
https://forum.xda-developers.com/attachments/boot_stock_a11-img.5461307/
and vbmeta image given in. My thread
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
And u r update zip of device of your region not mine
First flash boot img then. Install update zip then. Flash Vbmeta done
pankspoo said:
Don't use backup boot image restore process.
Just download above boot image given
https://forum.xda-developers.com/attachments/boot_stock_a11-img.5461307/
and vbmeta image given in. My thread
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
And u r update zip of device of your region not mine
First flash boot img then. Install update zip then. Flash Vbmeta done
Click to expand...
Click to collapse
Thx. OK I do that.
Magisk is installed (patched) to boot image so after OTA and Vbmeta I flash Magisk to keep root.
jis251 said:
Thx. OK I do that.
Magisk is installed (patched) to boot image so after OTA and Vbmeta I flash Magisk to keep root.
Click to expand...
Click to collapse
Yes
pankspoo said:
Download boot.img:
1) upgrade from v10 to v11(indian)
boot.img
drive.google.com
2) upgrade from v11 to v13(indian)
bootnew.img
drive.google.com
Click to expand...
Click to collapse
Do the boot.img files in the original post only work on the Indian variant? Where can I get the A11 boot.img for the European variant if I want to update to A12?
NetSoerfer said:
Do the boot.img files in the original post only work on the Indian variant? Where can I get the A11 boot.img for the European variant if I want to update to A12?
Click to expand...
Click to collapse
Ok I will upload in thread
NetSoerfer said:
Do the boot.img files in the original post only work on the Indian variant? Where can I get the A11 boot.img for the European variant if I want to update to A12?
Click to expand...
Click to collapse
File folder on MEGA
mega.nz
Use boot images from stock folder
pankspoo said:
U can use following commands to extract your current stock boot img after connecting to PC
adb shell
dd if=/dev/block/sdc49 of=/sdcard/boot.img
exit
Click to expand...
Click to collapse
Still trying to wrap my head around this (although updating worked fine from A11 to A12 on my EEA variant, thanks @pankspoo!).
Can I actually extract a stock boot.img from a Magisk-rooted phone? Is it stock (in which case why is root removed by the update.zip) or is it modified (in which case, why can I extract it as stock)?
NetSoerfer said:
Still trying to wrap my head around this (although updating worked fine from A11 to A12 on my EEA variant, thanks @pankspoo!).
Can I actually extract a stock boot.img from a Magisk-rooted phone? Is it stock (in which case why is root removed by the update.zip) or is it modified (in which case, why can I extract it as stock)?
Click to expand...
Click to collapse
You can use those adb commands while booted in TWRP, without being rooted. So you'll extract the stock boot image