Hello guys,
Yersterday i tried to install cm 14.1 on my kenzo
Wipe--->Firmware zip--->cm14.1 nightly--->gapps full arm64 7.1
Reboot to sysem
Nothing
Vibrate+mi logo for a split second and black screen
Put in charger red blinking led(download mode???)
Try to restart and again vibrate and black screen
Cant enter recovery cant do nothing
How to unbrick?
Did i install incorrectly?
Pls help me guys
Flash stock and start over
Pewperino said:
Hello guys,
Yersterday i tried to install cm 14.1 on my kenzo
Wipe--->Firmware zip--->cm14.1 nightly--->gapps full arm64 7.1
Reboot to sysem
Nothing
Vibrate+mi logo for a split second and black screen
Put in charger red blinking led(download mode???)
Try to restart and again vibrate and black screen
Cant enter recovery cant do nothing
How to unbrick?
Did i install incorrectly?
Pls help me guys
Click to expand...
Click to collapse
Go to fastboot mode and unlock the phone again.. Same happened to me.. just unlock it..
Use different firmware zip file.. check for modified firmware in cm14.1 thread..it wont relock bootloader
You need to unlock bootloader again by going into fastboot mode.
$lim $hady said:
Go to fastboot mode and unlock the phone again.. Same happened to me.. just unlock it..
Use different firmware zip file.. check for modified firmware in cm14.1 thread..it wont relock bootloader
Click to expand...
Click to collapse
How do i know im in fastboot i dont see anything!
Tatoh said:
Flash stock and start over
Click to expand...
Click to collapse
how do i do that if i cant see ****
rjrulz007 said:
You need to unlock bootloader again by going into fastboot mode.
Click to expand...
Click to collapse
I cant see anything how do i do that
Power + volume down to enter fastboot, then unlock it with MiUnlock
Denis:) said:
Power + volume down to enter fastboot, then unlock it with MiUnlock
Click to expand...
Click to collapse
I dont see anything how do i do that
Pewperino said:
I dont see anything how do i do that
Click to expand...
Click to collapse
Nothing happens when you hold power+ volume down?
Can you enter in fastboot mode? If yes, flash stock with mi flash.
If you are in edl, same thing.
Try to unlock, like the guy told you.
Tatoh said:
Can you enter in fastboot mode? If yes, flash stock with mi flash.
If you are in edl, same thing.
Try to unlock, like the guy told you.
Click to expand...
Click to collapse
After unlocking?
Fixed
Ok i just unlocked the bootloader and it's fine, but i cant enable fingerprint password only pin and such, should i go to cm13 or something???
ty guys
you might have goodix sensor
nitephoenix said:
you might have goodix sensor
Click to expand...
Click to collapse
What is that and what do I do with that?
Pewperino said:
What is that and what do I do with that?
Click to expand...
Click to collapse
our kenzo have 2 variant sensor for fingerprint, goodix and fpc,,,,so you need to know which sensor you have
use aida64 app to find your fp sensor
pumpkins12 said:
our kenzo have 2 variant sensor for fingerprint, goodix and fpc,,,,so you need to know which sensor you have
use aida64 app to find your fp sensor
Click to expand...
Click to collapse
Yeah i think i have the goodix one the aida app says i have the fpc idk why...
Pewperino said:
Yeah i think i have the goodix one the aida app says i have the fpc idk why...
Click to expand...
Click to collapse
can you share your aida screenshot for fp sensor part?
pumpkins12 said:
can you share your aida screenshot for fp sensor part?
Click to expand...
Click to collapse
nothing to really screenshot the rom doesnt support the goodix ones, tho i cant find where is the data file,
It says
Manufacturer -- FPC
Model -- FPC102x
hard to share im not really used to use forums wihtout pc sorry
Pewperino said:
nothing to really screenshot the rom doesnt support the goodix ones, tho i cant find where is the data file,
It says
Manufacturer -- FPC
Model -- FPC102x
hard to share im not really used to use forums wihtout pc sorry
Click to expand...
Click to collapse
and then try another rom with fpc support :good:
btw I have fpc102x too and use lineage os 14.1 by umang for my daily driver
Related
Hello, i got a big problem and needed HELP!
Today i got my Note 4...
so i tryed to unlock the bootloader, bad thing did not logg in at the device.
i booted the mobile in fastboot mode and started the official unlock tool.
until 50% it went quite well then i got an error message:
couldn't verify device
current account is differnet from the account info on the device
so i tryed to boot again but was in a bootloop...
i tryed also flashing a new rom (nikel_global_images_7.4.14_20170414.0000.00_6.0_global_b5d5f15e0e.tgz) and again i got an error
"flash boot error"
hope somebody can help
p.s. sorry for my poor english
Following
Did you read this?
dao80 said:
...i tryed also flashing a new rom (nikel_global_images_7.4.14_20170414.0000.00_6.0_global_b5d5f15e0e.tgz) and again i got an error...
Click to expand...
Click to collapse
Are you sure you are using MTK Variant?
akil777 said:
Did you read this?
Are you sure you are using MTK Variant?
Click to expand...
Click to collapse
yes im sure, i tryed this already and still in bootloop
althoug it says download ok
dao80 said:
yes im sure, i tryed this already and still in bootloop
althoug it says download ok
Click to expand...
Click to collapse
Did you use Sp flash tool?, if yes You should tick all except preloader. You will have to wait 5-15mins for the phone to boot up.
akil777 said:
Did you use Sp flash tool?, if yes You should tick all except preloader. You will have to wait 5-15mins for the phone to boot up.
Click to expand...
Click to collapse
yes i used this tool, after rebooting the mi logo is on the screnn for about 7 secounds then the mobile boots again and again...
;(
dao80 said:
yes i used this tool, after rebooting the mi logo is on the screnn for about 7 secounds then the mobile boots again and again...
;(
Click to expand...
Click to collapse
I have never experienced that.. I think you should send it to your mobile repair center.. Be patient,, It might take few days. Don't panic,
akil777 said:
I have never experienced that.. I think you should send it to your mobile repair center.. Be patient,, It might take few days. Don't panic,
Click to expand...
Click to collapse
i m already looking for a mobile repair center here who can repair xiaomi mobiles...
but so fare all numbers i called are not in service anymore or dont repair xiaomi...
dao80 said:
i m already looking for a mobile repair center here who can repair xiaomi mobiles...
but so fare all numbers i called are not in service anymore or dont repair xiaomi...
Click to expand...
Click to collapse
check this http://en.miui.com/thread-491655-1-1.html
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
robjbw said:
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
Click to expand...
Click to collapse
yes i tried china and global
but only bootloop
but to be on the save side, where to i find a the stock rom (flashable with the miflashtool)?
dao80 said:
yes i tried china and global
but only bootloop
but to be on the save side, where to i find a the stock rom (flashable with the miflashtool)?
Click to expand...
Click to collapse
flash done with mi flash? If got error then try with deep flash cable. see yt tutorials
itsmedRb said:
flash done with mi flash? If got error then try with deep flash cable. see yt tutorials
Click to expand...
Click to collapse
deepflash is also possible for mtk devices?
robjbw said:
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
Click to expand...
Click to collapse
tried it again with the mi flash tool i got following error
80x80004005: FAILED (remote: download for partition 'boot' is not allowed
Hey Guys, i soveld the problem...
AND F**K it was a quite easy solution...
i tried so hard was crying and a kind of very desperate...
anyways i aslo wrot a mail to mi and they did not help at all...
they even say i should lock in at the device if im in a bootloop, kinda funny?
anyways so i drained the batterie and nearly about to give up this device....
BUT i give it one last try, plugt it in and booted it... it took a while but after a while i finaly was able to boot the Phone and set it up...
so this threat can be closed...
thank you guys for your help
Hello guys, it looks like this forum is still alive (unlike my phone lol) so let me explain what happened to my D620r.
Firstly - my friend bricked the phone during bootloader unlock process (xD rip) now the phone shows up as QDLoader 9008 yesterday it was like "QHSUSB_BULK" or something like this but after installing some drivers its QDLoader now lol xD (sometimes QDLoader disappears from device manager AND SHOWS UP AS http://imgur.com/a/qJSzE then i have to click the testpoint again)
BASICALLY
I'VE TRIED DOING THIS https://forum.xda-developers.com/showthread.php?t=2582142
nothing happened
and btw all partitions disappeared now there's only QDLoader in Device Manager that's all
Try this:
https://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
Nope, screen dont even light up when i connect the phone (one case was when i connected phone without battery then screen was lighting up but now there's nothing) btw im trying this right now https://forum.xda-developers.com/g2-mini/help/lg-g2-minid620r-hard-brick-recovery-t3543466 but i dont really know how to use this emmc software download app
You can follow the procedure in post #2 of the thread I linked.
not working
EMMC Software download app detects phone as "COM2 Phone in download mode"
pls halp
Kaszke said:
pls halp
Click to expand...
Click to collapse
Try to use the lg flash tool 2014 while using the downloadmode key combination. If the phone gets detect, you can flash a firmware, that is present somewhere in the internet (there are a lot).
doesnt work, pls halp again
Kaszke said:
doesnt work, pls halp again
Click to expand...
Click to collapse
If you need help, explain us your probem and tell us what you did before to solve it.
Read first post?
@ref
Simple QHSUSBBULK, I failed at flashing bootloader i think i flashed G2 one instead of G2 Mini
Kaszke said:
@ref
Simple QHSUSBBULK, I failed at flashing bootloader i think i flashed G2 one instead of G2 Mini
Click to expand...
Click to collapse
Then try again with the one for the g2m
How can i reinstall it without any adb and things?
Kaszke said:
How can i reinstall it without any adb and things?
Click to expand...
Click to collapse
I'm pretty sure you can't.
So why u tell me to do that XD
Kaszke said:
So why u tell me to do that XD
Click to expand...
Click to collapse
How did you flash the bootloader of the G2?
Do that again but with the bootloader of the g2m.
In the case you need adb:
https://forum.xda-developers.com/showthread.php?t=2317790
hi
( hex firmware patch) installed this by mistake.! ON MY HONOR 5x
now its hard bricked. can anyone help pls
no screen or charging..
hass57khan said:
hi
( hex firmware patch) installed this by mistake.! ON MY HONOR 5x
now its hard bricked. can anyone help pls
no screen or charging..
Click to expand...
Click to collapse
Use dload method. Check one in my signature. Download the firmware for your model and proceed. Charge the phone for 1 hour and proceed for this.
shashank1320 said:
Use dload method. Check one in my signature. Download the firmware for your model and proceed. Charge the phone for 1 hour and proceed for this.
Click to expand...
Click to collapse
i don't have Huawei recovery installed as I had twrp before so it wort turn on to anything on screen when pressing 3 buttons
hass57khan said:
i don't have Huawei recovery installed as I had twrp before so it wort turn on to anything on screen when pressing 3 buttons
Click to expand...
Click to collapse
No need of Huawei recovery. It should do it automatically with full firmware.
Or you can flash manually.
it doesnt have any connection via usb to(adb) bricked man .
hass57khan said:
it doesnt have any connection via usb to(adb) bricked man .
Click to expand...
Click to collapse
Check multi tool thread in Honor 7 section. Dc phoenix was mentioned somewhere
Hi guys ,
i'm trying to root my samsung A10 but i didn't found a efficient method to do it.
i've tried to root with a tutoriel of A30 but it's not the same thing.
please help !!
thank you :fingers-crossed:
Just came here to find a root method for the SM-A105M. Seems like not a lot of love for the A10 here.. Lol Anyways, I will be testing this method I came across out tonight. I will post the link but can't confirm it's working. I'll post my results tomorrow.
https://rootmydevice.com/root-samsung-galaxy-a10/
So... Did it work?
Sassiest said:
Just came here to find a root method for the SM-A105M. Seems like not a lot of love for the A10 here.. Lol Anyways, I will be testing this method I came across out tonight. I will post the link but can't confirm it's working. I'll post my results tomorrow.
https://rootmydevice.com/root-samsung-galaxy-a10/
Click to expand...
Click to collapse
Because a10 is a crap device and laggy as hell that's why ppl do not buy it.
andrei1412 said:
Because a10 is a crap device and laggy as hell that's why ppl do not buy it.
Click to expand...
Click to collapse
Is not a crappy and laggy device. Your answer is so poor..
Nope.. tried 3 different methods now and so far nothing has worked.. ??
Still nobody found a solution to this problem?
We need the correct Twrp for A10.. anyone can develop it?
help please need root this phone
Do you guys have an OEM unlock toggle available in dev options? If the answer to this is yes, then give me a link to your firmware and I'll try to root it.
I have the OEM unlock button but whenever I tried to Odin Flash it, it says Locked by OEM.
My model is SM-A105G
w.w.w.sammobile.com/samsung/firmware/SM-A105G/
Appreciate if you can help.
Thank you
Spaceminer said:
Do you guys have an OEM unlock toggle available in dev options? If the answer to this is yes, then give me a link to your firmware and I'll try to root it.
Click to expand...
Click to collapse
s_ryan said:
I have the OEM unlock button but whenever I tried to Odin Flash it, it says Locked by OEM.
My model is SM-A105G
w.w.w.sammobile.com/samsung/firmware/SM-A105G/
Appreciate if you can help.
Thank you
Click to expand...
Click to collapse
Make sure usb debugging is enabled, connect your phone to your pc, then check the box that pops up on your phone to let it always allow access from your computer. Also make sure you're using the latest patched Odin. What country is your device from?
I have done all that but still the same. My device is from Singapore.
Spaceminer said:
Make sure usb debugging is enabled, connect your phone to your pc, then check the box that pops up on your phone to let it always allow access from your computer. Also make sure you're using the latest patched Odin. What country is your device from?
Click to expand...
Click to collapse
I read on xda is it possible to root samsung galaxy M20! So, why is not possible to root A10?
s_ryan said:
I have done all that but still the same. My device is from Singapore.
Click to expand...
Click to collapse
Have you had it for at least 7 days? Sometimes there's a temp lock. You might also have a hardware key combo that'll unlock the bootloader. With the device powered off, hold Vol ↑ + Vol ↓ and plug it into your pc. When download mode shows up, hold Vol ↑ for about 30sec to 1min. If it works it'll wipe your data, then automatically reboot and you'll be unlocked for flashing. If this doesn't work, I'll have to look at your bootloader.img and see if there's a different combo in there. (It's possible that there's none.)
Andreas197 said:
I read on xda is it possible to root samsung galaxy M20! So, why is not possible to root A10?
Click to expand...
Click to collapse
If we can get Odin to flash anything that isn't signed by Samsung, then yeah it should be possible.
I own SM-A105FN from italy.
I got this phone from someone else and he had it for more then 2 months now. I understand that for Xiaomi, u need to wait for certain period of time before you could flash it, does Samsung have it too? I tried the powered off, hold down Vol up and down + power button, but nothing happened for me. Is there a way to extract the bootloader.img for you to inspect?
Thanks dude for checking out!
Spaceminer said:
Have you had it for at least 7 days? Sometimes there's a temp lock. You might also have a hardware key combo that'll unlock the bootloader. With the device powered off, hold Vol ↑ + Vol ↓ and plug it into your pc. When download mode shows up, hold Vol ↑ for about 30sec to 1min. If it works it'll wipe your data, then automatically reboot and you'll be unlocked for flashing. If this doesn't work, I'll have to look at your bootloader.img and see if there's a different combo in there. (It's possible that there's none.)
If we can get Odin to flash anything that isn't signed by Samsung, then yeah it should be possible.
Click to expand...
Click to collapse
Spaceminer said:
Do you guys have an OEM unlock toggle available in dev options? If the answer to this is yes, then give me a link to your firmware and I'll try to root it.
Click to expand...
Click to collapse
Hi, did you manage to root SM-A105F device ?
Someone tryed this bootloader unlock procedure?
Wow.. thanks for the video, I will try to flash it with Odin later.. I tried with the power previously hence why It did not work.
Andreas197 said:
Someone tryed this bootloader unlock procedure?
Click to expand...
Click to collapse
can someone please help hard bricked brand new moto edge nothing will do anything no matter what try black screen. i'll pay someone to help please!! thanks
ThirteenSeasons said:
can someone please help hard bricked brand new moto edge nothing will do anything no matter what try black screen. i'll pay someone to help please!! thanks
Click to expand...
Click to collapse
If you have a pc, see if it's in EDL Mode
Is my device in EDL Mode?
sd_shadow said:
If you have a pc, see if it's in EDL Mode
Is my device in EDL Mode?
Click to expand...
Click to collapse
it is so how do i fix please???!!1 i'll legit pay you whatever want lol
sd_shadow said:
If you have a pc, see if it's in EDL Mode
Is my device in EDL Mode?
Click to expand...
Click to collapse
it is how do i fix
ThirteenSeasons said:
it is so how do i fix please???!!1 i'll legit pay you whatever want lol
Click to expand...
Click to collapse
??
ThirteenSeasons said:
it is how do i fix
Click to expand...
Click to collapse
You have 2 possible options
1. You can wait several days for the battery to die, then connect to a wall charger.
It may boot normally, this is the safest thing to try.
2. Use a blankflash there is one available for XT2061(burton) devices
https://mirrors.lolinet.com/firmware/moto/burton/blankflash/
download the blankflash, unzip it and
run the blank-flash.bat
If the blankflash works, the device will reboot, you may need to reflash firmware with fastboot or LMSA
sd_shadow said:
You have 2 possible options
1. You can wait several days for the battery to die, then connect to a wall charger.
It may boot normally, this is the safest thing to try.
2. Use a blankflash there is one available for XT2061(burton) devices
https://mirrors.lolinet.com/firmware/moto/burton/blankflash/
download the blankflash, unzip it and
run the blank-flash.bat
If the blankflash works, the device will reboot, you may need to reflash firmware with fastboot or LMSA
Click to expand...
Click to collapse
I accidently flashed moto g power into it when it's edge +... What if neither of those fix it? It's been unplugged for days. Idk if the bttrys dead cause no screen... Do you think fixable ?
ThirteenSeasons said:
I accidently flashed moto g power into it when it's edge +... What if neither of those fix it? It's been unplugged for days. Idk if the bttrys dead cause no screen... Do you think fixable ?
Click to expand...
Click to collapse
Ok, that's info you should have shared first.
Letting the battery die won't help.
Your only option is blank flash, but no guarantee that it'll work.