need step by step procedure to install MIUI 6.5.4.2
on lenovo p780_row_8G_s226_140919 rooted.
degaonkarab said:
need step by step procedure to install MIUI 6.5.4.2
on lenovo p780_row_8G_s226_140919 rooted.
Click to expand...
Click to collapse
Here you are:
1. download MIUI for ROW firmware(be careful most are for CN based firmware)
2. copy on SD CARD not Internal Mermory
3. Install custom recovery TWRP if you dont have
4. reboot to TWRP
5. in TWRP go to wipe not advance wipe
6. swipe to wipe
7. go back to install
8. press install
9. find in to your sd card MIUI archive
10. select archive and swipe to install
11. do not wipe after install
12. reboot to system
13. wait for 5 to 10 minute untill MIUI starts. do not wory at the beggining the phone will start more slow.
14. Good Luck
thanks
it worked
Related
New in android world, having moto e , unlocked bootloader twrp flashed supersu installed foldermount installed. I rooted my phone to get extra space for system, everything working fine, now i got system update alert,i downloaded the update but after download phone rebooted and open with twrp, not able to install new updae from motorola, when i reboot system in twrp its booted but goes to next reboot and open with twrp again and again.....how i update my phone?
Flash STOCK RECOVERY and Go to System -> Check for System Updates -> Download & Install..
or
Follow this thread
->>> http://forum.xda-developers.com/moto-e/general/4-4-4-ota-update-zip-file-t2811397 <<<-
mrpkarthik said:
Flash STOCK RECOVERY and Go to System -> Check for System Updates -> Download & Install..
or
Follow this thread
->>> http://forum.xda-developers.com/moto-e/general/4-4-4-ota-update-zip-file-t2811397 <<<-
Click to expand...
Click to collapse
Please help me to get stock recovery and help me to flash it
just flash the zip from the thread
Go to the thread already mentioned and download the twrp flashable update.zip. copy it to your device. Now follow these steps:
1: power off your device
2: Press volume down+power button at the same time(pressing volume from a little before helps) for 7-10 seconds.
3. In twrp select install
4. Go to the location of the zip and select it, then flash it.( do not wipe data+cache)
5.reboot
DISCLAIMER : Rooting or flashing custom roms results breaking the warranty of the device. Me and Custom Roms authors are not responsible for any damage which is incurred in the process of flashing custom roms or rooting the device. We highly advice to take a backup of your device prior to performing the process.
For Installing Custom Rom In your Lenovo A6000/+ Follow This
*-------------------------------------*----------------------------------------------*
##Download Your Custome Rom And Compatiable GApps file Which You want to install in Your Mobile And Copy All in Your Sd Card.
##.Download This Zip File and extract it using 7zip or winrar:--> https://drive.google.com/open?id=0Bzk1MbGP5MepTklURFVzSm1ETzQ
###First You have to install custom recovery in your cell for installing Custom Rom ,for that
Install Custome Recovery in Lenovo A6000 / Plus:
---------------------------------------------------------------------
Step 1. Connect your Lenovo A6000/A6000+ to your PC by enabling USB Debugging mode from Developer options in Settings. If you cant find the developer options, Goto Settings> About Phone> Device Information. Tap 7 times on the Build Number. Now you can find the developers options in Settings.
Step 2. After connecting, Select USB Storage device (Open USB Storage).
Step 3. Extract the downloaded files. Copy SuperSU.zip from the zip file into your SDcard or Internal Storage.
Step 4. Now,
Click adb.exe
Click fastboot.exe
Then, Open command.bat from the extracted folder & type one by one all command.
1--> adb devices (Explain- it ll show you list of devices attached)
2-->adb reboot bootloader (Explain-The above command will boot your device into bootloader mode. As soon as you enter this command, you would see A Lenovo Logo with small text ,powerkey long press can reboot phone at the bottom of the screen.)
3-->fastboot flash recovery recovery.img (Explain-This would replace the stock recovery with TWRP Recovery.)
Step 5.Now switch off your device & remove the USB cable and Battery,after 5 seconds plug your battery in. Press & Hold VolumeUp+VolumeDown+ Power button simultaneously.
Step 6. You will see the Custome Recovery in your device
Step 7. Goto Backup. Select System, data, boot & swipe to confirm. It will start creating backup of your device. If in case anything goes wrong, you can restore this backup and can save your cell rather running through posts & asking for help.
Step 8. Goto Wipe>Advanced Wipe>Select Wipe cache, Wipe Dalvik cache, Format System, Wipe data. Swipe for Yes! It will take 10-30secs to wipe all the selected data.
Step 9. Now Go to Install, locate the downloaded ROM file & swipe to Install the ROM file. After the ROM flashing process gets completed again goto Install & Flash the GApps file.
Step 10. After everything is done, wipe cache & dalvik cache.(Optional)
Now Reboot your device.....
Step 11. That�s it! First boot might take 2-3 minutes. Dont worry! Setup your Google Account & restore all your apps.
Voila! You Have Successfully Installed Your Custom Rom And Enjoy.......
**To Root Lenovo A6000 / Plus:
--------------------------------------------
You Can Use Kingroot App - http://kingroot.en.uptodown.com/android
Or
Follow All The Guide Through Step 6 And Then
Step 1. Select Install zip from your Custome Recovery & locate the SuperSU.zip file you downloaded from above link.
Step 2. Swipe to confirm Installation of zip.
Step 3. Done! You have successfully rooted your Lenovo A6000 & A6000 Plus
Qualcomm Usb Drive For Lenovo A6000/+ : https://drive.google.com/file/d/0Bzk1MbGP5MepWFlmLTVlOG9DalE/view
If You Guys Finding Any Problem Please Comment Below
Please Press Thanks If I Helped It Will Encourage Me
my root will be lost on installling custom recovery on my phone??
without installing any custom roms..? @ShivaY
Sent from my Lenovo A6000 using XDA Labs
excellent
perfect explanation
please post a video and also updatepost with pics
Flashed the F2FS TWRP recovery using your guide. Thanks a lot bro.. Gonna flash RR 7.1 with GAPPS pico.
Hi, are you new to installing custom ROMs? you don't know where to start? I didn't either
WELCOME TO MY GUIDE TO INSTALL CUSTOM ROMs (NOOB SPECIAL)Things you need to install a custom ROM:
1. A Grand Prime
2. A PC
3. A Data Transfer Wire
4. Some Time and Patience
5. And A working Brain
First things firstUpgrade to Android 5.0.2 stock from samsung
If you are already on 5.0.2 you can skip this step
If you can't update from the device from the phone use this method
1. Download Odin
https://odindownload.com/download/#.W9Bm1GgzbIU
2. Download the stock firmware from this site for your device
https://samsung-firmware.org/ (note search for your baseband version upto SMG53XXXX (Replace XXXX with your baseband version)
3. Shot down your device
4. Press these Keys at once
VOLUME DOWN+HOME+POWER
5. It will show you a warning sign but get past it by pressing VOLUME UP
6. Plug your device into the computer
7. Start Odin
8. Select PDA and select the extracted Firmware file for your device
9. Select start
10. Wait for the device to reboot
Congratulations on completing the first step :good:
Moving on to installing TWRP
1. Find your device code name from this table
SM-G530T/T1/W - gprimelte
SM-G530P - gprimeltespr
SM-S920L - gprimeltetfnvzw
SM-G530MU - gprimeltezt
SM-G530FZ - gprimeltexx
SM-G530M - fortunalteub
SM-G530H (XX) - fortuna3g
SM-G530H (XC) - fortunave3g
2. Head over to this site and download the right .tar file for your device
3. Shut down your device
4. Press VOLUME DOWN+HOME+POWER button
5. Press VOLUME UP
6. Open Odin (Connect your device)
7. Select TWRP .tar file for your device
8. Make sure to uncheck Force Reboot option (to unlock boot loader of your device)
9. Hit Start
10. After completing hit VOLUME UP+HOME+POWER button from the download mode
11. You Have successfully installed TWRP
Next Step
DOWNLOAD A ROM1. Head over to the grand prime development Forum at XDA
2. Select any Thread
3. Download the ROM for your device
4. Download GApps (ARM + ANDROID VERSION OF THE ROM + PICO, MICRO, STOCK)
5. Move them to Internal storage or SD card.
6. Shut down your device.
7. Press VOLUME UP+HOME+POWER
8. In TWRP, select Backup if you want
9. Select Wipe
10. Click on Advanced Wipe
11. Select Delvic/ART Cache , System, Cache, and Data
12. Swipe to wipe
13. Head over to Install
14. Locate the ROM and GApps
15. Select ROM.zip and then click on Add more Zips
16. Select GApps
17. Swipe to install.
18. Wait for it to finish
19. Click reboot device
20. Wait for it to reboot.
21. Setup the ROM.
22. Enjoy
IF YOU BRICKED YOUR DEVICE
Easy fix here
Just flash the Stock ROM via Odin
That's it
HOPE YOU GUYS LIKED IT AND IF I HELPED YOU PRESS THAT :good: THANKS BUTTON
Rom g530mu
Friend unfortunately my model G530MU has no other than 4.4.4, did not leave ROM 5.x
https:// samsung-firmware.org/model/SM-G530MU/
lahsej said:
Friend unfortunately my model G530MU has no other than 4.4.4, did not leave ROM 5.x
https:// samsung-firmware.org/model/SM-G530MU/
Click to expand...
Click to collapse
I'm sorry my friend
:crying:
lahsej said:
Friend unfortunately my model G530MU has no other than 4.4.4, did not leave ROM 5.x
https:// samsung-firmware.org/model/SM-G530MU/
Click to expand...
Click to collapse
try a rom for fortunalteub...if you soft brick your device you can easily go back reflashing a stock rom
INSTALL CUSTOM ROMS USING BELOW INSTRUCTIONS
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2. Install Adb drivers on windows if you are using windows or if you are using linux install adb drivers in linux
INSTALLATION PROCEDURE
1. Download Custom Roms i will provide the links by the end
2. download TWRP
3. Example iam On Stock rom
4. Now i want to Flash Any one of custom rom but how?
> Be ready with Any custom Roms from below example i wilL Flash Pixel Experience Rom
> Be ready with twrp-3.3.0-0
>Turn of your phone and switch to download Mode & Connect phone to pc
4. Now flash twrp using cmd command "fastboot flash boot twrp.img"
5. now your phone boots to twrp
6. now copy the custom rom to phone using twrp dont worry mtp working
7. flash the rom and wait or 5 min for installing
8. now check your slot example iam on Slot A
9. now tap on reboot to recovery now you will again boot in to twrp
10. now change the slot from A to B by tapping reboot ,slot B
11. now you are on slot B now flash gapps for all the roms except Pixel Experience and flash magisk for root if you want using magisk manager zip file
12. now click on wipe & advance wipe now wipe all except system & vendor and tap on reboot system
13. now you people will see pixel experience Boot animation wait for 7 min to boot up and the rom is yours and same method for all custom roms installation
Click here For Custom Roms Links Please Hit Thanks Button If You Understand My Guide. Keep Going...!!!
Thank you
Thanks a lot for spending time on these guides! Made the process simple for even new comers!
Hello guys now you can easily shifted custom rom to stock rom
Finally I found the rmx2151 stock recovery img file
Realme 7 (rmx2151) stock recovery.zip - Ydisk
How to shift custom rom to stock rom:
1. Download zip and extract it.
(Also you need ozip stock rom then go to realmeupdater, select your device and choose which rom version you download)
2. Go to recovery mode (Pitch Black Recovery)
3. Enter Install and choose recovery img file
4. select recovery and swipe right to flash it
5. Click volume down button (-) to enter stock recovery mode
6. Now you can see stock recovery, select your language to enter the recovery mode
7. Now click install from storage and then select your downloaded ozip stock rom file and click ok
8. It takes 5 or 6 minutes to flash
9. After finish flash, a pop up message show then click ok (do not click reboot)
10. Click back arrow and click Wipe data
11. Simply enter the code which is shown to you and then click Format data and click format
12. and after successfully format data click ok and then click Reboot
13. Hopefully you system is now reboot.
14. Stock rom flash successfully.
mnhc10 said:
Hello guys now you can easily shifted custom rom to stock rom
Finally I found the rmx2151 stock recovery img file
Realme 7 (rmx2151) stock recovery.zip - Ydisk
How to shift custom rom to stock rom:
1. Download zip and extract it.
(Also you need ozip stock rom then go to realmeupdater, select your device and choose which rom version you download)
2. Go to recovery mode (Pitch Black Recovery)
3. Enter Install and choose recovery img file
4. select recovery and swipe right to flash it
5. Click volume down button (-) to enter stock recovery mode
6. Now you can see stock recovery, select your language to enter the recovery mode
7. Now click install from storage and then select your downloaded ozip stock rom file and click ok
8. It takes 5 or 6 minutes to flash
9. After finish flash, a pop up message show then click ok (do not click reboot)
10. Click back arrow and click Wipe data
11. Simply enter the code which is shown to you and then click Format data and click format
12. and after successfully format data click ok and then click Reboot
13. Hopefully you system is now reboot.
14. Stock rom flash successfully.
Click to expand...
Click to collapse
Finally I found the rmx2151 stock recovery img file !!!
you can get it from extraction ofp file.
mnhc10 said:
Hello guys now you can easily shifted custom rom to stock rom
Finally I found the rmx2151 stock recovery img file
Realme 7 (rmx2151) stock recovery.zip - Ydisk
How to shift custom rom to stock rom:
1. Download zip and extract it.
(Also you need ozip stock rom then go to realmeupdater, select your device and choose which rom version you download)
2. Go to recovery mode (Pitch Black Recovery)
3. Enter Install and choose recovery img file
4. select recovery and swipe right to flash it
5. Click volume down button (-) to enter stock recovery mode
6. Now you can see stock recovery, select your language to enter the recovery mode
7. Now click install from storage and then select your downloaded ozip stock rom file and click ok
8. It takes 5 or 6 minutes to flash
9. After finish flash, a pop up message show then click ok (do not click reboot)
10. Click back arrow and click Wipe data
11. Simply enter the code which is shown to you and then click Format data and click format
12. and after successfully format data click ok and then click Reboot
13. Hopefully you system is now reboot.
14. Stock rom flash successfully.
Click to expand...
Click to collapse
Really? I still don't get it. What is that you found at last? Since if it's only stock recovery of R7 then I think anyone can send u 1 recovery image file for each version ( even that they're the same ). Pls help to enlighten me!!!
Can I use it for a Narzo 20 Pro
can you please provide me stock recovery img for rmx 2117 (Realme narzo 30 pro 5G) ?
AK_8K said:
can you please provide me stock recovery img for rmx 2117 (Realme narzo 30 pro 5G) ?
Click to expand...
Click to collapse
Download the .ofp firmware and extract recovery.img from it
my imei is gone now . I didn't have any backup now
Stano36 said:
Download the .ofp firmware and extract recovery.img from it
Click to expand...
Click to collapse
any solution for restoring imei without changing the motherboard ?
I don't have backup of partitions of my phone .