SK Telecom To Any Latest Firmwate - Samsung Gear S

Hello Everyone
Is it possible to convert a gear s from SK Telecom To the Latest Turkey Firmware?
I tried via Odin but was Getting Bootloops so Had to Re flash SK Telecom again.
I tried going into recovery and do a factory reset but could not do that too.
Any Guide and help will be highly appreciated.
Regards
Suleman Talpur.
Mate 9.

I do it before with my Gear S
first time when i buy it, it's was on SK Telecom Firmware
But i flash XEO on it with no problems
Now am on the latest version OL2
......
Try to flash XEO first, if passed then flash Turkey Firmware
......
Best luck

The Watchbis Region Dependent and it did not accept The European Firmware but now its On Lateat Singapore International Firmware
Suleman Talpur.
Mate 9.

I flashed latest UK firmware, BOL2, without any problem...

Related

Looking for android 2.3.4 for my GT S5830

I cant find the firmware to flash with odin, most of them are taking me to hotfile but it was already deleted anyone can help me find the link?
You can find it in samfirmware.com
Enviado desde mi GT-S5830 usando Tapatalk
Stock Firmware S5830 - Different Versions
Hello All,
New here and was wondering why when installing different stock firmwares from Sam Firmware the website for my Samsung S5830 (this is for use in Latin America - Mexico), when installing let's say a European stock firmware which is newer than the stock firmware that Samsung release for Latin America (2.3.4 vs 2.3.5 or 2.3.6 or 2.3.7), using Odin it allows you to install the firmware that you are trying to use but it never boots up and keeps cycling through the booting images of Samsung and the logo. If the phone is flashed using the stock firmware for Latin America this does not occur at all. Procedure is run as suggested with the .ops file and the home.tar file but still does not work if you try to use European or any other firmwares.
Any clue on what could be the problem here?
Thank You
check if your GSM band frequency is same with those of Europe this could be causing the issue, or your phone is locked to a carrier.
zeppman1979 said:
Hello All,
New here and was wondering why when installing different stock firmwares from Sam Firmware the website for my Samsung S5830 (this is for use in Latin America - Mexico), when installing let's say a European stock firmware which is newer than the stock firmware that Samsung release for Latin America (2.3.4 vs 2.3.5 or 2.3.6 or 2.3.7), using Odin it allows you to install the firmware that you are trying to use but it never boots up and keeps cycling through the booting images of Samsung and the logo. If the phone is flashed using the stock firmware for Latin America this does not occur at all. Procedure is run as suggested with the .ops file and the home.tar file but still does not work if you try to use European or any other firmwares.
Any clue on what could be the problem here?
Thank You
Click to expand...
Click to collapse
After flashing new rom, try factory reset and wipe cache.
Sent from my GT-S5830 using Tapatalk
zeppman1979 said:
Hello All,
New here and was wondering why when installing different stock firmwares from Sam Firmware the website for my Samsung S5830 (this is for use in Latin America - Mexico), when installing let's say a European stock firmware which is newer than the stock firmware that Samsung release for Latin America (2.3.4 vs 2.3.5 or 2.3.6 or 2.3.7), using Odin it allows you to install the firmware that you are trying to use but it never boots up and keeps cycling through the booting images of Samsung and the logo. If the phone is flashed using the stock firmware for Latin America this does not occur at all. Procedure is run as suggested with the .ops file and the home.tar file but still does not work if you try to use European or any other firmwares.
Any clue on what could be the problem here?
Thank You
Click to expand...
Click to collapse
After flashing, wipe cache and data.

Looking for stock rom Claro Ecuador

Hello,
I'm looking for this stock rom :
Country/Provider: Ecuador - Claro
PDA: I9100UHKG7
CSC: I9100ECOKG1
Phone: I9100UHKG4
Version: Android 2.6.35.7 Gingerbread
PCODE: GTI9100LKLECO
HIDSWVER: I9100UHKG7/I9100ECOKG1/I9100UHKG4/I9100UHKG7
kernel version [email protected] #2
I have tried in several places including samfirmware.com with no luck.
According to CheckFus downloader and http://samsung-updates.com/device/?id=GT-I9100 there isn't an official ROM for Ecuador at the moment.
You can try a ROM for Chile (Claro) or Brazil (Claro or unbranded). Actually, you can try any ROM for samsung-updates.com (as long as it's for GT-I9100) because they'll all work with your phone and they all contain Spanish. As for Phone versions, they European ROMs are much better than the Latin American ROMs.
I am from Brazil (Claro) and I am using an European ROM (Nordic Countries, unbranded). It works flawlessly. Using Odin you can have it up and running in less than 3 minutes.
Hi Simonetti2011,
Well, my S2 came with that firmware preinstalled so I'm guessing it is another official firmware (probably from Claro Jamaica) modified for my country and carrier.
I'm using the Australian (UNBRANDED) XWLP8 (ics 4.0.3) without issues as well.
However in the event I want to sell it, I'd hope I could go back to the originial stock firmware.
I did take the precaution of doing a Nandroid backup, but I have read problems of restoring them. The safest way would be to flash the stock rom back.
So, thanks anyway, if you or anyone else gets your hand in that stock firmware, please do share.
EDIT: After your post, I decided to give it another try and find the firmware with CheckFus, but using the Advanced tab. Well, after entering the necessary data, IT FOUND the firmware! GT-I9100_ECO_1_20111005162240.zip (302MB). I confirmed it as well at http://fus.nanzen.se/, by entering the following data:
Model: GT-I9100
Product Code: GTI9100LKLECO
HIDSWVER: I9100UHKG7/I9100ECOKG1/I9100UHKG4/I9100UHKG7
So, now I have it, the original firmware for Ecuador, Claro carrier.

[Q] Flashing Galaxy S2 to ORO

Hi, I live in Romania and after I bought a Samsung Galaxy S2 I had the unpleasant surprise to see the phone has a Italian firmware (3Mobile.it - ICS 4.0.3) and CSC - HUI. The phone is unlocked and my Orange SIM works fine but can't change the CSC code .. only HUI is available. The question is if I want to flash the phone with an ORO - Orange firmware witch has ICS 4.0.4 will I encounter problems afterwards? Will the phone be locked on Orange?
You can flash firmware for any region you like. However, you may not be able to get OTA updates when they're released for your region anymore due to the different CSC. Simple solution to that is to flash future updates manually with Odin like many people here do anyways (you can always get the latest firmwares for country/carrier with Checkfus).

[Q] New Zealand CSC Question

Hey guys,
I have a New Zealand Samsung S3 GT-I9300.
It's got no branding on the phone, no logos, no logos on startup etc and I didn't buy it from a Telecom, 2 Degrees, or Vodafone store so I assume its unlocked. I bought if from an electronic store called **** Smith.
It's on the Telecom network - just chucked in my Telecom SIM.
OS - 4.0.4
AP - 19300XXALF2
CP - 19300XXLF2
CSC - 19300NZCALF1
At the moment when I plug the phone into Kies, it gives me the message "Your device's current firmware version is not supported to firmware via Kies".
After doing some research and troubleshooting steps like making sure Kies is up to date, reinstalling drivers etc I saw that some people said that if your CSC is wrong Kies won't upgrade your phone.
I realised that Jellybean hasn't been released for NZ yet but I figure that Kies should be saying something along the line of 'You have the latest firmware..' instead of saying its not supported.
So I was just wondering if my CSC looks fine for an unlocked NZ S3.
Let me know if you need any more information.
Cheers
My S3 is unlocked from Parallel on Vodafone NZ had the same CSC with no problems. I wouldn't worry about it much you can always flash via Odin.
If you are worried about it, flash the stock rom via Odin and use the BTU CSC that's what I've done, I have had no issues with it at all, and it's updated itself all the way up to 4.1.1 OTA with no problem.
Also, have you rooted the phone? If so it can report that you are unable to update via Kies
Taubin said:
My S3 is unlocked from Parallel on Vodafone NZ had the same CSC with no problems. I wouldn't worry about it much you can always flash via Odin.
If you are worried about it, flash the stock rom via Odin and use the BTU CSC that's what I've done, I have had no issues with it at all, and it's updated itself all the way up to 4.1.1 OTA with no problem.
Also, have you rooted the phone? If so it can report that you are unable to update via Kies
Click to expand...
Click to collapse
Thanks for your reply and advice
My phone isn't rooted.
BTU is UK right?
Couldn't I just change the CSC instead of flashing another ROM?
This will void warranty right? Don't really mind but just wondering out of curiosity.
Cheers
Mine isn't rooted either. You don't need to be in order to install the rom through Odin.
BTU is in fact UK
You can try to change the CSC first and see if that works, keep in mind it's going to wipe your phone when you do so.
It should not void the warranty, as you will still be using a default stock official rom, most people load the stock official when sending it in for repair work
By the way, the stock rom I used was the one listed here http://forum.xda-developers.com/showthread.php?t=1646610 from May 13th :
I9300XXALE8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXALE8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 13 May 2012
Modem: XXLE8
CSC: OXAALE8
Change List: 554452
I then accepted OTA updates on the phone directly to get it up to the current rom
Taubin said:
Mine isn't rooted either. You don't need to be in order to install the rom through Odin.
BTU is in fact UK
You can try to change the CSC first and see if that works, keep in mind it's going to wipe your phone when you do so.
It should not void the warranty, as you will still be using a default stock official rom, most people load the stock official when sending it in for repair work
By the way, the stock rom I used was the one listed here http://forum.xda-developers.com/showthread.php?t=1646610 from May 13th :
I9300XXALE8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXALE8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 13 May 2012
Modem: XXLE8
CSC: OXAALE8
Change List: 554452
I then accepted OTA updates on the phone directly to get it up to the current rom
Click to expand...
Click to collapse
Thanks for that!
I'll give that a go.
Thanks
Just by coincidence my phone updated to Jellybean 4.1.1 via OTA a few days ago without me having to flash another stock ROM on it.
Also, Kies now reports that I have the latest firmware.
Looks like all I had to do was be a bit more patient.
Everything seems to be in order now.
Cheers for your help anyway guys.

Need some help with unbranding

Hi guys I have just got my Samsung Galaxy edge and its branded to 02 UK and I am going to unbrand it I wanted to know which Stock should I flash BTU OR XEU also will I need to change the csc ?
Pretty sure XEU is Europe unbranded (including UK) and BTU is just UK unbranded, flashing one of those should set your CSC to the version flashed. I have always flashed BTU
Sammobile actually has XEU listed as Ireland, so prob best go for BTU http://www.sammobile.com/firmwares/database/SM-G925F/BTU/
Thanks MrC85 thats what I have done just flashed the United Kingdom BTU its all set now........Do you reckon I just get the android updates quicker now ?
x5rash said:
Thanks MrC85 that's what I have done just flashed the United Kingdom BTU its all set now........Do you reckon I just get the android updates quicker now ?
Click to expand...
Click to collapse
I guess so, I tend to root mine etc (or use a custom ROM). so have to flash updates manually.

Categories

Resources