DISCONTINUED LiquidDeathOS [ROM] [official] [7.1.1] [n1awifi] [p600] - Galaxy Note 10.1 (2014 Edition) Original Android D

DISCONTINUED LiquidDeathOS [ROM] [official] [7.1.1] [n1awifi] [p600] - Galaxy Note 10.1 (2014 Edition) Original Android D

Deathly Adiutor App
Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.
Features
Power Saving:
S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
Touchscreen Glove Mode (Not all screens support this)
CPU Control:
CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)
GPU Control:
GPU Time in States - Same as CPU Time in States (Times in each frequency)
GPU Frequency Control (not yet supported on Nougat)
GPU Voltage Control (not yet supported on Nougat)
GPU Governor Control (not yet supported on Nougat)
Battery control:
Full power statistics - See current and maximum charging currents and current source of power
Unstable power source detection - Lowers current until the power source is stable
Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
Screen-On current limiter - Limit charging if screen is on (to avoid overheating)
Speakers:
Privacy mode - Disable main speaker if headphones are plugged in
Earpiece volume
Left/Right speaker volume
Speaker equalizer
Headphones:
Left/Right channel volume
Mono output mode
Headphone equalizer
App Themes:
Light theme - White and Red
Dark theme - Grey and Red
Credits
This post was written by @ZakooZ
This app is brought you by the exynos5420 developer team: @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588, @ShevT
Translators:
@ShevT - Russian
The following people deserve distinction for their major contribution:
@tincho5588, responsible for 80%+ of the code for the new features
@deadman96385, the main maintainer of the Deathly kernel and most of the remaining code
Downloads
The app can be found in the Play Store:
Free version (with ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.ads
Donator version (no ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.adfree
Helping the developers
You may have noticed there's 2 versions of this app, one ad-free for donators and one with ads.
You can help us by clicking ads you're interested in for the free version, or purchasing the donator version!
We will use the money generated by this app as common money for the developers of the team. It will be used to pay for our web-hosting (we own a gerrit server and a domain name, exynos5420.com). It will also be used to buy a new device if one of ours breaks.
Translating the App
You can also help us by translating the app to your language:
1. You can start by looking at the full english language file: Link
2. Then compare it to your unfinished language file. You can find it here, under values-xx/strings.xml, xx being your language abbreviation.
3. You can then fill-in the missing strings in your language file. Here's an example of what a proper update looks like.
4. Then you can submit your translation by using our gerrit. If you don't know how to use gerrit, just PM the translation to your favorite developer and he'll get it merged!

FAQ:]
Q Does this ROM support custom kernels?
A No.
Q Why doesn't this ROM support Xposed?
A Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports while using it as Xposed can cause a lot of bugs.
Q Alright, but I still want to flash Xposed, so which version do I need to install?
A Xposed is not yet available for nougat, however when it is ready you will need to use the version arm sdk 25.
Q Can I have an ETA for the next build?
A Yes, the next build will be Thursday evening (eastern time), unless if something goes wrong of course...
Q Do I need to provide a log if I'm reporting a bug?
A If you want it to be fixed faster (or at all) then yes, you should definitely provide a log.
Q I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A In TWRP, flash the substratum rescue zip in the substratum folder in the internal storage.
Q Can the builds be dirty flashed over each other?
A Yes, however make a nandroid first as there is a chance of getting a bootloop or encountering bugs, also bugs may only be reported on a clean flash.
Q How do I get a logcat, and what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog

just in case

mosimchah said:
just in case
Click to expand...
Click to collapse
Whow!
Another great rom for our device and the file is really sssmmaaaaall this time!
No unwanted stuff, debloated right out of the box. Just the way I like it..!
I like to see new liquidness coming back...
Will test it tonight and report later...
I'm really curious to the optimizations done in this rom/kernel.
I am really glad with what dedication you all write new code for this nevertheless a few years old device.
If only we had a few good guys like you from the beginning ...
But finaly I'm really happy not to sold my device to replace it with a buggy pixel tab, Lol!

2 things so far, The wifi is set to recongize 5ghz in GB rather then all( don't remember the code for 'all', I switched mine to US). And some apps will have outstretched videos after a couple of seconds ( one such app is watchESPN). but other then, very nice ROM. Smooth and no troubling installing.

This ROM looks like a real killer. I like the fact that it is optimized for our specific chip, and the configurabilitylooks sweet. What gapps package is recommended for this build? I usully go with open gapps nano, but I might try the aroma package once more. I like the "pick & play" aspect and the install ui. Anybody have input with the gapps. I think I am going to really like this ROM. Thanks again, guys! ;-DeanoD

This looks awesome, i will be waiting for an stable version

Right, just clean flashed and I chose Nano GApps.
There's a problem that's solvable. It appears that the built-in AOSP WebView might not be working properly. For instance:
Feynman Lectures app opens but does not load its main page
Lightning Browser opens, but gets stuck once the UI is visible.
GetTube opens, but crashes once the YouTube link is clicked
Lithium eReader catalog crashes
SwiftKey is usable, but accessing its main menu (likely the one where it uses WebView to go online) crashes the app
"Crashes", as in the app is frozen and stops responding and Android offers the app-kill popup.
After installing Android WebView from the Play Store, everything works perfectly again. Checked the IR, camera, played some games (Machinarium, Deus Ex GO, TWoM) and all appears working. And yes, this is a real minimal install, so no music player, no browser etc from the get go.
And thus, those moving in from that CM14 build, might not be able to wake up from home key, hide software buttons and be rooted from a default install. I don't mind the former two, so to get root, download and flash the zip from here:
https://download.chainfire.eu/1017/SuperSU/SR1-SuperSU-v2.79-SR1-20161221223537.zip
I'll do some further testing, will report with more findings or logs in a week or so.

ROM won't boot after 15 minutes. Stuck at Android boot screen. Suggestions?

hipocrazy said:
ROM won't boot after 15 minutes. Stuck at Android boot screen. Suggestions?
Click to expand...
Click to collapse
Did you flash any mods with the ROM? Make sure you wiped the system, cache, and dalvik cache before flashing

Pact said:
Right, just clean flashed and I chose Nano GApps.
There's a problem that's solvable. It appears that the built-in AOSP WebView might not be working properly. For instance:
Feynman Lectures app opens but does not load its main page
Lightning Browser opens, but gets stuck once the UI is visible.
GetTube opens, but crashes once the YouTube link is clicked
Lithium eReader catalog crashes
SwiftKey is usable, but accessing its main menu (likely the one where it uses WebView to go online) crashes the app
"Crashes", as in the app is frozen and stops responding and Android offers the app-kill popup.
After installing Android WebView from the Play Store, everything works perfectly again. Checked the IR, camera, played some games (Machinarium, Deus Ex GO, TWoM) and all appears working. And yes, this is a real minimal install, so no music player, no browser etc from the get go.
And thus, those moving in from that CM14 build, might not be able to wake up from home key, hide software buttons and be rooted from a default install. I don't mind the former two, so to get root, download and flash the zip from here:
https://download.chainfire.eu/1017/SuperSU/SR1-SuperSU-v2.79-SR1-20161221223537.zip
I'll do some further testing, will report with more findings or logs in a week or so.
Click to expand...
Click to collapse
Thanks for the feedback, I'll include webview with the next build

DeanoD said:
This ROM looks like a real killer. I like the fact that it is optimized for our specific chip, and the configurabilitylooks sweet. What gapps package is recommended for this build? I usully go with open gapps nano, but I might try the aroma package once more. I like the "pick & play" aspect and the install ui. Anybody have input with the gapps. I think I am going to really like this ROM. Thanks again, guys! ;-DeanoD
Click to expand...
Click to collapse
Aroma should work, I don't think anyone on the team has tested it though

mosimchah said:
Did you flash any mods with the ROM? Make sure you wiped the system, cache, and dalvik cache before flashing
Click to expand...
Click to collapse
No mods, not even gapps. I performed a factory reset prior to flashing. I did receive the e: unknown command error after flash.
Edit: followed the instructions in OP to the letter. ROM boots fine now!

First Impressions
For a first draft ROM, this looks solid, and runs very clean. Still trying to tweak the install but system settings refuses to open so far. Will re-install tomorrow. ;-Deano

DeanoD said:
For a first draft ROM, this looks solid, and runs very clean. Still trying to tweak the install but system settings refuses to open so far. Will re-install tomorrow. ;-Deano
Click to expand...
Click to collapse
Currently there are none of the usual customisation options that you would expect in custom ROMs, absolutely nothing, being able to wake the tablet by pushing the physical home button would be a nice start. I'm also finding that like some other ROMs I've had on this and other devices Titanium backup will fail to restore some backups, just doing the animation it does while restoring but never actually finishing (having to install the occasional app from the play store while TB was doing its thing to make it progress), I had no sign of that problem with the CM14.1 ROM.
Once they hit their stride with development things should progress nicely, LiquidSmooth was probably the best ROM I've used (at least on this device).

It has navbar customizations in the system UI tuner, app ops in the security settings, and one of the main features is the substratum theme engine, more features will be added soon, can you get a logcat for the titanium backup issue

Right now the plan is to iron out the reported bugs, and then focus on a lot more features, keep in mind, this is this literally our first release ever, don't expect it to have a ton of features on the very first release

Really impressed by this ROM. Amazing work guys!

mosimchah said:
It has navbar customizations in the system UI tuner, app ops in the security settings, and one of the main features is the substratum theme engine, more features will be added soon, can you get a logcat for the titanium backup issue
Click to expand...
Click to collapse
My first go at capturing something using Catlog is attached, TB trying to restore Adaway app & data for a while.
I have looked through pretty much the entire Settings interface and found no "system UI tuner" anywhere and no app that looks as though it would do any such thing, I have not removed a thing via TB or any other means.

Related

[ROM][7.1.x|SM-T900| Unofficial LineageOS 14.1 (v2awifi)

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.* (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial LineageOS 14.1 (v2awifi) ROM for the Samsung Galaxy Tab Pro 12.2. The following will not be supported here:
Custom kernels
Mods
Xposed
Do not ask for ETAs. If you do, I will ignore you and your post.
SEANDROID ERROR
If you see a message at boot about Recovery or Kernel is not SEANDROID Enforcing, you can ignore it. This is just telling you that you are not running Samsung stock software. It has no effect on recovery or the ROM itself nor related to either.
I don't support Xposed and any logcat which includes a Xposed module will be ignored.
You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Bootloader Information
You need to make sure you have a Lollipop bootloader installed or else your device won't boot. Here you can go grab the latest bootloader and odin and flash it in download mode. Read all the steps before you do this.
Make sure you have a full backup because just in case you something fails.
Here are the steps to flash this via ODIN:
Make sure you have a full backup because just in case you something fails. Here are the steps to flash this via ODIN.
Reboot your tablet into download mode. Do this by first switching off the phone, then pressing and holding the volume down + home button together and then pressing the power button. Press volume up button to enter download mode.
Open ODIN on your computer. You?ll see the ID:COM box turning yellow with a COM port number upon successful connection with the tablet.
In ODIN click the BL button, select the bootloader firmware. It's a tar file.
Make sure Auto Reboot & F. Reset Time options are selected in ODIN
Click on the start button. When the process is completed your phone will reboot.
Installation
Download the zip(s)
Install a compatible Recovery (This will not work with the P900 recovery)
--I have built a new version of TWRP with the MM kernel. MTP, Vibations, ADB now work and there are performance increases. Link
Perform a nandroid backup of your current ROM (optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
Root
The SU root binary is no longer installed with ROM by default. If you would like to install root, please go here and download the binary.
Issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs or it didn't happen! You can use this: Syslog App
Downloads
Nightlies
Latest Nightly Date: Builds are built weekly now through the Exynos5420 Jenkins Server
Latest Device Builds
-----------
Google Drive Device Builds (Old - Not maintained)
Google Apps
http://opengapps.org/ - Thanks to the OpenGapps team!
Use the 7.1 and Arm options when downloading.
Issues
Lower than stock audio volumes
MHL out to TV not working
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging, & documentation.
Source:
Kernel: Link
Device Tree: Link
Credits
@Valera1978 Initial device tree
@UpInTheAir for his kernel magic and misc fixes
@DGT79 for his testing efforts and helping me manage the thread.
@chhaggerty, @tbjr50 and @titidu3701 for their testing efforts.
Exynos5420 Dev Team ( @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588 )
XDA:DevDB Information
[ROM][7.1.x|SM-T900| Unofficial LineageOS 14.1 (v2awifi), ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
thompatry
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2016-12-24
Last Updated 2017-01-26

Reserved
Deathly Adiutor App
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.
Features
Power Saving:
S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
Touchscreen Glove Mode (Not all screens support this)
CPU Control:
CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)
GPU Control:
GPU Time in States - Same as CPU Time in States (Times in each frequency)
GPU Frequency Control (not yet supported on Nougat)
GPU Voltage Control (not yet supported on Nougat)
GPU Governor Control (not yet supported on Nougat)
Battery control:
Full power statistics - See current and maximum charging currents and current source of power
Unstable power source detection - Lowers current until the power source is stable
Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
Screen-On current limiter - Limit charging if screen is on (to avoid overheating)
Speakers:
Privacy mode - Disable main speaker if headphones are plugged in
Earpiece volume
Left/Right speaker volume
Speaker equalizer
Headphones:
Left/Right channel volume
Mono output mode
Headphone equalizer
App Themes:
Light theme - White and Red
Dark theme - Grey and Red
Credits
This post was written by @ZakooZ
This app is brought you by the exynos5420 developer team: @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588, @ShevT
Translators:
@ShevT - Russian
The following people deserve distinction for their major contribution:
@tincho5588, responsible for 80%+ of the code for the new features
@deadman96385, the main maintainer of the Deathly kernel and most of the remaining code
Downloads
The app can be found in the Play Store:
Free version (with ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.ads
Donator version (no ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.adfree
Helping the developers
You may have noticed there's 2 versions of this app, one ad-free for donators and one with ads.
You can help us by clicking ads you're interested in for the free version, or purchasing the donator version!
We will use the money generated by this app as common money for the developers of the team. It will be used to pay for our web-hosting (we own a gerrit server and a domain name, exynos5420.com). It will also be used to buy a new device if one of ours breaks.
Translating the App
You can also help us by translating the app to your language:
1. You can start by looking at the full english language file: Link
2. Then compare it to your unfinished language file. You can find it here, under values-xx/strings.xml, xx being your language abbreviation.
3. You can then fill-in the missing strings in your language file. Here's an example of what a proper update looks like.
4. Then you can submit your translation by using our gerrit. If you don't know how to use gerrit, just PM the translation to your favorite developer and he'll get it merged!

Reserved

I would not recommend dirty flashing from CM-13.0 since this is a major OS change. Also something to take into account is that some apps are not ready for N yet.

Haha again I'm the first to make a post whenever Thompatry releases a brand new ROM.
Thank you very much!
Merry Christmas and Happy New Year 2017 to you and your family.
Best regards,
Eric

Finaly, a working Nougat for the awesome tab pro.
Love this tablet but the support from samsung is terrible. Stuck in 4.4 Kitkat and the tab deserves an better version.
Had a working Lollipop but it was buggy like hell.
This release is working perfect, and above all, its fast and smooth.
Nothing like the buggy Lollipop.
Keep up the good work, love this release and Marry Christmas to everyone.

So far working pretty well, but I'm not having any luck getting the SD card write fixes to work. I got them to work on M. Anyone have any suggestions?

netjetman said:
So far working pretty well, but I'm not having any luck getting the SD card write fixes to work. I got them to work on M. Anyone have any suggestions?
Click to expand...
Click to collapse
What do you mean of write fix ?
I'm having no problem with the sd card. I can use my card as internal or external storage.
Are you using a fat(32) or exfat formated sd card ?

Awesome Xmas present. Running smooth. Thank you for keeping my favorite tablet my favorite tablet!

Spymate said:
What do you mean of write fix ?
I'm having no problem with the sd card. I can use my card as internal or external storage.
Are you using a fat(32) or exfat formated sd card ?
Click to expand...
Click to collapse
Got it figured out. Thanks!
Sent from my SM-T900 using XDA-Developers mobile app

netjetman said:
Got it figured out. Thanks!
Sent from my SM-T900 using XDA-Developers mobile app
Click to expand...
Click to collapse
What was your fix an what application where you using?
Cheers,
David,
(It may help others out to release information on fixes)

Hi, what version of TWRP do you have in your recovery package?
I've got 2.8.7.0 currently installed.
and can i flash your required recovery using my TWRP (flash image)?

dialbat said:
Hi, what version of TWRP do you have in your recovery package?
I've got 2.8.7.0 currently installed.
and can i flash your required recovery using my TWRP (flash image)?
Click to expand...
Click to collapse
Here is a quote from
HTML:
https://twrp.me/devices/samsunggalaxytabpro122exynoswifi.html
"Download the latest TWRP image file (.img) from the download link and boot TWRP. Go to install and find and select the Images... button. Browse to the image that you downloaded and select it. Choose recovery and swipe to flash."
Should work
@thompatry
I feel the force is strong with him Whoever ca do this can build a Death Star too :laugh:
Really great work, never dared to dream of gettin Nougat on this rom and now. Just great work. Thx a lot and merry christmas!

Can i root this room with this Root Method?
or is there a better way?

Great work! I hope there is going to be a version for the sm-t520 as well.
Gesendet von meinem SM-T520 mit Tapatalk

dialbat said:
Can i root this room with this Root Method?
or is there a better way?
Click to expand...
Click to collapse
This firmware already rooted, you only need enable root in developer settings

dialbat said:
Hi, what version of TWRP do you have in your recovery package?
I've got 2.8.7.0 currently installed.
and can i flash your required recovery using my TWRP (flash image)?
Click to expand...
Click to collapse
Hi @dialbat
It is highly recommended you have 3.0.2-0 or higher, whilst you could still do it on your version more than likely, I would not recommend it as the later version have more advanced options that one should consider using, especially in the wipe department.
Just keep in mind that any recommendations that you see in the initial post, it is more than likely because during the testing period before release, we may find certain procedures, bugs or operational matters that are reflective on the versions of systems we are using, and thus we always look at the best possible recommendations, typically this avoids heavy amounts of repeated questions and repeated issues.
Cheers,
David.
Sent from my SM-P900 using Tapatalk

srega said:
This firmware already rooted, you only need enable root in developer settings
Click to expand...
Click to collapse
yes, figured it out

dialbat said:
yes, figured it out
Click to expand...
Click to collapse
Hi @dialbat
Just note if you install any other SU system it might claim that it is out of date, whilst this might be the case installing any other SuperSU system may interfer with the one it comes, and unless you need any crazy functions, the default one is pretty good.
Might be a useless bit of info, but I spent hours working on this to see what was optimal, and no matter what I landed back at the built in one for convieniance and usability [emoji2]
Cheers,
David.
Sent from my SM-P900 using Tapatalk

CM14 first impressions. Clean install, big wipe, nano Open Gapps, all new app installations. Sound is weak and "OK Google" doesn't work as advertised. Play Store hiccoughed and then froze the tablet but reboot fixed it and no further glitches. Hangouts still will not send a text as with CM13.
Otherwise, as I have been adding and testing more apps, I have not found any problems. It seems amazingly smooth and stable. WiFi and BT are good. Citrix receiver works like a bomb. Haven't found an app yet that doesn't play in the sandbox with Nougat. File explorers and Titanum read and write to extSD1 out of the box. Love dual screen. Mouse works great with arrow and no more blue circle. Seems like this is easily a daily driver from the first release. Goodby CM13, I used to love you but now have a new friend.
Merry Christmas to us all!

[ROM][weekly][Official] AICP 12.1 [P600][n1awifi][7.1.2]

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, I will laugh at you. Hard. A lot.
*
*/
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICPAndroid Ice Cold Project
AICP is known by everyone as Ice Cold Project that started on Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, Rom has always been AOKP based. Unfortunately, since AOKP either stopped development or will make a comeback later this year, we changed our base to CM when it comes to hardware, drivers and some features.
If there are any bugs, either we will sort them or CM team if it concerns their modifications. This rom isn't CM supported so no need to report errors or bugs to them!!
The following will not be supported here:
Custom kernels (besides for prime)
Mods
Xposed
.
.
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
maxwen
DU team
SlimRoms team
CarbonRom team
LiquidSmooth rom team
OmniRom team
Community
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
.
.
.
Note: n1awifi is the same device as lt03wifi - the SM-P600
[/SIZE]
Official Releases: http://dwnld.aicp-rom.com/?device=n1awifi
Official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Note: Here is the last official build https://www.androidfilehost.com/?fid=3700668719832236662
Gapps
https://forum.xda-developers.com/android/software/gapps-dynamic-gapps-t3487192
test builds: https://www.androidfilehost.com/?w=files&flid=173061
kitkat bootloader kernel builds (the zip files are for all nougat roms): https://www.androidfilehost.com/?w=files&flid=173258
You tell...

ROMS should contain everything you need to enjoy Lollipop. You are not required to install any Add Ons, simply download the latest ROM, gapps, flash it, and go!
You are STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup - these can cause stability issues that are very hard to debug. If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience strange behavior.
How to flash:
This ROM REQUIRES the Lollipop bootloader. See this post to learn how to update your bootloader.
1. Download ROM and Gapps and transfer to device
2. Boot into recovery (TWRP recommended)
3. Wipe the system, data, cache, and dalvik cache
4. Install ROM
5. Install Gapps
6. Reboot to system
ROM has gapps persistance in between dirty flashes
PREREQUISITE FOR OTA:
To be able to flash over OTA app, TWRP recovery is needed.
You can still use CWM and OTA app, but only to download zip file and flash it manually from within recovery. Zip gets saved under AICP_ota folder on your internal SDcard.
If you want to contribute to AICP or wanna see what is being worked on/merge feel free to visit our gerrit, link is at the bottom!!!
IceColdJelly AICP G+ community
kernel source
kitkat bootloader builds
device tree
ROM
gerrit
github
XDA:DevDB Information
[ROM][weekly][Official] AICP 12.1 [P600][n1awifi][7.1.2], ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
mosimchah, eyosen
ROM OS Version: 7.x Nougat
Kernel: Linux 3.4.x
ROM Firmware Required: LL bootloader
Based On: LineageOS
Version Information
Status: Stable
Created 2017-04-19
Last Updated 2017-12-14

Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, the next official build will be on Thursday, around 5:40am (Eastern time).
Q. Does this ROM support custom kernels?
A. I support prime https://forum.xda-developers.com/ga...kernel-prime-kernel-p601-tw-lollipop-t3456312 .
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports while using it as Xposed can cause a lot of bugs.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You need to use the version arm sdk 25.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post..
Q. What TWRP versions are supported?
A. ShevT's. Check out this thread for the TWRP download.
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid first as there is a chance of getting a bootloop or encountering bugs, also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the system, cache, and dalvik cache, flash the ROM, gapps, and reboot.
Q. Will this work on the Kitkat bootloader?
A. Yes if you flash Prime kernel.
Using the ROM:
Q. How do I enable software buttons?
A. Settings->Navigation.
Q. Do I need to provide a log if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a log.
Q. How do I get a logcat, and what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog

Deathly Adiutor App
Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.
Features
Power Saving:
S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
Touchscreen Glove Mode (Not all screens support this)
CPU Control:
CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)
GPU Control:
GPU Time in States - Same as CPU Time in States (Times in each frequency)
GPU Frequency Control
GPU Voltage Control
GPU Governor Control
GPU Thermal - Control all thermal throttling points for the GPU (make your device run colder... or even hotter)
Battery control:
Full power statistics - See current and maximum charging currents and current source of power
Unstable power source detection - Lowers current until the power source is stable
Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
Screen-On current limiter - Limit charging if screen is on (to avoid overheating)
Speakers:
Privacy mode - Disable main speaker if headphones are plugged in
Earpiece volume
Left/Right speaker volume
Speaker equalizer
Headphones:
Left/Right channel volume
Mono output mode
Headphone equalizer
App Themes:
Light theme - White and Red
Dark theme - Grey and Red
Downloads
The app can be found in the Play Store:
Free version (with ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.ads
Donator version (no ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.adfree

This is a work in progress guide to getting great battery life
1. In Deathly Adiutor disable all the input boosters in the cpu section
2. Use the S-pen power saving mode
3. Set the vibration strength to zero (or close to zero) in the misc section
4. Set the default I/O scheduler to noop
5. Go to developer options and turn off the logger buffer sizes (you will have to turn this back on in order to get a logcat for bug reports)
6. Use the suspend actions in aicp extras and turn off the ota checker
7. Use greenify to enable aggressive doze and doze on the go, and use it to limit background apps
8. Turn off all animations in developer options
9. Disable fsync (risky, you could lose data if the system crashes)
=================================================================================================================
This is a work in progress guide to getting great Performance at the expense of battery life
1. Go to developer options and turn off the logger buffer sizes (you will have to turn this back on in order to get a logcat for bug reports)
2. turn off the ota checker in aicp extras
3. Use greenify to enable aggressive doze and doze on the go, and use it to limit background apps
4. Turn off all animations in developer options
5. Disable fsync (risky, you could lose data if the system crashes)
6. Use the input boosters

reserved

Firstly, many thanks for this and helping keep our tablets up to date. I am hopefully going to try flashing this later today.
Is this Rom pre-rooted or am i going to need to flash SuperSU?
Thanks again.

Tim047 said:
Firstly, many thanks for this and helping keep our tablets up to date. I am hopefully going to try flashing this later today.
Is this Rom pre-rooted or am i going to need to flash SuperSU?
Thanks again.
Click to expand...
Click to collapse
It's pre-rooted with magisk

Awesome work, thanks!
Is this as optimised for the P600 as LD was? Any summary of what makes this unique compared to Lineage?
Sent from my HTC 2PS6200 using Tapatalk

Finner42 said:
Awesome work, thanks!
Is this as optimised for the P600 as LD was? Any summary of what makes this unique compared to Lineage?
Click to expand...
Click to collapse
1. No,
2. Yes, way more features/customisations, mhl partially works, and is in some ways faster

This seems to be the best rom for p600, at the moment. :good:
It works with prime kernel v. 7.2 and has much more features than LOS and LD.
Substratum is also working and should be included as default system app and there is MagiskManager support, so that Safetynet is finally working.
There are only some minor bugs like:
- QS-Tile background is always translucent
- minor graphic glitches
- if Nougat Sidebar inside Settings menu is deactivated via AICP extras the back-button which replaces the menu-button doesn't work
- Ui is a little bit laggy
- screen mirroring doesn't work like on all other aosp roms
- Brightness-sensor is a little bit slow or not correctly calibrated
- Magisk Manager link in settings should be in the system category and not in the personalise category
Thank you mosimchah! :victory:
*update: graphic glitches and performance issues are prime kernel related. No issues with original AICP kernel. So don't flash prime kernel until the kernel gets an update!

Thanks again for yet another great upgrade! So far running great, the only issue I'm having is that the S-Pen button isn't working, which isn't a big deal for me.

s pen features ( cursor on the screen, palm rejection etc)
Does the features like palm rejection, the cursor that shows up when you hover your pen over the screen, and air command still work after rooting and installing Nougat? My Note 10.1 still has Lollipop on it and I am on the fence about installing Nougat

Sweet!!
M -- Once again, you have outdone yourself with this ROM. With full wipe and fresh install, it took barely 20 mins. And the settings will keep me happy for ages. My Wacom Feel Stylus is also performing fantastically. So far, not even a blip. I may be imagining this, but the screen res even seems smoother. Great work from the entire team that worked on this. ;-DeanoD

DeanoD said:
M -- Once again, you have outdone yourself with this ROM. With full wipe and fresh install, it took barely 20 mins. And the settings will keep me happy for ages. My Wacom Feel Stylus is also performing fantastically. So far, not even a blip. I may be imagining this, but the screen res even seems smoother. Great work from the entire team that worked on this. ;-DeanoD
Click to expand...
Click to collapse
Thanks, glad you like it

BenHaHaHa said:
Does the features like palm rejection, the cursor that shows up when you hover your pen over the screen, and air command still work after rooting and installing Nougat? My Note 10.1 still has Lollipop on it and I am on the fence about installing Nougat
Click to expand...
Click to collapse
Palm rejection works, no cursor, and you can install a separate app for air command, search the lineage thread for it

The first official build should be next Thursday

mosimchah said:
The first official build should be next Thursday
Click to expand...
Click to collapse
Could be instelled by OTA? I wanna try this ROM, but if I have to repeat the installation on Thursday I would wait for it.
Thanks for your job!!!

josveland said:
Could be instelled by OTA? I wanna try this ROM, but if I have to repeat the installation on Thursday I would wait for it.
Thanks for your job!!!
Click to expand...
Click to collapse
Just dirty flash the build... The ota might work for the next build, I'm not entirely sure though

Great Rom, so far everything is smooth. Love all the features.
Only problems I found are some audio glitches, mostly when locking/unlocking the screen while listening to music from the headphone jack.

BenHaHaHa said:
Does the features like palm rejection, the cursor that shows up when you hover your pen over the screen, and air command still work after rooting and installing Nougat? My Note 10.1 still has Lollipop on it and I am on the fence about installing Nougat
Click to expand...
Click to collapse
Some apps have their own floating cursors, but there isn't one built into the ROM (as far as I know). The kernel has the option to disable pen detection while the pen is inserted.
Air Command / S-notes etc are Touchwiz-only features. There are certainly some third-party apps to fill the gap, if you search for S-pen in the play store. The most popular ones seem to be the combination of CM S-Pen Add-On and Note Buddy.
EDIT: Sorry, I didn't notice that your comment already had a reply.

[7.1.x|SM-G900H| Unofficial LineageOS 14.1 (k3gxx)

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
It is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This thread is for Unofficial LineageOS 14.1 builds for k3gxx (SM-G900H). The following will not be supported here:
Custom kernels
Mods
Xposed
Magisk
I don't support Xposed/Magisk and any logcat which includes a Xposed/Magisk module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
k3gxx Downloads
Google Apps:
http://opengapps.org/
Want Root access? Flash this!
LineageOS SU Addon
Flahed the SU Addon and now you want to remove it? Flash this!
LineageOS su addon Remover
02/09/2017
*KERNEL: patched A LOT of cves!
*KERNEL: added SU hide patches. Now the su binary wont be detected if root access is disabled in developer settings.
*Red "Kernel is not enforcing" message on boot is gone now
*Blueooth calls improvements (wideband audio properly enabled now)
*VoIP calls have been fixed (WhatsApp and other apps)
*In call echo has been decreased
*Ramdisk has been reworked
*Some SELinux denials have been adressed
*We now have SdcardFS support, which almost doubles the read/write speeds vs fuse
*OMS SUPPORT HAS BEEN REMOVED FROM THE ROM! IT IS BREAKING OUR AUTOMATED BUILD SERVER!
*More under the Hood changes
16/08/2017
*Lots of audio improvements and fixes! (better quality, more power efficient)
* Fixed Bluetooth calls
*Improved camera quality! pics are more than great now!
*CPUSETS are now enabled... this should save a lot of power!
*New cpufreq relation... this should save a lot of power!
*Lots of under the hood changes (stability improvements)
12/08/2017
*Lots of audio improvements and fixes
*WiFi tetherting fixed
*USB tethering fixed
*Minimum frequency for the GPU lowered from 177mhz to 100mhz (power saving optimization)
*Samsung Input boosters were disabled (power saving feature)
09/08/2017
*Initial Release
*Reproducing videos with the camer app does not work. You must reproduce them from the gallery!
*Sharing videos on apps like WhatsApp or Snapchat does not work (this bug affects all the exynos5 family)
*You tell me!
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/d....tortel.syslog
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
Exynos5420 Dev Team (@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah
@joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588)
Exynos5422 Dev Team (somadsul, hunnymadaan, griffin98)
Source Code:
Kernel
https://github.com/exynos5420/android_kernel_samsung_k3gxx/tree/cm-14.1
Device Tree
https://github.com/exynos5420/android_device_samsung_k3gxx/tree/cm-14.1
XDA:DevDB Information
[7.1.x|SM-G900H| Unofficial LineageOS 14.1 (k3gxx), ROM for the Samsung Galaxy S5
Contributors
tincho5588
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Stable
Created 2017-08-09
Last Updated 2017-09-03

Reserved
Want Root access??
Just flash with TWRP the LineageOS SU Addon zip file found on the download section... Flash it after you have flashed Google Apps!!!
Then enable the developer options menu with this guide:
To enable Developer Options, open the Settings screen, scroll down to the bottom, and tap About phone or About tablet.
Scroll down to the bottom of the About screen and find the Build number.
Tap the Build number field seven times to enable Developer Options. Tap a few times and you’ll see a toast notification with a countdown that reads “You are now X steps way from being a developer.”
When you’re done, you’ll see the message “You are now a developer!”. Congratulations. Don’t let this newfound power go to your head.
Tap the Back button and you’ll see the Developer options menu just above the “About Phone” section in Settings. This menu is now enabled on your device—you won’t have to repeat this process again unless you perform a factory reset.
Now go into the developers options menu and find the option to enable root access!!
Flashed the SU Addon and now you want to remove it from your phone??
Just download the LineageOS SU Addon remover and flash it with TWRP...
OMS SUPPORT HAS BEEN DROPPED FROM THE ROM SINCE 20170902!!

Reserved
Information about the kernel and its features will be added here soon...

Whats up guys! Some of you may already know me, or may have heard of me, from my work in ha3g (Galaxy Note 3 exynos)... Today I come here to bring you my latest work, a fully stable and functional LineageOS ROM for the Samsung Galaxy S5 exynos variant...
It took a lot of time and effort to bring this up to this point, when I started with this project like 10 days ago I found a device that was really broken (random reboots, bugs all over the place, missing features, terrible battery life and performance...) I entirely redid the kernel from scratch, and redid 90% of the device and vendor trees to get the result we see here today... The device works like a charm, battery life is great, it is complete feature wise, and nothing is broken (except for the two minor bugs listed in the OP bug section...)
As I always do, i will give you THE reminder...
*You NEED to flash this clean (wipe system, data, cache and dalvik-cache before flashing)
*Don't use xposed/magisk/mods... these kind of mods will certainly interfere with the well functioning of the system...
If you didn't follow these procedure, and encounter a bug, please don't report it... start over the proper way and try to reproduce the bug again before giving any report...
Also, i do not take into consideration the reported bugs I can not reproduce in my own device... the device I hold in my hand is the same you have in yours, if it works for me, it works for you...
This ROM is labeled as STABLE... what does this mean? It is suitable to be used as Daily Driver and has no major issues...
What's next now? Bring up the selinux policy, get cves for the kernel, and go Official...
Guess I don't have anything more to add for the moment... I hope you enjoy my work!
Happy flashing!
EDIT: Added some screenshots! Sorry for the crappy battery screenshot... I dont have a proper one... but you can tell by the screenshot that the stand-by times are great!

Thanks for your efforts mate we waited for this since device released

Welcome brother @tincho5588. I sold my n900 and bought g900h. I really missed your n900 roms. They were very stable. And finally you brought life to g900h too thank you very much ???
Battery is not decreasing it is unlimited lol. Ambient display, leds, fingerprint everything is working
[/COLOR @tincho5588 bro installed rom. Everything is perfect. The most stable rom of g900h. But only problem, camera quality is low, very low. U had fixed this issue on n900 with @Safarend. Thanks good luck

@tincho5588 you're life saver!! thank you for all your efforts

Thanks for this beauty!!!!!

Wow... Congo Bro.. dowlading...!! :good:

In this rom does the audio work well in calls?

darxalex said:
In this rom does the audio work well in calls?
Click to expand...
Click to collapse
It works great!
Check out the bugs list in OP... Those are the only things not working... The rest works all...

tincho5588 said:
It works great!
Check out the bugs list in OP... Those are the only things not working... The rest works all...
Click to expand...
Click to collapse
Bro can you please check camera quality. It needs to be fixed like at past you did to n900

cnkzlyr said:
Bro can you please check camera quality. It needs to be fixed like at past you did to n900
Click to expand...
Click to collapse
What are you talking about? Camera quality is great! Produces beautiful shots! Check the attachment below...

Deleted

No bro when I pinch zoom it shows me big pixels

cnkzlyr said:
No bro when I pinch zoom it shows me big pixels
Click to expand...
Click to collapse
That's normal man! This is digital zoom... If you want decent zoom you need optical zoom... If you want good zoom you need a reflex camera...
Expect crappy zoom in this, or any camera with digital zoom...

tincho5588 said:
That's normal man! This is digital zoom... If you want decent zoom you need optical zoom... If you want good zoom you need a reflex camera...
Expect crappy zoom in this, or any camera with digital zoom...
Click to expand...
Click to collapse
It is okay bro no big problem. U are the master I just though If u might forgot something to add for camera. So it is good if u say good

This is the front cam

cnkzlyr said:
It is okay bro no big problem. U are the master I just though If u might forgot something to add for camera. So it is good if u say good
Click to expand...
Click to collapse
Zoom.is decent... Attaching a 4x zoomed photo...
BTW, trash that Frankenstein cable!! Man, that thing is hazardous lol

tincho5588 said:
Zoom.is decent... Attaching a 4x zoomed photo...
BTW, trash that Frankenstein cable!! Man, that thing is hazardous lol
Click to expand...
Click to collapse
Lol it is a perfect cable. Bro I know u angry when I say this. Rear cam maybe ok, but front cam needs a fix.

[ROM][CAF][22/09][OxygenOS Blobs][UNOFFICIAL]halogenOS 7.1.2 [Color Engine] [UBERTC]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android, Reimagined.
For the best experience, view the thread on a web browser like Chromium or Firefox.
Desktop: Brilliant. Mobile: Good. Tapatalk: OK. XDA-Labs: Horrible.
https://img.xda-cdn.com/sYTJztl8Kv1_[LIST]
[/LIST]RWoNac2kFW-Ti5M=/http%3A%2F%2Fi.imgur.com%2F9vBBxp6.png
Code:
[SIZE="3"]YOU are doing modifications to your device.
YOU are responsible for what you do.
We are not responsible for any damages, data loss or any type of unexpected,
bad or damaging results! If you have **SERIOUS** problems with this software,
please contact the developers or maintainers. We are not liable for anything
bad that happens to your device.
As long as you are responsible, some companies such as OnePlus
WILL HONOR IT. Some people occasionally describe them as heroes.
Don't be stupid and bet on that though, please be responsible for what you do.
We prohibit you from overclocking to 1337 GHz thinking, that an OEM would
replace your glorious space heater etc.
We recommend you to take the advice above regardless.[/SIZE]
halogenOS Checklist
Although no data should be lost or damaged by the flashing process,
we advise you to follow the following steps if you are coming from another rom:
Please take a full nandroid backup!
Please copy your back up to an external device.
Backing up your Internal Storage is also recommended.
When completed, please clean flash the build!
Although you usually can dirty flash halogenOS over other ROMs, considering the other
ROM has the same Android version, it is not guaranteed. In case of serious
crashes please do a clean flash.
XOS is a new generation cutting-edge OS for Android based on Code Aurora Forum releases.
What is XOS?
halogenOS, also known as XOS is a new Android ROM which ships with the global aim to
become a modular ROM which keeps as high as potentially possible operating
performance on your mobile device while still maintaining a sufficient feature
base of nice, small and minimal features that would not be available via any
external feature base, extension, mod or plugin.
We hope you have a truly halogenified experience!
Internals of XOS
At core, the ROM is composed mainly of components from CodeAuroraForums (CAF),
featuring only extremely minor set of components from CyanogenMod (CM) which
have been added to source in order to allow for better cross-device compatibility.
Our LOVE to others
A huge thanks goes to those behind the CodeAuroraForums (CAF), the CyanogenMod
organization and all of its
contributors for the sources used in the development of the base ROM which we
started with inclusive of all the work and dedication their team puts in order to
keep us updated on the awesome contributions that they make.
We will be keen on ensuring that we be up to date with the code from our base sources,
with regular ROM updates hopefully coming from time to time.
Please do not ask for ETA's (else you shall be spooked by Mr Skeltal). Almost all of us are
students, and with the current lifestyles and routines we have, it is not that easy to acquire
time to develop the ROM, though we'll be sure to keep you updated and release OTAs as
soon as they are available and ready for publication. If you want to be really updated quick,
then join us on Telegram: http://telegram.me/halogenos
Visit our website for features such as: Downloads, Information etc.
http://halogenos.org
(Not finished yet)
Common stuff
The ROM is super stable as of now and we'll maintain a clean and proper ROM.
Known issues are going to be fixed as soon as possible. We don't have infinite time.
Planned features (don't ask for these!):
Heads-Up toggle
Button actions
OTA Updates
Highlights (some are OPO-only):
Built with UberTC
No QS Bug!!!
Reworked Lockscreen Visualizer
New implementation of button backlight
Modern Services -> Google Assistant etc.
Substratum
Full media support (FFMPEG, video codecs, ...)
Great Audio quality, no distortions, no crap
Optimized many portions of the system including surfaceflinger, inputflinger, System Server, and more
Super fast boot
Superuser-capable
Great battery life
Soundmod support (not all soundmods work on Nougat, it's not our fault)
addon.d support (backups your gapps etc. when flashing new build - don't wipe system before flashing!)
init.d support
BusyBox
Disabled Access Time for all partitions (We don't need access time. When access time is enabled, it will store the exact date of the access when a file is accessed, what just wastes write cycles (in theory) and has impact in I/O performance.)
Super smooth
Signature Spoofing toggle (Support for MicroG)
Support for trusted third-party WebViews like Chrome
Long press on home for assist toggle
Security Patches in kernel
KCal support
Kernel optimizations
OpenGapps (Mini/Micro/Nano recommended) and Banks GApps support
Offline Gestures support (super fast recoginition)
Alert Slider
Full KeyHandler & KeyDisabler support
Dexpreopt for faster (first) boot time and less space consumption on data partition
Upgrade & Boot the ROM in just 5 minutes - no more endless waiting for flashing a new build
Very high compatibility with other ROMs
How to update the ROM:
Download the latest zip
Reboot into TWRP (Please use official TWRP)
Do not wipe anything
Flash the ROM
Flash Magisk 13.3 or newer if you want
Reboot
You don't need to wipe Cache/Dalvik.
You don't need to flash gapps again. There is some magic going on which keeps your GApps. Just make sure that you don't wipe system before flashing.
You don't need more than 5 minutes.
How to install the ROM for the first time:
Download the latest zip
Reboot into TWRP (Please use official TWRP)
Wipe system, data and cache (If you want to try a dirty flash, dont wipe anything)
Flash the ROM
Flash gapps if you want
Flash Magisk 13.3 or newer if you want (Download 2.79 here)
Reboot
ROM Download Links:
Download halogenOS now:
AFH:
NEW:Build 22/9/2017
OLD:Build 13/9/2017
OLD:Build 10/9/2017
ROM Sources
All sources incl. ROM, Kernel, Trees @ halogenOS GitHub Organisation.
## DEVICE SPECIFIC
OnePlus One
Kernel source
Device tree
Vendor tree
This is an unofficial build.Now the only differece is the Toolchain used
XDA:DevDB Information
Unofficial HalogenOS, ROM for the OnePlus One
Contributors
Silvered
Source Code: https://github.com/halogenOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: HalogenOS
Version Information
Status: Stable
Created 2017-09-10
Last Updated 2017-09-22

Changelog
Changelog:
Build 22/09/2017:
Fixed Black Screen
Doze improvements
Set animation from 1.0 to 0.5
enable aptXHD support
Bluetooth: Properly check L2CAP config option output buffer length
Autoflash OxygenOS Firmware
Build 13/09/2017:
I suggest to do a clean flash before install build 13/09
Replaced Launcher3 with Pixel Launcher
Added Circular Icon in Pixel Launcher
Replaced SnapDragonCamera with OnePlusCamera
Added Color Engine

Help me
Hi all, for maintaining this ROM I pay every month a server that cost 7$. So because of this cost I can't maintain this ROM forever, if you use this ROM and love it, you can help me with a donation.
Paypal: HERE

First.
Happy to see HalogenOS back.

Assuming to the first post we still can't change button actions, right?

Stylez Ray. said:
Assuming to the first post we still can't change button actions, right?
Click to expand...
Click to collapse
Yes, i will add it in the next releases

Silvered said:
Yes, i will add it in the next releases
Click to expand...
Click to collapse
have you personally tested this rom and have previous mentioned bugs been resolved i.e camera?

OOS blob v3 right?

Clean flashed. Camera is fast. I like how minimal it is.
Dang that VoLTE toggle
Edit: Unable to find lockscreen gestures in settings.

Lolll @ volte screenshot

joefso said:
have you personally tested this rom and have previous mentioned bugs been resolved i.e camera?
Click to expand...
Click to collapse
If you meen the bug of camera app, i tested the build, it works fine and the camera too

Thanhtho96 said:
OOS blob v3 right?
Click to expand...
Click to collapse
Yes

Silvered said:
If you meen the bug of camera app, i tested the build, it works fine and the camera too
Click to expand...
Click to collapse
Camera already worked in permissive, but had problems in enforcing. Could you take a look for the next build?
Also the text don't in the upper bar, when it displays the context of an SMS, is somewhat too big when the screen display size is set to smallest, could this be somewhat smaller? Reboot fixed it
hdr crashes with default camera, bacon camera seems to work fine

joefso said:
Camera already worked in permissive, but had problems in enforcing. Could you take a look for the next build?
Also the text don't in the upper bar, when it displays the context of an SMS, is somewhat too big when the screen display size is set to smallest, could this be somewhat smaller? Reboot fixed it
hdr crashes with default camera, bacon camera seems to work fine
Click to expand...
Click to collapse
Confirming HDR crash on camera.

ninjasumit said:
Confirming HDR crash on camera.
Click to expand...
Click to collapse
Log please

joefso said:
Camera already worked in permissive, but had problems in enforcing. Could you take a look for the next build?
Also the text don't in the upper bar, when it displays the context of an SMS, is somewhat too big when the screen display size is set to smallest, could this be somewhat smaller? Reboot fixed it
hdr crashes with default camera, bacon camera seems to work fine
Click to expand...
Click to collapse
HDR works for me ..just enable AutoHDR in setting for both front and back camera before using it simple.
Just clear data of the camera and do the above setting.
"Though its crashing without enabling autoHDR"

Absolutely best nougat ROM for me. Plz keep updating until you made this one for Android Oreo

Silvered said:
Log please
Click to expand...
Click to collapse
Here you go.

Very nice rom love it i like near stock roms but have strayed with n roms due to camera. Great camera except the flash doesn't work right see pics the bright one was taken with google camera other pic with stock camera. When you touch screen to focus flash lights up the object like in the google cam pic but when it takes the pic the flash is so dim it doesnt really work.
What would be the best camera app to use to get full benefits of the camera blobs? Bacon camera?

Rom is fluid and responsive as compared to other caf roms. Keep updating because some of developers just creating lots of roms And neglecting there updates specially sutenized CAF roms...

[ROM][UNOFFICIAL] NucleaROM Nougat for Moto X Style(pure)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/* Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM/KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will laugh at you.
* BOOM! goes the dynamite
*/
Hi XDA community, we are proud to present our vision of LineageOS with features that we think are useful. Hope you enjoy our builds as much as we do. The main goal of Nuclear Team is to provide a clean and fast ROM with nice, minimal and useful features.
• Based on LineageOS 14.1 by @Hashbang173
• Built for Stock Nougat Kernel and Modem
• Android version 7.1.2_r29
• Optimized for fast app opening and disabled lot of debugging
• Nuclear Settings
• Customizable status bar (Clock position, Date, Network Indicators, Battery style and such)
• Gestures Anywhere
• Switch To Hide SuperSU from Status Bar
• Ambient Display (Pick-up and Hand wave)
• Network traffic indicator
• Three finger swipe to screenshot
• Show CPU info
• DT2S everywhere on lockscreen
• Options to modify Dash board/Quick Settings (Number of columns)
• Option to disable warning color on Low Battery
• OmniSwitch
• Option to reset Battery history stats
• Enhanced dialer with smart call feature
• MicroG and signature spoofing support to use the ROM without GApps
• Enhanced system animation scale sliders in developer options
• Screen pinning selection in recents
• Show current and new version in package installer
• Option to disable screenshot sound
• More volume steps
• Substratum and Magisk tile in dashboard (if installed)
• QS tiles animations and row/columns configuration
• Alert slider modified with more options
• Wakeblock app support and baked into rom's zip ( more info Here ) all credits for @GioBozza
• Launcher3 with Google now gesture and icon support
• Exclusive NucleaRom wallpaper app
• AOSPA color engine (Accent color)
• All LineageOS goodies
Known Bugs:
Initial Release. But I couldn't find any.
-If you have a major bug to report that has not been reported already, and is not a known issue with CM,
please take the following steps to report it to us. It will save you time, as well as us.
- Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
- After downloading the Catlog app, go to the app settings, and change the log level to Debug.
- Clear all previous logs and take the exact steps to produce the error you are receiving.
- As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
- Copy and paste the entire log either to Hastebin or Pastebin
- Save the log, and copy and paste the link into the forum with a brief description of the error.
- You can also open trouble tickets on our website for bugs.
If you have flashed any third-party module and experiencing instability or whatever then please don't submit any bug report. You will be ignored.
First install (clean Flash) (If you come from another ROM or another Android version)
× Read the whole OP and make sure that you understand what is written here.
× Make a nandroid backup (optional but always recommended)
× Install Custom Unofficial TWRP
× Download Latest ROM
× Download 7.1 arm64 GApps
× Wipe System, Data, Cache, Dalvik-cache
× Flash Latest build for your device
× Flash ROM
× Flash GApps (optional)
× Flash your preferred Root method (optional)
× Reboot
Important note:
× Upon first boot, Disable the 'wakeblock' app. Device is safe to use after that.
× For safer side, you can permanently remove it by deleting /system/app/wakeblock folder.
Updating:
× For now, Uninstall Magisk (if installed)
× Flash Latest Build
× Wipe Cache, Dalvik-Cache
× Reboot
× Install Magisk (optional)
Goodluck, Have Fun and Enjoy!
LineageOS
@Hashbang173
@acuicultor
Lord Boeffla
Temasek
Ak
ResurrectionRemix
Aicp
Aospextended
XDA
Flar2
Grarak
Koenkk
nvertigo
GioBozza
Nuclear Team & testers
And a very special thanks to TugaPower
Anyone I might have forgotten (please let me know)
Main devs are @Moludo, @lozo2010, @Ordenkrieger and @acuicultor is the kernel Dev.
Telegram support chat:HERE
If you want to buy us a beer/coffee you can donate Here all donations will serve to improve the rom.
Thanks to all donors!!!!
@AlkaliV2
Please when do a donation tell your xda nickname in paypal message so i can give you proper credits here. Thanks.
XDA:DevDB Information
NucleaROM for Moto X Style/Pure (clark), ROM for the Moto X Style (Pure)
Contributors
antariksh, Hashbang173
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.1.x
ROM Firmware Required: Stock Nougat 7.0
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: Initial Release
Beta Release Date: 2018-01-01
Created 2018-01-01
Last Updated 2018-03-03

Doing this because everyone does it.

Consider this as my excitement! xDD

A new year Gift. Thank you for keeping our device alive. Downloading now, gonna flash soon. Cheers!!

This looks awesome and I'm trying to install it but every time I try to wipe the old ROM, the phone just reboots. I'm on the Carbon by obsolete1, any ideas?

ccic2491 said:
This looks awesome and I'm trying to install it but every time I try to wipe the old ROM, the phone just reboots. I'm on the Carbon by obsolete1, any ideas?
Click to expand...
Click to collapse
Use this TWRP, it's built for Nougat Based ROMs
OP updated.

antariksh said:
Use this TWRP, it's built for Nougat Based ROMs
OP updated.
Click to expand...
Click to collapse
Sorry mate but can you provide me recovery img to flash through twrp?
Need a twrp for nougat
My pc is broken

andreskafe said:
Sorry mate but can you provide me recovery img to flash through twrp?
Need a twrp for nougat
My pc is broken
Click to expand...
Click to collapse
You can flash the recovery.img from TWRP itself. Go to the directory and tap 'Install Image' button. Select the recovery partition and flash.

ROM has been pretty stable for me, good amount of customization without overkill.
Performance is snappy, about equal to Hashbang's LOS that this is based on but with similar bugs, I'm guessing likely kernel & modem related:
• Wifi-Calling being on still causes silence when a call connects (Simple Mobile). Also makes me think that having it off is causing a lot of calls to go straight to voicemail instead of ringing.. could be coincidence
• Had the no notification/ringers/alarms bug initially but swapping my own sound files in, giving them the proper permissions, reboot with a dalvik & cache clear and it worked again (before on LOS and I think RR I had to replace audio xml files for it to work which i think caused new different audio related issues)
• Usual slow camera, flashlight bugs, no big deal
Really interested in the MicroG features and curios whether something has to be done in the ROM specifically to set it up. Would it improve battery life enough to go through the trouble?

acyd said:
• Had the no notification/ringers/alarms bug initially but swapping my own sound files in, giving them the proper permissions, reboot with a dalvik & cache clear and it worked again (before on LOS and I think RR I had to replace audio xml files for it to work which i think caused new different audio related issues)
Click to expand...
Click to collapse
I dont have this issue on NR. Funny enough. I did om rest.
I see no real hickups. All working here. Full pulldown on notifacation/ followed by edit, will freeze a sec, and go back to home screen, but just once each time - no biggie. Just a edit problem, once set up np.
But would like to see an option to see ram usage in recent, not just omni, no fan of omni Lol personal prefference. Absolut not a must, just so used to have it there.
Other than this GJ, new dayly driver. Ty. :highfive:
If my help can be used for some, just throw a holla OP :good:

acyd said:
ROM has been pretty stable for me, good amount of customization without overkill.
Performance is snappy, about equal to Hashbang's LOS that this is based on but with similar bugs, I'm guessing likely kernel & modem related:
• Wifi-Calling being on still causes silence when a call connects (Simple Mobile). Also makes me think that having it off is causing a lot of calls to go straight to voicemail instead of ringing.. could be coincidence
• Had the no notification/ringers/alarms bug initially but swapping my own sound files in, giving them the proper permissions, reboot with a dalvik & cache clear and it worked again (before on LOS and I think RR I had to replace audio xml files for it to work which i think caused new different audio related issues)
• Usual slow camera, flashlight bugs, no big deal
Really interested in the MicroG features and curios whether something has to be done in the ROM specifically to set it up. Would it improve battery life enough to go through the trouble?
Click to expand...
Click to collapse
Thank for the feedback.
Link me your audio files, I'll take a look and compare if anything is missing.
ROM boot and works without GApps. I have been installing test builds without GApps. You just have to manually install each apk and restore contacts.
Only thing that affects battery when using ROM with GApps is Location History, you can turn it off. Also you can disable Google Assistant so it won't run background processes to detect OK Google. It would get you almost similar battery life, as using without it.
As for WiFi-Calling, I don't think so we have that in India, so I can't test or even try to debug.

Dioser said:
I dont have this issue on NR. Funny enough. I did om rest.
I see no real hickups. All working here. Full pulldown on notifacation/ followed by edit, will freeze a sec, and go back to home screen, but just once each time - no biggie. Just a edit problem, once set up np.
But would like to see an option to see ram usage in recent, not just omni, no fan of omni Lol personal prefference. Absolut not a must, just so used to have it there.
Other than this GJ, new dayly driver. Ty. :highfive:
If my help can be used for some, just throw a holla OP :good:
Click to expand...
Click to collapse
Sure, Thanks. I just started getting into this stuff, so I'll try to get as much as help from the community itself.
Umm.. RAM usage in Recent? Have you seen any other ROM with that feature? It will be good for some reference, if am attempting to do that.

antariksh said:
Sure, Thanks. I just started getting into this stuff, so I'll try to get as much as help from the community itself.
Umm.. RAM usage in Recent? Have you seen any other ROM with that feature? It will be good for some reference, if am attempting to do that.
Click to expand...
Click to collapse
RR have this feature m8. Likewise CR. So my guess is most los. But cant seem to find it anywhere here. Went it all through step by step.
But its not a must in any kind.
Ill go look for the settings in RR also if you need med to?
I have no device with RR atm, but an s5 with CR nougat. I guess its maybe an aosp recents? Says so in CR recent screen settings, if any help. Have no SD card back before tomorow, and ill then reflash RR and screen the settings. Ill add two of CR settings. Its on Sgs5 though, but they look the same, and had the same on the xt1572 RR/CR
Im no developer my self.
But done some dif testing back in the days with insanity and slim. those days. So by me saying holla if need help, is could you test this for me, then OFC!

Dioser said:
RR have this feature m8. Likewise CR. So my guess is most los. But cant seem to find it anywhere here. Went it all through step by step.
But its not a must in any kind.
Ill go look for the settings in RR also if you need med to?
I have no device with RR atm, but an s5 with CR nougat. I guess its maybe an aosp recents? Says so in CR recent screen settings, if any help. Have no SD card back before tomorow, and ill then reflash RR and screen the settings. Ill add two of CR settings. Its on Sgs5 though, but they look the same, and had the same on the xt1572 RR/CR
Im no developer my self.
But done some dif testing back in the days with insanity and slim. those days. So by me saying holla if need help, is could you test this for me, then OFC!
Click to expand...
Click to collapse
I also have RR Unofficial build released in other thread. I'll check out. Thanks

Hi
Thanks alot for your great work on this smooth rom
The only issue that i have until now is the recent button that coudnt be changeable , its gray and i can't change that split screen to another function

antariksh said:
I also have RR Unofficial build released in other thread. I'll check out. Thanks
Click to expand...
Click to collapse
Yeah i saw u threw it up, but didnt try it bro

Low on anyones priority.. but has anyone tried this rom with Fly Delta app to access their Delta account ?
I have reports it will work on stock nougat rom for clark.. I have mm modem , have never installed stock N.. but no custom N rom I have tried for clark will it work on
Thanks

antariksh said:
Thank for the feedback.
Link me your audio files, I'll take a look and compare if anything is missing.
ROM boot and works without GApps. I have been installing test builds without GApps. You just have to manually install each apk and restore contacts.
Only thing that affects battery when using ROM with GApps is Location History, you can turn it off. Also you can disable Google Assistant so it won't run background processes to detect OK Google. It would get you almost similar battery life, as using without it.
As for WiFi-Calling, I don't think so we have that in India, so I can't test or even try to debug.
Click to expand...
Click to collapse
Thanks for your work on this and reply. What audio files are you referring to? I just have my own ogg & wav files which i put into the subdirectories in /system/meda/audio and delete the stock ones, change permissions and go from there.
Regarding the MicroG, my most recent knowledge is from here: https://lineage.microg.org/#instructions which mentions a MicroG settings app that masks itself sets up "google" services for the apps that require it. GCM etc. That's what I was looking for but didn't find here so was just wondering It's open-source as far as I know, would it be possible to include in some future version of the ROM?
Another bug I've had recently is phone calls not waking the screen.

I am absolutely happy with the ROM. Not finding anything wrong. Being a moderate user I feel Nuclea works perfectly. A small glitch while opening camera. It takes a bit more time than usual. Otherwise no issues.

chandruilkal said:
I am absolutely happy with the ROM. Not finding anything wrong. Being a moderate user I feel Nuclea works perfectly. A small glitch while opening camera. It takes a bit more time than usual. Otherwise no issues.
Click to expand...
Click to collapse
Try ditch the linage cam for moto cam.
https://androidfilehost.com/?fid=673791459329060250
I know I did :good: (flahsable zip)

Better Mobile App

welcome