Official nougat OTA? - Wileyfox Swift 2 Questions & Answers

Is there ever going to be an official nougat OTA for the swift 2 considering that Cyanogen OS is no longer being updated? Or is the nougat update going to scrap Cyanogen OS and go with something different?

I've seen in some videos where the reviewer was told (from the company) that the device should get nougat anytime soon, but they didn't gave any timetable. It's going to be fun if they drop CyanogenOS and switch to any other system, since Wileyfox doesn't have the resources OnePlus had when they created OxygenOS, for example.
Still, this device seems to be quite open and developer-friendly, just look at the original Swift and all the development it already had. Whenever I get mine after this Christmas, I'd want to try to start working on bringing CyanogenMod 14.1 to it, but don't quote me on that. I'll try to do my best
EDIT: I've found the video I mentioned, however I think on Recombu's review they did also mention something... Hope it's helpful.

I talked with Wileyfox's official account on Twitter and they told me the very first Swift shall get the Nougat update with Cyanogen goodies. If the first gets it, why wouldn't the following devices?
(Sorry for my broken English)

linuxct said:
I've seen in some videos where the reviewer was told (from the company) that the device should get nougat anytime soon, but they didn't gave any timetable. It's going to be fun if they drop CyanogenOS and switch to any other system, since Wileyfox doesn't have the resources OnePlus had when they created OxygenOS, for example.
Still, this device seems to be quite open and developer-friendly, just look at the original Swift and all the development it already had. Whenever I get mine after this Christmas, I'd want to try to start working on bringing CyanogenMod 14.1 to it, but don't quote me on that. I'll try to do my best
EDIT: I've found the video I mentioned, however I think on Recombu's review they did also mention something... Hope it's helpful.
Click to expand...
Click to collapse
It still doesn't mention when it will get it but thanks for the help. Also, CM14 for this phone would be great

skinnyflirter said:
I talked with Wileyfox's official account on Twitter and they told me the very first Swift shall get the Nougat update with Cyanogen goodies. If the first gets it, why wouldn't the following devices?
(Sorry for my broken English)
Click to expand...
Click to collapse
Did they mention when the first swift would get it at all? And your English is absolutely fine

Sadly no, they just told me it would be "as soon as possible", haha!

important: Cyanogen is shutting down its services soon
os included
it's the apocalypse
---------- Post added at 04:13 PM ---------- Previous post was at 04:03 PM ----------
whoops sorry I forgot to give you the source
just check the Cyanogen blog
it's right there
"oh hey guys we're shutting almost everything down
bye"

OTA with Android 7.1.1 almost done. Just wait few weeks.

incertcoin said:
OTA with Android 7.1.1 almost done. Just wait few weeks.
Click to expand...
Click to collapse
How do you know? Are you part of wileyfox team. What is your source? Thanks

We're already in february (the month the update was supposedly launched), so, it's highly probable it'll release during next few weeks for the entire Marmite device family (Swift 2, Swift 2+ and Swift 2X).
incertcoin said:
OTA with Android 7.1.1 almost done.
Click to expand...
Click to collapse
However, they did not officially say whether the update would contain Android 7.0 or 7.1.1, so, what are your sources on that? And what do you mean by "almost done"? Since from what I know, if they really plan to launch it this month they'd currently be in testing phase, not in production

I've tried to install the OTA update called cm-marmite-a1478a0ee9-to-7aa1c7975e-signed.zip and avaiable in the com.cyngn.fota folder
And I've got a error message.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The last time I've saw an error message like that was during an installation of an android nougat rom on a oneplus X phone.
Somebody already have the OTA update installed on his phone ?

bahjesaispas said:
I've tried to install the OTA update called cm-marmite-a1478a0ee9-to-7aa1c7975e-signed.zip and avaiable in the com.cyngn.fota folder
And I've got a error message.
The last time I've saw an error message like that was during an installation of an android nougat rom on a oneplus X phone.
Somebody already have the OTA update installed on his phone ?
Click to expand...
Click to collapse
You can't install a official OTA through TWRP, it must be with the AOSP recovery that came preinstalled.
To solve it: Flash the latest fastboot images available at cyanogen's support site and from there you should be able to install the OTA.

linuxct said:
You can't install a official OTA through TWRP, it must be with the AOSP recovery that came preinstalled.
To solve it: Flash the latest fastboot images available at cyanogen's support site and from there you should be able to install the OTA.
Click to expand...
Click to collapse
Dear friend, I installed the last Cyanogen recovery, but this was the result.
Thank you in advance.

ABC999CBA said:
Dear friend, I installed the last Cyanogen recovery, but this was the result.
Thank you in advance.
Click to expand...
Click to collapse
That picture says that the system partition has unexpected contents (aka tampered). You need to flash all fastboot images, meaning, erasing your userdata (copy that zip to your pc/external SD card before erasing userdata, since you'll loose it), cache, system partition, dtb, modem, etc, just like I said in my previous post. After that it should work just fine

I thought that I have to install only the recovery "original". If I install all options I will lose everything that I have in my system now??
Can I disable OTA?
Thank you in advance.
Enviado desde mi C6903 mediante Tapatalk

ABC999CBA said:
I thought that I have to install only the recovery "original". If I install all options I will lose everything that I have in my system now??
Can I disable OTA?
Thank you in advance.
Enviado desde mi C6903 mediante Tapatalk
Click to expand...
Click to collapse
If you flash everything, yes, it will remove all contents even from your internal memory.
You can disable OTA by removing WF-OTA folder from /system/app (Although I'm not sure if the system will like the idea too much, so I'd rather freeze the package with TB or something like that).
Si flasheas todo, sí, va a eliminar incluso lo que tengas en la memoria interna.
Puedes quitar el sistema de OTA borrando el contenido de la carpeta WF-OTA de /system/app (Aunque no estoy muy seguro de si al sistema le hará mucha gracia, así que mejor congelaría el paquete con Titanium o algo similar).
Me alegra ver que no soy el único de por aquí con un Swift 2

Ok I will use TB to stop the module.
Thank you for your information.
Best regards.
Enviado desde mi C6903 mediante Tapatalk

Well it's February let's see how wileyfox stand by there statement and rolling out os update ,, I'm not very hopeful
Sent from my Swift 2 using Tapatalk

At the moment the testing stage, almost finished. Some users in Russia already received the update to 7.1, though by mistake. And it doesn't matter who the source is.

incertcoin said:
At the moment the testing stage, almost finished. Some users in Russia already received the update to 7.1, though by mistake. And it doesn't matter who the source is.
Click to expand...
Click to collapse
Well...if you don't give sources...how can we know you're not lying...? Plus it's not gonna kill you to add a link or something...?

Related

[Tutorial] New Motorola Logo by Fabio PAB

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ONLY FOR RAZR XT910 AND XT912
[Requirements]
1. Motorola drivers installed
2. Uncompressed file.
[Downloads]
Motorola drivers
RSD Lite
New Motorola Logo by Fabio PAB
[Instructions]
1 - With the phone off, leave the device on the screen of AP Fast Boot Mode.
(if you do not know that this screen is just off the Razr and connect it by pressing the power along with the volume buttons, go to the third option with the volume down button and select the button to increase the volume).
2 - Connect the phone to PC, open RSD Lite, click the three dots (...) and select the file Boot_New_Logo_Motorola.xml
3 - Click Start and wait for the phone to restart.
4 - Okay, now just enjoy the Razr connecting with the image of the new boot logo.
Original logo:
Link
Replace the file downloaded by this logo within the installation folder.
Credits: Fabio PAB Forum Portal Android Brazil
If copy, cite CREDITS.
What are the other files for?
Hey there Fabio!
Great job coming up with the logo within hours of its release from Motorola itself. It is an achivement UNLOCKED !! =D
But, I was wondering what the other files in the RAR archive are for: such as logo.bin, mbm.bin, mbmloader.bin, allow-mbmloader-flashing-mbm.bin
Are the supposed to be there at all? Because your tutorial just uses the xml file... I'm afraid something will screw up if I don't do it correctly..
Anyways, I shall give this a try personally whenever I'm on my desktop, which has RSDLite installed.
Thank you so much for the mod!!
Ficou BLZ
Opa colega, muito boa essa ideia, fiz todo o procedimento e deu tudo certo..
So uma pergunta colega, e se eu quiser voltar ao logo original?
-------------------------------------
Thanks mate, this very good idea, I did the whole procedure and everything went well ..
one more question mate, and if I want to return the original image?
Thanks ! Looks great
Is there a belonging bootanimation ? Would be nice to have all in "one" style :good:
Sgt.7Eleven said:
Hey there Fabio!
Great job coming up with the logo within hours of its release from Motorola itself. It is an achivement UNLOCKED !! =D
But, I was wondering what the other files in the RAR archive are for: such as logo.bin, mbm.bin, mbmloader.bin, allow-mbmloader-flashing-mbm.bin
Are the supposed to be there at all? Because your tutorial just uses the xml file... I'm afraid something will screw up if I don't do it correctly..
Anyways, I shall give this a try personally whenever I'm on my desktop, which has RSDLite installed.
Thank you so much for the mod!!
Click to expand...
Click to collapse
terio_xf said:
Opa colega, muito boa essa ideia, fiz todo o procedimento e deu tudo certo..
So uma pergunta colega, e se eu quiser voltar ao logo original?
-------------------------------------
Thanks mate, this very good idea, I did the whole procedure and everything went well ..
one more question mate, and if I want to return the original image?
Click to expand...
Click to collapse
BrainChecker said:
Thanks ! Looks great
Is there a belonging bootanimation ? Would be nice to have all in "one" style :good:
Click to expand...
Click to collapse
Posted the original Logo.
Replace the file downloaded by this logo within the installation folder.
Thanks Fabio. Looks great. If only you could make it more smoother, some part looks pixelized.
I am not complaining. I am enjoying the one you posted already. Thanks for your work :good::good::laugh::laugh:
---------- Post added at 07:08 PM ---------- Previous post was at 06:51 PM ----------
one question... Can you tell us how did you decrypt that bin files
shreyas.kukde said:
Thanks Fabio. Looks great. If only you could make it more smoother, some part looks pixelized.
I am not complaining. I am enjoying the one you posted already. Thanks for your work :good::good::laugh::laugh:
---------- Post added at 07:08 PM ---------- Previous post was at 06:51 PM ----------
one question... Can you tell us how did you decrypt that bin files
Click to expand...
Click to collapse
Posted the mod. already with the corrected image.
Hug
fabiobatera said:
Posted the mod. already with the corrected image.
Hug
Click to expand...
Click to collapse
Thanks :thumbup::thumbup:
Can you share with us how did u decrypt those bin files
Sent from my XT910 using Tapatalk 2
@fabiobatera: Your work got featured HERE bro :good::good:
Thanks again !
You should probably list RSD Lite in the requirements.
After installing this my phone can't get past the new logo. It just sits there with black screen and a red LED. I had to disconnect and reconnect to get RSD Lite to recognize it as pass, but that's been done before.. Whats wrong?
Edit: Feeling quite frustrated as simply installing a new logo seems to have caused me to be forced to reinstall my phone entirely, if I can even get that working.
SweStag said:
You should probably list RSD Lite in the requirements.
After installing this my phone can't get past the new logo. It just sits there with black screen and a red LED. I had to disconnect and reconnect to get RSD Lite to recognize it as pass, but that's been done before.. Whats wrong?
Edit: Feeling quite frustrated as simply installing a new logo seems to have caused me to be forced to reinstall my phone entirely, if I can even get that working.
Click to expand...
Click to collapse
Really why? Its clearly 1 of the tools listed to perform the install. Also before doing any mod 1 should have a backup and fastboot files handy. Just my 2 cents.
Sent from my XT910 using xda app-developers app
You misunderstand, I was saying that you should add RSD Lite in the requirements, as its not mentioned at all until you get to that step as it is now. Those who don't know they'll need it might start the process up and then realize they're missing RSD Lite.
And yeah, I have backups etc. For some reason I couldn't get anywhere however. I fixed it now by reinstalling my ROM via recovery. The new logo is there, and the ROM is now working. I have no idea what went wrong, never seen that kind of issue before. Very strange, but it works now at least.
Logo looks great!
marconz said:
Really why?
Click to expand...
Click to collapse
Because I also think those who are new might not be aware about RSD lite. Not everyone is experienced in flashing things, there are many beginners and making a guide noob friendly is not a harmful thing. It's just a suggestion to op, that's all. And I see he has fixed it too.
Thanks for the logo again!
Sent from my XT910 using Tapatalk 2
Damnnnn dude you're rocks...!!! It's like I have a brand new upgraded RAZR MAXX...
Nice Logo, does this also work for XT912? I'm curious.
Thank you!
BeYourGravity said:
Nice Logo, does this also work for XT912? I'm curious.
Thank you!
Click to expand...
Click to collapse
Ai friend are testing the XT912, but I think that works.
Hug.
really beautifull! works great!
fabiobatera said:
Ai friend are testing the XT912, but I think that works.
Hug.
Click to expand...
Click to collapse
The XT912 (Verizon Razr) works fine with it! Thank you for this! Pretty awesome! Looks good as is, but if there was a way to get the circle a little less pixely, it'd be 10x more awesome!
Thanks again!
man, thank you so much for this
i really2 appreciate it and use it
XT910
Works with XT912

[ROM][Nougat 7.0] AxvY Rom for SM-J7108 stable and sexy AF [Best Rom j7108]

I posted previously for j7108 https://forum.xda-developers.com/galaxy-j7/development/rom-edge-panel-stable-rom-sm-j7108-t3604617
updated:7/1/2018
- updated kernel aim to save battery and boost in performance - fix "kernel is not seandroid enforcing"
- Changed keyboard, added few language to system by default. I am aware it still cannot download Chinese language. Probably is the rom itself that I'm using has this error. I will not updating this rom further until I see there has an update that reduced in file size that worth for the update. So bear with me guys. There are alternative like SwiftKey and Gboard if you need language other than English
If you are not planning to use Samsung Keyboard, you can download and flash this: https://goo.gl/qL2faF
-added option to change screen resolution to 720P!! Which mean less heat, more smooth, more battery if you are using 720p as your resolution, tested and working! (Don't go beyond FHD j7108 screen only has resolution of 1920x1080)
-Lot of fontssss until it need to take a while to load
Remove your phone password and restart first.
Shouldn't need to wipe your phone. But wipe dalvik/cache after you flash the zip using twrp
What I would suggest before you install, root your phone so u can backup apps data, contact etc fully using computer application (ex: https://pro.25pp.com/) connected to your phone. After you install AxvY rom then you can restore it.
This Rom contain Google Play too.
Bloatwares are heavily removed, after flash this Rom you will able to uninstall them!
- using newest update from Samsung
- Camera seem to focus faster and able to capture clearer picture
Once you go AxvY you won't want go back to Marshmallow nor Lollipop
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tips for keyboard:
Set Keyboard Swipe to Cursor Control, when you typing you can move the cursor up down left right easily
Keyboard size is helpful especially for those screen with problem
Download language pack to enable spell checking.
close Frp Lock, enable Developer Options(google it for step), enable OEM Unlock before flashing
Will void warranty. Here is the steps, easy af:
1. Download and extract one time, this contain files needed by AxvY so flash "Odin Yi.tar" with Odin(google if you have no idea)
j7108 - Google Drive
drive.google.com
2. Download this and extract 7z to zip it using computer. Put the "j7108 Nougat AxvY Rom Elite.zip" into your phone or sd card
MD-5: C6A6BC763FA2AC2AC4C0D160DBAD3DB2
3. Switch off your phone, enter twrp HOME+POWER+ volume up. Install the "j7108 Nougat AxvY Rom Elite.zip" wipe dalvik/cache
I don't have sm-j7108 phone anymore but I like it so much, I am collecting money to buy second hand sm-j7108 for continue developing.
Do buy me a drink if you appreciate my work as it help to motivate me continue j7108 update.
Done!! Click the "Thanks" if you like this rom as I do.
Special thanks to Likefr for intensive testing. It's stable and all functions are working properly
How to Adb Debug: https://forum.xda-developers.com/android/software-hacking/guide-how-to-adb-debug-revoke-usb-t3715074
If you want root, place SuperSu in your phone, and flash it: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip
Credits:
Tickle My Android - @Ticklefish
SuperR's Kitchen - @SuperR.
XDA for resources
And myself @doulc , likefr, Leo for reporting and testing, @ililaoban, tangz, Samsung, @billeuze helping in testing
https://www.youtube.com/watch?v=JFla32cfOc8
video link updated
If you need help just send me a private message or comment below.
إذا كنت بحاجة إلى مساعدة فقط أرسل لي رسالة خاصة أو تعليق أدناه.
Si necesita ayuda, solo envíeme un mensaje privado o un comentario a continuación.
Awsome Work Bro
Going in Right directions!
Keep it up
prashantp01 said:
Awsome Work Bro
Going in Right directions!
Keep it up
Click to expand...
Click to collapse
I want to say thank you, with your help too only I can do this <3
Thanks doulc. I'll try installing it this weekend. I was too busy with my projects to give the beta a try, sorry.
billeuze said:
Thanks doulc. I'll try installing it this weekend. I was too busy with my projects to give the beta a try, sorry.
Click to expand...
Click to collapse
This is not a beta anymore ? this is a stable release
doulc said:
https://www.youtube.com/watch?v=JFla32cfOc8
video link updated
Click to expand...
Click to collapse
New tips, close battery percentage to save battery
go to Settings > search "battery"
Very smooth!
Even better than 6.0/5.1
UI is much beautiful than before and it seems like s8/note8 although j7108 is not a powerful phone.
I highly recommend to those who haven't update their j7108 to this version as much improved in many way.
leung6340 said:
Very smooth!
Even better than 6.0/5.1
UI is much beautiful than before and it seems like s8/note8 although j7108 is not a powerful phone.
I highly recommend to those who haven't update their j7108 to this version as much improved in many way.
Click to expand...
Click to collapse
thank you for your kind word. I appreciate it
This is my results.
leung6340 said:
This is my results.
Click to expand...
Click to collapse
Notice u are on power saving mode? And have to close all backgroud apps before running a test else it will affect the result
Hi! Does anyone know when approximately will be released the official Android 7.0 on our J7108 ?
RS.TJ said:
Hi! Does anyone know when approximately will be released the official Android 7.0 on our J7108 ?
Click to expand...
Click to collapse
I predict around end of November or around December
After you enable Oem Unlock, it should look like this
Thx bro!!1
This ROM awesome!!
akaMETEOP said:
Thx bro!!1
This ROM awesome!!
Click to expand...
Click to collapse
Thanks for the pictures. I hope u enjoy this rom ?
doulc said:
I posted previously for j7108 https://forum.xda-developers.com/galaxy-j7/development/rom-edge-panel-stable-rom-sm-j7108-t3604617
BACKUP the DATA partition using TWRP first
Shouldn't need to wipe your phone. But wipe dalvik/cache after you flash the zip using twrp
This Rom contain Google Play too.
Bloatwares are heavily removed, after flash this Rom you will able to uninstall them!
- using newest update from Samsung
- Camera seem to focus faster and able to capture clearer picture
Tips for keyboard:
Set Keyboard Swipe to Cursor Control, when you typing you can move the cursor up down left right easily
Keyboard size is helpful especially for those screen with problem
Download language pack to enable spell checking.
close Frp Lock, enable Developer Options(google it for step), enable OEM Unlock before flashing
Will void warranty. Here is the steps, easy af:
1. Download and extract one time, flash "Odin First.tar" with Odin (google if you have no idea)
https://mega.nz/#!XNMjAD6L!qLuqjWRzVAG01pjaHmXcp6XKEACgN714E1_BvgHqBbM
2. Download this and extract it using computer. Put the "j7108 Nougat AxvY Rom International.zip" into your phone or sd card
https://mega.nz/#!TUlR2ZjI!52V2uEwnBYneRchMKgY77JpHr_D1Z-JrMwBmRjVyI0Q
3. Switch off your phone, enter twrp HOME+POWER+ volume up. Install the "j7108 Nougat AxvY Rom International.zip" wipe dalvik/cache
Done!! I don't have sm-j7108 phone anymore but I like it so much, please donate me any amount you like so I can buy second hand sm-j7108 for continue developing.
Special thanks to Likefr for intensive testing. It's stable and all functions are working properly
If you want root, place this in your phone, and flash it: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip
Credits:
Tickle My Android - @Ticklefish
SuperR's Kitchen - @SuperR.
XDA for resources
And myself @doulc , likefr, ililaoban, Samsung
Click to expand...
Click to collapse
Alguien me ayudaria a como instalar twrp en este modelo sm- j7108 china mobile he intentado de todo. No puedo ni rootearlo. Me sale error en modo dowloader. Junto con odin :crying:
Camilo Vma said:
Alguien me ayudaria a como instalar twrp en este modelo sm- j7108 china mobile he intentado de todo. No puedo ni rootearlo. Me sale error en modo dowloader. Junto con odin :crying:
Click to expand...
Click to collapse
Damn use English or google translate it. Download Telegram app and search my telegram: @doulc
doulc said:
Damn use English or google translate it. Download Telegram app and search my telegram: @doulc
Click to expand...
Click to collapse
Te escribi

Convert your H872PR (Claro PR) LG G6 to H873 and update to Oreo!

Huge thanks to @hyelton , @Ferga2790 & @jounatam for instructions and testing.
DO THIS AT YOUR OWN RISK! I AM NOT RESPONSIBLE FOR DATA LOSS OR BRICKED DEVICES! Make a backup of your phone's data as it might be necessary to factory reset it further down the line.
With the disclaimers out of the way, let's begin!
What you will need:
H872PR G6 (H871 and LS993VZA work too) running Stock Nougat
Reliable USB cable & port (USB 3 recommended)
The files stored here: http://storagecow.eu/index.php?dir=Xda%2FLG+G6%2FLGUP%2F (huge thanks to @hyelton for these files!)
The H873 Oreo kdz of your choice (tested by @jounatam with H87320c_00_OPEN_CA_OP_0424.kdz & by me with H87320e_00_OPEN_CA_OP_0601.kdz)
~7-8 minutes of patience
STEP 1: PREPARING LGUP:
Download all the linked files in the third bullet point earlier.
Run the LG Mobile driver installer. Wait for it to install completely!
Run the LGUP installer once the driver has been installed.
After installing LGUP, go to it's install directory (Usually C: \ Program Files (x86) \ LG Electronics \ LGUP).
Extract the LGUP_V20dll_Patched (3).zip file to your desktop or folder of choice.
Copy the files that you just extracted into the LGUP install directory (It will ask to overwrite LGUP.exe and the folder called "Model").
You should now be able to run LGUP!
BEFORE THE NEXT STEP, PUT YOUR G6 INTO DOWNLOAD MODE BY TURNING IT OFF AND HOLDING VOLUME UP (+) WHILE CONNECTING YOUR PHONE INTO THE PC!
STEP 2: LGUP OPTIONS AND FLASHING:
Run LGUP from the desktop shortcut or by clicking LGUP.exe in it's install directory.
On the lower half of the screen, click on the "BIN file" space (below "file path"), a button with 3 dots (...) should appear on the side.
Click the button and look for your Oreo kdz. MAKE SURE IT'S AN H873 KDZ! I can't stress this enough.
Once the kdz location appears next to "BIN file", click on the "Partition DL" option.
Click start.
A small window prompt will appear with a few checkboxes. Click "Select all".
Another window will appear asking if the selected operations are correct. Click "yes".
The flashing process will begin. Make sure to not disconnect your phone or power off your computer!
Once it's done, your G6 will reboot and LGUP will instruct you to "click to continue". Click the notice then disconnect your phone.
You should be running Oreo now! If you chose the 20e security patch, your phone will be automatically rebranded to G6 ThinQ on bootup.
HOW DO I UPDATE MY PHONE?
Just follow the first steps but still make sure you are using an H873 kdz file! I have tested updating with the August security patch (H87320g_00_OPEN_CA_OP_0809.kdz) and it works normally. You won't need to reset data.
I FINISHED FLASHING MY PHONE AND NOW IT WON'T BOOT!
If your phone gets stuck in the LG G6 (or LG G6 ThinQ) logo, hold the power and volume down (-) button at the same time. Once the phone reboots, let go of the power button and quickly hold it again, without letting go of the volume down button. You should enter the factory reset mode.
Once in factory reset mode, follow the on-screen instructions to reset your phone! Once done, your G6 will reboot and perform setup operations as if it were a new device.
Finally, a few warnings:
Your phone will no longer be able to go back to Claro's firmware, at least not for now.
If you had to factory reset your phone, you will be locked out of it if you don't remember the original gmail account tied to it.
Although this method has been working for the H871 and LS993VZA models, I cannot guarantee that this method will work 100% of the time with any device.
Hope this helped! Huge thanks again to everyone who posted valuable information leading up to this.
Does this work for H872TN (T-mobile)? Anyone tested the above method?
Thanks a lot for sharing.. Finally manage to update to H873 oreo from H872PR nougat..
Now I'm wondering if I could unlock the bootloader just like other variants..
Kinda regret buying this phone online without doing a research about the variants..
I thought all variants should be able to unlock the bootloader..
fathulakmal said:
Thanks a lot for sharing.. Finally manage to update to H873 oreo from H872PR nougat..
Now I'm wondering if I could unlock the bootloader just like other variants..
Kinda regret buying this phone online without doing a research about the variants..
I thought all variants should be able to unlock the bootloader..
Click to expand...
Click to collapse
Sadly, I haven't seen a bootloader unlock for H873 yet; but don't lose hope!
EDIT: I have updated to the newest security patch(H87320g_00_OPEN_CA_OP_0809.kdz) without issue. If you have already converted your phone to H873, it will update normally and you won't need to reset data. Your files will be intact!
mannunikhil said:
Does this work for H872TN (T-mobile)? Anyone tested the above method?
Click to expand...
Click to collapse
Unfortunately, I have not tested this with any other device as I only own an H872PR. It's not advisable to update using this method as some G6 models have different hardware and software developed for them and you could end up bricking them.
I have the H872 PR, I can use this to update it to android 8.0
RLCircuit said:
Unfortunately, I have not tested this with any other device as I only own an H872PR. It's not advisable to update using this method as some G6 models have different hardware and software developed for them and you could end up bricking them.
Click to expand...
Click to collapse
I would like to know, if this works for my Lg g6, H872 PR, I have not found any official Rom to update it to android 8.0 oreo
Kenethorozc said:
I would like to know, if this works for my Lg g6, H872 PR, I have not found any official Rom to update it to android 8.0 oreo
Click to expand...
Click to collapse
Hello! Sorry for the late reply
I can confirm that the H873 KDZ files I mentioned in the first post work for the H872PR. Let me know if you need any help!
Puedo volver a android 7.0
RLCircuit said:
Hello! Sorry for the late reply
I can confirm that the H873 KDZ files I mentioned in the first post work for the H872PR. Let me know if you need any help!
Click to expand...
Click to collapse
La verdad que mi lg g6 actualizo a android oreo, pero lo siento con un poco de lag, y la bateria se me descarga rapido, encontre la rom que tenia anteriormente, y mi pregunta es? Podre volver a android 7.0 utilizando la rom que tenia antes utilizando este mismo metodo
Te agradeceria mucho tu contestacion
Kenethorozc said:
La verdad que mi lg g6 actualizo a android oreo, pero lo siento con un poco de lag, y la bateria se me descarga rapido, encontre la rom que tenia anteriormente, y mi pregunta es? Podre volver a android 7.0 utilizando la rom que tenia antes utilizando este mismo metodo
Te agradeceria mucho tu contestacion
Click to expand...
Click to collapse
Hola!
Aunque no lo he probado, es posible que puedas volver a la version que tenias anteriormente utilizando el mismo procedimiento que he explicado aqui. Si funciona (o no), me dejas saber! De esa manera actualizo la información que he escrito en el primer post.
Si pude regresar a android 7.0
RLCircuit said:
Hola!
Aunque no lo he probado, es posible que puedas volver a la version que tenias anteriormente utilizando el mismo procedimiento que he explicado aqui. Si funciona (o no), me dejas saber! De esa manera actualizo la información que he escrito en el primer post.
Click to expand...
Click to collapse
Hice los mismos pasos, y gracias a Dios, pude volver a android 7.0
RLCircuit said:
Hello! Sorry for the late reply
I can confirm that the H873 KDZ files I mentioned in the first post work for the H872PR. Let me know if you need any help!
Click to expand...
Click to collapse
i was wondering if you could help me, i had an at&t variant h871 i converted it to h873 (oreo update) then i got greedy and went for pie official rom but converted my variant to h870k now wifi isn`t turning on niether the sim card is working and i can`t even go back to h873 or h871 cuz i`m getting this laf protocol not match error from lg up. here`s the ss can anybody please help me i`m new to all this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
brokboi said:
i was wondering if you could help me, i had an at&t variant h871 i converted it to h873 (oreo update) then i got greedy and went for pie official rom but converted my variant to h870k now wifi isn`t turning on niether the sim card is working and i can`t even go back to h873 or h871 cuz i`m getting this laf protocol not match error from lg up. here`s the ss can anybody please help me i`m new to all this
Click to expand...
Click to collapse
Hi how did u force update from h871 to h873 nad what partitions did u use? Your wifi problem is probably because u flashed the modem partition. Leave modem alone ,ull probably have to go back to the kdz that had wifi working for u then flash kdz for the other variant , just untick the modem partition. Please post updates.
Thanks for the guide, I have successfully converted H872PR to H873. First i updated to oreo then i updated to H873 PIE , H87330B
I found the Oreo firmware for H872PR H872PR20a_00_0404.kdz
is it okay to convert H873 back to H872PR?
RLCircuit said:
What you will need:
H872PR G6 (H871 and LS993VZA work too) running Stock Nougat
Click to expand...
Click to collapse
I know this is an old thread, but it applies to my situation.
I have an LG G6. IMEI guru says it's a H872PR, but the phone claims it is an H873. I bought it new/sealed and "unlocked" from an ebay seller. I am unclear on what is going on with the H872PR versus H873 thing.
It's running Nougat/7. (Quite well. I really like this phone.)
In the settings there is not an option to use VoLTE. My carrier tells me that due to the 3G networks being phased out (since I don't have VoLTE) the phone will stop being able to be a phone soon. (Not that big of deal, right? Who talks on the phone anymore? )
I can buy a new phone, but the whole thing about not being able to update really irks me. So that's why I am here!
I found Oreo/8 .kdz out there, and this thread is a good description of how to use LGUP to push them to the phone. With the risk of bricking out there, I am hesitant. If I push the Oreo/8 update, will I gain VoLTE? (Reading on here, there seems to be some problems with Pie/9.)
Thanks in advance!
Matt (long time lurker, new poster)
313-Matt said:
In the settings there is not an option to use VoLTE. My carrier tells me that due to the 3G networks being phased out (since I don't have VoLTE) the phone will stop being able to be a phone soon. (Not that big of deal, right? Who talks on the phone anymore? )
Click to expand...
Click to collapse
Update: LG Bridge works for my phone. (I know it doesn't for everyone.) Anyway I was able to use it to get to Oreo/8, and then Pie/9. VoLTE doesn't work for either. Oh, well. I tried.
-Matt

SKYW2006230OS00MQ1 is released!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is file.
Do you have OTA file?
Thanks so much!
Bhushantushar said:
Do you have OTA file?
Click to expand...
Click to collapse
read end of this thread(Here<- is file.)
It's for Black Shark Skywalker global? Can you tell me the procedure plz
carlosmara said:
It's for Black Shark Skywalker global? Can you tell me the procedure plz
Click to expand...
Click to collapse
1. Download and update the file with the name update.zip.
2. Place that file in storage/emulated/0/ota/update.zip
3. Dial *#*#1027#*#* and do accordingly.
Is anyone facing any issues after the update?
Does it void warranty or does it need any type of rooting and other stuff? Before installing or is ther any issues faced during update?
++++++ ota error(20) ++++++
Hi, I'm having an error, please help.
I already renamed the file to update.zip, and moved to "storage/emulated/0/ota/" folder.
when I hit "Local Update", it will have a note below my screen in red font: ++++++ OTA ERROR(20) ++++++
and when I hit "Pressure test switch", it will have a pop-up that says: The upgrade pakage list update_package_list or update_package_list_next does not exist.
I'm using BS2 Global.
my current version is: SKYW2005101OS01MQ0
do I need to update in another version before I can apply this OTA (MQ01)?
Thank you.
murcDF said:
Hi, I'm having an error, please help.
I already renamed the file to update.zip, and moved to "storage/emulated/0/ota/" folder.
when I hit "Local Update", it will have a note below my screen in red font: ++++++ OTA ERROR(20) ++++++
and when I hit "Pressure test switch", it will have a pop-up that says: The upgrade pakage list update_package_list or update_package_list_next does not exist.
I'm using BS2 Global.
my current version is: SKYW2005101OS01MQ0
do I need to update in another version before I can apply this OTA (MQ01)?
Thank you.
Click to expand...
Click to collapse
Hi. The ROM you're trying to flash is for the Global variant (S00). Your device is Global EEA variant (S01).
batuken said:
Hi. The ROM you're trying to flash is for the Global variant (S00). Your device is Global EEA variant (S01).
Click to expand...
Click to collapse
Ok bro, so hindi pala sya compatible.. sige, antay-antay nlng muna ako, sana maglabas din ng para variant ko..hehe salamatz!
murcDF said:
Ok bro, so hindi pala sya compatible.. sige, antay-antay nlng muna ako, sana maglabas din ng para variant ko..hehe salamatz!
Click to expand...
Click to collapse
Yep. Just wait for the official update. Kahit yung sakin S00, hindi ko to flinash. May tendency kasi talaga na nabrebreak yung OTA. And pansin ko rin sa updater, nag-iba sila ng server para sa updates.
All works great. Thanks
do I need to be root to make the upgrade?
I don't have rooted my bs2 and I can't access to the directory that you mention to store the update.zip file.
How much time is going to take the the phone download the upgrade automatically from the network.... I want to upgrade because I having problems with the mic is muted into the call when I plug or unplug a headphone or connect or disconect a bluetooth headphone....or if I change the audio source in any way the mic stop working and the person in the other side of the call can't hear me anymore.....
so please any sugestion to make the upgrade without root.....or how much to wait for the upgrade....
I don't want to root my phone....
You posted a thread previously where we can downgrade to Android 9. We can downgrade from this version also or need to go to MQ0 first?
alexdiaz73 said:
I don't have rooted my bs2 and I can't access to the directory that you mention to store the update.zip file.
How much time is going to take the the phone download the upgrade automatically from the network.... I want to upgrade because I having problems with the mic is muted into the call when I plug or unplug a headphone or connect or disconect a bluetooth headphone....or if I change the audio source in any way the mic stop working and the person in the other side of the call can't hear me anymore.....
so please any sugestion to make the upgrade without root.....or how much to wait for the upgrade....
I don't want to root my phone....
Click to expand...
Click to collapse
If your device doesn't have a folder named ota, there's no problem because you can just create it manually.
---------- Post added at 02:24 AM ---------- Previous post was at 02:24 AM ----------
Venus567 said:
You posted a thread previously where we can downgrade to Android 9. We can downgrade from this version also or need to go to MQ0 first?
Click to expand...
Click to collapse
Yes, you still can downgrade to Android Pie coming from this update. I have already tried it.
batuken said:
Yes, you still can downgrade to Android Pie coming from this update. I have already tried it.
Click to expand...
Click to collapse
Where is the setting to disable dual open application? I can't update to MP6. It shows some chinese words and Google translate says disable dual open application in setting but I can't find it. Can't post picture since it says need 10 post. Ok I decided to reset my phone, now the update succeeds. But new problem the update stuck at 0%. Tried waiting and restart but still always 0%. Nvm now it's working.
Overall, How is the update??
Is it better than Android 9??
I wanna try but don't know somewhere I am feeling I will go back to Android 9...Should I definitely give it a try?
ripiad said:
read end of this thread(Here<- is file.)
Click to expand...
Click to collapse
Can you please re-upload file! can't find it in thread.
ok..I do it
reporting.....I upgraded the phone and I have to report that all was ok, and yes the problem with the mic muted was fixed with this.... so I am happy with that....
The only thing that I would like is that the developers include the option to record the calls native.... I had this feature in my last xiaomi note, and I really miss it.... maybe is the only thing in the software that I don't like.... In hardware what I hate is the fact that don't have a 3.5mm audio output (I think that is a very bad decision in a GAMER phone)... I use the adapter with my headphones but is sad because I can't charge the phone or made a capture with hdmi because I using the port for the audio...
for hermanth
Overall, How is the update??
Is it better than Android 9??
I wanna try but don't know somewhere I am feeling I will go back to Android 9...Should I definitely give it a try?
Click to expand...
Click to collapse
I personally was lost with the android 9 (because I used a miui 11 with my last xiaomi so the upgrade make feel very confortable again I will recommend this upgrade).
for nijaardez
Can you please re-upload file! can't find it in thread.
Click to expand...
Click to collapse
I have troubles finding the file too.... the file link is in the first post of this thread just below the black image of Joy UI (there is a line of text that said HERE is file....just click in the word HERE is in orange color)
thanks to batuken for the help....in fact you can create manually a ota directory in the memory of the phone and then use de code to enter to upgrade menu (I use the steps of this link ( https://forum.xda-developers.com/black-shark-2/how-to/ota-update-a10-joyui-11-cn-version-t4039643 ) ... need to be patient i take about 10 mins or more all the upgrade .....sometimes take a lot of seconds in one determinated percent (like is freeze)...but just wait and let the phone upgrade ..... the first reboot after the update take a lot of time too....
best regards
Alex
batuken said:
Yep. Just wait for the official update. Kahit yung sakin S00, hindi ko to flinash. May tendency kasi talaga na nabrebreak yung OTA. And pansin ko rin sa updater, nag-iba sila ng server para sa updates.
Click to expand...
Click to collapse
Sir, safe po ba mag update via OTA. OS00MP6 to OS00MQ1, may officical rom na po na? Broken link kasi yung post ni wga0.

Stock ANE-LX1 Firmware for dload

Where could I find an UPDATE.app for the ANE-LX1?
I have looked everywhere. The websites with the UPDATE.app files are either too big for my SD Card,
or the cdn servers on that website are insanely slow.
Would anyone have a link for one of them?
If you can't put the file on your sdcard, make sure your card isn't fat32. Format it to exfat and you can transfer to it. Twrps have option to change file system but I didn't test it so do it with caution. Also use {Mod edit: Link removed} to find dload files. You can only use update.app or dload folder itself.
If you want to use dload folder, download the zip from androidhost. Inside the zip file there is a folder called dload, transfer this folder to your sdcard and trigger an update by holding vol+, vol- and power at the same time. Your phone should be off to trigger it and you should have erecovery in erecovery partition, not the twrp.
If you want to use update.app only, get update.app you want. In you sdcard create a folder named dload and put update.app inside that folder. Then trype *#*#2846579#*#* on your dialer. From the open menu select "4. Software Upgrade" > "1. Memory card Upgrade".
Frax3r said:
If you want to use update.app only, get update.app you want. In you sdcard create a folder named dload and put update.app inside that folder
Click to expand...
Click to collapse
Yes, it's possible on EMUI 5, not on EMUI 9.1, afaik.
-Alf- said:
Yes, it's possible on EMUI 5, not on EMUI 9.1, afaik.
Click to expand...
Click to collapse
Exactly. Even update_sd.zip cannot be installed solo, because the update package verification needs vendor hw_xx.zip.
But some people live in their own little world
Kids...
-Alf- said:
Niños...
Click to expand...
Click to collapse
Hola, quisiera consultar sobre una custom rom en stock para el p20 lite, y si se puede flashear desde fastboot, porque twrp genera muchos errores, solo he podido instalar gsi roms desde fastboot.
Dovaking1327 said:
Hola, quisiera consultar sobre una custom rom en stock para el p20 lite, y si se puede flashear desde fastboot, porque twrp genera muchos errores, solo he podido instalar gsi roms desde fastboot.
Click to expand...
Click to collapse
Oswald Boelcke said:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Click to expand...
Click to collapse
Hello, I would like to ask about a stock custom rom for the p20 lite, and if it can be flashed from fastboot, because twrp generates many errors, I have only been able to install gsi roms from fastboot. Sorry xD :C
Dovaking1327 said:
stock custom rom
Click to expand...
Click to collapse
What do you mean by that? Stock ROM or custom ROM?
-Alf- said:
What do you mean by that? Stock ROM or custom ROM?
Click to expand...
Click to collapse
stock based custom ROM like MorfuZ V4.0. Or what custom ROM do you recommend?
Dovaking1327 said:
stock based custom ROM like MorfuZ V4.0. Or what custom ROM do you recommend?
Click to expand...
Click to collapse
MorfuZ 4.5 is a good ROM, also you can try Openkirin Project.
-Alf- said:
MorfuZ 4.5 is a good ROM, also you can try Openkirin Project.
Click to expand...
Click to collapse
In the morphuz the links are down, unfortunately, and open kirin project too, I can't find a place to download them, in which case can I install them using emui 9.1? is that I could not downgrade, thank you very much and sorry for the inconvenience
Dovaking1327 said:
In the morphuz the links are down
Click to expand...
Click to collapse
Here you go
http://catuva21.blogspot.com/2018/06/morfuzp20.html?m=1
Dovaking1327 said:
open kirin project too
Click to expand...
Click to collapse
try again later
Dovaking1327 said:
in which case can I install them using emui 9.1?
Click to expand...
Click to collapse
You can only install MorfuZ on emui 8
Dovaking1327 said:
is that I could not downgrade
Click to expand...
Click to collapse
for what reason?
-Alf- said:
Aqui tienes
http://catuva21.blogspot.com/2018/06/morfuzp20.html?m=1
inténtalo de nuevo más tarde
Solo puedes instalar MorfuZ en emui 8
¿por qué razón?
Click to expand...
Click to collapse
Thank you very much, mainly for my Compilation, since I have it is the Ane.L03 C45E4R1P6T8, that is my compilation and I have not been able to downgrade because of that, I get an error when I use the only Firmware that I could get with that compilation.
Dovaking1327 said:
Thank you very much, mainly for my Compilation, since I have it is the Ane.L03 C45E4R1P6T8, that is my compilation and I have not been able to downgrade because of that, I get an error when I use the only Firmware that I could get with that compilation.
Click to expand...
Click to collapse
You can downgrade to Oreo only via HiSuite. If the rollback option is not available with your HiSuite ("switch to the older version" or "Earlier version"), you must downgrade to the lower Pie build version number doing the dload method (flashing Service ROM ). This process will erase your phone and lock your bootloader !
So try to install 9.1.0.134 via dload
{Mod edit: Link removed}
and then try downgrade to EMUI 8 using HiSuite .
-Alf- said:
You can downgrade to Oreo only via HiSuite. If the rollback option is not available with your HiSuite ("switch to the older version" or "Earlier version"), you must downgrade to the lower Pie build version number doing the dload method (flashing Service ROM ). This process will erase your phone and lock your bootloader !
So try to install 9.1.0.134 via dload
{Mod edit: Link removed}
and then try downgrade to EMUI 8 using HiSuite .
Click to expand...
Click to collapse
Ahhh perfect, I didn't know that, thank you very much, I have another question, I'm currently in GSI LIV, can I restore stock rom with Dload? or do I have to do it by downloading from Erecovery?
Dovaking1327 said:
Ahhh perfect, I didn't know that, thank you very much, I have another question, I'm currently in GSI LIV, can I restore stock rom with Dload? or do I have to do it by downloading from Erecovery?
Click to expand...
Click to collapse
Optional; the eRecovery method doesn't lock the bootloader, so it's easier.
-Alf- said:
Opcional; el método eRecovery no bloquea el cargador de arranque, por lo que es más fácil.
Click to expand...
Click to collapse
Understood, then I will carry out the steps to return to stock and downgrade, thank you very much, any situation I will write you again for the post, really thanks and sorry for the inconvenience
Dovaking1327 said:
Understood, then I will carry out the steps to return to stock and downgrade, thank you very much, any situation I will write you again for the post, really thanks and sorry for the inconvenience
Click to expand...
Click to collapse
No problem.
-Alf- said:
You can downgrade to Oreo only via HiSuite. If the rollback option is not available with your HiSuite ("switch to the older version" or "Earlier version"), you must downgrade to the lower Pie build version number doing the dload method (flashing Service ROM ). This process will erase your phone and lock your bootloader !
So try to install 9.1.0.134 via dload
{Mod edit: Link removed}
and then try downgrade to EMUI 8 using HiSuite .
Click to expand...
Click to collapse
Hello and good morning, @-Alf-
I've removed the link from your above post. androidhost.ru is not accepted as filehost on XDA!
Spoiler: Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Regards
Oswald Boelcke
Senior Moderator

Categories

Resources