Downloaded the full b380 update but everytime I try to install it using power+2volume button method it says software install failed at around 5%
Am I missing something obvious?
spix123 said:
Downloaded the full b380 update but everytime I try to install it using power+2volume button method it says software install failed at around 5%
Am I missing something obvious?
Click to expand...
Click to collapse
What is your CUST and which Cust are you trying to install?
to clarify .
go settings > about phone . Custom or build No u have for now .
have you tried downloading again manually,and flashing it??
spix123 said:
Downloaded the full b380 update but everytime I try to install it using power+2volume button method it says software install failed at around 5%
Am I missing something obvious?
Click to expand...
Click to collapse
Goto settings
Storage
Set sdcard as default storage
Copy the update.app to dload folder in sdcard
Now try the same volume trigger .
Sent from my KIW-L22 using Tapatalk
Related
Hello. I am getting this error when installing rom "bad zip file" then the installation stops. Please help or I will use something like Odin to install my Rom.
Sent from my HTC Explorer A310e using XDA
ri123 said:
Hello. I am getting this error when installing rom "bad zip file" then the installation stops. Please help or I will use something like Odin to install my Rom.
Sent from my HTC Explorer A310e using XDA
Click to expand...
Click to collapse
Does it happen with every rom or did u try just with one rom
Try downloading the zip again.
errors do happens when downloading.
or it maybe packed wrong from the start see if theres mirrors.
robogoflow said:
Try downloading the zip again.
errors do happens when downloading.
or it maybe packed wrong from the start see if theres mirrors.
Click to expand...
Click to collapse
Just wait a sec
What do you mean with downloading
where do u try to flash the rom
via recovery odin or adb?
In general those error messages appear if there went something wrong with the signing procedure
this often happens with custom roms
Chances are a bad download, as above re download and try again before doing anything else
jiffer1991 said:
Just wait a sec
What do you mean with downloading
where do u try to flash the rom
via recovery odin or adb?
In general those error messages appear if there went something wrong with the signing procedure
this often happens with custom roms
Click to expand...
Click to collapse
I'm flashing via recovery. How should I flash with fastboot or adb?
Sent from my HTC Explorer A310e using XDA
jiffer1991 said:
Does it happen with every rom or did u try just with one rom
Click to expand...
Click to collapse
Every zip file downloaded from my computer.
Sent from my HTC Explorer A310e using XDA
robogoflow said:
Try downloading the zip again.
errors do happens when downloading.
or it maybe packed wrong from the start see if theres mirrors.
Click to expand...
Click to collapse
Zip files compressed from my phone work.
What are "mirrors".
Sent from my HTC Explorer A310e using XDA
Every zip from my computer does not work! I wonder if there is some kind of unusual encoding which zip files have?
What do you want to do??
are u flashing zip in ur recovery??
if yes!
you should follow this.
in your flashing Menu
you to option in there
*Flash Zip
*Toggle signature verification
Just click first To "Toggle signature verification"
after that try to flash again the zip files.
I hope it works.
Press Thanks if i Help
n1ck018 said:
What do you want to do??
are u flashing zip in ur recovery??
if yes!
you should follow this.
in your flashing Menu
you to option in there
*Flash Zip
*Toggle signature verification
Just click first To "Toggle signature verification"
after that try to flash again the zip files.
I hope it works.
Press Thanks if i Help
Click to expand...
Click to collapse
The zip file isn't recognized by the Rom I am using or recovery. I guess I should flash a Rom with fastboot: fastboot flash zip rom.zip.
I don't get it! I have flashed a stock Rom and these errors appear out of nowhere!? I guess I may have to format my sdcard.
Could it be a problem with sdcard partitioning?
ri123 said:
Could it be a problem with sdcard partitioning?
Click to expand...
Click to collapse
hmm might be if u partioned it....
try to use a new sd card as u mentioned
but without any partions...just leave it on factory status and put the zip on it afterwards try it again
ri123 said:
The zip file isn't recognized by the Rom I am using or recovery. I guess I should flash a Rom with fastboot: fastboot flash zip rom.zip.
Click to expand...
Click to collapse
How am I meant to return to stock now?
I have voided my warranty with HTCDev and now I can't use any ruu's at all, in case it does not work and my phone gets messed up.
I just had the same error... formating 3 different SD cards didn't work.
I couldn't do restore.
I couldn't use the rom I had installed a few month ago
It didn't make a difference the zip was downloaded by Internet Explorer or Chrome
Solution:The minute I installed a new version (i guess re-installing would work as well) of CWM it stopped giving that error.
no luck
No luck... Nothing works from here... I still get cant open (rom name) zip (bad) ... Any other advices?
I am v6 supercharged and i have riskey kernel 1.5 with stock rom. And btw samsung galaxy pocket
problem with my gti9500 exynos
hi..i have problem to flash my gti9500 with odin....i dont have recovery mode (when i pust vol up+home+power it goes to screen downloading) but i manage to go to download mode (odin mode)[volume down+home+power] my problem when i flash with odin it stuck at initialization and sometimes setup connection. i try to flash with kies but its say gt-i9500 not support initialization. help i stuck now dont know what to do. even when i try flash cwm recovery using odin its also stuck at initialization. any idea?
Browser
ri123 said:
Hello. I am getting this error when installing rom "bad zip file" then the installation stops. Please help or I will use something like Odin to install my Rom.
Sent from my HTC Explorer A310e using XDA
Click to expand...
Click to collapse
What browser did you use? Try a different browser, maybe it might help, because i've been frustated with this error and then i tried to download it with a different browser and, voila, nailed it
Hi
I get a eror message while installing the official rom in Infosys m370i please help
System/CDA/items/bouble/bouble.apk has unexpected element
today I tried for the first time to root and install a ROM ( i'm not a newb), after flashing the SDE I start flashing the ROM but when I restarted I got a bootloop. I tried to fix It going back to the official firmware but when I press "Update Firmware" I got "Error Code 207", I don't know what to do I tried several times with no result.
Any idea?
Sorry for my bad English
Svradi said:
today I tried for the first time to root and install a ROM ( i'm not a newb), after flashing the SDE I start flashing the ROM but when I restarted I got a bootloop. I tried to fix It going back to the official firmware but when I press "Update Firmware" I got "Error Code 207", I don't know what to do I tried several times with no result.
Any idea?
Sorry for my bad English
Click to expand...
Click to collapse
Hi,
Go to recovery->Plug device to PC by USB-> Format System-> Reformat. After that tablet mount recovery disc on PC and You must put *.aos file to this disc. After flash, tablet will start load new FW.
freezenook said:
Hi,
Go to recovery->Plug device to PC by USB-> Format System-> Reformat. After that tablet mount recovery disc on PC and You must put *.aos file to this disc. After flash, tablet will start load new FW.
Click to expand...
Click to collapse
I have done this before without result. Now I'm trying to uninstall the SDE and update without It, maybe the problem is SDE
aos firmware
Svradi said:
I have done this before without result. Now I'm trying to uninstall the SDE and update without It, maybe the problem is SDE
Click to expand...
Click to collapse
You have to use the same version firmware (or newer) that you had installed, older version won't install.
stevemp said:
You have to use the same version firmware (or newer) that you had installed, older version won't install.
Click to expand...
Click to collapse
yes, I have the latest.
Now after I uninstalled the sde, looks like it works. I'm installing the official firmware.
Recently i got a softwre update(43.68 Mb) on my stock rooted Galaxy S Duos s7562. after I have downloaded the update it asked to update now or later.. when accepted to install now, It swittched off and opened in cwm recovery and said failed to verify signature of file.. istallation aborted.
-in which I disabled signature verification.. but after a few sec "signature check disabled" msg pops up..
does it mean I can flash the update file manually after moving it from ( /cache/ ) to my sdcard?? or it will cause any problem???
help guys!
The ota wont install because you have a custom recovery. Try to flash a stock recovery back and take the ota again.
Sent from my Nexus 4 using XDA Free mobile app
lolcakes203 said:
The ota wont install because you have a custom recovery. Try to flash a stock recovery back and take the ota again.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
That I can figure but signature check is disabled then why not installing.. and Can I just take the downloaded OTA update from /cache/ and install it in recovery?
I think you can, but if you can download the ota from xda and then move the zip over to the sd card that would be best. Also, I think the zip verification has to do with md5 hashes, and not with whether or not the ota will install. It may also be failing because of your modified system.
Sent from my Nexus 4 using XDA Free mobile app
You could always stick the OTA on your hard drive from /cache/ and use adb sideload <file>
Hey everyone,
I'm in a desperate hurry now, after hours of trying to get an operational phone again.
I have a Sprint Galaxy S3 that I was trying to put CM10.2 on using twrp, but I kept getting the error "Error executing updater binary in zip". HOWEVER, during the process of trying to get it to work, I accidentally did a wipe of my internal storage as well-- wiping my os. Now, all im trying to do is get a working rom so that I can start over, but every rom I try to install using twrp gives me the same error. Can anyone help me get a working OS again??? I can still boot to twrp, but it's not allowing any installation of any OS.
Thanks
What version of TWRP are you using? You might need to update to a newer version. If you are really stuck, then you can restock with Odin and redo the recovery/rom/etc.
Try to replace updater binary in zip with another version. Try to use stock rom binary
es0tericcha0s said:
What version of TWRP are you using? You might need to update to a newer version. If you are really stuck, then you can restock with Odin and redo the recovery/rom/etc.
Click to expand...
Click to collapse
I'm using TWRP v2.7.1.0
I have no idea how to update a binary.
If you are wanting to stick with CM10.2 over CM11, then try one of the older TWRPs like 2.6.3.0. Or download the CM11 zip for your phone and use 7zip to open as archive and you can grab the binary in the folder META-INF > com > google > android > update-binary from it and move it to the other zip in the same spot. Make sure to open as archive because if you unzip, it will break the zip's signature and not flash correctly either.
es0tericcha0s said:
If you are wanting to stick with CM10.2 over CM11, then try one of the older TWRPs like 2.6.3.0. Or download the CM11 zip for your phone and use 7zip to open as archive and you can grab the binary in the folder META-INF > com > google > android > update-binary from it and move it to the other zip in the same spot. Make sure to open as archive because if you unzip, it will break the zip's signature and not flash correctly either.
Click to expand...
Click to collapse
Ok, so I've found the binary you were talking about. What do I change? The error that I currently get (like many other threads that address a similar issue, but not this particular one) is "Error executing updater binary in zip '/external_sd/cm-11-20140210-SNAPSHOT-M3-d2spr.zip'"
At this point, can you tell me how to reset to factory? I think I could accomplish what I'm going for if i could get back to factory again.
masterdudeness said:
I'm using TWRP v2.7.1.0
I have no idea how to update a binary.
Click to expand...
Click to collapse
Ok I've had no phone for 3 days now. I just want to factory reset. I have a U.S. Sprint Galaxy s3. I can boot to download mode and that's about it. What files do I need to put into odin to get this flashed to stock?? Could you provide links also?
masterdudeness said:
Ok I've had no phone for 3 days now. I just want to factory reset. I have a U.S. Sprint Galaxy s3. I can boot to download mode and that's about it. What files do I need to put into odin to get this flashed to stock?? Could you provide links also?
Click to expand...
Click to collapse
Follow this guide - http://forum.xda-developers.com/showthread.php?t=2565972
Hi, I have a big problem, after many changes (build.prop, xposed etc.) I decide o make a Wipe Factory default. When the Wipe was over and i tried to use the phone, I have a message "com.android,phone" Stop, and I can use my phone, Im trying to install the original rom in the recovery but fails every time, someone can help me?
Thanks!
Oscar
Do you have TWRP? Maybe you can try this.
I have the Chinese version Mt2.l05...
ScoobSTi said:
Do you have TWRP? Maybe you can try this.
Click to expand...
Click to collapse
Use usb OTG or sd cardc for stock rom installation via dload method
Thanks
And how can i do these?, I've already dowload the rom, but I couldnt install in the recovery, because this file is designed to update in to the settings menu, but I cant use any menu...
janrck said:
And how can i do these?, I've already dowload the rom, but I couldnt install in the recovery, because this file is designed to update in to the settings menu, but I cant use any menu...
Click to expand...
Click to collapse
Download the full firmware, place it on an sd card. Turn on the phone while holding both the volume up and down button.
Finally i used the dload method and it works! Thx malik!
No problem mate .
Always there to help.