When i plug my phone to my cars radio via USB, the phone starts glitching(It lags, freezes, tops charging then starts again), until i remove the connection.
Why does this happen? I can't listen to music in my car then?
exonerare said:
When i plug my phone to my cars radio via USB, the phone starts glitching(It lags, freezes, tops charging then starts again), until i remove the connection.
Why does this happen? I can't listen to music in my car then?
Click to expand...
Click to collapse
hi exonerare,
any news about your issue?
i have gltches in my RN3, dont know what to do about it.
before that i had freezes and reboots, but now only glitches.
in my case not involved in connecting it to the car radio.
Use a different and a Good quality usb cable and a charger...like a Samsung Charger or something,dont use cheap ones.
For me,stock charger works perfectly but when i use cheap charger, the glitch happens.
It usually happens due to this.
TechNova said:
Use a different and a Good quality usb cable and a charger...like a Samsung Charger or something,dont use cheap ones.
For me,stock charger works perfectly but when i use cheap charger, the glitch happens.
It usually happens due to this.
Click to expand...
Click to collapse
i try to understand the connection between Charger and Glitches.
the glitches happens when i am not connected to any USB/Charger.
the Battery is 100% full !!!
what exactly the connection to a USB/Charger ???
thanks !
iTaisHi said:
i try to understand the connection between Charger and Glitches.
the glitches happens when i am not connected to any USB/Charger.
the Battery is 100% full !!!
what exactly the connection to a USB/Charger ???
thanks !
Click to expand...
Click to collapse
The connection between usb port of charger and the usb end of the wire, and between microusb port of device and microusb end of the wire....any one of that is causing troubles.
This is completely normal to FACE DURING charging..
But if u aren't connected to charger,then that's strange.
Try reflashing the whole miui fw via edl,
if that doesnt solve the issue, then probably it's something related to hardware, head on to service center then.....
Related
Hello, i am new to xda-developers, so please have patience with me
I was using my original usb cable to charge my phone from my laptop. But one day some strange things started to happen, when my phone's battery was completely depleted i connected the usb and phone started turning on and off very often and I wasn't able to charge it even a bit. When connected to wall socket charger everything seems to be fine, it's charging.
But now the usb is not working, neither computer sees it (before i used it), i used other cables, no good. Now it's original ginderbread ROM, maybe i should reinstall it, but i can't do anything since usb is not working in any way.
Maybe someone of you had similar problems and know how to solve it?
Thanks in advance!
supelis said:
Hello, i am new to xda-developers, so please have patience with me
I was using my original usb cable to charge my phone from my laptop. But one day some strange things started to happen, when my phone's battery was completely depleted i connected the usb and phone started turning on and off very often and I wasn't able to charge it even a bit. When connected to wall socket charger everything seems to be fine, it's charging.
But now the usb is not working, neither computer sees it (before i used it), i used other cables, no good. Now it's original ginderbread ROM, maybe i should reinstall it, but i can't do anything since usb is not working in any way.
Maybe someone of you had similar problems and know how to solve it?
Thanks in advance!
Click to expand...
Click to collapse
find a used Tooth Brush and clean ur Phone's Micro USB port thoroughly,then try connecting and see
Sun90 said:
find a used Tooth Brush and clean ur Phone's Micro USB port thoroughly,then try connecting and see
Click to expand...
Click to collapse
Thanks for the quick reply!
I tried cleaning it with Tooth Brush and even used special liquid for cleaning electronics contacts and corrosion removal, everything seems to be clean. But still nothing happens when connecting to laptop.
P.S. Same cable is working when charging from wall socket charger, so it seems the contacts must be clean and intact (at least power supply contacts), so maybe it should charge from laptop?
P.S.S. I forgot to mention, when the phone's battery is depleted, when i connect to laptop, it doesn't charge but in time phone becomes hot. So maybe this would prove it's a hardware problem?
Try different laptop USB port. If this doesnt help than probably your data cable is faulty. Just replace it with another one.
I think Your phone is fully operational if AC charging without any problems.
i9.0.1.3k galaxy imperator
SirKunon said:
Try different laptop USB port. If this doesnt help than probably your data cable is faulty. Just replace it with another one.
I think Your phone is fully operational if AC charging without any problems.
i9.0.1.3k galaxy imperator
Click to expand...
Click to collapse
I have already tried different laptop ports, even different laptops, already tried with different cables (which all functioning properly with other devices and all are marked U2). I am pretty sure that's not connection / cable problem.
Hi All,
I was wondering if anyone had any insights in to this problem I have been having.
Briefly, I have the 4g lte verion on EE's new network. I purchased the official MHL/HDMI adapter which works fine and the video is outputed to my sammy 50inch tv fine. The issue I have is the battery drains while doing so. I belive this may to due to the phone outputting more than it is drawing from the power source. Any thoughts ?
I spoke with Samsung tech and they said a number of people have started to report this issue and they are currently testing/investigating. If this is indeed the case seems a pointless acessory as a long video would possibly drain the whole battery, Im yet to test the full drain time.
Secondly, with a 3rd party docking cradle with spare battery slot which purchased from amazon (http://www.amazon.co.uk/eLifeStore®-Samsung-Desktop-Charger-Docking/dp/B008PPRGFY) also does not charge phone properly. Even with the orignial charger in the ac port (or usb port) . The phone reports as charging but stays the same or decreases. Charged directly from the socket it is fine. Strange!
Any help or thoughts would be greatly appreciated.
Thanks
Ian
It's common. Mine did that too! I switched to my old S2 charger, problem solved
Thanks Ill try that out, any idea why that works ?
lawboffin said:
Thanks Ill try that out, any idea why that works ?
Click to expand...
Click to collapse
No idea man? A design fault maybe? All I know is that my phone took for f#*%ing ever to charge with the USB type wall charger. I pulled it out of the socket and plugged my other other one in that was sitting right next to it and it started charging? Checked a few minutes later and it had climbed considerably so I pulled the USB cable out of the new plug and kicked it under the bed where it now lays resting not to be used again LOL.
USB plug/cord works perfectly fine? So I use it on the computer. My laptop even charges the phone via the USB cable faster than the socket plug (which is usually the opposite - as I am sure we are all aware). So yeah I would say poor design or defective wall plug or both or something? Wasn't going to send my phone back because of it. 2second decision problem solved Samsung phone is great!
Im having exactly the same problem.
I have an s3 on orange and have the same mhl adapter conected to my tv.
I have tried the charger from my s3 which does says its charging when I connect my phone but only for about a minute so I also tried using the charger from my s2 and that just does exactly the same.
An easier way is to buy the official allshare dongle for your hdtv then you can stream anything from your phones screen direct to your tv and can have the phone on charge via pc or wall socket at the same time,
Hope this helps
i suggest you throw away your original charger (slow charge) and its usb cable (loose - actually caused the extsd to become damaged to the point i had to repartition) and buy yourself a cheap usb cable for data (£2) and a 3rd party charger (pref not a usb adapter one - £5) and all should be fine!
I still experienced a small battery drain while using the mhl adapter, however, i froze a few apps with titianuim (ones i know run all the time like utter and tasker, paragon ntfs, easy ums, directory bind etc), and put it on min brightness - works like a charm. I know its a effort freezing apps but does the trick with my phone... Since finding that out i actually keep paragon & easy ums frozen till i need them...
just a few thoughts for you....
About a month ago this charging problem started overnight. Using the original wall charger and USB cable, current_max in GCC was about 200mA (instead of 1000mA). Somebody suggested a factory reset, which I did (restored apps and settings with TB). Problem still exists and is getting worse. Till now I was able to unplug and replug the charger a few times to bring it up to 1000mA, but now the current randomly goes down during the charge (esp if I use the phone).
The only thing I haven't tried is replacing the charger or cable, but I don't have another one. Any suggestions? Thanks.
how did you check this? an app?
fromanbr said:
how did you check this? an app?
Click to expand...
Click to collapse
Yes, used Galaxy Charging Current.
https://play.google.com/store/apps/details?id=com.abmantis.galaxychargingcurrent
I think it's down to a damaged usb port on the phone. I have pretty much the same thing on my phone since the cable was yanked out of it whilst charging a few months ago. I have several chargers and some are better than others...depending on the cable. I also have issues with connecting to my pc....I have to not touch it otherwise it just disconnects.
deafmetal said:
I think it's down to a damaged usb port on the phone. I have pretty much the same thing on my phone since the cable was yanked out of it whilst charging a few months ago. I have several chargers and some are better than others...depending on the cable. I also have issues with connecting to my pc....I have to not touch it otherwise it just disconnects.
Click to expand...
Click to collapse
But I have no other problem using the USB port apart from this? Is there anyway I can check it? Or shall I just wipe the phone and send it to be replaced?
My Atrix has started to act strangely.
I can only charge it over the Multimedia Dock and third-party chargers. The original charger doesn't do anything, neither does the car dock. It's like I don't even have it plugged in.
If I try to connect it to a windows PC, it won't get detected and also won't charge. No activity on the PC or the phone
This is regardless of ROM, as I also can't connect via fastboot or adb in CWM Recovery. I have however tried Stock 2.3.6 and Neutrino 2.9 CM7 both show no reaction. All other aspects of the phone work fine. But USB connectivity is impossible and charging only works via the multimedia dock and third-party chargers.
Does anyone have an idea what might be wrong? Hardware or software?
t.Lancer said:
My Atrix has started to act strangely.
I can only charge it over the Multimedia Dock and third-party chargers. The original charger doesn't do anything, neither does the car dock. It's like I don't even have it plugged in.
If I try to connect it to a windows PC, it won't get detected and also won't charge. No activity on the PC or the phone
This is regardless of ROM, as I also can't connect via fastboot or adb in CWM Recovery. I have however tried Stock 2.3.6 and Neutrino 2.9 CM7 both show no reaction. All other aspects of the phone work fine. But USB connectivity is impossible and charging only works via the multimedia dock and third-party chargers.
Does anyone have an idea what might be wrong? Hardware or software?
Click to expand...
Click to collapse
Have a look at cleaning your usb port (you should find instructions of how to clean them if you do a search)
Also try charging some other device using the original Moto charging, to check if the charger itself works properly.
ravilov said:
Also try charging some other device using the original Moto charging, to check if the charger itself works properly.
Click to expand...
Click to collapse
tried that charges work, but the phone won't accept them.
Windows however does detect the phone when in RSD mode.
t.Lancer said:
My Atrix has started to act strangely.
I can only charge it over the Multimedia Dock and third-party chargers. The original charger doesn't do anything, neither does the car dock. It's like I don't even have it plugged in.
If I try to connect it to a windows PC, it won't get detected and also won't charge. No activity on the PC or the phone
This is regardless of ROM, as I also can't connect via fastboot or adb in CWM Recovery. I have however tried Stock 2.3.6 and Neutrino 2.9 CM7 both show no reaction. All other aspects of the phone work fine. But USB connectivity is impossible and charging only works via the multimedia dock and third-party chargers.
Does anyone have an idea what might be wrong? Hardware or software?
Click to expand...
Click to collapse
That could be the USB becoming loose (i had a similar problem with my last phone). It's almost certainly a hardware problem.
I fixed mine by soldering the usb again with a hot air station (apply a flux paste on the contacts between the USB and the board, and use your soldering machine in order to melt the old solder).
scanuto said:
That could be the USB becoming loose (i had a similar problem with my last phone). It's almost certainly a hardware problem.
I fixed mine by soldering the usb again with a hot air station (apply a flux paste on the contacts between the USB and the board, and use your soldering machine in order to melt the old solder).
Click to expand...
Click to collapse
It does indeed seem to be a loose USB port. I still have waranty on it, so I'll probably send it in. I havn't had problems before with sending an unlocked atrix in. so I shouldn't see a problem here either.
Hey guys,
Just got the 5.1.1 update to my g watch and i noticed some charging differences, namely i can no longer charge my watch with my pc (its an always on pc). I checked cables etc and all are fine, and it will still charge through an AC outlet. Ive tried usb 2.0 and 3.0 ports.
Just wondered if anyone else had noticed this behaviour? The charging indicator wont even show up when its plugged into my pc. Also noting that usb debugging still works through my pc and all is detected fine there
Norman
manor7777 said:
Hey guys,
Just got the 5.1.1 update to my g watch and i noticed some charging differences, namely i can no longer charge my watch with my pc (its an always on pc). I checked cables etc and all are fine, and it will still charge through an AC outlet. Ive tried usb 2.0 and 3.0 ports.
Just wondered if anyone else had noticed this behaviour? The charging indicator wont even show up when its plugged into my pc. Also noting that usb debugging still works through my pc and all is detected fine there
Norman
Click to expand...
Click to collapse
I have the same update, and have the same problem as you, I only noticed it last night when I put it on to charge, I charge mine every night on the same usb port and have had no problems till last night, like yours mine will only charge from mains now, I've tested all my usb ports and they are all working okay. I hope some one has an answer for it.
I´ve checked this and mine works perfectly with a 5m cable connected to a usb hub. I´ve checked with other cables and without hub, and this still works.
I was able to address the issue by rebooting the watch.
JohnnyK58 said:
I have the same update, and have the same problem as you, I only noticed it last night when I put it on to charge, I charge mine every night on the same usb port and have had no problems till last night, like yours mine will only charge from mains now, I've tested all my usb ports and they are all working okay. I hope some one has an answer for it.
Click to expand...
Click to collapse
So do i! Usb ports are working fine, my pc is custom built so i have specific ports designed for quicker charging of anything plugged into them
NYCArcana said:
I was able to address the issue by rebooting the watch.
Click to expand...
Click to collapse
If i reboot the watch whilst it is on the charger, it charges via usb in my pc - but if i take it off and put it back on, the problem returns, despite it still working with an AC charger, i'm assuming this is a software problem as android knows when its charging via usb or AC anyway. Hopefully a dev over here or the LG guys will fix it - i don't want to have to restart my watch every time i want to charge it, it's a pain in the arse and i shouldn't have to do it - i have a lack of AC ports in my room, hence i charge through my pc
manor7777 said:
If i reboot the watch whilst it is on the charger, it charges via usb in my pc - but if i take it off and put it back on, the problem returns, despite it still working with an AC charger,
Click to expand...
Click to collapse
Just checked - same behavior here.
Always fun to be a beta tester for Google. At least there's a workaround.
NYCArcana said:
Just checked - same behavior here.
Always fun to be a beta tester for Google. At least there's a workaround.
Click to expand...
Click to collapse
haha well, i can use an AC power source and charge my phone in my pc, they are both super close to me just my phone takes longer to charge
My watch was slower to charge I did notice that. Took an entire extra hour!
I have the same problem but I posted in the wrong thread (LG G Watch General)
http://forum.xda-developers.com/g-watch/general/watch-charging-update-to-5-1-1-t3115504
Hi
I have 2 chargers because I use one for travel. After updating to 5.1.1, one works and the other does not. I swapped the components and found it was the cable. I hope that this helps.
hallevison said:
Hi
I have 2 chargers because I use one for travel. After updating to 5.1.1, one works and the other does not. I swapped the components and found it was the cable. I hope that this helps.
Click to expand...
Click to collapse
All my cables seem to produce the same result, maybe it's just me - i tried the one that came with a quick charge charger and even that does the same thing. hmm, will pick up a new cable tomorrow and check it out!
I just had my watch on the charger and with out taking it off, restarted it and now it is charging. Definitely a bug of some sort
sent from a device using an app
manor7777 said:
All my cables seem to produce the same result, maybe it's just me - i tried the one that came with a quick charge charger and even that does the same thing. hmm, will pick up a new cable tomorrow and check it out!
Click to expand...
Click to collapse
I wouldn't bother. Some chargers just behave like USB devices to be able to charge older Blackberrys. I used the same cable with the PC and with a wall wart. Only the wall wart works unless I reboot the watch.
Thanks, most people seem to confirm its a bug.. That's what I love about xda, you can always find things like this. Thanks for all your help.
Hi, glad I found this thread.
I am having the same problem. It doesn't charge since the 5.1.1 update, but if it lays on the charger and I reboot it, it charges. If I take it off and put it back on, it doesn't charge and I need to reboot it again.
Have the same problem. After reboot, it charges on usb much slower but doesn't look like it (No charging icon). Otherwise I love the update.
Did you all factory reset after updating your watch? I also couldn't charge until I rebooted but it charges fine after the reboot.
Same issue
I can confirm the same behaviour. I have to reboot the g watch and then it start charging. Definitely a bug
Same here, watch was charging wen I went to sleep but charging stopped at around 60%
Verstuurd vanaf mijn Nexus 5 met Tapatalk
I've expressed my frustration over at the Android Wear help forum:
https://productforums.google.com/fo.../VRbw2FWOaiI;context-place=forum/android-wear
Oddly, my watch did NOT include the wall charger even though I got it new from Best Buy. Did anyone else not get a wall charger? I'm not the type to just blindly miss something as useful as a USB wall charger. I remember opening it up and saying to myself, "I guess I'll have to use my monitors USB port." I don't throw that stuff out. I still have the box and all the packing materials as well, and it's nowhere in there.