Related
Hello,
I have a Samsung Galaxy s6 Edge G925F with custom rom, i have a problem with my sensor.
I turn my auto-brightness in ON and nothing chang, it's always stay at the same level of brightness, i tested it, if it was a hardware problem with calling "*#0*#" but not, it work perfectly in that.
and for the proximity sensor, when i call someone, the screen turn automaticaly in black, same think, i tried to test hardware, it's work, when i call someone with What's App for exemple, it's work, but it's not work with phone dialer.
(Sorry for my bad english, i'm french)
Can someone help me ? I tried an other rom, same problem, other bootloader / modem, same again.
Same issue here! Don't know what the problem is. Sensor is working when being tested, but somehow system is not receiving that info. Factory reset did not help either. I am on stock everything (5.1.1).
and you have no problem with brightness in mode auto ?
Auto brightness is not working either. It is always at same output value, no matter what I do. And also navigation buttons are not lighting up anymore.
Phone is all stock. Not sure if I should try with other roms...
Sent from my Nexus 6 using Tapatalk
Oh, we have the exact same problem, I just noticed that, my softkey lighting doesn't work too.
Have you got a problem like that, you put your headset's jack into your phone, and It's not detected by your phone ? İ have that issue too, I bought a jack, dock replacement for replace this part, I will tell you what happening next.
I saw your thread, did you disassembly your s6 ? By you or other guys.
If you find any solution to this problem please report it here and I will do the same. Hope we will be able to fix it .
Sent from my Nexus 6 using Tapatalk
Emzelim said:
Have you got a problem like that, you put your headset's jack into your phone, and It's not detected by your phone ? İ have that issue too, I bought a jack, dock replacement for replace this part, I will tell you what happening next.
I saw your thread, did you disassembly your s6 ? By you or other guys.
Click to expand...
Click to collapse
I just checked this, and unfortunately it's not working...not recognized by the phone . Guess it's identical problem.
I did not touch any internals...just sent this phone for repairs, but they did not fix it because they found out that someone was already open it before. Now I do not know what to do.
Sent from my Nexus 6 using Tapatalk
Okay, then, The Phone was already opened before, I will tell you if I found something for that.
Emzelim said:
Okay, then, The Phone was already opened before, I will tell you if I found something for that.
Click to expand...
Click to collapse
Yes, as I wrote in my original thread phone had a problem with faulty battery. It was refurbished phone and seller stated that it has 2 years of manufacturer warranty, but as it turned out warranty was void because someone damaged that battery before and tried to fix it with some tape.
btw. everything else was working fine before we sent the phone for service. When they returned it all these problems started. I have ordered new battery and will replace that by my own I guess because Samsung is not responding to our messages. I guess my girlfriend will have to live with these issues if we are not able to fix them...
if you think your auto brightness is not working check out this app. If that doesn't work then your sensors are faulty/defective and contact Samsung support or your authorized reseller
https://play.google.com/store/apps/details?id=com.vito.lux&hl=en
paviol said:
if you think your auto brightness is not working check out this app. If that doesn't work then your sensors are faulty/defective and contact Samsung support or your authorized reseller
https://play.google.com/store/apps/details?id=com.vito.lux&hl=en
Click to expand...
Click to collapse
As we mentioned already...every sensor checking app is reporting that senors are working just fine. I removed the battery so can't try this app right now, but will definitely check as soon as I can, thanks.
Update regarding my situation: Since everything failed to fix this device or receive our money back, I decided to open the phone and check if anything else is wrong with it (besides battery) and guess what...audio jack port was completely broken. Plugging in headphones was working before it went to official repair centre, and now I know they broke it. But still I can't do anything about it because Samsung is refusing to fix it. My best bet is to replace that part together with battery and live with other issues.
Worst service I have ever experienced...
Ok so, I will receive this replacement part (jack) this week, I hope it will fix the other problems too.
I'll tell you what happen after that.
Emzelim said:
Ok so, I will receive this replacement part (jack) this week, I hope it will fix the other problems too.
I'll tell you what happen after that.
Click to expand...
Click to collapse
Please do! I also ordered whole usb connector board with headphone jack on it. Let's hope it will work.
btw. I just contented old battery back and tried this app. It is working great, so sensors are fine.
Hıı, I have A good news for you, I just replaced the usb, Jack part and all is working back, proximity sensor, auto brightness control and jack.
Good luck for you ?
Emzelim said:
Hıı, I have A good news for you, I just replaced the usb, Jack part and all is working back, proximity sensor, auto brightness control and jack.
Good luck for you ?
Click to expand...
Click to collapse
Same here! Just replaced and packed everything up few minutes ago. Working great!! Finally! I'm glad we managed to fix this one ...
Just dry up the edges. Try to blow the corners. It is just a little bit wet because the corners have little gaps that let water and dust in. I blow dried my phone and it fixed the problem. If you try to wipe screen with water and it gets inside the edges, problem comes back again
Ich have the same problem. But how can it be a hardware issue when the sensors are working in test module? I don't want to send it in :/
Mine was having this exact problem and was solved by an update I didn't know existed. Go to where you find your updates and download any available. Mine worked great again afterwards. If that doesn't work, Try clearing your cache partition.
prov1kenobi said:
Mine was having this exact problem and was solved by an update I didn't know existed. Go to where you find your updates and download any available. Mine worked great again afterwards. If that doesn't work, Try clearing your cache partition.
Click to expand...
Click to collapse
we are already finishing the year 2017 and apparently samsung continues to present the same defects !! Were you able to solve your sensor problem? Please take a look at my post and please help me!
https://forum.xda-developers.com/galaxy-s8/help/sensors-android-update-please-help-t3721874 join please <<<<<<<<<<<
Hi guys,
I'm planning of buying a Le max 2 but the fingerprint sensor issue is a problem..
I'd like to know if it might affect more x820/821 than x822 that seems to be out a bit later and might get fixed?
Hope. You can help me this phone seems awesome!
No Problems on Revolution Rom. Works flawless
Gesendet von meinem Le X820 mit Tapatalk
kamnikaz said:
Hi guys,
I'm planning of buying a Le max 2 but the fingerprint sensor issue is a problem..
I'd like to know if it might affect more x820/821 than x822 that seems to be out a bit later and might get fixed?
Hope. You can help me this phone seems awesome!
Click to expand...
Click to collapse
Hello there is a serious problem if you do need touch sensor. For me eg it is bad to unlock phone after 1 minute if you are at home. There is somehow probable you will buy the phone and it will fail.Some guys who bought it on Ali received about 30USD for the failed touch sensor.
Regards Filozof71
Sent from my Le X820 using Tapatalk
Filozof71 said:
Hello there is a serious problem if you do need touch sensor. For me eg it is bad to unlock phone after 1 minute if you are at home. There is somehow probable you will buy the phone and it will fail.Some guys who bought it on Ali received about 30USD for the failed touch sensor.
Regards Filozof71
Sent from my Le X820 using Tapatalk
Click to expand...
Click to collapse
I've read that kind of things...
But my real concern is to know if x822 is as much affected as x820
Someone said to use the same finger 3 times instead of 3 different fingers. Try it.
Me with 822 and my fingerprint sensor is totally dead
I think that the x822 is the version which has more problems with the fingerprint, cause the fingerprint on my 822 is totally dead.
fingerprint issues are very often software problems, not hardware related.
My fingerprint sensor didn't work with several roms. After switching to 21s everything is o.k.
My is dead with 21s..i put 15s,16s and all roms in this forum but nothing to do..
On my x822 sensor also dead. Worked for 1 day on Indian rom 19s.
For the rest phone is really good.
I read in one forum that flashing 15s someone have reabilitate the fingerprint. I don t know if it s only a software problem..
on my X821 it's working fine. no instant unlock, but maybe 1 second
Mine is working well on stock 21s
I have x822 and fingerprint works very well with this rom
http://forum.xda-developers.com/le-max-2/development/revolution-21s-eui-5-9-beta-developers-t3493604
Mine stops work with 21s
E620se said:
on my X821 it's working fine. no instant unlock, but maybe 1 second
Click to expand...
Click to collapse
Hi Ive the same version,mine doesn't unlock when device is in sleep,any ideas?However it works flawlessly when I turn on the screen.Im on eui 19s official
RISHI RAJ said:
Hi Ive the same version,mine doesn't unlock when device is in sleep,any ideas?However it works flawlessly when I turn on the screen.Im on eui 19s official
Click to expand...
Click to collapse
But actually it is an "always on" fingerprint reader, isn't it?
I am also interested to buy the device but a bit scared to invest and find myself with a non-working fp reader...
body150165 said:
But actually it is an "always on" fingerprint reader, isn't it?
I am also interested to buy the device but a bit scared to invest and find myself with a non-working fp reader...
Click to expand...
Click to collapse
It is a great deal, actually i do recommend you to not buy the x822 i have checked several comments and i determined that is the version which has more issues withe fingerprint, including mine which is a x822.
However maybe i am wrong, please feel free to ket me know if i am
My first X822 FP was dead after a day. The replacement unit's FP only lasted for a few hours. Manufacture date for both units are July, 2016. I strongly believe this batch of units are all defective. If you read the Chinese forum, there are many units with defective FPs bought recently on 11/11/16 (the big sale in China).
Unfortunately, I bought it from Hong Kong while I was on vacation, so I cannot return it or have it replaced. I have to live with it. Other than the FP issue, it's a great phone for the price.
js321 said:
My first X822 FP was dead after a day. The replacement unit's FP only lasted for a few hours. Manufacture date for both units are July, 2016. I strongly believe this batch of units are all defective. If you read the Chinese forum, there are many units with defective FPs bought recently on 11/11/16 (the big sale in China).
Unfortunately, I bought it from Hong Kong while I was on vacation, so I cannot return it or have it replaced. I have to live with it. Other than the FP issue, it's a great phone for the price.
Click to expand...
Click to collapse
Yes I can confirm this, I bought an x822 from July 2016 and the fingerprint scanner was dead on arrival.
my fp is dead,probably hardware,tried diffrent roms and anything,it just wont register,so if ill order this will i be able to fix it by myself?
damn
same thing happened, phone not even 1 week old.
(scheiß hurensohn firma)
angryharambe said:
same thing happened, phone not even 1 week old.
(scheiß hurensohn firma)
Click to expand...
Click to collapse
That's the exact problem,I ordered from aliexpress too and the phone just went like this after 2 days of usuage,it's currently about 4 months old and i just wish i could replace the fp scanner on my country
idan445 said:
That's the exact problem,I ordered from aliexpress too and the phone just went like this after 2 days of usuage,it's currently about 4 months old and i just wish i could replace the fp scanner on my country
Click to expand...
Click to collapse
feel kind of dumb now for not doing enough research before buying it.
EDIT: received official response from le eco trought email contact
their problem solution isn't any different than any of here floating around
btw here the response.
Good day!
Thank you for contacting LeEco US Customer Service. We are more than happy to assist you.
We really apologize for the inconvenience it has caused you, rest assured that we will do our best to resolve your concern as soon as possible.
Based on your email, your Le Max2 fingerprint was stopped working.
To further assist you, please follow these steps below:
（1） Update phone software to the latest version,
（2） Go to Settings > Fingerprint & Password > Fingerprint Calibration > Start Calibrating > Done.
（3）If calibration failed, please try again. If it fails again, it is a hardware problem. Please contact where you purchased phone for the after-sale policy. If calibration is successful, then restart the phone.
（4）Try to register a fingerprint after restart. If there is no vibration, no response and no prompt, then it should be a hardware problem. Please contact where you purchased phone for the after-sale policy.
Any further questions, please feel free to contact us or visit our help page: http://www.lemall.com/us/helpself.html.
Thank you and have a wonderful day!
Sincerely,
James
LeEco US Customer Service Center
Website: http://www.lemall.com
Email: [email protected]
Forum: forum.letv.com/us
Le Mall: 855-343-6688
Now that's some next level bull****,there's definitely a hardware flaw and they're not ready to admit it
Heyyo, have you tried flashing the latest modem firmware? It helps with the fingerprint sensor a lot, especially on custom ROMs. Modem firmware also affects other hardware. Fixed the FP for my x829 using Chinese 23s firmware.
https://yadi.sk/d/5v2p3F7o3GJBxn
ThE_MarD said:
Heyyo, have you tried flashing the latest modem firmware? It helps with the fingerprint sensor a lot, especially on custom ROMs. Modem firmware also affects other hardware. Fixed the FP for my x829 using Chinese 23s firmware.
https://yadi.sk/d/5v2p3F7o3GJBxn
Click to expand...
Click to collapse
Already tried this but it doesn't work..
I already contact banggood for this flawed product, they ask me to send it back and refund. But if i do this i lost lots of money because i pay 60 usd duty and tax when i get this.
Plus i must pay th shipping back to their warehouse..
Suck..
Shame on you Letv!
Enviado de meu Le X820 usando Tapatalk
Modem flashing is niet the sollution.
Any other ideas?
Hi all! So none of the ROMs here can fix the FP problem? I just got the phone not more than a week from Gearbest, then the FP just stop functioning all of the sudden. It can't even respond for the camera shutter
However, many thanks to those who posted excellent tutorials here. I just succesfully installed TWRP, but doesn't have any clue which ROMs might be the best bet to get the FP working again. Any advice will be greatly appreciated.
I got my Le Max2 3 month ago. The FP was dead the second day after I receive it. Feel very bad about it. Tried many ROMs and modems, none of them work. This week, I tried the new Small EUI V15 with 26S ROM, the FP magically comes alive again. If you installed TWRP, it is good to the 26S rom to revive the dead FP.
the only rom that worked for me is RR
CN Firmware s26 fixed my FP issues on Pure Nexus Rom
godhek said:
Hi all! So none of the ROMs here can fix the FP problem? I just got the phone not more than a week from Gearbest, then the FP just stop functioning all of the sudden. It can't even respond for the camera shutter
However, many thanks to those who posted excellent tutorials here. I just succesfully installed TWRP, but doesn't have any clue which ROMs might be the best bet to get the FP working again. Any advice will be greatly appreciated.
Click to expand...
Click to collapse
If sensor is totally dead only solution is to order a new one and replacing it.
Enviado desde mi LEX820 mediante Tapatalk
Based on randomness, I think FP is revived due to timing. I think you can flash any rom to revive it. Just that you need to keep flashing until it works
No it's Firmware related. I tried so many Roms until i read that CN fw s26 would fix IT and it did.
Hi all! Thanks for all the replies and advices in this thread. Just want to give you an update on my situation, where I just installed Aurel small EUI rom 15.1. Unfortunately, my fp still doesn't work
But, Aurel's rom is much better than the stock vendor rom that came preinstalled (BIG thanks to Aurel!!)
Blubber120 said:
CN Firmware s26 fixed my FP issues on Pure Nexus Rom
Click to expand...
Click to collapse
Where did you get CN 26 I only see CN 23s could you give me a link
Sorry my fault, it hast been s16
Mine just sprung back to life. I decided to try calibrating again just as I was reading this post. I calibrated it about 12 times, then restarted the phone. After that, I could register my fp again.
When it stopped working more than two months ago, I almost ordered the sensor, because I read here that it was definitely the problem, but then someone else said he could take pics by tapping the fp sensor. When I tried that, it worked. So, I concluded it was a software issue. I've been trying other stuff without success since it stopped working, but luckily, it worked today.
N.B.
I was on 23s when it stopped working. I flashed 26s immediately, and the other firmware someone uploaded, but there was no joy. However, I did a reset yesterday, and flashed back to 23s. I don't know if that actually helped.
Phone = x829
---------- Post added at 01:13 PM ---------- Previous post was at 01:06 PM ----------
chetermaat said:
Where did you get CN 26 I only see CN 23s could you give me a link
Click to expand...
Click to collapse
I installed the one in the link below.
https://forum.xda-developers.com/le-max-2/development/lex2x820-cn-5-9-026s-t3597041
So I recently bought two Le Max 2 X829's from Banggood for $196 each and didn't find out about the fingerprint sensor problem until after... I haven't received them yet, but I would like to know what solutions have you guys been offered when you contact your sellers.
I haven't had any problems with Banggood or their customer service. When something I buy is defective, I just email them directly, with a description of the defect, pictures and a YouTube video too if possible, and I make sure to tell them that I have already troubleshooted, checked the forums, and tell them that the defect is common so that they don't give me the run around. They usually go straight to offering me replacement parts for free, or a partial refund if the device still "works" and can be fixed by me, or simply a return label if I insist that I want to return it.
Chime in...
Nothings, its too expenisve to send it back to China. I just resell them here in the Netherlands, you will easily get your money back.
its a software issue, if u change the rom it gonna work good!
if u want the stock the 23s Chinese ROM and 19s Indian ROM are the best....
but theres are more roms that can help you with that!
Read in the ROMs Forum!
sick707 said:
its a software issue, if u change the rom it gonna work good!
if u want the stock the 23s Chinese ROM and 19s Indian ROM are the best....
but theres are more roms that can help you with that!
Read in the ROMs Forum!
Click to expand...
Click to collapse
Dont respond if you dont know what you are talking about. Its a hardware issue!. Software can only fix it temporarily or kick it back into life sometimes.
MerlijnD said:
Dont respond if you dont know what you are talking about. Its a hardware issue!. Software can only fix it temporarily or kick it back into life sometimes.
Click to expand...
Click to collapse
Broo i went through the same issue and i moves to SmallEui by Aurel and its working perfect(sometime fails but normal) mi x829 came with 16s and it was a sh*** soon i flash the rom the fingerprint works better! Try that! (Month ago)
MerlijnD said:
Dont respond if you dont know what you are talking about. Its a hardware issue!. Software can only fix it temporarily or kick it back into life sometimes.
Click to expand...
Click to collapse
Why don't you just stop talking about things you don't know anything about!?! I guess you haven't read only one post in fingerprint issue thread. Otherwise you wouldn't write something like this.
Just search for my posts inside the main fingerprint issue thread to get yourself some information about what you are claiming to know.
Lizard82 said:
Why don't you just stop talking about things you don't know anything about!?! I guess you haven't read only one post in fingerprint issue thread. Otherwise you wouldn't write something like this.
Just search for my posts inside the main fingerprint issue thread to get yourself some information about what you are claiming to know.
Click to expand...
Click to collapse
I've read through several of the threads and it was a massive waste of time. The forum for the Le Max 2 is pretty disorganized, there's very little moderation, and no consensus can be drawn as far as solving the fingerprint sensor problem is concerned. Just a bunch of inexperienced people rambling and contradicting each other.
I have plenty of experience and two Le Max 2's on the way, so I'll draw up some tests and make an objective observation when I receive them.
With the unorganized and inexperienced points you are absolutely right. That's why I give up on explaining to many people how to solve the problem. Me and my girlfriend are both running Le Max 2 with madmax rom for long time now. In the beginning my device had a totally dead fingerprint scanner. After some research, trying few settings and stuff I was able to break it down to Qualcomm drivers/firmware.
In German board we were able to get most of the phones FP running again. (Experienced users phones).
Nearly all devices with Dead FP's are running on old couco 92 rom.
If you're facing issues after receiving the phones flash another room ( stock Chinese or custom based stock from the forum) and try to follow the instructions i wrote in the fingerprint section...
That's said, my girlfriend and I have the x820 version.
Give it a shot and you will see the point of the problem and how to solve it...
Lizard82 said:
With the unorganized and inexperienced points you are absolutely right. That's why I give up on explaining to many people how to solve the problem. Me and my girlfriend are both running Le Max 2 with madmax rom for long time now. In the beginning my device had a totally dead fingerprint scanner. After some research, trying few settings and stuff I was able to break it down to Qualcomm drivers/firmware.
In German board we were able to get most of the phones FP running again. (Experienced users phones).
Nearly all devices with Dead FP's are running on old couco 92 rom.
If you're facing issues after receiving the phones flash another room ( stock Chinese or custom based stock from the forum) and try to follow the instructions i wrote in the fingerprint section...
That's said, my girlfriend and I have the x820 version.
Give it a shot and you will see the point of the problem and how to solve it...
Click to expand...
Click to collapse
I have x829 and changing roms, modems, unbrick method, haven't worked in bringing FP back to life. So it may be mixed, in my case seems like hardware issue.
Read my posts... It's related to the Qualcomm drivers...
Lizard82 said:
Read my posts... It's related to the Qualcomm drivers...
Click to expand...
Click to collapse
No it isnt, ive had 4 le max 2. First thing i did is flash through qdloader mode, hell ive even soldered wires and flashed directly to the NAND ufs chip with a raspberry. So please dont think im talking bull****.
MerlijnD said:
No it isnt, ive had 4 le max 2. First thing i did is flash through qdloader mode, hell ive even soldered wires and flashed directly to the NAND ufs chip with a raspberry. So please dont think im talking bull****.
Click to expand...
Click to collapse
Your took it to another level!
I'll be interested to see videos of that
Peace out
---------- Post added at 04:38 AM ---------- Previous post was at 04:36 AM ----------
Lizard82 said:
With the unorganized and inexperienced points you are absolutely right. That's why I give up on explaining to many people how to solve the problem. Me and my girlfriend are both running Le Max 2 with madmax rom for long time now. In the beginning my device had a totally dead fingerprint scanner. After some research, trying few settings and stuff I was able to break it down to Qualcomm drivers/firmware.
In German board we were able to get most of the phones FP running again. (Experienced users phones).
Nearly all devices with Dead FP's are running on old couco 92 rom.
If you're facing issues after receiving the phones flash another room ( stock Chinese or custom based stock from the forum) and try to follow the instructions i wrote in the fingerprint section...
That's said, my girlfriend and I have the x820 version.
Give it a shot and you will see the point of the problem and how to solve it...
Click to expand...
Click to collapse
Does that Rom has English?
Also could you point me to this forum please.
Thx
Lizard82 said:
Read my posts... It's related to the Qualcomm drivers...
Click to expand...
Click to collapse
Nope, i tried that but fp still not working.
I flash several rom from 16s to 20s cn, 23s cn and 19s india, also 3 cusrom such rr. On each rom i tried to flash several modem firmware, 16s usa, 19s india, 23s cn and finaly latest dev version from yadi.sk/xxxxx..
So i guess you just lucky.. ?
On my case fp work only several hour since unboxing. Now it cant recognize any fp when i tried to register it. But the weird part is sometime it kinda work for taking pictures using camera. I said kinda because it works 50% of the time, when working i touch once but the camera is taking 4 or 5 pictures.
---------- Post added at 03:42 PM ---------- Previous post was at 03:31 PM ----------
Oh forgot, i bought this problematic x829 4/64 phone on banggood. I already mail them, they only offer me to resend it back and full refund. But that too expensive, i must pay for shipping back to china plus i already paid 60 usd for duty and tax when i got it.
Fyi i already bought several x820 and 1pcs x829 6/128 from aliexpress, all working great. another x829 6/128 coming this week from aliexpress, i hope it doesnt defective like this one.
It is HW related issue for sure,i tried all of fixes laying around,nothing help...X829 4/64 from banggood
if all probematic x829 came from banggod, let us join our voices and ask them to give us solution...
alveox said:
if all probematic x829 came from banggod, let us join our voices and ask them to give us solution...
Click to expand...
Click to collapse
Tinydeal... same thing here
haven't had fp before - so i don't rlly miss it
Gearbest
Enviado de meu Le X820 usando Tapatalk
I flashed the Indian 19s firmware last night and the finger print scanner is working back now, though it is a bit slow (not as fast as Redmi Note 3 ), but it works 100% of the times. The only thing abnormal I have done is that I have scanned my finger twice ( same finger).
Previously I tried all tricks with LOS and Mokee and could not get the Finger Print scanner to work.
hawamahal said:
I flashed the Indian 19s firmware last night and the finger print scanner is working back now, though it is a bit slow (not as fast as Redmi Note 3 ), but it works 100% of the times. The only thing abnormal I have done is that I have scanned my finger twice ( same finger).
Previously I tried all tricks with LOS and Mokee and could not get the Finger Print scanner to work.
Click to expand...
Click to collapse
what problem you have before? slow respond fp or unrecognized fp when adding new fingerprint?
alveox said:
what problem you have before? slow respond fp or unrecognized fp when adding new fingerprint?
Click to expand...
Click to collapse
The problem i had before was that the FP sensor did not respond when trying to unlock i.e. looks like it was OFF. Previously even if you left the finger on the sensor for 10 seconds i did not react at all. The only cases when the FP reader worked was immediately after locking. Also the sensor did not have any problem adding fingerprints.
I still face touch issue after latest update.Which rom and kernel will help me to solve this problem
me too bro, its gone real bad now, due to ghost touches the entire experience is so sluggish, even my dad's redmi 4 has better touch than my poco
nISTHUR said:
me too bro, its gone real bad now, due to ghost touches the entire experience is so sluggish, even my dad's redmi 4 has better touch than my poco
Click to expand...
Click to collapse
I am pretty much sure it is a hardware problem.Are you considering replacing it?
I've already got screen replaced once as my replacement period according to Xiaomi viz. 3mths was over so i doubt there is any solution
use Pixel experience rom...i switched to pixel rom after 10.3.4.0
try malakas display oc kernel...
I don't think you can fix it. it's a hardware issue.
I could tell you my version of the digitiser which is the one without problems but ever since i updated to 10.3.4 Xiaomi removed that Info from tapping 5 times on the kennel info and then lcm info.
Luckily i got the new panel without touch issues.
I'll try and find another way to check my digitiser model again but if my memory doesn't deceive me i think the tiamat is the one that has problems.
Edit: mine is ebbg digitiser not tiamat. Maybe you can improve with a different kennel.
AliNT77 said:
try malakas display oc kernel...
Click to expand...
Click to collapse
Display OC is for display and not for touchscreen. It increases the refresh rate of the Display and it has nothing to do with touch responsiveness.
thunderc8 said:
I don't think you can fix it. it's a hardware issue.
I could tell you my version of the digitiser which is the one without problems but ever since i updated to 10.3.4 Xiaomi removed that Info from tapping 5 times on the kennel info and then lcm info.
Luckily i got the new panel without touch issues.
I'll try and find another way to check my digitiser model again but if my memory doesn't deceive me i think the tiamat is the one that has problems.
Edit: mine is ebbg digitiser not tiamat. Maybe you can improve with a different kennel.
Click to expand...
Click to collapse
how did you checked the digitiser info?
After disable pocket/bag mode in settings, no more touch issues in my pocophone. I use miui.eu beta + franco kernel
Try the last beta version
Dynamo2020 said:
I still face touch issue after latest update.Which rom and kernel will help me to solve this problem
Click to expand...
Click to collapse
.
.
Could someone please explain these touch issues to me?
Describe them so I can also look for them as mine is still under replacement period.
Thanks
Xebeck said:
.
.
Could someone please explain these touch issues to me?
Describe them so I can also look for them as mine is still under replacement period.
Thanks
Click to expand...
Click to collapse
In my case 2 days ago I was in a concert and I wanted to take some shoots. Opened the camera app, and touch was not responding at all.
I turn off the screen, then on, randomly started to press any place of the screen until I was able to get away from the app. (I restarted the phone few times and same thing happen)