Hello. Has anybody any idea if its possible to downgrade the g5 from nougat to MM? I really dont like it. Im wondering if it is possible and how? KDZ file for my phone and lgup?
There is automatic update are came in few month just wait some time.
If your variant is H860 go here >> https://forum.xda-developers.com/lg-g5/how-to/guide-downgrade-to-mm-n-t3523999
bluerain28 said:
If your variant is H860 go here >> https://forum.xda-developers.com/lg-g5/how-to/guide-downgrade-to-mm-n-t3523999
Click to expand...
Click to collapse
my variant is h850, but now i got bigger problems...i tried installing a kdz, it failed and now i have no os. i downloaded a lot of kdz but none of them work..help me
same, i downloaded a kdz , rolled back with lg up , that appeared to work., but when my phone comes on and i enter my power up pin its says its incorrect , WTF!!! Tried LGUP to put nougat back on hoping it would help but LG up just crashed every single time i attempt to do anything with phone. Aint got a clue what to do now
You guys try asking autoprime about this?
Sent from my LGE LG-H830 using XDA Labs
dssherwin said:
same, i downloaded a kdz , rolled back with lg up , that appeared to work., but when my phone comes on and i enter my power up pin its says its incorrect , WTF!!! Tried LGUP to put nougat back on hoping it would help but LG up just crashed every single time i attempt to do anything with phone. Aint got a clue what to do now
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295 donwload uppercut and lgup from here. unzip the uppercut, run it, if it gives you an error that it cant find it in users...roaming bla bla, just copy uppercut in the folder the program wants and it will run fine. then after pluging your device in, open uppercut, select your kdz file and chose upgrade not forbish or fota upgrade or something. i however had the h85020a variant of the firmware. there is 10c and 10e or something. anyway, if u know thats your model just go for it as i said earlier.
Related
I own a LG-P765
I used LG's software updater and it decided to put on a useless Chinese version of android 4.0.4 with no play store
Need help putting it back
I tried hard resetting and it didnt help
I tried flashing with KDZ but the program kept on crashing
Need help BADLY!!!!!!!!!!
manniefabian said:
I own a LG-P768
I used LG's software updater and it decided to put on a useless Chinese version of android 4.0.4 with no play store
Need help putting it back
I tried hard resetting and it didnt help
I tried flashing with KDZ but the program kept on crashing
Need help BADLY!!!!!!!!!!
Click to expand...
Click to collapse
Try to recovery your phone by LG mobile support tool
1. Download LG mobile support tools from LG web site. http://www.lg.com/us/support-mobile/lg-P769
2. Boot your phone to SW upload mode
3. Start LG mobile support tool.
4. Connect your phone with usb cable. LG mobile support should detect your phone model. If not please reinstall LG usb drivers.
5. In LG mobile support tools, select "Customer support" > "Recover phone"
4. New dialog popup ask for IMEI or S/N. Your IMEI should already fill in textbox just click first button.
5. Wait for LG flash program to load kdz from their server and flash your phone. It should work.
Just put on the Chinese android!!!
All that did was put on the chinese android i need a way to flash it
manniefabian said:
I tried flashing with KDZ but the program kept on crashing
Click to expand...
Click to collapse
What do you mean "crashing"? What excatly happens?
Once i enter in the correct KDZ file i press start it says unpacking then the prgaram stops working
I have tried this on other computers also
If u can give me a step by step version on how to use the KDZ updater program that would help
My phone is the LG P765 or P760 running Android 4.0.4
anirion said:
What do you mean "crashing"? What excatly happens?
Click to expand...
Click to collapse
manniefabian said:
Once i enter in the correct KDZ file i press start it says unpacking then the prgaram stops working
I have tried this on other computers also
If u can give me a step by step version on how to use the KDZ updater program that would help
My phone is the LG P765 or P760 running Android 4.0.4
Click to expand...
Click to collapse
Step by step you find here: http://forum.xda-developers.com/showthread.php?p=36351786
You can also try to download again KDZ file, maybe file which you try to use is corrupted.
anirion said:
Step by step you find here: http://forum.xda-developers.com/showthread.php?p=36351786
You can also try to download again KDZ file, maybe file which you try to use is corrupted.
Click to expand...
Click to collapse
Thanks im gonna try it if it doesn't work is there any other way?
There is an update from 28/06/16 , when it says update the phone will restart but just go into recovery but not install , does anyone have the solution for this?
WARKRIME said:
There is an update from 28/06/16 , when it says update the phone will restart but just go into recovery but not install , does anyone have the solution for this?
Click to expand...
Click to collapse
You cannot flash a ota if you have root and moreover if you have twrp.
So if you want to update you have to manually flash the firmware via lgup.
Sent from my LG G5 using XDA Labs
tried it via USB Through LG Bridge but it gets to 80% then says unable to update?
WARKRIME said:
tried it via USB Through LG Bridge but it gets to 80% then says unable to update?
Click to expand...
Click to collapse
Strange, tried with lgup as i suggested?
Sent from my LG G5 using XDA Labs
LGUP not recognizing my model ? "you have to select a known model, please" is this only for the G4 And LG Bridge for G5?
:Edit , didn't have the right .msi downloaded with it , recognized now will post back results
LGup is working with the G5. Just remember to boot with vol+ button pressed.
I have a LG V10 F600L running on Android 5.1.1.
I bought this phone used and when I bought it, it was already rooted. I don't have any experience with this sort of thing and I don't really want my finances to be burdened with replacing a phone if I accidentally brick it.
I know its a lot to request but can anyone take the time tell me how exactly I should proceed? What steps should I take? what guides I should follow? etc.
I have literally never touched the technical aspects of a phone's OS and firmware, etc. in my life before. But I really do want to update and will follow all instructions and precautions.
Thank you in advance
Sovereign31 said:
I have a LG V10 F600L running on Android 5.1.1.
I bought this phone used and when I bought it, it was already rooted. I don't have any experience with this sort of thing and I don't really want my finances to be burdened with replacing a phone if I accidentally brick it.
I know its a lot to request but can anyone take the time tell me how exactly I should proceed? What steps should I take? what guides I should follow? etc.
I have literally never touched the technical aspects of a phone's OS and firmware, etc. in my life before. But I really do want to update and will follow all instructions and precautions.
Thank you in advance
Click to expand...
Click to collapse
theres 3 ways i beleive . ive only used KDZ file buton G4.
first one is to go to settings/ then go to about phone in there check for software update.. make sure you have full battery. and check for updates.. if you find something calle V30 thats nougat if its V20 its MM. and V10 its LP.
the other its to download LG bridge.. you connect your phone and i beleive it should scan for updates or you manually find the update software somewhere .. never used this program..
the other is to manually do it. download the KDZ for you F600L youll get a zip file... then unzip it.
then search for LGUP. follow instructinos to install its only 2 files.. install .dll and program i believe..
then turn off phone.. back up all needed files or pictures
once phone turned off pres vol up.. then insert usb cable.
open LGUP and upgrade should be ticked.. theres a box there and i think bin is ticked.. un tick it... next to it 3 dots click on that and it should allow you to browse for file .. find the KDZ you downloaded and selected the unzipped file. once selected you should see the name of
KDZ there.. now close program... then open it again.. this time tick refurbished.. and click start.. let it finish takes like 15 mins or less.
KDZ files choose the correct variant for your phone.. https://forum.xda-developers.com/lg-v10/general/lg-v10-f600l-f600k-f600s-android-n-7-0-t3611676
ive only used the LGUP method..
good luck
is there any real danger of bricking my phone?
Also, how do I do it so that I can root my phone too?
Easy update using LG Bridge after backing up. Didn't need backup as update left everything ok (incl. Microsoft launcher). Now V20a-TWN-XX.
Allgood then, but struggling to notice a difference. Maybe a little quicker!
Nope for 870DS Indonesia
Cheers
RooBG said:
Easy update using LG Bridge after backing up. Didn't need backup as update left everything ok (incl. Microsoft launcher). Now V20a-TWN-XX.
Allgood then, but struggling to notice a difference. Maybe a little quicker!
Click to expand...
Click to collapse
Can we flash it on indian DS model?
Sent from my LG-H870DS using Tapatalk
Any others recived oreo ?
Now V20a-HKG-XX.
mohammadstr said:
Any others recived oreo ?
Click to expand...
Click to collapse
My H870DS from TWN (actual software version V10m-TWN-XX) shows no update OTA, but is now downloading a new update in LG Bridge.
ppp10 said:
My H870DS from TWN (actual software version V10m-TWN-XX) shows no update OTA, but is now downloading a new update in LG Bridge.
Click to expand...
Click to collapse
same for me. Only update with LG Bridge :/
H870DS SEA
Any news for H870DSU lg g6+
i need kdz can some one upload it for me?
mahmoudxcom said:
Any news for H870DSU lg g6+
Click to expand...
Click to collapse
It's out too ..
U can flash it by lgup ..
Check this one https://www.mylgphones.com/lg-g6-h8...d-oreo-8-0-update-in-hongkong-and-taiwan.html
---------- Post added at 07:20 AM ---------- Previous post was at 07:16 AM ----------
mohammadstr said:
i need kdz can some one upload it for me?
Click to expand...
Click to collapse
https://www.mylgphones.com/lg-g6-h8...d-oreo-8-0-update-in-hongkong-and-taiwan.html
not working at all. website doesnt give any link, and it seems like its a paid service
They could add V30 quad dac extra feature on our G6.?
sagor1 said:
They could add V30 quad dac extra feature on our G6.
Click to expand...
Click to collapse
See...if they add features from V30 no one will buy V30 they dont add them beacause of they want sell V30 product 1.5x price for that features without them V30 is no more than G6 only different bitween them is snapdragon 835 ...821 and some feauters
mohammadstr said:
See...if they add features from V30 no one will buy V30 they dont add them beacause of they want sell V30 product 1.5x price for that features without them V30 is no more than G6 only different bitween them is snapdragon 835 ...821 and some feauters
Click to expand...
Click to collapse
Same thing goes for s7 edge & s8.
But Samsung add every software features from s8 to s7 edge on oreo.
They even frequently update their built in apps.
sanzharis said:
not working at all. website doesnt give any link, and it seems like its a paid service
Click to expand...
Click to collapse
In this site site you can not only see any update to H870DS, as well as to download the installation package:
https://lg-firmwares.com/lg-h870ds-firmwares/
Updated mine a while ago. So far so good!
H870DS HKG-XX v20a
No ota, via LG Bridge
Updated my H870DS-TWN a few days ago, clean install via LG bridge.
No problems and nothing really extraordinary, except maybe the ability to hide the nav keys, which is less useful than I used to think. When hidden, you have to make one extra move to bring them back. Using a third party gesture control app solves the problem.
Has anyone noticed any change in battery performance or idle standby drain since updating their H870DS to Oreo? Additionally, has anyone found any problems or issues on this model since updating? I also have Taiwan version and want to check that the update is stable before I pull the trigger on it.
Guys, need help !!!
I have tried to install SEA oreo version on Indian phone via LGUP... Flash was successful (100%) but it got stuck on LG Logo..
Procedure followed for H870DS (IND)
1. Downloaded SEA Oreo KDZ File (H870DS20a_00_OPEN_SG_DS_OP_0518.kdz)
2. Installed LGUP... Made new Common folder inside C/Prog file/LG/Model
3. Extracted DLL file from KDZ & renamed it LGUP_Common.dll and kept in Common folder
4. Entered in download mode
5. Opened LGUP.. selected KDZ and Upgrade..
6. Boom.. 100% completed.. it has shown that phone is rebooting..
7. But then it got stuck on LG Screen
I cant access recovery now
I can open Hard Reset option (Vol down+Power) only.. Made hard reset but no use
I cant enter in download mode
I dont know if it is charging or not
It is not even switching off by pressing power button for long time
Pl help me...
swasha123 said:
Guys, need help !!!
I have tried to install SEA oreo version on Indian phone via LGUP... Flash was successful (100%) but it got stuck on LG Logo..
Procedure followed for H870DS (IND)
1. Downloaded SEA Oreo KDZ File (H870DS20a_00_OPEN_SG_DS_OP_0518.kdz)
2. Installed LGUP... Made new Common folder inside C/Prog file/LG/Model
3. Extracted DLL file from KDZ & renamed it LGUP_Common.dll and kept in Common folder
4. Entered in download mode
5. Opened LGUP.. selected KDZ and Upgrade..
6. Boom.. 100% completed.. it has shown that phone is rebooting..
7. But then it got stuck on LG Screen
I cant access recovery now
I can open Hard Reset option (Vol down+Power) only.. Made hard reset but no use
I cant enter in download mode
I dont know if it is charging or not
It is not even switching off by pressing power button for long time
Pl help me...
Click to expand...
Click to collapse
I had the same issue while using (with lg up and uc) Singapore rom on my indian lg DS last night and managed to recover successfully.
I made it to switch to download mode immediately after resetting while in stuck welcome screen.
Steps.
1. Keep pressing power + volume d to reboot.
2. Immediately press volume up while the usb is inserted and your official lg bridge running in your laptop and set to flash recovery mode.
3. LG bridge should recognise and start downloading the latest firmware from server and flash on your phone.
4. You may need to do factory reset after a successful flash n reboot because it might throw exceptions after booting (mine had from the process settings).
Section 1 Covers how to install pie on H87320i.
Section 2 Covers How to rollback from H87329a to H87320I
Section 1
Download FOTA file
v29a
https://drive.google.com/file/d/1BNI2Cvuk1eX4ocx2S6_YnbqNUARgIbts/view
v30b
https://mega.nz/#!e9cQ0QTZ!vpCXt1eYUUpTo2NJ-0t8I6SiIxt6qXbTOjupsHIzB9s
LG UP
https://www.mylgphones.com/download-lg-up-software (use 1.116 non pacteched lab version)
Uppercut
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Extract .zip file of LG UP
Conect phone to pc (MTP) and enable usb debugging (if don't know how search in internet)
Install LG UP after installation
Extract Upper Cut don't forget to turn off your antivirus before you extract
Run Uppercut.exe. LG UP will run
Now in you will see some buttons select FOTA
A little bit lower you will see File Path and under it you will see probably an .up file, press on it after that press on 3 dots that just apear and find Update file you download (.up)
Before pressing start unlock your phone and stay with display turned on
Now, the last press start, after like 30s-1m on display should apear FOTA Upgrade and after should turn off and start upgrading.
At the end it will bootloop like a minute, it is normal, after that it will start and finish the update
Congrats! You got the Pie?
NOTE:
LG G6 USB drivers must b installed
If you have Lg bridge Install, it might interfere while flashing using Lg UP
Section 2
How to roll back from pie
check post below
https://forum.xda-developers.com/showpost.php?p=80464669&postcount=46
Credits:
f.h7 for rollback tutorial
v30b link by umaga2012
Some tutorial points by vaniok56 (Reddit)
harib12 said:
Download FOTA file
https://drive.google.com/file/d/1BNI2Cvuk1eX4ocx2S6_YnbqNUARgIbts/view
LG UP
https://www.mylgphones.com/download-lg-up-software (use 1.116 non pacteched lab version)
Uppercut
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Extract .zip file of LG UP
Conect phone to pc (MTP) and enable usb debugging (if don't know how search in internet)
Install LG UP after installation
Extract Upper Cut don't forget to turn off your antivirus before you extract
Run Uppercut.exe. LG UP will run
Now in you will see some buttons select FOTA
A little bit lower you will see File Path and under it you will see probably an .up file, press on it after that press on 3 dots that just apear and find Update file you download (.up)
Before pressing start unlock your phone and stay with display turned on
Now, the last press start, after like 30s-1m on display should apear FOTA Upgrade and after should turn off and start upgrading.
At the end it will bootloop like a minute, it is normal, after that it will start and finish the update
Congrats! You got the Pie?
NOTE:
LG G6 USB drivers must b installed
If you have Lg bridge Install, it might interfere while flashing using Lg UP
Some tutorial points by vaniok56 (Reddit)
Click to expand...
Click to collapse
Thanks for the tutorial...will this still keep all settings etc from oreo?
Matt
it took a lot longer than 1mn to finish that bootloop thing, you gave me a scare LMAO
after like 10mn or so the phone is up and running
thanks
matthew33 said:
Thanks for the tutorial...will this still keep all settings etc from oreo?
Matt
Click to expand...
Click to collapse
yes
KyleKlarkson said:
it took a lot longer than 1mn to finish that bootloop thing, you gave me a scare LMAO
after like 10mn or so the phone is up and running
thanks
Click to expand...
Click to collapse
Good for u
I keep getting an error saying mtp service not running after clicking the start button to initiate the upgrade.
Leonidas87 said:
I keep getting an error saying mtp service not running after clicking the start button to initiate the upgrade.
Click to expand...
Click to collapse
Here you go:
https://www.youtube.com/watch?v=OaCdtRz8k-g
Matt
I have already tried to upgrade this beta version a few times, however, I always have an SPC error at the beginning of the process (c.a. 4%). I searched around xda and found out that this error is attributed to "a wrong version" - but this should be impossible as I am using H873.
Leonidas87 said:
I keep getting an error saying mtp service not running after clicking the start button to initiate the upgrade.
Click to expand...
Click to collapse
Mostly Occurs when you have LG Bridge. I also got that error uninstalling LG bridge resolved it.
DVD-XDA said:
I have already tried to upgrade this beta version a few times, however, I always have an SPC error at the beginning of the process (c.a. 4%). I searched around xda and found out that this error is attributed to "a wrong version" - but this should be impossible as I am using H873.
Click to expand...
Click to collapse
You should be using H87320i in order to update. Please make sure you have correct drivers and you are using LGUP version I provided. In order to update your phone should be on the home screen and sometime Lg bridge also cause trouble
I have H871 that has been converted to H873 by installing the Canadian Oreo ROM. Is it possible for me to upgrade to pie using this tutorial?
I've never installed lg bridge.
I'm wondering if it only works with specific carriers. If I click firmware update the phone reboots and trying to do a firmware update just to see.
No matter what I get the mtp error when trying install this firmware.
I'm in Canada
H7320i software version.
Is it possible to install on h87320c?
I am using H87320i, flashed using LGUP+Uppercut few months ago. I uninstalled LG bridge and tried to use new version of LGUP + a newer LGUP_common.dll, however, always have an error : 0x2000 open port error.
This seems to be related to the LGUP_common.dll, but I already tried to use few different files (versions) downloaded from different sources, the error is still there. (Note that driver is working fine as I can access my phone using PC/laptop).
@harib12: can you please upload the dll file you used?
umaga2012 said:
I have H871 that has been converted to H873 by installing the Canadian Oreo ROM. Is it possible for me to upgrade to pie using this tutorial?
Click to expand...
Click to collapse
If you are already using H873 stock rom then it should be fine however, I will not take responsibility for your action. Compatibility mainly depends on hardware similarity.
DVD-XDA said:
I am using H87320i, flashed using LGUP+Uppercut few months ago. I uninstalled LG bridge and tried to use new version of LGUP + a newer LGUP_common.dll, however, always have an error : 0x2000 open port error.
This seems to be related to the LGUP_common.dll, but I already tried to use few different files (versions) downloaded from different sources, the error is still there. (Note that driver is working fine as I can access my phone using PC/laptop).
@harib12: can you please upload the dll file you used?
Click to expand...
Click to collapse
I am not using any common dll
LeeTG3 said:
Is it possible to install on h87320c?
Click to expand...
Click to collapse
It should be didn't try but it is FOTA. An OTA requires a sequence. However, as you are pushing this using LG UP maybe you have some luck. But I suggest flashing H8732oi KDZ.
Leonidas87 said:
I've never installed lg bridge.
I'm wondering if it only works with specific carriers. If I click firmware update the phone reboots and trying to do a firmware update just to see.
No matter what I get the mtp error when trying install this firmware.
I'm in Canada
H7320i software version.
Click to expand...
Click to collapse
If You're following this tutorial your phone should show a FOTA screen then it should boot. It is an open FOTA and not restricted to carriers. and are you using the links i have given? do you install any Common dll?. If yes remove the common dll as your using upper cut.
I use this tutorial and LG UP tell me a message that have a problem with dll.
Can you help me.
Enviado desde mi LG-H870 mediante Tapatalk
yoyodiaz said:
I use this tutorial and LG UP tell me a message that have a problem with dll.
Can you help me.
Enviado desde mi LG-H870 mediante Tapatalk
Click to expand...
Click to collapse
You didn't replace the model folder and LGUP in C drive properly. Don't use the folder you downloaded to start the program.