[HELP][Q&A] Xiaomi Redmi 3 Ask Away Thread - Xiaomi Redmi 3 Questions & Answers

[SIZE=+2]Welcome to
Questions Answers & Troubleshooting[/SIZE][SIZE=+2]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/SIZE]
[SIZE=+2]This thread has been created to assist owners of:[/SIZE]
[SIZE=+2]The Xiaomi Redmi 3[/SIZE]
There are no questions that are deemed insignificant
Helpful information for your device:
Specifications on GSM Arena: 2 GB variant | 3 GB variant (Pro)
Also visit The Index Project thread with a lot off additional info
ᴥ Please feel free to Ask Away anything about your device ᴥ​

[SIZE=+2]Frequently Asked Questions (FAQ)[/SIZE]​NOTE: This is still WIP and may subject to change without any notification.
Q: How many variants of Redmi 3?
A: There are ONLY two variants of Redmi 3: The regular one with 2GB RAM and 16GB internal storage, and Prime/Pro one with 3GB RAM, 32GB internal storage, and fingerprint support. Both of them have same codename (ido).
Q: Why the 3GB variant named Prime/Pro?
A: The actual intention is to distinguish the 3GB variant from 2GB (regular) one. It has been already like that since Mi Note era, where Pro variant brings better hardware than the regular one.
Q: How to reboot to recovery mode?
A: If you've flashed TWRP, you could access recovery mode by the combo of Vol(+) + Vol(-) + Power button at the same time.
Q: Will Redmi 3 ROM work on Redmi 3S?
A: No, it won't. Redmi 3S is shipped with different hardware. I'm looking on you, newcomers who are unable to view properly the subforum/thread name.

I can't boot into recovery mode after flashing TWRP. When I hold power up and power, the phone just shows me the MI logo and nothing happens.

paeschli said:
I can't boot into recovery mode after flashing TWRP. When I hold power up and power, the phone just shows me the MI logo and nothing happens.
Click to expand...
Click to collapse
I also have the same thing. However, fastboot commands seems to workaround it.
Code:
$ fastboot boot <recovery-name>
Other way is to reboot to recovery from the OS.
EDIT: Someone below me has the true answer.
Regards.
Sent from my ASUS_Z00A using XDA Labs

paeschli said:
I can't boot into recovery mode after flashing TWRP. When I hold power up and power, the phone just shows me the MI logo and nothing happens.
Click to expand...
Click to collapse
Switch off your phone then hold Vol +, Vol - and power.

What's the camera sensor using on rear camera?
What's the problem no F2FS on system while switching on TWRP?
And how much battery drain on CM?

CallMeBb said:
What's the camera sensor using on rear camera?
What's the problem no F2FS on system while switching on TWRP?
And how much battery drain on CM?
Click to expand...
Click to collapse
1) Maybe someone after me knows that...
2) Switching system partition to F2FS is worthless; ROM script may format it back to ext4 upon flashing ROM.
3) Battery life depends on your usage, configuration, and many more. I'm unable to measure it on my Redmi 3 Pro because I always flash test kernels I compiled.
Regards.
Sent from my ASUS_Z00A using XDA Labs

krasCGQ said:
1) Maybe someone after me knows that...
2) Switching system partition to F2FS is worthless; ROM script may format it back to ext4 upon flashing ROM.
3) Battery life depends on your usage, configuration, and many more. I'm unable to measure it on my Redmi 3 Pro because I always flash test kernels I compiled.
Regards.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
I try when used MIUI before, then go to Mechanical Mode (CMIIW, the sensor on rear is untitle except for front camera is using qtech sensor.
Your redmi 3 is not for daily use? I hope it you continue custom kernel since this device is still low devs support
Oh yes one more question:
Does tweak camer.zip for Redmi 3 is usable huh? i found it on yandex cloud

CallMeBb said:
Your redmi 3 is not for daily use? I hope it you continue custom kernel since this device is still low devs support
Oh yes one more question:
Does tweak camer.zip for Redmi 3 is usable huh? i found it on yandex cloud
Click to expand...
Click to collapse
1) It's my backup driver. I only use it if my ZenFone 2 goes in the trouble, after all.
2) Sure. I just wonder why no one wants to do it. zhafron is banned, yantz only for MIUI (?), also Sensei is going nowhere with it's sources nuked. So, I guess I'll be the only solo player on LineageOS 14.1, LOL.
3) I never heard it until today. So, I didn't test it yet.
Regards.
Sent from my ASUS_Z00A using XDA Labs

krasCGQ said:
1) It's my backup driver. I only use it if my ZenFone 2 goes in the trouble, after all.
2) Sure. I just wonder why no one wants to do it. zhafron is banned, yantz only for MIUI (?), also Sensei is going nowhere with it's sources nuked. So, I guess I'll be the only solo player on LineageOS 14.1, LOL.
3) I never heard it until today. So, I didn't test it yet.
Regards.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
Weeee...zhafron is doing mistake
Compared to mi4i is same 61x family but our devce not getting attention, and compard other redmi (sadly )
I I found that Redmi 3 Pro (maybe non pro too) have s5k3l8, a Samsung sensor, the pther device like Redmi 4,Redmi 3X, Redmi Note 4 (the 64 gb has too) using this sensor
You can see this :
https://www.kimovil.com/es/listado-moviles-por-modelo-de-lente/samsung-s5k3l8
https://s.kaskus.id/r540x540/images/2017/01/08/1974787_201701081050400608.jpg
Also fix the front camera when so darky is available guide on guide forum, you can add it

CallMeBb said:
Weeee...zhafron is doing mistake
Compared to mi4i is same 61x family but our devce not getting attention, and compard other redmi (sadly )
I I found that Redmi 3 Pro (maybe non pro too) have s5k3l8, a Samsung sensor, the pther device like Redmi 4,Redmi 3X, Redmi Note 4 (the 64 gb has too) using this sensor
You can see this :
https://www.kimovil.com/es/listado-moviles-por-modelo-de-lente/samsung-s5k3l8
https://s.kaskus.id/r540x540/images/2017/01/08/1974787_201701081050400608.jpg
Also fix the front camera when so darky is available guide on guide forum, you can add it
Click to expand...
Click to collapse
1) Absolutely yes. Probably due to his ROM's download links.
2) Actually the difficulty on building kernels on SD615 and SD616 is nearly same. Shown by how easy I include thunderplug from tomato, and how I cherry-pick commits from faizauthar's kernel for Mi4i.
3) Will try.
Regards.
Sent from my ASUS_Z00A using XDA Labs

i have a redmi 3 pro with 6.7.21 beta by xiaomi.eu here...
not sure which rom to flash. i have a twrp installed. does that mean the bootloader is unlocked for sure? what's the easiest way to check bootloader status? can i flash any room with twrp? thanks.

callmejones said:
i have a redmi 3 pro with 6.7.21 beta by xiaomi.eu here...
not sure which rom to flash. i have a twrp installed. does that mean the bootloader is unlocked for sure? what's the easiest way to check bootloader status? can i flash any room with twrp? thanks.
Click to expand...
Click to collapse
You could check it on a simple menu in MIUI's developer options.
Sent from my ASUS_Z00A using XDA Labs

went through it twice. what's that menu in dev options?

callmejones said:
went through it twice. what's that menu in dev options?
Click to expand...
Click to collapse
I forgot, since I move to MoKee as soon as the device goes unlocked.
You could try also via "fastboot oem device-info" fastboot command while on fastboot mode.
Sent from my ASUS_Z00A using XDA Labs

Hello, i can't access phone onver ftp using filezilla and different soft on phone. I'm on AICP

Doom question :
How i can get 4G on Beta MIUI version ( version : 7.1.19 ) without change device name on build prop?
i tried how to get 4G on same guide in this xda but nothing happen

Hello.
i m running on last Miui global stable 8.0.3.0 rom.
Is there any baseband to use in Europe?
Currently installed is V012.

Xpresso38 said:
Hello.
i m running on last Miui global stable 8.0.3.0 rom.
Is there any baseband to use in Europe?
Currently installed is V012.
Click to expand...
Click to collapse
I don't think there are different baseband versions, unless you're switching from Global ROM to China ROM and vice versa.
Sent from my Redmi 3 using XDA Labs

Hello.
On Frecnh forum
i've seen 13 different version of baseband for redmi 3 s.
Do you think it's compatible with redmi 3 ?

Related

[HELP THREAD] Ask any questions [NOOB FRIENDLY]

Welcome everyone!​This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!
Regards,
PoseidonKing
COMMON NOOB QUESTIONS
1. How to unlock the bootloader of my Redmi Note 3? <<Click Here>>
2. How do I root my Redmi Note 3 after I have unlocked it? <<Click Here>>
3. How do I install a custom recovery like TWRP? <<Click Here>>
4. How to flash custom ROMs or Developer editions of MiUi? <<Click Here>>
5. Which ROM is the best for Redmi Note 3? <<Click Here>>
Hit Thanks if I Helped You!
Regards,
PoseidonKing
Reserved
After flashing the latest MIUI8 6.11.3 global developer ROM my GPS is not active always. I found it while using Endomondo running & walking apps it is working good on global stable.
any help must be appreciated .
Triggered from my Nexus 10
amitroutray said:
After flashing the latest MIUI8 6.11.3 global developer ROM my GPS is not active always. I found it while using Endomondo running & walking apps it is working good on global stable.
any help must be appreciated .
Triggered from my Nexus 10
Click to expand...
Click to collapse
Mine is working fine..check if it's running on high accuracy mode or not under Settings-additional settings-privacy-location..
yes it is on high accuracy only but do not know why it is not working properly. and thanks for your concern.
Triggered from my Nexus 10
amitroutray said:
yes it is on high accuracy only but do not know why it is not working properly. and thanks for your concern.
Triggered from my Nexus 10
Click to expand...
Click to collapse
This maybe stupid..but did you check if those apps have location permission on?..is Google maps working?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes it has. One thing I observed today while useing Endomondo it is working perfectly but when screen is off the GPS is not working and it remain idle. Once screen is on everything working perfectly.
I have also enabled Never sleep inside Lock Screen & Password.
Triggered from rn3
amitroutray said:
Yes it has. One thing I observed today while useing Endomondo it is working perfectly but when screen is off the GPS is not working and it remain idle. Once screen is on everything working perfectly.
I have also enabled Never sleep inside Lock Screen & Password.
Triggered from rn3
Click to expand...
Click to collapse
Have you updated your phone to 6.11.24?.try that..And try locking the app in the multitasking menu by swiping it down.
But the official one is 6.11.3 and I am waiting for the OTA.
Edit: Now OTA is showing 172 mb. Thanks
Triggered from rn3
amitroutray said:
But the official one is 6.11.3 and I am waiting for the OTA.
Edit: Now OTA is showing 172 mb. Thanks
Triggered from rn3
Click to expand...
Click to collapse
Try going to app battery saver in security app
reddevils4017 said:
Try going to app battery saver in security app
Click to expand...
Click to collapse
Are you referring to this one??
Triggered from rn3
Is there any way to know beforehand which fingerprint scanner your device will have? I'm interested in running Cyanogenmod only which officially supports the FPC1020 one, but not the Goodix.
Maybe international vs chinese version?
This really makes or breaks my decision so any knowledge would be greatly appreciated. Don't feel like gambling and I don't wanna return it to china or let it collect dust in a drawer.
Otherwise this seems like a great device.
Thanks in advance!
amitroutray said:
Are you referring to this one??
Triggered from rn3
Click to expand...
Click to collapse
This one
schallwert said:
Is there any way to know beforehand which fingerprint scanner your device will have? I'm interested in running Cyanogenmod only which officially supports the FPC1020 one, but not the Goodix.
Maybe international vs chinese version?
This really makes or breaks my decision so any knowledge would be greatly appreciated. Don't feel like gambling and I don't wanna return it to china or let it collect dust in a drawer.
Otherwise this seems like a great device.
Thanks in advance!
Click to expand...
Click to collapse
Check out this thread
http://forum.xda-developers.com/redmi-note-3/help/fp-sensor-fpc-goodix-t3459250
Hi i want the instrictions to:
1:>Unlock the bootloader (unofficially)
2:>which twrp{i want a twrp that can support miui beta rom and cm and rr roms and if not then i want a recovery just or cm and rr roms}
3:>which miui to use for unlocking bootloader
4:>how to root
5:>stable + volte supported latest android 7 rom.
Please help me
Thanks in advance.
Njaiker said:
This one
Click to expand...
Click to collapse
My Battery saver is off.
Triggered from rn3
---------- Post added at 11:07 AM ---------- Previous post was at 10:58 AM ----------
Njaiker said:
Have you updated your phone to 6.11.24?.try that..And try locking the app in the multitasking menu by swiping it down.
Click to expand...
Click to collapse
Updated to latest build now. How to locking the app in the multitasking menu..??
Another thing I have the ZCX recovery with Support MIUI-OTA option enabled. But can't flash the incremental updates first time. I have to download the whole update every time
Triggered from rn3
amitroutray said:
My Battery saver is off.
Triggered from rn3
---------- Post added at 11:07 AM ---------- Previous post was at 10:58 AM ----------
Updated to latest build now. How to locking the app in the multitasking menu..??
Another thing I have the ZCX recovery with Support MIUI-OTA option enabled. But can't flash the incremental updates first time. I have to download the whole update every time
Triggered from rn3
Click to expand...
Click to collapse
You can lock an app by sliding it down in the multitasking menu and tapping the lock button.(screenshot attached)
I cannot tell you much about ZCX as I am still trying to unlock my phone and I am stuck with "couldn't verify device : current account is different from the account info on the device" . Still you can check out this thread it has an FAQ section in the OP try those steps.
http://forum.xda-developers.com/redmi-note-3/how-to/zcx-twrp-install-twrp-flash-supersu-t3462448
Njaiker said:
You can lock an app by sliding it down in the multitasking menu and tapping the lock button.(screenshot attached)
I cannot tell you much about ZCX as I am still trying to unlock my phone and I am stuck with "couldn't verify device : current account is different from the account info on the device" . Still you can check out this thread it has an FAQ section in the OP try those steps.
http://forum.xda-developers.com/redmi-note-3/how-to/zcx-twrp-install-twrp-flash-supersu-t3462448
Click to expand...
Click to collapse
Thanks for the reply
I am having the same issue. My unlocking is also stuck at 50%. One guy said just apply again with a different mail ID. After I received uthorization I am able to unlock it.
Triggered from rn3
amitroutray said:
Thanks for the reply
I am having the same issue. My unlocking is also stuck at 50%. One guy said just apply again with a different mail ID. After I received uthorization I am able to unlock it.
Triggered from rn3
Click to expand...
Click to collapse
thank you , I will surely try this.

[ROM PORT][MIUI 8.1.3 multilanguage][5.0.2] Zopo Speed 7/ 7 plus ZP951-ZP952

HTML:
include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you.*/
MIUI 8 for Zopo Speed 7 / 7+​
This rom has been crossported from Xiaomi Redmi Note 2 (MT6795) to this device.
What works?
Audio
Wifi
Bluetooth-a2dp
Camera (photo and video recording)
RIL
GPS
FM
Sensors
Dual apps
Second space
...... All items that I have tested
What doesn't ?
One handheld mode (this device doesn´t have hardware buttons )
Stuff that I might have not noticed
Changelog
Base china 8.1.3 from xiaomi.eu
Download
ROM
Installation
You need to flash over zopo stock Lollipop rom, it will not work over marshmallow rom
Rom on zopo speed 7+ (ZP952) has been not tested
Download the ROM
Put the zip files on your phone
Reboot in Recovery
Wipe Data/System/Cache/Dalvik cache-ART
Install zip file
Reboot system
Enjoy MIUI
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits
Xiaomi
Xiaomi.eu
Yow Bushkie
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock lollipop
Based On: Miui 8.1.3 china version
"Tap to wake" is working?
mstdzw said:
"Tap to wake" is working?
Click to expand...
Click to collapse
No that option on miui rom
Enviado desde mi Redmi Note 3 mediante Tapatalk
The german language is included?
[Edit]
Tested installtion without success using carliv touch recovery 6.6.1...
ERROR MESSAGE:
- Formatting system partition...
E: Installation error in /sdcard/Mods/MIUI_ZP951_V8.1.3.0.LHMCNDI.zip (Status 0)
On TWRP 3.0.2 it doesn´t work too...
Do i need an other recovery?
Echse27 said:
The german language is included?
[Edit]
Tested installtion without success using carliv touch recovery 6.6.1...
ERROR MESSAGE:
- Formatting system partition...
E: Installation error in /sdcard/Mods/MIUI_ZP951_V8.1.3.0.LHMCNDI.zip (Status 0)
On TWRP 3.0.2 it doesn´t work too...
Do i need an other recovery?
Click to expand...
Click to collapse
You need to flash over Lollipop stock rom and lollipop recovery.
Enviado desde mi HM 1S mediante Tapatalk
pocaropa said:
You need to flash over Lollipop stock rom and lollipop recovery.
Enviado desde mi HM 1S mediante Tapatalk
Click to expand...
Click to collapse
First i have installed the 5.0.1. Stock Rom via FlashTool.
Then i have unlooked the Bootloader, and installed the carliv cwm.
After that i have copied the .zip file onto the sdcard and reboot to recovery
Then i installed the zip file via menu inside carliv without success.. The error describet above...
The i have testet the twrp recovery 3.0.2 because i think it where possible, that the recovery made the problems...
But also there no way to flash...
At first the system partition can´t be unmountet, but you can choose to mount and unmount this partition in menu.
Second error then ist the data patition can´t be mountet...
So i was on stock lolipop and on a recovery for lolipop...
Echse27 said:
First i have installed the 5.0.1. Stock Rom via FlashTool.
Then i have unlooked the Bootloader, and installed the carliv cwm.
After that i have copied the .zip file onto the sdcard and reboot to recovery
Then i installed the zip file via menu inside carliv without success.. The error describet above...
The i have testet the twrp recovery 3.0.2 because i think it where possible, that the recovery made the problems...
But also there no way to flash...
At first the system partition can´t be unmountet, but you can choose to mount and unmount this partition in menu.
Second error then ist the data patition can´t be mountet...
So i was on stock lolipop and on a recovery for lolipop...
Click to expand...
Click to collapse
1-You need to flash stock ROM 5.1.1 ( you can install twrp recovery on flashtools because on 5.1.1 bootloader is not locked).
TWRP 3.0.0 working for ZP951 (Speed 7)--->https://www.androidfilehost.com/?fid=529152257862702271
Stock 5.1.1 link for ZP951 (Speed 7)--->https://1drv.ms/u/s!AroDeKB1ADpEuS1SBLMNKkuBcKlt
Stock 5.1.1 link for ZP952 (Speed 7 Plus)--->https://1drv.ms/u/s!AroDeKB1ADpEuUTBFTB0R9hn8C29
2-After installing Rom and recovery let the system boot one time.
3-Reboot to recovery and proceed to install miui rom. (Ignore "system partition can´t be unmounted" message)
PD: First boot takes loooooong
Tested 2 times and working
pocaropa said:
1-You need to flash stock ROM 5.1.1 ( you can install twrp recovery on flashtools because on 5.1.1 bootloader is not locked).
TWRP 3.0.0 working for ZP951 (Speed 7)--->https://www.androidfilehost.com/?fid=529152257862702271
Stock 5.1.1 link for ZP951 (Speed 7)--->https://1drv.ms/u/s!AroDeKB1ADpEuS1SBLMNKkuBcKlt
Stock 5.1.1 link for ZP952 (Speed 7 Plus)--->https://1drv.ms/u/s!AroDeKB1ADpEuUTBFTB0R9hn8C29
2-After installing Rom and recovery let the system boot one time.
3-Reboot to recovery and proceed to install miui rom. (Ignore "system partition can´t be unmounted" message)
PD: First boot takes loooooong
Tested 2 times and working
Click to expand...
Click to collapse
Ok... thank you for the guide...
Now i have installed the rom and i will give a feedback when i have tested some features...
greetz
[Edit]
You´re right, the first boot after flashing this rom tooks 15 minutes.
This MIUI 8 runs really smooth on ZP951... great work!!!
The only thing i missed is the standard implementation of root access in permisson app. But that´s a change of miui.
Do anybody know, how i can root miui 8? KingRoot or some other app? Or is there a flashable zip out there?
Greetz
Echse27 said:
Ok... thank you for the guide...
Now i have installed the rom and i will give a feedback when i have tested some features...
greetz
[Edit]
You´re right, the first boot after flashing this rom tooks 15 minutes.
This MIUI 8 runs really smooth on ZP951... great work!!!
The only thing i missed is the standard implementation of root access in permisson app. But that´s a change of miui.
Do anybody know, how i can root miui 8? KingRoot or some other app? Or is there a flashable zip out there?
Greetz
Click to expand...
Click to collapse
For root install supersu zip via recovery:
https://redirect.viglink.com/?forma...s3-us-west-2.amazonaws.com/s...1612051815.zip
Enviado desde mi MI 5s mediante Tapatalk
I've flashed this one
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip?retrieve_file=1
and it works great...
So thanks for this miui port for this official exotical device!
Greetz...
I have zopo speed 7 plus 952 version with C.M 12.1 installed with twrp recovery ,cann i flash directly overvrite to C.M 12.1 miui or must first flash original 952 rom and ,twrp recovery and miui. C.M work fine only not working manual network search an i live on Hungary border and this is problem. I want to try with miui whether it works on my Xiaomi mi max work great manual search network. Thanx in advance.
Author said:
I have zopo speed 7 plus 952 version with C.M 12.1 installed with twrp recovery ,cann i flash directly overvrite to C.M 12.1 miui or must first flash original 952 rom and ,twrp recovery and miui. C.M work fine only not working manual network search an i live on Hungary border and this is problem. I want to try with miui whether it works on my Xiaomi mi max work great manual search network. Thanx in advance.
Click to expand...
Click to collapse
If you are on cm12.1 you can flash directly after wipe data, cache and dalvik.
Before installing, do a full backup because the rom is not tested on ZP952.
Enviado desde mi MI 5s mediante Tapatalk
pocaropa said:
If you are on cm12.1 you can flash directly after wipe data, cache and dalvik.
Before installing, do a full backup because the rom is not tested on ZP952.
Enviado desde mi MI 5s mediante Tapatalk
Click to expand...
Click to collapse
@pocaropa thanx in advance I will flash it tomorrow or overmorning and of course report whether miui at 952 functions. Thank you.
Good night.
Author said:
@pocaropa thanx in advance I will flash it tomorrow or overmorning and of course report whether miui at 952 functions. Thank you.
Good night.
Click to expand...
Click to collapse
Ok, in case that doesn't work, I think I can make a patch.
Good night
Enviado desde mi MI 5s mediante Tapatalk
pocaropa said:
Ok, in case that doesn't work, I think I can make a patch.
Good night
Enviado desde mi MI 5s mediante Tapatalk
Click to expand...
Click to collapse
Hi i flash today Miui on my Speed 7 plus version 952.
I flash over C.M 12.1 in twrp delete Dalvik cache,system and data , after flashing Miui i wait cca 10 minutes and phone started.
Wifi work excellent, I restore from my Xiaomi mi max all data and apps wow ,therefore work Miui cloud etc ,great .
Google working,email i use Yahoo working.
Manual the network search I tried a couple of times and left it on the network that I chose. I happy happy happy ,no moore Hungary network .
Internet point is ok, I have a choice of 3g or 4g wow.
Bluetoth work with sinchronising on my Xiaomi smartband . Other possibilities for not using Bluetooth .
Now all I have to try to flash the super and then xposed. This while I'll make how it all works.
Phoning I have not tried it while I try to hear the report and it will.
English was not exactly the best exclusively German and Croatian, so I took a little help from Google Translate. But I think it's quite understandable.
Author said:
Hi i flash today Miui on my Speed 7 plus version 952.
I flash over C.M 12.1 in twrp delete Dalvik cache,system and data , after flashing Miui i wait cca 10 minutes and phone started.
Wifi work excellent, I restore from my Xiaomi mi max all data and apps wow ,therefore work Miui cloud etc ,great .
Google working,email i use Yahoo working.
Manual the network search I tried a couple of times and left it on the network that I chose. I happy happy happy ,no moore Hungary network .
Internet point is ok, I have a choice of 3g or 4g wow.
Bluetoth work with sinchronising on my Xiaomi smartband . Other possibilities for not using Bluetooth .
Now all I have to try to flash the super and then xposed. This while I'll make how it all works.
Phoning I have not tried it while I try to hear the report and it will.
English was not exactly the best exclusively German and Croatian, so I took a little help from Google Translate. But I think it's quite understandable.
Click to expand...
Click to collapse
Good to know that is working on ZP952 too. Thanks for report:good:
pocaropa said:
Good to know that is working on ZP952 too. Thanks for report:good:
Click to expand...
Click to collapse
No problem pocaropa , thanx thank you for your superb job.
I wil report for for possible bugs and others .
Super su installed fork fine.
Here flash xposed everything works now have a module xMUI. One potential problem has until then rebooted the system after the reboot shows me that the breakdown of memory error that now the phone is not safe. Perhaps what an idea what it was.
Author said:
No problem pocaropa , thanx thank you for your superb job.
I wil report for for possible bugs and others .
Super su installed fork fine.
Here flash xposed everything works now have a module xMUI. One potential problem has until then rebooted the system after the reboot shows me that the breakdown of memory error that now the phone is not safe. Perhaps what an idea what it was.
Click to expand...
Click to collapse
Do you mean after install xposed? This is a warning to user ( is normal)
pocaropa said:
Do you mean after install xposed? This is a warning to user ( is normal)
Click to expand...
Click to collapse
No after install Xposed ,before installed .
Only phone work fine .Now I am afraid to flash again. It works well if we rule be any problems then I will see how to proceed. I have yet to test how it works GPS and navigation have Sygic, so I'll answer it. And I have yet to try a call.
Here today I finally tried and GPS navi at Zoop, after starting the GPS and start Sygic navigation within 5 seconds I was found on a map exactly to the meter. Super.
So I tried to talk, signal and sound are excellent. The other party can hear clearly and so I did.
The main speaker produces a loud sound may be a bit deafening but it is not Miui guilty.
So for now, my rating for this Rom 1-5 is the fifth .
@pocaropa You've done an excellent job

LineageOS not working on Redmi Note 4x?

Hello everyone, I'm new and this is my post (tho it's not new for me to mod my phone, have been doing it since Gnexus time and loved that phone until it died.)
Coming to the topic of the post, I've been trying to install the LineageOS to my redmi note 4x, but when I try to do that the TWRP locks me out with error 7 and doesn't let me go forward. Any suggestions? I've heard that the 4 SD and 4x are basically the same but with different LTE bands, so I have no clue on what is wrong.
i had the same error code when installing a rom on my apollo lite.
Please try the following:
start phone in recovery mode (twrp), go to Mount and uncheck "system"
optional: do a factory reset and
install the rom
I hope it helps you.
Greetings,
lymbra
lymbra said:
i had the same error code when installing a rom on my apollo lite.
Please try the following:
start phone in recovery mode (twrp), go to Mount and uncheck "system"
optional: do a factory reset and
install the rom
I hope it helps you.
Greetings,
lymbra
Click to expand...
Click to collapse
Thank you for the reply. System in "Mount" was already unchecked, thought the factory reset before flashing the rom apparently did the trick, as I'm seeing the boot animation of LineageOS right now. I'll post furthemore if I need anymore help.
Nfous said:
Thank you for the reply. System in "Mount" was already unchecked, thought the factory reset before flashing the rom apparently did the trick, as I'm seeing the boot animation of LineageOS right now. I'll post furthemore if I need anymore help.
Click to expand...
Click to collapse
hi. have you managed to install this?
i'm about to buy a redmi note 4x and i need to know if redmi note 4 (snapdragon) roms works
x3m.zone said:
hi. have you managed to install this?
i'm about to buy a redmi note 4x and i need to know if redmi note 4 (snapdragon) roms works
Click to expand...
Click to collapse
Yeah sure, I've got the lineage os since my last post here and it's been working fine. Network is a little bumpy but it's still unofficial so I'll take it.
Nfous said:
Yeah sure, I've got the lineage os since my last post here and it's been working fine. Network is a little bumpy but it's still unofficial so I'll take it.
Click to expand...
Click to collapse
So basically you can flash ROMs for Redmi Note 4 (Snapdragon) to any Redmi Note 4X (are the same devices?) ?
PS: Thank you for quick answer!
x3m.zone said:
So basically you can flash ROMs for Redmi Note 4 (Snapdragon) to any Redmi Note 4X (are the same devices?) ?
PS: Thank you for quick answer!
Click to expand...
Click to collapse
Yeah, basically the 4x is a redmi note 4 SD but with more bands unlocked. In fact, the global miui for the redmi note 4 SD goes without a hitch on the 4x
Nfous said:
Yeah, basically the 4x is a redmi note 4 SD but with more bands unlocked. In fact, the global miui for the redmi note 4 SD goes without a hitch on the 4x
Click to expand...
Click to collapse
Thanks sir for all the info!
Based on your info, I ordered today an Redmi Note 4X (3GB RAM/32GB Internal) for about 150€.
Can' wait to change my current Redmi Note 4 (MTK).
:good:
Hello. Infra red is working?
Thanks

New camera features

Hello,I just got my redmi note 4 mtk and was wondering if there was a way of editing some lines in system files to get tilt shift and fish eye for redmi note 4 mtk? Thanks in advance
Actually you don't need to do that, just installing some third-party camera apps, most of them have these additional features.
sirjohnrl said:
Hello,I just got my redmi note 4 mtk and was wondering if there was a way of editing some lines in system files to get tilt shift and fish eye for redmi note 4 mtk? Thanks in advance
Click to expand...
Click to collapse
Some custom ROM already have those functions. I'm on MIUIPro and they work perfectly.
SalPhobos said:
Some custom ROM already have those functions. I'm on MIUIPro and they work perfectly.
Click to expand...
Click to collapse
Can you give me a link to miuipro rom? i cant seem to find it anywhere.Is it for redmi note 4 mediatek varient?
sirjohnrl said:
Can you give me a link to miuipro rom? i cant seem to find it anywhere.Is it for redmi note 4 mediatek varient?
Click to expand...
Click to collapse
Yes, it's for mediatek varient.
It's a bit tricky to find the links 'cause it's a Russian ROM.
The official page it's: miuipro.by
This is the link of the last version they are gonna support of MIUI 8. Until our device gets MIUI 9 there would be a new version of the ROM. https://miuipro.by/obnovleniya-miuipro-7-8-24-opublikovanyi/
By the end of the page there is a picture of a orange cloud, Clic it and it will reach you to Drive. Look for the nikel version.
SalPhobos said:
Yes, it's for mediatek varient.
It's a bit tricky to find the links 'cause it's a Russian ROM.
The official page it's: miuipro.by
This is the link of the last version they are gonna support of MIUI 8. Until our device gets MIUI 9 there would be a new version of the ROM. https://miuipro.by/obnovleniya-miuipro-7-8-24-opublikovanyi/
By the end of the page there is a picture of a orange cloud, Clic it and it will reach you to Drive. Look for the nikel version.
Click to expand...
Click to collapse
Big thanks to you I only had one little "bug" (i guess) . I read you had to wipe system,data,cache and dalvik,and I had cofface twrp.I tried to wipe all of those,and data cache and dalvik did wipe but i couldnt wipe system,so I installed zcx team twrp,and I wiped all of those,installed rom,but when I booted I didnt get setup screen,I got to my old homescreen.I have all the features of the miui pro rom but it didnt wipe any of my files,my apps,or my password,saved wifis and all that ****.Weird lel
SalPhobos said:
Some custom ROM already have those functions. I'm on MIUIPro and they work perfectly.
Click to expand...
Click to collapse
Could you please send me an apk of your camera app (my rom didn't come with one so I'm surviving on a crappy one I found on xda) you can use an app like apk extractor off of Google play to get the apk.
Thanks :good:

[Question] How to enable iphone X like gestures on Redmi Note 5?

How to enable iPhone X like gestures on Redmi Note 5 which is available on 5 plus?
you need a China Dev based ROM
bhagyeshrane said:
How to enable iPhone X like gestures on Redmi Note 5 which is available on 5 plus?
Click to expand...
Click to collapse
The question should be posted in other forums of redmi note 5
Adi.s said:
The question should be posted in other forums of redmi note 5
Click to expand...
Click to collapse
i am sorry, i am new to xda so didnt know. i will delete this thread and will shift it to Q&A
Edit: I just got to know that we can't delete threads. Is that true?
bhagyeshrane said:
i am sorry, i am new to xda so didnt know. i will delete this thread and will shift it to Q&A
Edit: I just got to know that we can't delete threads. Is that true?
Click to expand...
Click to collapse
It's ok for now. Once u post it u cannot delete. From next time post in right forum. So that other viewers can actually help u. ?
bhagyeshrane said:
How to enable iPhone X like gestures on Redmi Note 5 which is available on 5 plus?
Click to expand...
Click to collapse
i also want to have it did u find any way...?
in the Chines developer rom
bhagyeshrane said:
How to enable iPhone X like gestures on Redmi Note 5 which is available on 5 plus?
Click to expand...
Click to collapse
You have this feature in miui eu rom and miglobe rom
Install this https://xiaomi.eu/community/threads/8-3-8.43553/
Abid.murain said:
i also want to have it did u find any way...?
Click to expand...
Click to collapse
An app in playstore, called "All in one gestures". This one is what I use with custom roms. Is more than iPhone's gestures
SubwayChamp said:
You have this feature in miui eu rom and miglobe rom
Click to expand...
Click to collapse
But i guess it is not available for Redmi Note 5. Niether i am able to unlock the bootloader. Getting 86006 error.
bhagyeshrane said:
But i guess it is not available for Redmi Note 5. Niether i am able to unlock the bootloader. Getting 86006 error.
Click to expand...
Click to collapse
Miglobe is available for Redmi 5 (called so in this thread) device name Rosy I don´t know if its the same but aspect and wallpaper that shows device is the same http://mi-globe.com/rom-builder-features/?codename=rosy&img=redmi5.png&realname=RedMi+5 also you can add or not some mods in your zip rom to flash it.
Really I don´t tell exactly what is the reason on this error many mentioned in almost all the forum, cause I unlock my last mi max in less than a half hour and now my Redmi 5 Plus came with bootloader unlocked from the seller, so strange method cause I´m sure that they didn´t get any code unlock but anyway.
I Read in some post that is necessary to solved this issue first install china rom with EDL method using testpoint, also anyone mentioned the normal method to enter in EDL that some devices naturally has with combination keys (a trickey method that needs many many patience) and also the other previous option to get EDL before to open back cover with a "flash deep cable" this worked for me in the past trying to put device in this special mode.
Adding to all mentioned I know that some users that flashed TWRP and custom roms with locked bootloader, read carefully this thread and if you want to try just replace all the files mentioned that have to be specific for your device http://xiaomitips.com/guide/how-to-flash-miui-fastboot-rom-on-mi-max-with-locked-bootloader/
Also you have this thread, is more easy that many users think https://forum.xda-developers.com/mi-max/how-to/installing-twrp-locked-bootloader-t3406501
There is a main idea about how to work locked bootloader and why is not possible to flash nothing unofficial on it. It is mainly caused for stock recovery, once you get change it for a custom one you can flash anything you want prevent you to encrypt your data after reboot and prevent you that stock recovery don´t overwrite again to custom recovery..

Categories

Resources