How to root the Homtom HT16 - Android Q&A, Help & Troubleshooting

Hi there,
I recently got the Homtom HT16 for just 50 bucks. I've always rooted my phones with a one-click rooting app(kingoroot etc.), but it seems not to work. I did some reading and saw you need TWRP to root the device. Now there is no TWRP for the device, saw on xda there was for the HOMTOM HT7.
Anyone knows if I can use the TWRP for the HT7 or is there any other way to root my phone?

Sorry for late response. On Russian forum you may find way to install recovery with Flash tool, however that didn't worked for me. Their TWRP recovery is useful for rooting. This is 100% tested, I own HOMTOM HT 16.
1. Install adb-setup-1.4.3 to enable adb, fastboot and Google USB driver on computer..
https://www.dropbox.com/s/wvsyab1iakpsswu/adb-setup-1.4.3.exe?dl=0
2.Settings-Developer optons Enable USB Debugging and Allow OEM unlocking
3.Put on sd card SuperSU-v2.78-201609011115 (this version worked for me).
https://www.dropbox.com/s/84xm1m7rxerg6kt/SuperSU-v2.78-201609011115.zip?dl=0
4. Turn off the phone, press Power and Volume up. You'll see new menu. Move with Volume up, choose Fastboot and press Volume down. Connect computer and phone with USB cable.
5. Find the directory where adb and fastboot are installed and position itself there . Hold Shift, right-click and choose Open command window here. ( If you are not the administrator, Windows 10 Start, Command Prompt (Admin) and position yourself in directory where fastboot is installed with cd command).
Copy TWRP recovery (recovery.img) in that folder.
https://www.dropbox.com/sh/t26oax8n96izp60/AACq00Cgo1iMFOWPAT8leRXZa?dl=0
5.Type and execute commands:
fastboot devices (check if device if recognized, you'll see the serial number)
fastboot oem unlock (press Volume up to unlock bootloader)
fastboot flash recovery recovery.img (install new recovery on phone)
6.Pull out battery, push it back . Hold Power and Volume up. You'll see new menu. Move with Volume up, select Recovery and press Volume down.
7. Don't make attention to blinking and bad performance of Recovery. Select Install, find SuperSu on sd card and install. If everything is ok, you will see notification that superuser is successfully installed.
8. Reboot phone and check with Root checker application root rights.
(optional) If you need restore factory recovery and remove Superuser, to keep warranty valid.
https://www.dropbox.com/sh/s6dvqr8ge72otfu/AACgOQ7CgrVk94o0_K6ACXtIa?dl=0

Hi, all I received yesterday the z11 max. Install recovery with super your and comborom V6.2 all ok. Problem does not update ota, it tells me no updates. I have made to the wrong? Thank you.

Hi.
After step 6. I could not enter in the new recovery menu. I get some error messages (attached picture) then the phone is restarting. What could be the problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 06:41 PM ---------- Previous post was at 06:34 PM ----------
The image not visible, these are the error message:
'Could not mount /data and unable to find crypto footer'
`Unable to mount storage`
and so one....

pecs72 said:
Hi.
After step 6. I could not enter in the new recovery menu. I get some error messages (attached picture) then the phone is restarting. What could be the problem?
...
and so one....
Click to expand...
Click to collapse
I downloaded the original fw from needrom, then I put back the original recovery.img, so now it's as original, but without root...

I don't know what is the problem, this procedure worked on my phone.
Look here:
https://forum.xda-developers.com/s7-edge/help/twrp-mount-data-unable-to-crypto-footer-t3360331

**** my phone factory resseted it self

No matter what I do, my phone doesn't allow to be found when I make "fastboot devices".

Can someone that have rooted the phone please do a readback of the entire rooted rom and upload for me?
I'm facing a lot of problem installing the recovery , so if someone can please post a rooted rom it'll be useful ...

Edit : can someone backup his nvram partition? I lost my imei and with this phone any trick wont work...

dani the hack said:
Can someone that have rooted the phone please do a readback of the entire rooted rom and upload for me?
I'm facing a lot of problem installing the recovery , so if someone can please post a rooted rom it'll be useful ...
Click to expand...
Click to collapse
Hi, for me the SuperSU from holocen (see above):
togeter with the TWRP image, flashtools v5 and the description from needrom worked for me (not every emailprovider can be used to create an account):
needrom.com/download/homtom-ht16-4/
Greetings Rikski

Solution found in here!!
Use TWRP for cyanogen after installing it with sp tools v5.
Put SuperSU v2.82 or above in the phone or sd memory card go to custom recovery and install the SuperSU v2.82.zip file. Reboot and that's it. It works like a charm. :good:

7. Don't make attention to blinking and bad performance of Recovery. Select Install, find SuperSu on sd card and install. If everything is ok, you will see notification that superuser is successfully installed.
How long does blinking take usually? It blinks all the time, I can't select Install ?!

This phone has now nearly 30 ROMs on needrom.com
Plus a non blinking custom TWRP recovery, go check it out:
needrom.com->Doogee->Homtom->ht16

I tryed to follow the guide of holocen (also used much of external information) but right now i'm stuck in a bootloop.
First of all i needed hours of reading and troubleshooting to get my adb "cmd" working proberly with the "bootloader mode" (cause of a driver problem).
After i was successful ("fastboot devices. fastboot oem bootloader) , i tryed serveral twrp recovery *.img's (officials first, holocen's later on), but i can't get the ht16 out of bootloop. Recovery flashing seems to be successfull though.
If i try "volume up + power" and start up the recovery manually, i got the twrp splashscreen, followed by a huge chunk of red "unable to mount xyz..." with a following bootloop (there are only seconds to see whats happening, an then the "HomTom" splashscreen reappears). I tryed "fastboot erase userdata" with no help. Was insecure about the "fastboot erase system" command though.
Maybe some of you guys are eager to help. I really tryed to read up as much information i could about this topic. I thank you in advance.
Target was to root the phone and to install some kind of lightwight custom rom (just to get rid of those frikk'n "trojans, bloatware-viruses, marketing horrors" which are messing with the stock rom. Hopefully everybodys know right now what i'm talking about).
I try to respond quickly, but i can't garuentee.
Thank you very much for reading.
Best regards
B4dLuck

Related

3/4/15 NEW HOWTO ROOT & install TWRP on DL701Q/DigiLand 7" Tablet 4.4.2 KitKat

3/4/15 NEW HOWTO ROOT & install TWRP on DL701Q/DigiLand 7" Tablet 4.4.2 KitKat
Ok, So you got your new Super Cheapo MTK8127 quad core Tablet from BestBuy or some other overpriced electronics emporium and want to install root and a custom recovery So it won't suck nearly as bad
Feeling hungry but don't wanna feed yourself??? Open wide......Here comes the airplane requesting permission to land
The Following procedure may "BRICK" your tablet and wipe your porn....You do so at your own risk, Neither Kneee or his lawyer claim to know ANYTHING about android....or anything else for that matter
THIS GUIDE WILL WIPE YOUR PORN!!!
If you've ever seen THIS:http://forum.xda-developers.com/chef-central/android/root-dl701q-install-twrp-touch-recovery-t2980339thread, You know that "iRoot/vRoot no longer works since updating to kitkat. I've BUNGLED my way into a solution, Hope it helps you too.....
THIS GUIDE ASSUMES YOU KNOW HOW TO USE ADB AND FASTBOOT (ENABLE USB DEBUGGING)OR AT LEAST KNOW WHAT THEY ARE AND DON'T SUFFER FROM GOOGLEPHOBIA
#1 Making a backup of this crap software when ADB , FASTBOOT and SP flash tool are working correctly is pointless (IMHO) (inm
Here's Everything you should need:
Stock ROM COURTESY...THIS DUMBASS https://drive.google.com/file/d/0B9DmzLnUt5tuaUtJS1FHcjNyX1U/view?usp=sharing
ADB_&_FASTBOOT_executables, no need to install, just extract the .zip to the directory of your choice and execute openCMD.bat with a right click + run as administrator. it will open a terminal window, you can run all your ADVB & FASTBOOT commands from there:https://drive.google.com/file/d/0B9DmzLnUt5tuM29vOTNHNEZya2s/view?usp=sharing
Driver installer & MTK_SP_FLASH_TOOL for MT8127 use this to install the drivers and flash the stock rom + custom recovery.img https://drive.google.com/file/d/0B9DmzLnUt5tudVlrSEtzSE1tWHc/view?usp=sharing
UBIFS_Modified_CWM FOR FLASHING UPDATE-SuperSU-v2.46.zip COURTESY Vampirefo: https://drive.google.com/file/d/0B9DmzLnUt5tueC04RDFVX3plTVk/view?usp=sharing
UPDATE-SuperSu-v2.46.zipflash this with vampirefo's modified CWM recovery image UBIFSRecovery4SuperSu.img" https://drive.google.com/file/d/0B9DmzLnUt5tuZjlmVm1Wc2tFUTA/view?usp=sharing
TWRP Setup.exe...Used to install TWRP recovery after flashing Stock ROM + Custom recoveryCOURTESY TWRP team & Protocol 9https://drive.google.com/file/d/0B9DmzLnUt5tuTVVJS2d2RERpbVk/view?usp=sharing
STEP 1: INSTALL THE DRIVERS INSIDE THE MT8127 SP_FLASH_TOOL.zip" file you downloaded It will install the mtk usb vCOM driver we need for the mtk8127. if u have questions PM vampirefo. after that, turn your tablet upside down, FIND THE reset hole and jam the nearest tiny object in there until the screen does something different (like go black) release the reset button, hold VOLUME DOWN and plug in the USB cord and the tablet should be reconized as a preloader USB VCOM Port device under "Ports" in Device Manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, the necessary driver to save this POS is at hand. after it's done installing the tablet will probably reboot and the remaining drivers will install. (EVEN WITHOUT THE OTHER DRIVER YOU CAN ROOT AND FLASH NOW)
Fire up the MT8127 SP flash tool (run as administrator) you downloaded and you should see this:
Click "Scatter-Loading" and select the scatter file located in the stock rom folder you downloaded and unzipped (you DID unzip it right?) and click the "RECOVERY" FIELD LOCATED HERE:
and select the recovery image you downloaded called "UBIFSRecovery4SuperSu.img......yay, you should be all set up and ready to go!
Make sure youve already unplugged the USB cable AND hit the reset button. HIT THE DOWNLOAD BUTTON (the program is now waiting for your device...no rush) HOLD VOLUME DOWN AND PLUG IN THE USB CABLE, the computer will detect the device, the program will proceed to shove a bunch of ones and zeros down the the tablets throat and it will reboot (hopefully to a mediatek logo).
If so, youre not as stupid as everyone says when u leave the room
Toss "UPDATE-SuperSU-2.46.zip" on a microSD, Power off the device, shove the SD in his home and hold POWER + VOLUME UP until you get prompted to select either RECOVERY OR FASTBOOT, we want recovery so make sure it's selected and press VOLUME DOWN to boot into recovery & install your SuperSU.zip and reboot
once the OS is fully running, run TWRP.exe as ADMINISTRATOR in AUTO mode, TWRP recovery should be installed and u should still have root, if not, you'll need to go into advanced, then mount system before re-installing from zip.
NOW learn ADB and fastboot so I can save my breath next time:
PS, all your GAPPS are gone....quit *****ing, I've got em here: htpa_gapps-modular-micro-4.4.2-20140608-signed.zip(pa_gapps-modular-micro-4.4.2-20140608-signed.zip 85.3MB) & HERE: https://drive.google.com/file/d/0B9DmzLnUt5tuSl9lME9VZnFJTU0/view?usp=sharing(pa_gapps-stock-4.4.2-20140608-signed.zip 267MB))
I have requested this thread be removed, you are using my stuff without permission, and even crediting yourself with the firmware, I took the time to download, you yourself have done nothing but take others work including mine without permission.

Vernee M6 Root

Hello, please help me to root Vernee M6. Thank you!
MoeKyawThu991 said:
Hello, please help me to root Vernee M6. Thank you!
Click to expand...
Click to collapse
Hello, I too want recovery and root for the Vernee M6
Orat60 said:
Hello, I too want recovery and root for the Vernee M6
Click to expand...
Click to collapse
I have M6 also. I would buy 1 for somebody who can create us a ASOP ROM with root and recovery!
Hi, developer here, just asked Vernee for kernel source code so i can start developing a custom recovery asap.
Regards.
josalaito said:
Hi, developer here, just asked Vernee for kernel source code so i can start developing a custom recovery asap.
Regards.
Click to expand...
Click to collapse
Awesome josalaito!
Root done! Writing and posting a tutorial ASAP!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 05:38 PM ---------- Previous post was at 05:23 PM ----------
Rooting Vernee M6:
First of all, unlock developer settings by going to Settings - Phone Status and pressing 10 times over Build Number.
Then, in developer settings, turn on OEM Unlocking flag and USB Debugging.
Download this pack.
Open a cmd terminal, drive to the unpacked folder and type the following commands: (IMPORTANT: THIS WILL ERASE ALL YOUR DATA, MAKE A BACKUP FIRST)
adb.exe reboot-bootloader
fastboot.exe oem unlock
After this, reboot and configure the phone, reenable USB Debugging, install Magisk Manager and again type the following commands:
adb.exe reboot-bootloader
fastboot.exe flash boot root_boot.img
Ur phone is now rooted.
josalaito said:
Root done! Writing and posting a tutorial ASAP!
---------- Post added at 05:38 PM ---------- Previous post was at 05:23 PM ----------
Rooting Vernee M6:
First of all, unlock developer settings by going to Settings - Phone Status and pressing 10 times over Build Number.
Then, in developer settings, turn on OEM Unlocking flag and USB Debugging.
Download this pack.
Open a cmd terminal, drive to the unpacked folder and type the following commands: (IMPORTANT: THIS WILL ERASE ALL YOUR DATA, MAKE A BACKUP FIRST)
adb.exe reboot-bootloader
fastboot.exe oem unlock
After this, reboot and configure the phone, reenable USB Debugging, install Magisk Manager and again type the following commands:
adb.exe reboot-bootloader
fastboot.exe flash boot root_boot.img
Ur phone is now rooted.
Click to expand...
Click to collapse
Rar file doesn't open
rodpgfx said:
Rar file doesn't open
Click to expand...
Click to collapse
Try this mate M6.zip
josalaito said:
Try this mate M6.zip
Click to expand...
Click to collapse
That one worked.
rodpgfx said:
That one worked.
Click to expand...
Click to collapse
Perfect, i hope i can bring TWRP asap, to AOSP rom i contacted Vernee to source code but still no answer
I tried every way to try to extract recovery from the firmware.....no way! Doesn't show recovery in partitions
Root
Crackloi said:
Root
Click to expand...
Click to collapse
The phone is already rooted. I wouldn't be able to see the system partition otherwise.....
Guys any luck getting any scatter files for this phone? I sent Vernee multiple messages and not one reply! I need the firmware for this phone so I can fix it. Stuck in bootloop now with not even option for recovery.....
I could work with this device this week and finally build a working TWRP device(Data partition decryption dont work, but i'm working on a kernel which dont encrypt data), you can backup system, boot and much more to a external sd card.
Get it from here: recovery.img
Reboot fastboot mode and perform the following commands:
Fastboot flash recovery recovery.img
Fastboot boot recovery.img
Once on recovery, keep the device blocked for a min or two, and then unlock it, allow system modifications, go to mount, mount system, then click on options, file explorer, go to system folder and delete the recovery-from-boot.p file.
I cannot get my phone to go to fastboot, recovery or anything else. Just keeps boot looping.....
rodpgfx said:
I cannot get my phone to go to fastboot, recovery or anything else. Just keeps boot looping.....
Click to expand...
Click to collapse
Didnt work fully turning it off(Power off + Vol -) and then boot into fastboot pressing Vol + and power off at the same time?
If u make it work i can send you a system backup so you can fix your phone
I done all that. I pressed Vol + and power until it was off then vol- and power, just start boot looping again. I fear the only thing that can save it now is a scatter file...... Even AliExpress didn't help me with warranty still left, and why I will not buy from them again.
rodpgfx said:
I done all that. I pressed Vol + and power until it was off then vol- and power, just start boot looping again. I fear the only thing that can save it now is a scatter file...... Even AliExpress didn't help me with warranty still left, and why I will not buy from them again.
Click to expand...
Click to collapse
I can scatter all my partitions and upload then to you, but got not a nice connection until monday.
That would be nice. Thanks!

Start Error in Pixel Experince, by Boot.img flashed by Fastboot (phone almost brick).

Hello friends, I hope you are well. I am writing to everyone to see if anyone can help me with this big problem.
Yesterday install the Rom Pixel Experience, all good, all the steps to perfection and others, had microSD at that time so flash the boot.img by Fastboot. It seems to install the Boot.img in the Recovery TWRP partition, or something like that. Because I do not have the Recovery either, when I try to go to the recovery, the window "Bootloader Unlocked" appears, but it does not take me anywhere, only to the boot of the rom, it is something very strange and the truth scares me. I clarify: I can not access the Fastboot, nor the download mode, nor the recovery, because it does not.
There will be another way: ????
PLEASE IF SOMEONE CAN HELP ME, FIND ANOTHER METHOD TO ENTER THE FASTBOOT OR DOWNLOAD MODE, THE SOLUTION THAT WORKS WILL PAY ME WELL TO THE PROPONGA, PLEASE, I DO NOT WANT TO LOSE MY MOBILE, I BUY IT WITH A LOT OF EFFORT.
Last night I dawned on the boot logo, until it was completely downloaded and at this moment it continues to do so ... By GOD!
When trying to enter the Fastboot or download mode, it takes me here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Image extracted from: https://www.tomshw.it
Then he starts loading the rom and stays there all the time .:
Image extracted from: https://www.tomshw.it
I can not access Fastboot, nor download mode, nor recovery, because it has disappeared. There will be another way to enter the Fastboot or download mode, because the phone actually woke up until I wake up today and was even charged. PLEASE.
Hey, sorry for your sad state. Following process worked for me when I got stuck yesterday like that.
1. Connect your phone to PC ( make sure adb/fast boot is setup)
2. Hard reboot your phone with power plus volume down button.
3. As soon as your phone turns off, press volume down only and keep it pressed till you enter fastboot.
4. After this phone should be recognised in PC and you should be able to boot in TWRP using fastboot.
ZestyManu said:
Hey, sorry for your sad state. Following process worked for me when I got stuck yesterday like that.
1. Connect your phone to PC ( make sure adb/fast boot is setup)
2. Hard reboot your phone with power plus volume down button.
3. As soon as your phone turns off, press volume down only and keep it pressed till you enter fastboot.
4. After this phone should be recognised in PC and you should be able to boot in TWRP using fastboot.
Click to expand...
Click to collapse
Hope this works for you @Yeriorlando. @gimpy1 had a similar issue when installing Havoc ROM. Part of the problem seems to be when installing the custom kernel?
gimpy1 said:
It was operator error (generally is) on my part, I'm sure. The only thing I did different that I can remember is installing the 9.0 boot image in twrp differently. I installed it in the recovery option first (intentionally, should not have), instead of ticking only the boot choice. I did not untick the recovery option (should have never ticked it in the first place, but I was trying to correct a problem on the ROM, and misread a post).
Click to expand...
Click to collapse
He was able to reinstall TWRP using fastboot.
gimpy1 said:
Thx, Chaz. I pulled out my printed instructions from your post, and once I was able to get my device recognized (that did take a couple of tries), reinstalling twrp was pretty easy.
I'm back in business thanks to you.:good:
Click to expand...
Click to collapse
IF you still can't after the suggestion at top, maybe @SGCMarkus or @runningnak3d have some tips?
Unless you have an H932, then if you get the error that: "Your device software can't be checked for corruption" then you have fastboot. It is literally impossible to have that message on a WTF rooted phone and NOT have working fastboot.
So, as @ZestyManu said -- make *sure* your phone is powered off. If you have to let, the battery die. Then hold vol down + plug in the USB cable (no need to touch the power button) and you will enter fastboot.
-- Brian
Thank you all. I have solved the problem in a super crazy way, to pure ADB, not fastboot .... Pure ****ing adb ... Hehehehe. Thanks to @ChazzMatt

Repair Software Break Xiaomi MI 9 SE (Global Version)

Hello, recently software break my Xiaomi MI 9 SE, this because when triet to boot to recovery after flashing TWRP give this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And when tried to reboot into recovery dosn't work, this post is because solved this problem took me almost two days so i'm trying to help someone needed
I upload all the files needed for restore your phone and install pixel clean room
Enter to this link: (Send me private to obtain, XDA doesn't let me post any link because i'm a new user... sorry for that)
Inside is necessary to download the file with name "MiFlash.zip", unzip the file and execute the MiFlash.exe
Reboot you phone in bootloader and connect to the pc
Download the file inside de google drive link, with name "grus_eea_global_images_V10.2.9.0.PFBEUXM" this is the factory system proporsionated by xioami, this case is the global flavor
Unzip the content, and in the "MiFlash" program configure the route to the folder previously unziped, with your phone connected proced to install run the program
In this moment, we have restore our phone with the stock room, not my ideal room but solve the principal problem
So, to go forward i install twrp (probed worked) and flash another room and rooting. It's not necesary follow this steps.
Reboot to bootloader the phone and connect to the pc
Download the file "recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img"
Enter inside the folder with the image dowloaded previously
Run the follow command "fastboot flash recovery recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img"
Run the command "fastboot boot recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img" or reboot and go to the recovery
With your phone connected, download the following files ("PixelExperience_Plus_grus-9.0-20190924-1959-OFFICIAL.zip", "Magisk-v20.0.zip" and "fw-vendor_grus_miui_GRUSGlobal_V10.3.4.0.PFBMIXM_1af3c0ea1e_9.0.zip"), copy this files inside the memory of your smartphone.
With TWRP, wipe everything except the internal storage of your phone
Go to flash and install "fw-vendor_grus_miui_GRUSGlobal_V10.3.4.0.PFBMIXM_1af3c0ea1e_9.0.zip"
Flash the following zip file "PixelExperience_Plus_grus-9.0-20190924-1959-OFFICIAL.zip"
Finnaly flash the "Magisk-v20.0.zip"
Reboot your phone and wait, the magic it's happened
Well, finnaly sorry for my bad english, hope this help someone, for me took me almost 2 days to repair my phone.
Bye
walberth said:
Hello, recently software break my Xiaomi MI 9 SE, this because when triet to boot to recovery after flashing TWRP give this message:
And when tried to reboot into recovery dosn't work, this post is because solved this problem took me almost two days so i'm trying to help someone needed
I upload all the files needed for restore your phone and install pixel clean room
Enter to this link: (Send me private to obtain, XDA doesn't let me post any link because i'm a new user... sorry for that)
Inside is necessary to download the file with name "MiFlash.zip", unzip the file and execute the MiFlash.exe
Reboot you phone in bootloader and connect to the pc
Download the file inside de google drive link, with name "grus_eea_global_images_V10.2.9.0.PFBEUXM" this is the factory system proporsionated by xioami, this case is the global flavor
Unzip the content, and in the "MiFlash" program configure the route to the folder previously unziped, with your phone connected proced to install run the program
In this moment, we have restore our phone with the stock room, not my ideal room but solve the principal problem
So, to go forward i install twrp (probed worked) and flash another room and rooting. It's not necesary follow this steps.
Reboot to bootloader the phone and connect to the pc
Download the file "recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img"
Enter inside the folder with the image dowloaded previously
Run the follow command "fastboot flash recovery recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img"
Run the command "fastboot boot recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img" or reboot and go to the recovery
With your phone connected, download the following files ("PixelExperience_Plus_grus-9.0-20190924-1959-OFFICIAL.zip", "Magisk-v20.0.zip" and "fw-vendor_grus_miui_GRUSGlobal_V10.3.4.0.PFBMIXM_1af3c0ea1e_9.0.zip"), copy this files inside the memory of your smartphone.
With TWRP, wipe everything except the internal storage of your phone
Go to flash and install "fw-vendor_grus_miui_GRUSGlobal_V10.3.4.0.PFBMIXM_1af3c0ea1e_9.0.zip"
Flash the following zip file "PixelExperience_Plus_grus-9.0-20190924-1959-OFFICIAL.zip"
Finnaly flash the "Magisk-v20.0.zip"
Reboot your phone and wait, the magic it's happened
Well, finnaly sorry for my bad english, hope this help someone, for me took me almost 2 days to repair my phone.
Bye
Click to expand...
Click to collapse
can we use another rom instead of PixelExperience?
2 things:
1 - I seriously messed up my phone with that twrp. Although I was using a more recent version, I don't recommend it. Use redispade twrp instead
2 - You can and you should use another ROM. PE is dead. Just check vendor required and,if different from the one suggested by OP, flash it instead.
rzki03 said:
can we use another rom instead of PixelExperience?
Click to expand...
Click to collapse
Of course, in the example I use this room and in phome is working with some minor bugs, but @elpaablo say that it's nor longer getting support. I recommend you use another room with active development and support
elpaablo said:
2 things:
1 - I seriously messed up my phone with that twrp. Although I was using a more recent version, I don't recommend it. Use redispade twrp instead
2 - You can and you should use another ROM. PE is dead. Just check vendor required and,if different from the one suggested by OP, flash it instead.
Click to expand...
Click to collapse
Thanks, this twrp is the only that I test and work, but I don't tested the twrd indicated. And thanks for the info about the rom, I will be updated because in this time I experimented some bugs.

ADB Pull possible on boot loop? (Should have been unlocked but maybe not?)

Hello everyone,
I've been googling this for the past couple days it's been driving me crazy. Stock 7 (I think), should have been unlocked but is showing locked.
1. My friend gave me the Nexus 9 which turned off one day, then wouldn't turn on again.
2. I plugged it in, and it turned on fine. Assumed bad usb port, he said keep it. I enabled developer options, then did "OEM [bootloader?] unlock" and "USB Debugging" toggles on (from memory, may not be right phrasing)
3. While trying to back up his data on it by ADB Pull, it would randomly stop. Using it, it would reboot unexpectedly.
4. So I went to Software Update.. bad idea in retrospect probably it rebooted during or something? It was fully charged and on AC power but I wasn't watching it.
5. I come back and it keeps bootlooping. Went into recovery, says "Device Locked" - Tried clearing cache, no difference. Tried sending bootloader unlock command with fastboot, says I have to delete all data to unlock.
The only lead that I have is that it might be possible to image TWRP to recovery, then boot into it so that I can get files off it (With OTG Flash drive or USB?) - I wanted to ask for help here first.
I did my best to search for this prior, but I've been out of the ROM game since 2012 cyanogenmod days.. Hope that it's possible to save my friend's data, and then also to flash a new ROM which will solve the reboot issue.. Thanks!
Boot to recover, then when you get the Android mascot with the belly open, press ( I think vol up plus power) to get to a functional recovery with ADB support.
gk1984 said:
Boot to recover, then when you get the Android mascot with the belly open, press ( I think vol up plus power) to get to a functional recovery with ADB support.
Click to expand...
Click to collapse
Thanks GK,
After going into recovery mode, there's the android mascot with the belly open as you describe. Then, I do (VolUp+Pwr) and it produces this screen below, which I'm guessing people call "fastboot". When I'm there, my Win10 PC makes the "USB item attached" noise, and I can use fastboot commands, but adb devices won't show anything. Do you have any ideas?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I thought I could use the fastboot access I have to flash twrp, but I get the following error. I switched the "OEM Unlock" toggle, but i'm guessing that doesn't mean anything until I unlock the bootloader in recovery (which necessitates deleting all the files). I followed the directions on the twrp website which claim that root isn't needed, but I guess unlock is.
Code:
PS C:\Users\User Profile\Downloads\platform-tools_r30.0.1-windows\platform-tools> .\fastboot flash recovery twrp.img
Sending 'recovery' (13254 KB) OKAY [ 0.838s]
Writing 'recovery' (bootloader) Device State : Locked
FAILED (remote: 'Can not flash any images while device state is locked!')
fastboot: error: Command failed
Thanks again,
luciant
luciant said:
Thanks GK,
After going into recovery mode, there's the android mascot with the belly open as you describe. Then, I do (VolUp+Pwr) and it produces this screen below, which I'm guessing people call "fastboot". When I'm there, my Win10 PC makes the "USB item attached" noise, and I can use fastboot commands, but adb devices won't show anything. Do you have any ideas?
I thought I could use the fastboot access I have to flash twrp, but I get the following error. I switched the "OEM Unlock" toggle, but i'm guessing that doesn't mean anything until I unlock the bootloader in recovery (which necessitates deleting all the files). I followed the directions on the twrp website which claim that root isn't needed, but I guess unlock is.
Thanks again,
luciant
Click to expand...
Click to collapse
You need to be in recovery for adb to work. The Android with belly open is recovery but you need to unlock it with a button combo. Fastboot won't work unless you unlocked the bootloader.
I may have the steps a little off for getting to recovery but I'm sure searching how to boot to recover for the Nexus 9 will find you the right steps. It's been a long time since I've used the stock recovery on this tablet.
For future bootloopers: Well in the end, I wasn't able to figure out how to pull files using the stock HTC Nexus 9 recovery. Since it was locked, I wasn't able to install or execute TWRP .img , and unlocking it meant losing the files. It was weirdly looping even in Recovery & Fastboot. I tried every mode, and different drivers in the device manager, but ADB couldn't connect. Maybe it's not meant to for security purposes.
If you're bootlooping even in recovery, try the following:
I gave up on trying to recover the data, and decided to just unlock the bootloader. booted to Fastboot (Pwr+Vol Down on start up, select Recovery, Pwr+Vol Up, should say "Fastboot") Then I used fastboot oem unlock, which unlocked the bootloader and Deleted ALL DATA. Then, I could flash TWRP, using fastboot flash recovery twrp.img. Once I flashed TWRP, I booted to twrp recovery using Pwr+Vol Up at boot, wiped all partitions. Then I went to TWRP Advanced -> ADB sideload. Issued adb sideload ota.zip, and this gave me a clean stock install.
Thanks gk for your advice.

Categories

Resources