I have redesigned splash screen for Exynos Note 4! I tested on ONLY my N910C...
Special thanks to @willysusilo for permission and @amtra for his flashable zip file
I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE!
INFO:
1. Flash with your own risk and flash only for listed devices above (Dont flash on Snapdragon devices)
2. I have tested the zips on my Galaxy Note 4 Exynos (SM-N910C(Q) before posting them to this thread
3. If you want to take these designs please credit me and PM me
How to use:
1. Boot to recovery (tested on twrp)
2. Select the zip (attachment bellow)
3. Flash and reboot
4. BOOM!
5. If phone not boot please flash bootloader with odin. Everything will come back
DOWNLOAD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LOOK AT THE ATTACHMENTS
HIT THANKS BUTTON
reserved
Soft bricked??
Flashed Note7 White Bootlogo to my N910H with DN7 0.1 ROM, now i can't boot or enter recovery mode... All i can is enter download mode although i already tried to flash official firmware (DPL5) but it seems still not working. Any suggestion?
Muslim You?
---------- Post added at 11:44 PM ---------- Previous post was at 11:42 PM ----------
Dostum Sen Türksün?
KnG-Iking said:
Flashed Note7 White Bootlogo to my N910H with DN7 0.1 ROM, now i can't boot or enter recovery mode... All i can is enter download mode although i already tried to flash official firmware (DPL5) but it seems still not working. Any suggestion?
Click to expand...
Click to collapse
I did not test other variants and i use dn7 hybrid...
i will prepare video for the splash screens soon
bysalihidriscan said:
Muslim You?
---------- Post added at 11:44 PM ---------- Previous post was at 11:42 PM ----------
Dostum Sen Türksün?
Click to expand...
Click to collapse
Yes sure
My phone's not booting up after flashing the note7 white splash screen. It only shows black screen i can't even enter recovery mode. My phone is n910c. Btw my phone's able to charge and the downoad mode is also accessible. Only it is not booting up. Help please!
meowzkii said:
My phone's not booting up after flashing the note7 white splash screen. It only shows black screen i can't even enter recovery mode. My phone is n910c. Btw my phone's able to charge and the downoad mode is also accessible. Only it is not booting up. Help please!
Click to expand...
Click to collapse
This is what happened to me also but finally i've managed to get my device back on, you can try the emergency software recovery and initialization from smart switch from your pc/laptop (i've tried to flash official firmwares with odin but got no luck)... all you need is a good internet connection and write down your device S/N where you can find this on the back of your phone (beneath the battery).
PS: You will lose all of your data and apps on your internal phone memory
KnG-Iking said:
This is what happened to me also but finally i've managed to get my device back on, you can try the emergency software recovery and initialization from smart switch from your pc/laptop (i've tried to flash official firmwares with odin but got no luck)... all you need is a good internet connection and write down your device S/N where you can find this on the back of your phone (beneath the battery).
PS: You will lose all of your data and apps on your internal phone memory
Click to expand...
Click to collapse
May I ask you to help me please with the process?
meowzkii said:
May I ask you to help me please with the process?
Click to expand...
Click to collapse
1. Download and install SmartSwitch from Samsung web
2. Run SmartSwitch from your PC/Laptop
3. On the upper right corner of SmartSwitch you'll find "More" option and click that
4. Choose "Emergency software recovery and initialization" and it will open a new window
5. Click on "Device Initialization" tab
6. Enter your phone Model name... which i pressume SM-N910C and then click "Search"
7. Now enter your device S/N and then click "OK"
8. A new dialog box will show up, click "OK"
9. Another dialog box which will say about initialized version... click "OK"
10. Yes, another dialog box which say that software update and initialization for galaxy note 4 will now start, the "OK" button is greyed out so you can't click it just yet.
11. Put your device to Download Mode
12. Connect your device to your PC/Laptop
13. The "OK" button will turn blue then click it and follow the rest of the procedures.
14. Once it finished, your device will reboot.
All this process will take time depend on your internet connection, good luck...
Works good. Tested on n910c/h using erobot rom v17.1
Thanks for your creativity however I've created my own splash screen based on your script, hope im not violating anything because all your rights reserved. Good Job
meowzkii said:
My phone's not booting up after flashing the note7 white splash screen. It only shows black screen i can't even enter recovery mode. My phone is n910c. Btw my phone's able to charge and the downoad mode is also accessible. Only it is not booting up. Help please!
Click to expand...
Click to collapse
dont flash rom or with odin try other splash screen zips for now to make the phone boot
KnG-Iking said:
This is what happened to me also but finally i've managed to get my device back on, you can try the emergency software recovery and initialization from smart switch from your pc/laptop (i've tried to flash official firmwares with odin but got no luck)... all you need is a good internet connection and write down your device S/N where you can find this on the back of your phone (beneath the battery).
PS: You will lose all of your data and apps on your internal phone memory
Click to expand...
Click to collapse
hapiss said:
dont flash rom or with odin try other splash screen zips for now to make the phone boot
Click to expand...
Click to collapse
I'm not able to flash any cause i cant even enter recovry mode
meowzkii said:
I'm not able to flash any cause i cant even enter recovry mode
Click to expand...
Click to collapse
flash twrp with odin and dont flash other rom and then flash my splash screen hapiss.black.zip
@hapiss Dostum Uzun Süredir Şarj Olma Efekti Üzerinde Çalışıyorum Bana Yardımcıki Olabilirmisin?
bysalihidriscan said:
@hapiss Dostum Uzun Süredir Şarj Olma Efekti Üzerinde Çalışıyorum Bana Yardımcıki Olabilirmisin?
Click to expand...
Click to collapse
Please post in English. XDA is an English speaking forum only
Sent from my Mi Max using Tapatalk
sawdoctor said:
Please post in English. XDA is an English speaking forum only
Sent from my Mi Max using Tapatalk
Click to expand...
Click to collapse
I understand Mate Im Sorry ThankYou
KnG-Iking said:
1. Download and install SmartSwitch from Samsung web
2. Run SmartSwitch from your PC/Laptop
3. On the upper right corner of SmartSwitch you'll find "More" option and click that
4. Choose "Emergency software recovery and initialization" and it will open a new window
5. Click on "Device Initialization" tab
6. Enter your phone Model name... which i pressume SM-N910C and then click "Search"
7. Now enter your device S/N and then click "OK"
8. A new dialog box will show up, click "OK"
9. Another dialog box which will say about initialized version... click "OK"
10. Yes, another dialog box which say that software update and initialization for galaxy note 4 will now start, the "OK" button is greyed out so you can't click it just yet.
11. Put your device to Download Mode
12. Connect your device to your PC/Laptop
13. The "OK" button will turn blue then click it and follow the rest of the procedures.
14. Once it finished, your device will reboot.
All this process will take time depend on your internet connection, good luck...
Click to expand...
Click to collapse
Thanks for the help. My phone's alive again. Thank you and god bless!
meowzkii said:
Thanks for the help. My phone's alive again. Thank you and god bless!
Click to expand...
Click to collapse
You're welcome mate...
My 910C running DN7 soft bricked too using the white note 7 zip. The white note 4 zip worked fine. Thanks to KnG-Iking for recovery method. As previously mentioned by others the phone after SB only goes to download mode but you cannot Odin anything. A computer will be required to fix/restore boot. So be careful because even with a backup you will have a lengthy restore process. To the Op, I had exposed installed if that helps troubleshooting the zip.
Related
i have this phone with non working home button
i am new here in this forum...and its my first time to have galaxy s2 before i have iphone...so..
i need help...i want to restore my phone to stock firmware?any tutorial?
i want to delete everything and i install at the beggning...
and home button is not working!
DMXSTORM said:
i have this phone with non working home button
i am new here in this forum...and its my first time to have galaxy s2 before i have iphone...so..
i need help...i want to restore my phone to stock firmware?any tutorial?
Click to expand...
Click to collapse
all the things that you would want to know is in this sticky:
http://forum.xda-developers.com/showthread.php?t=1648351
DMXSTORM said:
i want to delete everything and i install at the beggning...
Click to expand...
Click to collapse
after you read and understand how to flash firmware using odin, and fully aware of what could go wrong, from the guides in the sticky topic i posted above
you will find unbranded stock firmwares in here:
http://forum.xda-developers.com/showthread.php?t=1544487
DMXSTORM said:
and home button is not working!
Click to expand...
Click to collapse
well, i would suggest ebay for a replacement if you are confident enough replacing it yourself, or send it for repair at a local repair shop
thanks for your answer.
my problem is my HOME button not working.
i can install firmware without home?
DMXSTORM said:
thanks for your answer.
my problem is my HOME button not working.
i can install firmware without home?
Click to expand...
Click to collapse
yes, if you have CWM installed:
open cwm manager > under reboot choose Download mode > use odin to flash official firmware
If you are rooted you can use button savior on the play store https://play.google.com/store/apps/details?id=com.smart.swkey
It will give you a virtual home button
Sent from my Galaxy Nexus using xda premium
i am not ROYTED.
were can i find CWM ?adroid market?
DMXSTORM said:
i am not ROYTED.
were can i find CWM ?adroid market?
Click to expand...
Click to collapse
You don't need ROOT for Button Savior if you need only the home button, power off ...[other options may need the root]
DMXSTORM said:
i am not ROYTED.
were can i find CWM ?adroid market?
Click to expand...
Click to collapse
DMXSTORM said:
i want to restore my phone to stock firmware?
Click to expand...
Click to collapse
i was under the impression that you are not on stock?
if the home button is not working physically, i would either replace it or take collingall's advice
if you still want to flash official firmware, the third option will be a "usb jig"
---------------------------------------------------------
edit:
supermult said:
Hi,
I also have a phone with a dead home button and i learned my way to handle it.
Try plugging in usb and holding volume down at the same time.
I don´t know why but this always got me into download mode.
Click to expand...
Click to collapse
i have version 4.0.4 original but i want to install fresh because lot of programs install and my device is very slow now.
sorry but i am NEW here who is collingall's??
YES i want to install official firmware(but without HOME BUTTON)???!!??
How to use usb jig??you need ROOT?
JUST now i try to restart my phone and i press volume down and something happent...
''Warning!!
its say something to restore to custom firmaware!
can i install the official firmware like this?or ''maybe LATER 'i must USE home?
Buy a USB jig. Its a dongle which, when plugged into the phone, forces your phone into download mode. From there you can flash any official firmware (via Odin) for your model. You don't need root permissions for it.
Sent from my GT-I9100 using Tapatalk 2
i try supermult method for download mode and works!!
i connect my device with mini usb to pc and i press volume down and restart phone and....DOWNLOAD MODE SAYS...
Warning !!
A custom OS can cause critical
problems on phone and instaled
applications.
if you want to download a custom
OS,press the volume up key.
Otherwise,press the volume down
key to cancel.
Volume up : Continue
Volume down : Cancel (restart phone)
its this the DOWNLOAD MODE??TELL ME PLEASE...??!??
can i use odin now?
Press Volume Up and you will be in Download Mode.
Yes, press volume up and you'll be in the download mode. Connect your phone to your PC, start Odin and flash away.
Sent from my GT-I9100 using Tapatalk 2
i need the official firmware s2(greece)and odin for download....
send me the link where to download....!!
DMXSTORM said:
i need the official firmware s2(greece)and odin for download....
send me the link where to download....!!
Click to expand...
Click to collapse
GT-I9100 - Greece 4.0.3 2012-04-10
GT-I9100 - Greece (Vodafone) 4.0.3 2012-06-11
GT-I9100 - Greece (Cosmote) 4.0.4 2012-08-31
Odin3-v1.85.zip
THANKS ALL FOR YOUR HELP
i use idin and official firmware but the phone not delete nothing!!why?i have all the programs again and the pictures...
i need fresh firmware install...not from buckup....
guides for odin
DMXSTORM said:
THANKS ALL FOR YOUR HELP
i use idin and official firmware but the phone not delete nothing!!why?i have all the programs again and the pictures...
i need fresh firmware install...not from buckup....
Click to expand...
Click to collapse
willk22 said:
OdinOdin is a piece of software that allows us to flash anything we want to the phone. The file is attached to the bottom of this post.
It is perfectly safe IF USED CORRECTLY!
This is a general guide for using Odin, take a look at this picture (thanks to screamworks):
To get Odin to connect to your phone, you need to boot into 'download mode' by pressing volume down, home, and power keys at the same time, and connect your phone to your PC via USB.
Everything in red:
NEVER TOUCH
NEVER TOUCH
NEVER TOUCH
NEVER TOUCH
Click to expand...
Click to collapse
Intratech said:
1. Just download the firmware version you want
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. Click on the PDA button and browse to the .tar or .tar.md5 file that you extracted in step 1
If the package has more than one .tar archive then they will be labelled with PDA, Phone/Modem and CSC. Just put them in the corresponding section of Odin
5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Anyone ask about .pit file is a moron
Should look like this screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If the package has 3 files it should look like this:
Regardless of firmware version it's still the same methodology
6. Connect the USB cable and wait for the ID:COM section to turn yellow
7. Click start to flash
8. Do not disconnect the cable or turn off the device, it will reboot when it finishes.
It will not wipe your phone if you flash as recommended
Click to expand...
Click to collapse
help i try this and mobtle says=
firmwar upgrade encountered
an issue.Please select
recovery mode in kies k try again.
DMXSTORM said:
help i try this and mobtle says=
firmwar upgrade encountered
an issue.Please select
recovery mode in kies k try again.
Click to expand...
Click to collapse
do you have Kies installed?
please provide all the steps you took with all the details
i fix it no problem.
i dont now how to make a fresh restore??!!??
i want to install fresh firmware with no programs i have allready install....
and no my settings and my personalization...
can i delete everything?just a new s2?
Hi, I'm hoping someone here can help me.
I got a TF201 recently and it was rooted so I decided to try and flash it back to factory setting, I went into recovery mode and found there was a backup on there from when it was first made so I restored it to that.
I then clicked the button to reset the system and it gets to the Asus logo but doesn't go any further.
I tried booting into recovery again (power and vol down key) and all I get to is a menu that says "wipe data" or "fastboot USB download protocol", but no matter what I do I can't get past that screen!
Have I properly bricked it? or is there some way I can save this?
Joey#2 said:
Hi, I'm hoping someone here can help me.
I got a TF201 recently and it was rooted so I decided to try and flash it back to factory setting, I went into recovery mode and found there was a backup on there from when it was first made so I restored it to that.
I then clicked the button to reset the system and it gets to the Asus logo but doesn't go any further.
I tried booting into recovery again (power and vol down key) and all I get to is a menu that says "wipe data" or "fastboot USB download protocol", but no matter what I do I can't get past that screen!
Have I properly bricked it? or is there some way I can save this?
Click to expand...
Click to collapse
I will try to help you later but for now can you please tell me where the "NVIDIA" logo is when you switch it on bottom center or bottom right?
flumpster said:
I will try to help you later but for now can you please tell me where the "NVIDIA" logo is when you switch it on bottom center or bottom right?
Click to expand...
Click to collapse
its bottom center
Joey#2 said:
its bottom center
Click to expand...
Click to collapse
You are still on ICS bootloader.
I would advise you doing the nvflash process before leaving ICS because with them files backed up you can never hard brick your prime.
http://androidroot.mobi/t3_nvflash/
What rom do you want to install on there?
Here is a quote from another post I made.
Ok, you are on the ICS bootloader at the moment. The first thing we are going to do is flash a version of TWRP recovery on there which will allow you to install a rom off the external SD.
Power off the prime and put yourself into fastboot mode by holding power button and volume down the same time until a few icons appear on the screen. At this point press volume down to go over to the usb icon and then press volume up. It will look like the prime has frozen. Plug the prime into pc and make sure you have the drivers installed. If you do not please install them from here. http://forum.xda-developers.com/showthread.php?t=1426502
Next follow this post to flash ICS twrp http://forum.xda-developers.com/showpost.php?p=34477681&postcount=5705
Only use the file in that link to install it while on ICS bootloader. Later on you are going to flash hairybean 1.3 which will take you up to Jellybean Bootloader. If you use this file after that you will brick your tablet.
Click to expand...
Click to collapse
flumpster said:
You are still on ICS bootloader.
I would advise you doing the nvflash process before leaving ICS because with them files backed up you can never hard brick your prime.
http://androidroot.mobi/t3_nvflash/
What rom do you want to install on there?
Here is a quote from another post I made.
Click to expand...
Click to collapse
Right I'm confused by this bit here:
Plug the prime into pc and make sure you have the drivers installed. If you do not please install them from here. http://forum.xda-developers.com/show....php?t=1426502
Next follow this post to flash ICS twrp http://forum.xda-developers.com/show...postcount=5705
I have done everything upto there and I downloaded the drivers from that link but I don't know how to install them? do you mean install them onto my PC or onto the tablet? because my tablet doesn't appear in Windows when I plug it in.
Joey#2 said:
Right I'm confused by this bit here:
Plug the prime into pc and make sure you have the drivers installed. If you do not please install them from here. http://forum.xda-developers.com/show....php?t=1426502
Next follow this post to flash ICS twrp http://forum.xda-developers.com/show...postcount=5705
I have done everything upto there and I downloaded the drivers from that link but I don't know how to install them? do you mean install them onto my PC or onto the tablet? because my tablet doesn't appear in Windows when I plug it in.
Click to expand...
Click to collapse
When you go to the bootloader where the icons are and you plug the prime into PC it should show up in device manager. If the drivers are not installed it will show unknown device in device manager. If they are installed they will be up the top somewhere under asus or android devices saying something like asus bootloader interface.
flumpster said:
When you go to the bootloader where the icons are and you plug the prime into PC it should show up in device manager. If the drivers are not installed it will show unknown device in device manager. If they are installed they will be up the top somewhere under asus or android devices saying something like asus bootloader interface.
Click to expand...
Click to collapse
right I've done that now and also I've run that Zip file you said to use "ICS TWRP Updater.zip" it came up saying it was successful and then I rebooted my device and went into fastboot USB again and its sitting on the same screen.. now what?
Btw apologies I'm a beginner when it comes to this sort of stuff
Joey#2 said:
right I've done that now and also I've run that Zip file you said to use "ICS TWRP Updater.zip" it came up saying it was successful and then I rebooted my device and went into fastboot USB again and its sitting on the same screen.. now what?
Btw apologies I'm a beginner when it comes to this sort of stuff
Click to expand...
Click to collapse
Well that should have now given you a recover option as the first icon when in bootloader. Are you not getting that ?
flumpster said:
Well that should have now given you a recover option as the first icon when in bootloader. Are you not getting that ?
Click to expand...
Click to collapse
Nope its just sat on the same screen as before where I can select wipe data or fastboot USB
Oh wait.. You are on ICS.. It's been so long.
I think the way to get into recovery on that is to hold the power down and volume down button to turn it on and then press volume up when the message appears. I don't think you had the recovery icon on ICS.
flumpster said:
Oh wait.. You are on ICS.. It's been so long.
I think the way to get into recovery on that is to hold the power down and volume down button to turn it on and then press volume up when the message appears. I don't think you had the recovery icon on ICS.
Click to expand...
Click to collapse
That doesn't work either I just get to the same screen as before, I can seem to get into the boot menu at all just the wipe data and usb fastboot menu
Joey#2 said:
That doesn't work either I just get to the same screen as before, I can seem to get into the boot menu at all just the wipe data and usb fastboot menu
Click to expand...
Click to collapse
Well I have some blob files here that should take you to either the 4.1.1 bootloader and a custom recovery or the 4.2.1 bootloader and a custom recovery but when you upgrade to them you will lose the ability to ever make your nvflash backups.
It all depends what rom you want to go to and if you want to go this route.
flumpster said:
Well I have some blob files here that should take you to either the 4.1.1 bootloader and a custom recovery or the 4.2.1 bootloader and a custom recovery but when you upgrade to them you will lose the ability to ever make your nvflash backups.
It all depends what rom you want to go to and if you want to go this route.
Click to expand...
Click to collapse
If you could somehow manage to get my tablet back up and working with 4.1.1 on it you sir would be a hero and a legend in my eyes, I'm happy to go this route if it somehow works.
Joey#2 said:
If you could somehow manage to get my tablet back up and working with 4.1.1 on it you sir would be a hero and a legend in my eyes, I'm happy to go this route if it somehow works.
Click to expand...
Click to collapse
I am going to give the script a quick test on my machine first so that I know it works this end.
I have not really seen your problem before so cannot guarantee this will fix you but it's worth a go if you are up for it.
flumpster said:
I am going to give the script a quick test on my machine first so that I know it works this end.
I have not really seen your problem before so cannot guarantee this will fix you but it's worth a go if you are up for it.
Click to expand...
Click to collapse
Yeah definitely it's not working at all ATM so ill try anything
Joey#2 said:
Yeah definitely it's not working at all ATM so ill try anything
Click to expand...
Click to collapse
Here we go.
Make a folder on a drive like d:/fix and place the following zip in it (not on desktop).
Extract it there and run the Attempt_Fix.bat file.
http://flumpster.lolcakes.com/android/Fix%20for%20ICS%20Guy.zip
Follow the onscreen instructions to get into fastboot mode. When it gets to the writing 'staging' part that is where is should pause for about 5 minutes and a blue line should fill on the screen. Do not turn it off at this point.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If everything completes correctly and the blue line filled all the way then when you continue at the end it should restart and stick on the Asus screen.
Hold down volume down and power button for 10 seconds and keep holding and see if the icons reappear.
flumpster said:
Here we go.
Make a folder on a drive like d:/fix and place the following zip in it (not on desktop).
Extract it there and run the Attempt_Fix.bat file.
http://flumpster.lolcakes.com/android/Fix%20for%20ICS%20Guy.zip
Follow the onscreen instructions to get into fastboot mode. When it gets to the writing 'staging' part that is where is should pause for about 5 minutes and a blue line should fill on the screen. Do not turn it off at this point.
If everything completes correctly and the blue line filled all the way then when you continue at the end it should restart and stick on the Asus screen.
Hold down volume down and power button for 10 seconds and keep holding and see if the icons reappear.
Click to expand...
Click to collapse
right we might be getting somewhere now i now have RCK and android on this screen, now what?
Joey#2 said:
right we might be getting somewhere now i now have RCK and android on this screen, now what?
Click to expand...
Click to collapse
click up on RCK.. you now have recovery.
Now you have to pick a rom and put it on microsd.
flumpster said:
click up on RCK.. you now have recovery.
Now you have to pick a rom and put it on microsd.
Click to expand...
Click to collapse
I suspected you would say that, I selected RCK and its sat on that same screen saying "booting recovery kernel image.. I have a feeling its not meant to do that
Joey#2 said:
I suspected you would say that, I selected RCK and its sat on that same screen saying "booting recovery kernel image.. I have a feeling its not meant to do that
Click to expand...
Click to collapse
No it isn't.
When you switch the prime on now where is the NVIDIA logo this time. If it is bottom right it has definitely updated the bootloader.
I cant flash stock rom
I can ONLY go to download mode, there is no recovery.
When I try to boot normally I get this screen
I read all threads before i start a new one but no luck
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
===================================================================================================
I Tried to go to CWM Recovery to format the system and try to flash the stock firmware again. but no way
So I Tried to ROOT My "GT-I9300" AGAIN to get CWM Recovery
______Let us begin______
1. Download the TAR CWM recovery file , ODIN zip file and unzip the files , SuperSU zip file
http://www.mediafire.com/download/5fc53nyacjxubi9/Root_Galaxy_S3_on_Android_4.3_4.4.2__
2. Power off Galaxy S3. Then hold down Volume down, Center Home, and Power buttons together until you see a warning screen. Let go of all buttons.
3. Hit Volume Up to enter ODIN Download mode then connect a USB cable from your S3 to your computer.
4. Double-click on “odin3v1.85.exe” to start ODIN program.
5. You should see a yellow-highlighted box with a random COM number. Once you see the yellow-highlighted box you are ready to go, hit the “PDA” button.
6. Find the TAR CWM recovery file you downloaded earlier in Step 1 and choose it.
7. Hit “Start” and it should take about 5 seconds for ODIN program to flash CWM Recovery to your Galaxy S3 and you will see “PASS!” when it’s done. Your phone should reboot.
8. Once your phone has rebooted hold down Volume Up, Center Home, and Power button together.When you see the Samsung logo, let go of Power button but keep holding down Volume Up and Center Home buttons.
9. You should now be in CWM Recovery.
10. Make this step:
-wipe data,cache,dalvik
-format system, preload, internal sd
11. Repeat the steps 2,3,4,5
Once you see the yellow-highlighted box you are ready to go, hit the “PDA” button and Find the Stock firmware and choose it and Hit “Start” you will see “PASS!” when it’s done. Your phone should
reboot.
--------------------------
*******DONE*******
--------------------------
==================================
Root Galaxy S3 on Android 4.3_4.4.2 [NEW]
All credits go to @zedomax
http://galaxys3root.com/galaxy-s3-root/how-to-root-galaxy-s3-on-android-4-34-4-2-new/
==================================
Flash firmware with Odin, read the sticky guide in general forum
boomboomer said:
Flash firmware with Odin, read the sticky guide in general forum
Click to expand...
Click to collapse
thanx man for reply
This is not the first time I Flash firmware with Odin. but this time simply I cant do it again
You don't give any information on why not.
I had the same problem but after trying a few times it worked
boomboomer said:
You don't give any information on why not.
Click to expand...
Click to collapse
I’ll explain Why No !!!!!!!!!!!
every time i try to flash the stock firmware with Odin. the program start to flash as usual BUT before end of the process the program say FAILD and I get that screen.
then try to remove the battery and put it back and try to flash over and over again but no chance.
I can’t even go to the recovery
medostar00 said:
I’ll explain Why No !!!!!!!!!!!
every time i try to flash the stock firmware with Odin. the program start to flash as usual BUT before end of the process the program say FAILD and I get that screen.
then try to remove the battery and put it back and try to flash over and over again but no chance.
I can’t even go to the recovery
Click to expand...
Click to collapse
Whats the link to the stock rom your trying to flash?
Darke5tShad0w said:
Whats the link to the stock rom your trying to flash?
Click to expand...
Click to collapse
Thanx 4 your concern
the problem not in the firmware because I flash the same firmware on other cell phone and every thing DONE like a charm
medostar00 said:
Thanx 4 your concern
the problem not in the firmware because I flash the same firmware on other cell phone and every thing DONE like a charm
Click to expand...
Click to collapse
Where they all i9300?
Darke5tShad0w said:
Where they all i9300?
Click to expand...
Click to collapse
YES they are
Sounds like your motherboard is toasted.
boomboomer said:
Sounds like your motherboard is toasted.
Click to expand...
Click to collapse
I DON’T THINK SO
I’ll find a solution soon
medostar00 said:
I DON’T THINK SO
I’ll find a solution soon
Click to expand...
Click to collapse
Can i ask why you have come here for support when you disagree with all the help that has been given?
You have given us little to no information like odin logs, process you have taken or file names etc when requested besides a worthless picture that hasnt been seen on the i9300 before.
I agree with boomboomer, you could try the rescue firmware it maybe you last hope you can find it in the stickies.
Darke5tShad0w said:
Can i ask why you have come here for support when you disagree with all the help that has been given?
You have given us little to no information like odin logs, process you have taken or file names etc when requested besides a worthless picture that hasnt been seen on the i9300 before.
I agree with boomboomer, you could try the rescue firmware it maybe you last hope you can find it in the stickies.
Click to expand...
Click to collapse
First of all ... I want to thank everyone write a single word in this thread for help
second .. I don’t disagree with any help but when somebody tell you that your motherboard is toasted. tell me what you can do about that ??
medostar00 said:
I cant flash stock rom
I can ONLY go to download mode, there is no recovery.
When I try to boot normally I get this screen
I read all threads before i start a new one but no luck
=====================================================================================================
I Tried to go to CWM Recovery to format the system and try to flash the stock firmware again. but no
way
So I Tried to ROOT My "GT-I9300" AGAIN to get CWM Recovery
______Let us begin______
1. Download the TAR CWM recovery file , ODIN zip file and unzip the files , SuperSU zip file
http://www.mediafire.com/download/5fc53nyacjxubi9/Root_Galaxy_S3_on_Android_4.3_4.4.2__
2. Power off Galaxy S3. Then hold down Volume down, Center Home, and Power buttons together until you see a warning screen. Let go of all buttons.
3. Hit Volume Up to enter ODIN Download mode then connect a USB cable from your S3 to your computer.
4. Double-click on “odin3v1.85.exe” to start ODIN program.
5. You should see a yellow-highlighted box with a random COM number. Once you see the yellow-highlighted box you are ready to go, hit the “PDA” button.
6. Find the TAR CWM recovery file you downloaded earlier in Step 1 and choose it.
7. Hit “Start” and it should take about 5 seconds for ODIN program to flash CWM Recovery to your Galaxy S3 and you will see “PASS!” when it’s done. Your phone should reboot.
8. Once your phone has rebooted hold down Volume Up, Center Home, and Power button together.When you see the Samsung logo, let go of Power button but keep holding down Volume Up and Center Home buttons.
9. You should now be in CWM Recovery.
10. Make this step:
-wipe data,cache,dalvik
-format system, preload, internal sd
11. Repeat the steps 2,3,4,5
Once you see the yellow-highlighted box you are ready to go, hit the “PDA” button and Find the Stock firmware and choose it and Hit “Start” you will see “PASS!” when it’s done. Your phone should
reboot.
--------------------------
*******DONE*******
--------------------------
==================================
Root Galaxy S3 on Android 4.3_4.4.2 [NEW]
All credits go to @zedomax
http://galaxys3root.com/galaxy-s3-root/how-to-root-galaxy-s3-on-android-4-34-4-2-new/
==================================
Click to expand...
Click to collapse
Finally I Get My Precious "SG3_GT-I9300" BACK :laugh::good:
Hey guys, I think I just bricked my Honor.
My device is unlocked and has TWRP. After I rooted I received the update to B151, I downloaded it, the phone rebooted to TWRP, installed the update by itself and now it doesn't boot . It's stucked at the first Honor screen, I can shut it down but after that the phone boots up after 10secs. When I keep pressed any key the phone doesn't boot, but when I release them I tries to boot, being stucked at the Honor screen.
I tried putting it to charge, connecting it to the PC and rebooting to recovery via adb (I couldn't) and no signal of life. Is this a bootloop? A complete brick? Any ideas? Thanks for the help
it's normal
you can not install official updates with TWRP
install recovery stock for fastboot, do factory reset, if not boot
re-install the whole firmware b130 from DLOAD....
not working
necwssary to unlock frp navigate to setiings
I heve bootlop to twrp
Darkanimus said:
Hey guys, I think I just bricked my Honor.
My device is unlocked and has TWRP. After I rooted I received the update to B151, I downloaded it, the phone rebooted to TWRP, installed the update by itself and now it doesn't boot . It's stucked at the first Honor screen, I can shut it down but after that the phone boots up after 10secs. When I keep pressed any key the phone doesn't boot, but when I release them I tries to boot, being stucked at the Honor screen.
I tried putting it to charge, connecting it to the PC and rebooting to recovery via adb (I couldn't) and no signal of life. Is this a bootloop? A complete brick? Any ideas? Thanks for the help
Click to expand...
Click to collapse
Hello
first thing don't panic. If you can get in TWRP it's easy to fix
hold volup+voldown+power to get back to TWRP
hook the phone to your PC and copy this stock recovery to your sdcard
Now in TWRP choose Install / Image choose the recovery.img the tick the recovery box / then swipe to flash. You now have stock recovery.
now download the update.zip here > https://www.androidfilehost.com/?fid=24499762636004244
and copy that file to a folder on your ext_sdcard called dload once its copied in TWRP choose
Reboot / Recovery. the update should flash upon entering recovery.
If it doesn't hold the volup+voldown+power again and let it reboot now it should flash and your phone will be fixed and updated to b151
---------- Post added at 07:07 AM ---------- Previous post was at 07:02 AM ----------
Robix74 said:
not working
necwssary to unlock frp navigate to setiings
I heve bootlop to twrp
Click to expand...
Click to collapse
who are you ? do you have the same phone and the same problem as the original poster ?
Do you have a KIW-L24 that took an update to B151 with TWRP ?
no i have l21 with twrp root and made ota update to 140
Robix74 said:
no i have l21 dan twrp root and made ota update to 140
Click to expand...
Click to collapse
the files you need are all posted in The File Depot
use the same steps I posted above with the correct files for your phone L21
volup+voldown+power not working . I put stock recovery from twrp reboot and now a cant go to stock recovery
clsA said:
Hello
first thing don't panic. If you can get in TWRP it's easy to fix
hold volup+voldown+power to get back to TWRP
hook the phone to your PC and copy this stock recovery to your sdcard
Now in TWRP choose Install / Image choose the recovery.img the tick the recovery box / then swipe to flash. You now have stock recovery.
Click to expand...
Click to collapse
There's the problem, at the moment I can't, when I keep pressed any button when the phone is off it won't boot, but when I release them the phone tries to boot up normally. Last night the phone ran out of battery, I put it to charge and gave me a signal of life. I'll try to access to TWRP when the phone ends it's charge
Darkanimus said:
There's the problem, at the moment I can't, when I keep pressed any button when the phone is off it won't boot, but when I release them the phone tries to boot up normally. Last night the phone ran out of battery, I put it to charge and gave me a signal of life. I'll try to access to TWRP when the phone ends it's charge
Click to expand...
Click to collapse
unplug the phone from the charger before trying the volup+voldown+power
sometimes I let it reboot once and then let go power and hold just the volume keys and it will go into recovery. other time just volume up + power takes you to recovery
the phone is pretty strange like that
clsA said:
unplug the phone from the charger before trying the volup+voldown+power
sometimes I let it reboot once and then let go power and hold just the volume keys and it will go into recovery. other time just volume up + power takes you to recovery
the phone is pretty strange like that
Click to expand...
Click to collapse
Tried VolUp+VolDown+Power and didn't work, tried just VolUp+Power a neither. Mantained just VolUp+VolDown and now it looks like accessed to EMUI Recovery (The screen shows the EMUI logo and says "Huawei software installing. DO NOT unplug usb or press any key"). Not idea what to do now
Darkanimus said:
Tried VolUp+VolDown+Power and didn't work, tried just VolUp+Power a neither. Mantained just VolUp+VolDown and now it looks like accessed to EMUI Recovery (The screen shows the EMUI logo and says "Huawei software installing. DO NOT unplug usb or press any key"). Not idea what to do now
Click to expand...
Click to collapse
if it installs your phone should boot up
clsA said:
if it installs your phone should boot up
Click to expand...
Click to collapse
It's stuck at 0%. I connected the device to the PC and tried to access Recovery via adb. It doesn't recognize my phone.
Darkanimus said:
It's stuck at 0%. I connected the device to the PC and tried to access Recovery via adb. It doesn't recognize my phone.
Click to expand...
Click to collapse
reboot it again with power plus voldown
clsA said:
reboot it again with power plus voldown
Click to expand...
Click to collapse
Nothing happened. Rebooted and it's stuck again at the first Honor screen. I can still access to the EMUI download mode but I can't access to the TWRP (or at least I don't know how)
EDIT: adb recognizes that the phone it's connected when it's at the Honor screen but it's unauthorized
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Darkanimus said:
Nothing happened. Rebooted and it's stuck again at the first Honor screen. I can still access to the EMUI download mode but I can't access to the TWRP (or at least I don't know how)
Click to expand...
Click to collapse
did you ever put the full update.app on your ext_sdcard ?
download the Full update from my file depot and put it in your ext_sdcard / dload
then boot to this download mode you call it
clsA said:
did you ever put the full update.app on your ext_sdcard ?
download the Full update from my file depot and put it in your ext_sdcard / dload
then boot to this download mode you call it
Click to expand...
Click to collapse
Just made it, still stuck at 0%. Is there a way to authorize the device in this state on adb to reboot to recovery?
Darkanimus said:
Just made it, still stuck at 0%. Is there a way to authorize the device in this state on adb to reboot to recovery?
Click to expand...
Click to collapse
to enter fastboot mode
1. Place the device in fastboot mode:
Turn off the device. (then wait for at least 2 seconds) For a mobile phone, press and hold the volume down and power keys simultaneously for at least 10 seconds (for a tablet, press and hold the volume up and power keys).
2. If the above operations do not switch the device to fastboot mode, please try the following steps:
Turn off the device. (then wait for at least 2 seconds) Then insert the USB cable and press and hold the volume down and power keys simultaneously for at least 10 seconds.
Step 2 worked for me every time
clsA said:
to enter fastboot mode
1. Place the device in fastboot mode:
Turn off the device. (then wait for at least 2 seconds) For a mobile phone, press and hold the volume down and power keys simultaneously for at least 10 seconds (for a tablet, press and hold the volume up and power keys).
2. If the above operations do not switch the device to fastboot mode, please try the following steps:
Turn off the device. (then wait for at least 2 seconds) Then insert the USB cable and press and hold the volume down and power keys simultaneously for at least 10 seconds.
Step 2 worked for me every time
Click to expand...
Click to collapse
Followed the steps in this thread: http://forum.xda-developers.com/honor-5x/help/bricked-honor-5x-t3328308
Rebooted to Download Mode, then rebooted normally and now it's normal. Thanks anyway
Darkanimus said:
Followed the steps in this thread: http://forum.xda-developers.com/honor-5x/help/bricked-honor-5x-t3328308
Rebooted to Download Mode, then rebooted normally and now it's normal. Thanks anyway
Click to expand...
Click to collapse
that's what I said to do in post 15 and you said it was stuck at 0%
O well glad you figured it out.
Darkanimus said:
Followed the steps in this thread: http://forum.xda-developers.com/honor-5x/help/bricked-honor-5x-t3328308
Rebooted to Download Mode, then rebooted normally and now it's normal. Thanks anyway
Click to expand...
Click to collapse
Hey man I did the same thing as you but now I want to root my phone and can't get twrp on it. Are you able to get twrp back?
Hi all
Yesterday I flashed what supposed to be pixel experience rom and then it appears to be lineages 18 , but the phone now not entering recovery mode neither download mode and appears this message in screen , any one have solution?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you want to try this rmm bypass
[GUIDE][17.06.2019] RMM/KG bypass - Root/Install TWRP on Exynos Samsung after 2018
UPDATE 17.06.2019 - NEW RMM/KG bypass patch UPDATE 23.02.2019 - Pie and more Please take some time and read carefully the whole post. I am not and i won`t be responsable for anything. Disclaimer I am not responsible for bricked devices, dead...
forum.xda-developers.com
allosh99 said:
Hi all
Yesterday I flashed what supposed to be pixel experience rom and then it appears to be lineages 18 , but the phone now not entering recovery mode neither download mode and appears this message in screen , any one have solution? View attachment 5171281
Click to expand...
Click to collapse
YES I ALSO GOT SAME PROBLEM PLS ANYONE HELP
aravinddefy said:
YES I ALSO GOT SAME PROBLEM PLS ANYONE HELP
Click to expand...
Click to collapse
This is my fixing problems
( download official lastest rom from samsung and prepare odin)
Just let the phone boot into lineage rom
Turn on developers option
Turn on usb debugging
Then connect phone with pc
Open adb
Type adb devices
Allow pc connect to device then type adb reboot download
Then the phone will boot to download mode
Flash rom via odin- done
The problem is the phone continue rebooting I can't enter the system or recovery or download mode
allosh99 said:
The problem is the phone continue rebooting I can't enter the system or recovery or download mode
Click to expand...
Click to collapse
That's odd. Try to hold volume down+ bixby+ power button and release. It may boot into lineage.
Nothing is working it keeps on booting again and again and stuck in the logo screen can't enter bootloader or lineage os stuck in middle anyone help
CyderXDA said:
That's odd. Try to hold volume down+ bixby+ power button and release. It may boot into the lineage.
Click to expand...
Click to collapse
Nothing is working it keeps on booting again and again and stuck in the logo screen can't enter bootloader or lineage os stuck in middle anyone help
Try this.
1. Open up Odin in your PC, make sure you got the USB drivers installed too.
2. Connect your phone with the cable.
3. Hold Vol Down + Power, to cold reboot.
4. As soon as it reboots, QUICKLU HOLD Vol Down + Bixby + Power button.
I've locked myself on the Kernel issue when changing CSC, and found out that this was the only way i could get in to Download Mode. It wont go inside if the cable is not connected to the PC and Odin isn't up.
It can be tricky to find that perfect moment for pressing the buttons, so dont give up easily.
If you notice no luck, Repeat the same process, but make the cable ready but dont connect it, cold-reboot and as soon as it reboots, connect the cable and do the download mode button layout.
PlutoDelic said:
Try this.
1. Open up Odin in your PC, make sure you got the USB drivers installed too.
2. Connect your phone with the cable.
3. Hold Vol Down + Power, to cold reboot.
4. As soon as it reboots, QUICKLU HOLD Vol Down + Bixby + Power button.
I've locked myself on the Kernel issue when changing CSC, and found out that this was the only way i could get in to Download Mode. It wont go inside if the cable is not connected to the PC and Odin isn't up.
It can be tricky to find that perfect moment for pressing the buttons, so dont give up easily.
If you notice no luck, Repeat the same process, but make the cable ready but dont connect it, cold-reboot and as soon as it reboots, connect the cable and do the download mode button layout.
Click to expand...
Click to collapse
thanks bro tried for 2 hours but nothing is working tried everysteps
ANYONE THERE TO HELP PHONE IS BOOTLOOPING CAN'T ENTER DOWNLOAD MODE OR RECOVERY MODE ANY OTHER WAY TO ENTER DOWNLOAD MODE AND I HAVE ALSO TRIED Samsung 300K Tool THIS IS ALSO NOT WORKING
ANYONE THERE TO HELP PHONE IS BOOTLOOPING CAN'T ENTER DOWNLOAD MODE OR RECOVERY MODE ANY OTHER WAY TO ENTER DOWNLOAD MODE AND I HAVE ALSO TRIED Samsung 300K Tool THIS IS ALSO NOT WORKING
Any help out there
Can't you just flash official rom from the screen you show in the first post? It doesn't necessarily need to boot into proper download mode to flash official rom. I mean your phone cannot boot into download mode, so just try to flash the rom from the screen.
hello everyone, i have a technical question. is it possible to root lineage 18.1 (android 11) only by operating on a working system ?? (something like kingoroot) ... after gaining root, you can access the partition and load recovery again ....
I am probably the first victim of uploading this fake software, after analyzing the rom on the telegram (exynos 9810), wise heads said that after uploading the software, the lack of recovery and the download mode is a deliberate action of the perpetrator. so I think root can help, I remember that I performed a similar operation when I could not connect the tablet galaxy tab 2 to the pc, then root and upload the recovery from a working android ....
ANYONE THERE TO HELP PHONE IS BOOTLOOPING CAN'T ENTER DOWNLOAD MODE OR RECOVERY MODE ANY OTHER WAY TO ENTER DOWNLOAD MODE AND I HAVE ALSO TRIED Samsung 300K Tool THIS IS ALSO NOT WORKING
aravinddefy said:
ANYONE THERE TO HELP PHONE IS BOOTLOOPING CAN'T ENTER DOWNLOAD MODE OR RECOVERY MODE ANY OTHER WAY TO ENTER DOWNLOAD MODE AND I HAVE ALSO TRIED Samsung 300K Tool THIS IS ALSO NOT WORKING
Click to expand...
Click to collapse
Did you find a solution?
ANYONE THERE TO HELP PHONE IS BOOTLOOPING CAN'T ENTER DOWNLOAD MODE OR RECOVERY MODE ANY OTHER WAY TO ENTER DOWNLOAD MODE AND I HAVE ALSO TRIED Samsung 300K Tool THIS IS ALSO NOT WORKING
aravinddefy said:
ANYONE THERE TO HELP PHONE IS BOOTLOOPING CAN'T ENTER DOWNLOAD MODE OR RECOVERY MODE ANY OTHER WAY TO ENTER DOWNLOAD MODE AND I HAVE ALSO TRIED Samsung 300K Tool THIS IS ALSO NOT WORKING
Click to expand...
Click to collapse
I replaced the motherboard in my own, I am waiting for a way to root from the level of the system itself, it should be possible to do a flash recovery partition and bootloader ..... the old motherboard is waiting for better times