Hello there,
First of all I didn't found any thread about full phone film protection here, so if there is anyone who uses please share your opinion.
I ordered Clear Coat for my brand new Pixel (witch is currently waiting for me under Christmas tree). To be honest I'm a bit sceptical about this kind of solution, because I never used this kind of phone protection. In the other hand I used cases made of TPU or silicone and phone screen still gets broken while using it. Therefore I want to try this. Moreover it gives better grip also to phone and it's electrostatic. Probably it will arrive 27th of December.
As we can see on movie material this protection is a few elements thin layer which should protect whole phone from any scratches. The fat guy talks about "getting 50-times stronger impact protection" from regular plastic case - to be honest, it doesn't sound legible. Maybe he means just the protection films only. ...And it should stay on phone for two years...
Here's website:
https://www.clear-coat.com
Here some videos:
https://youtu.be/rVMg9eonb6I
Some info + placing:
https://youtu.be/uRK87YiKd10
Professional placing:
https://youtu.be/76o7BGbkNAA
Official:
https://youtu.be/VgNfJlYU9F4
Scratch test:
https://youtu.be/4n_-O6S-pYg
Wys?ane z mojego Nexus 5X przy u?yciu Tapatalka
basically a soft skin which requires wet application, same as skinomi.
since it's soft, scratches don't show as as easily and has some form of "self healing" properties. It was all the rage when these type of skins first came out, with claims such as this is what the military use to protect their helicopter blades etc.
these are also more grippy than the glass or PET screen protectors.
electric0ant said:
basically a soft skin which requires wet application, same as skinomi.
since it's soft, scratches don't show as as easily and has some form of "self healing" properties. It was all the rage when these type of skins first came out, with claims such as this is what the military use to protect their helicopter blades etc.
these are also more grippy than the glass or PET screen protectors.
Click to expand...
Click to collapse
Hmmm normally I'd agree but they claim the fusion has drop protection. How?
km8j said:
Hmmm normally I'd agree but they claim the fusion has drop protection. How?
Click to expand...
Click to collapse
Still whating for package... Yeah... How ?? Didn't found any drop tests on yt.
I got this for one of my older phones. I couldn't put it on properly. Bubbles everywhere, wrinkles too. It's not the easiest protection solution to put on. But if you got it right, it does look good and protects your device from scratches really well.
It would be helpful if you can make a quick review when you receive and got it installed
Oh I like it. There's a kiosk about 45 minutes away that offers professional installation. If I get time I'll get one. In the meantime, please keep us posted on ease of installation and satisfaction with the final product.
Edit: So I'm on the Pixel page and I don't see the clear coat, only the Reel Feel and Dress Code. Did you find the clear one on their site or elsewhere?
http://www.moutfitters.com/clear-coat/original/google-pixel
Think this is what you are looking for.
So for now i havr to say that installation of this coat is quite difficult. Layers are cutted properly with 0,5mm space on edges.
With package you get application solution (around half of the bottle) and no cloth. The biggest difficult is to get phone free of fibers and dusts. After hour or two after placing coat on phone I've been so disappointed of result that I almost taken it off... In next hours there cam some bulbs under it and goes off, in the end there are only bulbs where is some dust or small fibers.
About the bubbles in places where wasn't any dust under it - after 24 hours they disappear, as well as glue smudges witch came after few lifts up.
This material have some kind of self healing capabilities. It is some kind of silicone in feeling. And it gets fully transparent after 24 hours.
Currently got few 0,2-0,5mm bulbs under screen cover and 1 or 2 under back glass panel
Even on rounded corners it keeps well and it not coming off easily. Also small pieces around the buttons and connectors are not coming off.
It gives a bit better grip to phone but also a bit of thickness in feeling (it's not thick I only mean that you feel like touching by 1-2 mm glass). It has nice glare wet impression. There is no issues with touch screen - same sharp interaction. Currently it looks to be scratch proof bad because of silicone layer a bit more drop vibrations absorbent, bit for me it doesn't look to be drop proof.
But... There are few issues.
1) The application solution is small amount they it is enough only for placing every piece twice. If you do it wrong you have no more solution.
2) Phone has to be sterile to do that. Application is pretty tough, I would advise if any of you will buy it to give it with phone to some professionals.
3) Touch feeling of it is something between better grip and bit of oiled warm surface (yeah I know how the oiled surface can have better grip... But this is what it is).
Maybe later I will post some pics
Wys?ane z mojego Pixla przy u?yciu Taptalka
Related
Hi all,
searching for an invisible, thin protection film for my Topaz I found this website
http://www.gadgetshieldz.com/htc-to...s-screen-protectors-covers-cases-shields.html
It is exactly the same shield you might know from other manufacturers, but look at the price: 6.99 and free shipping included!
To make it short: Delivery was fast, the product is excellent (I have one of those expensive ones on my iPod so I can compare), and the installation is very easy. They even have an explaining video on their website.
I can recommend this product to everyone.
Greetz
ottoben
Hehe.. the fact that they refund to whoever who posts reviews abt them online...
wondering if these reviews are genuine or not.
No offence ottoben.. I'm just thinking out loud. I got my Shieldz too.. Pics here:
http://forum.xda-developers.com/showpost.php?p=4116914&postcount=194
MasK said:
Hehe.. the fact that they refund to whoever who posts reviews abt them online...
wondering if these reviews are genuine or not.
No offence ottoben.. I'm just thinking out loud. I got my Shieldz too.. Pics here:
http://forum.xda-developers.com/showpost.php?p=4116914&postcount=194
Click to expand...
Click to collapse
It's ok to me to say what you think. But I really think their product is as good as the much more expensive ones and that's what I wanted to share. BTW I dit not apply for the refund...
I have these too, and have found them excellent, however, the screen protector part is a little too "rubbery" for my taste - I feel that my fingers don't slide about as easily on the screen, therefore, I use the gadget shieldz for back and sides of the device and the standard HTC screen protector on the front - gives me best of both worlds IMHO
Ordered now - lets see when it turns up and if it's any better than the InvisibleShield...(that was rubbish tbh)
adesonic said:
I have these too, and have found them excellent, however, the screen protector part is a little too "rubbery" for my taste - I feel that my fingers don't slide about as easily on the screen, therefore, I use the gadget shieldz for back and sides of the device and the standard HTC screen protector on the front - gives me best of both worlds IMHO
Click to expand...
Click to collapse
Yup.. exactly. I tested my friend's Cruise too, with the screen covered with it too. Totally unacceptable for me on the screen. Using a stylus makes it much worse.. so I applied it on the back only.
My friend's Cruise apparently had Invisible Shield.. and I think the rubbery-ness is about the same. I do however feel that GadgetShieldz has less wavy effect, thus, it looks better
Price-wise.. forget IS. Ya don't need the fancy packaging, spray bottle or a card. GS is worthit.
My feedback for gadget shieldz
MasK said:
Yup.. exactly. I tested my friend's Cruise too, with the screen covered with it too. Totally unacceptable for me on the screen. Using a stylus makes it much worse.. so I applied it on the back only.
My friend's Cruise apparently had Invisible Shield.. and I think the rubbery-ness is about the same. I do however feel that GadgetShieldz has less wavy effect, thus, it looks better
Price-wise.. forget IS. Ya don't need the fancy packaging, spray bottle or a card. GS is worthit.
Click to expand...
Click to collapse
After seeing Mask post from another thread on the matt cover, i had order and using gadget shieldz now...
I had Invisiable shield on my previous Diamond 1.
Overall, i feel gadget shield is thinner than Invisiable Shield.... better feel, less rubbery....
but on gadget shield seems easier to be srcatch or stretch...
i had some stretch mark when i try hard to push the air bubbles.
This stretch marks is ugly as it is on the front screen area....
Just have to be extra careful during application of the shield
I also got the gadget shield, but my main problem is that it is about 2mm off on all sides. So I have small gaps between the pieces. Does invisible shield have the same problem?
supreme_one333 said:
I also got the gadget shield, but my main problem is that it is about 2mm off on all sides. So I have small gaps between the pieces. Does invisible shield have the same problem?
Click to expand...
Click to collapse
You mean 2mm smaller than the device? I though that's normal..
I only applied at the back, so it's not a problem for me..
so does anyone who has tried out invisibleshield have problems with it not fitting perfectly because if it doesn't have problems I might buy one.
Gadgetshieldz
Hi all,
Just got my Gadgetshieldz this morning. The instructions are pretty good, easy to follow. However, for the pieces that fold over the sides, they don't stick well. The plastic is too rigid and won't fold and stick. I ended up with only the front screen and the backing done. I couldn't be bothered with the sides as they were too fiddly and weren't a perfect fit anyway. The opening near the speaker on the right wouldn't stick properly and am currently sitting hte phone on its side hoping that portion would stick when its dry. Overall, Gadgetshieldz looks like a good cheaper alternative to Invisible shield, (I tried tearing apart the smaller strips and they were quite robust) but usage on the diamond is really average. From what the others have said, I will most likely be tearing off the screen protector and buying another replacement if there is too much traction. Will make another post when it dries.
Cheers.
Jeremy
Gadgetshieldz
supreme_one333 said:
I also got the gadget shield, but my main problem is that it is about 2mm off on all sides. So I have small gaps between the pieces. Does invisible shield have the same problem?
Click to expand...
Click to collapse
I concur on this one. I just installed Gadgetshieldz on the weekend. The battery cover portion has unsightly gaps at the top. The strips that are meant for the sides are way short and I didn't even bother applying them. Am probably gonna strip off the protection sheet and stick to a soft plastic case. They are a bit chunkier but more rigid than the silicone versions.
To anyone who gets air bubbles under screen protectors; URDOINITRONG.
Ensure the surface of both the device and the protector are COMPLETELY dust free; The smallest particle of dust, fluff, or hair will make an air bubble a good 3 or 4mm in diameter.
Other than that, ensure the edges line up straight and roll down from one side to the other. Seempulz!
I'd recommend GadgetShieldz.com.
£3.00 delivered and does the job well.
dg
I bought one as well and fits perfectly. But installation made me crazy some pieces are too small for my fingers
Gadgetshieldz is looking like a great option to me..Ordering one now..Will see how it goes.
The following will run through the experience of the installation process and comparison with EXiM PET dry install screen protectors and Wrapsol Wet apply body protection.
(Reportedly, Zagg is also similar to Skinomi)
Type:
Installation: WET
Light Permeability: High (ultra clear, glossy)
Prior to Installation:
The protector material is packaged in a tube. Opening the package cap reveals a rolled up screen protector, an instruction guide, squeegee and spray solution. The protector was unrolled and flattened for several days prior to installation.
Installation:
bathroom was steamed up to settle the dust, the screen was cleaned with a mircofibre cloth dipped in 99% Isopropyl.
Compressed air was used to blast off any dust particles on the screen
The protector material was peeled and sprayed with solution
The protector material is elastic / stretchy.
-If my experience with Wrapsol's body protection material that was also stretchy is any indication, caution must be used during installation to avoid accidental excessive stretching which caused permanent deformation of the material. Once the material is over stretched, the holes, edges, etc will be unaligned, rendering the protector useless.
-There is no stretchiness with EXiM PET or any dry install screen protectors
Installation took a few tries before perfect alignment was achieved.
-on several occasions when I tried to realign one part of the screen protector (hoping the rest of the material would follow as with ridged dry PET protectors), the material would instead stretch, so I had to lift the whole screen protector for alignment to avoid stretching and deformation.
After alignment, I used a micro cloth to push all the solution (which is hopefully demineralized to prevent electrical conductivity)
-a micro cloth was used instead of the squeegee provided to minimize damage to the overly soft protector material.
-the material is dentable even with mere accidental stab of a finger nail (not so with ridged dry install PET protectors).
I noticed it's almost impossible to see remaining dust specs due to under lying liquid solution, so you'll just have to hope you did a good job of cleaning prior to installation
First day of application:
-Foggy screen (reportedly disappears after a few days)
-Dented protector (the material is too soft and is pretty much useless to protect itself) (unless this characteristic ALSO disappears and becomes hard material in a few days..., can't recommend)
Second day:
-Majority of the fogginess from the microbubbles have disappeared, a minority of it remains, ~2% of the screen
-material remains soft and malleable
-one dust spec found
Fourth Day:
-Several dents on the screen protector remain from the installation process and more will come from even the slightest impact of a pointy object.
-This material is simply too soft. It is a poor choice of material if longevity is the aim of the protector.
-all microbubbles disappeared
--------------------------------------------------------------------------
This stuff is a joke.
the EXiM PET protectors are half the price and twice the quality.
I used to have a manually modified Apple IPAD EXiM PET protector installed for their lack of the Transformer version available on eBay for $12. Now I can tell the EXiM is definitely better both in installation process and usability.
Light permeability might be a little better with this Skinomi protector as it is thinner than the PET dry install protectors. But I can not be completely sure. I am comparing an old PET installation with weeks of accumulated finger prints and other grime to a brand new installation of Skinomi. So the comparison isn't on equal footing.
PROs:
high light permeability, thin
more Fingerprint resistant (more so than Dry Apply EXiM)
CONs:
difficult installation
-hard to realign (due to stretchiness, requires total lift of material for realignment)
-stretchiness (prone to accidental deformation during installation)
-difficult to see dust specs until a while after installation due to necessary spray solution
poor usability on 1st day post installation (delay in fog dissipation)
poor longevity (soft material very vulnerable to dents and scratches)
-extremely vulnerable to vinegar (cause permanent blur smear)
-extremely vulnerable to isopropyl (cause permanent blur smear)
RECOMMENDED?: No
I just bought my Eee Pad Transformer about two weeks ago and finally got the keyboard dock with it also. I also got this purchase on the Skinomi Screen Protector but has yet to arrive to my doorstep but thank you for the review. I'll see if I want to to test this on my Eee pad Transformer.
Thanks again for a good detailed review.
klau1 sorry if the Skinomi didn't work out for you. The vulnerability to dents is one of the problems I have with it, but I can live with it. Thanks for the review. Oh well if anyone else need a video how-to I have made one below for reference.
http://youtu.be/vWj9Uss65cQ
I would add to the cons... getting the thing off after you've had it on for a few weeks is ridiculous... I thought I was going to break the damn screen. To me that's just unacceptable. I replaced mine because where it touched the dock, the surface marred... agreed that this is crap.
I did end up buying this one on amazon and am very happy http://www.amazon.com/Transformer-P...1?ie=UTF8&s=electronics&qid=1309202152&sr=8-1
Easy to install, no fingerprints, cuts the glare, and easy to lift up with scotch tape and remove any dust deposited during install.. and it's not that expensive.
lopan said:
I would add to the cons... getting the thing off after you've had it on for a few weeks is ridiculous... I thought I was going to break the damn screen. To me that's just unacceptable. I replaced mine because where it touched the dock, the surface marred... agreed that this is crap.
I did end up buying this one on amazon and am very happy http://www.amazon.com/Transformer-P...1?ie=UTF8&s=electronics&qid=1309202152&sr=8-1
Easy to install, no fingerprints, cuts the glare, and easy to lift up with scotch tape and remove any dust deposited during install.. and it's not that expensive.
Click to expand...
Click to collapse
Usually Matte ones that cut glare, also cut contrast or clarity. How does the picture quality compare with the Skinomi ?
lopan said:
I would add to the cons... getting the thing off after you've had it on for a few weeks is ridiculous... I thought I was going to break the damn screen. To me that's just unacceptable. I replaced mine because where it touched the dock, the surface marred... agreed that this is crap.
Click to expand...
Click to collapse
Did you try to put a mild soap solution on the protector before removing it? It might help get it back to becoming more flexible.
klau1 said:
Usually Matte ones that cut glare, also cut contrast or clarity. How does the picture quality compare with the Skinomi ?
Click to expand...
Click to collapse
I have one of these from posr.us. Really does cut on the glare, but is not very smooth on the fingers and also reduces clarity/contrast like you mentioned.
I think I am still going to try the skinomi.
THIS SH*T IS A JOKE and SCAM!!!
Use a bit of rubbing alcohol or 99% isopropyl and it blurs over.
There is now a blotch of blurriness on the spot I briefly rubbed with the alcohol and quickly stopped.
DO NOT BUY!
klau1 said:
THIS SH*T IS A JOKE and SCAM!!!
Use a bit of rubbing alcohol or 99% isopropyl and it blurs over.
There is now a blotch of blurriness on the spot I briefly rubbed with the alcohol and quickly stopped.
Click to expand...
Click to collapse
This also happened to me - don't use anything other than a mild vinegar solution to clean the screen w/ this protector on it or else you'll get this blur/white patch effect - it ruins the entire screen protector.
Great review, thanks lots of useful information.
I got the silver carbon fiber back from skinomi and I love it. It makes the back of the TF look so cool. I only installed the back because I didn't like the pieces for the side and stuff. I kept the screen protector for future use because I got a SGP anti-glare protector which I love also. The finger prints just disappear, well almost lol.
I couldn't disagree more with this review. My skinomi went on without any problems and looks great, can't even tell there is a protector on it.
How on earth do you get 'dents' on it during installation is beyond me......did you put it on with a knife and fork? There are many reviews and installation videos showing how easy it is and how good the skinomi looks when installed properly.
klau1 said:
THIS SH*T IS A JOKE and SCAM!!!
Use a bit of rubbing alcohol or 99% isopropyl and it blurs over.
There is now a blotch of blurriness on the spot I briefly rubbed with the alcohol and quickly stopped.
DO NOT BUY!
Click to expand...
Click to collapse
UPDATE:
CAUTION
ANOTHER Blur smear created by SubWay's (TM) Sweat Onion Chicken Terriakyi sub.
I was eating a sub when I accidentally made contact between the sub and the skinomi protector screen, some "sweet onion sauce" was smeared on the screen, when I wiped it with a napkin, ANOTHER blur was left behind just like with the isopropyl.
so even light vinegar will ruin this piece of crap.
I got the Skinomi for its full body skin... of course im already using something else as a screen protector...
thanks for the update!
would love to read anyone else's reviews on this product!
Added:
After weeks of usage, it's proven to be:
Pro:
more Fingerprint resistant (more so than Dry Apply EXiM)
I bought two for my gtab....the first one had a deep scratch in it right out of the box and the second one went on like crap. I also see what appears to be bubbles in the material in spots.
you can pretty much just duplicate this review for the bodyguardz ultra clear screen protector. the same rolled up packaging. the same pain in the ass installation with alignment issues(although this isnt their fault ill admit.) i did the same tactics minus the cleaning with alcohol before hand and after a week I still had these ugly " blotches" on my screen. after a week. emailed bodyguardz and the rep said it was from lack of solution used. thats funny because i used 2 vials of the solution. ( i had one left over from my phone screen protector) anyways, i think im just gonna rock the tab without a screen protector. i have a decent case which it never leaves, i should be good.
while the Zagg is similar in installation i never had any of the problems you had installing it. The zagg doesnt come in a tube its flat out of the box. i Swear by the zagg, i have installed it on 4 iphones , a n1, ipad, Inspire 4g and now my transformer. while the zagg stretches ever so slightly you shouldnt be pushing so hard on it with the squeegee thiers is a rubber squeegee and works great. The Zagg also allows alot of light to come through and seems almost as good screen clarity as if it wasnt on. It cleans easily and resist finger prints, i have never noticed any denting either with the Zagg.
^ if you can confirm that the zagg doesnt have the " orange peel" feel on the transformer screen protector i will order one right now.
Iirc, zagg will yelow over time, and it is thicker so might result in lower light permeability
I found this review of the Nilkin case for the Xperia P helpful, and wanted to give back by posting a review of my own. Had been pretty keen on the Nilkin case myself, but after reading the reports of the corners cracking, I went looking for another quality option and ended up with a Rock Quicksand. This is a "dark grey" model I bought from Casesss.com.
Note the white specks that appear on the case are bits of dust/fluff that aren't part of the case surface - sorry for overlooking these but they didn't look that visible while taking the pics, and it'd be too much of a pain setting up my tripod and lighting again to redo them nicely with my crappy camera. Also note the pics convey a sort of "white speckliness" overall which is not how it looks in person - IMO, the case looks better than it appears in the pics.
First, the positives:
- The material is really nice. It looks and feels classier than silicone or textured plastic.
- With moist/sweaty hands, the case provides more grip than the smooth metal surfaces of the phone.
- It allows the phone to sit more securely on your lap or a nearby surface (e.g. train/bus seat) with less fear of it sliding off and onto the floor.
- The cutouts are accurate, and there's plenty of clearance left around the headphone jack.
And the cons/caveats:
- With dry fingers, the material is actually less grippy than the phone's smooth metal surfaces.
- Some reviews of Rock Quicksand cases for other phones suggested the material doesn't grip pocket liners - I disagree. It's not a problem with big/loose pockets on cotton pants, but in more constricted front jeans pockets, it will tend to pull out the pocket liner when removing the phone. Still, it's not as bad as silicone in this respect, and doesn't retain nearly as much fluff/dust as silicone.
- The cutout for the transparent bar is much smaller than one on the Nilkin case. This probably increases the case's strength but doesn't look as cool.
- The buttons are a bit harder to press than without the case, but this seems unavoidable - the cutouts appear as non-intrusive as is possible for this style of case.
Overall, I'm very happy with the case for the purpose of providing extra grip in the situations I most need it and providing some protection, without making the phone look ugly. Would be happy to answer any questions in case I missed anything.
I am also using this product. Very good case.
Sent from my LT22i
can one get it online?
The thin band over the camera volume keys power sim speaker.. tend to brake soon... that's the only thing i don't like... and its very often due to the case's rigid body..
Else i highly recommend it... I am currently using an Soft Silicon-Jelly Case.. for an local manufacture..
Adityagrao said:
The thin band over the camera volume keys power sim speaker.. tend to brake soon... that's the only thing i don't like... and its very often due to the case's rigid body..
Else i highly recommend it... I am currently using an Soft Silicon-Jelly Case.. for an local manufacture..
Click to expand...
Click to collapse
Screenies please?
Following up with something I just observed today: at the bottom right corner, the "sand" material has rubbed off, leaving a shiny surface. I've been using the case for about a month and I'm not sure when this occurred. That corner isn't exposed to repeated friction against anything, so it seems as though a one-off contact with something probably caused it.
rogue operator said:
Following up with something I just observed today: at the bottom right corner, the "sand" material has rubbed off, leaving a shiny surface. I've been using the case for about a month and I'm not sure when this occurred. That corner isn't exposed to repeated friction against anything, so it seems as though a one-off contact with something probably caused it.
Click to expand...
Click to collapse
I use this case and this appears to be a problem that arises over time. I keep my phone in my pocket and over two months the edges have lost a lot of sand coating. It doesn't affect the usability of the case but can look pretty ugly. I can't take a photo now but will post one soon.
Another notable thing about this case is that if you have a creaky bottom cap from removing the cap too much, this case will hold the cap securely in place and stop the creaking.
EDIT: Here are some photos of the quicksand peeling. The lighting isn't great but you can see it clearly enough.
http://i.imgur.com/816DFkO.jpg
http://i.imgur.com/1OEzJkd.jpg
peeled too much... which casing can on get or leather pouch?
Zap_12100 said:
I use this case and this appears to be a problem that arises over time. I keep my phone in my pocket and over two months the edges have lost a lot of sand coating. It doesn't affect the usability of the case but can look pretty ugly. I can't take a photo now but will post one soon.
Another notable thing about this case is that if you have a creaky bottom cap from removing the cap too much, this case will hold the cap securely in place and stop the creaking.
EDIT: Here are some photos of the quicksand peeling. The lighting isn't great but you can see it clearly enough.
http://i.imgur.com/816DFkO.jpg
http://i.imgur.com/1OEzJkd.jpg
Click to expand...
Click to collapse
uhm very bad....did you go tu the beach or something???
I used to use this case and yes, it's beautiful at first but after a long time of using, it become ugly and i must change another one =.=
i wish i can find one of those in Egypt ,
I also got one of this case but mine is purple and the rubber of some place on the casing have lost but between it's a nice case I'm happy with it.
After just over three months use, I can report the "sand" has now rubbed off the rear corner adjacent to the one I pictured on the previous page (that one hasn't gotten any worse since the picture was taken). The three other front corners also show the same sort of wear, but smaller. The edges and larger surfaces show no signs of wear.
In my case, it seems most likely the wear is being caused simply by the phone rubbing against the pocket liner when in my jeans/jacket pocket, so it's not a very durable surface. With just the corners worn, mine still looks classier overall than other cases and I'd just as soon choose it again over the alternatives, but I can't recommend it to those whose phones are treated less softly than mine, as it may end up looking like crap in a short period.
Very usefull case it is..:good: protects the device very well....
I have a quicksand case for my Xperia Sola. I just got it a few months back and so far I'm quite happy with it. The overall build quality seems to be very robust. However on two corners the rubber starts to come off, but that doesn't really bother me as long my phone is save
i haven't use case for a yeah and now my XP look like old phone :cyclops:
is the available for xperia go?
GGG
I've had my Mist Blue XC for less than 3 days. I've done nothing but lay it on flat surfaces being very careful with it until a case I ordered arrives. Now I noticed there are a ton of fine scratches on the back of the phone.
Brilliant move choosing to use glossy plastic on this thing, Sony...
Sorry to hear that, what case did you order ( link please) are there any third party cases , beside the original ones ?
Can you please post photos of the scratch? Probably have to use screen protector on both sides. And then use a case
Hard to shoot the scratches. They are really fine scratches on the gloss coat I assume.
I ordered this cheap case on Amazon until something better comes out.
https://www.amazon.com/Xperia-Compa...a+x+compact+case"&refinements=p_85:2470955011
Strange , the link you posted is states" X Compact Case" but the pictures are from the Z5 compact Ringke Fusion
andysoft83 said:
Strange , the link you posted is states" X Compact Case" but the pictures are from the Z5 compact Ringke Fusion
Click to expand...
Click to collapse
Pictures have been updated on the item now. Doesn't look like the previously advertised case (top and bottom edges are open). I ordered one, and I'm not impressed the item changed.
Yeah, Not happy they changed the images but it will do until something better comes out.
uchosen said:
I've had my Mist Blue XC for less than 3 days. I've done nothing but lay it on flat surfaces being very careful with it until a case I ordered arrives. Now I noticed there are a ton of fine scratches on the back of the phone.
Brilliant move choosing to use glossy plastic on this thing, Sony...
Click to expand...
Click to collapse
yeah... it does seem to scratch rather a bit too easily. At least (so far on mine) the screen doesn't have the same scratchability as the back:fingers-crossed: . Maybe sony will release some carnauba based polish when support folks start suggesting that the little fine scratches will just buff out...
so anyone could get a glass panel for the back of this phone? anything to put there might do the job actually
Glossy plastic is highly underrated. It looks good and is light and cheap. Won't shatter like glass, less slippery than metal, and the inevitable scratches are...quickly and cheaply repaired to bring the surface to like new condition. How? take a minute to apply a little wax polish with a soft cloth and rub until dry.
I have used Novus Fine Scratch Remover (#2), but I would think car wax would work just as well. I removed some marred patches from when I dropped the phone on hardwood floor and it skidded a bit, and not only did those patches disappear, but so did the fine scratches.
I don't think this would be wise for the screen, however, as it would probably harm the oleophobic coating.
This is why I put stickers on the back (and eventually sides) to protect the phone, and also make it less slippery in my hands, you can see some photos here:
https://forum.xda-developers.com/showpost.php?p=74286145&postcount=7
Hey guys,
Thought I'd share my experience with this screen protector.
I've tried damn near all available on the market (tempered glass specifically) except the official OnePlus tempered glass. None were up to par. They all only have adhesive along the edges only which imo is a poor desicion. I see no plus to this.
The ones i tried all got dust under in a matter of days, and some even fell off completely after small drop tests.
Although this spigen is not a tgsp, it's is worth every penny. Application was easy, the wet application makes it to where alignment is 99 percent perfect. It covers at least all of the lighted display, of course it doesnt follow the 2.5d curve.
After application it took a couple hours to clear up any haziness that remained after squeegee/drying process. Don't apply too much pressure as I seem to have wrinkled a corner.
All in all, very satisfied with the product and will continue to buy after they get ugly...unless they make a perfect tgsp im the future.
Link: https://www.amazon.com/gp/aw/d/B074...+5+neoflex&dpPl=1&dpID=516YABFlNoL&ref=plSrch
MrWilsonxD said:
Click to expand...
Click to collapse
Edited. My bad.
cesar.mk4 said:
Edited. My bad.
Click to expand...
Click to collapse
. all good! Going to try one of these when I get paid!
MrWilsonxD said:
. all good! Going to try one of these when I get paid!
Click to expand...
Click to collapse
It's pretty much the same as the one comes pre-installed on the device.
Hoe does this protector goes with dust? Not underneath, bit on top? The pre installed protector is a real dust catcher ...everything I get the phone out of my pocket I have to clean the screen from dust
Caspertje19 said:
Hoe does this protector goes with dust? Not underneath, bit on top? The pre installed protector is a real dust catcher ...everything I get the phone out of my pocket I have to clean the screen from dust
Click to expand...
Click to collapse
Its far less of a dust/lint magnet. Id say 80 percent less attraction.
I just bought this protector as well, and installed it today.
It is exactly the same size as the pre-installed protector, which personally I like. That avoids issues with the curved screen, but is still large enough to protect the screen adequately when using a case. Of course the second benefit is that this is a case friendly screen protector. I have a cheap black TPU case similar to the spigen rugged armor, and they fit together without issue.
This is one of those healing/indestructible type protectors that have been around awhile, like an IQ Shield. I have used these on older devices, although I upgraded to TGSP on my last phone. I would have bought a TGSP for this phone, but apparently, the manufacturers have no clue what they're doing. I do like this type of protector. It is a wet application. This protector makes the screen appear slightly textured when viewed from extreme angles, but not much viewed straight on. I need to give it a full day to dry before I get too critical of it. The package came with two, and I'm likely to use these until a decent TGSP rolls around.
jjesusfreak01 said:
This is one of those healing/indestructible type protectors that have been around awhile, like an IQ Shield.
Click to expand...
Click to collapse
Yup, forgot to mention that. Still don't have any cosmetic problems with the film. Even the wrinkle I mentioned in the first post has corrected. I can actually see the film "heal" when I scratch it with my nail intentionally.
1 day followup: All the bubbles have disappeared. There is still very mild visible distortion that is present with every protector of this type. It doesn't bother me, but screen clarity perfectionists will probably complain. Again, its not a TGSP, but its great for what it is. No other issues.
Really waiting for it to get released in Europe.. So far only America, India as far as I can see. :/
Akubus said:
Really waiting for it to get released in Europe.. So far only America, India as far as I can see. :/
Click to expand...
Click to collapse
You could go for the ultimate shield, which is basically the same type of screen protector.
Unlike the spigen it covers the whole front, I mean the area below the fingerprint scanner especially.
I don't know if there is any difference in thickness or coating.
The ultimate shield also has the same "orange skin effect" that was mentioned earlier in this thread, but u will barely see it when using your phone.
How's the scratch resistance on this one? I'm on my last Orzly TGSP, which lets in dust from ever side, I'm looking for alternatives that at least don't scratch.
Gaurav.Stallion said:
How's the scratch resistance on this one? I'm on my last Orzly TGSP, which lets in dust from ever side, I'm looking for alternatives that at least don't scratch.
Click to expand...
Click to collapse
After a quick clean an inspection i noticed one single micro scratch. This is since day before original post.
Just installed this today. Haze from the liquid went away within hours and so far so good!
There is an "orange peel effect" and it doesn't feel like glass but those are a given, and expected, so no points off for these two things.
It's much better than any tgsp that I've tried, simply due to the fact that it's edge to edge. I couldn't stand
1. The lack of adhesive on the sides
2. The sides being significantly cut off
The "wet install" allows for you to have a perfect install as well, as you can slide it around and adjust it perfectly, before finally setting it in place.
I'll see how it holds up over time and will update this post if anything unusual happens with it!
I will also try and get some pics soon (if I remember lol)
For those of you with this screen protector, how did you end up aligning it correctly? There's a small amount of space around each cutout and I found with my initial installation that while those were lined up, with the Rugged Armor case installed I had a small gap on the right side.
Amazon's instructions say to install with the case already on but Spigen's does not so thought I'd ask how others got theirs to line up correctly.
I installed one of these tonight. I did it with the Spigen case installed, and centered the protector on that. Waiting for it to cure and lose the bubbles. It didn't look that bad to start and 3 hours later it is looking better.
At this point I would pay a premium for flat glass! I just don't enjoy these phones like I used to without a nice perfect TGSP!
Click like if you agree!
bobbyricha said:
I installed one of these tonight. I did it with the Spigen case installed, and centered the protector on that. Waiting for it to cure and lose the bubbles. It didn't look that bad to start and 3 hours later it is looking better.
At this point I would pay a premium for flat glass! I just don't enjoy these phones like I used to without a nice perfect TGSP!
Click like if you agree!
Click to expand...
Click to collapse
How'd you end up getting rid of the excess water? Did you remove the case after putting on the screen protector?
CephiroX said:
How'd you end up getting rid of the excess water? Did you remove the case after putting on the screen protector?
Click to expand...
Click to collapse
I removed the case and wiped it down with the cloth. I left it out of the case to dry / cure.
CephiroX said:
For those of you with this screen protector, how did you end up aligning it correctly? There's a small amount of space around each cutout and I found with my initial installation that while those were lined up, with the Rugged Armor case installed I had a small gap on the right side.
Amazon's instructions say to install with the case already on but Spigen's does not so thought I'd ask how others got theirs to line up correctly.
Click to expand...
Click to collapse
On the Spigen install video at install.spiegen.com for the case friendly S8, they show putting it on with the case on. That's what I did. Spigen calls it full coverage but compatible with Spigen case.
After installing it then removing the case for drying and curing, the bubbles disappeared after about 18 hours, but I have one piece of trash trapped. After putting the case back on, it seems compatible but the film goes out to the border of the Spigen case without touching it, except it barely touches on the bottom. It is a very close fit, I believe putting it on without the case would cause problems with alignment.
Overall not bad, it is easier to align the film with the case on. The touch feel is OK for me.