Hi;
actually I´m having an issue with a Kenzo device.
If unlocked the bootloader (unoffically), flashed TWRP and Ressurrection Nougat. With this ROM I did not get a GPS fix or Mobile Network Connection. SIMs were detected and PIN coud be entered.
I went back to Stock Marshmallow and lost baseband and IMEI but I could recover it by installing modems and IMEI.
GPS is working now (but not with CM based ROMs), SIM is detected but there is no connection to Network: Wifi is working fine. Manual and automatic search for Networks are not working?
I think you need to unlock it unofficially using MIUI8, are you unlocking via flashing MIUI7?
http://en.miui.com/thread-345728-1-1.html
unofficially. But I guess I have just found the problem. It´s not Kenzo but Kate. How can I fix this?
Related
Hi. After installing custom recovery and flashing different ROMs i lost IMEI and mobile network. I have since gone back to official 3.22 and restored IMEI. Sim card is detected but not connecting to any network. If anyone can help please...
Hi!
My phone is Redmi Note 3 SD, Kate version.
I've been using cm14 for a few months and then decided to flash nitrogen os. After flashing I can't call or receive calls from anybody, since my phone can only connect to LTE, but not 2g or 3g, and my network operator doesn't support VoLTE. I can still use data connection on LTE and send/receive text messages. My phone also connects to my Wifi network. When I select 2g only, 3g only or 2g/3g in settings I get no signal at all. My sim card and carrier (while connected to LTE only) are being detected, I have the correct IMEI. I've tried flashing MIUI through fastboot, flashing CM13, CM14 and flashing different kate firmwares on every rom. Does anybody know what to do?
I solved the issue by installing Network Guru and selected WCDMA in RAT locking menu. Then i selected clear forcings and the problem was gone.
sheo said:
I solved the issue by installing Network Guru and selected WCDMA in RAT locking menu. Then i selected clear forcings and the problem was gone.
Click to expand...
Click to collapse
I have the same exact problem, but on a Kenzo.. I don't have 2g/3g in Nitrogen OS, Xenon HD or Lineage os... but I have them on any miui ROM (official global dev/stable and xiaomi.eu)
But the strange thing is that I've been using Xenon HD and the Nitrogen OS for months without any problem... Before I try your solution, can you confirm your solution applies to the same problem?
TIA,
Gustavo Melo
I didn't have 2g or 3g on MIUI roms too. I recommend you to try it, you've got nothing to lose
You need root though.
---------- Post added at 12:58 AM ---------- Previous post was at 12:41 AM ----------
sheo said:
I didn't have 2g or 3g on MIUI roms too. I recommend you to try it, you've got nothing to lose
You need root though.
Click to expand...
Click to collapse
Well... I don't know what to say... I tried the app still on miui (xiaomi.eu), and did what you described (even if the problem didin't exist on MIUI)... Then installed Nitrogen OS and... I have 2g/3g!... the only difference on this install is that I activated the phone without the SIM...
One of the two: or the Network guru app I used on miui persisted even after installing Nitorigen, or activating without SIM did the trick...
Thank you either way!
Eject your simcard
*#*#4636#*#*
And choose LTE,wcdma,gsm auto
Sent from my Redmi Note 3 using XDA-Developers Legacy app
sheo said:
I solved the issue by installing Network Guru and selected WCDMA in RAT locking menu. Then i selected clear forcings and the problem was gone.
Click to expand...
Click to collapse
Oh my God thank you! I finally have connection on H and 3g.
I am facing same problem on poco x3 nfc from last 4 days , during 1.5 years it was working perfect
please give me the solution and tell me is it completely software problem or it might be hardware problem??
Hello
I have a problem with my Redmi Note 3 (kenzo). After updating to the latest Xiaomi.eu ROM version (7.2.24) I cannot get the sim cards to work. They varies between not being detected at all, and being detected, but not being able to connect to the networks.
I still have an IMEI for both slots, as well as MAC address for wifi/bluetooth, but the baseband version is "unknown". The sim cards works in another phone (and other sim cards don't work in this).
I'm not really sure where to start looking, so any help is appreciated.
cadiremar said:
Hello
I have a problem with my Redmi Note 3 (kenzo). After updating to the latest Xiaomi.eu ROM version (7.2.24) I cannot get the sim cards to work. They varies between not being detected at all, and being detected, but not being able to connect to the networks.
I still have an IMEI for both slots, as well as MAC address for wifi/bluetooth, but the baseband version is "unknown". The sim cards works in another phone (and other sim cards don't work in this).
I'm not really sure where to start looking, so any help is appreciated.
Click to expand...
Click to collapse
I have same on my Kate . Everything working great and it has baseband version -8976_GEN_pack-xxxxxxxxx...... I know its a different file for Kenzo but likely related to file you downloaded. Either you downloaded wrong one(xiaomi.eu_multi_HMNote3Pro_7.2.24_v8-6.0.zip) or the file got corrupted somewhere along the way.
I suggest you do the whole process again.
Have you checked your phone is a Kenzo ?
https://www.reddit.com/r/Xiaomi/comments/5x1zgq/remi_note_3_pro_kenzo_baseband_unknown_and_no/
I am on 7.2.24 and i have no problems as such. I updated it from 7.2.16 via in built Updater app. I have zcx twrp installed. Since you have unknown baseband, my advice would be flash the latest firmware.....If unsuccessful then flash using MI flash tool via EDL mode
Hi all
Im owning Kate device, certified by xiaomi it a KATE device as i check online by IMEI and SN
However when i flash official miui for Kate through EDL method, 'clean all', my phone will have signal issue, i check inside settings, the radio service is not turning on, IMEI still intact, Simcard is detected however still no signal
I need to fix it by flashing KENZO modem or kenzo rom to fix the issue.
May i know how to fix this
is it gonna be an issue if im using kate but flash kenzo rom/modem , as for my checking there some issue with 4g turn to 3g frequently. :crying:
Would not advise it, "kenzo" modem firmware has drivers for other sensors than just the connectivity, ie fingerprint etc.
I would advise to search for another solution if possible for your problem. Maybe check the APN settings are correct for your provider!
added apn setting as suggested by telco, still the same no line
in Kate modem/rom if i accces #*#*4636$#*#* i can see radio signal is turn off. cannot turn on even press and wait many times
if i flash kenzo modem, i can set on and off the signal.
anyone know any related fix.
Hi guys, my uncle has given me his redmi 5 plus (Vince) for tinkering around or to fix, to say.
It was dead after minor ingress of water droplets. And person who my uncle gave phone to, recovered the mobile but it's IMEI numbers are lost.
So it's not getting any network.
So far I tried to flash lot many ROMs on it, developer global, global stable, China stable but condition is same.
Strange thing I observed is, in fastboot mode miflashtool gives error for all the ROMs...
Modem error.
And I can flash successfully only in edl model with testpoint method.
Btw mobile is stock, i.e bootloader is locked and it's not rooted. Has stock recovery as well.
And I can't unlock bootloader without Sims functioning based on requirements of xioami.
I could re instate imei numbers finally with one desktop app and opening diag port with ussd code but still mobile isn't getting any network (with back cover opened. I haven't installed it back yet since it's too hard to remove it if required. Don't know whether it has something to do with network reception.)
Don't know what's the reason as I am not aware of telecom technicalities like baseband etc.
So any inputs are welcome and appreciated.