i totally ****ed up my LeMax2 indian verson ie x821.I can still boot into recovery and fastboot mode however i have no idea how to flash stock rom.I searched all over the net but i found no guide on how to unbrick Indian LeMax2.There was a guide about unbriking chinese LeMax2,however i am not sure about using Chinese stock rom on a indian version of LeMax2...Help me out guys.Please refer me to a guide and post links for indian stock rom
Damin81 said:
i totally ****ed up my LeMax2 indian verson ie x821.I can still boot into recovery and fastboot mode however i have no idea how to flash stock rom.I searched all over the net but i found no guide on how to unbrick Indian LeMax2.There was a guide about unbriking chinese LeMax2,however i am not sure about using Chinese stock rom on a indian version of LeMax2...Help me out guys.Please refer me to a guide and post links for indian stock rom
Click to expand...
Click to collapse
Did you wipe your ROM? Bad flash?
Doesn't sound like your bricked. I assume you made a backup of your ROM. All you need to do is boot into your recovery, push your backup to your phone storage. Flash, or flash from your computer. Easy. Lots and lots of guides on XDA. I think all of the le max 2 models are the same device, the name just points to the region.
@sanke1 also put together some stock links :
https://forum.xda-developers.com/le-max-2/how-to/le-max-2-official-stock-firmware-links-t3433761
Supertacomonkeyexplosion said:
Did you wipe your ROM? Bad flash?
Doesn't sound like your bricked. I assume you made a backup of your ROM. All you need to do is boot into your recovery, push your backup to your phone storage. Flash, or flash from your computer. Easy. Lots and lots of guides on XDA. I think all of the le max 2 models are the same device, the name just points to the region.
@sank1 also put together some stock links :
https://forum.xda-developers.com/le-max-2/how-to/le-max-2-official-stock-firmware-links-t3433761
Click to expand...
Click to collapse
I had a backup that i was trying to restore but it didnt complete successfully,hence my bricked LeMax2..Then when i tried to restore again ,it threw cant moutnt system partition error and then i tried to repair system partition.That deleted everything on my internal storage.Thanks for the reply though i pushed a rom i had downloaded earlier and flashed it.Its working now.Thanks for the hint
Related
Hello Guys ..
I have a problem in updating my sensation xl
after i root it and installed CWM then i recovered the previous software version
i checked for update and it was available update to ICS
after the download is finished the phone rebooted and then the CWM logo is appeared and did nothing
I re-Locked the device and tried again
after the reboot showed me warning and did nothing also
Im trying to remove the CWM but i don't know what to do ?
is the CWM is responsible for all these ?
and how can i remove it ??
if not then what should i do ?
plz need ur help
Dont worry
it seems your phone is a little messed up
just search for the stock rom (you mentioned ics is released so try to find it)
look in the xda for a flashing guide for ur phone and flash the ics stock rom
jiffer1991 said:
Dont worry
it seems your phone is a little messed up
just search for the stock rom (you mentioned ics is released so try to find it)
look in the xda for a flashing guide for ur phone and flash the ics stock rom
Click to expand...
Click to collapse
thanks for replay
you mean just download and install the stock rom and every thing will return to normal ?
yap the stock rom you have to flash with odin contains the whole original software
after flashing its like ure unboxing the phone after buying it
it will whipe all your data even the root acces and the cwm ure back on stock recovery afterwards.
http://www.android-hilfe.de/custom-...401-x-ice-cream-sandwich-htc-sense-3-6-a.html
if you dont know how to use odin look here in the xda forum for a tutorial
after flashing go to recovery and whipe data/cash
Hi firends.
İ have tried to install multilang rom for p780 with cwm5.0.4. after this phone cant open stuck at reboot on logo.
i installed rom but phone doesnt open, tried sp flash tool and get 8083 error code. Tried many rooms with cwm and flash. Everything ok with Cwm but still stuck at reboot.
and tried to upgrade cwm but it didnt work. it seems done but not change to cwm6 still cwm5.
ty for helps,
badcatbad said:
Hi firends.
İ have tried to install multilang rom for p780 with cwm5.0.4. after this phone cant open stuck at reboot on logo.
i installed rom but phone doesnt open, tried sp flash tool and get 8083 error code. Tried many rooms with cwm and flash. Everything ok with Cwm but still stuck at reboot.
and tried to upgrade cwm but it didnt work. it seems done but not change to cwm6 still cwm5.
ty for helps,
Click to expand...
Click to collapse
an u are sure that the rom u try to flash is fore ur phone
-fluffy- said:
an u are sure that the rom u try to flash is fore ur phone
Click to expand...
Click to collapse
Yes, installed in needrom site. and wipe cashe and data reset not working too.
i think problem is
E. unable to mount /data error when i try anything to do in recovery. İ cant erase cashe, data and dalvick cashe.
Still cant find any solve.
news,
i can flash cwm with sp flasht tool, but cant flash rom.
Sp flash tool error 8038 now.
still working on it.
badcatbad said:
news,
i can flash cwm with sp flasht tool, but cant flash rom.
Sp flash tool error 8038 now.
still working on it.
Click to expand...
Click to collapse
its because its the wrong scatter file
-fluffy- said:
its because its the wrong scatter file
Click to expand...
Click to collapse
Hımm, i installed chineese/english rom only wihch is worked sp flashing.
The others roms gives error when flashing. hopefully i open the phone but cant change rom now.
using needrom sites. this is the one working rom needrom site's p780 (update rom). Others did not work.
is it work i change only scatter file of the rom with worked rom scatter.
there's a different version of CWM/TWRP for Chinese base and ROW base ROMs. I think they have different partition layout. Most, if not all, ROMs from needrom requires Chinese base.
Sent from my Lenovo P780 using Tapatalk
satanduck said:
there's a different version of CWM/TWRP for Chinese base and ROW base ROMs. I think they have different partition layout. Most, if not all, ROMs from needrom requires Chinese base.
Sent from my Lenovo P780 using Tapatalk
Click to expand...
Click to collapse
ty for answer, can u give the links of this type cwm. if u know.
badcatbad said:
ty for answer, can u give the links of this type cwm. if u know.
Click to expand...
Click to collapse
For ROW, I use this:
http://lenovo-forums.ru/topic/1526-recovery-и-root-для-lenovo-ideaphone-p780/
For Chinese based ROMs, I use Mobile Uncle tool to install one. Description is in Chinese though. Be careful if you don't read Chinese and use Mobile Uncle to download, there are several versions for P780, some for ROW some for Chinese ROMs.
But this one seems to be a TWRP for Chinese based ROMs that's in English:
http://dl.vmall.com/c088c04a97
Both can be installed from MobileUncle if they are in the root of your SDCARD.
one quick tip, if you use mobile uncle to flash recovery, after flashing it will ask you if you want to reboot to recovery. don't touch anything at that pop up for about 30s, then press cancel. then you should be good to go. you not it will not be successful.
Sent from my Lenovo P780_ROW using Tapatalk
ty for helps, i will try and notice.
satanduck said:
one quick tip, if you use mobile uncle to flash recovery, after flashing it will ask you if you want to reboot to recovery. don't touch anything at that pop up for about 30s, then press cancel. then you should be good to go. you not it will not be successful.
Sent from my Lenovo P780_ROW using Tapatalk
Click to expand...
Click to collapse
İt was not work for me friend. recovery mode did not open when flashed with mobil uncle. Only working recovery is offiicial rom's recovery.
i flashed it with mobil uncle. But still cant flash anything with this recovery, or sp flash tool.
Only way to rom installing is Offical rom with sp flash tool. CAnt install custom rom any way.
when you say "did not open" what does it mean?
there are several things that may cause this to go bonkers:
1) wrong recovery image for your ROM, i.e. ROW recovery on Chinese ROM
2) recovery is not downloaded correctly, mobile uncle download may not be complete and you flashed it
3) the wait 30s tip not followed. seems like a bug that it's nit finished flashing but it thinks it has, that's why wait about half minute at the pop up
4) later version of stock ROM it will auto reflash stock recovery at reboot! what I did to avoid this is comment off every thing in /system/etc/install-recovery.sh or you can simply rename this file to something else if you don't have init.d hook in it.
Sent from my Lenovo P780_ROW using Tapatalk
---------- Post added at 10:19 AM ---------- Previous post was at 10:16 AM ----------
btw, there are some sp flash roms available with already recovery in English and Chinese, would you like a link to this? are you trying to get Chinese ROM with Chinese recovery or ROW ROM with recovery?
Sent from my Lenovo P780_ROW using Tapatalk
Solved!
Problem was about driver. İ installed right p780 driver and sp flash tool driver. After installed both i flashed.
Ty for helps.
English CWM Please
Someone Please Make a Simple Guide With Links To English CWM.
Since this is a Mediatek Processor Based Device.. The Rooting should be quite easy. For Noobs Use the Bin4ry Rooting Tool. Very Easy & it Even Installs SuperSU
BUT I did not find a reliable English Language CWM. Do not want TWRP (Multiple Bad Experiences).
CWM is simple & appears safe. Hence A Humble Request.
Installing a Recovery is Fairly Simple. Install Mobile Uncle Tools AFTER Rooting... Start It & It will ask for Root Rights.. Give it.. Thereafter there is a simple 'Recovery Update' Button. Mobile Uncle Tools English Version is Available in Play Store!
Since Lenovo has launched P780 in India, an English Language Phone is available. Please Provide English CWM & users will have a GREAT Experience.
Yeah, I'm also looking for CWM in English for Chinese ROM. If anybody has a link, I would be very grateful
I have p780 with stock rom 115ROW, so this is not chinese version... How to upgrade to latest ROW rom? After that, how to root phone and install custom recovery for ROW roms? There's Miui on 4pda which is custom row rom I think... Thanks
CWM 6.0.1.5 - english (flash using mobileuncle or sp flashtool)
https://mega.co.nz/#!nJhmjDqA!NSG4eARyrIPEWmFny4a47gMvCngUaMmQ4c87A9VW3Vk
[Q]Lenovo P780 brick
Hi there,
My lenovo P780 installed TWRP but it can not wipe or do anything (error below), and now it is brick (up room with error), does anyone give me an advice how to fix it or how to put P780 into fastboot mode? Thanks in advance.
E: Unable to mount '/data'
E: Unable to mount '/emmc'
Click to expand...
Click to collapse
First i repartion my lenovo p780 4gb with help of following thread
http://forum.xda-developers.com/lenovo-p780/general/p780-repartition-storage-t2668744
My device storage got reparation into 3 gb and 500 mb format.
After that i tried to install vibe rom from needrom via cwm recovery.
So now because of that my mobile got stuck in boot loop it's kind of restarting every 10 sec and showing black screen !!
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
i am trying the above link but my device does not get detected on windows 8.
bthak said:
First i repartion my lenovo p780 4gb with help of following thread
http://forum.xda-developers.com/lenovo-p780/general/p780-repartition-storage-t2668744
My device storage got reparation into 3 gb and 500 mb format.
After that i tried to install vibe rom from needrom via cwm recovery.
So now because of that my mobile got stuck in boot loop it's kind of restarting every 10 sec and showing black screen !!
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
i am trying the above link but my device does not get detected on windows 8.
Click to expand...
Click to collapse
Hi bro, you need to switch base to China ROM (S125, S129, S135) before flashing Vibe ROM if you are on ROW ROM. Directly flash Vibe ROM will cause you end up in a bootloop and possibly corruption of /nvram.
Nevermind, to flash via SP Flash Tool, you will need to press the red button on the bottom top right side and connect the USB cable to begin flashing process.
And by flashing Vibe ROM after repartitioning will cause the partition restore to default too. (2.5GB /data, 1GB /media)
Reply this post if you need assistance.
soralz said:
Hi bro, you need to switch base to China ROM (S125, S129, S135) before flashing Vibe ROM if you are on ROW ROM. Directly flash Vibe ROM will cause you end up in a bootloop and possibly corruption of /nvram.
Nevermind, to flash via SP Flash Tool, you will need to press the red button on the bottom top right side and connect the USB cable to begin flashing process.
And by flashing Vibe ROM after repartitioning will cause the partition restore to default too. (2.5GB /data, 1GB /media)
Reply this post if you need assistance.
Click to expand...
Click to collapse
Well after lots of try i was finally able to flash my mobile with http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
i suppose this is ur thread :
http://forum.xda-developers.com/showpost.php?p=50507891&postcount=2
can you plz guide me how and from where i can get the chinese rom ?
n won't it be in Chinese language ?
bthak said:
Well after lots of try i was finally able to flash my mobile with http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
i suppose this is ur thread :
http://forum.xda-developers.com/showpost.php?p=50507891&postcount=2
can you plz guide me how and from where i can get the chinese rom ?
n won't it be in Chinese language ?
Click to expand...
Click to collapse
The one in satanduck thread: P780_S135_130917_rooted_twrp_gapps.7z is a China based S135 ROM and flashable via SP Flash Tool ROM. After you flash it then you can flash Vibe ROM. Remember do a wipe after flashing the Vibe ROM.
soralz said:
The one in satanduck thread: P780_S135_130917_rooted_twrp_gapps.7z is a China based S135 ROM and flashable via SP Flash Tool ROM. After you flash it then you can flash Vibe ROM. Remember do a wipe after flashing the Vibe ROM.
Click to expand...
Click to collapse
Well after flashing the chinese rom and then the vibe rom..
If i want to use another custom rom from needrom web do i hve to repeat the same procedure or just go into recovery n install zip..?
bthak said:
Well after flashing the chinese rom and then the vibe rom..
If i want to use another custom rom from needrom web do i hve to repeat the same procedure or just go into recovery n install zip..?
Click to expand...
Click to collapse
Just install the zip, because you are on chinese ROM base already.
So, I flashed a ROM by Baralajbi (needrom:http://www.needrom.com/download/lenovo-p780-4-4-2-vibe-ui-2-0/comment-page-2/#comments) of Vibe 2.0 UI for my Lenovo P780 4GB ROW Kitkat and now I cannot get a netwoek. There is a red cross next to network. Obviously this is a problem of modem so I downloaded some modems for my phone (http://forum.xda-developers.com/lenovo-p780/general/how-modems-t2757923) from there (link given in brackets) and flashed them using recovery (not TWRP or CWP since the rom doesnt have that but the normal Android recovery) and its saying Aborted?!!
Please help! I am new at this and Stympy has helped me quite a lot cuz he suggested the ROMs but how do I fix the no network problem? I love this ROM and want to use it
kri32ablu said:
So, I flashed a ROM by Baralajbi (needrom:http://www.needrom.com/download/lenovo-p780-4-4-2-vibe-ui-2-0/comment-page-2/#comments) of Vibe 2.0 UI for my Lenovo P780 4GB ROW Kitkat and now I cannot get a netwoek. There is a red cross next to network. Obviously this is a problem of modem so I downloaded some modems for my phone (http://forum.xda-developers.com/lenovo-p780/general/how-modems-t2757923) from there (link given in brackets) and flashed them using recovery (not TWRP or CWP since the rom doesnt have that but the normal Android recovery) and its saying Aborted?!!
Please help! I am new at this and Stympy has helped me quite a lot cuz he suggested the ROMs but how do I fix the no network problem? I love this ROM and want to use it
Click to expand...
Click to collapse
Vibe 2.0 can power on ? waiting for someone help you, i need to know too
kri32ablu said:
So, I flashed a ROM by Baralajbi (needrom:http://www.needrom.com/download/lenovo-p780-4-4-2-vibe-ui-2-0/comment-page-2/#comments) of Vibe 2.0 UI for my Lenovo P780 4GB ROW Kitkat and now I cannot get a netwoek. There is a red cross next to network. Obviously this is a problem of modem so I downloaded some modems for my phone (http://forum.xda-developers.com/lenovo-p780/general/how-modems-t2757923) from there (link given in brackets) and flashed them using recovery (not TWRP or CWP since the rom doesnt have that but the normal Android recovery) and its saying Aborted?!!
Please help! I am new at this and Stympy has helped me quite a lot cuz he suggested the ROMs but how do I fix the no network problem? I love this ROM and want to use it
Click to expand...
Click to collapse
why dont you flash TWRP or CWM via mobile uncle tool (available on playstore). follow this threade
original recovery will check MD5 and it will abort if verification fails.
kri32ablu said:
So, I flashed a ROM by Baralajbi (needrom:http://www.needrom.com/download/lenovo-p780-4-4-2-vibe-ui-2-0/comment-page-2/#comments) of Vibe 2.0 UI for my Lenovo P780 4GB ROW Kitkat and now I cannot get a netwoek. There is a red cross next to network. Obviously this is a problem of modem so I downloaded some modems for my phone (http://forum.xda-developers.com/lenovo-p780/general/how-modems-t2757923) from there (link given in brackets) and flashed them using recovery (not TWRP or CWP since the rom doesnt have that but the normal Android recovery) and its saying Aborted?!!
Please help! I am new at this and Stympy has helped me quite a lot cuz he suggested the ROMs but how do I fix the no network problem? I love this ROM and want to use it
Click to expand...
Click to collapse
happened to me once.. the problem is your IMEI i belive. Dialing *#06# showed my Invalid IMEI.. ( if that is your problem than you can just restore IMEI using "mobile uncle" assuming that you already have root in your phone..) then i need to restore my IMEI.. but that need root and i have few problems rooting in Vibe 2.0 (Doesnt root properly).. so using "SP FLASH TOOL" i flash back my old rom (JB 4.2) .... and i have back my network signal.. then doing all over again to flash back KK rom.
mistajoe83 said:
happened to me once.. the problem is your IMEI i belive. Dialing *#06# showed my Invalid IMEI.. ( if that is your problem than you can just restore IMEI using "mobile uncle" assuming that you already have root in your phone..) then i need to restore my IMEI.. but that need root and i have few problems rooting in Vibe 2.0 (Doesnt root properly).. so using "SP FLASH TOOL" i flash back my old rom (JB 4.2) .... and i have back my network signal.. then doing all over again to flash back KK rom.
Click to expand...
Click to collapse
he is having Baseband issue and is not able to flash Modem a.k.a. baseband cause he is having original recovery
NISHANTJ_2K said:
he is having Baseband issue and is not able to flash Modem a.k.a. baseband cause he is having original recovery
Click to expand...
Click to collapse
I know.. If its just baseband maybe you can just copy the modem only (make backup of the old modem in system--etc--firmware before replacing. . . I usually name it to modem.bak) using root explorer. . ive flash this rom and everything is working .. Signal is bad nd tried to change modem by the above method.
You can replace your recovery with TWRP that works properly with kitkat. download twrp an flash it using sp flash tool. Just tick recovery and untick everything else.. Double click recovery and replace with twrp recovery image. Select download. Not firmware upgrade... Tick DA DL AL... and flash.. Ive manage to change my recovery...
Here is proper tutorial.. Im not a good explainer.. Hahahhaa
http://www.theandroidhow.com/2014/06/how-to-flash-stock-custom-recovery-sp-flash-tool.html?m=0
Dont make your own scatter files like in the tutorial.. Use vibeui 2.0 scatter file
mistajoe83 said:
I know.. If its just baseband maybe you can just copy the modem only (make backup of the old modem in system--etc--firmware before replacing. . . I usually name it to modem.bak) using root explorer. . ive flash this rom and everything is working .. Signal is bad nd tried to change modem by the above method.
You can replace your recovery with TWRP that works properly with kitkat. download twrp an flash it using sp flash tool. Just tick recovery and untick everything else.. Double click recovery and replace with twrp recovery image. Select download. Not firmware upgrade... Tick DA DL AL... and flash.. Ive manage to change my recovery...
Here is proper tutorial.. Im not a good explainer.. Hahahhaa
http://www.theandroidhow.com/2014/06/how-to-flash-stock-custom-recovery-sp-flash-tool.html?m=0
Dont make your own scatter files like in the tutorial.. Use vibeui 2.0 scatter file
Click to expand...
Click to collapse
My IMEI is fine!
I just realized that (noob I am) that after installing this Vibe 2.0 ROM, i lost the root priveleges. And then I had problems with SP Flash tool too so couldnt replace the modems and such. Thanks a ton guys!
Although I am too scared to try this ROM again cuz I cant flash it because of drivers not getting detected on my laptop by the SP Flash tool. Can someone upload the rooted version of the rOM or help me in someway? I really liked Vibe 2.0 UI and want it on my phone
kri32ablu said:
My IMEI is fine!
I just realized that (noob I am) that after installing this Vibe 2.0 ROM, i lost the root priveleges. And then I had problems with SP Flash tool too so couldnt replace the modems and such. Thanks a ton guys!
Although I am too scared to try this ROM again cuz I cant flash it because of drivers not getting detected on my laptop by the SP Flash tool. Can someone upload the rooted version of the rOM or help me in someway? I really liked Vibe 2.0 UI and want it on my phone
Click to expand...
Click to collapse
Just Google it and u will find a site where u can download vibe ui 2.0 (by baraljabi)and its prerooted
Sent from my Lenovo P780 using XDA Free mobile app
kri32ablu said:
My IMEI is fine!
I just realized that (noob I am) that after installing this Vibe 2.0 ROM, i lost the root priveleges. And then I had problems with SP Flash tool too so couldnt replace the modems and such. Thanks a ton guys!
Although I am too scared to try this ROM again cuz I cant flash it because of drivers not getting detected on my laptop by the SP Flash tool. Can someone upload the rooted version of the rOM or help me in someway? I really liked Vibe 2.0 UI and want it on my phone
Click to expand...
Click to collapse
KITKAT firmware here!
I have been trying to flash a Micromax Canvas HD A116 stock rom on my phone that went dead all of a sudden 1 day. I do not know what the reason was. I tried all the stock roms from v1 to v5. I also tried SPFT v3.something and also SPFT v5.something. My phone gets detected very well on my laptop and on my PC both with Windows 7 and Windows 10 respectively. Every time I have tried to flash the stock rom, it gives error 5069 no space. I have gone through lots of forums online with regards to this topic. However, there is no concrete solution that i could find anywhere. A few reasons that i could find behind this error are emmc crash, larger rom file size, nand flash could not be detected and partition overlap. I do not know what all these mean except larger rom file size. Anyways, i have used all the stock rom files available for my mmx a116. Any help will be highly appreciated. Also to let u know, I'm a newbee trying to learn everything. Thank you in advance.
maniche0201 said:
I have been trying to flash a Micromax Canvas HD A116 stock rom on my phone that went dead all of a sudden 1 day. I do not know what the reason was. I tried all the stock roms from v1 to v5. I also tried SPFT v3.something and also SPFT v5.something. My phone gets detected very well on my laptop and on my PC both with Windows 7 and Windows 10 respectively. Every time I have tried to flash the stock rom, it gives error 5069 no space. I have gone through lots of forums online with regards to this topic. However, there is no concrete solution that i could find anywhere. A few reasons that i could find behind this error are emmc crash, larger rom file size, nand flash could not be detected and partition overlap. I do not know what all these mean except larger rom file size. Anyways, i have used all the stock rom files available for my mmx a116. Any help will be highly appreciated. Also to let u know, I'm a newbee trying to learn everything. Thank you in advance.
Click to expand...
Click to collapse
Do full wipe in recovery then flash stock rom
Firstly, thank you for answering my question Abdul. What is the meaning of do a full wipe in recovery and then flashing the stock rom? I'm using SP Flash Tool to flash the stock rom and my phone is totally dead. It only gets detected in my laptop because I have installed the correct drivers while flashing it. But end up in error 5069.
maniche0201 said:
Firstly, thank you for answering my question Abdul. What is the meaning of do a full wipe in recovery and then flashing the stock rom? I'm using SP Flash Tool to flash the stock rom and my phone is totally dead. It only gets detected in my laptop because I have installed the correct drivers while flashing it. But end up in error 5069.
Click to expand...
Click to collapse
Welcome
Happpy TO help
I mean to say that Clear Cache And reset from recovery if recovery is still open before flashing stock from sp tool
The phone is totally dead. It doesnt even go into recovery. If it could have loaded recovery, i would have easily flashed the rom. Have you understood my situation completely?
Hello,
Did you solve your problem?
I have exactly the same with my phone: Brom Error 5069.
Thank you.
maniche0201 said:
Firstly, thank you for answering my question Abdul. What is the meaning of do a full wipe in recovery and then flashing the stock rom? I'm using SP Flash Tool to flash the stock rom and my phone is totally dead. It only gets detected in my laptop because I have installed the correct drivers while flashing it. But end up in error 5069.
Click to expand...
Click to collapse
i am also facing same kind of problem with different error.....
can you please give me link for the drivers please.............. my phone is not even getting detected