Related
Hi, first of all, my English is bad and i'm a noob at installing custom roms
My HOX+ is rooted and i have the TWRP Recovery installed.
So, i downloaded the newest CM11 Nightly for my device (enrc2b) from the Cyanogenmod site.
When i try to flash it with TWRP it says:
Skipping MD5 check: no MD5 file found
Can't install this package on top of incompatible data. Please try another package or run a factory reset
E:Error executing updater binary in zip ' /sdcard/cm-11-20140902-NIGHTLY-enrc2b.zip
Error flashing zip ' /sdcard/cm-11-20140902-NIGHTLY-enrc2b.zip
I also downloaded a Snapshot version of CM11
It says:
Skipping MD5 check: no MD5 file found
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip ' /sdcard/cm-11-20140308-SNAPSHOT-M4-enrc2b.zip
Error flashing zip ' /sdcard/cm-11-20140308-SNAPSHOT-M4-enrc2b.zip
So finally i downloaded the CM10.2.1 Version
I wiped all cache and data and did a factory reset.
After flashing the .zip and rebooting the phone, but i got stuck in a boot loop (i think) because i waited like 20 minutes but the boot animation didn't change (blue guy with the arrow). Did i do something wrong
I just restored my phone to the backup i made (stock rom)
If you need any information about my phone or something just say it.
I also heard about using CWM instead of TWRP but i don't know how to change it.
PLZ HELP :crying:
CWM recovery
Install this recovery for installing CM.
And don't forget to redo your backup after installing the new recovery before installing CM.
[email protected] said:
Install this recovery for installing CM.
And don't forget to redo your backup after installing the new recovery before installing CM.
Click to expand...
Click to collapse
Thx, I will try it
Sent from my HTC One X+ using XDA Free mobile app
I'm working with a Mac so it might take a while before i understand everything but i'll let you know if it worked.
So yesterday i installed the CWM and flashed Cyanogenmod11 Nightlies at 00:10. I got the boot screen with the guy and the arrow spinning, but when i wake up at 7:00 it was still in the Cyanogenmod boot screen wit the arrow (the arrow was lagging).
So i tried flashing the Snapshot version and it also didnt pass the screen with the arrow (lagging)
After that i flashed the CM10.2 and the arrow wasnt lagging anymore but it didnt pass the screen with the arrow
Every time before i installed another version i did a Factory reset in CWM
So am i doing something wrong plz help?
Sent from my HTC One X+ using XDA Free mobile app
Anthony26 said:
So yesterday i installed the CWM and flashed Cyanogenmod11 Nightlies at 00:10. I got the boot screen with the guy and the arrow spinning, but when i wake up at 7:00 it was still in the Cyanogenmod boot screen wit the arrow (the arrow was lagging).
So i tried flashing the Snapshot version and it also didnt pass the screen with the arrow (lagging)
After that i flashed the CM10.2 and the arrow wasnt lagging anymore but it didnt pass the screen with the arrow
Every time before i installed another version i did a Factory reset in CWM
So am i doing something wrong plz help?
Sent from my HTC One X+ using XDA Free mobile app
Click to expand...
Click to collapse
did you flash the boot.img in fastboot before installing the rom?
reaper90 said:
did you flash the boot.img in fastboot before installing the rom?
Click to expand...
Click to collapse
Do you mean with "boot.img" the recovery-clockwork-touch-6.0.4.8-enrc2b.img
This is all i did (i dunno of the screenshot will display i uploaded it as attachment)
I've flashed the recovery.img, thats also the only thing i downloaded on the CWM site.
I also downloaded the Cyanogenmod rom on the CyanogenMod Download site or do i have to download it from the CWM enrc2b Roms?
Edit: I've found out that the boot.img is needed for the device to boot and that i can flash it in recovery.
But is there a special HOX+ boot.img or a Cyanogenmod boot.img or whatever i need? And where can i find it
Anthony26 said:
Do you mean with "boot.img" the recovery-clockwork-touch-6.0.4.8-enrc2b.img
This is all i did (i dunno of the screenshot will display i uploaded it as attachment)
I've flashed the recovery.img, thats also the only thing i downloaded on the CWM site.
I also downloaded the Cyanogenmod rom on the CyanogenMod Download site or do i have to download it from the CWM enrc2b Roms?
Edit: I've found out that the boot.img is needed for the device to boot and that i can flash it in recovery.
But is there a special HOX+ boot.img or a Cyanogenmod boot.img or whatever i need? And where can i find it
Click to expand...
Click to collapse
you can find it inside the rom zip file, just extract it into your adb/fastboot folder and flash it (in fastboot mode) using "fastboot flash boot boot.img". also i recommend (maybe not necessary) using "fastboot erase cache" before and after flashing boot.img.
Also you may need to reflash rom in recovery after flashing boot.img.
reaper90 said:
you can find it inside the rom zip file, just extract it into your adb/fastboot folder and flash it (in fastboot mode) using "fastboot flash boot boot.img". also i recommend (maybe not necessary) using "fastboot erase cache" before and after flashing boot.img.
Also you may need to reflash rom in recovery after flashing boot.img.
Click to expand...
Click to collapse
Thx,
I forgot to unzip the file :silly:
I'll try it and let you know of it worked
reaper90 said:
you can find it inside the rom zip file, just extract it into your adb/fastboot folder and flash it (in fastboot mode) using "fastboot flash boot boot.img". also i recommend (maybe not necessary) using "fastboot erase cache" before and after flashing boot.img.
Also you may need to reflash rom in recovery after flashing boot.img.
Click to expand...
Click to collapse
Alright i did what u said and i have 1 more question;
If i want to go back to the stock rom, do i need to flash a "stock" boot.img?
Edit: Cyanogenmod is working, i only need to install the Google apps (i think).
Stock boot image
You can flash the Nik3r version to come back to the stock boot image.
And you need to flash the GAPPS in recovery for the Google apps
Anthony26 said:
Alright i did what u said and i have 1 more question;
If i want to go back to the stock rom, do i need to flash a "stock" boot.img?
Edit: Cyanogenmod is working, i only need to install the Google apps (i think).
Click to expand...
Click to collapse
If you want to go back to stock completely (including relocked bootloader) you will need everything completely stock and matching your phones CID. Of course you will need to flash the corresponding boot.img for every rom. But as far as i know/tried, nik3rs oxp_kk kernel works for all 4.4 roms and the other version works for all Sense5 based custom roms and maybe stock rom (if you don't need relocked bootloader).
[email protected] said:
You can flash the Nik3r version to come back to the stock boot image.
And you need to flash the GAPPS in recovery for the Google apps
Click to expand...
Click to collapse
reaper90 said:
If you want to go back to stock completely (including relocked bootloader) you will need everything completely stock and matching your phones CID. Of course you will need to flash the corresponding boot.img for every rom. But as far as i know/tried, nik3rs oxp_kk kernel works for all 4.4 roms and the other version works for all Sense5 based custom roms and maybe stock rom (if you don't need relocked bootloader).
Click to expand...
Click to collapse
Thx, i have installed the Gapps and it's working good.
The only thing i notice is the fast battery drain, is it possible to underclock some thing so the battery last longer, and which apps are good for that?
And if i want to go back to the stock rom, i just have to go back to my "stock rom backup" in recovery and flash nik3rs oxp_kk kernel?
Anthony26 said:
Thx, i have installed the Gapps and it's working good.
The only thing i notice is the fast battery drain, is it possible to underclock some thing so the battery last longer, and which apps are good for that?
And if i want to go back to the stock rom, i just have to go back to my "stock rom backup" in recovery and flash nik3rs oxp_kk kernel?
Click to expand...
Click to collapse
no, oxp_kk is just for 4.4 (kitkat) AOSP like roms. there's another non- kk version which works with 4.2.2/sense5 roms, but i don't know about stock roms. There's also a fallback kernel version which should work with all stock and custom 4.2.2/Sense 5 roms.
I was flashing paranoid android 6.0.2 for my device. I downloaded the zip(from the official paranoid android website) and checked the md5 checksum, which did not match. However, like a total idiot, I flashed it nonetheless. On booting, the phone gets stuck on the boot logo. I tried booting into recovery(TWRP) and performing a factory reset to no avail. I redownloaded the flashable zip for Paranoid, successfully verified the md5 checksum and flashed it again, no avail. Restore a full backup from within TWRP, no avail. My phone still gets stuck on the bootlogo. I have looked all over every forum without any results. Please help me out? I would like to get it back to functional state and flash the rom again. As mentioned, I have access to my custom recovery and can connect to my device via fastboot. I am willing to give any other information you may need.
Thanks!
Shreyas
shreyasminocha said:
I was flashing paranoid android 6.0.2 for my device. I downloaded the zip(from the official paranoid android website) and checked the md5 checksum, which did not match. However, like a total idiot, I flashed it nonetheless. On booting, the phone gets stuck on the boot logo. I tried booting into recovery(TWRP) and performing a factory reset to no avail. I redownloaded the flashable zip for Paranoid, successfully verified the md5 checksum and flashed it again, no avail. Restore a full backup from within TWRP, no avail. My phone still gets stuck on the bootlogo. I have looked all over every forum without any results. Please help me out? I would like to get it back to functional state and flash the rom again. As mentioned, I have access to my custom recovery and can connect to my device via fastboot. I am willing to give any other information you may need.
Thanks!
Shreyas
Click to expand...
Click to collapse
What was your last rom? Did u upgrade ur bootloader?
You probably looking at mega unbrick guide
cva_kabil said:
What was your last rom? Did u upgrade ur bootloader?
Click to expand...
Click to collapse
I was running stock OxygenOS(>3.0.0) ROM.
shreyasminocha said:
I was running stock OxygenOS(>3.0.0) ROM.
Click to expand...
Click to collapse
Yeah thats d problem, PA roms are only compatible with old lollipop bootloader, u said u were in oos3 which means u hv updated to ur bootloader to marshmallow. Try clean flashing new bootloader supported roms. Before downloading check for its compatibility, all nougat roms r compatible.. U can try if u wish ))
cva_kabil said:
Yeah thats d problem, PA roms are only compatible with old lollipop bootloader, u said u were in oos3 which means u hv updated to ur bootloader to marshmallow. Try clean flashing new bootloader supported roms. Before downloading check for its compatibility, all nougat roms r compatible.. U can try if u wish ))
Click to expand...
Click to collapse
That said, should I follow a bricked guide before doing the above?
cva_kabil said:
Yeah thats d problem, PA roms are only compatible with old lollipop bootloader, u said u were in oos3 which means u hv updated to ur bootloader to marshmallow. Try clean flashing new bootloader supported roms. Before downloading check for its compatibility, all nougat roms r compatible.. U can try if u wish ))
Click to expand...
Click to collapse
Also, is there any way I can downgrade my bootloader?
shreyasminocha said:
Also, is there any way I can downgrade my bootloader?
Click to expand...
Click to collapse
Flash any 2.X.X ROM. One way is to fastboot flash old stock recovery and flash safest way I think. The other is to flash with twrp make sure after flashing the ROM to flash old twrp IMG after. Make sure you boot right back into twrp.
shreyasminocha said:
Also, is there any way I can downgrade my bootloader?
Click to expand...
Click to collapse
Assuming you're on OOS3 with TWRP for new bootloader,
- Boot into recovery
- Wipe everything except SD Card
- Flash OOS2 zip
- Boot into it
- Goto settings, unlock dev options, enable advanced reboot
- Then reboot to bootloader
- Flash twrp for old bootloader via fastboot, use this one https://dl.twrp.me/onyx/twrp-3.0.2-0-onyx.img
Done
-Now u hv sucessfully downgraded ur bootloader,flash PA or any supported roms
Used mega unbrick tool because I was unable to unlock bootloader and now I'm stuck at 1+ logo (powered by android disappears quickly), did you solve it?
edit: nevermind, adb sideload with stock OOS fixed it.
TravaPL said:
Used mega unbrick tool because I was unable to unlock bootloader and now I'm stuck at 1+ logo (powered by android disappears quickly), did you solve it?
edit: nevermind, adb sideload with stock OOS fixed it.
Click to expand...
Click to collapse
Tried mega unbrick. (bootloop)
Tried OOS3.1.4.zip via stock recovery and success message apears after installation but still bootloop (previusly it was on CM13)
Tried ADB sideload (but not booting)
i have access to ADB and Fastboot.
please help :crying:
iamsandiprathva said:
Tried mega unbrick. (bootloop)
Tried OOS3.1.4.zip via stock recovery and success message apears after installation but still bootloop (previusly it was on CM13)
Tried ADB sideload (but not booting)
i have access to ADB and Fastboot.
please help :crying:
Click to expand...
Click to collapse
Did you managed to sort it out? How?
Mega unbricked guide?
Here is the last version at the moment of the Maze alpha ROM (tested only in 4GB version)
It's a complete ROM, not an OTA update, it can be flashed using the provided TWRP 3.2.1 version, I ported from a Jemmini (many thanks) version for Bluboo S1.
Unfortunately, the TWRP cannot be flashed (issue with the touch panel), only launched by fastboot.
The ROM is the same as the v8 official one except that it is rooted using Magisk 15.2 and busybox 1.27.2 (thanks to osm0sis) is installed in /system/xbin
There is also a SPFlashTool clean version of this ROM, useful in case of troubles (as official: no root, no busybox)
1- Reboot you phone in fastboot mode : adb reboot bootloader
2- Flash the provided TWRP : fastboot flash recovery recovery_maze_alpha_4G_twrp-321.img
3- Reboot to TWRP recovery
4- copy in your SDCARD and install, in the running TWRP, the downloaded ROM V09 : Maze_Alpha_4GB_v09_TWRP.zip
The first boot take some minutes so be patient.
Here the SPFlashTool versions :
MAZE_Alpha_4GB_V09_SPFT.zip
Here, if needed, my V09 TWRP backup (new one from 21/04/2018) :
TWRP_BACKUP_MAZE_Alpha_A_V09.zip
Credits to Jemmini and Magisk team.
Can you make this for the 6 gb version?
many thanks gonna ty it soon
Nautilus99 said:
Can you make this for the 6 gb version?
Click to expand...
Click to collapse
I do not have the 6GB version
If I can download a stock ROM and a recent OTA update, I will do that.
Maze do not help us unfortunately
No complete stock ROM, No kernel source nothing !!!!!!!!!!
dreambo said:
I do note have the 6GB version
If I can download a stock ROM and a recent OTA update, I will do that.
Maze do not help us unfortunately
No complete stock ROM, No kernel source nothing !!!!!!!!!!
Click to expand...
Click to collapse
Yes i know its sad, i did a backup of mine and root it but it didnt work the backup i had to do clean flash, if we can manage to have a twrp and a source of the stock roms we could make a deabloat and put update apps ( menssages, calendar etc) and put mods for awsome features i dont see RR or lineage putting thier hands on this phone
Thanks for this Rom.
Is there any root for the maze alpha x?
here
WiddleyScudds said:
Is there any root for the maze alpha x?
Click to expand...
Click to collapse
read
The ROM is the same as the v8 official one except that it is rooted using Magisk 15.2 and busybox 1.27.2 (thanks to osm0sis) is installed in /system/xbin
Click to expand...
Click to collapse
thorfr said:
read
Click to expand...
Click to collapse
I have an alpha x, not alpha.
Thanks for ROM
When I install this ROM, from TWRP, i need install anything for root (Supersu)? Or when I install this ROM, I have root?
rzoli71 said:
Thanks for ROM
When I install this ROM, from TWRP, i need install anything for root (Supersu)? Or when I install this ROM, I have root?
Click to expand...
Click to collapse
No it is already rooted.
Reboot your phone to android, and then install MagsikManager.apk
I am editing my post to give you a 100% working TWRP 3.2.1 for our beloved Maze Alpha 4G :victory:
thank you
After I installed this rom, and freezed the hot knot, baidu_location FM Radio, etc, the BT connection did not break.
dreambo said:
No it is already rooted.
Reboot your phone to android, and then install MagsikManager.apk
I am editing my post to give you a 100% working TWRP 3.2.1 for our beloved Maze Alpha 4G :victory:
Click to expand...
Click to collapse
Hi dreambo,
do You know if there's a stock rom for download from maze alpha x? I think it's important for normal users and developers to get one. For normal users it's important to have an option to reinstall stock version and for developers I think it's the source for custom roms (e.g. Lineage Os).
If You know a source, can You please give us a link?
ahorntaler said:
Hi dreambo,
do You know if there's a stock rom for download from maze alpha x? I think it's important for normal users and developers to get one. For normal users it's important to have an option to reinstall stock version and for developers I think it's the source for custom roms (e.g. Lineage Os).
If You know a source, can You please give us a link?
Click to expand...
Click to collapse
No I not have any source, I am just a simple user like any other.
If I have any source or if I can make a ROM for MAZE Alpha X, I will do it and I will share it with every body, as I do until now for the MAZE Alpha 4/64
Hi
Sorry for stupid question, but is flashing with SP Flashtool an option to get root without wiping all data (unlike all other methods involving bootloader unlocking)?
iBolitN said:
Hi
Sorry for stupid question, but is flashing with SP Flashtool an option to get root without wiping all data (unlike all other methods involving bootloader unlocking)?
Click to expand...
Click to collapse
Unfortunatly no. As you will see repeated times in the forum, people have issue with phone not booting after changing from stock recovery to twrp. This is do (most likely from) to verified boot setting. And by unlocking bootloader we can bypass verified boot. So without unlock you might get a successfull load into twrp, but android will not boot.
Hello to all and please help if you can.
After unlocking the bootloader and flash the rom I'v got orange state with bootloop. Then after trying to fix it (wrong way) and relock bootloader and got red state with bootloop. I read that flahing back to stock fix the problem but I have no success with the rom provided in this post, the v5 from maze, the latest flash tool and the maze alpha flash tool... in all cases I get DA error(maze flash tool) or DA MISHMATCH (sp flash tool). I also tried different pc and cable with no result and finaly can't get fastboot. If that helps I've got the same flash tool error before the procedure. Every help will be appreciated.
stargazer78 said:
Hello to all and please help if you can.
After unlocking the bootloader and flash the rom I'v got orange state with bootloop. Then after trying to fix it (wrong way) and relock bootloader and got red state with bootloop. I read that flahing back to stock fix the problem but I have no success with the rom provided in this post, the v5 from maze, the latest flash tool and the maze alpha flash tool... in all cases I get DA error(maze flash tool) or DA MISHMATCH (sp flash tool). I also tried different pc and cable with no result and finaly can't get fastboot. If that helps I've got the same flash tool error before the procedure. Every help will be appreciated.
Click to expand...
Click to collapse
First unlock again your bootloader and use fastboot to flash boot, recovery and system partitions:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img.
Those partition images can be found in the ROM for SPFlashTool I have provide.
After that you can boot android normally.
If you any TWRP backup, you can restore it after flashing the TWRP.
Thanks a lot for your reply....
the problem is that i cant boot into fastboot to unlock bootloader....
the phone bootloops all the time, shows the red state alert and even with vol+ pressed the menu to choose recovery or fastboot doesn't apear... thanks again.
dreambo said:
First unlock again your bootloader and use fastboot to flash boot, recovery and system partitions:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img.
Those partition images can be found in the ROM for SPFlashTool I have provide.
After that you can boot android normally.
If you any TWRP backup, you can restore it after flashing the TWRP.
Click to expand...
Click to collapse
Is there any way to unlock the bootloader in my situation or/and enter the fastboot mode in order to follow your steps... thanks.
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Reserved
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
xperia_bird said:
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
Click to expand...
Click to collapse
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
Code:
dd if=/path/to/partition/ of=/sdcard/or/anything
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
nageen9211 said:
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
Click to expand...
Click to collapse
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Bootlooping
xperia_bird said:
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Click to expand...
Click to collapse
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
[email protected] said:
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
Click to expand...
Click to collapse
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
xperia_bird said:
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
Click to expand...
Click to collapse
Your device and model
[email protected] said:
Your device and model
Click to expand...
Click to collapse
Lenovo Z5, L78011.
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Plz make multirom twrp for moto one
anurag_xpert said:
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Click to expand...
Click to collapse
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
nageen9211 said:
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
Click to expand...
Click to collapse
Thanks for the reply. I have downladed april fastboot flashable rom from Mororola updates (link shared at telegram channel) but when i unpacked it, there was no flash script inside, so I could not flash that stock rom and I am still getting this error.
If you or somebody can share that flashall.bat script, i will be thankful.
edit: managed to flash the latest official firmware using youtube tutorial by andro guruji.
All my data was also safe.
Thanks again.
Will I get official updates after flashing this stock rom??
flashall.bat error
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Directory error
lbcsc.clx said:
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Click to expand...
Click to collapse
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
[email protected] said:
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
Click to expand...
Click to collapse
See the cmd in screenshot below
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
Can you please post the link for the july patch or if possible please provide the link for july full stock rom. I am not able to update via OTP. Tried everything.
nageen9211 said:
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Click to expand...
Click to collapse
hi i am bricked my moto
now i back to fast boot mod
how can i flash stock rom by twrp?
help me
i am horrified to brick my device again
Please someone with android 8 or 9 can provide a full system backup for twrp installation?
I installed twrp on my device, then I put the original recovery but now my device does not go into recovery mode, it only enters fastboot mode "CSC" thanks to this I can not format the device and I can not install the system, so if anyone can and has twrp make a backup of the system and make it available to me please, thank you
Edit
Finally I was able to make the device recognize the stock recovery, follow this post
https://forum.xda-developers.com/ze...ide-how-to-install-updates-twrp-root-t3818561
mee tooo
Fluizx said:
Please someone with android 8 or 9 can provide a full system backup for twrp installation?
I installed twrp on my device, then I put the original recovery but now my device does not go into recovery mode, it only enters fastboot mode "CSC" thanks to this I can not format the device and I can not install the system, so if anyone can and has twrp make a backup of the system and make it available to me please, thank you
Click to expand...
Click to collapse
if you had a link of the rom . can you please help me too. Right now my phone is same as yours . Really need your help.
Fluizx said:
Please someone with android 8 or 9 can provide a full system backup for twrp installation?
I installed twrp on my device, then I put the original recovery but now my device does not go into recovery mode, it only enters fastboot mode "CSC" thanks to this I can not format the device and I can not install the system, so if anyone can and has twrp make a backup of the system and make it available to me please, thank you
Click to expand...
Click to collapse
I did not understand. If you can only enter fastboot mode, why do you need a TWRP installable rom? You only need to install raw firmware via ASUS Flash Tool/fastboot.
Follow the tutorial below to install Nougat on your phone, then you can update it normally
https://www.asus.com/zentalk/thread-217685-1-1.html
KaMyKaSii said:
I did not understand. If you can only enter fastboot mode, why do you need a TWRP installable rom? You only need to install raw firmware via ASUS Flash Tool/fastboot.
Follow the tutorial below to install Nougat on your phone, then you can update it normally
https://www.asus.com/zentalk/thread-217685-1-1.html
Click to expand...
Click to collapse
This does not work, simply the original bootloader does not work anymore I put the original boot.img it does not enter recovery.
But I got it using the newer twrp on it I was able to reinstall the rom directly from twrp was the only way I could to reinstall the system.
Download the system from the asus site normally and install the newer twrp with twrp go install zip and install rom normally
TWRP > https://drive.google.com/drive/folders/1s6O3RMVqNe3K-mFzzo2k5vFZByABi0YF
Fluizx said:
This does not work, simply the original bootloader does not work anymore I put the original boot.img it does not enter recovery.
But I got it using the newer twrp on it I was able to reinstall the rom directly from twrp was the only way I could to reinstall the system.
Download the system from the asus site normally and install the newer twrp with twrp go install zip and install rom normally
TWRP > https://drive.google.com/drive/folders/1s6O3RMVqNe3K-mFzzo2k5vFZByABi0YF
Click to expand...
Click to collapse
Where did you get this newer twrp from?
KaMyKaSii said:
Where did you get this newer twrp from?
Click to expand...
Click to collapse
I caught this post
https://forum.xda-developers.com/ze.../recovery-twrp-3-1-1-0-ze554kl-t3692195/page7