Related
Can anyone please help me with this? I have HTC Sensation with CM10. This tablet without root is uselles...
Anyone?
How did you put CM10 on it without root?
post-mortem said:
How did you put CM10 on it without root?
Click to expand...
Click to collapse
Read carefully what I wrote.
I have HTC Sensation with cm10. Its my dailly driver.
Goclever R75 i bought becouse it was cheap But what is android without root? And I cant get any information about that on this tablet...
No one know how to do that?
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
is it function? no problems?
Yes this works. Ive done this 2 times
Hi! Can you please tell me how to instal drivers from that package?
If u dont know how 2 do that... Please do not root your device!
devgron said:
If u dont know how 2 do that... Please do not root your device!
Click to expand...
Click to collapse
Hi again, thanks for your concern but it's not my first time when a try to root a device. I have a sony x8 rooted and a rom on it but never needed to instal something like that to root so can you please tell me how do i get over that spep? Sorry for my english.
devgron said:
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
Click to expand...
Click to collapse
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Kurjak78 said:
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Click to expand...
Click to collapse
Hi, I have same problem. Did you get fix for this??
zefer79 said:
Hi, I have same problem. Did you get fix for this??
Click to expand...
Click to collapse
No. Fortunately I was able to exchange it for the new one.
Kurjak78 said:
No. Fortunately I was able to exchange it for the new one.
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
orlairet conde
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
bugxyz said:
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
Click to expand...
Click to collapse
Kurjak78 said:
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
Click to expand...
Click to collapse
Hello!
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
WIFI not working and sensor keys bad workimg
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
xxxx
I hope it helps you.
Bye.
Click to expand...
Click to collapse
:/ after install to "bricked" goclever tab r75 android from link xxx provided by bugxyz android run. .. wifi not working and senzor keys are shifted please help me :/ sorry for my bad english i am czech and the screen is shifted
Hello.
If you have those problems it means that you have an goclever tab 7500 and not an R 75. I saw that some contries 7500 was sold as R 75.
I had the same problem as you when I have flashed my R 75 with 7500 firmware.
I will upload also the 7500's firmware and provide the link when it is uploaded.
I hope this will help you.
Ps: 7500 firmware is unrooted.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
Sent from my LG-P990 using Tapatalk
thx
Thank you very much, it helped. how should I do to make me root it got broken again
declara kvide
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
I hope it helps you.
Bye.
Click to expand...
Click to collapse
Bugxyz, you are a savior. Thank you.
I was using XZXperience 2 on my Sony Xperia S, and then sony companion detected that i had firmware 6.1.A.1.45 and 6.1.A.55 was available, so just to give it a try, I installed that update, but that is a failed update, it says unfortunately music player stopped working, or unfortunately xperia keyboard stopped working etc. The main problem is that my system does not recognize my XS anymore, it says USB Device Not Recognized, so I cant connect it to Flashtool or PC Companion for repair. The Sad part is that I cant even connect it in Flash Mode, I tried a hard reset by using power button and volume up buttons, but no use. I should mention that once it recognized my phone when i turned off my laptop and removed its battery too, after restarting both phone and laptop, flashtool detected that phone was connected with USB Debugging OFF, though it was on, but as a try, I unchecked USB Debugging and then checked it again, and it worked. Now my Xperia S was connected in USB debugging mode, I tried to install busybox, rooted it, and tried to install CWM recovery,flashtool said that busy box was installed and phone was rooted, but it could not install recovery and I used another tool to install recovery,which had a bat file and it installs recovery automatically. But it didnt. After restarting my phone, the same issue appeared again, My PC does not recognize my Xperia S, tried previous procedure several times, but no use. Cant even repair it as my set cant go in flash mode. What can I do? have I bricked my Xperia S? I`m in Pakistan and there is no official Sony Mobile franchise as they dont launch their flagships in Pakistan. Please help me, considering I`m used to with rooting,flashing etc. How can I connect my phone in flash mode? Thank you.
Thanx
Sewrizer said:
It looks like another strike from the productors. They usually send you malicious updates which cause your device to stop working. This only happens to rooted phones which run custom roms. And since the rooted users only flash their roms in zip format, sending an OTA update patch(designed for stock rom) to a custom rom can only lead to a malfunction. I am not sure whether or not sony did that on purpose, but the truth is that after installing a custom rom NEVER do OTA updates(unless they are from the rom's developer).
If you want an update check your rom's thread and there may be new flashable versions.
As for making your device work, the only thing you can do is to call technical support or go to a phone service(in my country they are called gsm services, and they fix mostly everything, both hardware and software. Some even claim to be able to fix water damage) but given that your warranty is voided, you will have to pay for the reparations. I guess they will only do a re-soft(delete everything, and install the stock version, you may lose your root, i am not sure here.)
I hope this helps, this is how we fix things like this in our country, so it will work in your case too, hopefully.
Sent from Area 51 using my HTC Sensation XE, hit thanks if I helped
Click to expand...
Click to collapse
Thanx for your advice. I was almost hopeless, but after spending continous 16 hours, I`m now able to get a solution. I got another data cable, removed battery of my laptop, and made a hard reset to my phone, and after 10-15 min I tried again, and Thanx GOD, it detected my phone, so I hurriedly start repair my phone option and connected my phone in flash mode which was successful and that was not less than a miracle, because i`ve been repeating same procedure and it was not working, this time luckily it worked, now i`m using stock rom with firmware 6.1.A.2.55. Now I would either wait for official Sony JB Update or I would flash a custom ROM XZXperience 2, which I found awsome, as it had no bugs, and it improved battery and sound quality was significantly imrpove + Bravia Engine 2 with improved graphics. I would ask users to not to give up hope, there is always a solution to every problem.
device not recognized
jibraiel.hassan said:
Thanx for your advice. I was almost hopeless, but after spending continous 16 hours, I`m now able to get a solution. I got another data cable, removed battery of my laptop, and made a hard reset to my phone, and after 10-15 min I tried again, and Thanx GOD, it detected my phone, so I hurriedly start repair my phone option and connected my phone in flash mode which was successful and that was not less than a miracle, because i`ve been repeating same procedure and it was not working, this time luckily it worked, now i`m using stock rom with firmware 6.1.A.2.55. Now I would either wait for official Sony JB Update or I would flash a custom ROM XZXperience 2, which I found awsome, as it had no bugs, and it improved battery and sound quality was significantly imrpove + Bravia Engine 2 with improved graphics. I would ask users to not to give up hope, there is always a solution to every problem.
Click to expand...
Click to collapse
I have sony xperia s.....before it was working perfectly fine but than suddenly i got message on my laptop usb device not recognized.. i have not rooted my phone than also.. since then m suffering from it and transferring files via wi fi... please help me.. i tried almost every thing.. but i dont know how to perform hard reset.... and what kind of new data cable are u talking about..as i bought this phone from other country so sony service center is not entertaining....
pratik1315 said:
I have sony xperia s.....before it was working perfectly fine but than suddenly i got message on my laptop usb device not recognized.. i have not rooted my phone than also.. since then m suffering from it and transferring files via wi fi... please help me.. i tried almost every thing.. but i dont know how to perform hard reset.... and what kind of new data cable are u talking about..as i bought this phone from other country so sony service center is not entertaining....
Click to expand...
Click to collapse
Get a new data cable, fortunately almost all phone now a days have same data cable, u can try data cable of some HTC, Samsung, Blackberry or even Iphone`s data cable. Secondly, u must turn off your PC, and remove its power source, if it is laptop then also remove its battery. Then after 5-10 minutes, turn on your PC and connect the phone. Also try installing drivers, which u can by using PC Companion. You can also install drivers by using FlashTool. Download it and extract it, then go to the installation folder and look for folder "Drivers" open it and u will see an exe file. Just run it and select Xperia S and follow the instructions.
maybe not new usb cable sometimes usb port is broken
Hey, I had the same problem a few time ago, you can try to restore with flashtool, if you can still get in to flash mode
Sony xperia S not starting
Plzzzz help I m realy worried
few months back i had unlocked the bootloader of my xperia s and flashed CWM 10 on it...Now i Thought of locking the bootloader and to get official updates...i locked the bootloader directly by using flash tool....after i locked it and tried to turn on the phone it is not turning on...a green light just flashes once and the phone vibrates once after that nothing happens...plzzz helppp
elegantuser29 said:
Plzzzz help I m realy worried
few months back i had unlocked the bootloader of my xperia s and flashed CWM 10 on it...Now i Thought of locking the bootloader and to get official updates...i locked the bootloader directly by using flash tool....after i locked it and tried to turn on the phone it is not turning on...a green light just flashes once and the phone vibrates once after that nothing happens...plzzz helppp
Click to expand...
Click to collapse
-.-
There's nothing strange: you are using a custom kernel and you have locked bootloader
It's impossible it could work
You need to flash official stock rom to boot up
Sent from my LT26i using xda app-developers app
Phone responded
mirhl said:
-.-
There's nothing strange: you are using a custom kernel and you have locked bootloader
It's impossible it could work
You need to flash official stock rom to boot up
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
the phone has responded and is working now...i unlocked the boodloader using cmd..and the phone worked...One Thing plzz tell that i want to bring my phone to stock ics from sony..and want to get the OTA update...is it possible??
elegantuser29 said:
the phone has responded and is working now...i unlocked the boodloader using cmd..and the phone worked...One Thing plzz tell that i want to bring my phone to stock ics from sony..and want to get the OTA update...is it possible??
Click to expand...
Click to collapse
Since you CAN'T use custom kernels with locked bootloader (and so, no cm10)
You only need to flash stock rom and then relocking your bootloader
http://forum.xda-developers.com/showthread.php?p=23180725
Sent from my LT26i using xda app-developers app
I am also having the same problem
I have sony Xperia S. I updated to the latest stock firmware version(6.2.B.1.96). after this update I rooted my phone using old kernel .200 and update the firmware's kernel again to stock after that I locked the boot loader again. Now I can't use memory stick that I used to use before with OTG cable. And now, if I am trying to enter flash mode by pressing volume down key, the led turn green for a while only about 10 sec while this was happening, my pc say that USB device not recognized. So, now I can't use flashtool or sony update service tool(SUS) as well.
Now I am using stock .96 rom with no error but I want to install CWM and also want to unlock boot loader again to test some custom roms.
Pls help me what I have to do and what should. I am now in Delhi.
aungthumoe said:
I have sony Xperia S. I updated to the latest stock firmware version(6.2.B.1.96). after this update I rooted my phone using old kernel .200 and update the firmware's kernel again to stock after that I locked the boot loader again. Now I can't use memory stick that I used to use before with OTG cable. And now, if I am trying to enter flash mode by pressing volume down key, the led turn green for a while only about 10 sec while this was happening, my pc say that USB device not recognized. So, now I can't use flashtool or sony update service tool(SUS) as well.
Now I am using stock .96 rom with no error but I want to install CWM and also want to unlock boot loader again to test some custom roms.
Pls help me what I have to do and what should. I am now in Delhi.
Click to expand...
Click to collapse
To unlock the bootloader you need to enter fastboot (blue led) with vol+ during the boot, not vol-
Or you can also reboot the phone from adb with
adb reboot bootloader
If phone still doesn't stick to fastboot, it has to be a driver problem
There are lots of guide on the procedure (which is really hard on windows 8)
Sent from my noobish GT-I9100 using xda app-developers app
Yes i use windows 8.1
mirhl said:
To unlock the bootloader you need to enter fastboot (blue led) with vol+ during the boot, not vol-
Or you can also reboot the phone from adb with
adb reboot bootloader
If phone still doesn't stick to fastboot, it has to be a driver problem
There are lots of guide on the procedure (which is really hard on windows 8)
Sent from my noobish GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Yes I use windows 8.1
now. I can't use memory stick with OTG cable but I can only use mouse or keyboard with OTG cable. I don't know why?
I can access fastboot mode but I can't access flash mode. pc said that device not recognized. so, I think it is device error.
aungthumoe said:
Yes I use windows 8.1
now. I can't use memory stick with OTG cable but I can only use mouse or keyboard with OTG cable. I don't know why?
I can access fastboot mode but I can't access flash mode. pc said that device not recognized. so, I think it is device error.
Click to expand...
Click to collapse
I dont really understand what you did
But my advice is: unlock your BL and enjoy the magic of aosp ROMs (magic included inside doomkernel for stock sony is fine too)
Sent from my noobish GT-I9100 using xda app-developers app
Bricked my phone - please help!
Hi,
I think I bricked my Xperia S. I already had cyanogen 10 on my phone, so I thought I could just flash the new Cyanogen 11 4.4.2 ROM and GAPPS over top. I followed the instructions but I skipped the Fastboot step. I cleared the cache and system and then went ahead with the ROM and GAPPS. Once the ROM and GAPPS were installed, I selected "Reboot" and the phone turned off and now it won't boot at all. If I hold the power button, I get a faint vibration and if I hold the up volume and power I get the 3 vibration sequence but no boot. Please help!
This is what I was using:
http://forum.xda-developers.com/showthread.php?t=2555243
hi
( hex firmware patch) installed this by mistake.! ON MY HONOR 5x
now its hard bricked. can anyone help pls
no screen or charging..
hass57khan said:
hi
( hex firmware patch) installed this by mistake.! ON MY HONOR 5x
now its hard bricked. can anyone help pls
no screen or charging..
Click to expand...
Click to collapse
Use dload method. Check one in my signature. Download the firmware for your model and proceed. Charge the phone for 1 hour and proceed for this.
shashank1320 said:
Use dload method. Check one in my signature. Download the firmware for your model and proceed. Charge the phone for 1 hour and proceed for this.
Click to expand...
Click to collapse
i don't have Huawei recovery installed as I had twrp before so it wort turn on to anything on screen when pressing 3 buttons
hass57khan said:
i don't have Huawei recovery installed as I had twrp before so it wort turn on to anything on screen when pressing 3 buttons
Click to expand...
Click to collapse
No need of Huawei recovery. It should do it automatically with full firmware.
Or you can flash manually.
it doesnt have any connection via usb to(adb) bricked man .
hass57khan said:
it doesnt have any connection via usb to(adb) bricked man .
Click to expand...
Click to collapse
Check multi tool thread in Honor 7 section. Dc phoenix was mentioned somewhere
So my phone just got stuck while normal usage. Tried restarting and the phone began boot looping.
Did plenty of research and finally decided to flash. Tried to flash using mi flash in fastboot mode but failed then google search made me realise my bootloader was locked. Did more research and decided to flash using test point EDL method.
Things went pretty well and the flash (miui v8) and the process became successful and when I powered my device the phone went back to boot loop again.
Tried flashing again and the result was the same.
It would be really helpful if somebody could actually help clear the issue. Did pretty much everything I could do as a newbie to flashing.
thank you!
There are 2 varients of rn4 one is mediatek(note 4x) and the other is Snapdragon so check if u flashed right firmware
thisbearisdrunk said:
There are 2 varients of rn4 one is mediatek(note 4x) and the other is Snapdragon so check if u flashed right firmware
Click to expand...
Click to collapse
No, I have flashed the correct file(Mido) and the flashing process went quite well but the problem still exists.
M i L i N said:
No, I have flashed the correct file(Mido) and the flashing process went quite well but the problem still exists.
Click to expand...
Click to collapse
How is ur phone being recognised in mi flash tool?
A serial number appears or something else like "com_port" appears?
thisbearisdrunk said:
How is ur phone being recognised in mi flash tool?
A serial number appears or something else like "com_port" appears?
Click to expand...
Click to collapse
It's recognised as COM4 the first time I tried then sometimes when I connect it shows COM3.
M i L i N said:
It's recognised as COM4 the first time I tried then sometimes when I connect it shows COM3.
Click to expand...
Click to collapse
If it recognises ur phone like that then flashing does nothing to ur phone so the only way is to go into edl mode and then flashing
https://forum.xda-developers.com/re...ool-redmi-note-4-edl-mode-o-removing-t3684024
Use this tool to go into edl mode and then flash
This thread can help ,because i bricked my phone once without unlocking the bootloader and the miflashtool recognised my phone like how it recognised urs and this thread saved my phone
Good luck
Hi, my BQ Aquaris U2 Lite won't boot, I unlocked its bootloader and when I restart it, it is stuck at the next screen:
Your device software can't be checked for corruption. Please lock the bootloader.
If no key pressed:
Your device will boot in 5 seconds
But nothing happens, it stays there.
Help please, thank you.
@help38
The first time that an Android device boots up, the bootloader ( the Android counterpart to Windows BIOS/UEFI ) starts running. It is basically a software program that contains a list of OS instructions to ensure the smooth functioning of the device. Once this bootloader is unlocked, the user can manually change what ROM image was set as default by the OEM, and customize the device according to its liking.
Simply unlocking the bootloader does NOTHING than the Android OS now is waiting for instruction what ROM to load and run
jwoegerbauer said:
@help38
The first time that an Android device boots up, the bootloader ( the Android counterpart to Windows BIOS/UEFI ) starts running. It is basically a software program that contains a list of OS instructions to ensure the smooth functioning of the device. Once this bootloader is unlocked, the user can manually change what ROM image was set as default by the OEM, and customize the device according to its liking.
Simply unlocking the bootloader does NOTHING than the Android OS now is waiting for instruction what ROM to load and run
Click to expand...
Click to collapse
Hi, thank you, but my phone is stuck at that screen and nothing happens, I can't boot Android, do you know what is happening?
I unlocked the bootloader with BQ Firmware Flash Tool, because the phone only loaded Android Recovery, and didn't boot up the OS.
I only want to recover my files and photos
Thank you again.
@help38
I think you've to flash a Custom ROM. Note that's only possible if USB debugging got enabled on phone before unlocking the bootloader took place.
jwoegerbauer said:
@help38
I think you've to flash a Custom ROM. Note that's only possible if USB debugging got enabled on phone before unlocking the bootloader took place.
Click to expand...
Click to collapse
How can I do that?
I didn't have USB debugging enabled, aren't there any other ways to recover my files?
Thank you.
help38 said:
How can I do that?
I didn't have USB debugging enabled, aren't there any other ways to recover my files?
Thank you.
Click to expand...
Click to collapse
No other methods, AFAIK
Even doing a Factory Reset doesn't relock the bootloader.
BTW: The 1st thing of all things an Android user should do is to enable USB debugging on his phone: that makes it all easier.
jwoegerbauer said:
No other methods, AFAIK
Even doing a Factory Reset doesn't relock the bootloader.
BTW: The 1st thing of all things an Android user should do is to enable USB debugging on his phone: that makes it all easier.
Click to expand...
Click to collapse
, thank you, but, do you know if there is someone who could recover the files by paying him?
I really want those files
help38 said:
, thank you, but, do you know if there is someone who could recover the files by paying him?
I really want those files
Click to expand...
Click to collapse
Repair service?
jwoegerbauer said:
Repair service?
Click to expand...
Click to collapse
I don't think they could, but I will try, thanks.
jwoegerbauer said:
Repair service?
Click to expand...
Click to collapse
They told me that they can't...
Do you know any other place to recover my photos?
Thank you again.
At least is there a way to unbrick the phone?
Thanks.
Help please