I got a G925A that was stuck on ATT logo, i reloaded the SW (PJ1) on it, and its still stuck on the att logo, then i did a wipe, and cache wipe on it. Now it boots to android is starting, but its stuck on that screen for 30 minutes, so i hold the volume down and power again, but now it gets stuck on ATT screen again. So I feel like there is something wrong with it, on the system status it says custom, even after i reloaded the software.
truwrxtacy said:
I got a G925A that was stuck on ATT logo, i reloaded the SW (PJ1) on it, and its still stuck on the att logo, then i did a wipe, and cache wipe on it. Now it boots to android is starting, but its stuck on that screen for 30 minutes, so i hold the volume down and power again, but now it gets stuck on ATT screen again. So I feel like there is something wrong with it, on the system status it says custom, even after i reloaded the software.
Click to expand...
Click to collapse
http://downloadmirror.co/Urj/G925AUCS5DPJ1.zip
Try to download and Reflash this. After boot to recovery and do full wipe
callumbr1 said:
http://downloadmirror.co/Urj/G925AUCS5DPJ1.zip
Try to download and Reflash this. After boot to recovery and do full wipe
Click to expand...
Click to collapse
thats what i had originally put into the phone when i did the sw reload, didn't work
truwrxtacy said:
thats what i had originally put into the phone when i did the sw reload, didn't work
Click to expand...
Click to collapse
How did you do it? How did you flash it?
Related
So. I was on 1.4a of CherryBlur. Flashed the newest FULL WIPE with Webtop version 1.4d. Flashed using Tenfar's Recovery and it said flashing was successful. Now, when I turn the phone on, at the motorola logo screen, with "Dual Core Technology" below it, the screen starts flashing after a few seconds (about 20 seconds) and the white "Unlocked" in the top left of the screen is gone during the flashing. What the hell? I can still get into the recovery mode, but none of the options seem to help my problem, even the factory reset.
And a battery pull is the only way to get the screen to stop blinking and restart.
Any ideas? Could the download have been incomplete/corrupted?
Err0xx said:
So. I was on 1.4a of CherryBlur. Flashed the newest FULL WIPE with Webtop version 1.4d. Flashed using Tenfar's Recovery and it said flashing was successful. Now, when I turn the phone on, at the motorola logo screen, with "Dual Core Technology" below it, the screen starts flashing after a few seconds (about 20 seconds) and the white "Unlocked" in the top left of the screen is gone during the flashing. What the hell? I can still get into the recovery mode, but none of the options seem to help my problem, even the factory reset.
And a battery pull is the only way to get the screen to stop blinking and restart.
Any ideas? Could the download have been incomplete/corrupted?
Click to expand...
Click to collapse
Hold the volume down while the phone keeps restarting. Then try to enter recovery and do a wipe.
Ps: are you on tenfars cwm or rom managers cwm? Only tenfars cwm wipes data.
Sent from my MB860 using XDA Premium App
Aye. On Tenfar's and wipe did nothing for me.
Boot into recovery and reflash Cherryblur. Sounds like your other rom you downloaded didnt finish or is corrupted.
As unbelievable as it may sound, tried this. Have 3 different versions of CherryBlur saved on my SD Card. tried reflashing the newest version (1.4d FULL WIPE) about 5 times and even tried older versions (back to 1.2) out of desperation. All result in this same hang at the motorola screen. This is one of the most amazing things that I've seen. Something buggered royally.
i just woke up to find my galaxy s3 dead.
i tried to power it on, to have the "galaxy s3 i9300" logo starts to blink in a continuous way and no matter what i do the blinking continues in an infinite loop, till i remove the battery and power it on again and same loop of logo blinking again
i did access recovery, change recovery--> same loop
i did install original firmware through download mode that i can also access (via Oddin) --> same loop
i tried to install original firmware by different components methods (via Oddin) but IT FAILED.
i tried philz touch 4 recovery and it works like a charm with back up and restore -> same loop
so, what is the problem and how can i turn around it.
factory reset
Glebun said:
factory reset
Click to expand...
Click to collapse
done, but same blinking bootloop
boot to recovery
wipe data, cache and dalvik
reboot to download mode
flash stock rom.
i might be wrong, but worth a try.
magma2000 said:
done, but same blinking bootloop
Click to expand...
Click to collapse
Superwipe ... put factory rom on there odin and start from scratcg to root then unlock bootloader then flash happy.
Sent From *SynergyRom
It's sds mate get in touch with your provider and they should replace mainboard for you
stupidly will be met by sarcasm
Hey guys,
I just upgraded to Revolution HD 32.0 (coming from 31.0).
Here's what i did.
Boot into recovery.
Clear cache+dalvic-cache.
Install zip from sd-card (select revolution hd 32.0)
Started Aroma installer, left everything pretty much default, just removed some of the samsung junk.
After the install was finished i cleared the cache again and rebooted the device.
It started with the start up logo and after a minute or so "Android upgrading..." with the applications counting.
After that it shows "Finishing boot"
Then nothing, it stays at that for like 5 minutes, then reboots and stays stuck at the samsung logo.
So i decided to boot into recovery, whipe caches and fix permissions and reboot again.
Same thing happened as before.
So i wanted to do a full clean install of the rom, wiping all userdata.
Surprise! Can't get into recovery or download mode anymore.
Took out battery for a few minutes and put it back in.
Still can't access download mode or recovery with vol+menu+pwr...
Does anyone know what's going on, or better, how i can possibly fix this?
I have no idea how to access my device now to make changes...
Thanks a lot!
If you can't get into bootloader with vol down, home and power button then you have a brick, service centre repair required.
Worth trying a USB repair jig to get download before paying for a repair .
jje
Phone took a dump today. Was fine, then shut down, then wouldn't boot past boot screen. Enter safestrap, wipe all, no boot. Odin to stock mj9, no boot. Factory reset after doing in stock recovery, no go. After Odin the phone will get to the Verizon splash screen then shut down. Subsequent attempts to boot after that will not make it past the Samsung logo. It doesn't stick there, it just shut off. Odin completes succesfully. Any ideas?
vlx600d said:
Phone took a dump today. Was fine, then shut down, then wouldn't boot past boot screen. Enter safestrap, wipe all, no boot. Odin to stock mj9, no boot. Factory reset after doing in stock recovery, no go. After Odin the phone will get to the Verizon splash screen then shut down. Subsequent attempts to boot after that will not make it past the Samsung logo. It doesn't stick there, it just shut off. Odin completes succesfully. Any ideas?
Click to expand...
Click to collapse
Sounds like a partition curroption..Have you tried using Heimidall and flashing each image separately?
Also, you might want to bring it Verizon tell them it won't turn on..
But you can try what I suggested above..
i had my amaze repaired (power IC, bad data cable caused it to not charge or even boot up or go in bootloader). Now within 30 seconds off booting up it used to restart. and i cant get into the recovery( shows logo and powers off when going into recovery from bootloader). i cleared the cache from bootloader and its now stuck at boot animation( not boot logo) and wont boot completely. before clearing cache after logo it used to show 4ext recovery boot screen then screen off, now it just shows logo and screen off. really need help i got this phone fixed after 1 year. im s-off and running any 4.4.4 rom (dont remember which rom, i think pacman rom)
so basically i can get into bootloader and use fastboot commands (no adb, authorized device). cant do anything else on the phone. is there a way to fix the phone?
Arsalanzahoor said:
i had my amaze repaired (power IC, bad data cable caused it to not charge or even boot up or go in bootloader). Now within 30 seconds off booting up it used to restart. and i cant get into the recovery( shows logo and powers off when going into recovery from bootloader). i cleared the cache from bootloader and its now stuck at boot animation( not boot logo) and wont boot completely. before clearing cache after logo it used to show 4ext recovery boot screen then screen off, now it just shows logo and screen off. really need help i got this phone fixed after 1 year. im s-off and running any 4.4.4 rom (dont remember which rom, i think pacman rom)
so basically i can get into bootloader and use fastboot commands (no adb, authorized device). cant do anything else on the phone. is there a way to fix the phone?
Click to expand...
Click to collapse
reflashed recovery for the 4th time and it worked. it said the cache partition is corrupt. formatted it. phone works now. updating apps caused system ui stopped working error. going to flash other roms.
Arsalanzahoor said:
reflashed recovery for the 4th time and it worked. it said the cache partition is corrupt. formatted it. phone works now. updating apps caused system ui stopped working error. going to flash other roms.
Click to expand...
Click to collapse
Glad you got your phone working--your persistence paid off.
Be sure to make a backup before flashing other ROM's.