Related
Hello guys.
We are grateful because ASUS have included so many useful gimmicky bloatwares in the stock ROM on our device. One of them was AudioWizard. As a groovy sound lover, I didn't found myself satisfy with AudioWizard's sound modes. Because of that, I come here to guide you on how to install ViPER4Android FX properly on your device as I have tried several methods and tempting many errors during installing the driver.
DISCLAIMER: DO WITH YOUR OWN RISK
Do a full nandroid backup! I don't want to take any responsibility if something unexpected happens.
Tested & working fine on my ZE550KL.
I think it should works on any ASUS Zenfone 2 Laser devices as long as you are on stock Lollipop ROM.
Not supported on CyanogenMod 13.0 ROM (Android 6.0.1 Marshmallow).
Known issues:
-AudioWizard isn't working. (You get a payback, dude! It maybe conflict or the V4A broke down the AudioWizard. But you will enjoy a great sound effect better than AudioWizard. Don't cry.)
-FM radio isn't working. (If you think this is very important for you so don't flash.)
-Sound recorder isn't working.
What do you need on your device?
...a working custom recovery such as TWRP or CWM
...a working root access
...BusyBox installed properly
Download the required file (ViPER4Android lollipop.zip) from the link below.
https://drive.google.com/file/d/0B9vjPTwrSocDYzNlTXVrUG44Mms/view
Or download from the attached file (ViPER4Android lollipop.zip) below.
Flash it through your custom recovery.
If you want to use only ViPER4Android FX as a global audio effect, follow Normal mode. But if you want existing audio effects to work, follow Compatible mode.
Enjoy your new audio effect!
Credits & special thanks are given to:
@zhuhang the creator & developer of ViPER4Android FX
@asett3 for sharing the file with me
hi thank you i've been looking for this but i think i don't have acces to the file
Hey you all who are requested, sorry for the inconvenience. Now you can access the file freely.
update
Working perfectly in ZE500KG im sorry i wrong flash it non in twrp
FM is not working after flash.
FM and Sound Record is not working after flash
I didn't notice that FM radio isn't working when I'm still using V4A on stock Lollipop ROM. But my recording app is working well. The most thing I have noticed is AudioWizard not working. It maybe broken down by the V4A.
Sr. M Huzaifah
Bugs shown in the Stock Rom, were these:
- FM Radio does not work, no sound.
- It is not possible to record a phone conversation, because the Sound Record does not work.
Can anyone correcting these bugs?
Thank you
Anybody who are use this V4A can prove that the sound recorder isn't work?
M Huzaifah said:
Anybody who are use this V4A can prove that the sound recorder isn't work?
Click to expand...
Click to collapse
It does not work sound recorder and FM radio.
Is to make it work?
Mandrakerj said:
It does not work sound recorder and FM radio.
Is to make it work?
Click to expand...
Click to collapse
If it is really won't work and you want to make it work again, you need to flash the full firmware. Or you can revert/restore back if you have made a full nandroid backup. Don't use this V4A unless you think the issues isn't disturb your daily driver.
On MM is working if you install it normaly. Just download Viper4Android and install the driver, if is not working try to open the equalizer using your music player. If you use stock music player to open the equalizer it will open the stock one, try with musixmatch ( go to now playing and pres the 3 dots and open equalizer ). Is working with stock equalizer and Radio, Call Recordind is working
i flashed ViperAudio 4.7.1 zip using twrp, it works well without problem on both lollipop and marshmallow. i don't know if it isnt the same with viper4android but the UI is the same, so.. i got it from here http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075 i have been using this on several devices already, seems work flawlessly so far
feinz91 said:
i flashed ViperAudio 4.7.1 zip using twrp, it works well without problem on both lollipop and marshmallow. i don't know if it isnt the same with viper4android but the UI is the same, so.. i got it from here http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075 i have been using this on several devices already, seems work flawlessly so far
Click to expand...
Click to collapse
I confirm it. ViperAudio 4.7.1 working perfectly on ZE500KL with Marshmallow (including sound recorder and FM radio).
do you can make it for the marshmalow
mohamedelkholy said:
do you can make it for the marshmalow
Click to expand...
Click to collapse
Redirect here... http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Work both on LP & MM with no issues at all.
M Huzaifah said:
Redirect here... http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Work both on LP & MM with no issues at all.
Click to expand...
Click to collapse
i should to download any one
mohamedelkholy said:
i should to download any one
Click to expand...
Click to collapse
Pick one that's suits you.
Tanks
i want to flash stock audio wizard
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
MaxtremePL said:
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
Click to expand...
Click to collapse
Can you share the audio mods you used?? Thanks
---------- Post added at 10:43 PM ---------- Previous post was at 10:42 PM ----------
shakaraja said:
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
Click to expand...
Click to collapse
Thanks for the detailed guide... Will test now thanks
anees167 said:
Can you share the audio mods you used?? Thanks
Click to expand...
Click to collapse
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Did you disable boot to stock recovery and also you may have to fastboot recovery
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
I have distorted sound using the v4a. How fix it?
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
It dosent work getting distorted sound
viper4android install than sound break problem is fix?
mohamm3edadam said:
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Click to expand...
Click to collapse
You need the TWRP version meant for H2OS. You will find it in any H2OS based ROM thread.
Skick3 said:
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
Click to expand...
Click to collapse
Yes, there are options. Find gain controls and tweak them to your preference.
ras_fyah said:
I have distorted sound using the v4a. How fix it?
Click to expand...
Click to collapse
Akhil701 said:
It dosent work getting distorted sound
Click to expand...
Click to collapse
If you still are on OOS 2.2.x then V4A will not work. This fix is specifically meant for OOS 3.
If you are on OOS 3, then try reflashing OOS 3 with a clean flash. This might fix it, but only if you are on OOS 3.
mvha said:
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Click to expand...
Click to collapse
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
locxFIN said:
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
Click to expand...
Click to collapse
Search XDA Forums for V4A profiles and use a preferred profile according to your type of music.
whwhdtk5689 said:
viper4android install than sound break problem is fix?
Click to expand...
Click to collapse
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
arch_geek said:
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
Click to expand...
Click to collapse
yes. i'm oos 3.0 MM.
wow i'm install now viper4android !
thank you !
arch_geek said:
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
Click to expand...
Click to collapse
You've Got a Point. I have installed wrong version of V4A. Now working all. Thank You
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
shakaraja said:
Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Click to expand...
Click to collapse
Hm i had the same problem. Driver Status was false.
My Workaround was i clicked in Viper many Menus up an down. Lock Effect Mode disable to speaker. UI Setting to Expert and suddenly the Driver Status was True.
No cleaning data. I didn´t installed google play music.
With Viper4Anroid on OO2 Oxygen3 the sound are definitly noiser and better. (Master Gain (Limiter) / Output Gaine -20db)
Thx for the hint with these app.
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
How to root your phone. You find it in these guide
> http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
MaxtremePL said:
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
Click to expand...
Click to collapse
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
If you flashed OOS 3, it is highly likely that the build was not a pre-rooted build. To root follow this guide at this link :
http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
anees167 said:
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
Click to expand...
Click to collapse
Actually V4A can be tweaked to sound better than MaxxAudio. Try XtremeMUSIC mod by androidexpert35. It includes V4A as an addon.
Link to the above mod is here: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
&roid said:
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
Click to expand...
Click to collapse
Try XtremeMUSIC mod. Link: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
http://forum.xda-developers.com/devdb/project/dl/?id=13100
How to install:
- Make a backup
Copy the zip " dolby atmos "in your SdCard
- Reboot in recovery mode
- Install "dolby atmos " .zip
wipe dalvik cache and restart the device
- Done!
Orginal post
here..
http://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
https://www.youtube.com/watch?v=aM9g4r9QUsM
and watch ..listen amazing sound
https://www.youtube.com/watch?v=qiuKNdIOu8Q
gavsi said:
https://www.youtube.com/watch?v=qiuKNdIOu8Q
Click to expand...
Click to collapse
I use viper.Any conflict with dolby atmos?
Thanks
But your video ...Mate.....
Maybe this better:
https://www.youtube.com/watch?v=-asyYy_RlMY
Any conflict with dolby atmos?
Click to expand...
Click to collapse
ı have no idea ..but this mod especially game and movie
ı guess
kabirjedi said:
I use viper.Any conflict with dolby atmos?
Thanks
But your video ...Mate.....
Maybe this better:
Click to expand...
Click to collapse
gavsi said:
Any conflict with dolby atmos?
ı have no idea ..but this mod especially game and movie
ı guess
Click to expand...
Click to collapse
I'm using Viper too but in this version Dolby Atmos already came with it
ViPERAtmos 5.5 Sony Beats Edition
http://forum.xda-developers.com/showthread.php?t=3289075
How it works? I see the ViperAtmos post but I dont understand which version I need to flash and how it works. Can you help me? Just need to know which version I need to flash.
EDIT: I am on stock 6.0 based!
Vipery said:
How it works? I see the ViperAtmos post but I dont understand which version I need to flash and how it works. Can you help me? Just need to know which version I need to flash.
EDIT: I am on stock 6.0 based!
Click to expand...
Click to collapse
Look one post above yours ☝
Sent from my LG G4
welder73 said:
Look one post above yours
Sent from my LG G4
Click to expand...
Click to collapse
I am on stock, i mean which .zip i need to flash? "ViPERAtmos 5.5 Sony Beats Edition.zip" or "ViPERAtmos 4.8 Sony Beats Edition.zip" there are those two packages.
Vipery said:
I am on stock, i mean which .zip i need to flash? "ViPERAtmos 5.5 Sony Beats Edition.zip" or "ViPERAtmos 4.8 Sony Beats Edition.zip" there are those two packages.
Click to expand...
Click to collapse
Look again in my post...5.5...
Does this mode really ehance audio to where you will notice a difference?
Sent from my LG-H811 using XDA-Developers mobile app
LG G4 H815 v20G
Hi,
I am new here. But i find this Thread very intresting. Does anyone flash this on a LGG4 with version v20g???
And the second point is, what happend with the original state? When i used xposed a long time ago it said modified so i had to go back on stock for updating from v20d to v20g.
There are many rumors about the N version for the lgg4 so i dont want to miss the update
NardVa said:
Does this mode really ehance audio to where you will notice a difference?
Sent from my LG-H811 using XDA-Developers mobile app
Click to expand...
Click to collapse
It works fine with my Android 7.1 custom rom.
---------- Post added at 11:48 AM ---------- Previous post was at 11:46 AM ----------
vamplord said:
Hi,
I am new here. But i find this Thread very intresting. Does anyone flash this on a LGG4 with version v20g???
And the second point is, what happend with the original state? When i used xposed a long time ago it said modified so i had to go back on stock for updating from v20d to v20g.
There are many rumors about the N version for the lgg4 so i dont want to miss the update
Click to expand...
Click to collapse
Works fine with Android N custom rom.
Wow this is something. For those who don't see a difference you need to disable the music player's equalizer. (I'm on custom rom 7.1 as well)
Emin3ms said:
Wow this is something. For those who don't see a difference you need to disable the music player's equalizer. (I'm on custom rom 7.1 as well)
Click to expand...
Click to collapse
I have ROM 7.1.1 aicp and dolby working good?
Everyone knows, or should know viper4android. It is the best possible sound mod. However it is not easy to install on stock rooted ROMs, due to SElinux.
There are lots of flashable zips to allow this. However, the latest bootloader, CQAV, seems to have an improved security and they're stopped working. The only one that allowed installation is this file, but it breaks the dialer and prevents phone calls. So, I took this zip file and customised it to use viper4android 2.3.4 (better version) while keeping G900f dialer functions and sound quality. It works on system and system-less rooted systems (recognizes automatically the correct installation to apply).
Procedure:
Flash file
Install best quality driver in viper4android
Reboot. If status abnormal, reboot again.
Enjoy!
Can it flash on MM g900h?
It should work, as not depending on the processor type. If it causes issues, simply reflashing the ROM will erase it. Or even better backup your system partition before flashing.
Will this work with S5 SMG900F using cr droid android 7.1.2
Not Sure
ilija simeunovic said:
Will this work with S5 SMG900F using cr droid android 7.1.2
Click to expand...
Click to collapse
This Version of Viper worked god for me on my g900f on Marshmallow based Roms. (Like xXx No Limits 6.1 and RR-M)
I´ve flashed this Version of Viper for Android 7.x.x Roms and it works fine, after you flash this file via TWRP. I am on RR-N 5.8.4 now)
No Reboot necesary after instal the zip.Driver is already installed.
Greetz!
Triple [- said:
[-] [-];73727893]This Version of Viper worked god for me on my g900f on Marshmallow based Roms. (Like xXx No Limits 6.1 and RR-M)
I´ve flashed this Version of Viper for Android 7.x.x Roms and it works fine, after you flash this file via TWRP. I am on RR-N 5.8.4 now)
No Reboot necesary after instal the zip.Driver is already installed.
Greetz!
Click to expand...
Click to collapse
Hi, thanks for the reply. I have an other question:
How to set this mod to default after flashing? Do i need to set as default and where, or do i need to remove audio FX?
Sent from my klte using XDA Labs
Dear Friends,
Viper4Android Fx doesn't work with any custom ROM.( Busy box installed ) & edited file to . bak. Still doesn't work. Any suggestion?
I suggest using ARISE Sound Systems, V4A from their package works like a charm. Only difficulty may be installation configuration, but you can use older versions with aroma installer.
resutatto said:
I suggest using ARISE Sound Systems, V4A from their package works like a charm. Only difficulty may be installation configuration, but you can use older versions with aroma installer.
Click to expand...
Click to collapse
Thanks for the suggestion. Long back i used Arise sound system in S7edge. Downloaded Arise dueteronomy aroma but it doesnt work with custom rom (shows drivers installed but no sound difference).Tried in fulmics& it works. Any idea in which custom rom it works without any problem?
Have you tried latest Magnum Opus then? Takes a bit to manually config installation file though.
Honestly I'm using custom stock ROM on my G5, mainly for LG's camera app. On the other devices I used AOSP roms like LineageOS and ARISE was working fine, but I don't have any experience with that on AOSP LG G5 roms, should work too I guess.
resutatto said:
Have you tried latest Magnum Opus then? Takes a bit to manually config installation file though.
Honestly I'm using custom stock ROM on my G5, mainly for LG's camera app. On the other devices I used AOSP roms like LineageOS and ARISE was working fine, but I don't have any experience with that on AOSP LG G5 roms, should work too I guess.
Click to expand...
Click to collapse
First i tried latest magnus opum but i got flashing error with cr droid & so downloaded old version.Will try it later with other roms. Thanks for your reply.
vignesh_may28 said:
First i tried latest magnus opum but i got flashing error with cr droid & so downloaded old version.Will try it later with other roms. Thanks for your reply.
Click to expand...
Click to collapse
Just to be sure, have you configured installation file and placed it on your sdcard before flashing Magnum Opus?
One more thing that comes to mind; sometimes, when v4a wasn't working, common thing to do was deleting audio_effects.conf, not backing it up at and then reflashing v4a package.
Other than that I can't help you, sorry. Perhaps you should look in the rom thread if issue was mentioned or ask by yourself.
I had this problem myself and downloaded like a dozen different install packages of viper before one finally stuck and operated. Keep trying and I'm sure you'll find one that does the trick. Pretty sure the one that worked on my G5 was actually put together for the V20.
Thanks a lot for your suggestions. Tried once today & it works like a charm with Crdroid 2.4. Have a nice day .
vignesh_may28 said:
Thanks for the suggestion. Long back i used Arise sound system in S7edge. Downloaded Arise dueteronomy aroma but it doesnt work with custom rom (shows drivers installed but no sound difference).Tried in fulmics& it works. Any idea in which custom rom it works without any problem?
Click to expand...
Click to collapse
vignesh_may28 said:
Thanks a lot for your suggestions. Tried once today & it works like a charm with Crdroid 2.4. Have a nice day .
Click to expand...
Click to collapse
Well ... To install A.R.I.S.E you need proper working root and busybox as it is needed for Viper driver installation ... If both are working properly you will not be prompted to install driver otherwise you will see the driver installation prompt and following error ...
In FULMICS it works because of the in-built root and busybox ...
U can generally use A.R.I.S.E Deuteronomy 2.4 (download from androidfilehost). The installation is as minimal as possible .. only libraries and Viper4Arise without needing to configure anything yourself ... and it works like a charm in all properly rooted roms ...
If you use custom kernels (Asgard for Fulmics, and Speedy Kernel for LOS based roms) be sure to flash Magisk Root or SuperSU ... !!
Hope it helps !
N1ko5zAN said:
Well ... To install A.R.I.S.E you need proper working root and busybox as it is needed for Viper driver installation ... If both are working properly you will not be prompted to install driver otherwise you will see the driver installation prompt and following error ...
In FULMICS it works because of the in-built root and busybox ...
U can generally use A.R.I.S.E Deuteronomy 2.4 (download from androidfilehost). The installation is as minimal as possible .. only libraries and Viper4Arise without needing to configure anything yourself ... and it works like a charm in all properly rooted roms ...
If you use custom kernels (Asgard for Fulmics, and Speedy Kernel for LOS based roms) be sure to flash Magisk Root or SuperSU ... !!
Hope it helps !
Click to expand...
Click to collapse
Earlier it didn't work with busybox installed . Now it works without busybox ( Crdroid Rom)
vignesh_may28 said:
Earlier it didn't work with busybox installed . Now it works without busybox ( Crdroid Rom)
Click to expand...
Click to collapse
That is kinda weird .. but since it is working ...
N1ko5zAN said:
That is kinda weird .. but since it is working ...
Click to expand...
Click to collapse
:laugh:
i'm have crDroid installed, and noticed there is stock app AudioFX but it giving not realy much settings, and, i decided to google if this will work, i have done reaading this, can some one help me with installing some musicFX module?