It it safe for me to flash the 7.0 EUR-XX over the 234 o2 uk version to then change the firmware to open uk?
Yes! I've done it.
Related
Hi Guys,
My friend just got an X10i with Optus Firmware.
He uses Vodafone, so I was wondering if there is a Vodafone Australia Firmware out there to flash over the optus to enable OTA updates through Voda.
Omnius site only had Optus FW, no Voda Aus...
Any help would be great.
Thanks Heaps
Hi Folks,
I have a question regarding debranding / updating my S3 (4.1.2)
This is all new to me and with the wealth of information here and elsewhere online I'm a little unsure about the correct files to use.
My S3 was originally on O2 Ireland and it has been unlocked so I can use it on Vodafone Ireland.
The phone is on 4.1.2 and Kies and OTA firmware update both state I have the latest firmware.
So now curiosity has gotten the better of me and I want to manually update to 4.3, and while I'm at it, I want to debrand and just have a stock firmware.
Reading online says the Switzerland firmware is stock and bloatware free.
These are the details...
PDA: I9300XXUGNA5
CSC: I9300AUTGNA1
MODEM: I9300XXUGMK6
If I flash with these, is that all I need to do to debrand and have the latest firmware?
There is a 4.3 Vodafone firmware on Sammobile so I suppose I could use that if the Swiss one didn't work.
As a noob to flashing, ROMS, Odin etc etc I appreciate any advide or guidance.
Thanks
Ciaran
No stock rom is debloated, they all have tons of Samsung rubbish included.
Any firmware for the i9300 will work, just make sure the included modem will work in your country. Usually anything European is fine but you may lose OTA due to wrong CSC.
Current phone details are...
AP : I9300XXELLA
CP : I9300XXELLA
CSC : I9300O2IELL1
Hoping for some more advice!
How do I know if the csc is correct?
This is the Vodafone Ireland file,
I9300XXUGNA5_I9300VFGGNB1_VDI
and the (more generic?) Swiss file,
I9300XXUGNA5_I9300AUTGNA1_AUT
I know the Swiss file won't have any branding, but don't know if the modem and csc settings are correct.
The Vodafone one on the otherhand will have the correct settings but lots of VF bloatware and branding.
Hi guys I have just got my Samsung Galaxy edge and its branded to 02 UK and I am going to unbrand it I wanted to know which Stock should I flash BTU OR XEU also will I need to change the csc ?
Pretty sure XEU is Europe unbranded (including UK) and BTU is just UK unbranded, flashing one of those should set your CSC to the version flashed. I have always flashed BTU
Sammobile actually has XEU listed as Ireland, so prob best go for BTU http://www.sammobile.com/firmwares/database/SM-G925F/BTU/
Thanks MrC85 thats what I have done just flashed the United Kingdom BTU its all set now........Do you reckon I just get the android updates quicker now ?
x5rash said:
Thanks MrC85 that's what I have done just flashed the United Kingdom BTU its all set now........Do you reckon I just get the android updates quicker now ?
Click to expand...
Click to collapse
I guess so, I tend to root mine etc (or use a custom ROM). so have to flash updates manually.
all i see are vodefone uploads athttp://live.samsung-updates.com/ my question is:
my g925F is a NTL where is the update for us how much longer do we have to wait? can i upgrade using the xeu version?
there is the XEU update also,you can use that,and if you read a little bit,you don't had to ask this question....:good:
My g925F is a VIA o2 German, I have already installed VDF German FW and later XEU FW (No Branding) too, no known issues. That works fine,Knox 0x0
Hello Everyone
Is it possible to convert a gear s from SK Telecom To the Latest Turkey Firmware?
I tried via Odin but was Getting Bootloops so Had to Re flash SK Telecom again.
I tried going into recovery and do a factory reset but could not do that too.
Any Guide and help will be highly appreciated.
Regards
Suleman Talpur.
Mate 9.
I do it before with my Gear S
first time when i buy it, it's was on SK Telecom Firmware
But i flash XEO on it with no problems
Now am on the latest version OL2
......
Try to flash XEO first, if passed then flash Turkey Firmware
......
Best luck
The Watchbis Region Dependent and it did not accept The European Firmware but now its On Lateat Singapore International Firmware
Suleman Talpur.
Mate 9.
I flashed latest UK firmware, BOL2, without any problem...