Related
Hi
I have here a G4 with the stock OS/rom that really interests me. Its the vodafone PTG rom wich i need to flash on another g4 i have that is in english.
The question is : how can i do a rom from that wizard ?
Thanks !
PS. of course i can upload the rom for anyone who needs if after
First you must know if the phone is CID unlocked
If it is then just get "mtty" and make a "r2sd all"
If it's not then i think you must do it by steps using programs like awizard
cheers
PS:
anyone feel free to correct please
i dont think its cid unlocked, almost for sure that is locked
I Cant Make Full Backup, Need Help (g4) Cingular 8125 Sim & Cid Unlocked
I have tryied everything nothing had worked I'm able to Backup OS & Extended Rom. Not a nubby even doing sd backup happens same thing I can make individual backup like IPL, SPL, Extended Rom, OS ect. But I want full backup and I cant. When I use aWizard it does great job but on the radio.nba part this is the message that comes out. I have tryied everithing all the programs availables on all forum this has been a 8 day proyect please some one can help me. HELP HELP HELP HELP HELP HELP HELP HELP HELP. ITS A CINGULAR 8125 (G4) UNLOCKED SIM & CID BY CHECK-IMEI. PLEASE SOMEBODY ANY ADVISE.
THIS IS DOING IT WITH SD
r2sd all
R2SDBackup() Pls. insert SD card !!
Cmd>r2sd all
***** user area size = 0x3B880000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
Start address = 0x80000000 , Length = 0x800
Start address = 0x80000800 , Length = 0xC0000
Start address = 0x800C0800 , Length = 0x40000
Start address = 0x80100800 , Length = 0x280000
GSM - dwSize = 345DF
GSM Page0
Start address = 0x4E3D4C0 , Length = 0x3900000
Start address = 0x743D4C0 , Length = 0xA00000
The read size is not matched, load failed!
Some Image (8) load failed, we can not backup All images...
Cmd>
============== aWizard 1.3 beta 2 ===============
- By ahlok_hk -
__________________________________________
- [Credits] -
- itsme for 'itsutils' -
- MachinaGod for 'RapiUnlocker' -
- MachinaGod for 'lokiwiz' -
- mamaich for 'WM5 ROM editing tool' -
- psneddon and kenu for Logo Converter -
- nicob for scripting tips -
- xda-developers.com, buzzdev.net n oths -
__________________________________________
* Please Choose one of the following options:
a - View README file
e - Enable RAPI (Run this after each hard reset)
u - Unlock CID (!!!PLEASE RUN THIS ONE TIME FIRST!!!)
b - Backup Radio, OS and Extended ROM from device
s - Write Backup Splash Logo (.nba) to Wizard
c - Convert + write BMP(240x320) Splash Logo to Wizard
r - Write Radio ROM to device (!! RUN unlock CID 1st !!)
w - Write OS ROM to device (!! RUN unlock CID 1st !!)
q - Quit this program
__________________________________________
!!! ATTENTION! Please use this tool at your own risk!!!
__________________________________________
* Type letter then press [Enter]:B
* Backup Wizard ROM Version 1.0
* Please enter the name of "folder" to save the ROM image to (e.g. "QT-1_6_3_4-W
WE"), no space pls
* Then press [Enter], or q to to main menu:radio
* Backup Radio ROM? (y/n/q):Y
* Backup OS ROM? (y/n/q):N
* Backup Extended ROM? (y/n/q):N
* Backup Splash ROM and HTC Logo? (y/n/q):N
* Please make sure the following before running this option:
* - your have connected your Wizard to the PC with USB ActiveSync connection,
* - already run the option 'e' at least once after the last time you hard reset
the Wizard
* then press [Enter] to start, or q to main menu:
[14:29:32.28] Backup Radio ROM [ROM\radio\radio-Radio.nba] Start
* This process takes about 5 to 8 minutes depends on CPU Speed.
* Please wait.....
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 39 07 01 06 27 2c 17 3e 17 05 06 ec
CopyTFFSToFile(0x50000, 0x280000, ROM\radio\radio-Radio.nba)
ERROR: ITReadDisk: outbuf==NULL
[14:30:18.59] Backup Radio ROM [ROM\radio\radio-Radio.nba] End
Press any key to continue . . .
rebeldishman: dude--This is the 3rd post of this information (at least) from you. Post it once and be patient. By the way, it has been answered already in the other forum.)
--sigh.
I Cant Make Full Backup, Need Help (g4) Cingular 8125 Sim & Cid Unlocked
--------------------------------------------------------------------------------
I have tryied everything nothing had worked I'm able to Backup OS & Extended Rom. Not a nubby even doing sd backup happens same thing I can make individual backup like IPL, SPL, Extended Rom, OS ect. But I want full backup and I cant. When I use aWizard it does great job but on the radio.nba part this is the message that comes out. I have tryied everithing all the programs availables on all forum this has been a 8 day proyect please some one can help me. HELP HELP HELP HELP HELP HELP HELP HELP HELP. ITS A CINGULAR 8125 (G4) UNLOCKED SIM & CID BY CHECK-IMEI. PLEASE SOMEBODY ANY ADVISE.
THIS IS DOING IT WITH SD
r2sd all
R2SDBackup() Pls. insert SD card !!
Cmd>r2sd all
***** user area size = 0x3B880000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
Start address = 0x80000000 , Length = 0x800
Start address = 0x80000800 , Length = 0xC0000
Start address = 0x800C0800 , Length = 0x40000
Start address = 0x80100800 , Length = 0x280000
GSM - dwSize = 345DF
GSM Page0
Start address = 0x4E3D4C0 , Length = 0x3900000
Start address = 0x743D4C0 , Length = 0xA00000
The read size is not matched, load failed!
Some Image (8) load failed, we can not backup All images...
Cmd>
============== aWizard 1.3 beta 2 ===============
- By ahlok_hk -
__________________________________________
- [Credits] -
- itsme for 'itsutils' -
- MachinaGod for 'RapiUnlocker' -
- MachinaGod for 'lokiwiz' -
- mamaich for 'WM5 ROM editing tool' -
- psneddon and kenu for Logo Converter -
- nicob for scripting tips -
- xda-developers.com, buzzdev.net n oths -
__________________________________________
* Please Choose one of the following options:
a - View README file
e - Enable RAPI (Run this after each hard reset)
u - Unlock CID (!!!PLEASE RUN THIS ONE TIME FIRST!!!)
b - Backup Radio, OS and Extended ROM from device
s - Write Backup Splash Logo (.nba) to Wizard
c - Convert + write BMP(240x320) Splash Logo to Wizard
r - Write Radio ROM to device (!! RUN unlock CID 1st !!)
w - Write OS ROM to device (!! RUN unlock CID 1st !!)
q - Quit this program
__________________________________________
!!! ATTENTION! Please use this tool at your own risk!!!
__________________________________________
* Type letter then press [Enter]:B
* Backup Wizard ROM Version 1.0
* Please enter the name of "folder" to save the ROM image to (e.g. "QT-1_6_3_4-W
WE"), no space pls
* Then press [Enter], or q to to main menu:radio
* Backup Radio ROM? (y/n/q):Y
* Backup OS ROM? (y/n/q):N
* Backup Extended ROM? (y/n/q):N
* Backup Splash ROM and HTC Logo? (y/n/q):N
* Please make sure the following before running this option:
* - your have connected your Wizard to the PC with USB ActiveSync connection,
* - already run the option 'e' at least once after the last time you hard reset
the Wizard
* then press [Enter] to start, or q to main menu:
[14:29:32.28] Backup Radio ROM [ROM\radio\radio-Radio.nba] Start
* This process takes about 5 to 8 minutes depends on CPU Speed.
* Please wait.....
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 39 07 01 06 27 2c 17 3e 17 05 06 ec
CopyTFFSToFile(0x50000, 0x280000, ROM\radio\radio-Radio.nba)
ERROR: ITReadDisk: outbuf==NULL
[14:30:18.59] Backup Radio ROM [ROM\radio\radio-Radio.nba] End
Press any key to continue . . .
Hello,
I need help unlocking (simlocked - pda is working) Qtek 8500 from austrian "ONE" provider. Also, I need to change language (from german to english). Since I am new in this windows based phones, I would appreciate any help u people can provide me...
I cant unlock it online, since I dont have paypal account. My country is not listed.
THANK YOU.
Dejan
Here is CID unlocking procedure, that was posted few days ago by Zone-MR. I have unlocked my Qtek8500 and installed a new ROM version 3.6.251.0. :
1. Application unlock your phone using regeditstg and do the following :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1001 = 2 -->Change the value data from 2 to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1005 = 16 --> Change the value data from 16 to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128 --> Change the value data from 128 to 144
Reboot the phone
2. Run SDA_ApplicationUnlock tool. Reboot the phone after it finishes.
3. Download itsutil.zip from http://www.xs4all.nl/~itsme/projects/xda/tools.html , version from 2005-6-28. There is even newer version, but with that version you can not use pdocread without arguments.
4. Connect the phone with activesync
5. Run Command Prompt, go to subfolder named "build" in itsutils folder, and run pdocread without arguments
6. Note the value of "uniqueid". It will be something like : "00 00 00 00 12 03 02 14 3b 07 1b b2 04 05 07 54"
7. run pdocread again with these arguments : "pdocread -n 1 0x000000 0x10000 -b 0x4000 original-bdk1.nb". This will make original-bdk1.nb file in build folder (where the pdocread is located).
8. Upload this file and value of uniqueid to http://www.spv-developers.com/strtrkCID/. It will open a new page after few seconds. Go to bottom of the page and click the link "Download patched BDK1"
9. Download the file (it will be named like "supercidxxxxxxx.bin) to "build" folder
10. Run the pdocwrite from command prompt with these arguments : "pdocwrite -n 1 supercidxxxxxxx.bin 0x000000 0x10000 -b 0x4000". Replace supercidxxxxxxx.bin with the original name of downloaded file from step 9.
11. Wait 15-20 seconds and that is it. Reboot the phone and install the ROM you like
Still not working...
Thank you damird,
I have done everything as you described. Now I have ROM ver. 3.6.251.0 downoaded from ftp.xda...
But my Qtek is still SIM LOCKED!! When I insert sim card, following message appears:
NETWORK IS LOCKED. PLEASE INPUT UNLOCK CODE.
Please help me with this.
IMEI Check
well, i think you have to use the imei check solution
http://www.imei-check.co.uk/f600unlock.php
Cant use imei check
Imei check will be the problem, since my country is not listed in paypal. Simply cant pay it!
Is there any other option?
Paypal
send me the money, i'll pay for you !!!!!
envelope?
All I can do is to send u the money inside trackable envelope. It is not secure, but if I couldnt find other option, I will do that. THANK YOU! It would be 20 GBP, right?
Please wait week or two in order to find another solution... If not, I will contact you.
Thank you again.
How can I find out the value of DOCID?
How can I find out the value of DOCID? What is DOCID?
damird said:
Here is CID unlocking procedure, that was posted few days ago by Zone-MR. I have unlocked my Qtek8500 and installed a new ROM version 3.6.251.0. :
1. Application unlock your phone using regeditstg and do the following :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1001 = 2 -->Change the value data from 2 to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1005 = 16 --> Change the value data from 16 to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128 --> Change the value data from 128 to 144
Reboot the phone
2. Run SDA_ApplicationUnlock tool. Reboot the phone after it finishes.
Click to expand...
Click to collapse
I cannot edit register to change setup, the access id denied....
How can I unlock my phone? Note it is not branded and it works with all SIM, but if I install a new ROM it refuse it...
thanks for the help
In order to connect the XT1528 to DFS tool, I have followed the following steps. YMMW.
1. Install Motorola usb driver
2. Edit c:/Program Files/Common Files/Motorola Shared/Mobile Drivers/Drivers/motoport.inf
Add the following lines
Code:
; MotoE XT1528
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EC1&MI_00
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EC1&MI_01
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EC1&MI_02
; MotoE XT1528
3. Restart windows
4. Reboot the phone in Bootloader mode - (Vol. down + power)
5. Select "BP Tools" (Use Vol +/- & power button for selection)
6. Connect the Phone to windows using USB cable.
7. In device manager you can see the Motorola QC Diag port
8. This port can be used to connect to DFS tool.
Thanks.
Thanks for the heads up
kmani.k78 said:
In order to connect the XT1528 to DFS tool, I have followed the following steps. YMMW.
1. Install Motorola usb driver
2. Edit c:/Program Files/Common Files/Motorola Shared/Mobile Drivers/Drivers/motoport.inf
Add the following lines
Code:
; MotoE XT1528
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EC1&MI_00
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EC1&MI_01
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EC1&MI_02
; MotoE XT1528
3. Restart windows
4. Reboot the phone in Bootloader mode - (Vol. down + power)
5. Select "BP Tools" (Use Vol +/- & power button for selection)
6. Connect the Phone to windows using USB cable.
7. In device manager you can see the Motorola QC Diag port
8. This port can be used to connect to DFS tool.
Thanks.
Click to expand...
Click to collapse
I Know.......you are going to help me ... I can not install the QC Mode Diag . When I connect the phone to the computer being it started in BP Tools appears as shown in the picture 1 (not shown me QC Diag , just 3 equal devices) , then get the id of hardware as shown in Figure 2. We add the line that appears in the image 3. restart the PC, restart the phone in BP Tools mode and keep getting the same. What am I doing wrong ? I have a Moto E XT1524
There are two section in the motoport.inf file. One for 32bit OS & other for 64bit OS. You pl check where you have added these lines. What is you OS?
Then, You need to change the last two digits as MI_00, MI_01 & MI_02 each one for separate device.
kmani.k78 said:
There are two section in the motoport.inf file. One for 32bit OS & other for 64bit OS. You pl check where you have added these lines. What is you OS?
Then, You need to change the last two digits as MI_00, MI_01 & MI_02 each one for separate device.
Click to expand...
Click to collapse
Hi!, I have a windows 8.1 64 bits... I added the lines that you told me, the way it is in the attached ... but I still do not succeed
pablo_cba said:
Hi!, I have a windows 8.1 64 bits... I added the lines that you told me, the way it is in the attached ... but I still do not succeed
Click to expand...
Click to collapse
I am also using 64 bit OS. Try attached one without any modification. If it is not work change to PID to match yours.
kmani.k78 said:
I am also using 64 bit OS. Try attached one without any modification. If it is not work change to PID to match yours.
Click to expand...
Click to collapse
Is not working... Sorry but whats PID?
I feel it my duty as a person with a long experience of flashing CDMA phones to PagePlus to basically let everyone know that mucking around your phone with DFS can lead to very bad things if you don't know what you're doing.
Sent from my XT1528 using XDA Free mobile app
Right click on the moto device in the Device manager, Update driver, Browse locally & navigate to the motoport.inf folder, click ok.
This will work.
Thanks for figuring this out.
For the XT1527, it needs the following instead:
; MotoE XT1527
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EC5&MI_00
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EC5&MI_01
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EC5&MI_02
; MotoE XT1527
Click to expand...
Click to collapse
hi - did you take SPC (MSL ) from those phone ? and how you do it ?
Any chance this will work with pure xt 1575? Not sure what I need to change to get it to connect.
Still no luck but I did find my vid and uid.
Added these lines:
Code:
; MotoX XT1575
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EE5&MI_00
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EE5&MI_01
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EE5&MI_02
; MotoX XT1575
Using qpst it can read the esn and phone number but phone is unkown and will not connect to programming. It did that before making these changes to the driver.
Please help me
kmani.k78 said:
In order to connect the XT1528 to DFS tool, I have followed the following steps. YMMW.
1. Install Motorola usb driver
2. Edit c:/Program Files/Common Files/Motorola Shared/Mobile Drivers/Drivers/motoport.inf
Add the following lines
Code:
; MotoE XT1528
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EC1&MI_00
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EC1&MI_01
%USBMOTQCDIAGPORT% = USBMOTPORT, USB\VID_22B8&PID_2EC1&MI_02
; MotoE XT1528
3. Restart windows
4. Reboot the phone in Bootloader mode - (Vol. down + power)
5. Select "BP Tools" (Use Vol +/- & power button for selection)
6. Connect the Phone to windows using USB cable.
7. In device manager you can see the Motorola QC Diag port
8. This port can be used to connect to DFS tool.
Thanks.
Click to expand...
Click to collapse
---------
please help
I have a Motorola E (2nd generation) whith 4g lite xt1528 android version 5.1
I want to make it in a mode diag
To appear in the DFS program
but I could not
Although I erected definitions
Show me in Device Manager
Unknown Device:
XT1528
XT1528
XT1528
I use Windows 10 64-bit
Is there a way fabricators or lines in a file motoport.inf
What are the lines that fabricators in that file and how
Please help me
I should be grateful to you
Required :
- Driver Qualcomm for Windows
- QPST_2.7.422.zip
- Driver ADB Installer
- Modem Lenovo A6000/A6000+ include ADB fastboot
- Extrac Modem in drive C:\adb and open the folder
** Edit file qcn use HxD change IMEI and Convert IMEI
SIM 1
Sector 343 Offset 0002AE50 point 00-08
Change 08 8A 76 21 04 22 57 85 45 adjust to you IMEI-1
SIM 2
Sector 188 Offset 000178E0 point 00-08
Change 08 8A 76 21 04 22 57 85 26 adjust to you IMEI-2
** Step change IMEI :
1. Open Convert IMEI
2. Write you IMEI-1 and klik Convert
3. Open HxD
4. Press Ctrl + F write/copas 08 8A 76 21 04 22 57 85 45 Datatype Hex-values Direction All - Ok
5. Replace it with IMEI-1 numbers convert results
6. Write you IMEI-2 and klik Convert
7. Open HxD
8. Press Ctrl + F write/copas 08 8A 76 21 04 22 57 85 26 Datatype Hex-values Direction All - Ok
9. Replace it with IMEI-2 numbers convert results
10. Close HxD and save file qcn
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
** For those who use stock rom not need root can be directly executed steps :
1. Install driver qualcomm, qpst, adb installer
2. Open the folder C:\adb
3. Press and hold down the Shift + Right Click - Open command windows here
4. Sign in fastboot mode button (vol- & power) and type :
fastboot erase modem (enter)
fastboot erase modemst1 (enter)
fastboot erase modemst2 (enter)
fastboot flash modem NON-HLOS.bin (enter)
fastboot flash modem modemst1.bin (enter)
fastboot flash modem modemst2.bin (enter)
5. Turn off the phone remove the battery
6. Sign test mode button (vol+ & Power)
7. Open QPST software download
8. Tab Restore
9. Browse PORT Qualcomm Diag
10. If you already connect, browse file QCN
11. Select the edited file QCN use hex editor
12. Tick Allow phone/file ESN mismatch
13. Start (wait for the process)
14. Reboot phone
15. Check the IMEI
16. Check signal SIM-1 the WCDMA/LTE only
17. Finished :laugh:
** For those who use custom rom / are not able to enter the test mode must root stock rom steps:
1. Root
2. Open SuperSU settings default access to Grant
3. Turn off the phone
4. Proceed to step 1 to 5
5. Turn on the phone
6. Install Terminalemulator.apk
7. Open terminalemulator type su (enter)
8. Type setprop sys.usb.config diag, adb (enter)
9. Continue to restore files qcn step 7 to finish
Special thanks :
- Allah SWT.
- Carlos Spitzer
- fawazahmed0
- Robby Primarizal
- Hanif Nurul Huda
- Amri Gadroen
- All member (OFFICIAL INDONESIA) LENOVO A6000 INA
@zround - Just in case, you are feeling low due to no response from anyone. Brother, what you did was a much much needed thing, as many of the A6000 users are having IMEI problems on flashing custom ROMs. This thread is definitely a life saver for the guy having IMEI issue.
Sometimes, you don't get much appreciation from others in the beginning (has happened with me), but that doesn't mean you stop doing so.
So, all I wanna say is "thanks" and I really appreciate what you did.
:silly:
sasukay said:
@zround - Just in case, you are feeling low due to no response from anyone. Brother, what you did was a much much needed thing, as many of the A6000 users are having IMEI problems on flashing custom ROMs. This thread is definitely a life saver for the guy having IMEI issue.
Sometimes, you don't get much appreciation from others in the beginning (has happened with me), but that doesn't mean you stop doing so.
So, all I wanna say is "thanks" and I really appreciate what you did.
:silly:
Click to expand...
Click to collapse
@sasukay if there is no response means i think they managed to restore IMEI Lenovo A6000/+ in my way, :angel: i'm not proud of the appreciation and responses but can share and help others who seemed to me it was really fun.
let's drink a cup of coffee so as not to panic
zround said:
@sasukay if there is no response means i think they managed to restore IMEI Lenovo A6000/+ in my way, :angel: i'm not proud of the appreciation and responses but can share and help others who seemed to me it was really fun.
let's drink a cup of coffee so as not to panic
Click to expand...
Click to collapse
Hehhehhe.....I was just being dramatic... :silly:
hi sir,
i have lenovo a 6000.problem both imei null .when i try to write the qcn from ur guide.but in ur 9th step when i select the diag phone it shows no phone connected in qpst window.any solution please.
rajendrakumar said:
hi sir,
i have lenovo a 6000.problem both imei null .when i try to write the qcn from ur guide.but in ur 9th step when i select the diag phone it shows no phone connected in qpst window.any solution please.
Click to expand...
Click to collapse
if you use a stock rom then how to enable diag port android to turn off the device to unplug the battery and then press and hold the button (vol + & power) until the entrance test mode and plug the USB cable
or
by turning on the device (root) pairs terminalemulator.apk open to write:
su
setprop sys.usb.config diag, adb
restore qcn :good:
This saved my life thank you so much. Love from philippines bro
Unable to mount /modem
Bro.. ini udah ikutin sampe step 5, lalu pas gua nyalain malah stuck di logo booting. Coba clear cache via TWRP ada tulisan "Unable to mount /modem". Kira2 itu knp ya ? hehehe masih noob
waw steady
LYudhistira said:
Bro.. ini udah ikutin sampe step 5, lalu pas gua nyalain malah stuck di logo booting. Coba clear cache via TWRP ada tulisan "Unable to mount /modem". Kira2 itu knp ya ? hehehe masih noob
Click to expand...
Click to collapse
Step :
Masuk fastboot dan erase semua partisi, (boot, userdata, cache, system, modem, modemst1, modemst2)
Flash stock rom Lollipop via qfil qpst atau qualcomm downloader
Root
Masuk fastboot dan eksekusi
fastboot erase modem
fastboot erase modemst1
fastboot erase modemst2
fastboot flash modem NON-HLOS.bin
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
Restore qcn
Hello, my imei's are good but error in network (cannot connect to selected network ) after writing qcn (without editing ) only SIM 1 worked with network but sim 2 not working > but after editing with my imei's no network .. any suggestions i need booth sims to work!?
Sobaro said:
Hello, my imei's are good but error in network (cannot connect to selected network ) after writing qcn (without editing ) only SIM 1 worked with network but sim 2 not working > but after editing with my imei's no network .. any suggestions i need booth sims to work!?
Click to expand...
Click to collapse
- That's because the modem partition problem,
- try
fastboot erase modem
fastboot erase modemst1
fastboot erase modemst2
fastboot flash modem NON-HLOS.bin
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
- after that restore qcn already in the edit imei previous,
if still not successful,
then delete all partitions (boot, splash, userdata, cache, system) via fastboot, and then flash a stock rom via qfil or qualcomm downloader continued upgrading to latest stock rom, then restore qcn.
thanx that worked for me , now i get the two sims to work like a charm but still second imei is showing null !! i have no problem as long as sims are working but it is good if some one give a reason! thanx in advance
wrongly restored efs,modem... partitions from a lenovo a6000+ to another a6000
wrongly restored efs,modem... partitions (using TWRP) from a lenovo a6000+ to another a6000
i have no backups of the corresponding partitions of this phone
now phone showing imei null and sim detection errors also ui getting unstable and services are unstable in stock rom (most times) when flashed using qualcomm downloader & bootloops in other some custom roms.
fastboot,recovery etc of the phone is perfectly working.
when i did writing the altered qcn (with corresponding imei) via qpst i got just errors.
can anyone help me troubleshoot this ??
https://drive.google.com/file/d/0BwFcGoIexiPed210VXdnY2xUYU0/view?usp=sharing
zround said:
Required :
- Driver Qualcomm for Windows
- QPST_2.7.422.zip
- Driver ADB Installer
- Modem Lenovo A6000/A6000+ include ADB fastboot
- Extrac Modem in drive C:\adb and open the folder
** Edit file qcn use HxD change IMEI and Convert IMEI
SIM 1
Sector 343 Offset 0002AE50 point 00-08
Change 08 8A 76 21 04 22 57 85 45 adjust to you IMEI-1
SIM 2
Sector 188 Offset 000178E0 point 00-08
Change 08 8A 76 21 04 22 57 85 26 adjust to you IMEI-2
** Step change IMEI :
1. Open Convert IMEI
2. Write you IMEI-1 and klik Convert
3. Open HxD
4. Press Ctrl + F write/copas 08 8A 76 21 04 22 57 85 45 Datatype Hex-values Direction All - Ok
5. Replace it with IMEI-1 numbers convert results
6. Write you IMEI-2 and klik Convert
7. Open HxD
8. Press Ctrl + F write/copas 08 8A 76 21 04 22 57 85 26 Datatype Hex-values Direction All - Ok
9. Replace it with IMEI-2 numbers convert results
10. Close HxD and save file qcn
** For those who use stock rom not need root can be directly executed steps :
1. Install driver qualcomm, qpst, adb installer
2. Open the folder C:\adb
3. Press and hold down the Shift + Right Click - Open command windows here
4. Sign in fastboot mode button (vol- & power) and type :
fastboot erase modem (enter)
fastboot erase modemst1 (enter)
fastboot erase modemst2 (enter)
fastboot flash modem NON-HLOS.bin (enter)
fastboot flash modem modemst1.bin (enter)
fastboot flash modem modemst2.bin (enter)
5. Turn off the phone remove the battery
6. Sign test mode button (vol+ & Power)
7. Open QPST software download
8. Tab Restore
9. Browse PORT Qualcomm Diag
10. If you already connect, browse file QCN
11. Select the edited file QCN use hex editor
12. Tick Allow phone/file ESN mismatch
13. Start (wait for the process)
14. Reboot phone
15. Check the IMEI
16. Check signal SIM-1 the WCDMA/LTE only
17. Finished :laugh:
** For those who use custom rom / are not able to enter the test mode must root stock rom steps:
1. Root
2. Open SuperSU settings default access to Grant
3. Turn off the phone
4. Proceed to step 1 to 5
5. Turn on the phone
6. Install Terminalemulator.apk
7. Open terminalemulator type su (enter)
8. Type setprop sys.usb.config diag, adb (enter)
9. Continue to restore files qcn step 7 to finish
Special thanks :
- Allah SWT.
- Carlos Spitzer
- fawazahmed0
- Robby Primarizal
- Hanif Nurul Huda
- Amri Gadroen
- All member (OFFICIAL INDONESIA) LENOVO A6000 INA
Click to expand...
Click to collapse
Using Window 10, I'm not able to perform 1s step) Shift + click anywhere in folder, I think driver is not supported
2) not able to install terminal emulator bcz unknown source blocked and not working .
I edited the QCN file but unable to move forward from first step,
What should I do,
No communiction device , no imei, no bluetootgh, no wifi.
Should I use windows 7? Also how to install terminal apk if unknown source is not getting enabled for security purpose? Can I perform these steps on MM custom roms?
zround said:
Step :
Masuk fastboot dan erase semua partisi, (boot, userdata, cache, system, modem, modemst1, modemst2)
Flash stock rom Lollipop via qfil qpst atau qualcomm downloader
Root
Masuk fastboot dan eksekusi
fastboot erase modem
fastboot erase modemst1
fastboot erase modemst2
fastboot flash modem NON-HLOS.bin
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
Restore qcn
Click to expand...
Click to collapse
Bro ganteng...
Abis ngikutin langkah tersebut di atas
Ane malah got Baseband: Unknown
Panik...
Trust flash page Downloaded yg Ada do ....kitkat_ROW.zip
baseband balik...
Imei Null
Trus Masukin imei pake program imei writter
Jadi
Normal
Tapi "tetep no service"
What's should I do ya Gan?
Any other method Kali Gan...
BTW... Makasih banyak udah menginspirasi
rifky said:
Bro ganteng...
Abis ngikutin langkah tersebut di atas
Ane malah got Baseband: Unknown
Panik...
Trust flash page Downloaded yg Ada do ....kitkat_ROW.zip
baseband balik...
Imei Null
Trus Masukin imei pake program imei writter
Jadi
Normal
Tapi "tetep no service"
What's should I do ya Gan?
Any other method Kali Gan...
BTW... Makasih banyak udah menginspirasi
Click to expand...
Click to collapse
Lollipop only om bosku, :laugh:
pankajy said:
Using Window 10, I'm not able to perform 1s step) Shift + click anywhere in folder, I think driver is not supported
2) not able to install terminal emulator bcz unknown source blocked and not working .
I edited the QCN file but unable to move forward from first step,
What should I do,
No communiction device , no imei, no bluetootgh, no wifi.
Should I use windows 7? Also how to install terminal apk if unknown source is not getting enabled for security purpose? Can I perform these steps on MM custom roms?
Click to expand...
Click to collapse
Try opening of adb cmd wear this in windows 10
- Flash stock rom lollipop
- Then follow these instructions
If you still can not, then tried to use windows 7 because I put windows 7 when executed
zround said:
Lollipop only om bosku, :laugh:
Click to expand...
Click to collapse
thanks...
AWALE PANCEN LOLLIPOP Gan
it is lollipop lho...
i decide to flash KITKAT because, the BaseBand Unknown show up after trying flash it back with lollipop Bro...
ngono lho
but finally it is back to lollipop again now, of course with All time "No Service" message
yesterday... i try to do all those wonderfull steps of yours again...
but alhamdulillaah... i have no luck... yet
actually... what is the lolllipop version of the phone should be to do those step you wrote
because i did it with my A6000 using the latest lollipop 5.0.2 / Kraft-A6000_S061_100727, is it matter? (singing Nothing Else Matters)
and would you please checkput my attachment please, did you see anything wrong there?
btw, where did you get those modem, modemst1, modemst2 & non-hlos bin files from? would you mind share it with us
always thanks in advanced
Sobaro said:
thanx that worked for me , now i get the two sims to work like a charm but still second imei is showing null !! i have no problem as long as sims are working but it is good if some one give a reason! thanx in advance
Click to expand...
Click to collapse
really? you did it?
so glad to know that :good:
congrat man
would you please tell me what version of firmware do you have?
mine is like in the attachment
Thanks in advance