Related
I'm very dissatisfied with my cubot X9 camera colors so I tried flashing the latest rom with update for camera. http://www.needrom.com/download/cubot-x9/ After flashing the back camera wasnt working and there were some bugs. I think the rom is not complete and needs to be flashed with a full rom. I think so because this is what description reads : "ONLY MT6592
Add another Official ROM Cubot X9 Version: CUBOT_4271C_Z61W5_V11 – KOT49H – sinsoft92_cwet_kk
ONLY CAM: OV8865 and TP: IMX214"
My question is simple: How do I do this with flashtools? I allready tried flashing the one after the other but got same problem.
Thanks in advance
Carbon ROM for LG G2 Mini
In case that CM finished their updates for 12.1 I have wanted to compile something new.
And now I can get you Carbon - CM-based ROM with many nice features (and custom kernel also prebuilt)!
Fully supported: D610/D618/D620
Installation:
1) Install root
2) Install unlocked bootlader for your model
3) Install custom recovery (twpr 2.8.6+ preffered)
4) backup your current ROM in recovery
5) Wipe system, data, cache.
If you installed official 5.0.2 ROM you should install KK bootstack for your model (thanks @numpea for this) before to prevent unstable SIM signal!
for D618
for D620
for D620r - not needed on the latest version
6) Install Carbon ROM: LATEST BUILD (UNIFIED) (compiled 20-11-2015)
7) Reboot your phone
8) [Optional] Install Gapps: STRONGLY recommended version
9) Reboot again
10) Enjoy
Bugs:
NFC - not working (D620)
IRRC port - not working
To set up kernel features I recommend to use: Kernel Adiutor or Aero Kernel Control
Sources:
Kernel: https://github.com/NikitaProAndroid/android_kernel_lge_msm8x26
Device: https://github.com/NikitaProAndroid/android_device_lge_g2mds
Vendor: https://github.com/NikitaProAndroid/proprietary_vendor_lge
If you liked this project, you can donate
Donate to Nikita Pro Android:
QIWI: +79242282212
PayPal: [email protected]
Webmoney: Z398417766850
R271052030259
Donate to Quarx (for his hard work on L90):
PayPal: [email protected] / [email protected]
Click to expand...
Click to collapse
XDA:DevDB Information
Carbon ROM for LG G2 Mini, ROM for the LG G2 Mini
Contributors
Nikita Pro Android, Quarx
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: twpr 2.8.6.0+
Based On: CyanogenMod 12.1
Version Information
Status: Beta
Current Stable Version: 2015-11-20
Stable Release Date: 2015-11-20
Created 2015-10-30
Last Updated 2015-11-30
@Nikita Pro Android Do you think It's possible to do a dirty install over your CM12.1?
unexpected0ne said:
@Nikita Pro Android Do you think It's possible to do a dirty install over your CM12.1?
Click to expand...
Click to collapse
You can try ))
Wipe only dalvik-cache and system, then install ROM, install gapps (if you has installed it before) and reboot. If it don't boot you should make data clean.
Thanks, nikita for your work!
what features does this ROM contains?
Im waiting for GPS fix. THX Nikita!
The GPS is worse than on cm12.1?
Any screenshots?
maxfame said:
Any screenshots?
Click to expand...
Click to collapse
I have one.
Should I edit updater-script by myself?
Cafi96 said:
I have one.
Should I edit updater-script by myself?
Click to expand...
Click to collapse
You had downloaded rom before I wrote the head of this topic. See more careful, I uploaded fixed version and deleted old (which you're trying to install).
NFC not work d620r
Mirror for 29.10.2015 Build (MEGA): https://mega.nz/#!FA1VFZLB!FC0qI6j13_6W45EnbkQbWTrsQrujCnj-oVyijjwnraM
Screenshots
Any improvements that are worth to change from cm12,1 to carbon Rom? Or any new features?
Hi, @Nikita Pro Android
Thanks for your hard work
I have a little problem (Perhaps Big )
Look at the screenshot
I have 708.6mb for system partition ?! I tried a dozen times
Then when i flash cyanogenmod no problem, everything returns to normal
I love Carbon / SimpleAOSP so...
http://forum.xda-developers.com/attachment.php?attachmentid=3526974&stc=1&d=1446376187
Urticant2 said:
Hi, @Nikita Pro Android
Thanks for your hard work
I have a little problem (Perhaps Big )
Look at the screenshot
I have 708.6mb for system partition ?! I tried a dozen times
Then when i flash cyanogenmod no problem, everything returns to normal
I love Carbon / SimpleAOSP so...
http://forum.xda-developers.com/attachment.php?attachmentid=3526974&stc=1&d=1446376187
Click to expand...
Click to collapse
If you made repartition. I have about 100 mb free in /system. See in DiskInfo:
yup patitionned
but I need 1.5GB free because I put a lot of applications in the system
@Nikita Pro Android
how I can keep the partition intact?
Very good battery in standby!
Enviado de meu LG-D618 usando Tapatalk
i have a problem..my data is not working. i`ve set the apn but it`s not connecting...any ideas why is it happening?
My on-screen navigation bar is missing after restarts even though it is checked in option. disabling and enabling after a restart makes it visible again.
EDIT: fixed by deleting gravity-box which i restored from titanium
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
AbhinavIsgrt said:
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
Click to expand...
Click to collapse
You will get performance close to deodexed KitKat stock rom .. No problems so far .. surely upgrade your device to cm13 :good:
definitely no problems.. just great.
latest nightly works flawlessly..
there is plethora of feature in marshmallow and in being cyanogenmod
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
ulises.rodriguez said:
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
Click to expand...
Click to collapse
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
ABSathe said:
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
Click to expand...
Click to collapse
ABSathe, 1000 Thanks for the quick reply, for letting me know that I can directly clean flash cm13 over 5.1 and for the link to official nightlies !
Please confirm if this is the correct method to flash the CM13 ROM:
1) Boot into latest TWRP and Format Data: Wipe > Format DATA > Yes
2) Transfer ROM to SDCARD or Internal Storage: CM13 ROM + gapps 6.0
3) TWRP > Wipe > Factory reset and flash CM13 ROM, and then Flash gapps 6.0 (flash cm13 and gapps in a single session)
4) Reboot.
However, since I have already installed in my Moto-T, the version 2.8.7 of TWRP ( http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3100879 ), I would like to know if is better and also you recommended me to install first ( using fastboot flash recovery) the cm-13.0-20160810-NIGHTLY-condor-recovery.img (instead of TWRP 2.8.7) ? :
CyanogenMod Recovery:
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor-recovery.img
And then the:
CyanogenMod Build
cm-13.0-20160810-NIGHTLY-condor.zip (322.76 MB)
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor.zip
And Finally - Flash gapps 6.0:
http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
https://www.androidfilehost.com/?fid=24533103863139560
One last question, since I know that the CM13 is not based in an official Motorola release, I would like to know what is working flawlessly, and what is not working with in the Moto-E if I use this CM13 ROM ?
Please excuse all the questions, but I will like to be fully sure of the method and the correct files, that I have to use to successfully flash my Moto-E to CM13, to avoid future problems.
Thanks again for all your help !!
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
ABSathe said:
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
Click to expand...
Click to collapse
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
ulises.rodriguez said:
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
Click to expand...
Click to collapse
All the sensors are working perfectly
And regarding gapps .. I have installed older package (which I downloaded in July) .. but the latest one will just work fine
And latest nightly of cm13 is working perfectly for me.. so go for it
Sent from my Nexus 5X using XDA Labs
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working :
● Boots
● RIL (Calls, SMS, Data)
● Wi-Fi
● Bluetooth
● Camera ( Videos And Photos )
● Video Playback
● Audio ( Record and Playback )
● Flash
● GPS
What's not working :
● You tell me!
Instructions :
● Download the latest build and GApps
● Reboot to recovery
● Flash the latest build and GApps
● Reboot
Downloads :
● ROM : https://mega.nz/#!Qdx0QC4B!e7diTF9Je3VqKR7CmGAn7-jBOiie3O7PL6bGvWnDAIg
● Google Apps: http://opengapps.org/
● Front Cam Fix:
https://basketbuild.com/filedl/devs?dev=Adityaupreti&dl=Adityaupreti/Patch+and+Front+cam+Fix.zip
Credits :
@SoUnd001 : For his camera patches
CyanogenMod Team
SS:
XDA:DevDB Information
[ROM][UNOFFICIAL][Stable][6.0.1] CyanogenMod 13.0 [SM-G7105], ROM for the Samsung Galaxy Grand 2
Contributors
terabithia1572
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2017-06-01
Last Updated 2017-06-01
Thanks. I can use it this week end
skippy_skippy said:
Thanks. I can use it this week end
Click to expand...
Click to collapse
You're Welcome
Will you develop roms for g2
Bboy_23 said:
Will you develop roms for g2
Click to expand...
Click to collapse
yes
I am developing TW MM now.
TW MM everthing working but ril not working ı am working for fix
terabithia1572 said:
yes
I am developing TW MM now.
TW MM everthing working but ril not working ı am working for fix
Click to expand...
Click to collapse
Wow thats good to know... Now theres some life back to g2 thanks... Good luck with that
Hello i can't install it there was always an error 7
skippy_skippy said:
Hello i can't install it there was always an error 7
Click to expand...
Click to collapse
install Twrp bro
I have your version of twrp
skippy_skippy said:
I have your version of twrp
Click to expand...
Click to collapse
TWRP--> Settings--remove tick Zip file signature verification after try
I success to install but i have problème. It not reconize my sdcard . iand i can't install xposed. So i Côme back to m'y last ROM.
Same story...
skippy_skippy said:
I success to install but i have problème. It not reconize my sdcard . iand i can't install xposed. So i Côme back to m'y last ROM.
Click to expand...
Click to collapse
It not reconize my sdcard.
skippy_skippy said:
I success to install but i have problème. It not reconize my sdcard . iand i can't install xposed. So i Côme back to m'y last ROM.
Click to expand...
Click to collapse
ok ı upload try
Thank you very much for this rom awesome work
How to fix sd card issue. AND please mention the excat GAPS download link. Bqz in this linke there are many options am just confused which i hv to download
Can't install rom
Hi,
I'm trying to install this rom on my SM-G7105 but twrp keeps saying me that there is an error 7 when trying to flash. I don't understand why, i've checked lot of times my phone and its a SM-G7105, ms01lte.
When i boot on your twrp recovery, my computer says me its a G7102, but when i boot it, it prints 'Samsung galaxy grand 2 SM-G7105', the stock rom that is on it is for SM-G7105 and when going into parameters, its written SM-G7105.
I tryed to flash with SM-G7102 images in case of my device was buggy but when i do this, recoveries can't even flash my partitions :/ and i have to reflash it with a stock firmware with Odin.
Do you happen to know what might block twrp from flashing my device ?
I'd like to test your rom since i'm stuck at Android 4.4.2...
Bro this ROM is only for grand 2 G7105 not work in grand 2 G7102??
in with suraj said:
Bro this ROM is only for grand 2 G7105 not work in grand 2 G7102??
Click to expand...
Click to collapse
Ok, looks like i'm not clear enought, here is what adb says when using adb shell when my phone IS BOOTED :
Code:
D:\Android\sdk\platform-tools>adb shell
[email protected]:/ $
Can't post links for moment
ht tp://i.imgur.com/SoS98Q9.png
Here's what my computer says when the phone is booted IN RECOVERY :
ht tp://i.imgur.com/7AQqo4j.png
in with suraj said:
Bro this ROM is only for grand 2 G7105 not work in grand 2 G7102??
Click to expand...
Click to collapse
only For LTE
?
eline saglik good job
Due to lack of interest and time by my part, this project is discontinued, that means there will be no more updates bug fixes ect. There are a few other great projects to choose from such LineageOs by los-legacy.de , till the next time.. farewell ~
xFireFist Presents: xFire ROM for the Galaxy J5 2016 (SM-J510FN)
Based on the latest stock 6.0.1 firmware from Samsung. (J510FNXXS2AQI4) the first startup will be in Greek however you may select your own language by scrolling, besides being super fast and stable it is also a way of downgrading to 6.0.1 .
This rom is avaliable in two flavors
Regular
- Debloated
- De-knoxed
- ADB enabled by default
Special
- All the above
- Magisk Manager (You will have to flash the magisk.zip with twrp)
- Youtube Vanced
- Hades kernel 2.5 (CPU overclocked to 1.5ghz GPU overclocked to 720mhz)
v1.0 notes:
- Facebook App updater has been removed
- Samsung Health has been removed
- GearVR has been removed
- Microsoft apps were removed (Word,Skype ect)
Download Link :
AndroidFileHost: https://www.androidfilehost.com/?w=files&flid=302212
XDA:DevDB Information
xFire ROM, ROM for the Samsung Galaxy J5
Contributors
xfirefist
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: unlocked bootloader, TWRP Recovery
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2019-11-16
Created 2019-11-16
Last Updated 2020-04-18
Reserved.
great work man!
xfirefist said:
Reserved.
Click to expand...
Click to collapse
thanks .. download now haha
xfirefist said:
xFireFist Presents: xFire ROM for the Galaxy J5 2016 (SM-J510FN)
Based on the latest stock 6.0.1 firmware from Samsung. (J510FNXXS2AQI4) the first startup will be in Greek however you may select your own language by scrolling, besides being super fast and stable its also a way of downgrading to 6.0.1 .
This rom is avaliable in two flavors
Regular
- Debloated
- De-knoxed
- ADB enabled by default
Special
- Magisk Manager (You will have to flash the magisk.zip with twrp)
- Youtube Vanced
- Hades kernel 2.5 (CPU overclocked to 1.5ghz GPU overclocked to 720mhz)
v1.0 notes:
- Facebook App updater has been removed
- Samsung Health has been removed
- GearVR has been removed
- Microsoft apps were removed (Word,Skype ect)
Download Link :
AndroidFileHost: https://www.androidfilehost.com/?w=files&flid=302212
XDA:DevDB Information
xFire ROM, ROM for the Samsung Galaxy J5
Contributors
xfirefist
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: unlocked bootloader, TWRP Recovery
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2019-11-16
Created 2019-11-16
Last Updated 2019-11-16
Click to expand...
Click to collapse
Hello and the special version also includes everything that the regular version brings? or are very different
Thanks
andyvx23 said:
Hello and the special version also includes everything that the regular version brings? or are very different
Click to expand...
Click to collapse
Yes it does, if you want root access make sure to flash magisk.zip as its not pre-packed with the rom!
which turns off the wifi after turning it on
---------- Post added at 11:57 PM ---------- Previous post was at 11:56 PM ----------
i cant turn wifi on i try to instal some kernel but the pobleme dont sloved
noussair78125 said:
which turns off the wifi after turning it on
---------- Post added at 11:57 PM ---------- Previous post was at 11:56 PM ----------
i cant turn wifi on i try to instal some kernel but the pobleme dont sloved
Click to expand...
Click to collapse
Im aware of this issue, i will look into it when i get the time.
Do I need to downgrade bootloader to flash this?
NecromancerViper said:
Do I need to downgrade bootloader to flash this?
Click to expand...
Click to collapse
No, flash the regular version as the special one has wifi issues which i will look into probably this weekend.
Volte working this rom ?
mahim.khan said:
Volte working this rom ?
Click to expand...
Click to collapse
It should.
xfirefist said:
No, flash the regular version as the special one has wifi issues which i will look into probably this weekend.
Click to expand...
Click to collapse
even regular version has WiFi problems. J510FN (DBT)
I even debloated and deknoxed a DBT firmware myself (with stock boot.img) and had WiFi problems.
I didnt try downgrading BL yet though
Edit: Cherry Kernel for MM fixed it.
Is this rom is very smooth and is volte is working in this rom