Remix OS (Emergency Remount issue) - Remix OS for PC

Hi I am Vince Joshua D. Dato, a newbie here. I am currently having problem installing Remix OS on my PC, I have installed Remix OS in other partition to make the Remix OS run alongside Windows 10. At first things happened smoothly and fine, but after a few minutes while I am taking a bath, a message pop-up on the log (is it really log? or command thingy) Emergency Remount. After a few seconds my computer rebooted, and selected Remix OS again on the bootsector, but the Emergency Remount appeared again. I tried to do the said action for 3X, but nothing happened, that is why I lost hope in installing Remix OS on my PC; that caused me to uninstall it to my PC, and remove it's partition. If anyone knows how to fix this issue please reply immediately. :crying:
System specs:
GA-F2A55M-DS2 (rev. 3.0)
AMD A6-5400K APU with Radeon(tm) HD Graphics
AMD Radeon HD 6570
Secure boot disabled

Related

Windows boot

ive installed remix os and configure it as default os but now im unable to boot windows is there any solution to this withoout having recovery cd or usb plz help
82 views no reply need help plz
You made it the default os, thats the problem. If you can get an app which can change the boot sequence from remix os, than you can fix it without the recovery disk, otherwise you will need the recovery disk. I am saying all this assuming you have actually installed remix os on your harddisk. If your booting remix os from a usb, remove the usb before booting up your pc
more info would be nice...like how and where you installed remix os.
if on the same hdd but different partition, i m sure you replaced the windows bootloader.
if on another hdd, try going into the boot menu during post and select the different hdd and see.
@MikeChannon Close Thread Plz...
Already Fixed The Issue With A Old CD Of Windows 7.

Remix OS 3.0.101 boot problem

Hello, I'm facing a big problem on latest update for Remix OS.
My Remis OS 2.0 HDD installation was ok, I was running it normally. When 3.0 update came, I was sure that it would work ok too. But it didn't.
-The first problem appeared at USB writing speed test. The result was something like "Can't test writing speed. System may not boot". This screen is skipped.
-Then, system start to format data.img in Android-x86 logo screen. Well, another error appears: "can't format data". This screen is skipped as well.
-Finally, system boot start, at Remix OS logo screen. It does try to do something, my HD tries to load the system, it seems. But this process never finishes. This screen never is skipped, system does not reboot, no errors appears in the screen.
Again, Remix OS 2.0 works normally.
Here is my Notebook specs:
Samsung ATIV Book 2
Intel Core i5
Inter HD Graphics 4400
NVIDIA GeForce 710M
HDD installation

Remix OS does not start after installation (Warning: unrecognized partition table...)

Hi.
I want to install Remix OS on the ssd of my Lenovo Yoga 2 13. It's running Legacy mode.
I created a partition with 24gb with the letter D:
I downloaded the lastest Remix OS Version an installed it with the Installer in the .rar file.
After the reboot I chose Remix OS in the bootloader Menu and the I get the warning shown in the attached foto.
Booting GRLDR...
Warning: Unrecognized partition table for drive 81. Please rebuilt it using
a Microsoft-compatible FDISK tool(err=8). Current C/H/S=16383/201/63
Starting cmain() ...
Installing Phoenix OS works perfect, why Remix OS isn't?
I also tried to install Remix OS with EasyBCD, then it's starting but I get a grey windows when I start an App like VLC or QuickPic ...
And after the installation jide I got these messages:
jide setup wizard isn't responding ....
and process sytem isn't responding and Play Store crashed some times.
Can I solve the problem to run Remix OS smoothly?
If not I will stay on Phoenix OS which runs good on my Lenovo.
kind regards
avalanche99

"Installation Failed" error from Remix install tool on MSI Windows 8.1 PC.

OS: Windows 8.1 Pro 64 Bit
Motherboard: MSI Z97-X-Power AC
BIOS: UEFI
Secure Boot: OFF
Remix OS ISO: Remix_OS_for_PC_Android_M_64bit_B2016101201
Remix OS install tool: Remix_OS_for_PC_Installation_Tool-B2016080802
I am having trouble installing Remix OS on my MSI PC.
Every time I attempt to install Remix OS on my PC using the install tool, it ends with "Installation Failed" error. The install tool seems to successfully copy files to the specified partition. But the problem seems to occur when it attempts to install the bootloader.
I mounted the boot partition & checked it. In all my attempts at running the install tool, it never adds anything to the boot drive.
Please note, I am using a fresh installation of Windows 8.1. There are no security programs installed. Windows Defender is disabled. I have attempted installation using the built-in Administrator account, so there should be no permissions issues.
Can anyone tell me how to manually add the GRUB bootloader manually? I want to achieve what I have with my laptop (GRUB displaying "Windows/Remix OS"...and then Windows Boot Manager loads).
jaibubwan said:
OS: Windows 8.1 Pro 64 Bit
Motherboard: MSI Z97-X-Power AC
BIOS: UEFI
Secure Boot: OFF
Remix OS ISO: Remix_OS_for_PC_Android_M_64bit_B2016101201
Remix OS install tool: Remix_OS_for_PC_Installation_Tool-B2016080802
I was able to successfully install Remix OS dual boot on my Windows 10 tablet. But now I am having trouble installing Remix OS on my MSI PC.
Every time I attempt to install Remix OS on my PC using the install tool, it ends with "Installation Failed" error. The install tool seems to successfully copy files to the specified partition. But the problem seems to occur when it attempts to install the bootloader.
I mounted the boot partition & checked it. In all my attempts at running the install tool, it never adds anything to the boot drive.
Please note, I am using a fresh installation of Windows 8.1. There are no security programs installed. Windows Defender is disabled. I have attempted installation using the built-in Administrator account, so there should be no permissions issues.
Can anyone tell me how to manually add the GRUB bootloader manually? I want to achieve what I have with my laptop. GRUB displaying "Windows/Remix OS"...and then Windows Boot Manager loads.
Click to expand...
Click to collapse
I've got the very exactly same problem like you. It installs all filles but when installing or configure the bootloader in Step 3, it fails...
I use a Asus laptop with Intel Core i3 and Windows 10.
I've send an E-Mail to the support with Images of the Installer failure and when they are replying to me and I solved this proplem too, I will let you know
Mehdi0507 said:
when they are replying to me and I solved this proplem too, I will let you know
Click to expand...
Click to collapse
Thank you for replying Mehdi! I look forward to hearing from you.
jaibubwan said:
Thank you for replying Mehdi! I look forward to hearing from you.
Click to expand...
Click to collapse
So i dont know why it takes soooo long that the support sends me a answer... So im waiting to hear from the support. But i installed just for the moment with rufus Remix OS on mz external HDD and it works verz smooth. My USB sticks were too slow thats why i use my HDD.
But thats just a solution till i know why this error came on the Remix OS Installer.
Why are theren no other people here which maybe have a solution or a workaround
Same problem
Mehdi0507 said:
I've got the very exactly same problem like you. It installs all filles but when installing or configure the bootloader in Step 3, it fails...
I use a Asus laptop with Intel Core i3 and Windows 10.
I've send an E-Mail to the support with Images of the Installer failure and when they are replying to me and I solved this proplem too, I will let you know
Click to expand...
Click to collapse
I am also finding the installation failing at the point of installing bootloader. Would appreciate any help you can give.
same for me on my windows qp chinese tablet. Any workaround yet?
I had the same problem. I solved it by doing the following.
First, i tried installing some "Remix OS for PC Hacked Edition", and to my surprise, it worked. The OS boot selection, and the OS both worked well.
Then, I tried installing the original Remix OS again, with the normal method, I selected not to delete my data, and there was no error this time. I'm using it right now

Reinstall Remix OS without losing data

I have setup Remix OS as dual boot with windows 7
It was working fine till a few days ago
But now when I select Remix OS from Boot Menu
It shows \ubnldr.mbr
File corrupt or Missing
Is there any way to Re-Install Remix OS without losing any data
Or is there any way to fix this issue
to fix
this is a bug that happens in repartitioning the Hard Drive ... to fix just use open the command prompt as adm and type:
chkdsk / f d:
"d:" is where the remixOS is installed
sorry for the bad english
Chkdsk d: /f enter
Where d: is your remix drive
And make sure menu.lst is copied in the d :
Hello, i am kind of new
I installed the prime os in my pc following all the steps
With rufus .ISO dual boot in windows 7 and when it finished i got thid "failed to create data.img" now i have dual boot but prime os doesn't start, pls help

Categories

Resources