Hello, recently software break my Xiaomi MI 9 SE, this because when triet to boot to recovery after flashing TWRP give this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And when tried to reboot into recovery dosn't work, this post is because solved this problem took me almost two days so i'm trying to help someone needed
I upload all the files needed for restore your phone and install pixel clean room
Enter to this link: (Send me private to obtain, XDA doesn't let me post any link because i'm a new user... sorry for that)
Inside is necessary to download the file with name "MiFlash.zip", unzip the file and execute the MiFlash.exe
Reboot you phone in bootloader and connect to the pc
Download the file inside de google drive link, with name "grus_eea_global_images_V10.2.9.0.PFBEUXM" this is the factory system proporsionated by xioami, this case is the global flavor
Unzip the content, and in the "MiFlash" program configure the route to the folder previously unziped, with your phone connected proced to install run the program
In this moment, we have restore our phone with the stock room, not my ideal room but solve the principal problem
So, to go forward i install twrp (probed worked) and flash another room and rooting. It's not necesary follow this steps.
Reboot to bootloader the phone and connect to the pc
Download the file "recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img"
Enter inside the folder with the image dowloaded previously
Run the follow command "fastboot flash recovery recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img"
Run the command "fastboot boot recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img" or reboot and go to the recovery
With your phone connected, download the following files ("PixelExperience_Plus_grus-9.0-20190924-1959-OFFICIAL.zip", "Magisk-v20.0.zip" and "fw-vendor_grus_miui_GRUSGlobal_V10.3.4.0.PFBMIXM_1af3c0ea1e_9.0.zip"), copy this files inside the memory of your smartphone.
With TWRP, wipe everything except the internal storage of your phone
Go to flash and install "fw-vendor_grus_miui_GRUSGlobal_V10.3.4.0.PFBMIXM_1af3c0ea1e_9.0.zip"
Flash the following zip file "PixelExperience_Plus_grus-9.0-20190924-1959-OFFICIAL.zip"
Finnaly flash the "Magisk-v20.0.zip"
Reboot your phone and wait, the magic it's happened
Well, finnaly sorry for my bad english, hope this help someone, for me took me almost 2 days to repair my phone.
Bye
walberth said:
Hello, recently software break my Xiaomi MI 9 SE, this because when triet to boot to recovery after flashing TWRP give this message:
And when tried to reboot into recovery dosn't work, this post is because solved this problem took me almost two days so i'm trying to help someone needed
I upload all the files needed for restore your phone and install pixel clean room
Enter to this link: (Send me private to obtain, XDA doesn't let me post any link because i'm a new user... sorry for that)
Inside is necessary to download the file with name "MiFlash.zip", unzip the file and execute the MiFlash.exe
Reboot you phone in bootloader and connect to the pc
Download the file inside de google drive link, with name "grus_eea_global_images_V10.2.9.0.PFBEUXM" this is the factory system proporsionated by xioami, this case is the global flavor
Unzip the content, and in the "MiFlash" program configure the route to the folder previously unziped, with your phone connected proced to install run the program
In this moment, we have restore our phone with the stock room, not my ideal room but solve the principal problem
So, to go forward i install twrp (probed worked) and flash another room and rooting. It's not necesary follow this steps.
Reboot to bootloader the phone and connect to the pc
Download the file "recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img"
Enter inside the folder with the image dowloaded previously
Run the follow command "fastboot flash recovery recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img"
Run the command "fastboot boot recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img" or reboot and go to the recovery
With your phone connected, download the following files ("PixelExperience_Plus_grus-9.0-20190924-1959-OFFICIAL.zip", "Magisk-v20.0.zip" and "fw-vendor_grus_miui_GRUSGlobal_V10.3.4.0.PFBMIXM_1af3c0ea1e_9.0.zip"), copy this files inside the memory of your smartphone.
With TWRP, wipe everything except the internal storage of your phone
Go to flash and install "fw-vendor_grus_miui_GRUSGlobal_V10.3.4.0.PFBMIXM_1af3c0ea1e_9.0.zip"
Flash the following zip file "PixelExperience_Plus_grus-9.0-20190924-1959-OFFICIAL.zip"
Finnaly flash the "Magisk-v20.0.zip"
Reboot your phone and wait, the magic it's happened
Well, finnaly sorry for my bad english, hope this help someone, for me took me almost 2 days to repair my phone.
Bye
Click to expand...
Click to collapse
can we use another rom instead of PixelExperience?
2 things:
1 - I seriously messed up my phone with that twrp. Although I was using a more recent version, I don't recommend it. Use redispade twrp instead
2 - You can and you should use another ROM. PE is dead. Just check vendor required and,if different from the one suggested by OP, flash it instead.
rzki03 said:
can we use another rom instead of PixelExperience?
Click to expand...
Click to collapse
Of course, in the example I use this room and in phome is working with some minor bugs, but @elpaablo say that it's nor longer getting support. I recommend you use another room with active development and support
elpaablo said:
2 things:
1 - I seriously messed up my phone with that twrp. Although I was using a more recent version, I don't recommend it. Use redispade twrp instead
2 - You can and you should use another ROM. PE is dead. Just check vendor required and,if different from the one suggested by OP, flash it instead.
Click to expand...
Click to collapse
Thanks, this twrp is the only that I test and work, but I don't tested the twrd indicated. And thanks for the info about the rom, I will be updated because in this time I experimented some bugs.
Related
Hi there,
I recently got the Homtom HT16 for just 50 bucks. I've always rooted my phones with a one-click rooting app(kingoroot etc.), but it seems not to work. I did some reading and saw you need TWRP to root the device. Now there is no TWRP for the device, saw on xda there was for the HOMTOM HT7.
Anyone knows if I can use the TWRP for the HT7 or is there any other way to root my phone?
Sorry for late response. On Russian forum you may find way to install recovery with Flash tool, however that didn't worked for me. Their TWRP recovery is useful for rooting. This is 100% tested, I own HOMTOM HT 16.
1. Install adb-setup-1.4.3 to enable adb, fastboot and Google USB driver on computer..
https://www.dropbox.com/s/wvsyab1iakpsswu/adb-setup-1.4.3.exe?dl=0
2.Settings-Developer optons Enable USB Debugging and Allow OEM unlocking
3.Put on sd card SuperSU-v2.78-201609011115 (this version worked for me).
https://www.dropbox.com/s/84xm1m7rxerg6kt/SuperSU-v2.78-201609011115.zip?dl=0
4. Turn off the phone, press Power and Volume up. You'll see new menu. Move with Volume up, choose Fastboot and press Volume down. Connect computer and phone with USB cable.
5. Find the directory where adb and fastboot are installed and position itself there . Hold Shift, right-click and choose Open command window here. ( If you are not the administrator, Windows 10 Start, Command Prompt (Admin) and position yourself in directory where fastboot is installed with cd command).
Copy TWRP recovery (recovery.img) in that folder.
https://www.dropbox.com/sh/t26oax8n96izp60/AACq00Cgo1iMFOWPAT8leRXZa?dl=0
5.Type and execute commands:
fastboot devices (check if device if recognized, you'll see the serial number)
fastboot oem unlock (press Volume up to unlock bootloader)
fastboot flash recovery recovery.img (install new recovery on phone)
6.Pull out battery, push it back . Hold Power and Volume up. You'll see new menu. Move with Volume up, select Recovery and press Volume down.
7. Don't make attention to blinking and bad performance of Recovery. Select Install, find SuperSu on sd card and install. If everything is ok, you will see notification that superuser is successfully installed.
8. Reboot phone and check with Root checker application root rights.
(optional) If you need restore factory recovery and remove Superuser, to keep warranty valid.
https://www.dropbox.com/sh/s6dvqr8ge72otfu/AACgOQ7CgrVk94o0_K6ACXtIa?dl=0
Hi, all I received yesterday the z11 max. Install recovery with super your and comborom V6.2 all ok. Problem does not update ota, it tells me no updates. I have made to the wrong? Thank you.
Hi.
After step 6. I could not enter in the new recovery menu. I get some error messages (attached picture) then the phone is restarting. What could be the problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 06:41 PM ---------- Previous post was at 06:34 PM ----------
The image not visible, these are the error message:
'Could not mount /data and unable to find crypto footer'
`Unable to mount storage`
and so one....
pecs72 said:
Hi.
After step 6. I could not enter in the new recovery menu. I get some error messages (attached picture) then the phone is restarting. What could be the problem?
...
and so one....
Click to expand...
Click to collapse
I downloaded the original fw from needrom, then I put back the original recovery.img, so now it's as original, but without root...
I don't know what is the problem, this procedure worked on my phone.
Look here:
https://forum.xda-developers.com/s7-edge/help/twrp-mount-data-unable-to-crypto-footer-t3360331
**** my phone factory resseted it self
No matter what I do, my phone doesn't allow to be found when I make "fastboot devices".
Can someone that have rooted the phone please do a readback of the entire rooted rom and upload for me?
I'm facing a lot of problem installing the recovery , so if someone can please post a rooted rom it'll be useful ...
Edit : can someone backup his nvram partition? I lost my imei and with this phone any trick wont work...
dani the hack said:
Can someone that have rooted the phone please do a readback of the entire rooted rom and upload for me?
I'm facing a lot of problem installing the recovery , so if someone can please post a rooted rom it'll be useful ...
Click to expand...
Click to collapse
Hi, for me the SuperSU from holocen (see above):
togeter with the TWRP image, flashtools v5 and the description from needrom worked for me (not every emailprovider can be used to create an account):
needrom.com/download/homtom-ht16-4/
Greetings Rikski
Solution found in here!!
Use TWRP for cyanogen after installing it with sp tools v5.
Put SuperSU v2.82 or above in the phone or sd memory card go to custom recovery and install the SuperSU v2.82.zip file. Reboot and that's it. It works like a charm. :good:
7. Don't make attention to blinking and bad performance of Recovery. Select Install, find SuperSu on sd card and install. If everything is ok, you will see notification that superuser is successfully installed.
How long does blinking take usually? It blinks all the time, I can't select Install ?!
This phone has now nearly 30 ROMs on needrom.com
Plus a non blinking custom TWRP recovery, go check it out:
needrom.com->Doogee->Homtom->ht16
I tryed to follow the guide of holocen (also used much of external information) but right now i'm stuck in a bootloop.
First of all i needed hours of reading and troubleshooting to get my adb "cmd" working proberly with the "bootloader mode" (cause of a driver problem).
After i was successful ("fastboot devices. fastboot oem bootloader) , i tryed serveral twrp recovery *.img's (officials first, holocen's later on), but i can't get the ht16 out of bootloop. Recovery flashing seems to be successfull though.
If i try "volume up + power" and start up the recovery manually, i got the twrp splashscreen, followed by a huge chunk of red "unable to mount xyz..." with a following bootloop (there are only seconds to see whats happening, an then the "HomTom" splashscreen reappears). I tryed "fastboot erase userdata" with no help. Was insecure about the "fastboot erase system" command though.
Maybe some of you guys are eager to help. I really tryed to read up as much information i could about this topic. I thank you in advance.
Target was to root the phone and to install some kind of lightwight custom rom (just to get rid of those frikk'n "trojans, bloatware-viruses, marketing horrors" which are messing with the stock rom. Hopefully everybodys know right now what i'm talking about).
I try to respond quickly, but i can't garuentee.
Thank you very much for reading.
Best regards
B4dLuck
Hi So basically i unlocked my Huawei P20 Lite's Bootloader and i flashed TWRP and installed a custom ROM it was Pixel Experience and i cannot use WiFi (discovers them but cannot connect) make or receive phone calls/Text messages and also almost every app does not work and when i try to flash the phone back to stock i cannot because FRP is disabled but i when i go to enable it its greyed out and says Bootloader is already unlocked but i cannot flash anything nor can i restore it using himate please help in any way you can.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hola amigo, que recovery TWRP, instalaste y trates de entrar a eRecovery para descargar el ultimo compilado de tu celular atraves de wifi. el descarga y resdtablece automaticamente.
Do you have a Google account logged in in that device? If not, log in and then try again.
I've tried everything I'm not even joking
Robster1121 said:
Hi So basically i unlocked my Huawei P20 Lite's Bootloader and i flashed TWRP and installed a custom ROM it was Pixel Experience and i cannot use WiFi (discovers them but cannot connect) make or receive phone calls/Text messages and also almost every app does not work and when i try to flash the phone back to stock i cannot because FRP is disabled but i when i go to enable it its greyed out and says Bootloader is already unlocked but i cannot flash anything nor can i restore it using himate please help in any way you can.
Click to expand...
Click to collapse
I've tried erecovery and it's signed into my Google account but no word of a lie it won't let me sign out or erase the device also the twrp was the preditorian edition j think it's on one of the Huawei P20 lite threads also if you think you could help could you email me at [email protected]
tried using the erecovery to download and install original firmware?
One way is to try to recover your device using E-Recovery and download the ROM within E-Recovery itself(it will be autoflashed). But e-recovery might fail to download the ROM if your kernel has been changed. In my case, it has failed even though kernel was default kernel. E-Recovery might fail to download if you completely wiped out all partitions. If you completely wiped out all partitions you will find hard time to get back 1 particular partition back i.e. HiSuite package Partition(though you can download from internet), unless you have taken a full nandroid backup or just backup of that partition using twrp.
Now if the above method doesn't work,
The other way to recover is to first download the dload version of the ROM(the links have been provided in another post belonging to P20 lite thread). Instead of 3 files(used in Hurupdated method from Firmware Finder site and app), these links will give you just 2 files. Open them and just extract the *.APP files only. Rename both the files into UPDATE.APP. APP should be in capital letters only if not, just make it in uppercase by yourself. The update.zip will give you some UPDATE.APP which will be around 4 GB and the other one around 1-1.2 GB. The only method by which this will work is to use external SD card. Now if the UPDATE.APP is more than 4 GB then format the ext sd card in NTFS or ex-FAT format. If you dont have sd card adapter then use "AParted" app from play store to do the job. Now copy the first APP file. Keep pressing power and vol up and down buttons together(after switching off your device) till you get the bootloader unlocked warning screen. Now your phone will automatically flash the file and reboot. The process might take around 5-10 mins.
After flashing, your phone will boot successfully. In some cases after flashing, you will get a warning that some serious problems have occurred(but after a successful flashing). It will ask you to completely wipe the device. Just wipe it and then it will reboot just like a new phone asking you to sign for gmail details etc etc(you can skip them if you want). But still flashing is not complete. Now you need to repeat the process with the smaller APP file(after renaming it to UPDATE.APP), but now no need to wipe the device.
Voila!! Your phone is in a working condition now. But bootloader will be locked again. But you can unlock it again by enabling OEM unlock settings and then under fastboot(which again will factory reset your device) and use Magisk for your enjoyment.
In case you are not getting the dload version of the ROM of the desired variant( i.e. C432 or C675 or whichever you want), there is one paid site to get that. Google "easy-firmware" for that. Huawei P20 lite dload ROMs are available in that site. You might have to pay 15 $ for 40 GB downloads from that site. In case you dont want to pay, then you just need extra high speed data because you have to download a lot of files. So if your ROM is not available for download and you have to use a different variant ROM then after flashing with the different variant ROM and unlocking the bootloader, use HwOTA to rebrand your phone to the correct variant and then use Hurupdate to flash the final ROM(this time you have to download the 3 zip files from Firmware Finder and rename according to the tutorial).
I hope this helps you out from the doldrums
This is the Xiaomi Mi 9's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Is it possible to unlock the bootloader immediately with that tool or does it use the Xiaomi unlock process (second case probably, right )
TobiPeter said:
Is it possible to unlock the bootloader immediately with that tool or does it use the Xiaomi unlock process (second case probably, right )
Click to expand...
Click to collapse
You can't unlock the bootloader directly with this tool
Many thanks for this great tool ?????
5€ Donation is send out
Thanks for supporting MI9 :good: :good: :good: :good:
mauronofrio said:
This is the Xiaomi Mi 9's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Click to expand...
Click to collapse
mauronofrio said:
You can't unlock the bootloader directly with this tool
Click to expand...
Click to collapse
@mauronofrio sorry if ask you but i need help i'm new with xiaomi phone and tool flash tool and all the rest , so if i flash a rom with this tool all in one using global flash rom and save my data will be a problem?? i have global rom mi9 with your twrp and magisik installed with root, please let me know tanks
Thanks for share
my hard disk was dead...and lost some driver and tool
ALl in One, let me save a lot of time
Hi, I would like to update to the latest xiaomi.eu (android q), I currently installed the TWRP (LR team 3.3.0-0523), I would go to Mauro's .41 ... I would not run into bootloop and brick problems (reading there are several cases) .. using this tool, can I feel comfortable? or is it better to proceed via fastboot? grazie mille
I would like to know, how to use this tool to flash device. Should I boot the device in fastboot mode, then connect the tool to flash it?
Gnahznuy said:
I would like to know, how to use this tool to flash device. Should I boot the device in fastboot mode, then connect the tool to flash it?
Click to expand...
Click to collapse
You can connect the device powered on on in fastboot mode, the important thing is that debug usb is enabled. The tool will eventually tell you that the mode is not good for what you want to do
mauronofrio said:
You can connect the device powered on on in fastboot mode, the important thing is that debug usb is enabled. The tool will eventually tell you that the mode is not good for what you want to do
Click to expand...
Click to collapse
I did everything and connected to the tool looks everything is fine, after it I flash factory images, the pop out other screen to input the ROM, then click flash ROM then nothing happen. No respond at all..
I am planning to flash TWRP on my Mi 8 but I get a warning message saying if I don't root afterwards, my device will be bricked. Is this holding true? I want to keep my stock ROM and no root.
This tool is stale and not working anymore.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.3.1 & Root for Motorola One Zoom
© Attention! Creation of mirrors for downloading, distribution on other resources without coordination with the authors banned! ©
Fixed problem of not working touch!
Thanks to the efforts of mauronofrio , yuri-2016 and and my humble contribution, the TWRP 3.3.1 was made from scratch and a new method of Root was tested.
This is a universal method that will fit all modifications of Motorola One Zoom.
READ OBLIGATORY !!!
Warning! You are responsible for your own actions with the phone.
100% guaranteed operation of this method is tested on clean firmware installed in standard way via fastboot (system in Slot A).
The phone should have USB debugging enabled and bootloader unlocked!
All your user data will be deleted during TWRP installation process!
Instructions
1. Download the following files:
- Download current version of twrp-3.3.1-6-parker-mauronofrio.img (copy to C:\adb\ folder) and archive twrp-3.3.1-6-parker-installer-mauronofrio.zip (copy to external SD Card) ;
- archive for Magisk installation (copy to external SD Card) https://github.com/topjohnwu/Magisk (latest version for today Magisk v20.4);
- archive to disable dm-verity and forceencrypt Disable_Dm-Verity_ForceEncrypt (copy to external SD Card) https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 (latest version for today Disable_Dm-Verity_ForceEncrypt_03.04.2020 https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip );
2. Boot the phone in fastboot mode, connect it to a PC and perform the following commands:
Code:
fastboot boot C:\adb\twrp-3.3.1-6-parker-mauronofrio.img
3. After rebooting in the TWRP give permission by doing Swipe to Allow Modifications.
4. Go to the "Install" section. Click on "Select Storage" button, select Micro SD card, OK. Choose twrp-3.3.1-6-parker-installer-mauronofrio.zip and "Swipe to confirm Flash".
5. Go to "Wipe" section and press "Format data" for decryption. Type "Yes" on request. Go to the TWRP Main Menu and reboot again in the Recovery. Give permission by doing Swipe to Allow Modifications.
6. Go to the "Install" section. Click on "Select Storage" button, select Micro SD card, OK. Choose and install sequentially: archive for installation Magisk, archive Disable_Dm-Verity_ForceEncrypt.
7. Reboot into the System.
8. Fully go through the initial settings, enable Developer Mode and USB debugging.
9. Reboot into the bootloader and again in TWRP.
10. Make settings TWRP - adjust time, a time zone, brightness of the display, language.
11. Reboot into the system.
Congratulation! Your device now has a TWRP and Root!
Attention, it's important! If you have problems with a broken WiFi and mobile network after install TWRP, install directly in TWRP boot.img the same stock firmware version that is currently installed on phone and then install TWRP-installer.
great job!!!
It's great to see some development in our forums! Great job
domi.nos said:
It's great to see some development in our forums! Great job
Click to expand...
Click to collapse
All work was done on the phone purchased in Poland :highfive:
Now, thanks to talented people, we're working on fixing the problem with the touch.
Added absolutely new TWRP, fixed problem of not working touch, redesigned installation manual. Enjoy!
thank you for your support, you're brilliant!!!
after doing the whole process, the cell phone does not work the wifi or the mobile network
spcarlos2 said:
after doing the whole process, the cell phone does not work the wifi or the mobile network
Click to expand...
Click to collapse
Phone for which region? What kind of firmware is it installed? Have you booted TWRP or flashed it?
ilia3367 said:
Phone for which region? What kind of firmware is it installed? Have you booted TWRP or flashed it?
Click to expand...
Click to collapse
Colombia
Modelo XT2010-1
Hardware pvt
I did as it appears in the instructions
Hi, I tried but when I perform the command don't let me continue, it says "the archive don't exist" something like that, I need help please...
spcarlos2 said:
Colombia
Modelo XT2010-1
Hardware pvt
I did as it appears in the instructions
Click to expand...
Click to collapse
did you got it to work again? I got the exact same problem
Just bought a US version XT2010-1. Stock ROM Android 9 with newest security updates (just downloaded all of them). Build PPHS29.59-49-8. I unlocked the bootloader already
Can anyone confirm this process works and all phone functions will work (cell and WiFi) if I follow all the instructions as written?
To clarify, this is a brand new phone with stock firmware. The only changes I made were updating security patches and unlocking the bootloader. Haven't even set up Google account on phone yet.
Thanks
jacky1241 said:
did you got it to work again? I got the exact same problem
Click to expand...
Click to collapse
Did you get your phone to work with this method? I have a brand new phone want to root it but don't want to F it up.
If you have problems with WiFi and mobile network after downloading to TWRP, install boot.img of stock firmware and then install TWRP-installer.
But there shouldn't actually be any such problems.
TWRP should fit all models.
TWRP isn't installed, it's loaded.
ilia3367 said:
If you have problems with WiFi and mobile network after downloading to TWRP, install boot.img of stock firmware and then install TWRP-installer.
But there shouldn't actually be any such problems.
TWRP should fit all models.
TWRP isn't installed, it's loaded.
Click to expand...
Click to collapse
Thanks. I'm going to give it a shot.
Sort of a noob. I've rooted 2 phones before but used a pre-made script on one and used TWRP on my Moto G4 with a custom ROM.
Where do I get stock boot.img if I need i?. I saw multiple posts on different forums about "extract the boot.img" but I don't know where to extract it from. Sorry to bother you. Thanks for your work on this.
FL-Guy said:
Where do I get stock boot.img if I need i?.
Click to expand...
Click to collapse
From the archive of the stock firmware. The same firmware version that is currently installed on your phone.
Worked!
Followed all the instructions as written and BAM! I have TWRP recovery and rooted phone.
You da man. Thanks!!!
Finally the TWRP website has an official Recovery Page for Motorola One Zoom! https://twrp.me/motorola/motorolaonezoom.html
Hopefully soon we will see TWRP itself.
There is an official TWRP !!!
Fist let me thank you for helped me successfully rooted this phone before https://forum.xda-developers.com/t/what-is-the-easiest-and-safest-way-to-root-redmi-note-10.4359843
But now some of my bank applications just refuse to run and magisk hide doesn't help and my first objective to root is not needed anymore plus some more inconvenient things from bugs now I want to go back to official MIUI ROM how can i do that?
There are plenty of guides show how to Install the custom ROM but i can't find one about go back the original.
Unlike the last time now i known the basic of recovery, flash, fastboot etc
But i still don't know how to "Completely" go back to the original MIUI ROM but also want to keep the OrageFox recovery just the ROM.
Can i just download the MIUI ROM from here https://xiaomifirmwareupdater.com/miui/mojito/stable/V12.5.4.0.RKGMIXM/ and flash the .zip file normally? But what about Recovery/Fastboot type? The fastboot type is twice as big as the recovery type but it's not the zip format guess i don't need that and stick to recovery/zip format right?
And what is Frimware https://xiaomifirmwareupdater.com/firmware/mojito/stable/V12.5.5.0.RKGMIXM/ do i also need to flash this too?
I'm currently on OrangeFox recovery and Sakura ROM (https://projectsakura.xyz/download.html)
Thank you.
You can't flash recovery miui with twrp/orangefox... in order to reinstall the Stock ROM you must flash the Fastboot ROM through MiFlash Tool... Firmware is not needed.
1- Download this MiFlash version : MiFlash 20210226
2- Download the v12.5.4 Fastboot ROM from Xiaomi Firmware Updater and unzip it
3- Install Drivers if needed
4- Select "Clean All" as you don't want to lock the bootloader to keep OrangeFox and start flashing
5- Wait for MIUI Boot
6- Reboot to Fastboot and flash PE Recovery or boot TWRP
7- Flash OrangeFox Zip
8- Done , you have Stock MIUI with OrangeFox
i hope this can help you , Cheers
alonsoj636 said:
You can't flash recovery miui with twrp/orangefox... in order to reinstall the Stock ROM you must flash the Fastboot ROM through MiFlash Tool... Firmware is not needed.
1- Download this MiFlash version : MiFlash 20210226
2- Download the v12.5.4 Fastboot ROM from Xiaomi Firmware Updater and unzip it
3- Install Drivers if needed
4- Select "Clean All" as you don't want to lock the bootloader to keep OrangeFox and start flashing
5- Wait for MIUI Boot
6- Reboot to Fastboot and flash PE Recovery or boot TWRP
7- Flash OrangeFox Zip
8- Done , you have Stock MIUI with OrangeFox
i hope this can help you , Cheers
Click to expand...
Click to collapse
Hi, After i select clean all/clean all and lock this message popup i assume it can't find the ROM file right?
But i make sure to put the downloaded ROM is there but the file format is .tgz is that the case? If not how can i fix this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lolitary said:
Hi, After i select clean all/clean all and lock this message popup i assume it can't find the ROM file right?
But i make sure to put the downloaded ROM is there but the file format is .tgz is that the case? If not how can i fix this?
View attachment 5525005
Click to expand...
Click to collapse
you must unzip the .tgz file and write the path to the ROM into the bar above... example : Desktop/RN10/mojito_global_12.5.4.....
Note : Don't use Clean all and lock otherwise your bootloader will be locked and you will have to unlock it again in order to flash another custom recovery
alonsoj636 said:
you must unzip the .tgz file and write the path to the ROM into the bar above... example : Desktop/RN10/mojito_global_12.5.4.....
Note : Don't use Clean all and lock otherwise your bootloader will be locked and you will have to unlock it again in order to flash another custom recovery
Click to expand...
Click to collapse
Thank you so much now i'm back to the original MIUI ROM.
Now i'm just curios if this flash tool also clean my root folder or not since my root folder kinda mess from my trial and errors and it take up quite amount of disk space and my phone storage show as 29.1GB/128GB after clean flashed. But its not a big problem i can live with it.
Lolitary said:
Thank you so much now i'm back to the original MIUI ROM.
Now i'm just curios if this flash tool also clean my root folder or not since my root folder kinda mess from my trial and errors and it take up quite amount of disk space and my phone storage show as 29.1GB/128GB after clean flashed. But its not a big problem i can live with it.
Click to expand...
Click to collapse
Yes , MiFlash clean everything... can u kindly share screenshot from About Phone > Storage? 29.1GB seems too much space for a fresh MIUI installation ...
alonsoj636 said:
Yes , MiFlash clean everything... can u kindly share screenshot from About Phone > Storage? 29.1GB seems too much space for a fresh MIUI installation ...
Click to expand...
Click to collapse
This is after i uninstalled all the bloatware and updated all the system apps
Lolitary said:
This is after i uninstalled all the bloatware and updated all the system apps
Click to expand...
Click to collapse
this is mine , 64GB model... it should be 20-25 GB after all updates... i think yours is fine