I have been trying to flash a Micromax Canvas HD A116 stock rom on my phone that went dead all of a sudden 1 day. I do not know what the reason was. I tried all the stock roms from v1 to v5. I also tried SPFT v3.something and also SPFT v5.something. My phone gets detected very well on my laptop and on my PC both with Windows 7 and Windows 10 respectively. Every time I have tried to flash the stock rom, it gives error 5069 no space. I have gone through lots of forums online with regards to this topic. However, there is no concrete solution that i could find anywhere. A few reasons that i could find behind this error are emmc crash, larger rom file size, nand flash could not be detected and partition overlap. I do not know what all these mean except larger rom file size. Anyways, i have used all the stock rom files available for my mmx a116. Any help will be highly appreciated. Also to let u know, I'm a newbee trying to learn everything. Thank you in advance.
maniche0201 said:
I have been trying to flash a Micromax Canvas HD A116 stock rom on my phone that went dead all of a sudden 1 day. I do not know what the reason was. I tried all the stock roms from v1 to v5. I also tried SPFT v3.something and also SPFT v5.something. My phone gets detected very well on my laptop and on my PC both with Windows 7 and Windows 10 respectively. Every time I have tried to flash the stock rom, it gives error 5069 no space. I have gone through lots of forums online with regards to this topic. However, there is no concrete solution that i could find anywhere. A few reasons that i could find behind this error are emmc crash, larger rom file size, nand flash could not be detected and partition overlap. I do not know what all these mean except larger rom file size. Anyways, i have used all the stock rom files available for my mmx a116. Any help will be highly appreciated. Also to let u know, I'm a newbee trying to learn everything. Thank you in advance.
Click to expand...
Click to collapse
Do full wipe in recovery then flash stock rom
Firstly, thank you for answering my question Abdul. What is the meaning of do a full wipe in recovery and then flashing the stock rom? I'm using SP Flash Tool to flash the stock rom and my phone is totally dead. It only gets detected in my laptop because I have installed the correct drivers while flashing it. But end up in error 5069.
maniche0201 said:
Firstly, thank you for answering my question Abdul. What is the meaning of do a full wipe in recovery and then flashing the stock rom? I'm using SP Flash Tool to flash the stock rom and my phone is totally dead. It only gets detected in my laptop because I have installed the correct drivers while flashing it. But end up in error 5069.
Click to expand...
Click to collapse
Welcome
Happpy TO help
I mean to say that Clear Cache And reset from recovery if recovery is still open before flashing stock from sp tool
The phone is totally dead. It doesnt even go into recovery. If it could have loaded recovery, i would have easily flashed the rom. Have you understood my situation completely?
Hello,
Did you solve your problem?
I have exactly the same with my phone: Brom Error 5069.
Thank you.
maniche0201 said:
Firstly, thank you for answering my question Abdul. What is the meaning of do a full wipe in recovery and then flashing the stock rom? I'm using SP Flash Tool to flash the stock rom and my phone is totally dead. It only gets detected in my laptop because I have installed the correct drivers while flashing it. But end up in error 5069.
Click to expand...
Click to collapse
i am also facing same kind of problem with different error.....
can you please give me link for the drivers please.............. my phone is not even getting detected
Related
Dear everyone
Not long ago I bought this Lenovo A660. It's a really nice phone, but it's in a boot loop now. I don't know exacly why it got this far but let me explain.
I flashed an Etotalk rom, because I needed Dutch system language, so the rom needed to be multilanguage. The flashing went ok and I used the phone a few days. Then I wanted to do a factory reset to wipe all the account data and apps I installed, because I wanted to give the phone as a birthday present to my best friend.
Right after I started the factory reset it began to reboot over and over again, showing just the factory reset animation (android character with animation and bar). Every 5 secs after it's on it just reboots doing the same thing again.
Things I've tried:
- Searched Android forum's for 3 days
- Tried to boot into CWM recovery Vol UP + Pow, but it will still boot in boot loop.
- I tried to use SP Flash Tool to reflash the recovery. It gave me a green circle and it was downloaded, but it doesn't change anything. Still the same.
- I tried to use SP Flash Tool to reflash the whole Rom, but it gave me an error. Probably because when I connect the phone, the device only shows up for 2-3 secs in the device manager and then disappears, so I think there isn't enough time to flash the whole rom.
- Tried some more button combinations and found out that I can boot into the so called "Factory Mode". Then I connected the phone with USB and it showed a Mediatek preloader device. So I thought I could flash it that way, but SP Flash Tool doesn't respond to it when it's in Factory Mode
- I found some other users with a similar problem, but they didn't describe how they fixed it. Someone mentioned a build-in etotalk recovery, but I don't know the button combination.
The last thing I wanted to say about what I've tried is when I'm in Factory Mode, I can see an ADB device connected in device manager. So I scanned for ADB devices and it does recognize the device. I tried to start recovery mode from ADB with cmd, but it just goes into the boot loop again.
I really hope someone recognizes the problem and is willing to help me. I'm so desperate to get this device working again.
Thanks in advance.
Fixed
I'd like to say that I have fixed the problem myself. After everything seemed hopeless, I forgot one thing. I was able to flash the recovery. I wondered why I would only be able to flash the recovery, well the scatter file I used differs from the other roms I tried to flash. So I used a different scatter file to flash the recovery.
Desperately trying to revive the phone I put the recovery (original scatter file I used to flash the recovery) scatter file in another rom map (rom from a russian site) and replaced the scatter file. Then I loaded it and to my amazement it began flashing everything. The whole rom and recovery. It did not disconnect. It probably put the phone in a wait mode.
Then it rebooted in the factory reset mode again, so I thought it wasn't fixed, but I waited and after the second boot, it booted the rom successfully.
So if anyone else ever has this problem, I'm glad to help you.
Same Problem
chdc chris said:
I'd like to say that I have fixed the problem myself. After everything seemed hopeless, I forgot one thing. I was able to flash the recovery. I wondered why I would only be able to flash the recovery, well the scatter file I used differs from the other roms I tried to flash. So I used a different scatter file to flash the recovery.
Desperately trying to revive the phone I put the recovery (original scatter file I used to flash the recovery) scatter file in another rom map (rom from a russian site) and replaced the scatter file. Then I loaded it and to my amazement it began flashing everything. The whole rom and recovery. It did not disconnect. It probably put the phone in a wait mode.
Then it rebooted in the factory reset mode again, so I thought it wasn't fixed, but I waited and after the second boot, it booted the rom successfully.
So if anyone else ever has this problem, I'm glad to help you.
Click to expand...
Click to collapse
Hi, i have the same problem, can u tell me what scatter file you use? thank you
Reply.
Weezy89 said:
Hi, i have the same problem, can u tell me what scatter file you use? thank you
Click to expand...
Click to collapse
I would like to point out that i'm not and expert and don't actually know what the scatter file does, but it worked this for me. Maybe someone can clarify what the function of the scatter file is? Thanks.
I used the scatter file, which I originally used to flash the recovery. If you haven't tried it yet, you should try to flash a different rom with the first scatter file you used to flash the recovery.
If that doesn't work, you could try this one:
needrom.com/mobile/lenovo-a660-etotalk-mod/
Click on the Recovery link next to the picture and download the file. Then unzip it and copy/paste the scatter file in the folder with your to be flashed rom. That is what I used to fix it.
Hope it works for you. I now, for the first time know how it feels to brick a device after 10 brick-less years. And how it feels to actually fix it when all seems hopeless.
chdc chris said:
I would like to point out that i'm not and expert and don't actually know what the scatter file does, but it worked this for me. Maybe someone can clarify what the function of the scatter file is? Thanks.
I used the scatter file, which I originally used to flash the recovery. If you haven't tried it yet, you should try to flash a different rom with the first scatter file you used to flash the recovery.
If that doesn't work, you could try this one:
needrom.com/mobile/lenovo-a660-etotalk-mod/
Click on the Recovery link next to the picture and download the file. Then unzip it and copy/paste the scatter file in the folder with your to be flashed rom. That is what I used to fix it.
Hope it works for you. I now, for the first time know how it feels to brick a device after 10 brick-less years. And how it feels to actually fix it when all seems hopeless.
Click to expand...
Click to collapse
Helloi,
same problem here after installing etotalk rom and doing factory reset.
I managed to install a new recovery, but the problem is it is chinese. So i dont understand what i see.
Do u have an advise for an english recory except the etotalk one?
Thx
kaupa said:
Helloi,
same problem here after installing etotalk rom and doing factory reset.
I managed to install a new recovery, but the problem is it is chinese. So i dont understand what i see.
Do u have an advise for an english recory except the etotalk one?
Thx
Click to expand...
Click to collapse
Got it!
Used the TWRP_v2.3.1.1_for_A660.zip from Cybermaus!
tHX
kaupa said:
Got it!
Used the TWRP_v2.3.1.1_for_A660.zip from Cybermaus!
tHX
Click to expand...
Click to collapse
Sorry for the late response. I'm glad you fixed it.
please with with my lenovo a660
kaupa said:
Got it!
Used the TWRP_v2.3.1.1_for_A660.zip from Cybermaus!
tHX
Click to expand...
Click to collapse
I have exactly the same problem as you on the same phone. I have tried to flash recovery with flash tool using various scatter files including "TWRP_v2.3.1.1_for_A660.zip" but I keep getting an error that says.
BROM ERROR:S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
Need download all image
[HINT]
DA partial images download is only allowed for the following pre requisite:1.all images have been downloaded to the target before and target could boot up;2. the images layout map on the target is the same as the load that is to be downloaded.
http://forum.xda-developers.com/images/smilies/frown.gif
Somebody please help me out.
Dchemist_Rae said:
I have exactly the same problem as you on the same phone. I have tried to flash recovery with flash tool using various scatter files including "TWRP_v2.3.1.1_for_A660.zip" but I keep getting an error that says.
BROM ERROR:S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
Need download all image
[HINT]
DA partial images download is only allowed for the following pre requisite:1.all images have been downloaded to the target before and target could boot up;2. the images layout map on the target is the same as the load that is to be downloaded.
http://forum.xda-developers.com/images/smilies/frown.gif
Somebody please help me out.
Click to expand...
Click to collapse
I had the same problem and tried all the ways described to fix the problem, but nothing worked.
Then I had the idea to format the whole flash memory to start with a clean system.
So I have chosen the format button in SP Flash Tool and formatted the whole flash memory. After that the A660 was completely dead.
So I have downloaded the Lenovo original ROM for A660 from here. It is the only one that contains all the files to flash the Lenovo A660 completely new. I loaded the scatter file in SP Flash Tool and flashed it. Then the phone booted normally :laugh: and I was able to come in recovery mode to flash Etotalk ROM or restore some backup file.
I have this problem...!
So if anyone else ever has this problem, I'm glad to help you.
I have this problem:
When I turn on the phone, the logo LENOVO comes, and remain for ever...!
I can go to recovery (I tried to flash different recovery-cybermaus,etotalk and TWRP-and tried to flash ROMS from them, but no success, always says cannot mount cache partition and "related" log files).
I cannot go to POW+VolDwn combination, Download/Factory mode? (before the problem I could reach this menu...)
Is like if I cannot access freely the partitions, If I try to mount trough recovery, error!
Any ideas?
Guys , I just got a RAZR Xt910 from my friend. I tried flashing a new ROM though I think it was a bad error flash , I still rebooted the system. Then now its bricked. Cant access my clockworkmod recovery to restore the rom i backed up also. So I tried to so the fastboot process ? I tried to fix it through RSD and downloaded the the necessary XML file but it was an error just for first step. Is this still fixable ? I'm also low in battery. Can't charge the phone since it doesn't have a software or rom. Any help would be great. Been stuck two days
first use factory cable to charge it... and then manually install OS using fastboot
hope it work
agung_gitaris86 said:
first use factory cable to charge it... and then manually install OS using fastboot
hope it work
Click to expand...
Click to collapse
Do I have to charge it first ? Is that why it says can't program ? I has battery still.
Why can't I manually flash a ROM in recovery mode ? I can access the recovery mode just to flash a zip. But all the Roms that I flash is error ? E: signature failed ?
Make sure it's the right rom. You can't flash XT912 roms on XT910. You also can't flash ICS on JB upgraded razrs.
Motorola Factory cable
lawrrtan said:
Guys , I just got a RAZR Xt910 from my friend. I tried flashing a new ROM though I think it was a bad error flash , I still rebooted the system. Then now its bricked. Cant access my clockworkmod recovery to restore the rom i backed up also. So I tried to so the fastboot process ? I tried to fix it through RSD and downloaded the the necessary XML file but it was an error just for first step. Is this still fixable ? I'm also low in battery. Can't charge the phone since it doesn't have a software or rom. Any help would be great. Been stuck two days
Click to expand...
Click to collapse
Hi,
You need a factory cable. It is not easy to solder but if you really want to you can! like me
Just search my posts you will find out the thread about factory cable.
Good luck soldering and flashing your phone.
Happy new lunar year! :laugh:
I was flashing Custom ROM on my "Qmobile Noir A900" and ended up corrupting both ROM and recovery.
And my device is now stuck at a boot loop. Recovery mode is just a white screen and can't seem to go into bootloader mode either.
My Question is.. Is my device totally hard bricked or there's still some hope left?
I am new here and not sure if this is the right section. Sorry
Still no reply?
anAbbasi said:
Still no reply?
Click to expand...
Click to collapse
you can flash stock rom ,i think sold problem
download at http://www.needrom. com/mobile/purexperia-final-rom-for-elife-e3q-mobile-noir-a900/
tunglethanh90 said:
you can flash stock rom ,i think sold problem
Click to expand...
Click to collapse
How do I flash the stock ROM without having access to Recovery Mod and Bootloader MOD?
anAbbasi said:
How do I flash the stock ROM without having access to Recovery Mod and Bootloader MOD?
Click to expand...
Click to collapse
This MTK Chipset ,MTK MT6859
to flash stock rom witch MTK chip set you need
SP_Flash_Tool_5.1343.01.zip
MTK usb driver
Stock firmware
How to flash stock rom
Press and hold volume + ,device install driver port mtk driver
SP_Flash_Tool select scatterMTK...txt from stock firmware and star
Sorry i don't have device to test
tunglethanh90 said:
This MTK Chipset ,MTK MT6859
to flash stock rom witch MTK chip set you need
SP_Flash_Tool_5.1343.01.zip
MTK usb driver
Stock firmware
How to flash stock rom
Press and hold volume + ,device install driver port mtk driver
SP_Flash_Tool select scatterMTK...txt from stock firmware and star
Sorry i don't have device to test
Click to expand...
Click to collapse
Thanks a bunch mate. I did a little research on SP Flash Tool and MTK Chipsets.
I have Formatted whole device using Flash Tool. Now I am going to flash GM Discovery Stock ROM.
Will let you know how it goes.
tunglethanh90 said:
This MTK Chipset ,MTK MT6859
to flash stock rom witch MTK chip set you need
SP_Flash_Tool_5.1343.01.zip
MTK usb driver
Stock firmware
How to flash stock rom
Press and hold volume + ,device install driver port mtk driver
SP_Flash_Tool select scatterMTK...txt from stock firmware and star
Sorry i don't have device to test
Click to expand...
Click to collapse
Well that didn't workout so well. I am unable to FLASH new ROM. I keep getting
BROM ERROR: S_FT_ENABLE_FAIL (4032)
[EMI] Enable DRAM Failed!
Can you suggest any solution for this?
I think I will now try Blu Life Play ROM.
anAbbasi said:
Well that didn't workout so well. I am unable to FLASH new ROM. I keep getting
BROM ERROR: S_FT_ENABLE_FAIL (4032)
[EMI] Enable DRAM Failed!
Can you suggest any solution for this?
I think I will now try Blu Life Play ROM.
Click to expand...
Click to collapse
Rom wrong or please use SP_Flash_Tool_5.1343.01 and select firmware upgrage
tunglethanh90 said:
Rom wrong or please use SP_Flash_Tool_5.1343.01 and select firmware upgrage
Click to expand...
Click to collapse
No luck.
Tried SPFT 5.1352.01.
Used Firmware Upgrade.
still same error.
Used the ROM from this link this time.
http://forum.xda-developers.com/showpost.php?p=43772181&postcount=2
Maybe it's because I formatted whole flash?
anAbbasi said:
No luck.
Tried SPFT 5.1352.01.
Used Firmware Upgrade.
still same error.
Used the ROM from this link this time.
http://forum.xda-developers.com/showpost.php?p=43772181&postcount=2
Maybe it's because I formatted whole flash?
Click to expand...
Click to collapse
Try with here
Select firmware upgrade
Post result
tunglethanh90 said:
Try with here
Select firmware upgrade
Post result
Click to expand...
Click to collapse
Used SP Flash Tool 5.1343.01 this time. (The one you provided)
Same error as before.
I have attached screenshots of the procedure.
Snap1: Files I am flashing.
Snap2: when I connect my device.
Snap3: the error I receive.
And Also, If I use the scatter file for without Preloader, Flash tool crashes after red bar fills.
anAbbasi said:
Used SP Flash Tool 5.1343.01 this time. (The one you provided)
Same error as before.
I have attached screenshots of the procedure.
Snap1: Files I am flashing.
Snap2: when I connect my device.
Snap3: the error I receive.
And Also, If I use the scatter file for without Preloader, Flash tool crashes after red bar fills.
Click to expand...
Click to collapse
Try Flash file http://www.mediafire.com/download/d8ccqumthn9fvbb/A900_140428_103304.rar
tunglethanh90 said:
Try Flash file http://www.mediafire.com/download/d8ccqumthn9fvbb/A900_140428_103304.rar
Click to expand...
Click to collapse
Downloading now. What's different about this file.
P.S. I also tried flashing GIONEE ELIFE E3 stock rom. Same error.
anAbbasi said:
Downloading now. What's different about this file.
P.S. I also tried flashing GIONEE ELIFE E3 stock rom. Same error.
Click to expand...
Click to collapse
you download and flash firmware ,post result
tunglethanh90 said:
you download and flash firmware ,post result
Click to expand...
Click to collapse
Did that...
Device is back on... all thanks to you...
I am now facing two new issues.
1. SIM cards are not being recognized.
2. Secondly, Internal Storage is not accessible.
File Explorer only shows sdcard and Upon connecting to PC, only sdcard is visible. However, I can see internal storage listed in Settings > Storage.
anAbbasi said:
Did that...
Device is back on... all thanks to you...
I am now facing two new issues.
1. SIM cards are not being recognized.
2. Secondly, Internal Storage is not accessible.
File Explorer only shows sdcard and Upon connecting to PC, only sdcard is visible. However, I can see internal storage listed in Settings > Storage.
Click to expand...
Click to collapse
Try Hard reset
tunglethanh90 said:
you download and flash firmware ,post result
Click to expand...
Click to collapse
Solved these issues too.
First did a cache wipe and factory reset. It solved the storage problem but gave me invalid IMEI notification.
Then did a backup restore from default recovery. (I had made a backup prior to all this )
Solved everything.
Thanks a lot man. You saved the day!
anAbbasi said:
Solved these issues too.
First did a cache wipe and factory reset. It solved the storage problem but gave me invalid IMEI notification.
Then did a backup restore from default recovery. (I had made a backup prior to all this )
Solved everything.
Thanks a lot man. You saved the day!
Click to expand...
Click to collapse
Ok , Thks
By the way, where did you get that Backup from?
tunglethanh90 said:
Try Flash file http://www.mediafire.com/download/d8ccqumthn9fvbb/A900_140428_103304.rar
Click to expand...
Click to collapse
Hey,
Though this thread is old and dead now, but i must thank tunglethanh90 for providing the stock Rom (spflash version) of A900. I was having problem with my A900 and found stock rom on needrom site, flashed it and my cell went in to bootloop. I didn't have SPFlash or MTK backup only CWM backup which was no good. I used this ROM provided by tunglethanh90 and i was successful in making my set alive again. Afterwards, i got the problem of invalid IMEI. For that i installed CWM recovery and restored my cwm stock rom backup that i took and saved ealier. All good now but making my set alive again is due to tunglethanh90. Thank You Sir .... So heads up for any guy having QMobile A900 Rom issue, this is what u need to download, dont dl from needrom as its no go.
Regards.
First of all , ihave to say , iam no GURU.
But since not many work on it and cuoco92 seems to be busy at the moment..
Ive had the phone for a year or so and have dealt with most problems that appear..
so pls feel free to ask and ill try to answer.
Any thanks will be appreciated..
there is an upload on my dropbox for the needed tools..will post as soon as it finishes
https://www.dropbox.com/sh/wy8tn4xzfkpi9hn/AACRsiI3RsmTpshwi8aG4Gx5a?dl=0
Spflash tool :working
Lewa rom for spflash:working
Appropriate drivers
Low internal memory after upgrading to MIUI 5.7
After upgrading to the latest MIUI update, the internal memory doesn't seems to be detected properly. I have more that 5 GB left, however it shows that I have 0KB left out of 6.3 MB. I am unable to access my old photos and videos. Whatapp doesn't work properly.
Any solution on how to fix the low internal memory issue on MIUI rom?
anilkm003 said:
After upgrading to the latest MIUI update, the internal memory doesn't seems to be detected properly. I have more that 5 GB left, however it shows that I have 0KB left out of 6.3 MB. I am unable to access my old photos and videos. Whatapp doesn't work properly.
Any solution on how to fix the low internal memory issue on MIUI rom?
Click to expand...
Click to collapse
does the miui work correctly?plz give some link so i can look into it.some screenshot of you phone data if you can.i guess the error is into the partitioning
Sent from my 6043D using XDA Free mobile app
hi sir, i have an error on TWRP i tried installing diff. versions of Recovery on it using Mobile uncle but i cant seem to fix it, im getting "unable to mount " so i am unable full wipe the phone, im guessing i need to reflash the stock rom using spflashtool but i searched everything on the net i cant det stock rom and working walkthrough and working files. any help would be appreciated thank u so much
The official rom is unavailable.
You can find another rom to install through the tools. But it has to be in the right format.i wouldn't change the recovery through mobile uncle. I would recommend changing it through appropriate tool. I'll be uploading a dropbox file with a rom you can use. Wait till tomorrow and you'll be ok.
Sent from my 6043D
Stuff uploaded.
Sent from my 6043D
anilkm003 said:
After upgrading to the latest MIUI update, the internal memory doesn't seems to be detected properly. I have more that 5 GB left, however it shows that I have 0KB left out of 6.3 MB. I am unable to access my old photos and videos. Whatapp doesn't work properly.
Any solution on how to fix the low internal memory issue on MIUI rom?
Click to expand...
Click to collapse
you updated through recovery??
Sent from my 6043D
Thanks bro for uploading files and please bro can you write step by step that how to use sp flash tools....please its emergency reply soon...am waiting ...and I only want to install twrp so please tell me how to install twrp with sp flash tools and one more thing that when I plug usb in pc and mobile it stucks on boot loop so can I use sp tools while in bootlop or I have to remove battery by teradown phone
hi Sir, thanks for uploading helpful files. ill try to flash them today - crossed finger - ill try to flash twrp 1st using spflashtool ill update you for any progress thank you
shubhamx01 said:
Thanks bro for uploading files and please bro can you write step by step that how to use sp flash tools....please its emergency reply soon...am waiting ...and I only want to install twrp so please tell me how to install twrp with sp flash tools and one more thing that when I plug usb in pc and mobile it stucks on boot loop so can I use sp tools while in bootlop or I have to remove battery by teradown phone[/QUOTE
you can get into the bootloader by key combination.to tell you the truth since its always booting up if you keep the up(i think) volume button pressed it will eventually get into recovery.
anyway the sp flash tools is quite easy..just add the scatter file that is provided in my DB and open the rom
all things will go to their appropriate places.the rom works 100%
i used it for a few days until i found my cuoco92 backup (which i like more)
keep me in the loop if something happens
Click to expand...
Click to collapse
Bro sorry am little weak in english and did you mean that should I use sp tools while in recovery or I can use it in while in bootloop??and I am unable to go in bootloader can you give me key combinations ....and I also have custom recovery and aroma manager but I am unable to use otg cable is there any other mathod where is transfer rom into phone and brother you are so helpfull bro may god bless you because in nowdays no one helps others but you are awesome bro thanks very much
i meant using it in bootloop..in the drivers i uploaded there is a driver that you can use even in bootloop and the phone gets recognised as a proper usb device.then sp flash can work fine.if i remember correctly the driver is called bootloader driver
Sent from my 6043D
Bro today I try to install twrp using spflash tools and at down where installing procees ...there I saw procces completes and this is written in red coluur and a message appear that vrom need to install properly what's wrong with that and when I tried to go in recovery there was no twrp please tell me my mistake or I have to download rom to install with flashtools.....and one more thing please how to install drivers propery because I can't found install options in driver rar or extrttact it and driver will install automatically........and please bro last thing can you give me your facebook I'd so I can tell you my problem anytime because I have not pc at home and I have to go city to use pc so please reply as soon as possible
I'll upload a text file with guide
Sent from my 6043D
Thanks bro upload file asap
anilkm003 said:
After upgrading to the latest MIUI update, the internal memory doesn't seems to be detected properly. I have more that 5 GB left, however it shows that I have 0KB left out of 6.3 MB. I am unable to access my old photos and videos. Whatapp doesn't work properly.
Any solution on how to fix the low internal memory issue on MIUI rom?
Click to expand...
Click to collapse
I had the same problem. Seems that the ROM is not recognising all the "virtual" sdcard that we have in our mobile phone.
Anybody knows how to solve it?
Bro I format my whoke flash with sp flash tools and now my phone doesnot booting and not showing anything but carging led in working when coNnecting to charger......now sp flashtools not detecting my phone please tell me how to detect phone with flash tools is ....is I need new drivers or what please help me
Bro I flashed twrp with flash tools suceesfully and when I try to flash rom with twrp I get error like unable to mount data and unable to mount internal storage and i also check internal memory with file manager in twrp but it shows 0 mb internal memory......please please please reply bro please please tell me how to fix it bro please reply at least once
shubhamx01 said:
Bro I flashed twrp with flash tools suceesfully and when I try to flash rom with twrp I get error like unable to mount data and unable to mount internal storage and i also check internal memory with file manager in twrp but it shows 0 mb internal memory......please please please reply bro please please tell me how to fix it bro please reply at least once
Click to expand...
Click to collapse
I think it will be better if you try to install the ROM using Flash Tool instead of TWRP.
Do you have the stock one?
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Thanks for quick reply
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
headlessNick said:
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
Click to expand...
Click to collapse
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
shaijuvjohn said:
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
Click to expand...
Click to collapse
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
headlessNick said:
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Click to expand...
Click to collapse
Try YGDP and flash stock and then restore the backup if available.
When you flash the stock rom it will repalce the twrp also. We can easily install twrp through ygdp. Follow the steps.
1. Select your .cpb file and apply
2. YGDP will unzip the cpb file, path may be C:\YLXZGJ\YGDP\DownFiles\8297W (in my system this is the path, please check after unzipping)
3. Check the unzipped folder contents
4. There will be a file named recovery.img
5. Delete the recovery.img file
6. Copy your twrp recovery to the unzipped folder and rename it to recovery.img
7. Click on start button
8. Remove battery from your phone and connect it to the usb
9. It will detect your phone and start flashing
10. Wait for flashing finishes to 100 %
11. Done. Disconnect phone. You flashed stock rom with twrp recovery
12. Copy the backup to memory card and insert it in phone
12. Insert battery and press power button and volume up key, go to twrp recovery, restore your backup and enjoy
---------- Post added at 12:00 PM ---------- Previous post was at 11:56 AM ----------
headlessNick said:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
Click to expand...
Click to collapse
http://www.needrom.com/wp-content/uploads/2014/10/YGDP_Setup_V3.83_Assembly.zip
Try this one, i am using this one on A311.
You need to have these drivers installed in your system - DA USB VCOM Port, PreLoader USB VCOM (Android)
If you have drivers not installed use the below one from the attachment. :victory:
Thanks - Tying...
headlessNick said:
Thanks - Tying...
Click to expand...
Click to collapse
Thanks a lot guys especially
shaijuvjohn said:
shaijuvjohn
Click to expand...
Click to collapse
, I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
headlessNick said:
Thanks a lot guys especially , I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
Click to expand...
Click to collapse
Yup because i already went through all these situations and i know the difficulties. That is why i gave you each steps. Always Happy to HELP. :victory:
didnt worked
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
I hv tried to installed from ygdp stock rom but it stopped in between. The process wont complete, plz help me if u can
Micromax q391
My Micromax canvas q391 not working its just stuck on the Micromax logo n I'm not even able to access the recovery mode n does not have the backup of rom
What can I do to start it up please help
Even I tried to Flash with YGDP but no use. My mobile is not stable suddenly and automatically it disconnects from my system even connected with USB Cable.
..
WHen I open the link a page comes up saying " Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
"
What should I do....
same problrm faced
headlessNick said:
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Click to expand...
Click to collapse
i had faced same problem ..
but stay calm .. just download ypdp flash tool .. download stock rom and flash it using ypdp tool ... remember while flashing remove the battery otherwise it will not detect the phone , as my was not detected .. but as soon i removed the battery , it flashed the rom in couple of minutes . and after flashing remember to flash a custom rom as the stock rom gets corrupted causing these issues .. installed darkeness redefined rom and it is woking extremely fast , best rom in my opinion . choise is upon you ,
Hope my message helped you , for any more questions do ask.
boot loop
i have the same problem boot loop but im not able to flash becoz my micromax canvas nitro a311 disconnecting continuously on lap im not able to open recovery mode also help:fingers-crossed: