Please someone with android 8 or 9 can provide a full system backup for twrp installation?
I installed twrp on my device, then I put the original recovery but now my device does not go into recovery mode, it only enters fastboot mode "CSC" thanks to this I can not format the device and I can not install the system, so if anyone can and has twrp make a backup of the system and make it available to me please, thank you
Edit
Finally I was able to make the device recognize the stock recovery, follow this post
https://forum.xda-developers.com/ze...ide-how-to-install-updates-twrp-root-t3818561
mee tooo
Fluizx said:
Please someone with android 8 or 9 can provide a full system backup for twrp installation?
I installed twrp on my device, then I put the original recovery but now my device does not go into recovery mode, it only enters fastboot mode "CSC" thanks to this I can not format the device and I can not install the system, so if anyone can and has twrp make a backup of the system and make it available to me please, thank you
Click to expand...
Click to collapse
if you had a link of the rom . can you please help me too. Right now my phone is same as yours . Really need your help.
Fluizx said:
Please someone with android 8 or 9 can provide a full system backup for twrp installation?
I installed twrp on my device, then I put the original recovery but now my device does not go into recovery mode, it only enters fastboot mode "CSC" thanks to this I can not format the device and I can not install the system, so if anyone can and has twrp make a backup of the system and make it available to me please, thank you
Click to expand...
Click to collapse
I did not understand. If you can only enter fastboot mode, why do you need a TWRP installable rom? You only need to install raw firmware via ASUS Flash Tool/fastboot.
Follow the tutorial below to install Nougat on your phone, then you can update it normally
https://www.asus.com/zentalk/thread-217685-1-1.html
KaMyKaSii said:
I did not understand. If you can only enter fastboot mode, why do you need a TWRP installable rom? You only need to install raw firmware via ASUS Flash Tool/fastboot.
Follow the tutorial below to install Nougat on your phone, then you can update it normally
https://www.asus.com/zentalk/thread-217685-1-1.html
Click to expand...
Click to collapse
This does not work, simply the original bootloader does not work anymore I put the original boot.img it does not enter recovery.
But I got it using the newer twrp on it I was able to reinstall the rom directly from twrp was the only way I could to reinstall the system.
Download the system from the asus site normally and install the newer twrp with twrp go install zip and install rom normally
TWRP > https://drive.google.com/drive/folders/1s6O3RMVqNe3K-mFzzo2k5vFZByABi0YF
Fluizx said:
This does not work, simply the original bootloader does not work anymore I put the original boot.img it does not enter recovery.
But I got it using the newer twrp on it I was able to reinstall the rom directly from twrp was the only way I could to reinstall the system.
Download the system from the asus site normally and install the newer twrp with twrp go install zip and install rom normally
TWRP > https://drive.google.com/drive/folders/1s6O3RMVqNe3K-mFzzo2k5vFZByABi0YF
Click to expand...
Click to collapse
Where did you get this newer twrp from?
KaMyKaSii said:
Where did you get this newer twrp from?
Click to expand...
Click to collapse
I caught this post
https://forum.xda-developers.com/ze.../recovery-twrp-3-1-1-0-ze554kl-t3692195/page7
Related
Well with the fact that i just 'Beginner' in android -developer world i spent two days (read and search) to just know what the right steps to have unofficial rom . So this is not thread from professional it's just what i understand so far . (SORRY FOR BAD ENGLISH)
It's some simple Steps :
1) First you need to root your Device to have fully adminstrator . (This make you can execute terminal order from you and the apps)
2)After you get root install flash tool To do Setup 4 . (Rasher or Flashify)
3)You must UNlocked you bootloader . (So the new rom can edit your boot process)
4)Install custom Recovery [CWM]or[PHILZ]or[TWRP]. (This make you can do zip install from external card)
5)Get your rom download and copy to your external card.
NOW YOUR READY
OK Now my guide is for LG G2 MINI (D618)
The custom rom is [ROM][5.1.1][D618/D620] Cyanogenmod 12.1 Stable
And my phone have OFFICIAL android 5.0.2 lollipop
1) ROOT : FOLLOW THIS GUIDE
http://forum.xda-developers.com/g2-mini/development/root-root-g2-mini-lollipop-t3123652
If it not success . do factory reset and start the root again but this time (don't setup superSU from store and don't restart your phone and IT's su Not Su) this should success .
2) DOWNLOAD THE FLASH TOOL FROM PLAY STORE AND KEEP IT
3) BOOTLOADER : FOLLOW THIS GUIDE (YOU MUST TAKE BACKUP FOR YOUR PHONE FIRST)
http://forum.xda-developers.com/g2-mini/development/bootloader-d620-d618-t3127819
4) CUSTOM RECOVERY : FOLLOW THIS GUIDE (CWM SUCCESS WITH ME) (JUST FLASH .IMG FILE WITH SETUP NUM (2))
http://forum.xda-developers.com/g2-mini/development/recovery-lg-g2-mini-d618-v10c-t2854493
5) DOWNLOAD THE FILE YOU NEED FROM HERE AND COPY TO EXTERNAL CARD AND FOLLOW Installation :
http://forum.xda-developers.com/g2-mini/development/rom-cyanogenmod-12-1-stable-t3175833
NOW IF THIS SETUP'S SUCCESS THE HARD PART IS OVER.
6) Now reboot into recovery mode (you will find this in Flash tool)
in recovery mode you need just two things (WIPE AND INSTALL)
7)CHOOSE "Wipe" CACHE, DATA and SYSTEM (THIS WILL DELETE YOUR PERSONAL DATA AND SETTING AND EVERY THING)
8)CHOOSE INSTALL ZIP FROM EXTERNAL CARD AND CHOOSE FIRST KK_BOOTSTACK_D618_1.1.ZIP THEN cm-12.1-20150828-UNOFFICIAL-g2m.ZIP
9) RECOMMENDED TO INSTALL GAPPS (tk_gapps-modular-pico(uni)-5.1.1-20150824-signed.ZIP)
10) NOW YOU HAVE DONE .. REBOOT YOUR PHONE AND IT WILL DO SOME INSTALL FOR ABOUT 10 MINUTE AND YOU WILL SEE SETTING SETUP ON THE SCREEN
11)F YOU HAVE unstable SIM signal JUST GO TO RECOVERY AND WIPE ONLY CACHE IT WILL BACK TO NORMAL.
THIS IS MY experience ON MY G2 D618 I DON'T KNOW ABOUT OTHER PHONE'S
THANK YOU XDA AND XDA-DEVELOPER'S FOR YOUR HARD WORK .
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
snoK123 said:
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
Click to expand...
Click to collapse
Make sure that Unlock bootloader process success i have this problem to and i Discovered that the unsuccess unlocking bootloader operation the Responsible for this error as i understand.
Flash custom recovery process deleting the original recovery but because of unsuccess unlocking bootloader Rasher Deleting original recovery but he cannot install the new custom recovery so what i do in this case .
1)Download official android lollipop from here (chose your country ) its KDZ File and flash with LG Flashtool 2014 Here
Now do the setup from the First setup .. and setup Num 2 i just mean Flash Custom Recovery File (Dont use TWRP Use CWM with Flashify .. Rasher didn't success with me ) Hope you make it
snoK123 said:
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
Click to expand...
Click to collapse
this is the stock android recovery that means that you didn't or couldn't flash a custom recovery
make sur you extracted the zip file and flashed the recovery.img with flashify
Hmmm, did everything exactly like you've written until flashing recovery. Now I'm stuck with attached screen when entering recovery...
Any idea?
Thank you!
snoK123 said:
Hmmm, did everything exactly like you've written until flashing recovery. Now I'm stuck with attached screen when entering recovery...
Any idea?
Thank you!
Click to expand...
Click to collapse
this is the fastboot screen
the recovery you tried to flash is corrupt make sur the file isn't corrupted and the that is matching your device
i think your device is d620r and your trying to flash the one from the thread [RECOVERY][CWM][PHILZ][TWRP] G2 Mini D618
if you can boot into system reflash the matching recovery TWRP for your device if you can't connect your phone to pc
use fastboot to flash the recovery
http://forum.xda-developers.com/g2-mini/development/recovery-twrp-2-8-3-0-recovery-lg-d620-t2990196
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
snoK123 said:
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
Click to expand...
Click to collapse
don't know what's wrong !! if bootloader was locked you will have a security error on boot not the fastboot screen when enterig to recovery maybe you're doing the wrong combination to access recovery try with an application or with flashify or rasher to reboot to recovery
snoK123 said:
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
Click to expand...
Click to collapse
give us screen shot of (about software) in your phone
I All, i lost two days trying to flash the recovery with rashr ....
With flashify everything was ok!!!
So please try with it
At least on my case the problem was just the app rashr that does not work on my phone
xander33 said:
I All, i lost two days trying to flash the recovery with rashr ....
With flashify everything was ok!!!
So please try with it
At least on my case the problem was just the app rashr that does not work on my phone
Click to expand...
Click to collapse
The same happen with me so I put the general tool for all users and I mentions the successful tools that work with me
Sent from my LG-D618 using XDA Free mobile app
Hi All
I've got a Oneplus X, rooted, unlocked, running TWRP but i accidently wiped System when doing a ROM Flash.
The problem i have now is when i try and flash either 2.1.2 or 2.1.3 i get a flash error saying device unrecognized. ROM for oneplus x device is "."
How the hell do i get round this ? i can't install any ROM's at the moment so i'm left with a phone i can get in to TWRP or Bootloader but can't do anything else with !!
HELP
To flash oxygen agin you have to have stock recovery try flashing stock recovery then flash rom
Sent from my ONE E1003 using Tapatalk
Do you really need stock recovery to flash the Oxygen ROM ??? Where can i grab the latest Stock Recovery and how do i install it, is it flashable ?
If i can use TWRP where can i get the latest supported version of that ?
thesponz said:
Do you really need stock recovery to flash the Oxygen ROM ??? Where can i grab the latest Stock Recovery and how do i install it, is it flashable ?
If i can use TWRP where can i get the latest supported version of that ?
Click to expand...
Click to collapse
Twrp link:-http://forum.xda-developers.com/devdb/project/dl/?id=15364
Rom:- http://ns336247.ip-91-121-110.eu/h2o64/ONEPLUS_OTA/
First download full system dump then otas
And if you cant enable mtp then copy the files to sd card(if you dont have borrow it from somewhere) then flash it
The problem I have now is the phone isn't recognised in fastboot.
If I do adb devices in TWRP is returns the phone ID with phone is not Authorized. Won't allow me to adb sideload either....
any ideas how to force the phone to be authorized ?
ROM link says 404: Website not found
mohammedtabish said:
Twrp link:-http://forum.xda-developers.com/devdb/project/dl/?id=15364
Rom:- http://ns336247.ip-91-121-110.eu/h2o64/ONEPLUS_OTA/
First download full system dump then otas
And if you cant enable mtp then copy the files to sd card(if you dont have borrow it from somewhere) then flash it
Click to expand...
Click to collapse
ROM: Link doesnt work, says ERROR 404: Website not available
tigerkir said:
ROM: Link doesnt work, says ERROR 404: Website not available
Click to expand...
Click to collapse
you can flash it with stock recovery
https://drive.google.com/file/d/0B3AIip-hiOnNb1pBeGNlcUIyYmc/view?pref=2&pli=1
its 2.1.2 full system dump then download the otas through system updates in settings
Here is the last 2.1.3-X full zip
https://www.androidfilehost.com/?fid=24269982087013219
Just flash it via recovery
Sent from my ONE E1003 using Tapatalk
If nothing else works and worse comes to worse. This guide will show you how to make everything stock again. Just e forewarned your data will be erased. so backup in TWRP and then backup that backup on your PC.
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
INSTALL TWRP AND ROOT LENOVO P1M
Check this first.
a) Take backup of your important data at safe place.
b) Device must adequately charged.
c) Install USB drivers (MTK USB ALL + MTK VCOM DRIVER) to your PC. (For Windows) (Extract the driver zip and read the ReadMe.txt to install Usb Drivers)
Install TWRP
Follow the steps below.
Note : Use only TWRP 3 if your device is New Version or else your device will face some problem.
1) Download Sp Flash Tool and TWRP3 then Extract the Flash Tool & TWRP. – Then open " flash_tool.exe ".
2) Select " MT6735M_Android_scatter.txt ". It will locate in TWRP 3 folder.
3) Click Options on the top left side of the Flash Tool then check Download and make sure both of them are checked.
4) Select the " Download Only " to flash recovery.
5) Now just click on checkbox recovery and browse to the extracted files and locate " recovery.img ".
6) Turn off your Lenovo Vibe P1m
7) Click the big Download button on top right and connect the phone with usb cable in switch off condition.
8) Now you will see the red stripe showing download percentage.
9) Your phone is successfully installed TWRP now.
Steps to enter Recovery mode in Lenovo VIBE P1m :
1) Press and hold the Volume Down Button + Power Button.
2) When you see the Boot Screen, Release the Buttons.
3) Select Recovery mode using Volume Down.
4) Press Volume Up to Enter Recovery mode.
Note : When you flash recovery, do not switch on the device directly or else the recovery will replace by stock recovery.
Now TWRP recovery is installed on your Lenovo Vibe P1m.
Root Lenovo Vibe P1M
After installing TWRP on Lenovo Vibe P1M, follow the given steps to root it.
1) Download SuperSU from here.
2) Place the downloaded SuperSu zip in your external SD card.
3) Boot into Recovery Mode.
4) Click the Install menu on TWRP.
5) Browse the SuperSu zip you've downloaded and install it.
6) After SuperSu zip is successfully installed, Reboot your device.
7) Your Device is Rooted now.
Warning: I am not responsible if anything goes wrong, bricked device.
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Sorry for the late reply... i hope you've fixed it now..
Vlk Is My Name said:
Sorry for the late reply... i hope you've fixed it now..
Click to expand...
Click to collapse
Yes bro...i try another version of twrp & its work for me
subhyendu said:
Yes bro...i try another version of twrp & its work for me
Click to expand...
Click to collapse
Twrp 3.1.0 is now available...
Vlk Is My Name said:
Twrp 3.1.0 is now available...
Click to expand...
Click to collapse
How to update bro..
subhyendu said:
How to update bro..
Click to expand...
Click to collapse
Download the update and install through the previous twrp or flashify or sp flash tool or adb fastbooot, etc
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Same problem here!! ?? (Not fixed yet)?
Rocker223 said:
Same problem here!! ?? (Not fixed yet)?
Click to expand...
Click to collapse
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
subhyendu said:
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
Click to expand...
Click to collapse
By the way, I had already rooted it!! And now somehow I got it fixed!
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
SHUBHAM 13 said:
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
Click to expand...
Click to collapse
sorry for the late reply.. no need to unlock bootloader.. you can just flash TWRP via SP Flash tool.
I can't find the usb driver for windows 10.Can any one give the link?
how to update my twrp
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
hendra.dunk said:
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
Click to expand...
Click to collapse
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Vickyvignesh said:
I can't find the usb driver for windows 10.Can any one give the link?
Click to expand...
Click to collapse
yeahhh... me too... :crying: that's why I dual boot with win 7
Vlk Is My Name said:
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Click to expand...
Click to collapse
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
hendra.dunk said:
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
Click to expand...
Click to collapse
that may be due to the incompatible of updater script and twrp
Success!
Successfully booting into TWRP using this method. Thanks. My firmware is S040 (year 2017).
Dude, can you reupload the TWRP3 file from google drive? It got deleted. THANKS!
Hello,
i was on EMUI 9 with my BKL-L09 and decided to give the custom roms a new try.
So i backed up my recovery_ramdisk (it was rooted with magisk before) and then flashed twrp (version 3.2.3-3).
Now i went for Wipe>format data and gave it a try. Result: it was hanging after makefs->(..) done. So i done the whole procedure again but it was still hanging.
Now i can't get back into twrp, because only the twrp bootscreen is showing up. Even after restoring my recovery_ramdisk backup with fastboot i can't get back into erecovery Is there anything i can do?
Thanks.
Ok, i solved this by myself through downloading the full ota update, extracting everything and flashing new kernel, system and recovery from ota update contents.
Can you put the CMD lines to do it?
Thank you anyway. I think i have the same problem.
jesusdoar said:
Can you put the CMD lines to do it?
Thank you anyway. I think i have the same problem.
Click to expand...
Click to collapse
I don't have this smartphone anymore but i remember the following:
1. Download the Full OTA Zip (e.g. here: https://www.getdroidtips.com/huawei...-update-for-honor-view-10-download-available/
2. Use the Huawei Update Extractor to extract the partitions from the content in the zip file. (https://forum.xda-developers.com/showthread.php?t=2433454)
3. Flash the partitions over the existing ones on your V10 using fastboot "fastboot flash recovery_ramdisk recovery_ramdisk.img , ...) - these contents are inside the full ota package
Greetings
Did it work out for you?
You can also try to flash the original erecovery using fastboot und use the download option inside the Recovery App. This will reset all partitions back to default. But also all data is lost.
Brodelpiet said:
Did it work out for you?
You can also try to flash the original erecovery using fastboot und use the download option inside the Recovery App. This will reset all partitions back to default. But also all data is lost.
Click to expand...
Click to collapse
it works thank you, now the problem is that the erecovery doesn´t download the package to flash.
jesusdoar said:
it works thank you, now the problem is that the erecovery doesn´t download the package to flash.
Click to expand...
Click to collapse
Did you just flash the erecovery or also the normal recovery partition und Kernel from the zip? What kind of error do you get?
Brodelpiet said:
Did you just flash the erecovery or also the normal recovery partition und Kernel from the zip? What kind of error do you get?
Click to expand...
Click to collapse
Yeah i flashed the kernel and the recovery ramdisk. And now it boots into erecovery, but inside the erecovery, the option to download and install the last version of emui doesn´t work, it just shows an error that it can´t get the package info.
thanks for your attention.
greets
Hello all,
It's a long time that's i haven't post a thread here but i have a question.I have a Poco with MIUI Global 9.6 Stable (9.6.25.0) for ROM with a Android Version 8.1.0 OPM 171019.011 with root acces, unlocking bootloader and TWRP 3.3.0-0 installed.
I would upgrade my phone to something "newer" (A ROM with Android 12 if possible) and conserv the root access and my apps.
I have read that now ,we should have 3 files to do that (firmware,system and vendor) to make a wipe and install new ROM with TWRP.
So my question:
-Is it possible to upgrade Android 8.1.0 to Android 12 witn a new ROM? (i have read something about kernel in Android12 but haven't understand all)
-Have i missed some steps or just download files,boot TWRP,wipe and install newer ROM+firmware and vendor appropriate is good?
-Which ROM do you recommend?
Thanks for the previous answers.
devil1 said:
Hello all,
It's a long time that's i haven't post a thread here but i have a question.I have a Poco with MIUI Global 9.6 Stable (9.6.25.0) for ROM with a Android Version 8.1.0 OPM 171019.011 with root acces, unlocking bootloader and TWRP 3.3.0-0 installed.
I would upgrade my phone to something "newer" (A ROM with Android 12 if possible) and conserv the root access and my apps.
I have read that now ,we should have 3 files to do that (firmware,system and vendor) to make a wipe and install new ROM with TWRP.
So my question:
-Is it possible to upgrade Android 8.1.0 to Android 12 witn a new ROM? (i have read something about kernel in Android12 but haven't understand all)
-Have i missed some steps or just download files,boot TWRP,wipe and install newer ROM+firmware and vendor appropriate is good?
-Which ROM do you recommend?
Thanks for the previous answers.
Click to expand...
Click to collapse
It's not possible to switch from stock ROM to custom without doing clean install. You will have to root again.
First update to latest Official Stock ROM, then take backup of your files to your PC or to SDCard (if you have one) , flash to latest Official TWRP and check my POCO F1 Ultimate Collection & Guides. You can find everything there. I have awarded recommended ROMs in my collection.
Feel free to ask if you have any question regarding the guides.
Thanks for the answer.I have begin to read your guides.
If i understand good,it's not possible to conserv my root,unlock bootloader and twrp when i upgrade to android 12? Automaticaly i should root again my phone and restore with titanium backup my files,contact,....?
devil1 said:
Thanks for the answer.I have begin to read your guides.
If i understand good,it's not possible to conserv my root,unlock bootloader and twrp when i upgrade to android 12? Automaticaly i should root again my phone and restore with titanium backup my files,contact,....?
Click to expand...
Click to collapse
First you need to take backup of your files to PC or External SDCard.
Then you should update to latest version of MIUI via OTA if it's possible or via TWRP (you can use the stock recovery rom to do it via twrp). (You can also use my guides for clean install stock rom)
Then you should unlock your bootloader if it's not already unlocked.
Then flash latest Official TWRP.
Then flash latest firmware (not vendor) just to make sure you are on the latest. (You should be on latest firmware after updating to the latest MIUI version)
Then Wipe everything + format data according to my guides and flash the ROM you want. If you choose A12 Pixel Experience or crDroid keep in mind that these ROMs use their own recovery because these are encrypted by default ROMs and TWRP can't handle the decryption of A12 encrypted ROMs yet. So to make OTA updates and that stuff work correctly devs of these ROMs decide to use their own recovery which can handle the decryption of encrypted roms and as result to make OTA update work fine. Check the installation instructions of these roms in their threads. (Afterwards you can use adb sideload to flash stuff using these recoveries)
After that, flash Magisk since you want root.
Then you can restore titanium backup if you want.
OK i follow your instruction.Thanks
Hello retrial,
I have now updating my phone to MIUI Global 12.0.3 Stable with Android Version 10QKQ1.My phone is not yet rooted and now he is encrypted.The recovery is now Mi-Recovery 3.0
I have unlock again my bootloader.
Now to follow your instruction,i should flash the latest TWRP.
I have take TWRP-3.6.0_9-0-berylium in your guide.
I think i should do Fastboot Method because i'm now in Mi-Recovery?i'm right?
No problem with the encryption?
Thanks.
i have find this video.This is not the good phone but i think that the installation is the same:
devil1 said:
Hello retrial,
I have now updating my phone to MIUI Global 12.0.3 Stable with Android Version 10QKQ1.My phone is not yet rooted and now he is encrypted.The recovery is now Mi-Recovery 3.0
I have unlock again my bootloader.
Now to follow your instruction,i should flash the latest TWRP.
I have take TWRP-3.6.0_9-0-berylium in your guide.
I think i should do Fastboot Method because i'm now in Mi-Recovery?i'm right?
No problem with the encryption?
Thanks.
Click to expand...
Click to collapse
Yes use Fastboot Method to flash TWRP. No problem with encryption.
After that follow my clean install custom rom guide to flash the ROM you want. Also please check the instructions in the threads of ROMs you want to flash. A12 crDroid and PE use their own recoveries.
Basically tell me which ROM you want to flash to help you exactly with steps.
Hello retrial,
i have a problem to install TWRP-3.6.0-9-0 on my pocophone.Everything working fine but in step 8 of your guide,i can't find my twrp.img that i have copied in 2 different case to test :
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example: fastboot boot C:\Users\Retrial\Desktop\twrp-3.5.2_9-0-beryllium.img
Have you an idea to why i cannot find my twrp.img in the boot mode?
devil1 said:
Hello retrial,
i have a problem to install TWRP-3.6.0-9-0 on my pocophone.Everything working fine but in step 8 of your guide,i can't find my twrp.img that i have copied in 2 different case to test :
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example: fastboot boot C:\Users\Retrial\Desktop\twrp-3.5.2_9-0-beryllium.img
Have you an idea to why i cannot find my twrp.img in the boot mode?
Click to expand...
Click to collapse
Send a screenshot what you type in cmd and where you have the twrp.img
Or you mean you can't find it in your device while you are booted on TWRP?
i cannot find the twrp.img in my device.The step 8 of your tutorial.
I have copied the files but cannot find it in the cases.I have take TWRP-3.6.0-9-0
The link of the files: https://eu.dl.twrp.me/beryllium/twrp-3.6.0_9-0-beryllium.img.html
devil1 said:
i cannot find the twrp.img in my device.The step 8 of your tutorial.
I have copied the files but cannot find it in the cases.I have take TWRP-3.6.0-9-0
The link of the files: https://eu.dl.twrp.me/beryllium/twrp-3.6.0_9-0-beryllium.img.html
Click to expand...
Click to collapse
Are you sure you select Install Image?
ok i have download an other twrp.img and this time it's ok.i can go to the end of the tutorial but when i reboot my device mi-recovery 3.0 come back.I have tried 2 times but all the time mi-recovery3.0 come back
Have you an idea?
Should i take a additional command like in the video i have send you in the thread "fastboot flash recovery"?
devil1 said:
ok i have download an other twrp.img and this time it's ok.i can go to the end of the tutorial but when i reboot my device mi-recovery 3.0 come back.I have tried 2 times but all the time mi-recovery3.0 come back
Have you an idea?
Should i take a additional command like in the video i have send you in the thread "fastboot flash recovery"?
View attachment 5549731
Click to expand...
Click to collapse
I have all the steps on my guide. Please read it carefully. It boots back to mi recovery because you haven't flash TWRP yet just booted into. After boot into TWRP u need to flash twrp in recovery section so it will stay after reboot.
Please read the steps.
Download portable Minimal ADB and Fastboot and latest Official TWRP recovery.
Open cmd from minimal adb and fastboot and write:
fastboot boot and the path you have TWRP.
Example:
Code:
fastboot boot C:\Users\Retrial\Desktop\twrp-3.6.0_9-0-beryllium.img
Then proceed with the rest steps in my guide. Connect ur device to pc while u are booted into TWRP and copy TWRP.img to your device. Then in TWRP press Install Image and select the twrp.img u just copied into ur device. Select recovery and done.
I have made a video to show you what happened (sorry for the bad quality and the moove) :
I think a video is easyest to understand my problem.For information my bootloader is unlock and usb debugging ok.
devil1 said:
I have made a video to show you what happened (sorry for the bad quality and the moove) :
I think a video is easyest to understand my problem.For information my bootloader is unlock and usb debugging ok.
Click to expand...
Click to collapse
Hmm strange, probably of MIUI. Anyway since you are going to flash custom rom, when u flash twrp in recovery go back and select wipe and wipe everything (read my clean install guide), go back press format data type yes, and then reboot to TWRP.
EDIT: I just saw u rebooted to system. That's not what we want. Press reboot to recovery.
i reboot first to bootloader after have flash the twrp.img in recovery.That's only the second time that i reboot to system to use the normal mode of the phone and reboot after to recovery mode to show you that mi recovery is back.
devil1 said:
i reboot first to bootloader after have flash the twrp.img in recovery.That's only the second time that i reboot to system to use the normal mode of the phone and reboot after to recovery mode to show you that mi recovery is back.
Click to expand...
Click to collapse
The TWRP flashed correctly. You overlap it again by pressing reboot to recovery from MIUI updater.
Don't do that...do the combination to boot to TWRP after flashing it. Power+Volume Up.
And continue with clean install steps in my guide to flash custom rom.
In my guide I write nowhere to boot to MIUI and press from MIUI Updater reboot to recovery, please stick to my guide and you will be fine.
Poco f1 update not