hi
( hex firmware patch) installed this by mistake.! ON MY HONOR 5x
now its hard bricked. can anyone help pls
no screen or charging..
hass57khan said:
hi
( hex firmware patch) installed this by mistake.! ON MY HONOR 5x
now its hard bricked. can anyone help pls
no screen or charging..
Click to expand...
Click to collapse
Use dload method. Check one in my signature. Download the firmware for your model and proceed. Charge the phone for 1 hour and proceed for this.
shashank1320 said:
Use dload method. Check one in my signature. Download the firmware for your model and proceed. Charge the phone for 1 hour and proceed for this.
Click to expand...
Click to collapse
i don't have Huawei recovery installed as I had twrp before so it wort turn on to anything on screen when pressing 3 buttons
hass57khan said:
i don't have Huawei recovery installed as I had twrp before so it wort turn on to anything on screen when pressing 3 buttons
Click to expand...
Click to collapse
No need of Huawei recovery. It should do it automatically with full firmware.
Or you can flash manually.
it doesnt have any connection via usb to(adb) bricked man .
hass57khan said:
it doesnt have any connection via usb to(adb) bricked man .
Click to expand...
Click to collapse
Check multi tool thread in Honor 7 section. Dc phoenix was mentioned somewhere
Related
My moto e is not starting not charging after the battery is completely to 0%
i removed and placed but also no use
not starting/charging
no boot logo and no battery charging logo
plz tell me what to do???
never shown display
.When I connect charger to it to my laptop, white led blinks for 1 second.. It shown qhsusb_bulk device. I updated its driver successfully with Qualcomm HS-USB QLoader 9008.
I am very sorry to say but your phone is hard bricked. You must have tried downgrading/upgrading firmware in a fatal pathway. Only thing you can do is getting your motherboard replaced.
nilanko said:
I am very sorry to say but your phone is hard bricked. You must have tried downgrading/upgrading firmware in a fatal pathway. Only thing you can do is getting your motherboard replaced.
Click to expand...
Click to collapse
sir plz tell me how to do it ...?
Go to service centre for a new motherboard!
vsaik1999 said:
My moto e is not starting not charging after the battery is completely to 0%
i removed and placed but also no use
not starting/charging
no boot logo and no battery charging logo
plz tell me what to do???
never shown display
.When I connect charger to it to my laptop, white led blinks for 1 second.. It shown qhsusb_bulk device. I updated its driver successfully with Qualcomm HS-USB QLoader 9008.
Click to expand...
Click to collapse
sir how to downgrading/upgrading firmware without entering into fastboot mode
hi!
vsaik1999 said:
sir how to downgrading/upgrading firmware without entering into fastboot mode
Click to expand...
Click to collapse
there's one post here, need jflash drivers (box) and flash with USB
i don't you how to but i did it in a nokia...
vsaik1999 said:
sir how to downgrading/upgrading firmware without entering into fastboot mode
Click to expand...
Click to collapse
Using custom recovery such as TWRP and then flashing TWRP-flashable firmware which you can find on the forums.
marianoasis said:
there's one post here, need jflash drivers (box) and flash with USB
i don't you how to but i did it in a nokia...
Click to expand...
Click to collapse
It does not work. Unbricking Moto E is not possible
nilanko said:
Using custom recovery such as TWRP and then flashing TWRP-flashable firmware which you can find on the forums.
It does not work. Unbricking Moto E is not possible
Click to expand...
Click to collapse
sir it is not "on"ing and it not going into fastboot also
vsaik1999 said:
sir it is not "on"ing and it not going into fastboot also
Click to expand...
Click to collapse
It won't because its hard bricked. U need a new motherboard.
nilanko said:
Using custom recovery such as TWRP and then flashing TWRP-flashable firmware which you can find on the forums.
It does not work. Unbricking Moto E is not possible
Click to expand...
Click to collapse
It is possible. Search for the thread by Lucas Eugene for unbricking moto e.
Hit Thanks if I Helped!!!
PoseidonKing said:
It is possible. Search for the thread by Lucas Eugene for unbricking moto e.
Hit Thanks if I Helped!!!
Click to expand...
Click to collapse
I followed his guide and after that, my computer stopped detecting my phone completely, not even that "bulk" thing anymore. It was totally dead.
Actually I don't think you phone is bricked because the same thing is happening to me too but I kepp on removing and disconnecting till the phone starts boot animation so not a brick by the way did you flash any roms?? Cause I'm running mm rom BTW this problem recently started with me so I'm looking for better suggestion s
What did you do to your phone before this happened?
This event occurred when my phone was completely at 0%.
The solution was to just keep it charging overnight like plugged in.
May or may not work for you.
Hi,
i also brocked my Note 3...
After updating with SP Flash tools 1516 my phone does not show any sign of life...
I flashed the last chinese stable from xiaomi and SP flash finished with the green hook
Now the phone does not boot, the screen is black and if connected to the charger there is
no red light and i dont know if it charges at all
I can still repeat flashing the phone but to no avail. Connecting the phone to
usb while holding VOL +, Vol - and power there is "connecting and disconnecting"
sound from WIN7.
However Miflash does not recognize the phone anymore.
Could it be that there is a problem with the locked bootloader ?
I read some threads on Mi4 phones where they had to shorten some testpoints on the motherboard
to get the phone back to life, maybe there is a similar way for the Note 3?
I already did a lot of successfull flashing with other phones so i didnt expect any sort of problems....
Any help is really appreciated !!
Greetings
Joachim
Same problem here
Redmi Note 3 came with some unoffical multi language ROM preinstalled (7.00.11.00)
OTA did not work, downloading update onto the phone and updating via Update-App did not work either, so there was no other way than using SP Flashtool to get some official ROM on it
Downloaded official 7.0.19.0 and loaded it into SP Flashtool => Flashing went without any fault (green hook at the end) but phone doesnt do anything since then
You should untick the first option in flashtool (preloader). I had the same problem once. Here is a video which helped me and saved me device. Follow the instructions and you'll be ok. https://www.youtube.com/watch?v=A3TmXtOA0IA
arist1976 said:
You should untick the first option in flashtool (preloader). I had the same problem once. Here is a video which helped me and saved me device. Follow the instructions and you'll be ok. https://www.youtube.com/watch?v=A3TmXtOA0IA
Click to expand...
Click to collapse
It's work yes or no ? I have the same problem
same issue
i need ur help. My Redmi note 3g (Mediatek - Global rom) was stuck up at logo. When i tried flashing it using SP flash tool , i got error that "pmt changed for the rom it must be downloaded". Then i have seen some youtube videos and read forums . As per their instruction i have first forrmated using "Auto Format flash" and then did "Format all+ Download" . Now my phone is not starting.
No fastboot, no charging , No recoery mode. Only i am able to run same process again.
I am average user so dont know much about such process.. Can you guys plz help me what to do?
jalsa_100 said:
i need ur help. My Redmi note 3g (Mediatek - Global rom) was stuck up at logo. When i tried flashing it using SP flash tool , i got error that "pmt changed for the rom it must be downloaded". Then i have seen some youtube videos and read forums . As per their instruction i have first forrmated using "Auto Format flash" and then did "Format all+ Download" . Now my phone is not starting.
No fastboot, no charging , No recoery mode. Only i am able to run same process again.
I am average user so dont know much about such process.. Can you guys plz help me what to do?
Click to expand...
Click to collapse
It was a big mistake selecting "format all" option. Now everything inside your phone is deleted (including IMEI). Big problem. Who suggested you to do this?
arist1976 said:
It was a big mistake selecting "format all" option. Now everything inside your phone is deleted (including IMEI). Big problem. Who suggested you to do this?
Click to expand...
Click to collapse
i have seen some youtube videos and forums mentioning to do the same. what is the solution now?
arist1976 said:
It was a big mistake selecting "format all" option. Now everything inside your phone is deleted (including IMEI). Big problem. Who suggested you to do this?
Click to expand...
Click to collapse
jalsa_100 said:
i have seen some youtube videos and forums mentioning to do the same. what is the solution now?
Click to expand...
Click to collapse
I was in the same boat as you. The only way to revive my RN3 was to select format and download otherwise it would not turn on. I then experienced the no imei issue as you are. When I did was follow a guide which I got from en.miui.com under tips and tutorials for Redmi Note 3 where it says to permanent fix imei and worked. I never lose my imei now
help
Zehlek said:
I was in the same boat as you. The only way to revive my RN3 was to select format and download otherwise it would not turn on. I then experienced the no imei issue as you are. When I did was follow a guide which I got from en.miui.com under tips and tutorials for Redmi Note 3 where it says to permanent fix imei and worked. I never lose my imei now
Click to expand...
Click to collapse
What should i do now? will my RN3 will start again? Can u plz help?
jalsa_100 said:
What should i do now? will my RN3 will start again? Can u plz help?
Click to expand...
Click to collapse
Is it SD or MTK?
HELP
Zehlek said:
Is it SD or MTK?
Click to expand...
Click to collapse
MTK
jalsa_100 said:
MTK
Click to expand...
Click to collapse
This is what I did which worked for me
- First I downloaded so flash file
-Selected format and download in spflash
-It final booted up and I had lost Imei
-When it gets to Mi Account setup I had to select skip
-I followed THIS GUIDE
Zehlek said:
This is what I did which worked for me
- First I downloaded so flash file
-Selected format and download in spflash
-It final booted up and I had lost Imei
-When it gets to Mi Account setup I had to select skip
-I followed THIS GUIDE
Click to expand...
Click to collapse
Thanks for sharing info but its for RN3 whereas my phone is RN3G Redmi note 3G.
hi i have do any thing here(https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274)
say to enable my honor 5 x otg i had installed a kernel then my phone break and do not boot when it had been restarted
what shoud i do?
violonkabod said:
hi i have do any thing here(https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274)
say to enable my honor 5 x otg i had installed a kernel then my phone break and do not boot when it had been restarted
what shoud i do?
Click to expand...
Click to collapse
dload flash the stock software back to the phone
you need to know what your phone software was KIW-L??C???
then you can search for the correct software for your phone
Hello, i got a big problem and needed HELP!
Today i got my Note 4...
so i tryed to unlock the bootloader, bad thing did not logg in at the device.
i booted the mobile in fastboot mode and started the official unlock tool.
until 50% it went quite well then i got an error message:
couldn't verify device
current account is differnet from the account info on the device
so i tryed to boot again but was in a bootloop...
i tryed also flashing a new rom (nikel_global_images_7.4.14_20170414.0000.00_6.0_global_b5d5f15e0e.tgz) and again i got an error
"flash boot error"
hope somebody can help
p.s. sorry for my poor english
Following
Did you read this?
dao80 said:
...i tryed also flashing a new rom (nikel_global_images_7.4.14_20170414.0000.00_6.0_global_b5d5f15e0e.tgz) and again i got an error...
Click to expand...
Click to collapse
Are you sure you are using MTK Variant?
akil777 said:
Did you read this?
Are you sure you are using MTK Variant?
Click to expand...
Click to collapse
yes im sure, i tryed this already and still in bootloop
althoug it says download ok
dao80 said:
yes im sure, i tryed this already and still in bootloop
althoug it says download ok
Click to expand...
Click to collapse
Did you use Sp flash tool?, if yes You should tick all except preloader. You will have to wait 5-15mins for the phone to boot up.
akil777 said:
Did you use Sp flash tool?, if yes You should tick all except preloader. You will have to wait 5-15mins for the phone to boot up.
Click to expand...
Click to collapse
yes i used this tool, after rebooting the mi logo is on the screnn for about 7 secounds then the mobile boots again and again...
;(
dao80 said:
yes i used this tool, after rebooting the mi logo is on the screnn for about 7 secounds then the mobile boots again and again...
;(
Click to expand...
Click to collapse
I have never experienced that.. I think you should send it to your mobile repair center.. Be patient,, It might take few days. Don't panic,
akil777 said:
I have never experienced that.. I think you should send it to your mobile repair center.. Be patient,, It might take few days. Don't panic,
Click to expand...
Click to collapse
i m already looking for a mobile repair center here who can repair xiaomi mobiles...
but so fare all numbers i called are not in service anymore or dont repair xiaomi...
dao80 said:
i m already looking for a mobile repair center here who can repair xiaomi mobiles...
but so fare all numbers i called are not in service anymore or dont repair xiaomi...
Click to expand...
Click to collapse
check this http://en.miui.com/thread-491655-1-1.html
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
robjbw said:
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
Click to expand...
Click to collapse
yes i tried china and global
but only bootloop
but to be on the save side, where to i find a the stock rom (flashable with the miflashtool)?
dao80 said:
yes i tried china and global
but only bootloop
but to be on the save side, where to i find a the stock rom (flashable with the miflashtool)?
Click to expand...
Click to collapse
flash done with mi flash? If got error then try with deep flash cable. see yt tutorials
itsmedRb said:
flash done with mi flash? If got error then try with deep flash cable. see yt tutorials
Click to expand...
Click to collapse
deepflash is also possible for mtk devices?
robjbw said:
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
Click to expand...
Click to collapse
tried it again with the mi flash tool i got following error
80x80004005: FAILED (remote: download for partition 'boot' is not allowed
Hey Guys, i soveld the problem...
AND F**K it was a quite easy solution...
i tried so hard was crying and a kind of very desperate...
anyways i aslo wrot a mail to mi and they did not help at all...
they even say i should lock in at the device if im in a bootloop, kinda funny?
anyways so i drained the batterie and nearly about to give up this device....
BUT i give it one last try, plugt it in and booted it... it took a while but after a while i finaly was able to boot the Phone and set it up...
so this threat can be closed...
thank you guys for your help
Hu,
please help me. I tried to downgrade from9.0.0.162 c462 to emui 8.1 and my phone bricked .There was an erreor during flashiing. That wasnt my first time flashing this phone. . If i connect to PC only fastboot on multitool. It recognized it as Fastboot COL-L29.The screen is totally black. Could someone help me? I have no idea to unbrick it
You could try the erecovery or the dload for the exact same firmware you were on. You should've searched on this because downgrade from EMUI 9 to EMUI 8 not advisable and many bricked their phone. Try above, if no success, let me know
Erecovery do not work. For dload as I know i should have to have otg cable yes?
Ziomall123 said:
Erecovery do not work. For dload as I know i should have to have otg cable yes?
Click to expand...
Click to collapse
You can try dload with sd card as well.
but honor 10 have only sim cards?? no sd card slot
Ziomall123 said:
but honor 10 have only sim cards?? no sd card slot
Click to expand...
Click to collapse
Yup. Forgot. My bad
So I have to buy otg cable and try to flash with it?
Ziomall123 said:
Hu,
please help me. I tried to downgrade from9.0.0.162 c462 to emui 8.1 and my phone bricked .There was an erreor during flashiing. That wasnt my first time flashing this phone. . If i connect to PC only fastboot on multitool. It recognized it as Fastboot COL-L29.The screen is totally black. Could someone help me? I have no idea to unbrick it
Click to expand...
Click to collapse
How did you try to downgrade in the first place?
By using hisuite or by any other method?
I was used hupdater before and ewerything was ok. Yesterday i tried this method and flashing was failed. Now only Multitool show fastboot col-l29. Only red led blinking.
Ziomall123 said:
I was used hupdater before and ewerything was ok. Yesterday i tried this method and flashing was failed. Now only Multitool show fastboot col-l29. Only red led blinking.
Click to expand...
Click to collapse
Which build of emui 8 did you flash. You must have tried hisuite downgrade method.
Jest but only multitool recognize my phone. In multitool there is only info aout version of android bootloader unlockerd but no imei. Hisuite can not recognize it. It start when i connect phone to pc but that all. I do not know what i can do more
Ziomall123 said:
Jest but only multitool recognize my phone. In multitool there is only info aout version of android bootloader unlockerd but no imei. Hisuite can not recognize it. It start when i connect phone to pc but that all. I do not know what i can do more
Click to expand...
Click to collapse
You didn't answer what build you flashed?
It might be due to different xloader version?
[Firmware] COL-L29 C432B151(8.1.0.151)
Ziomall123 said:
[Firmware] COL-L29 C432B151(8.1.0.151)
Click to expand...
Click to collapse
151 has two variants one is normal update and other is downgrade package. Which did you use?
There is one thread by me about hard bricks info in H10 forum check that thread and cross verify the xloaders .
What is exact position of your device?
Does fastboot work?
Erecovery work?
Hi that was probably downgrade package full. Now my phone only turn on in fastboot. Erecovery do not work screen is only black. Could you give me link to the thread with unbricking phone?