Sim card not detected - E 2015 Q&A, Help & Troubleshooting

i have a consumer cellular xt1527
iv flashed a few different surnia roms, but none detect a sim card.

arolust said:
i have a consumer cellular xt1527
iv flashed a few different surnia roms, but none detect a sim card.
Click to expand...
Click to collapse
I don't think that's been added to the ROM APN configs. If you could get me the apns-conf.xml and eri.xml from your stock ROM, I might be able to get it working for you. They are located at /system/etc/apns-conf.xml and the for eri.xml I'll need the framework-res.apk. I'd like to see the systemui.apk also.

I didnt back up my original rom (there were errors originally when trying to with twrp, so i skipped it), im trying out different stock roms now to find a working on.
EDIT:
UPDATE: 1/12/17
After trying every stock from for cc xt1527 I could find, and trying to flash modems, I finally just did my best to look down into the sim card slot, found it was missing a pin.
Problem solved, broken sim slot, wish it wasnt so hard to look in there. Next im going to pull the thing apart and try to see if I can fix it without soldering.

Related

[Q] no sim card error

Specifics of my phone are Rogers unlocked/rooted.
Was functioning perfectly fine with stock rogers rom, i tried to flash saurom, that's when it went to ****.
My phone hasn't recognized the sim card since, giving me a no sim error. I've tried flashing odin stock rogers and stock kernel, CWM the rogers modem, etc.
Nothing has fixed it thus far... ready to throw this thing against a wall
I'm able to put my sim card in another phone and it functions just fine. I've even taken a sim card from that other phone, and put it into my Note, and it worked... But my native sim card doesn't like my Note anymore?..
Anyone have any suggestions?..
can you try changing another Rogers sim card or unlock first. it's only 15$ to network/factory unlock at cellunlocket.net
it's already unlocked. i've stated that i put another card in the phone and it functions fine. and put the same card into another phone and it functions fine.. but this card gives me this blasted error.
If you go to settings >> about phone do you have a baseband or does it say unknown?
If you go to status (under about phone), do you have an unknown IMEI and unkown IMEI SV?
That's the first place to start.
Synthetickiller said:
If you go to settings >> about phone do you have a baseband or does it say unknown?
If you go to status (under about phone), do you have an unknown IMEI and unkown IMEI SV?
That's the first place to start.
Click to expand...
Click to collapse
Have proper IMEI numbers and i717ruxla2 baseband.
I found i could switch it to HSPDA+ only and I'll be able to use 4g data/voice for a few minutes.. then it lose signal :S
funkdoobi said:
Have proper IMEI numbers and i717ruxla2 baseband.
I found i could switch it to HSPDA+ only and I'll be able to use 4g data/voice for a few minutes.. then it lose signal :S
Click to expand...
Click to collapse
Sounds like a finicky modem.
Do you have the stock modem EFS or another version you could try?
Synthetickiller said:
Sounds like a finicky modem.
Do you have the stock modem EFS or another version you could try?
Click to expand...
Click to collapse
I've flashed and reflashed the rogers modem over and over again.. Not sure how it can still be a modem issue?
I went out and got a brand new ROGERS LTE cim card today to replace the one that i thought was faulty... same issue. I've tried two non-lte cards from other providers and they work perfectly fine.. yet my rogers card doesn't? :S
funkdoobi said:
I've flashed and reflashed the rogers modem over and over again.. Not sure how it can still be a modem issue?
I went out and got a brand new ROGERS LTE cim card today to replace the one that i thought was faulty... same issue. I've tried two non-lte cards from other providers and they work perfectly fine.. yet my rogers card doesn't? :S
Click to expand...
Click to collapse
I have absolutely zero experience flashing to rogers. I will tell you my experience though. Hopefully, it might give you some insight.
My i717 was flashed from AT&T to a T-mobile radio. On the stock AT&T rom, no radio would work. This included the original radio firmware I had downloaded from XDA and other places as well.
I flashing to a GB rom, Sauron in my case fixed the issue. If I flashed to ICS, I had to get an ICS compatible radio. If I flashed back to the AT&T rom, nothing works. It seems to be irreversible, despite what everyone on here says. I know I'll get flack for it, but I've tried it a few times. Maybe I have a special phone? LOL
I would say back up your EFS w/ EFS Pro (it worked for me), then try flashing to something else, even AT&T or T-mobile. I think you'd get 2G speeds at least. I'm not familiar with Rogers bands, so I don't know what radios you can flash to or what basebands are compatible. Maybe someone could chime in on that topic?
As long as you back up your EFS, if you're careful and find a working radio, you should be ok and you should be able to revert and flash away.
Does anyone out there have a working rogers radio? Help this guy out!
Thanks for the reply. As per what you've said, I've already tried a bunch of that.
I've tried flashing to both Bell and AT&T stocks. No dice. I've tried swapping the modems out as well to their. No dice.
As stated, I've even gotten a brand new sim card today. That card works perfectly fine in my backup phone (which isn't an LTE device, don't know if that matters?).
Im having this same problem..
I had a data plan on my sim card.
AT&T plan
and ever since I tried to root it...and i accediently wiped sd card
it says NO SIM CARD FOUND ever time it starts..
no sim card
Suddenly today, no sim card msg appears.
My samsung galaxy note i717 (Rogers) phone is std and never been altered.
I checked this thread and no answers appear.
Will contact rogers.
i have same problem AT&T I717
i tried different firmware like Rogers Telus and AT&T As well but problem is still there
and also i checked Hardware nothing wrong with hardware side i have same phone i replace SIM Socket but dos't work either
any Ida about this problem
Thanks
My first note I got did this also. Lucky it was 10 minutes after walking out of the store. They swapped out out for me and haven't had it happen again. Most likely, its the phone. Revert back to stock and send it in for warranty if possible.
Sent from my Samsung-SGH-I717 using xda app-developers app
I have the same problem display on screen " the mobile network will be unavailable until you restart a valib sim card inserted" repeat it every time
Sent from my Micromax A90s using xda premium

[Q] i717 Radio for Wind Mobile

I have tried every radio in this forum, must be at least 7 or 8, and none of them can get my SGNote i717 to work When i go Settings > wireless and networks > mobile networks i get a popup saying "insert SIM card to access network services" eventhough i already have a SIM from wind in there.
I am running OnlyOne rom 4.0.4, rooted.
kernel version:
3.0.8-perf-i717ucle2-cl526350
[email protected] #1
SMP preempt tue may 8 21:16:00 KST 2012
build number:
IMM76D.UCLE2
If anyone can point me to or post a working, or prefered, faster radio to use for Wind Mobile, I would really appreciate it. I've spent countless hours on XDA.
I have copied the radios to the SD card and tried flashing each one with CWM, then trying them out, but none work. If I am doing it wrong, please show me how to do it right.
Cheers :good:
Wind uses T-Mobile bands. Go get the blaze modem in the T-Mobile thread discussion.
But if you get a sim card not recognized or a no sim card inserted error, its not the modem. Check your sim in any GSM phone to see it it is damaged or not provisioned.
rangercaptain said:
Wind uses T-Mobile bands. Go get the blaze modem in the T-Mobile thread discussion.
But if you get a sim card not recognized or a no sim card inserted error, its not the modem. Check your sim in any GSM phone to see it it is damaged or not provisioned.
Click to expand...
Click to collapse
or even dirty. possible that your sim slot is damaged too.
madman604 said:
or even dirty. possible that your sim slot is damaged too.
Click to expand...
Click to collapse
Well, its a brand new phone, perfectly clean and i had it working before. at first when updated to onlyone rom, i tried many that didnt work until i found one that did. but i found the speeds were too slow, so today i decided to shop around for some others, but now that i flashed these ones, i cant get the original one working again.
are you sure its hardware and not software?
found this:
http://forum.xda-developers.com/showpost.php?p=26657065&postcount=336
quite a unique circumstance but explains a lot. i will try it now and confirm it worked on my phone
yes, the above link proved to be the correct answer. onlyone rom users for the galaxy note can only use the ripped sgs2 ICS radios
i hope this will be able to help someone else
:good:
Whew. Good job on the investigation.
same as me
hello
this happened to me and drove me crazy in the end from recovery i did all the wipe and installed the saurom rom then every thing worked agen i am new at this but i think my mastic was that i flashed ics modem over a gingerbread rom or vers versa
but after a wipe and a new rom the phone start to see the sim i wish that help because this drove me crazy good luck
Can someone post the steps to do this? I am with Mobilicity and lost network connection. Probably because of flashing roms that do not work with Mobilicity.
sazfar13 said:
Can someone post the steps to do this? I am with Mobilicity and lost network connection. Probably because of flashing roms that do not work with Mobilicity.
Click to expand...
Click to collapse
The solution to this problem is all those on the Tmobile/Wind/Mobilicity network need to flash one of these radios after they have flashed a rom of their choosing. I believe the radios that come with these roms are for the AT&T/Bell/Rogers/Telus networks
http://forum.xda-developers.com/showthread.php?t=1573568
rangercaptain said:
Wind uses T-Mobile bands. Go get the blaze modem in the T-Mobile thread discussion.
But if you get a sim card not recognized or a no sim card inserted error, its not the modem. Check your sim in any GSM phone to see it it is damaged or not provisioned.
Click to expand...
Click to collapse
No, it actually "does" have to do with the modem sometimes. I flashed several roms and, when i got the error, it was only with a certain rom and, after going back to the other rom, the problem was gone. The SIM wasn't touched hence...it was not the SIM.
immortalsoule said:
No, it actually "does" have to do with the modem sometimes. I flashed several roms and, when i got the error, it was only with a certain rom and, after going back to the other rom, the problem was gone. The SIM wasn't touched hence...it was not the SIM.
Click to expand...
Click to collapse
Flashing a rom does not flash a modem. So with all the rom changes you did, you never touched the modem.
Only a few update packages contain both a rom and a modem.
rangercaptain said:
Flashing a rom does not flash a modem. So with all the rom changes you did, you never touched the modem.
Only a few update packages contain both a rom and a modem.
Click to expand...
Click to collapse
Yes and my packages "may" have been some of those packages. Stop assuming....believe it or not you don't see everything that goes on at the other end. I also flashed other modems as well, the three made for T-Mobile, along with those roms and just didn't add it into the conversation. The Padawan ROM actually "does" carry multiple modems.
What ever, dude. Stop getting so excited. Its just information.
And its not your thread -- its a community thread.

[Q] Verizon GN2 NOT working GSM

I have a Verizon i605 that I've been using since around Christmas. I have decided to go to ATT go phone or straight talk, but I can't get the phone to accept a GSM sim card of any kind. Ive tried an H20 sim, 2 different GoPhone sims and a straight talk (att) sim. In all cases the phone will give the NON-Verizon sim error and not allow any calls. I've tried flashing different ROMs and no changes have taken place. I have also tried flashing the radio to no avail. I've searched all night in the forums and have come up empty. Seems like im the only one who cant get any response from the phone in GSM. For the record, the phone is rooted and unlocked, Ive tried GSM only and global modes, I can sometimes get the phone to show signal but get a "phone is not registered" error when trying to dial out. Replacing my Verizon sim results in full working use. Does anybody know anything else I can try? I'm working on downloading VRAMC3 to flash in Heimdall but thought I would reach out before losing my root/unlock. Any help would be greatly appreciated!
Add in the APN info and you should be good. The non verizon sim error is normal unless you remove files that make that happen.
Either flash a ROM that has the AT&T APN info like JellyBeans 21 or...
Check out one of my old posts about the AT&T APN info http://forum.xda-developers.com/showpost.php?p=42953285&postcount=4
I will try to keep an eye on this thread and help out if you need further assistance, good luck.
correct me if im wrong, but wouldnt you lose lte because of the different frequencies?
Milimbar said:
Add in the APN info and you should be good. The non verizon sim error is normal unless you remove files that make that happen.
Either flash a ROM that has the AT&T APN info like JellyBeans 21 or...
Check out one of my old posts about the AT&T APN info http://forum.xda-developers.com/showpost.php?p=42953285&postcount=4
I will try to keep an eye on this thread and help out if you need further assistance, good luck.
Click to expand...
Click to collapse
Ive tried beans 21 and cleanrom 5.0. Ive gitten some network respinse from flashing cleanrom as if it is a n7100 but that is when I get the cannot register on the network errors. It will show a signal from at&t at that point. Im currently downloading the odin file but will have to use heimdall fir the first time to flash it because im now running osx. Hopefully it will work. I dow however think that my problem may be kernel related as I cant get the phone to charge past about 50%. Ive tried flashing beans using several variants of the kernel and havent had luck there either.
Now I can't get Heimdall to recognize the PIT that I'm pulling from my own device or load the odin file I've downloaded. Should the Odin file be in zip format? How do I make it an MD5 file for heimdall?
I am in the exact same situation as you. I have a VZW Note 2 and went to AT&T on a GoPhone plan.
When I first set it up I took my phone in with JellyBeans 18 on it and the manager at the store put my sim in and activated it and set up all my APN info. Try doing that, install any ROM (full data wipe and format) that you know works 100% with AT&T (including kernel) and just have them set it up for you. if it then don't work, you might be looking at a hardware problem with your GSM radio maybe?
All is good. Apparently the sim I was trying to use had a data block on it and the GN2 WILL NOT work with a phone with a data block. I borrowed a friends ST sim and it worked fine. I stressed an entire day over this. Thanks to those who helped. If anybody knows though, I took no OTA update EVER on this phone, can I ODIN (Heimdall) back to VRALJ with no problems? It's the only tar.md5 file i can seem to locate.
mptrh336 said:
All is good. Apparently the sim I was trying to use had a data block on it and the GN2 WILL NOT work with a phone with a data block. I borrowed a friends ST sim and it worked fine. I stressed an entire day over this. Thanks to those who helped. If anybody knows though, I took no OTA update EVER on this phone, can I ODIN (Heimdall) back to VRALJ with no problems? It's the only tar.md5 file i can seem to locate.
Click to expand...
Click to collapse
Remember to check the stickies. Droidstyle's guide has all the files you need for odin.
http://forum.xda-developers.com/showthread.php?p=34891181
Sent From My Sticky Note, Too?

Full signal but cannot make calls

Hi, i have about 1 month trying to get work a LS990 that i bought in ebay to sim unlocked and use it outside the US, i have followed every possible guide in this forum and still cannot make it work.
I am using the file replacement method with the modified files, and it works, the sim card is recognized and if i go to the network info appears the carrier network info. I get full signal but when i try to make a call, it ends immediately and appears the message "call ended".
I have tried over and over again, setting the RAT mode to automatic and Network mode to automatic, tried with ZVA,ZV8 and ZV4, same result, tried with different sim cards of different carriers also.
The bands are compatible with the carriers where i live, since i have acknowledgement of other people with this model working ok, what i am missing here?
Thanks in advance.
Just flash one of the GSM roms like Killaprime's. I recommend V4.7 as V5 and V6 have major problems/Ui glitches. And 4.7 is the closest to stock LG software
Those file replace methods never work
Edit: http://forum.xda-developers.com/devdb/project/?id=10304#downloads
Porcupineomg said:
Just flash one of the GSM roms like Killaprime's. I recommend V4.7 as V5 and V6 have major problems/Ui glitches. And 4.7 is the closest to stock LG software
Those file replace methods never work
Edit: http://forum.xda-developers.com/devdb/project/?id=10304#downloads
Click to expand...
Click to collapse
Just flash it and pop in the sim card? I already tried the version 6.0 and it didn't work. Any other steps required to get it work?
andr_oid said:
Just flash it and pop in the sim card? I already tried the version 6.0 and it didn't work. Any other steps required to get it work?
Click to expand...
Click to collapse
Try V4.7, and yes just clean flash it and you're good to go
Porcupineomg said:
Try V4.7, and yes just clean flash it and you're good to go
Click to expand...
Click to collapse
Ok, i just flash the rom, same result, i got signal but cannot make or receive calls, when a try make a call after 1 or 2 seconds it ends automatically, one thing i notice is that now when i try to change the network mode to any of the GSM bands, it changes successfully, with other stock or customized roms it always fail.
Let me know if i am wrong, i notice that the IMEI number seems to not be a "normal" IMEI. Can that be what the problem is?
I just fix it, indeed the problem was that rare IMEI, luckily i had a full backup before the very first rom flash including the EFS folder, everything is working ok now.

help..mobile data is disabled

i flashed msm extended and now no matter what phone cant read sim card? all options in settings are greyed out. ive taken out sim card and put back in and not working..ive flashed original stock roms and still nothing. anyone have any idea how i can fix this. tia
bushninja07 said:
i flashed msm extended and now no matter what phone cant read sim card? all options in settings are greyed out. ive taken out sim card and put back in and not working..ive flashed original stock roms and still nothing. anyone have any idea how i can fix this. tia
Click to expand...
Click to collapse
Hey,
Are you certain that you flashed International // EU version firmware with MSM? I'm pretty sure if you're EU, and flashed International, there might be issues with Data providers
i flashed the global version this phone originally was the 1910 Chinese version. would it not have something to do with the efs partition or modemst? ive had a similar issue before on a different phone model it was easy to fix but i just dont know what to do with this one.
if anybody could maybe spare there modem.img files or anything regarding the telephony state that would be so amazing. i think its the modem or the emmc file im not to sure but i need my cell radio services up and running
I have the T-Mobile version and have this issue when I flash any custom rom other than the original Omni rom build. If anyone know how to correct this I would like to know as well
So I had two stock roms both different versions which I always fell back on incase something happened. I've never encountered this issue on this device before so I flashed them and nothing worked and I was looking in this complicated way thinking I'd damaged the EFS partition or the modemst files. After hours I just downloaded another* I think EU stock version and did a flash all.bat and hey presto
Always revert back to original stock ROM

Categories

Resources