New in android world, having moto e , unlocked bootloader twrp flashed supersu installed foldermount installed. I rooted my phone to get extra space for system, everything working fine, now i got system update alert,i downloaded the update but after download phone rebooted and open with twrp, not able to install new updae from motorola, when i reboot system in twrp its booted but goes to next reboot and open with twrp again and again.....how i update my phone?
Flash STOCK RECOVERY and Go to System -> Check for System Updates -> Download & Install..
or
Follow this thread
->>> http://forum.xda-developers.com/moto-e/general/4-4-4-ota-update-zip-file-t2811397 <<<-
mrpkarthik said:
Flash STOCK RECOVERY and Go to System -> Check for System Updates -> Download & Install..
or
Follow this thread
->>> http://forum.xda-developers.com/moto-e/general/4-4-4-ota-update-zip-file-t2811397 <<<-
Click to expand...
Click to collapse
Please help me to get stock recovery and help me to flash it
just flash the zip from the thread
Go to the thread already mentioned and download the twrp flashable update.zip. copy it to your device. Now follow these steps:
1: power off your device
2: Press volume down+power button at the same time(pressing volume from a little before helps) for 7-10 seconds.
3. In twrp select install
4. Go to the location of the zip and select it, then flash it.( do not wipe data+cache)
5.reboot
need step by step procedure to install MIUI 6.5.4.2
on lenovo p780_row_8G_s226_140919 rooted.
degaonkarab said:
need step by step procedure to install MIUI 6.5.4.2
on lenovo p780_row_8G_s226_140919 rooted.
Click to expand...
Click to collapse
Here you are:
1. download MIUI for ROW firmware(be careful most are for CN based firmware)
2. copy on SD CARD not Internal Mermory
3. Install custom recovery TWRP if you dont have
4. reboot to TWRP
5. in TWRP go to wipe not advance wipe
6. swipe to wipe
7. go back to install
8. press install
9. find in to your sd card MIUI archive
10. select archive and swipe to install
11. do not wipe after install
12. reboot to system
13. wait for 5 to 10 minute untill MIUI starts. do not wory at the beggining the phone will start more slow.
14. Good Luck
thanks
it worked
Hi, are you new to installing custom ROMs? you don't know where to start? I didn't either
WELCOME TO MY GUIDE TO INSTALL CUSTOM ROMs (NOOB SPECIAL)Things you need to install a custom ROM:
1. A Grand Prime
2. A PC
3. A Data Transfer Wire
4. Some Time and Patience
5. And A working Brain
First things firstUpgrade to Android 5.0.2 stock from samsung
If you are already on 5.0.2 you can skip this step
If you can't update from the device from the phone use this method
1. Download Odin
https://odindownload.com/download/#.W9Bm1GgzbIU
2. Download the stock firmware from this site for your device
https://samsung-firmware.org/ (note search for your baseband version upto SMG53XXXX (Replace XXXX with your baseband version)
3. Shot down your device
4. Press these Keys at once
VOLUME DOWN+HOME+POWER
5. It will show you a warning sign but get past it by pressing VOLUME UP
6. Plug your device into the computer
7. Start Odin
8. Select PDA and select the extracted Firmware file for your device
9. Select start
10. Wait for the device to reboot
Congratulations on completing the first step :good:
Moving on to installing TWRP
1. Find your device code name from this table
SM-G530T/T1/W - gprimelte
SM-G530P - gprimeltespr
SM-S920L - gprimeltetfnvzw
SM-G530MU - gprimeltezt
SM-G530FZ - gprimeltexx
SM-G530M - fortunalteub
SM-G530H (XX) - fortuna3g
SM-G530H (XC) - fortunave3g
2. Head over to this site and download the right .tar file for your device
3. Shut down your device
4. Press VOLUME DOWN+HOME+POWER button
5. Press VOLUME UP
6. Open Odin (Connect your device)
7. Select TWRP .tar file for your device
8. Make sure to uncheck Force Reboot option (to unlock boot loader of your device)
9. Hit Start
10. After completing hit VOLUME UP+HOME+POWER button from the download mode
11. You Have successfully installed TWRP
Next Step
DOWNLOAD A ROM1. Head over to the grand prime development Forum at XDA
2. Select any Thread
3. Download the ROM for your device
4. Download GApps (ARM + ANDROID VERSION OF THE ROM + PICO, MICRO, STOCK)
5. Move them to Internal storage or SD card.
6. Shut down your device.
7. Press VOLUME UP+HOME+POWER
8. In TWRP, select Backup if you want
9. Select Wipe
10. Click on Advanced Wipe
11. Select Delvic/ART Cache , System, Cache, and Data
12. Swipe to wipe
13. Head over to Install
14. Locate the ROM and GApps
15. Select ROM.zip and then click on Add more Zips
16. Select GApps
17. Swipe to install.
18. Wait for it to finish
19. Click reboot device
20. Wait for it to reboot.
21. Setup the ROM.
22. Enjoy
IF YOU BRICKED YOUR DEVICE
Easy fix here
Just flash the Stock ROM via Odin
That's it
HOPE YOU GUYS LIKED IT AND IF I HELPED YOU PRESS THAT :good: THANKS BUTTON
Rom g530mu
Friend unfortunately my model G530MU has no other than 4.4.4, did not leave ROM 5.x
https:// samsung-firmware.org/model/SM-G530MU/
lahsej said:
Friend unfortunately my model G530MU has no other than 4.4.4, did not leave ROM 5.x
https:// samsung-firmware.org/model/SM-G530MU/
Click to expand...
Click to collapse
I'm sorry my friend
:crying:
lahsej said:
Friend unfortunately my model G530MU has no other than 4.4.4, did not leave ROM 5.x
https:// samsung-firmware.org/model/SM-G530MU/
Click to expand...
Click to collapse
try a rom for fortunalteub...if you soft brick your device you can easily go back reflashing a stock rom
INSTALL CUSTOM ROMS USING BELOW INSTRUCTIONS
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2. Install Adb drivers on windows if you are using windows or if you are using linux install adb drivers in linux
INSTALLATION PROCEDURE
1. Download Custom Roms i will provide the links by the end
2. download TWRP
3. Example iam On Stock rom
4. Now i want to Flash Any one of custom rom but how?
> Be ready with Any custom Roms from below example i wilL Flash Pixel Experience Rom
> Be ready with twrp-3.3.0-0
>Turn of your phone and switch to download Mode & Connect phone to pc
4. Now flash twrp using cmd command "fastboot flash boot twrp.img"
5. now your phone boots to twrp
6. now copy the custom rom to phone using twrp dont worry mtp working
7. flash the rom and wait or 5 min for installing
8. now check your slot example iam on Slot A
9. now tap on reboot to recovery now you will again boot in to twrp
10. now change the slot from A to B by tapping reboot ,slot B
11. now you are on slot B now flash gapps for all the roms except Pixel Experience and flash magisk for root if you want using magisk manager zip file
12. now click on wipe & advance wipe now wipe all except system & vendor and tap on reboot system
13. now you people will see pixel experience Boot animation wait for 7 min to boot up and the rom is yours and same method for all custom roms installation
Click here For Custom Roms Links Please Hit Thanks Button If You Understand My Guide. Keep Going...!!!
Thank you
Thanks a lot for spending time on these guides! Made the process simple for even new comers!
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
[Update#1]
Today I have managed to install the Android Beta 3.1 [ is beta software and I don't recommend using it as your daily os]
https://sourceforge.net/projects/nippongsi/files/Pixel%20-%20Pixel4a_SBeta3.1%20-%20TBO42ZZ8IF/Pixel4a_SBeta3.1-AB-12-20210727-nippongsi.img.gz/download
you can download the ROM file from Nippon's Sourceforge
every step is the same and you just have to change the rom as this
there's a bug that developer setting crash the settings app and it is working but it does have some lots of bugs, and screen lock is not working but I'll try to fix it and upload the method
if your device get boot looped, press Bixby + power + vol down to boot into download mode and flash the stock AP file using Odin
[I was supposed to edit the upper one but accidentally created as a reply ]
Just go to UPDATE#2
Skuld Norniern said:
Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)
Click to expand...
Click to collapse
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
thongass000 said:
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
Click to expand...
Click to collapse
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Skuld Norniern said:
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Click to expand...
Click to collapse
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
thongass000 said:
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
Click to expand...
Click to collapse
Sorry for being late!!
for me, I do have the same issue with wired audio and I have not been able to find a way to fix it yet
if I manage to fix the issue I will fix the main article
Skuld Norniern said:
Skuld Norniern said:
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
Click to expand...
Click to collapse
Hello sir i can't find havoc os 4.5 in:https://download.havoc-os.com/?dir=arm64-ab
Click to expand...
Click to collapse
After flashing twrp on my sm g885f, cant get into terp,
mine shows volume down + power to restart, not to enter turn off
how can i enter into twrp
Skuld Norniern said:
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
Click to expand...
Click to collapse
'os.img file' where
, guess i fixed it
when installing Certification_Patch.zip, it shows command error
what i found- this patch is for G885FDXS5CUL1, mine is
G885FDXU5CUG1