Hi,
When I try to unbrick tablet (Dell Venue 7 3730 WIFI Only (t01c001)), fails with the error:
Code:
C:\Users\devillo\Desktop\ifwi>if C:\Windows\system32\cmd.exe == C:\Windows\system32\cmd.exe goto shellok
C:\Users\devillo\Desktop\ifwi>set PACKAGE_DIR=C:\Users\devillo\Desktop\ifwi\
C:\Users\devillo\Desktop\ifwi>set FWDNX=--fwdnx C:\Users\devillo\Desktop\ifwi\\dnx_fwr_firmware_P706T_NoModem.bin
C:\Users\devillo\Desktop\ifwi>set FWIMAGE=--fwimage C:\Users\devillo\Desktop\ifwi\\ifwi_firmware_P706T_NoModem-F9.70.bin
C:\Users\devillo\Desktop\ifwi>set OSDNX=--osdnx C:\Users\devillo\Desktop\ifwi\\dnx_pos.bin
C:\Users\devillo\Desktop\ifwi>set OSIMAGE=--osimage C:\Users\devillo\Desktop\ifwi\\fastboot.pos.img.bin
C:\Users\devillo\Desktop\ifwi>rem "c:\xFSTK\xfstk-dldr-solo.exe" --fwdnx C:\Users\devillo\Desktop\ifwi\\dnx_fwr_firmware_P706T_NoModem.bin --fwimage C:\Users\devillo\Desktop\ifwi\\ifwi_firmware_P706T_NoModem-F9.70.bin --osdnx C:\Users\devillo\Desktop\ifwi\\dnx_pos.bin --osimage C:\Users\devillo\Desktop\ifwi\\fastboot.pos.img.bin --gpflags 0x80000345 --verbose
C:\Users\devillo\Desktop\ifwi>"c:\xFSTK\xfstk-dldr-solo.exe" --fwdnx C:\Users\devillo\Desktop\ifwi\\dnx_fwr_firmware_P706T_NoModem.bin --fwimage C:\Users\devillo\Desktop\ifwi\\ifwi_firmware_P706T_NoModem-F9.70.bin --osdnx C:\Users\devillo\Desktop\ifwi\\dnx_pos.bin --osimage C:\Users\devillo\Desktop\ifwi\\fastboot.pos.img.bin --gpflags 0x80000007 --verbose
XFSTK Downloader Solo 1.4.3
Copyright (c) 2013 Intel Corporation
Build date and time: Sep 26 2013 15:15:57
Intel SoC Device Detection Failed: Attempt #0
.Intel SoC Device Detection Found
Parsing Commandline....
Registering Status Callback....
.Initiating Download Process....
..XFSTK-LOG--USBSN:--virtual bool CloverviewPlusDownloader::SetDevice(IGenericDevice*)
XFSTK-LOG--USBSN:--virtual bool CloverviewPlusDownloader::UpdateTarget()
XFSTK-LOG--USBSN:--FWDnxPath -- C:\Users\devillo\Desktop\ifwi\\dnx_fwr_firmware_P706T_NoModem.bin
XFSTK-LOG--USBSN:--FWImagePath -- C:\Users\devillo\Desktop\ifwi\\ifwi_firmware_P706T_NoModem-F9.70.bin
XFSTK-LOG--USBSN:--SoftfusesPath -- BLANK.bin
XFSTK-LOG--USBSN:--OSDnxPath -- C:\Users\devillo\Desktop\ifwi\\dnx_pos.bin
XFSTK-LOG--USBSN:--OSImagePath -- C:\Users\devillo\Desktop\ifwi\\fastboot.pos.img.bin
XFSTK-LOG--USBSN:--MiscDnxPath --
XFSTK-LOG--USBSN:--Gpflags -- 80000007
XFSTK-LOG--USBSN:--DebugLevel -- ffffffff
XFSTK-LOG--USBSN:--UsbDelay ms -- 0
XFSTK-LOG--USBSN:--TransferType -- USB
XFSTK-LOG--USBSN:--WipeIFWI -- False
XFSTK-LOG--USBSN:--Idrq -- False
XFSTK-LOG--USBSN:--Verbose -- True
XFSTK-LOG--USBSN:--void CloverviewPlusDownloader::Init()
XFSTK-LOG--USBSN:--Open
XFSTK-LOG--USBSN:--void CloverviewPlusUtils::SetUsbsn(char*)
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--USB Device found - USBSN: D62ADAB1EFCD3855 Address:1
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--void CloverviewPlusDownloader::do_update(CloverviewPlusOptions*)
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Start
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Sending DnER...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe DnER
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe 0
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Write --->DnER
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Windriver Error: 0x20000015, Timeout expired
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--LogError
XFSTK-STATUS--USBSN:D62ADAB1EFCD3855--Error Code: 1 - Connection error
XFSTK-STATUS--USBSN:D62ADAB1EFCD3855--Failed to start Dldr state machine, aborting ...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--void CloverviewPlusDownloader::do_abort()
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Abort
XFSTK-STATUS--USBSN:D62ADAB1EFCD3855--FAIL
XFSTK-STATUS--USBSN:D62ADAB1EFCD3855--Errors encounter during download. Aborting...
XFSTK-STATUS--Reconnecting to device - Attempt #1
XFSTK-STATUS--Reconnecting to device - Attempt #2
XFSTK-STATUS--Reconnecting to device - Attempt #3
XFSTK-STATUS--Reconnecting to device - Attempt #4
XFSTK-STATUS--Reconnecting to device - Attempt #5
XFSTK-STATUS--Reconnecting to device - Attempt #6
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--virtual bool CloverviewPlusDownloader::UpdateTarget()
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--FWDnxPath -- C:\Users\devillo\Desktop\ifwi\\dnx_fwr_firmware_P706T_NoModem.bin
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--FWImagePath -- C:\Users\devillo\Desktop\ifwi\\ifwi_firmware_P706T_NoModem-F9.70.bin
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--SoftfusesPath -- BLANK.bin
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--OSDnxPath -- C:\Users\devillo\Desktop\ifwi\\dnx_pos.bin
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--OSImagePath -- C:\Users\devillo\Desktop\ifwi\\fastboot.pos.img.bin
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--MiscDnxPath --
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Gpflags -- 80000007
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--DebugLevel -- ffffffff
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--UsbDelay ms -- 0
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--TransferType -- USB
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WipeIFWI -- False
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Idrq -- False
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Verbose -- True
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--void CloverviewPlusDownloader::Init()
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Open
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--void CloverviewPlusUtils::SetUsbsn(char*)
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--USB Device found - USBSN: D62ADAB1EFCD3855 Address:1
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--void CloverviewPlusDownloader::do_update(CloverviewPlusOptions*)
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Start
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Sending DnER...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe DnER
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe 0
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Write --->DnER
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetOpCode
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--ReadInAck
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetAck
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetAck - DFRM(0x4)
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--FW: Handle virgin part DnX ...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetOpCode
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Changing to DLDR_STATE_FW_NORMAL ...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--InitNoSize
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--CheckFile
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--CheckFile
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--C:\Users\devillo\Desktop\ifwi\\dnx_fwr_firmware_P706T_NoModem.bin size:99296 bytes
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--C:\Users\devillo\Desktop\ifwi\\dnx_fwr_firmware_P706T_NoModem.bin size:99296 bytes
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--InitFwImage
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--C:\Users\devillo\Desktop\ifwi\\ifwi_firmware_P706T_NoModem-F9.70.bin size:2031600 bytes
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--allocating buffers for FW images...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--C:\Users\devillo\Desktop\ifwi\\ifwi_firmware_P706T_NoModem-F9.70.bin size:2031600 bytes
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--allocating buffers for primary/secondary security FW images...
23294768742236108
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--loading buffers for FW images...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--loading buffers for primary/secondary security FW images...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--loading buffers for FUPH...
XFSTK-STATUS--USBSN:D62ADAB1EFCD3855--FW download is in progress ...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--StartFw
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--CLVP Total number of calculated steps : 28.000000
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--sending 6 DWORDS of DnxFW size and checksum...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe ŕ
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe 0
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Write --->ŕ
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--End of StHandleFwNormal
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetOpCode
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--ReadInAck
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetAck
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetAck - DXBL(0x4)
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--FW: Sending DnX ...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--FwDXBL
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Sending FW Dnx data...7044b0
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe __BINARY__
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe 0
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Write --->__BINARY__
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--LogProgress
XFSTK-PROGRESS--USBSN:D62ADAB1EFCD3855--3
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetOpCode
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--ReadInAck
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetAck
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetAck - RUPHS(0x8)
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--FW: Sending FW Update Profile Hdr Size...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe $
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe 0
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Write --->$
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--LogProgress
XFSTK-PROGRESS--USBSN:D62ADAB1EFCD3855--7
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetOpCode
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--ReadInAck
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetAck
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetAck - RUPH(0x4)
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--FW: Sending FW Update Profile Hdr...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe __BINARY__
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe 0
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Write --->__BINARY__
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--LogProgress
XFSTK-PROGRESS--USBSN:D62ADAB1EFCD3855--10
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetOpCode
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--ReadInAck
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetAck
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetAck - DMIP(0x4)
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--FW: Sending MIP...
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe __BINARY__
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--WriteOutPipe 0
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Write --->__BINARY__
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--LogProgress
XFSTK-PROGRESS--USBSN:D62ADAB1EFCD3855--14
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetOpCode
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--ReadInAck
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetAck
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--usb_bulk_read() fails
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Windriver Error: 0x20000015, Timeout expired
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--usb_bulk_read() fails
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Windriver Error: 0x20000015, Timeout expired
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--GetAck - ER25(0x4)
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--LogError
XFSTK-STATUS--USBSN:D62ADAB1EFCD3855--Error Code: 34 - ER25 - Storage Programming Error
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--void CloverviewPlusDownloader::do_abort()
XFSTK-LOG--USBSN:D62ADAB1EFCD3855--Abort
XFSTK-STATUS--USBSN:D62ADAB1EFCD3855--FAIL
XFSTK-STATUS--USBSN:D62ADAB1EFCD3855--Errors encounter during FW download. Aborting ...
Fastboot not work.
Logo Dell and USB not display.
Is it possible to repair tablet?
Related
Help Please. 7012 stuck in fastboot. Was only able to flash CWMR 2.5.1.3, (don't ask how), and I cannot flash any other rom, zip file, update.zip, or any .img files that'll actually stick. I've used both the install from sdcard option in CWMR, and the fastboot commands. Maybe I screwed up my partitions, I have no idea. I've sucessfully rooted devices before, but the limited supportt is kicking my ass. I'd appreciate any and all help. Thnk u for reading
Ok update I was able to use adb shell on cwmr and this is the dmesg.PLEASE can anyone help me with this?
<5>Linux version 2.6.29 ([email protected]) (gcc version 4.3.1 (GCC) ) #116 Sat Nov 6 05:46:45 CST 2010
<4>CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
<4>CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>Machine: Telechips TCC89/91/92XX Demo Board
<4>kernel start display option [resolution : 29][output : 191]
<4>Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 40960
<7>free_area_init_node: node 0, pgdat c03f45ec, node_mem_map c0490000
<7> Normal zone: 320 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 40640 pages, LIFO batch:7
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 40640
<5>Kernel command line: console=ttySAC0 androidboot.hardware=tcc92xx
<3>Unknown boot option `androidboot.hardware=tcc92xx': ignoring
<4>tcc9200_irq_init
<4>PID hash table entries: 1024 (order: 10, 4096 bytes)
<4> ### CORE CLOCK (500000000 Hz), BUS CLOCK (166000000 Hz) ###
<4>Console: colour dummy device 80x30
<4>tcc_console_init
<4>tcc_serial_console_setup: co=c03e171c (0), <NULL>
<4>tcc_serial_get_options
<4>tcc_serial_console_setup: port=c03e1768 (0)
<4>tcc_serial_set_termios port[0]
<4>config: 8bits/char
<4>setting ulcon to uclk[480000] 00000003, brddiv to 26 [115200]
<6>console [ttySAC0] enabled
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>_etext:0xc03c7000, _text:0xc0029000, _end:0xc048de1a, __init_end:0xc0029000, __init_begin:0xc0008000
<6>Memory: 160MB = 160MB total
<5>Memory: 156300KB available (3704K code, 791K data, 132K init)
<6>Calibrating delay loop... 499.71 BogoMIPS (lpj=2498560)
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>net_namespace: 932 bytes
<6>NET: Registered protocol family 16
<6>TCC8900 GPIO initialized
<4>i2c_register_driver: new style driver
<6>TCC clock driver initialized
<4>clock: xin: unimplemented function 'clk_enable' called
<4>attached TCC adc driver
<4>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>cfg80211: Using static regulatory domain info
<6>cfg80211: Regulatory domain: US
<6> (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6> (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
<6> (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
<6>cfg80211: Calling CRDA for country: US
<6>Switched to NOHz mode on CPU #0
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>initrd_start:0xc1000000, initrd_end:0xc1136af5
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 1240K
<4>---> 80eec0f8b92fc0 <---
<4> read_id crc error
<4>NetWinder Floating Point Emulator V0.97 (double precision)
<6>ashmem: initialized
<4>yaffs Nov 6 2010 04:01:36 Installing.
<6>msgmni has been set to 307
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered (default)
<6>i2c /dev entries driver
<4>i2c0 SCK(100) <-- input clk(40000Khz), prescale(7)
<4>i2c1 SCK(100) <-- input clk(40000Khz), prescale(7)
<6>tcc-i2c tcc-i2c: i2c-0: I2C adapter
<6> tccfb_init (built Nov 6 2010 04:01:52)
<4>clock: pll2: unimplemented function 'clk_enable' called
<4> tccfb_init LCDC:1
<4>tcc92xxx fb +probe
<4>tccfb_map_video_memory--->lk_map_cpu=0xcac00000
<6>fb0: tccfb frame buffer device
<6>TCC Overlay driver initializing
<6>HDMI Audio Driver ver. 1.1 (built Nov 6 2010 04:01:12)
<6>HDMI Driver ver. 1.2.1 (built Nov 6 2010 04:01:40)
<6>CEC Driver ver. 1.0 (built Nov 6 2010 04:01:12)
<6>hpd_init
<6>HPD Driver ver. 1.2 (built Nov 6 2010 04:01:40)
<6>3 hpd_init
<4>tcc_intr: init (ver 2.0)
<4>tcc_intr: init (ver 2.0)
<6>TCC rotation driver initializing
<6>TCC scaler driver initializing
<6>TCC scaler1 driver initializing
<6>TCCXX JPEG Encoder driver initializing
<6>TCCXX JPEG driver initializing
<6>TCC T-DMB tuner driver initializing
<6>tcc_clockctrl_init
<4>tcc_serial_init(c03e16c0,c03e1710)
<4>tcc_uart_probe
<4>tcc_serial_init_ports: initialising ports...
<6>tcc9200-uart.0: tcc-uart0 at MMIO 0xf0532000 (irq = 64) is a uart0
<4>tcc_serial_set_mctrl
<6>brd: module loaded
<6>loop: module loaded
<6>pmem: 1 init
<6>pmem_adsp: 0 init
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>Linux video capture interface: v2.00
<4>Driver 'sd' needs updating - please use bus_type methods
<4>tcc-mmc0: init.
<4>tcc-mmc1: init.
<4>[MTD TCC] [PORT CONFIG - CS[0, 1] [NAND Data Port: GPIO_B Hw4 ~ Hw11]
<4>[MTD TCC] DMA Alloc Addr:0x49897000, Size:1024
<4>[MTD TCC] [BClk 192MHZ][1Tick 53][RE-S:0,P:6,H:2][WR-S:0,P:3,H:2][COM-S:2,P:15,H:15]
<4>[Golden Info] [TCC_MTD] BadBlk:1028 [SERIAL]
<4>[Golden Info] [TCC_MTD] BadBlk:1032 [SERIAL]
<4>[Golden Info] [TCC_MTD] BadBlk:1036 [SERIAL]
<4>[Golden Info] [TCC_MTD] BadBlk:1037 [SERIAL]
<4>[Golden Info] [TCC_MTD] BadBlk:1048 [SERIAL]
<4>[Golden Info] [Nand Total Bad Block: 5]
<4>[MTD TCC] [PartName: boot] [StBlk : 28]
<4>[MTD TCC] [PartName: boot] [EndBlk: 47]
<4>[MTD TCC] [PartName: kpanic] [StBlk : 48]
<4>[MTD TCC] [PartName: kpanic] [EndBlk: 57]
<4>[MTD TCC] [PartName: system] [StBlk : 58]
<4>[MTD TCC] [PartName: system] [EndBlk: 417]
<4>[MTD TCC] [PartName: splash] [StBlk : 418]
<4>[MTD TCC] [PartName: splash] [EndBlk: 425]
<4>[MTD TCC] [PartName: cache] [StBlk : 426]
<4>[MTD TCC] [PartName: cache] [EndBlk: 505]
<4>[MTD TCC] [PartName: userdata] [StBlk : 506]
<4>[MTD TCC] [PartName: userdata] [EndBlk:1027]
<4>[MTD TCC] [PartName: recovery] [StBlk :1028]
<4>[MTD TCC] [PartName: recovery] [BadBlk:1028]
<4>[MTD TCC] [PartName: recovery] [BadBlk:1032]
<4>[MTD TCC] [PartName: recovery] [BadBlk:1036]
<4>[MTD TCC] [PartName: recovery] [BadBlk:1037]
<4>[MTD TCC] [PartName: recovery] [BadBlk:1048]
<4>[MTD TCC] [PartName: recovery] [EndBlk:1052]
<4>[MTD TCC] [PartName: misc] [StBlk :1053]
<4>[MTD TCC] [PartName: misc] [EndBlk:1054]
<4>[MTD TCC] [PartName: tcc] [StBlk :1055]
<4>[MTD TCC] [PartName: tcc] [EndBlk:1056]
<4>[MTD TCC] [MTDTotalBlk:1024] [MTDRervBlk:29] [MTDStBlk: 28] [MTDEdBlk:1081]
<4>[MTD TCC] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x68
<6>[MTD BASE]Bus Width: 8 bit, PageSize: 4096
<6>Scanning device for bad blocks
<5>Creating 9 MTD partitions on NAND Flash:
<5>0x000000000000-0x000000a00000 : "boot"
<5>ftl_cs: FTL header not found.
<5>0x000000a00000-0x000000f00000 : "kpanic"
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[MTD-ReadPage-Fail] [BlkNum:48] [Error:0x0c100002]
<5>ftl_cs: FTL header not found.
<5>0x000000f00000-0x00000c300000 : "system"
<5>ftl_cs: FTL header not found.
<5>0x00000c300000-0x00000c700000 : "splash"
<5>ftl_cs: FTL header not found.
<5>0x00000c700000-0x00000ef00000 : "cache"
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[MTD-ReadPage-Fail] [BlkNum:427] [Error:0x0c100002]
<5>ftl_cs: FTL header not found.
<5>0x00000ef00000-0x00001f400000 : "userdata"
<5>ftl_cs: FTL header not found.
<7>mmc1: queuing CIS tuple 0x01 length 3
<5>0x00001f400000-0x00001fe00000 : "recovery"
<5>ftl_cs: FTL header not found.
<5>0x00001fe00000-0x00001ff00000 : "misc"
<5>ftl_cs: FTL header not found.
<5>0x00001ff00000-0x000020000000 : "tcc"
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[MTD-ReadPage-Fail] [BlkNum:1055] [Error:0x0c100002]
<5>ftl_cs: FTL header not found.
<4>tcc_tsif: spi1 init (Nov 6 2010 04:01:48)
<4>tcc-tsif1: init
<4>tcc_tsif: alloc DMA buffer @0xFF8F0000(Phy=0x49000000), size:2097152
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>tcc-ohci tcc-ohci: TCC OHCI
<6>tcc-ohci tcc-ohci: new USB bus registered, assigned bus number 1
<6>tcc-ohci tcc-ohci: irq 49, io mem 0xf0500000
<7>mmc1: queuing CIS tuple 0x1a length 5
<7>mmc1: queuing CIS tuple 0x1b length 8
<7>mmc1: queuing CIS tuple 0x14 length 0
<7>mmc1: queuing CIS tuple 0x80 length 1
<7>mmc1: queuing CIS tuple 0x81 length 1
<7>mmc1: queuing CIS tuple 0x82 length 1
<6>mmc1: new SDIO card at address 0001
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>usbcore: registered new interface driver cdc_acm
<6>cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>usbserial: USB Serial Driver core
<6>USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver option
<6>option: v0.7.2:USB Driver for GSM modems
<6>dwc_otg: version 2.60a 22-NOV-2006
<7>dwc_otg_driver_probe(c03cd028)
<7>base=0xf0550000
<7>dwc_otg_device=0xc9ef9aa0
<6>dwc_otg dwc_otg.0: DWC OTG Controller
<6>dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 2
<6>dwc_otg dwc_otg.0: irq 48, io mem 0x00000000
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<6>android init
<6>android_probe pdata: c03cdad8
<6>gadget: Android Eclair
<6>gadget: COBY
<6>android_bind
<4>android_bind_config,0, 2
<6>android_usb gadget: android_usb ready
<6>f_adb init
<6>android_register_function adb
<6>f_mass_storage init
<6>android_register_function usb_mass_storage
<6>mass_storage_bind_config
<6>fsg_probe pdata: c03cdac8
<6>android_usb gadget: Number of LUNs=2
<6>adb_bind_config
<6>mice: PS/2 mouse device common for all mice
<6>Telechips Keypad Driver
<6>input: telechips keypad as /devices/virtual/input/input0
<6>Telechips Touchscreen driver, (c) 2009 Telechips
<6>tcc-ts got loaded successfully.
<6>input: tcc-ts as /devices/platform/tcc-ts/input/input1
<4>TCC RTC, (c) 2009, Telechips
<4>tcc_rtc: alarm irq 43
<6>tcc-rtc tcc-rtc: rtc core: registered tcc-rtc as rtc0
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>Advanced Linux Sound Architecture Driver Version 1.0.18a.
<4>No device for DAI alc5621
<4>No device for DAI IEC958
<4>No device for DAI tcc-i2s
<4>No device for DAI tcc-spdif
<4>TCC Board probe [tcc_board_probe]
<4>== alsa-debug == [tea_spdif_setclock], clock_rate[44100]
<6>alc5621: ALC5621 Audio Codec 1.00
<4>i2c_register_driver: new style driver
<4>__attach_adapter: [Failure] id[0x0]class[0x0] id_table[alc5621]
<4>__attach_adapter: [Failure] id[0x0]class[0x0] id_table[alc5621]
<4>__attach_adapter: [Failure] id[0x0]class[0x0] id_table[alc5621]
<4>__attach_adapter: [Failure] id[0x0]class[0x0] id_table[alc5621]
<4>Set ID to device mode
<4>alc5621_init
<4>== alsa-debug == tcc_pcm_preallocate_dma_buffer size [65536]
<4>== alsa-debug == tcc_pcm_preallocate_dma_buffer size [65536]
<4>ID change ISR : Device
<6>asoc: alc5621 <-> tcc-i2s mapping ok
<4>== alsa-debug == tcc_pcm_preallocate_dma_buffer size [65536]
<6>asoc: IEC958 <-> tcc-spdif mapping ok
<3>dapm: alc5621: configuring unknown pin MICIN
<3>Failed to add route LHPOUT->Headset Jack
<6>ALSA device list:
<6> #0: tccx_board (alc5621)
<6>TCP cubic registered
<6>NET: Registered protocol family 10
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>TCC cpufreq driver initialized
<6>VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<4>read time 2010/10/14 18:00:37
<6>tcc-rtc tcc-rtc: setting system clock to 2010-10-14 18:00:37 UTC (1287079237)
<6>Freeing init memory: 132K
<4>[#### BT ####] tcc_serial_startup port[0]
<4>request serial irq:64,retval:0
<4>tcc_serial_set_termios port[0]
<4>config: 8bits/char
<4>setting ulcon to uclk[480000] 00000003, brddiv to 26 [115200]
<4>tcc_serial_set_mctrl
<4>
<4>usb cable connected.
<4>tcc_serial_stop_rx
<4>[#### BT ####] tcc_serial_stop_rx port[0]
<4>[#### BT ####] tcc_serial_shutdown port[0]
<6>android_usb gadget: high speed config #1: android
<6>mmc0: new SDHC card at address b368
<6>mmcblk0: mmc0:b368 SDC 3.84 GiB
<6> mmcblk0: p1 p2 p3
<4>[#### BT ####] tcc_serial_startup port[0]
<4>request serial irq:64,retval:0
<4>tcc_serial_set_termios port[0]
<4>config: 8bits/char
<4>setting ulcon to uclk[480000] 00000003, brddiv to 26 [115200]
<4>tcc_serial_stop_rx
<4>[#### BT ####] tcc_serial_stop_rx port[0]
<4>[#### BT ####] tcc_serial_shutdown port[0]
<3>init: cannot open '/initlogo.rle'
<3>init: Unable to open persistent property directory /data/property errno: 2
<6>enabling adb
<6>adb_open
<6>yaffs: dev is 32505860 name is "mtdblock4"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.4, "mtdblock4"
<4>yaffs: auto selecting yaffs2
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[DoubleBuf] [EccType:16] [res:c100002]
<4>[MTD-ReadPage-Fail] [BlkNum:427] [Error:0x0c100002]
<4>yaffs: restored from checkpoint
<4>yaffs_read_super: isCheckpointed 1
<6>android_usb gadget: high speed config #1: android
<4>adb_function_set_alt intf: 1 alt: 0
<6>adb_release
<6>adb_open
<4>save exit: isCheckpointed 1
<4>usb usb1: root hub lost power or was reset
<6>yaffs: dev is 32505861 name is "mtdblock5"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.5, "mtdblock5"
<4>yaffs: auto selecting yaffs2
<4>yaffs_read_super: isCheckpointed 0
<6>yaffs: dev is 32505858 name is "mtdblock2"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.2, "mtdblock2"
<4>yaffs: auto selecting yaffs2
<6>yaffs: dev is 32505858 name is "mtdblock2"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.2, "mtdblock2"
Code:
D/NetdConnector( 421): SND -> {22 softap fwreload wlan0 STA}
D/WifiCommon( 99): wifi_change_fw_path [STA]
D/WifiCommon( 99): Hal cmd: "hal load p2p"
D/Hald ( 104): ======Receive cmd======
D/Hald ( 104): cmd <load p2p>
D/Hald ( 104): Check NvRAM status.
D/Hald ( 104): NvRAM is READY!
D/Hald ( 104): Start load P2P driver.
D/vold ( 421): size2:0
E/Hald ( 104): SET_P2P_MODE enable[1], mode[0] Failed
E/Hald ( 104): No such device
D/WifiCommon( 99): Hal cmd response code: "200"
D/NetdConnector( 421): RCV <- {200 22 Softap operation succeeded}
D/NetdConnector( 421): RMV <- {200 22 Softap operation succeeded}
D/NetdConnector( 421): SND -> {23 interface getcfg wlan0}
D/vold ( 421): size2:0
W/CommandListener( 99): Failed to retrieve HW addr for wlan0 (No such device)
D/NetdConnector( 421): RCV <- {213 23 00:00:00:00:00:00 0.0.0.0 0 down}
D/NetdConnector( 421): RMV <- {213 23 00:00:00:00:00:00 0.0.0.0 0 down}
D/NetdConnector( 421): SND -> {24 interface setcfg wlan0 0.0.0.0 0 down}
D/CommandListener( 99): Setting iface cfg
D/vold ( 421): size2:0
D/NetdConnector( 421): RCV <- {400 24 Failed to set address (No such device)}
D/NetdConnector( 421): RMV <- {400 24 Failed to set address (No such device)}
E/WifiStateMachine( 421): Unable to change interface settings: java.lang.IllegalStateException: command '24 interface setcfg wlan0 0.0.0.0 0 down' failed with '400 24 Failed to set address (No such device)'
D/WifiCommon( 421): Stop "p2p_supplicant"
D/WifiCommon( 421): [wlan0]wifi_close_supplicant_connection
D/WifiCommon( 421): wifi_start_supplicant [1]
D/WifiCommon( 421): Start "p2p_supplicant"
D/WifiStateMachine( 421): Supplicant start successful
D/dalvikvm( 421): create interp thread : stack size=32KB
D/dalvikvm( 421): create new thread
D/dalvikvm( 421): update thread list
D/dalvikvm( 421): threadid=79: interp stack at 0x52ffb000
D/dalvikvm( 421): threadid=79: created from interp
D/dalvikvm( 421): start new thread
D/StateMachine( 421): transitionTo: destState=SupplicantStartingState
D/StateMachine( 421): handleMessage: new destination call exit
D/StateMachine( 421): setupTempStateStackWithStatesToEnter: X mTempStateStackCount=1,curStateInfo: state=DefaultState,active=true,parent=null
D/StateMachine( 421): invokeExitMethods: DriverLoadedState
D/StateMachine( 421): moveTempStackToStateStack: i=0,j=1
D/StateMachine( 421): moveTempStackToStateStack: X mStateStackTop=1,startingIndex=1,Top=SupplicantStartingState
D/StateMachine( 421): invokeEnterMethods: SupplicantStartingState
D/WifiStateMachine( 421): SupplicantStartingState
D/StateMachine( 421): handleMessage: X
D/dalvikvm( 421): threadid=79: notify debugger
D/dalvikvm( 421): threadid=79 (WifiMonitor): calling run()
D/WifiCommon( 421): [wlan0]wifi_connect_to_supplicant
D/wpa_supplicant( 2329): wpa_supplicant v2.0-devel-4.1.1
D/wpa_supplicant( 2329): random: Added entropy from /data/misc/wifi/entropy.bin (own_pool_ready=2)
D/wpa_supplicant( 2329): random: Trying to read entropy from /dev/random
D/wpa_supplicant( 2329): random: Updated entropy file /data/misc/wifi/entropy.bin (own_pool_ready=2)
D/wpa_supplicant( 2329): Initializing interface 'wlan0' conf '/data/misc/wifi/wpa_supplicant.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
D/wpa_supplicant( 2329): Configuration file '/data/misc/wifi/wpa_supplicant.conf' -> '/data/misc/wifi/wpa_supplicant.conf'
D/wpa_supplicant( 2329): Reading configuration file '/data/misc/wifi/wpa_supplicant.conf'
D/wpa_supplicant( 2329): ctrl_interface='/data/misc/wpa_supplicant'
D/wpa_supplicant( 2329): update_config=1
D/wpa_supplicant( 2329): manufacturer='MediaTek Inc.'
D/wpa_supplicant( 2329): device_name='Wireless Client'
D/wpa_supplicant( 2329): model_name='MTK Wireless Model'
D/wpa_supplicant( 2329): model_number='1.0'
D/wpa_supplicant( 2329): serial_number='2.0'
D/wpa_supplicant( 2329): os_version=01020300
D/wpa_supplicant( 2329): config_methods='display push_button keypad'
D/wpa_supplicant( 2329): Could not open file /sys/class/net/wlan0/phy80211/name: No such file or directory
I/wpa_supplicant( 2329): rfkill: Cannot open RFKILL control device
D/wpa_supplicant( 2329): nl80211: RFKILL status not available
D/wpa_supplicant( 2329): nl80211: Set mode ifindex 0 iftype 2 (STATION)
D/wpa_supplicant( 2329): nl80211: Failed to set interface 0 to mode 2: -19 (No such device)
E/wpa_supplicant( 2329): nl80211: Could not configure driver to use managed mode
D/wpa_supplicant( 2329): netlink: Operstate: linkmode=0, operstate=6
E/wpa_supplicant( 2329): Could not read interface wlan0 flags: No such device
D/wpa_supplicant( 2329): nl80211: Set mode ifindex 0 iftype 2 (STATION)
D/wpa_supplicant( 2329): nl80211: Failed to set interface 0 to mode 2: -19 (No such device)
E/wpa_supplicant( 2329): wlan0: Failed to initialize driver interface
D/wpa_supplicant( 2329): Failed to add interface wlan0
D/wpa_supplicant( 2329): [WAPI] wpa_supplicant_deinit_wapi <===
D/wpa_supplicant( 2329): wlan0: Cancelling scan request
D/wpa_supplicant( 2329): wlan0: Cancelling authentication timeout
D/wpa_supplicant( 2329): random: Updated entropy file /data/misc/wifi/entropy.bin (own_pool_ready=2)
I/logwrapper( 2327): /system/bin/wpa_supplicant terminated by exit(255)
I hav successfully ported a rom but a problem is here i am a noob and now my wifi isnt working . i hav uploaded logcat log. Any help.???
Somehow last night my phone (Galaxy S4 running AOSP 4.4.2) crashed and now it wont reboot. It just sticks on the screen with the four colours animation for ever. I tried deleting the Cache, and Davilik Cache but it has not fixed the problem .. after this is went through the Upgrading Android process for all the apps but then stuck on "Starting Apps" .. so pretty clearly some application is starting and has a problem and so my phone wont boot .. but is there anyway of finding out which application it is?? Im aware I can wipe data and start again but would like to solve the problem without this if its possible. I also tried re-flashing my ROM but it didnt help.
Thanks for any help in advance.
If it helps anybody help me, I plugged my phone into usb while it is stuck in the bootloop and ran
adb logcat *:E .. here is the result
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
E/DataRouter( 198): USB Interface is open with 0x9
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 1 of 10
E/macloader( 210): CID info file will be created!!!
E/wcnss_service( 221): CAL file not found
E/wcnss_service( 221): Failed to open wcnss device : No such file or directory
E/mm-camera( 211): qcamsvr_start: old_mode = 3f
E/INSTHK ( 249): Checked...
E/PPDaemon( 217): Failed to open the config file!
E/PPDaemon( 217): Panel type: 8
E/rmt_storage( 223): Remote storage service is not supported on mdm target
E/AT_Distributor( 212): Failed to init ATD
E/mm-camera( 211): qcamsvr_load_gesture_lib Error opening gesture library
E/mm-camera( 211): Cannot init Gesture library
E/mm-camera( 211): camera_plugin_create_func: handle = 0xb6c10008, client_open_fn = 0xb6c0d565, destroy_fn = 0xb6c0db99
E/QC-time-services( 220): Daemon:genoff_boot_tod_init: Unable to set TOD at boot up
E/QC-time-services( 220): Daemon: Unable to set TOD at boot up
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/Diag_Lib( 195): Diag_LSM_Init: Failed to open handle to diag driver, error = 13
E/QCNEA ( 214): CnE Standard Version 4.01
E/QCNEA ( 214): CnE Pro Version 1.01
E/QCNEA ( 214): Cne WQE Version 0.1
E/QCNEA ( 214): Cne NSRM Version 1.01
E/Sensorhubs( 207): couldn't find 'ssp_context' input device
E/Sensorhubs( 207): SSPContext: open sensorhub device failed(-1)
E/PRDrmPlugIn( 202): PRDrmPlugin:RDrmPlugin
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::create
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::SetEventHandler
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 2 of 10
E/PRDrmPlugIn( 202): PRDrmPlugin:nGetSupportInfo, uniqueId = 0
E/Sensorhubs( 207): couldn't find 'gesture_sensor' input device
E/MediaPlayerFactory( 203): calling dlopen on FACTORY_LIB
E/MediaPlayerFactory( 203): calling dlsym on pFactoryLib for FACTORY_CREATE_FN
E/MediaPlayerFactory( 203): registering DASH Player factory...
E/QualcommCamera( 203): Qint android::get_number_of_cameras(): E
E/alsa_mixer( 203): Control open failed
E/ ( 203): [ACDB RTC]->rtc init done!->result [0]
E/Diag_Lib( 203): actp_diag_init: call diag init function with B50181DD
E/ ( 203): [ACDB ACPH]->actp diag init done!
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/AndroidRuntime( 201): cannot open customer xml file
E/AndroidRuntime( 201): /system/csc/customer.xml can't open file
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 3 of 10
E/ICD ( 194): There is no file or permission.
E/BootAnimation( 613): Could not open '/sys/devices/w1_bus_master1/w1_master_check_id'
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 4 of 10
E/EmojiFactory_jni( 201): Failed to load libemoji.so: dlopen failed: library "libemoji.so" not found
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 5 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 6 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 7 of 10
E/Sensors ( 768): getName gyro_sensor name file open error.
E/GyroSensor( 768): GyroSensor : getName of gyro_sensor failed.
E/TemperatureHumiditySensor( 768): Failed to open send_accuracy sysfs
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/MagneticSensor( 768): enable, 122, data_fd = -1
E/GyroSensor( 768): enable, 148, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 8 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 9 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 10 of 10
E/kickstart-qcks( 226): '/dev/mdm' was not found
E/kickstart-qcks( 226): ERROR: Can't bring MDM9K out of reset
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_mixer( 203): Control open failed
E/ ( 203): csd_client_service_init: Invalid rx device 0, setting to handset
E/ ( 203): csd_client_service_init: Invalid tx device 0, setting to handset
E/alsa_ucm( 203): Invalid current verb value: Inactive - -1
E/alsa_ucm( 203): No valid device Speaker found
E/alsa_ucm( 203): Control device not initialized
E/alsa_ucm( 203): Control device not initialized
E/alsa_pcm( 203): cannot open device '/dev/snd/pcmC0D0p', errno 2
E/ALSADevice( 203): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA( 203): Device open failed
E/QMI_FW ( 203): xport_open: socket creation failed - 1
E/AudioPolicyManagerBase( 203): Not output found for attached devices 00000003
E/AudioPolicyManagerBase( 203): Failed to open primary output
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/Audio_Control_CSC( 203): /system/csc/sales_code.dat ==> cannot open file
E/AudioPolicyService( 203): couldn't init_check the audio policy (No such device)
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init:retry count exceeds limitQMI init failed continuing withoutserver
E/QC-time-services( 220): Daemon: QMI init failed, QMI calls inactive
E/QC-time-services( 220): Daemon: Time-services: Waiting to acceptconnection
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/QMI_FW ( 203): open_lookup_sock_fd: Lookup sock fd creation failed
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_enabledisable: delay= 0
E/EventHub( 768): could not get driver version for /dev/input/mice, Not a typewriter
E/ConnectivityService( 768): Error in networkAttributes - ignoring attempt to define type 17
E/ConnectivityService( 768): Ignoring protectedNetwork 14
E/MobileDataStateTracker( 768): default: Ignoring feature request because could not acquire PhoneService
E/MobileDataStateTracker( 768): default: Could not enable APN type "default"
F/SystemServer( 768): BOOT FAILURE Creating Connectivity Engine Service
F/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
F/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
F/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
F/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
F/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
F/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
F/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/SystemServer( 768): Failed to load CNE class
E/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
E/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
E/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
E/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
E/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
E/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
E/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/WifiStateMachine( 768): Unexpected BatchedScanResults :null
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/ActivityManager( 768): Attempt to launch receivers of broadcast intent Intent { act=android.net.ConnectivityService.action.PKT_CNT_SAMPLE_INTERVAL_ELAPSED flg=0x4 (has extras) } before boot completion
HI,
I'm developing my first CM for the device I use. It's a phone sporting a Snapdragon 410 (msm8916)
I can get the phone to connect to the network. Here is a part of the radio log :
D/RILD ( 0): **RIL Daemon Started**
D/RILD ( 0): **RILd param count=1**
D/RILD ( 266): RIL_Init argc = 5 clientId = 0
E/RILQ ( 266): log to /data/misc/radio/ril_log for QCRIL logging is not enabled
E/RILQ ( 266): (0/266): RIL[0][rild] qmi_ril_peripheral_mng_init: Failed to register for modem
I/RILQ ( 266): (0/266):RIL[0][rild] qmi_ril_qmi_client_pre_initialization_acquire: entry
I/RILQ ( 266): (0/266):RIL[0][rild] qmi_ril_qmi_client_pre_initialization_acquire: exit
D/RILD ( 266): RIL_Init rilInit completed
E/RILC ( 266): RIL_register: RIL version 11
D/RILD ( 266): RIL_Init RIL_register completed
D/RILD ( 266): RIL_Init starting sleep loop
I/RILQ ( 266): (0/266):RIL[0][main] qmi_ril_qmi_client_pre_initialization_release: entry
I/RILQ ( 266): (0/266):RIL[0][main] qmi_ril_qmi_client_pre_initialization_release: exit
E/RILQ ( 266): (0/266): RIL[0][main] qcril_qmi_init_core_client_handles: qcril_qmi_presence_init returned failure(-3)
E/RILQ ( 266): (0/266): RIL[0][main] qcril_qmi_nas_init: QCRIL_OPERATOR_NAME is persist.env.spec, property_name is persist.env.spec. Failed to get operator name
E/RILQ ( 266): (0/266): RIL[0] qcril_qmi_pdc_get_selected_config_ind_hdlr: no selected config id
E/RILQ ( 266): (0/266): RIL[0] qcril_qmi_pdc_get_selected_config_ind_hdlr: unable to find reqlist by event QCRIL_EVT_HOOK_QUERY_MODEM_TEST_MODE
I/RILQ ( 266): (0/266):RIL[0][main] qcril_arb_set_dsd_sys_status: old_pref_data 0 - new_data_pref 0
I/RILQ ( 266): (0/266):RIL[0][main] qcril_arb_set_dsd_sys_status: preferred dsd_sys_status nw=0x0, rat_value=0x0, so_mask=0x0000000000000800
I/RILQ ( 266): (0/266):RIL[0][main] qcril_arb_set_dsd_sys_status: preferred 1 - dsd_sys_status nw=0x0, rat_value=0x0, so_mask=0x0000000000000800
I/RILQ ( 266): (0/266):RIL[0][main] qcril_arb_set_dsd_sys_status: is_wwan_available 0
E/RILQ ( 266): (0/266): RIL[0][event] get_ecc_property_name: ecc list name : ril.ecclist.
E/RILQ ( 266): (0/266): RIL[0][event] qcril_uim_process_status_change_ind: card status invalid for slot 0x0
E/RILQ ( 266): (0/266): RIL[0][main] qcril_sms_perform_transport_layer_info_initialization: error while retrieving transport layer reg info
E/RILQ ( 266): (0/266): RIL[0][event] get_ecc_property_name: ecc list name : ril.ecclist.
E/RILQ ( 266): (0/266): RIL[0][event] qcril_uim_update_pbm_card_event: PBM_HANDLE_CARD 397313 processing Failed!
E/RILQ ( 266): (0/266): RIL[0][event] qcril_qmi_nas_update_iccid: Error reading iccid for slot 0
E/RILQ ( 266): (0/266): RIL[0][event] get_ecc_property_name: ecc list name : ril.ecclist.
Click to expand...
Click to collapse
Here is the source :
Kernel : https://github.com/supercairos/android_kernel_doro_msm8916_2
Device : https://github.com/supercairos/android_device_doro_hero
Vendor : https://github.com/supercairos/android_vendor_doro_hero
I would be glad If you could help me
Any help :'(
Hello! I'm working on RIL porting too. I'm working on MSM8974AC. What is SELinux status on your Android? In my case I suppose rild does not start because of security
does anyone have a custom recovery?
How to root the doro liberto 825?
recovery
Supercairos said:
Any help :'(
Click to expand...
Click to collapse
can you put me the recovery file please
If anyone wants to follow along, you can read here: http://forum.xda-developers.com/showthread.php?t=3259281
Essentially I'm trying to compile CM 12.1 for the LG G Stylo and it works quite well. Video recording is the last thing not working and I'm just reaching out to see if anyone is familiar with what may be wrong. Here's the relevant lines of the adb logcat:
E/QCamera2HWI( 298): getParameters() mbLowluminanceCondition = 0, mbLowluminanceConditionForVideo = 0, mbBacklightCondition = 0
E/QCamera2HWI( 298): getParameters() Flash is not firing !!!
E/QCameraStateMachine( 298): stateMachine : m_state [2], evt [8]
E/QCameraStateMachine( 298): stateMachine : m_state [2], evt [13]
E/QCameraStateMachine( 298): stateMachine : m_state [2], evt [13]
I/ExtendedUtils( 298): Invalid HFR rate specified : 0
I/ExtendedUtils( 298): Invalid HSR rate specified : 0
W/ExtendedUtils( 298): Invalid HFR rate specified
D/MediaCodecSource( 298): bitrate:12000000, samplerate:0, channels:0
I/OMX-VENC( 298): Component_init : OMX.qcom.video.encoder.avc : return = 0x0
E/OMX-VENC( 298): set_parameter: metamode is valid for input port only
W/OMXNodeInstance( 298): [77:qcom.encoder.avc] component does not support metadata mode; using fallback
E/ACodec ( 298): [OMX.qcom.video.encoder.avc] storeMetaDataInBuffers (output) failed w/ err -1010
W/ACodec ( 298): do not know color format 0x7fa30c04 = 2141391876
W/ACodec ( 298): do not know color format 0x7f000789 = 2130708361
E/ACodec ( 298): [OMX.qcom.video.encoder.avc] does not support color format 39
E/ACodec ( 298): [OMX.qcom.video.encoder.avc] configureCodec returning error -2147483648
E/ACodec ( 298): [OMX.qcom.video.encoder.avc] configureCodec returning error -2147483648
E/ACodec ( 298): signalError(omxError 0x80001001, internalError -2147483648)
E/MediaCodec( 298): Codec reported err 0x80001001, actionCode 0, while in state 3
E/MediaCodec( 298): configure failed with err 0x80001001, resetting...
I/OMX-VENC( 298): Component Deinit
D/mm-camera( 305): cpp_module_handle_stream_crop_event:785 frame id 42 stream_crop.x=0, stream_crop.y=0, stream_crop.dx=1280, stream_crop.dy=720, width 0 height 0 identity=0x20002
I/OMX-VENC( 298): Component_init : OMX.qcom.video.encoder.avc : return = 0x0
I/OMX-VENC( 298): Component Deinit
E/StagefrightRecorder( 298): Failed to create video encoder
D/CameraSource( 298): reset: E
W/CameraClient( 298): attempt to use a locked camera from a different process (old pid 298, new pid 22939)
E/QCameraStateMachine( 298): stateMachine : m_state [2], evt [16]
D/CameraSource( 298): reset: X
E/MediaRecorder(22939): start failed: -2147483648
E/CAM_VideoModule(22939): Could not start media recorder.
E/CAM_VideoModule(22939): java.lang.RuntimeException: start failed.
E/CAM_VideoModule(22939): at android.media.MediaRecorder.start(Native Method)
E/CAM_VideoModule(22939): at com.android.camera.VideoModule$11.onStorageUpdateDone(VideoModule.java:1388)
E/CAM_VideoModule(22939): at com.android.camera.CameraActivity$18.onPostExecute(CameraActivity.java:2164)
E/CAM_VideoModule(22939): at com.android.camera.CameraActivity$18.onPostExecute(CameraActivity.java:2149)
I'm thinking it's really related to this commit being close, but not sure: https://github.com/TeamRegular/android_frameworks_av/commit/d5de1e7b636ba5673a2b20be8685287ff60fb487
Did some Googling.
W/ACodec ( 307): do not know color format 0x7fa30c04 = 2141391876
http://alumnus.caltech.edu/~heirich/styled-6/index.html
COLOR_QCOM_FormatYUV420SemiPlanar32m
W/ACodec ( 307): do not know color format 0x7f000789 = 2130708361
https://lists.freedesktop.org/archiv...er/043721.html
OMX_COLOR_FormatAndroidOpaque
Thoughts?