This Thread is for everything related to the Amazfit watch that does not fit into the other threads.
Updated to 1.2.6a (Chinese Version)
Changelog with Google translate:
1.2.6a update log
update GPS firmware
Add "Golden Rooster" daewoo new dial to support the replacement of dial data
Add a new dial background Contest A update,
Added dial background Contest Top5 background
Add Alipay, QQ red envelope reminder (Android phone only)
optimization - eternal moment "table
Optimization "timeless" dial interface
optimization data synchronization (recommended upgrade version 1.2.1 Hua Mi watch App)
optimization training center
optimization system stability
bug fixes
Click to expand...
Click to collapse
Does anyone know what Bluetooth Class the Amazfit uses?
Today i had my phone (Huawei P9lite) on the bottom of my car's trunk and was over 40 Meters away from it. Despite that fact i got several messages on my watch.
This seems an unusual long distance to me.
So at least i really can not complain about the range of my BT.
For who is interested in 1.2.1 Hua Watch App here is my link :https://app.box.com/s/uzov816mmzagzctcj71mlniaph5qhrdu
As there is little or no info available on HW after some investigation for me it looks like its Ingenic M200 CPU, and its probably following newton2 platform. Maybe somebody find this useful.
mmarko said:
As there is little or no info available on HW after some investigation for me it looks like its Ingenic M200 CPU, and its probably following newton2 platform. Maybe somebody find this useful.
Click to expand...
Click to collapse
I can confirm this. There are many references in the firmware to ingenic code.
Can someone confirm that with Amazfit Watch App 1.2.1 the ability to upload custom watch faces got lost?
alexinc said:
Can someone confirm that with Amazfit Watch App 1.2.1 the ability to upload custom watch faces got lost?
Click to expand...
Click to collapse
Have the same issue here. With 1.2.0 it worked, with 1.2.1 it is gone.
But honestly, i found the feature quite useless as a transflective LCD isn't really good in displaying images and the readability of the watch face gets worse with a background image.
it worked for me, thanks for the translation!!
Had just another issue that i find a bit annoying.
Went out for a little run and had to go slow because of the snow.
The watch automatically paused the logging. so i had to take my gloves off to keep it going. while putting my gloves back on, it already paused again. i left the watch unattended and it really didn't record most of my run. It recorded a time of 42 minutes but only 900 meters.
They should at least wait two minutes with GPS on and check if the runner continues moving. What if you have to stop at a traffic light?
Today I did a run again. The GPS was failing again with US-firmware. I am very disappointed with the reception.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The red line was the tracked one, the blue line the actual route I ran. I need to test the new chinese versions of the firmware.
flintzen_123 said:
The red line was the tracked one, the blue line the actual route I ran. I need to test the new chinese versions of the firmware.
Click to expand...
Click to collapse
Seems that the GPS is turning off. You should really go for another firmware.
My lat/long precision is decent with 1.2.6b but elevation in the first few trackpoints still has the value -20000meters
Beleriand said:
Seems that the GPS is turning off. You should really go for another firmware.
My lat/long precision is decent with 1.2.6b but elevation in the first few trackpoints still has the value -20000meters
Click to expand...
Click to collapse
Hi flintzen_123,
I have done 2, 3 running sessions in the open area with the 1.2.6b and the recorded track is typically withing 5 m from the actual track.
Occasionally I get smooth deviation of something like 10m but it it is not very often.
When I was with 1.2.5 I had deviations like 100m but the recorded track was continuous.
In your case your GPS loses the sync with the satellites. You have not stooped or running very slow, correct?
I hope it is not a hardware issue you are facing.
If I have to summarize the watch GPS (1.2.6b) is kind of OK even though
it is at least twice as less accurate as my phone, but probably I should expect this?
Not sure what is the typical accuracy of the Garmin watches.
What I am missing now is the Altitude and simple Strava export from my phone.
Regards
Dimitar
dpenevdpenev said:
If I have to summarize the watch GPS (1.2.6b) is kind of OK even though
it is at least twice as less accurate as my phone, but probably I should expect this?
Not sure what is the typical accuracy of the Garmin watches.
Click to expand...
Click to collapse
I was not running slowly, so that can't be it. I needed to stop a couple of meters before the connection was lost since I needed to cross a main street with frequently running cars. Also I do not understand, that sometimes everything just works fine and another time it is totally unusable. Almost the same route then. I have now switched to the latest chinese firmware, but still the measurements are shown in miles instead of kilometers. When I first switched back to version 0.9.5. the km were back but with the latest version it shows miles again.
Beleriand said:
Have the same issue here. With 1.2.0 it worked, with 1.2.1 it is gone.
But honestly, i found the feature quite useless as a transflective LCD isn't really good in displaying images and the readability of the watch face gets worse with a background image.
Click to expand...
Click to collapse
The watchfaces work quite well if you modify the golden rooster watchface and apply a vector based background image, then it displays the white clock hands on your colored background, which is nicely readable. The only annoying issue is, that clock hands don't move when the screen ist idle. You have to wake up the screen to see what time it really is.
MyriaBoa said:
The watchfaces work quite well if you modify the golden rooster watchface and apply a vector based background image, then it displays the white clock hands on your colored background, which is nicely readable. The only annoying issue is, that clock hands don't move when the screen ist idle. You have to wake up the screen to see what time it really is.
Click to expand...
Click to collapse
thats only partly true. you can't see the seconds in realtime, but watch face is updated every minute in idle mode...
MyriaBoa said:
The watchfaces work quite well ... background image, ... white clock hands ... colored background, which is nicely readable.
Click to expand...
Click to collapse
I know it works but i prefer maximum contrast. So if the hands are white then the background has to be black and an all black background is not an "image"
All that fancy stuff looks better on OLED or regular LCD.
dpenevdpenev said:
it is at least twice as less accurate as my phone, but probably I should expect this?
Click to expand...
Click to collapse
What kind of Phone is that? I want it.
My Amazfit performs on an equal level to a Garmin Oregon 450 and all the phones i had so far were worse than that.
The Oregon is not perfect but it is usable for Openstreetmap mapping and geocaching. Most high sensitive GPS receivers have more or less problems with reflections that make the position inprecise but that is what they are made for. A receiver that works even without direct satellite view. Best was my GPSMAP 60CSx with an sirfIII chipset but they do not build them any more.
alexinc said:
thats only partly true. you can't see the seconds in realtime, but watch face is updated every minute in idle mode...
Click to expand...
Click to collapse
I geht delays of 10 minutes and more.
MyriaBoa said:
I geht delays of 10 minutes and more.
Click to expand...
Click to collapse
i can't confirm with cn-firmware.
Related
Hi,
Here is the next release of hdSpeedo.
It has been tested on a HTC Touch HD and Diamond, but should work on any WM device with a GPS feed.
New Features
Journey stats saved in /My Documents/hdSpeedo
Tidied up the /My Documents/hdSpeedo folder.
Error logging to file
Display of Max speed. This swaps every 15 secs with the AVG speed
Planned Features
Looking at making the application skinnable
Bug Tracking
None noted at the moment
Please see attached file for full version history.
There are two buttons on the speedo page, one will log your current position, the other will start logging your track.
These write to KML files which you can load into Google Earth as below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*** Please note that this application requires the SQL CE Framework installed ***
Otherwise you get the following error.
"An unhandled exception occured Can't find PInvoke DLL 'sqlceme35.dll"
Please install SQL CE from the cab found here.
Please bear in mind that I have written this for my own use and am quite happy to put this out for others to use. I will take on board suggestions, but will continue to develop this at my own pace.
Many Thanks,
Paul Ryder.
Thanks for you application.
I see the bars on the top left corner. Is it GPS signal status ? If so, why the bars is still there when I stop GPS ?
Bug Tracker
Bug Tracking.
1) - GPS Signal bars stay after GPS is stopped.
Outstanding
duongla said:
Thanks for you application.
I see the bars on the top left corner. Is it GPS signal status ? If so, why the bars is still there when I stop GPS ?
Click to expand...
Click to collapse
Ah, that would be a bug..
Cheers, have added it to bug tracker and will resolve it shortly.
Great little application. Thank you.
A suggestion, perhaps an adjustable speed warning. IE change screen colour when over a set top speed. (or even stages of screen colour changes ie at 30/50/80 etc)
Thanks again
I noticed the name of your app "GPS Speedo" but some one already has that name for there GPS app over @ http://www.tchartdev.com/
So it'll get confusing to know whats what between the two.
Hi Ralph,
Tried your application yesterday and today and seems to be working fine. Speed shows nicely, AVG seems to be correct.
Some pointers you might wanna consider;
1- The font could be more clear. The "greyed" lines are a bit too visible I think
2- Are the gps records logged? You could integrate this into some kind of export. For people (like myself) who drive the same route to work every day, it would be fun to see some statistics..
3- Max. speed warning (no sound effects, please )
If I come up with something else, ill let you know. Thanks for the nice app!
RelicXII said:
I noticed the name of your app "GPS Speedo" but some one already has that name for there GPS app over @ http://www.tchartdev.com/
So it'll get confusing to know whats what between the two.
Click to expand...
Click to collapse
hmm, maybe I should call it hdSpeedo, what do you think, maybe not eh.. lol
Any ideas?
Boxersox said:
Great little application. Thank you.
A suggestion, perhaps an adjustable speed warning. IE change screen colour when over a set top speed. (or even stages of screen colour changes ie at 30/50/80 etc)
Thanks again
Click to expand...
Click to collapse
housert said:
Hi Ralph,
Tried your application yesterday and today and seems to be working fine. Speed shows nicely, AVG seems to be correct.
Some pointers you might wanna consider;
1- The font could be more clear. The "greyed" lines are a bit too visible I think
2- Are the gps records logged? You could integrate this into some kind of export. For people (like myself) who drive the same route to work every day, it would be fun to see some statistics..
3- Max. speed warning (no sound effects, please )
If I come up with something else, ill let you know. Thanks for the nice app!
Click to expand...
Click to collapse
1 - Still not decided on the font yet, I like the matrix style, but was going for the grid behind it. I might just remove that.
2 - They are not logged yet, I just need to know how people want it logged?
Raw nmea sentences
KML files to use in Google Earth
Or another way
3 - I though of this, how would you like it. Single speed or stepped as suggested before?
I am also going to provide logging for the trip, times/distance/(ave/max) speed etc
Cheers,
Paul.
Hi, just wanted to let you know that this runs fine on my Sprint Touch (Vogue) running a stock 6.1 ROM.
Thanks for your efforts!
shappy0869 said:
Hi, just wanted to let you know that this runs fine on my Sprint Touch (Vogue) running a stock 6.1 ROM.
Thanks for your efforts!
Click to expand...
Click to collapse
Cheers, glad to find it does work on others machines..
Hi Mr Ralphman
I found this issue, i install Gps speedo and my Gmaps turn on this
megapinky said:
Hi Mr Ralphman
I found this issue, i install Gps speedo and my Gmaps turn on this
Click to expand...
Click to collapse
this font is now also used when i call someone or when i receive a call...
megapinky said:
Hi Mr Ralphman
I found this issue, i install Gps speedo and my Gmaps turn on this
Click to expand...
Click to collapse
housert said:
this font is now also used when i call someone or when i receive a call...
Click to expand...
Click to collapse
Hmm, All I do is install the two fonts, I know that WM will use the best choice font, but that's a bit silly.
I'm going to remove this one from the next release. Try going to \windows\fonts and deleting the Font that Ends in A___.ttf.
Cheers,
Paul.
here too
MrRalphMan said:
Hmm, All I do is install the two fonts, I know that WM will use the best choice font, but that's a bit silly.
I'm going to remove this one from the next release. Try going to \windows\fonts and deleting the Font that Ends in A___.ttf.
Cheers,
Paul.
Click to expand...
Click to collapse
Happened the same to me...
Looks like the apps that are being affected are missing a font, I had this with the Facebook app installed by default on Dutty's Leo R4.
Windows Mobile tries to be clever if you select a font and it's not on the device, it chooses the one closest in size (I think) to the one it's trying to use, thus you get some Random effects.
I'll see if I can restrict the font to only be used by my app, deleting the font will revert your other apps back to normal.
Paul.
MrRalphMan said:
...., deleting the font will revert your other apps back to normal.
Paul.
Click to expand...
Click to collapse
But also 'cause GPS Speedo to become unusable? I didn't try though..
It is still usable, but the Gray background looks even worse.
At least your other apps are usable again.
I'll get an update out at the weekend.
MrRalphMan said:
It is still usable, but the Gray background looks even worse.
At least your other apps are usable again.
I'll get an update out at the weekend.
Click to expand...
Click to collapse
Active developer +1
First change.
Removed one of the fonts as it was making other apps unusable, thanks MS..
Also changed the name as GPS_Speedo isn't unique by any means.
Remove previous version if installed.
Unzip the cab file, copy to device and kick off install with file manager.
Cheers,
Paul.
This is a great application Paul, my 300ZX's speedometer does not work, so I use this app as an alternative and help me stay in the speed limit. Cops always watching me if I passed the limit in the highway
Hi all.
Highly experimental app I've been working on. It basically uses the accelerometer and ambient light sensor to handle gesture events.
Current features:
- Wave to answer
- Wave to ignore
- Autolock when dark
- Turn to unlock
- Shake to save
It works well on my Fuze, but I'm not sure about other HTC devices.
Also, it needs the .NET Compact Framework.
Any feedback, let me know!
Video: http://www.youtube.com/watch?v=TQBrqpa7_Wg
Download: http://windowsphonehacker.com/files/gesture.CAB
Dont work on HTC Imagio is cause dont have ligth sensor?
great idea
Very nice idea!
I dont know how to "turn like a key" though
Will post more feedback when I try a phone call.. its 5 AM here now
very nice application....i saw the video clip...good....is it possible to make the wave and it will activate the speaker mode...this will be a good feature when we're driving..
Thanks will test it out
Awsome!
The autolock feature is a bit touchy on my TP2. Even on the less sensative setting it still will autolock on and off. Not a feature I want though so no worries.
Thanks!
Thanks for your feedback, all!
About the speakerphone feature, I have it added in the latest version. If anything comes up that needs fixing, I will add that, but otherwise you should see an update later today
Sorry I never got back to you about the PoC gesture app earlier.
I've just tested out this new experimental app - cool idea!
I was able to get 'Wave to answer' and 'Wave to ignore' going easily enough when the TP was on my desk and on a chair closer to the window. I had to wave a couple times to get the desired response but found that if I move my hand across the light sensor for about .5 seconds around an inch above the phone it was pretty consistent.
I couldn't get the 'AutoLock' working consistently. If I cover the light sensor with a piece of paper or put the top 80% of the phone into a cloth bag it doesn't lock. A few times when I was covering the light sensor with my hand the lock screen flashed up but disappeared again without me having to unlock it.
It took a bit to figure out how to unlock the lock screen but from watching your YouTube video and playing around I can do it easily. It seems best to grab the phone between my thumb and index finger with my thumb on the lock icon (so it is green). Then I flick the bottom end of the phone quickly 90 degrees and back. It is harder to do when holding the right way up - it seems that the bottom end needs to have the motion rather than the top end.
'Shake to Save' is sweet, however, it was inconsistent for me. I'm not sure if there is a particular shaking orientation that works best (it is hard to tell in your video). When it worked it was quick and easy.
At about medium sensitivity the average light sensor reading is around 14 when sitting on my desk on a cloudy day. If I set it on a chair closer to the window I get an average of around 25.
I am using ChangeScreen - a g-sensor orientation flipper: http://forum.xda-developers.com/showthread.php?t=468488 I've set an exception for 'gesture' but it hasn't seemed to helped (well, it does prevent the Gestures app from changing orientation when I tilt/shake the phone).
Nice experiment!
kryptech said:
Sorry I never got back to you about the PoC gesture app earlier.
I've just tested out this new experimental app - cool idea!
I was able to get 'Wave to answer' and 'Wave to ignore' going easily enough when the TP was on my desk and on a chair closer to the window. I had to wave a couple times to get the desired response but found that if I move my hand across the light sensor for about .5 seconds around an inch above the phone it was pretty consistent.
I couldn't get the 'AutoLock' working consistently. If I cover the light sensor with a piece of paper or put the top 80% of the phone into a cloth bag it doesn't lock. A few times when I was covering the light sensor with my hand the lock screen flashed up but disappeared again without me having to unlock it.
It took a bit to figure out how to unlock the lock screen but from watching your YouTube video and playing around I can do it easily. It seems best to grab the phone between my thumb and index finger with my thumb on the lock icon (so it is green). Then I flick the bottom end of the phone quickly 90 degrees and back. It is harder to do when holding the right way up - it seems that the bottom end needs to have the motion rather than the top end.
'Shake to Save' is sweet, however, it was inconsistent for me. I'm not sure if there is a particular shaking orientation that works best (it is hard to tell in your video). When it worked it was quick and easy.
At about medium sensitivity the average light sensor reading is around 14 when sitting on my desk on a cloudy day. If I set it on a chair closer to the window I get an average of around 25.
I am using ChangeScreen - a g-sensor orientation flipper: http://forum.xda-developers.com/showthread.php?t=468488 I've set an exception for 'gesture' but it hasn't seemed to helped (well, it does prevent the Gestures app from changing orientation when I tilt/shake the phone).
Nice experiment!
Click to expand...
Click to collapse
Thanks for the feedback.
The sensitivity does not affect how much the light reading is, nor the G-sensor sensitivity. It has more to do with how much of a light change counts as a gesture.
As for shake to save, the program currently uses the Z vector to tell if its shaking. This is pure force (up/down) of the phone, but it's been very hard to activate even for me.
I'm going to switch it to X or Y once I get ready to release the new version, just to make it easier.
Jaxbot said:
As for shake to save, the program currently uses the Z vector to tell if its shaking. This is pure force (up/down) of the phone, but it's been very hard to activate even for me.
I'm going to switch it to X or Y once I get ready to release the new version, just to make it easier.
Click to expand...
Click to collapse
I feel silly asking but the Z axis runs along the length of the phone, from the mic end to the speaker end? And the X axis runs from side-to-side, while the Y axis is the thickness (screen-to-back of battery)?
Here's a diagram. It's for a wiimote, but I guess its the same principal:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The important thing to note is that the X and Y are based on rotation, while Z is based on G-force (gravity) pulling on it.
would love to use this app
how do I update my .NET Compact Framework so that is works?
thanks
Google .net CF 3.5. Download and install. i believe it can install through active sync and cab directly.
nice
look nice, will give it a go and get back with the feedback
Did some changes with the Shake to save, and add auto-speakerphone.
Should be the same download link, but if you have problems let me know (Visual Studio is deploying kindof weird):
http://windowsphonehacker.jaxbot.com/files/gesture.CAB
Jaxbot said:
Did some changes with the Shake to save, and add auto-speakerphone.
Should be the same download link, but if you have problems let me know (Visual Studio is deploying kindof weird):
http://windowsphonehacker.jaxbot.com/files/gesture.CAB
Click to expand...
Click to collapse
download link is not working
pdukanac said:
download link is not working
Click to expand...
Click to collapse
Try:
http://windowsphonehacker.com/files/gesture.CAB
megapinky said:
Dont work on HTC Imagio is cause dont have ligth sensor?
great idea
Click to expand...
Click to collapse
the imagio has a light sensor in the corner.
Questions... does the app stay resident in the background so that any gesture will trigger the actions? how's the battery drain?
aussiebum said:
Questions... does the app stay resident in the background so that any gesture will trigger the actions? how's the battery drain?
Click to expand...
Click to collapse
Yes it does, the battery drain is fairly insignificant I think, but I'm not a battery junkie so I haven't really compared it.
Hi,
I have developed an Xposed module to enable the pad in Pokemon Go.
The module allows to set a starting GPS position, set the pad speed an to start the game directly from the module UI (pressing the PokemonGo logo).
To enable/disable the pad, just switch to enable/disable.
The module DOESN'T USE MOCK POSITION. I used a different approach to develop the module.
For this reason, it's more difficult to discover (probably) by a mock location checker, but there is a little time delay between the click on the pad and the game position update.
It's still in development, so please report some issue or improvement suggestions.
Instructions:
1) Start the "DarkPokemonGo" app.
2) Set initial GPS position (default is Pisa, Leaning Tower) and speed (expressed as degrees for click, REALLY
recommended default speed is 0.0001). Remember to validate them (click on DONE,ENTER on keyboard)!!!
3) Enable module (and pad appears).
4) Start game (pressing the PokemonGo logo).
5) ENJOY!
Disclaimer: I'm not responsible for ban or other issues! Use this module on your risk.
VIDEO:
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Updates
DEVELOPMENT SUSPENDED: see this post
I'm working on:
- Bookmarks position/location
- Continuous walking
- Location blinking fix
- Pick initial position on map
Changelog v1.5
- Bug (different speed N/S vs W/E) fixed.
Changelog v1.4
- Boost mode added!
- Support button added
Changelog v1.3
- Spinner instead of EditText for changing speed value.
Changelog v1.2
- Performance improvement!
- Speed now in meters/click!
- Pad issue fixed
- Minor bug fixed
Changelog v1.1
- Modified some graphic
- Add setting activity (enable/disable vibration, donate button)
- Start from current location button
- Fixed "position flickering" issue.
FAQs
Does the eggs system work?
Yes! If you set a low speed (default one is fine) and move slowly from one point to another, it works!
Is the module noticeable?
It shouldn't. Anyway my advice is to set a starting point and then move slowly from one location to another using the pad. If you move quickly from a side to the world to another, you could be banned!
Do I need to enable mock location? And GPS?
No, mock location is not required. Yes, you need to turn GPS on.
Can you add the feature X?
Sure, I'm opened to improvement suggestions.
Screenshots don't work !
Slem34 said:
Screenshots don't work !
Click to expand...
Click to collapse
Fixed
Darkalbo said:
Fixed
Click to expand...
Click to collapse
Just stopped working ? Check please !
Was working perfectly for a couple now just stopped working
My vision log/lat settings also didn't work
Hey! I was using your mod and was soft ban in less than 5 minutes.(bummer) but it's a great one just not unnoticeable enough for Niantic.
Would you be able to add an option to either continue from current location or add a map so we are able to select start location rather than the latitude and longitude?
Hey Darkalbo, thx for this great module! It's perfect for when it rains, I'm feeling lazy or I want to catch Italian pokemon. I have a few suggestions, though.
-I don't know what controls you use in your video, but my fingers are way to big to reliably use your navigation buttons. One possibility would be to put one button at every edge of the screen, maybe also translucent and with a N/E/S/W designation. But anything to make my movement less random would be a big help.
-GPS coordinates are not easy to work with, I think. It would be a little easier if there were some presets or profiles we could make for the coordinates, like actual location, last ingame location, Pisa, home.
-Option to turn vibration off?
That's just my two cents.
Does it solve the most common problem with xposed modules related to pokemon go? That being The Module/ Joystick disappears or the app closes as it can't retain in memory. 1gb RAM phone here. If yes , i'll sure try this
I tried this today. First of all, thank you so much for developing this module!!!
Some bugs that I found - it's difficult to maneuver and get the direction you want. Could you add a feature that gives you the option to start from your current position, and move around from there?
Also, when I was moving around locally and collecting from the Pokéstops, it was perfect. Then I put myself into the New York Botanicals and then my goodies stopped coming when I would spin a Pokéstop.
Sent from my SM-G930F using XDA-Developers mobile app
steve51184 said:
Was working perfectly for a couple now just stopped working
My vision log/lat settings also didn't work
Click to expand...
Click to collapse
Very strange behaviour...
Try to restart your phone so the Xposed framework should reload the module.
Douangdara said:
Hey! I was using your mod and was soft ban in less than 5 minutes.(bummer) but it's a great one just not unnoticeable enough for Niantic.
Click to expand...
Click to collapse
It's unnoticeable by client side, but it's still noticeable from server side. If you go from NYC to Tokyo and then put your GPS location on London, they could think that you are cheating or you have invented teleportation
My advice is to move slowly from one location an another, without "jump".
GOGO98901 said:
Would you be able to add an option to either continue from current location or add a map so we are able to select start location rather than the latitude and longitude?
Click to expand...
Click to collapse
Yes, sure. I'm adding more features in next days
SiliconPaperweight said:
Hey Darkalbo, thx for this great module! It's perfect for when it rains, I'm feeling lazy or I want to catch Italian pokemon. I have a few suggestions, though.
-I don't know what controls you use in your video, but my fingers are way to big to reliably use your navigation buttons. One possibility would be to put one button at every edge of the screen, maybe also translucent and with a N/E/S/W designation. But anything to make my movement less random would be a big help..
Click to expand...
Click to collapse
I tried to make something similar to the nintendo game boy pad, this is the reason of the position of it.
Anyway I will probably add the N/E/S/W on pad.
SiliconPaperweight said:
-GPS coordinates are not easy to work with, I think. It would be a little easier if there were some presets or profiles we could make for the coordinates, like actual location, last ingame location, Pisa, home.
Click to expand...
Click to collapse
You are right, I'm working on it.
SiliconPaperweight said:
-Option to turn vibration off?
Click to expand...
Click to collapse
Sure! Coming soon
jjohn7293 said:
I tried this today. First of all, thank you so much for developing this module!!!
Click to expand...
Click to collapse
Thanks
jjohn7293 said:
Some bugs that I found - it's difficult to maneuver and get the direction you want. Could you add a feature that gives you the option to start from your current position, and move around from there?
Click to expand...
Click to collapse
Sure, I'm working on it.
jjohn7293 said:
Also, when I was moving around locally and collecting from the Pokéstops, it was perfect. Then I put myself into the New York Botanicals and then my goodies stopped coming when I would spin a Pokéstop.
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, my advice is to move slowly from one point to another and not just "jump". This is the reason because I have developed the option to set a starting point, and then just move slowly around the map, because in this way the module is unnoticeable from Niantic server. If you move from NYC to Tokyo or Paris in just 5 minutes, they could notice something strange
Picked lon/lat but once loaded in I'm stood in the middle of the ocean when I know it's a big city? Any ideas?
---------- Post added at 11:22 AM ---------- Previous post was at 11:09 AM ----------
When I add a long lat of a big city I I'm standing in the middle of the ocean with nothing around me but when I clear the dark Pokemon cache it takes me to Pisa again.
I think they recognise me...
Or I became very unlucky or they are punishing me
It works fine for 6 minutes but after that I could move without catch any...
Just the other day I received my Amazfit BIP, and I am impressed by the little but powerful device. However, seeing and knowing what it can do, but not having a way to benefit from it in the best way, is a bit frustrating. I thought it might be a good idea to start a thread here to collect ideas from users, that can either be implemented by official developers, or by modders who know how to do these things. So, let's get started with a few ideas of mine:
1. It would be great to have either a permanent measurement of the heart rate, or at least a way to set up repetitive measurements, e.g. every minute or every two/five minutes. I know it is possible, because the device does it when in "activity" mode, e.g. "running".
1b. Talking about heart rate, it would be nice to have the watch vibrate after measuring the heart rate on the "Status" page (in the same way the MiBand 2 does it).
2. As the device has GPS, it would be great to have a possibility to use it to show the location on the display (in my eyes, it would fit perfectly onto the "Status" page). Just showing coordinates would be sufficient, and could be incredibly helpful in emergencies.
3. For notifications, it should be possible to delete them separately, by some swiping action or a long press on the screen
4. On the watchface, it should be possible to change the display of the date from MM/DD to DD/MM, as this is usual way in many countries.
5. As to the brightness of the display, I find that the lowest setting is still to bright for me at night. It would be great to have a setting that is lower than the lowest present one, but not "off".
nobody interested?
Totally agree
Yep, in fact the only reason I bought the watch was the GPS and the compass. And I never imagined that you can't even see the current GPS position on the watch itself!!! Showing the current coordinates on screen should be extremely simple and I think this is a must for a GPS watch!!! If I needed the smartphone to see the coordinates, why the hell would I need to have GPS on the watch itself.. almost every smartphone these days have their own GPS????
paleopterix said:
Yep, in fact the only reason I bought the watch was the GPS and the compass. And I never imagined that you can't even see the current GPS position on the watch itself!!! Showing the current coordinates on screen should be extremely simple and I think this is a must for a GPS watch!!! If I needed the smartphone to see the coordinates, why the hell would I need to have GPS on the watch itself.. almost every smartphone these days have their own GPS????
Click to expand...
Click to collapse
At least the guys from Huami are very responsive: displaying GPS coordinates is now possible, along wirh air pressure (measured by the BIP's barometer), and altitude. To see these data, swipe left from the compass). This new feature came with Mifit 3.1.6 and firmware 0.9.49.
9.49 is not an official firmware
catmio said:
9.49 is not an official firmware
Click to expand...
Click to collapse
Wrong, it's as official as it can be. Its beta, but stable enough for daily use - and updates come every few days anyway. Check them out here: https://www.apkmirror.com/apk/anhui-huami-information-technology-co-ltd/mi-fit/
Well, it does not apear on my phone through MiFit app. Also some are complaining on facebook that this firmware eat a lot of battery.
catmio said:
Well, it does not apear on my phone through MiFit app. Also some are complaining on facebook that this firmware eat a lot of battery.
Click to expand...
Click to collapse
As I said, it's a beta. I am now on 0.9.59, and have zero problems with battery life. Yes, it does need some more energy, when you use new features such as continuous heart rate analysis or displaying GPS often, but it's totally worth it for me. Your mileage may vary, of course.
frofa said:
As I said, it's a beta. I am now on 0.9.59, and have zero problems with battery life. Yes, it does need some more energy, when you use new features such as continuous heart rate analysis or displaying GPS often, but it's totally worth it for me. Your mileage may vary, of course.
Click to expand...
Click to collapse
Good to know.
Another must have, would be the possibility to set up 0 (zero) second to the notification delay.
catmio said:
Another must have, would be the possibility to set up 0 (zero) second to the notification delay.
Click to expand...
Click to collapse
agreed! The minimum now possible, 3 seconds, appears a bit too long. Maybe there is a technical reason for this, but I would definitely also prefer to set the delay to zero.
What I noticed yesterday, and what I find super annoying, is the behavior of the auto-pause in activities. This feature is very useful, no question, but the way it is implemented drives me crazy. It starts too quickly (2 seconds or so), which is not practical, given that sometimes you have to stop running or walking, e.g. when crossing a street safely. It would be nice to have the possibility for a custom delay (several seconds). But what's even worse is that it has problems to be resumed - whenever I click resume, it basically immediately pauses again, often three to four times, and totally independent of whether I am running or walking again (which often I CANNOT when I have to handle the resume button several times!). I think this is just a bug, but if it isn't, there should be some way that suppresses auto-stop after pressing resume, for at least 10 seconds or a minute (if someone wants to stop it again during that time, for good reason, he can still do it manually anyway!).
Thanks
frofa said:
At least the guys from Huami are very responsive: displaying GPS coordinates is now possible, along wirh air pressure (measured by the BIP's barometer), and altitude. To see these data, swipe left from the compass). This new feature came with Mifit 3.1.6 and firmware 0.9.49.
Click to expand...
Click to collapse
Thanks for the info, I will check into it.
---------- Post added at 10:36 PM ---------- Previous post was at 10:16 PM ----------
frofa said:
As I said, it's a beta. I am now on 0.9.59, and have zero problems with battery life. Yes, it does need some more energy, when you use new features such as continuous heart rate analysis or displaying GPS often, but it's totally worth it for me. Your mileage may vary, of course.
Click to expand...
Click to collapse
Could you share the link where to download this firmware version, please?
paleopterix said:
Thanks for the info, I will check into it.
---------- Post added at 10:36 PM ---------- Previous post was at 10:16 PM ----------
Could you share the link where to download this firmware version, please?
Click to expand...
Click to collapse
Just use last MiFit version and it will update.
The only problem IO have so far is a deconnexion when I go far from the watch. The miFit app seems to be freezed and faile to reconnect.
I think my problem comes from Oreo.
Notify & Fitness has way more options compared to Mi Fit and that's good to have the choice.
For ex, notifications can be customized. (hello 3 sec delai from Mi Fit ).
For ex : 2 vibs // showing SMS // 22 Bibs
Instants vibs for phone ....
frofa said:
4. On the watchface, it should be possible to change the display of the date from MM/DD to DD/MM, as this is usual way in many countries.
Click to expand...
Click to collapse
it's possible. Use bitbucket.org/valeronm/amazfitbiptools
unpack watchface: WatchFace.exe wf.bin
replase in *.json (sample)
Code:
"MonthAndDay": {
"Separate": {
"Day": {
"TopLeftX": 143,
"TopLeftY": 31,
"BottomRightX": 158,
"BottomRightY": 40,
"Alignment": 18,
"Spacing": 2,
"ImageIndex": 11,
"ImagesCount": 10
}
},
"TwoDigitsMonth": 1,
"TwoDigitsDay": 1
},
To replace two widgets (sample):
Code:
"MonthAndDay": {
"Separate": {
"Month": {
"TopLeftX": 56,
"TopLeftY": 40,
"BottomRightX": 82,
"BottomRightY": 57,
"Alignment": 18,
"Spacing": 1,
"ImageIndex": 11,
"ImagesCount": 10
},
"Day": {
"TopLeftX": 93,
"TopLeftY": 40,
"BottomRightX": 119,
"BottomRightY": 57,
"Alignment": 18,
"Spacing": 1,
"ImageIndex": 11,
"ImagesCount": 10
}
},
packaging:
WatchFace.exe wf/wf.json
result:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It would be nice to have more activities to choose like gym...
For me, discard single notifications by swiping rigth/left on it and open on the phone by swiping on the opposite side would be AWESOME.
An app to control the music and video player on the phone would be an extra of awesomeness, so when your'e riding to the work or making some sports, if you could change/pause/volume down/up the music without grabbing the phone or when being at home viewing via plex some tv shows and pause the video when you must go to the oven for the pizza would made your existence a bit happier
wodow said:
It would be nice to have more activities to choose like gym...
Click to expand...
Click to collapse
Or indoor cycling like the Pace.
Also I'll like to have the notifications displayed for longer not just 3-4 seconds as it is now.
catmio said:
Also I'll like to have the notifications displayed for longer not just 3-4 seconds as it is now.
Click to expand...
Click to collapse
Like always, it would be great to have this customizable. For me, 3-4 seconds is ok, because I can display it at any time later anyway by swiping up from the watch face. It would be nice, though, to have some indication on the watch face to show that there are unread notifications.
yoyurinig said:
it's possible. Use bitbucket.org/valeronm/amazfitbiptools
unpack watchface: WatchFace.exe wf.bin
...
Click to expand...
Click to collapse
Thanks for this tip, cool to know! I'd prefer to have it in the official firmware, though. Not because I don't like modding, but because these modifications are always being overwritten whenever there is an official update.
Download now from Google Play Store! And if you like, please leave a rating.
This is the original battery indicator around punch hole cameras, Energy Ring. All variants of the App is now merged into this one 'Universal Edition', future device supports shall only be available through this App.
If you have a device with punch hole camera, reach out via email to get support added!
Similar Apps for other Devices:
Energy Bar
Energy Bar Curved Edition for S8/S9/S10/+
Energy Bar Curved Edition for Note 8/9
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Adds a configurable Energy Ring around the camera lens indicating current Battery level. Dive into the various configuration options, not only you can quickly glance and get the battery info but, Energy Ring adds an accent to your phone's camera lens.
Got a full charge? The Ring will be a 360 degree wrap around the front camera lens.
Battery depleting? So will the arc of Energy Ring.
Out of the box features:-
✓ Energy Ring can be configured from a width of 1 pixel to a donut thick ring
✓ Energy Ring puts almost 0% load on CPU, as it wakes up only to reflect any change in battery level
✓ Energy Ring's direction can be configured as clockwise/bidirectional/anti-clockwise
✓ Energy Ring can hide on fullscreen content (apps, videos, images, games etc)
✓ Energy Ring can be configured to change colors automatically depending on the live battery level
✓ Energy Ring could have a mono color/multiple color segments/gradient (pro)
✓ You can literally assign any color in the world for your favorite configuration
✓ Energy Ring has a number of cool animations whenever a power source is plugged into your device
All that is cool! But what about Energy Ring consuming Battery?!
This is one of the most exciting question for me to answer. Energy Ring more than anything understands that you need to utilize your battery efficiently (after all, that's why you installed the App, right? .) Energy Ring sits on the screen silently putting almost 0% load on CPU, if battery level changes, Android wakes up Energy Ring. Once awake, Energy Ring quickly updates itself and goes back to sleep. And to be that extra efficient, the Ring goes on deep sleep when you turn off the screen, meaning it doesn't even read changes in battery level when the screen is off.
Accessibility Service Requirement:
Android requires Energy Ring to run as an Accessibility Service, to be able to display on Lock Screen. It does not read/monitor any data, whatsoever. This is especially useful for people who have disability to read numbers and work better with visual data.
Download now from Google Play Store! And if you like, please leave a rating.
Just bought today. (Owned the Note 10+ version previously).
Absolutely love it!
Agent Zach said:
Just bought today. (Owned the Note 10+ version previously).
Absolutely love it!
Click to expand...
Click to collapse
Nice! May I ask how did you disable the battery icon? I found info that you should be able to do it using Good Lock app from Galaxy Store but I can't find this app in the store. Thanks!
blinkin said:
Nice! May I ask how did you disable the battery icon? I found info that you should be able to do it using Good Lock app from Galaxy Store but I can't find this app in the store. Thanks!
Click to expand...
Click to collapse
I used QuickStar (part of Good Lock) to hide the battery icon.
Screen Recording 20210202 183614 QuickStar
Image Screen Recording 20210202 183614 QuickStar hosted in Gifyu
gifyu.com
Agent Zach said:
I used QuickStar (part of Good Lock) to hide the battery icon.
Screen Recording 20210202 183614 QuickStar
Image Screen Recording 20210202 183614 QuickStar hosted in Gifyu
gifyu.com
Click to expand...
Click to collapse
Thanks but how did you install it? I can't find the app in the store.
I found Good Lock in the Galaxy Store. I'm not sure why you can't find it. I'd assume Sammobile may have the apk file for "sideloading" somewhere on their site.
nice work man!! gonna test this one out on my s21
blinkin said:
Thanks but how did you install it? I can't find the app in the store.
Click to expand...
Click to collapse
its not available in EU only US, UK , INDI and korea.
you need to download Nicelock from appstore then download the app modul from apkmirror.
thanks for the app. Was missing it up to now!
Agent Zach said:
Just bought today. (Owned the Note 10+ version previously).
Absolutely love it!
Click to expand...
Click to collapse
Awesome! Enjoy the App!
xDroidZz said:
nice work man!! gonna test this one out on my s21
Click to expand...
Click to collapse
How did it go?
cookie666 said:
thanks for the app. Was missing it up to now!
Click to expand...
Click to collapse
You're welcome! Enjoy the App!
Just installed on s21 ultra. Will see how it goes thanks.
I like it, it's cool.. But the charging animations are a little choppy/glitchy. It's like it's running at 15 fps rather than the buttery-smooth 120 hz the S21 is capable of.
Or maybe the animations aren't looping exactly right? I can't tell, but there's something off.
I liked your app.
since updating firmware to android 12 it's not working anymore.
app gives an error and closes
@jagan2 could you please check your email? Or send a PM on here please?
Hi @jagan2,
First thing, I totally love the app! It is very stylish and brings the phone to life.
I wanted to share some feedback (I'm using a Pixel 6 Pro):
I find changing the ring origin too easy, it would be great to add a lock button to leave it fixed.
Also, it would be great to know if you really set it to 0 degrees or 90... I think maybe adding (inside the ring?) an editable text box synchronized with the ring could be perfect. Another idea would be to set the angle to 0, 90... whenever the user got close as if there were invisible guides (this would limit some weird users that might want it on 5 degrees or whatever though).
Please please please, could you add a configuration of merged segments but in gradient mode? Right now merged segments allows an amazing level of configuration as I can set colour 1 to be until 30%, color 2 until 40%, color 3 to 80% and color 4 to 100%. But if I use the gradient feature, I have no control of how long of the ring each color should appear for.
About the animations, I agree with #12, animations seem to start moving gradually but they seem to finish abruptly. Maybe the deceleration algorithm is missing or not finishing properly or something?
Thank you very much for your work!
#Edit: I've been able to kind of sort out point 3 adding 10 colors so each of those are 10% increments (putting a color twice in a row would be a 20% range). It's WAY more beautiful this way! But a bit cumbersome to set up.
Hi @jagan2,
There's a massive bug! If I put my Pixel 6 Pro in landscape, the energy ring disappears.
Can you please fix this? I can help you test it.
Seems like the option to hide the energy ring in full-screen apps also hides it whenever you put your phone in landscape. I thought it would be able to detect when an app is being shown in fullscreen and hide only in those scenarios?
Thanks
@jagan2 , I reached out to you via alemail a few weeks ago but you haven't responded. I'm not sure if you remember, but I helped you with making Energy Ring compatible with the T-Mobile OnePlus 9 and 9 Pro shortly after they were released. I'm now on a custom ROM and your app isn't compatible with it. A dev on Telegram told me to have you do something to make it compatible with the ROM, and/or while using custom props (Pixel). Please PM me on here on on Telegram at the same username as on here. Thanks.
Update: Fixed the issue of System turning off Accessibility Service of Energy Ring frequently, it was a Android System Level bug, a workaround has been deployed successfully, let me know if Energy Ring is stable again for you!
P.S. I am flooded with emails and messages, apologies if I couldn't reply all!
Hey, I used it for my Galaxy S21 Ultra for long time but now for the S23 Ultra it is not on the right place.
Same issue here on S23 Ultra! The icon is displayed to the right of the camera, it's not centered and can't be moved in any way.
Would be awesome if you could take a look. I'm sing this app since my S10+ and I can't live without it