Hello everyone,
after putting my phone in download mode, I flashed the wrong kdz, so now it doesn't boot in anyway:
I have no fastboot, no download mode, it does not switch ON.
I found several guides on the internet , but none of them seems to work.
Can you help me? Thanks
eagle93 said:
hello everyone,
after putting my phone in download mode, i flashed the wrong kdz, so now it doesn't boot in anyway:
I have no fastboot, no download mode, it does not switch on.
I found several guides on the internet , but none of them seems to work.
Can you help me? Thanks
Click to expand...
Click to collapse
i have this same problem
Hi,
same issue - Unbrick LG V10 (H960a) stuck in Qualcomm HS-USB QDLoader 9008 mode
Ive searched and find several solutions, buitr not for H960a.
Like:
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
Do anybody have IMG for SD card to boot to downloadmode and fix this brick?
Mayby any familiar version wioll work too (Ive tried already H9012j, H81120o, and H901)
This also did not worked
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
hai friends please help me.. my v10 is F600L but my friend by mis falshed with h961N that one dual sim and my F600L is single sim after flash no network so I tried to falsh back to F600L but my phone dead now after 90% flash.
only vibrate when i press power button
pc also not detecting anything like qhsusb or nothing
no download mode nothing
please any expert here help me...
hope any guy know about it
thanks in advance
Lg v10 h960a
Hi, I have the same problem, could you fix it? Thank you
I'm fighting with my fiends phone for over 3 days now, same as yours 960A. What i did is, try to heat the CPU up, rly rly high, and then try to turn on/fastboot it. If its not working, put it into freezer, and try to boot it inside a freezer. After 2 days i managed to get to fastboot few times, flashed stock firmware and right now im stuck on bootloop, but that is fixable. Just play around with heat, this phone is bricked anyways so dont be scared to take of heat sink and just blow your hair dryer straight to CPU.
xsoft said:
Hi,
same issue - Unbrick LG V10 (H960a) stuck in Qualcomm HS-USB QDLoader 9008 mode
Ive searched and find several solutions, buitr not for H960a.
Like:
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
Do anybody have IMG for SD card to boot to downloadmode and fix this brick?
Mayby any familiar version wioll work too (Ive tried already H9012j, H81120o, and H901)
This also did not worked
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Click to expand...
Click to collapse
Pls share the lg v10 H9012j.img file pls.
Related
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Costi979 said:
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Click to expand...
Click to collapse
So use ZTE tool studio emmc tool to unbrick your android.
Follow guide of Androidbrick.com.
The tool posted on these site is actually a ZTE tool studio tool by name of Androidbrick tool.
Just Google and download it from torforum.org
Already tried,not working.I cannot swich phone in download mode
Costi979 said:
Already tried,not working.I cannot swich phone in download mode
Click to expand...
Click to collapse
These tool unbrick your android when no fastboot, no recovery, not booting by anyways. Just detects in 9008 port. I am sure it's better than Qfil.
That`s the problem with port detection
How does this happened ?
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Barnabe02 said:
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Click to expand...
Click to collapse
Sorry if u have issues to. My problem started when i erased via adb one partition . Twrp works fine
Hi I messed up with my LG G5, help needed ?
I want to tell u what i did until now.
I want to root my phone:
1. Unlock Bootloader.
2. Install TWRP
3. Messing around in TWRP becaus i dont finde the SuperSU files cause of encryption usw.
4. Want to Swipe all data and start all over again
5. bootet my device normaly and ther is just the Message "Your device software cant be checked for corruption".
I cant do anything now. I tried to factory reset the phone didnt work. The phone doesnt react to any CMD commands.
I cant enter the TWRP.
I used LG UP to flash the device but LG UP doesnt recognizes my phone correctly, neither in USB Download Mode or in the so calles status, where i just got the blackscreen with the Message"Your device software cant be checked for corruption".
Maybe you guys have a solution.
PS. Sorry for bad english
as long you can start into download mode, your device is not bricked.
this thread should help installing and using LGUP correctly.
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
you have a KDZ for install?
zebulon98 said:
as long you can start into download mode, your device is not bricked.
this thread should help installing and using LGUP correctly.
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
you have a KDZ for install?
Click to expand...
Click to collapse
Thanks i did that and it worked. Thx to you mate problem solved
LG G5 Bricked
Hi guys...
I messed my LG G5 up trying to flash t-mobile nougat kdz via twrp on my rooted 7.0 vodafone branded phone (i wanted to use the WLAN calling feature).
Nothing works, no buttons pushing + power / up / down volume... The ONLY thing, that makes
a sign of life is the windows-sound when connecting the USB cable... there's a device shown
QUSB__BULK (not properly installed) and that's all..
I tried installing USB drivers for the LG G5 and also the Suite / LGUP / LG Mobile Support Tool / Bridge...
nothing works... is there any possible way to to fix it?
Thanks in advance for any kind of help...
mryo said:
Hi guys...
I messed my LG G5 up trying to flash t-mobile nougat kdz via twrp on my rooted 7.0 vodafone branded phone (i wanted to use the WLAN calling feature).
Nothing works, no buttons pushing + power / up / down volume... The ONLY thing, that makes
a sign of life is the windows-sound when connecting the USB cable... there's a device shown
QUSB__BULK (not properly installed) and that's all..
I tried installing USB drivers for the LG G5 and also the Suite / LGUP / LG Mobile Support Tool / Bridge...
nothing works... is there any possible way to to fix it?
Thanks in advance for any kind of help...
Click to expand...
Click to collapse
there is an answer by autoprime to your question
autoprime said:
The unique programmers required for the G5 for BoardDiag to work are not public so forcing your way into 9008 won't get you anywhere.
Click to expand...
Click to collapse
with 9008 he means qhsusb_bulk. The drivers you will need are from Qualcomm, once BoardDiag files for G5 are public.
were the boarddiag files ever made public?
Facing the Same problem
I am now facing the above mentioned problem. My g5 h850 doesn't do anything and the only sign of life there is when i connect it to my PC and it picks up as Qualcom hs- usb Qdloader 9008 other than that no display no sound from the handset whatsoever tried getting it into download mode but it won't show anything. I installed all the drivers and tried connecting with lg up but it doesn't pick the phone on any com ports. Is my phone completely damaged or can I do something to bring it back to life. Please help someone
qfil with firehose or octoplus may solve your problem
Can't find the required files anywhere
sbacham said:
qfil with firehose or octoplus may solve your problem
Click to expand...
Click to collapse
QFIL needs PrimaryGPT_0.bin file through firmware extractor but no matter what stock firmware i extract I get multiple patch files like PrimaryGPT_0.bin, PrimaryGPT_1.bin, PrimaryGPT_2.bin, PrimaryGPT_3.bin .......PrimaryGPT_7.bin and when I try to get them through emmc it won't recognize any of the GPT files. That's the step where I am stuck plus I can't seem to find the mbn file for H850
I have lg v20, I too hardbricked my phone, when I extract any kdz I got 7 gpt files. primarygpt0 to primarygpt06 as you said.
are you sure we only need primargpt0 to flash via qfil? i think we need proper firehose/ programmer file and rawprogram file
Maybe I hard bricked mine:
Flashed with uppercut in download mode but with every KDZ file in UPGRADE mode I tried , after the second lg logo with sound of wellcome, it freeze and reboot over and over, it seems that crushes in infinite bootloop. Is this hard bricked?
no, this is not hardbricked. atleast you can enter into download mode.
trash195 said:
Hi I messed up with my LG G5, help needed ?
I want to tell u what i did until now.
I want to root my phone:
1. Unlock Bootloader.
2. Install TWRP
3. Messing around in TWRP becaus i dont finde the SuperSU files cause of encryption usw.
4. Want to Swipe all data and start all over again
5. bootet my device normaly and ther is just the Message "Your device software cant be checked for corruption".
I cant do anything now. I tried to factory reset the phone didnt work. The phone doesnt react to any CMD commands.
I cant enter the TWRP.
I used LG UP to flash the device but LG UP doesnt recognizes my phone correctly, neither in USB Download Mode or in the so calles status, where i just got the blackscreen with the Message"Your device software cant be checked for corruption".
Maybe you guys have a solution.
PS. Sorry for bad english
Click to expand...
Click to collapse
Hi . I I would like to know did you slove your problem ? If yes then what you did plz let me know I’m having same problem with my lgh850.
Hello everyone!
I'm not good at English, so I'm sorry if it is difficult for you to understand my English.
I downgraded from Andoroid 6 to Android 5.1 using LGUP.As a result, when turning on the power of v 10, the power will be turned off after the LG logo appears.I wasn't able to enter the download mode.
It is recognized as Qualcomm HS-USB QDLoader9008 now.
Please tell me how to fix it.
mr.bushido252 said:
Hello everyone!
I'm not good at English, so I'm sorry if it is difficult for you to understand my English.
I downgraded from Andoroid 6 to Android 5.1 using LGUP.As a result, when turning on the power of v 10, the power will be turned off after the LG logo appears.I wasn't able to enter the download mode.
It is recognized as Qualcomm HS-USB QDLoader9008 now.
Please tell me how to fix it.
Click to expand...
Click to collapse
Yes there is a chance to fix your probleme by Sdcard dump look in the section lg v10 you find article how to proceed.have a nice night
magma506 said:
Yes there is a chance to fix your probleme by Sdcard dump look in the section lg v10 you find article how to proceed.have a nice night
Click to expand...
Click to collapse
Thank you.
I probably saw the article.
↓
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
But I do not have dump.img of H961n.
I could find dump.img of H901.
I want dump.img of H961N. . .
pls can tell me what you do ihave h916n brocked
please i want to know if there is any update happened with you because i have also h961n and i cant find the image file
i tried to extract the rom into many .bin files but which file i should take to burn on the SD card
please this is my email: [email protected]
and facebook : the.amr.world
let me know if you have any new and off course me too i will inform you
LG H961N - Qualcomm HS-USB QDLoader 9008 Mode
mr.bushido252 said:
Thank you.
I probably saw the article.
↓
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
But I do not have dump.img of H961n.
I could find dump.img of H901.
I want dump.img of H961N. . .
Click to expand...
Click to collapse
I have LG H961N, I tried the link mentioned. I used Samsung 32GB SD card, flashed H901 disk image (this seems to be a DD image, checked using Rufus). With the battery plugged in, the phone would turn on after 10mins and all I see is just the LG logo screen and nothing happens after that. I couldn't get it in download mode as it takes 10mins to get to the LG logo screen. Once I get the LG logo screen, I see "LGE androidnet usb serial port (com no.)" in the device manager. I tried LGUP, where the device type couldn't be identified for further process. Same thing with LGNPST, QFIL doesn't help. I wonder if the SD card should be 64GB as the disk image shows 58.24GB size in Windows Disk Management utility.
I have a LG K7 MS330 whose software was not working properly. Looking for a solution, I found that there were several firmware updates of this terminal (I had the version 10e compilation), which basically consisted of more recent versions of compilation distributed in kdz files. I proposed to download the latest update available ensuring I download the file corresponding to the smartphone region (MTP in my case).
So, I downloaded the file MS33010k_00_0405.kdz, the tool LGUP 1.14.3 and the file LGUP_MS330.dll version 0.1.2.7. I connected the phone to the PC and started the process.
At 99% the installation failed. However, I could still enter in download mode. So, I download an older version, the MS33010h_00_1021.kdz and repeated the process. This time I got no error.
However, when I finished, my phone went into hardbrick mode. Check the battery and no problem, even charging perfect inside the phone. I do not think the device has any problem with hardware as it worked before. The only life signal I have now from the device is connecting it via USB to PC and press the VOL +, VOL- and POWER buttons simultaneously. In this way, Windows recognizes it as "unknown usb device".
I would be grateful to anyone who can help me with this problem. Regards
I have the same problem!! Please!!
WOoh, I can't believe it. I have the same HEAD-BRICK, because my head has really bricked with this. I came here looking for answers and I just found that someone have the same problem than me, and with no answer. I did similars procediments before I get the hardbrick mode. Please, someone help me, I will really apreciate your help!!!! I really need to fix this!!! Please Please Please :crying: :crying:
i have the same problem too can some one help... no download mode.. no
emergency mode...please
Same.. Did anyone find out how to fix it?
Same issue... stuck in Qualcomm mode.
Any fix yet?
Need an mbn file for this K7. Looks like the only
Hope is finding the qfil file and firehose? Firehouse?. I forget. Xml file. If anyone has leads to where to start or links. It
Would be appreciated. Thank.
I have the exact same problem
I have the exact same problem that you have. I flashed an older rom by accident and now the screen is black and it is detected as qdloader9008. If anyone has found the firehose and the rest of the QFIL files then please help us.
I wanted to install the lineage firmware on my lg g2 phone, the instructions said to downgrade the bootloader version after I encountered a problem that the phone does not turn on; boot certification verify. What to do as quickly as possible I want to solve the problem, in other guides on xda the pictures or links are not working, the specific id of my phone LG G2 D802, sorry for my bad English. and i have black screen boot. help plz. thank you
I want to add that when connected to a PC, it is defined as Qualcomm hs-usb Diagnostics 9006
and create more disk about 10-13 and 1 disk have files
adb dont work . fastboot too . help plz