So i was kind of fiddling with my redmi note 3 in kernel auditor and had installed guyvers kernel. So what happended is that went to gpu settings and then selected the gpu governor as something like gpupow.... i dont remember and my phone just frose and rebooted and on reboot i selected the same option again and then my phone rebooted again and did not boot again and i am REALLY SCARED BECAUSE MY FATHER WILL SCOLD ME BEACAUSE OF THIS CLEARING DALVIK CACHE AND CACHE HELPED NOTHING RESTROING BOOT IMAGE FROM ZCX TWRP NO HELP !!!!!!!!!!!!!!!!!AND AT LAST FLASHED THE SAME KERNEL AGAIN AND STILL NOTHING!!!!!!!!!!!!!!!! I REALLY NEED SOPME HELP AS THIS PHONE IS MY DAILY DRIVER AND I MAKE SOME IMP CALLS WITH THIS AND PLAY A LOT OF GAMES I AM FRAKING OUT PLEASE HELP ME ANYBODY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ALSO IT GIVES ME VIBRATION FEEDBACK WHEN PRESS ANY BUTTON AND ITS NOT BOOTING !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Androbots said:
So i was kind of fiddling with my redmi note 3 in kernel auditor and had installed guyvers kernel. So what happended is that went to gpu settings and then selected the gpu governor as something like gpupow.... i dont remember and my phone just frose and rebooted and on reboot i selected the same option again and then my phone rebooted again and did not boot again and i am REALLY SCARED BECAUSE MY FATHER WILL SCOLD ME BEACAUSE OF THIS CLEARING DALVIK CACHE AND CACHE HELPED NOTHING RESTROING BOOT IMAGE FROM ZCX TWRP NO HELP !!!!!!!!!!!!!!!!!AND AT LAST FLASHED THE SAME KERNEL AGAIN AND STILL NOTHING!!!!!!!!!!!!!!!! I REALLY NEED SOPME HELP AS THIS PHONE IS MY DAILY DRIVER AND I MAKE SOME IMP CALLS WITH THIS AND PLAY A LOT OF GAMES I AM FRAKING OUT PLEASE HELP ME ANYBODY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ALSO IT GIVES ME VIBRATION FEEDBACK WHEN PRESS ANY BUTTON AND ITS NOT BOOTING !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Just flash the rom again without wiping anything. The same rom that you had when all this happened. Not any other. Let it boot up. Give it 10 minutes at least. Try and report back.
Sent from my kenzo using Tapatalk
1emrys1 said:
just flash the rom again without wiping anything. The same rom that you had when all this happened. Not any other. Let it boot up. Give it 10 minutes at least. Try and report back.
Sent from my kenzo using tapatalk
Click to expand...
Click to collapse
ok check this..
1emrys1 said:
just flash the rom again without wiping anything. The same rom that you had when all this happened. Not any other. Let it boot up. Give it 10 minutes at least. Try and report back.
Sent from my kenzo using tapatalk
Click to expand...
Click to collapse
also i am using zcx can i flash the lastest miui rom and hope everything will be ok??? Right now i am in miuiv8.1.4.0 android 6.0.1
please somebody reply
Can you access recovery mode?
If yes then do a complete fresh installation of a new ROM
Androbots said:
So i was kind of fiddling with my redmi note 3 in kernel auditor and had installed guyvers kernel. So what happended is that went to gpu settings and then selected the gpu governor as something like gpupow.... i dont remember and my phone just frose and rebooted and on reboot i selected the same option again and then my phone rebooted again and did not boot again and i am REALLY SCARED BECAUSE MY FATHER WILL SCOLD ME BEACAUSE OF THIS CLEARING DALVIK CACHE AND CACHE HELPED NOTHING RESTROING BOOT IMAGE FROM ZCX TWRP NO HELP !!!!!!!!!!!!!!!!!AND AT LAST FLASHED THE SAME KERNEL AGAIN AND STILL NOTHING!!!!!!!!!!!!!!!! I REALLY NEED SOPME HELP AS THIS PHONE IS MY DAILY DRIVER AND I MAKE SOME IMP CALLS WITH THIS AND PLAY A LOT OF GAMES I AM FRAKING OUT PLEASE HELP ME ANYBODY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ALSO IT GIVES ME VIBRATION FEEDBACK WHEN PRESS ANY BUTTON AND ITS NOT BOOTING !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
lol, nothing has happened, dnt panic, just boot into recovery manually by pressing power and volume+ buttons. Flash the the same rom firmware, wipe dalvik cache and Reboot, give it 10-15mins.. if this doesnt works then wipe everything(except storages).. then flash rom.
lol.
Calm down buddy. If you can get to your recovery flash the ROM you were using. If it was MiUI, flash lazyflasher/universal boot.img patcher after flashing the preferred MiUI ROM.
Flash another kernel which doesn't support gpu_governor, or wipe data.
Ok well thanks everybody for your help I have now found a twrp backup restore data and i am now up and running again aaahhhh!
Lol I bricked my phone so many times, i can't even remember. It would be very shameful if my parents would find out about that...but then again...it is my phone, bought it with my own money.
c_/\/\_k said:
lol, nothing has happened, dnt panic, just boot into recovery manually by pressing power and volume+ buttons. Flash the the same rom firmware, wipe dalvik cache and Reboot, give it 10-15mins.. if this doesnt works then wipe everything(except storages).. then flash rom.
Click to expand...
Click to collapse
Sam.1211 said:
Lol I bricked my phone so many times, i can't even remember. It would be very shameful if my parents would find out about that...but then again...it is my phone, bought it with my own money.
Click to expand...
Click to collapse
Unfortunately that's not the case here my parents bought this phone with their own money thank God my father was away last night and I fixed.
Related
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
blindox said:
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
Click to expand...
Click to collapse
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
+1
That would be my guess, the recovery.
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
live4nyy said:
+1
That would be my guess, the recovery.
Click to expand...
Click to collapse
ltdanno360 said:
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Be sure to let us know if it worked in case anyone else with the same issue can find the answer much easier.
blindox said:
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
Click to expand...
Click to collapse
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
blindox said:
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Click to expand...
Click to collapse
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
hello my friend,
i just made the WIPE CACHE AND WIPE DALVIK CACHE and the install of the ROM.
When i saw the screen NEUTRINO I was happy, until the time the ''system loading" getting black out for a couple seconds and then come right back. I knew there was something wrong.
Now I will make the process again with the factory data reset and then i will post what happened
Thanks
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
Yes, romracer is recommended. It is the only recovery that is specifically developed for the Atrix 4G. You could also try the TRWP Recovery but romracer's recovery is proven to work well and recommended by most.
Glad everything worked out.
blindox said:
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
Click to expand...
Click to collapse
I have a Galaxy S2 intl version. I was on carbon rom with siyah kernel. All was fine then suddenly it force reboots. but while rebooting it just didn't happen. Nothing happened. The screen logo just flashes for a second and then disappears, and then nothing happens. I tried entering the recovery mode, but doesn't enter the recovery mode. The download mode is working just fine. So I flashed a custom rom with siyah kernel using ODIN, hoping it would help, but nothing seems to happen though both rom and kernel are flashing perfectly alright! Please help me recover my phone guys. Would be extremely grateful, please!
Don't use siyah on custom roms. Flash Dorimanx 9.xx through odin . Recovery should now work. Go into recovery and factory reset clear the caches and reboot. Should work fine after this.
Remember
Dorimanx 8.xx is for stock and custom rom
Dorimanx9.xx is for custom only.
andrewwright said:
Don't use siyah on custom roms. Flash Dorimanx 9.xx through odin . Recovery should now work. Go into recovery and factory reset clear the caches and reboot. Should work fine after this.
Remember
Dorimanx 8.xx is for stock and custom rom
Dorimanx9.xx is for custom only.
Click to expand...
Click to collapse
Okay so I left my phone overnight, with the battery pulled out. I had flashed a stock rom before going to sleep. And i woke up and just put the battery back in to flash Dorimanx, and, something happened. The phone entered recovery mode :cyclops: I had been trying to get in the damn thing for the whole day yesterday, and today it happened, so i did as you said, wiping all that, and rebooted the phone. In a little odd fashion though, but it booted up and the setup process started, and it's working fine now. So, now I'm on a custom rom JB 4.1.2 and siyah kernel. I want a stable 4.3 on my phone. What can I do, sir? I dont wanna run into trouble again, so what would be a safe way?
emviveem said:
Okay so I left my phone overnight, with the battery pulled out. I had flashed a stock rom before going to sleep. And i woke up and just put the battery back in to flash Dorimanx, and, something happened. The phone entered recovery mode :cyclops: I had been trying to get in the damn thing for the whole day yesterday, and today it happened, so i did as you said, wiping all that, and rebooted the phone. In a little odd fashion though, but it booted up and the setup process started, and it's working fine now. So, now I'm on a custom rom JB 4.1.2 and siyah kernel. I want a stable 4.3 on my phone. What can I do, sir? I dont wanna run into trouble again, so what would be a safe way?
Click to expand...
Click to collapse
I am installing the Carbon Rom, JB 4.3 as I already have a copy of it on my phone, and I'm doing it with the same previous kernel on it, ie, Siyah-s2-v5.0.1. Should this create a problem?
Yes it will. DONT USE SIYAH. Use dorimanx 9.xx for any custom rom. Including carbon rom
andrewwright said:
Yes it will. DONT USE SIYAH. Use dorimanx 9.xx for any custom rom. Including carbon rom
Click to expand...
Click to collapse
Okay now I'm really sorry it's starting to bug you but my phone seems to develop new problems every time I reboot. Now, I havent changed anything, On a stock rom with siyah kernel. and i rebooted, and stuck again! I am able to enter recovery mode though (CWM recovery) and download mode also. BUT, now what happens when I boot is, the samsung logo shows with the triangle and, the boot tune plays but there's nothing on the screen, it's just black, and a few secs later, it gives a small vibration, all still with the phone screen black. Later i get to know that my phone has apparently turned on, but the screen is not showing anything. I called my cell and to my surprise it rings meaning its actually ON!! Why is the screen not ON then?? Please help, kind sir! Also if you could provide me with links to the required kernels/roms or whatever else required. Eagerly awaiting your saviour reply! :crying:
You need to go bk to stock with Odin. Test and see if it still happened with fully stock rom and kernel.
andrewwright said:
You need to go bk to stock with Odin. Test and see if it still happened with fully stock rom and kernel.
Click to expand...
Click to collapse
Hey, problem solved now, dont know what it was though! What i did was flash the Carbon rom with siyah, and it booted and then i flashed dorimanx and its working fine now. But the gapps package is reacting weirdly. I flashed it perfectly and when i reboot, it says "Google + stopped working" and then i check the app menu and there's no google apps whatsoever. http://goo.im/gapps/gapps-jb-20130813-signed.zip I then installed play store apk and it opened up and looked fine but then that is all it did! It won't download anything. What shall I do?
Full wipe. So format
Data
System
Preload
Cache
Dalvik cache
Then flash
Rom and gapps
Then flash dori
Then reboot
andrewwright said:
Full wipe. So format
Data
System
Preload
Cache
Dalvik cache
Then flash
Rom and gapps
Then flash dori
Then reboot
Click to expand...
Click to collapse
I did everything! I never got the option to format preload though. Everything else went smooth. Rebooted. Same problem persists.
Go bk to recovery and factory reset. Also maybe if that don't work redownload gapps and try again. May have curupt gapps.
emviveem said:
I did everything! I never got the option to format preload though. Everything else went smooth. Rebooted. Same problem persists.
Click to expand...
Click to collapse
And to top it all off, long pressing the home button refuses to bring up the recent apps/multitasking facility now. The notification bar doesn't work.
What nightly of carbon are you on?
Edit: also format pre load must be there? Mounts and storage. under format system I think.
andrewwright said:
What nightly of carbon are you on?
Edit: also format pre load must be there? Mounts and storage. under format system I think.
Click to expand...
Click to collapse
How do I check to tell which nightly I am on? And the first time I had done the full format, i had preload, and while i foramtted that, it gave me some error saying it couldnt do so. I completed the procedure anyways, availing no success. So, repeated it second time and found no preload option. The recovery menu seems to have changed. Is it a matter of concern? I am on a CWM recovery, apparently. and i found the preload option. tried. it says "Error foramtting /preload" how should i proceed?
Okay this is what I'm using "CARBON-JB-NIGHTLY-20131018-0102-i9100" Please help! I've run into more problems than I had anticipated! I am so worried. What should I do now?
emviveem said:
Okay this is what I'm using "CARBON-JB-NIGHTLY-20131018-0102-i9100" Please help! I've run into more problems than I had anticipated! I am so worried. What should I do now?
Click to expand...
Click to collapse
Sir, please reply. I'm sincerely apologize if I'm coming across as impatient but I'm **** scared. Please tell me how to proceed now..:crying:
Download 11/10 nightly and Dori 9.41.
Preload not formatting is worrying mate. Flash them and get bk to me
Try gapps for jb 4.3. It will surely work.
Sent from my GT-I9100 using xda app-developers app
20130810 is 4.3 isn't it? I'm sure it is.
andrewwright said:
Download 11/10 nightly and Dori 9.41.
Preload not formatting is worrying mate. Flash them and get bk to me
Click to expand...
Click to collapse
I am not able to locate the download links. Could you please do it for me?
I installed pacman rom yesterday and had no issues, today my screen wont turn off. It wont time out, and not even if i hit the power button. the only thing I am yet to try is a reflash.
Just wipe your caches and reflash the rom, should work.
The_Karwin said:
I installed pacman rom yesterday and had no issues, today my screen wont turn off. It wont time out, and not even if i hit the power button. the only thing I am yet to try is a reflash.
Click to expand...
Click to collapse
I agree with REALLY NOW, just a few more details from my habits.............
do your 3 wipes
flash rom alone (don't boot)
wipe Davlik & Cache
flash rom a 2nd time with Gapps this time
wipe D&C again
then boot
let it settle that 10 minutes.................
reboot again and set up
just my anal obsessive habits................
never fails me for a solid install
Really now said:
Just wipe your caches and reflash the rom, should work.
Click to expand...
Click to collapse
Trying this now. thanks in advance
captemo said:
I agree with REALLY NOW, just a few more details from my habits.............
do your 3 wipes
flash rom alone (don't boot)
wipe Davlik & Cache
flash rom a 2nd time with Gapps this time
wipe D&C again
then boot
let it settle that 10 minutes.................
reboot again and set up
just my anal obsessive habits................
never fails me for a solid install
Click to expand...
Click to collapse
thanks fixed it.
So i was kind of fiddling with my redmi note 3 in kernel auditor and had installed guyvers kernel. So what happended is that went to gpu settings and then selected the gpu governor as something like gpupow.... i dont remember and my phone just frose and rebooted and on reboot i selected the same option again and then my phone rebooted again and did not boot again and i am REALLY SCARED BECAUSE MY FATHER WILL SCOLD ME BEACAUSE OF THIS CLEARING DALVIK CACHE AND CACHE HELPED NOTHING RESTROING BOOT IMAGE FROM ZCX TWRP NO HELP !!!!!!!!!!!!!!!!!AND AT LAST FLASHED THE SAME KERNEL AGAIN AND STILL NOTHING!!!!!!!!!!!!!!!! I REALLY NEED SOPME HELP AS THIS PHONE IS MY DAILY DRIVER AND I MAKE SOME IMP CALLS WITH THIS AND PLAY A LOT OF GAMES I AM FRAKING OUT PLEASE HELP ME ANYBODY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
<Mod Edit> Thread closed.
How old are u? Have you tried flashing stock boot.img. in recovery? If nothing helps, wipe and then start all over again. Next time do a backup
Hi there
I'm totally happy with this device but had an issue today for no apparent reason.
I was using it normally, I put it in my pocket (80% battery) and when I took it out, it was stuck on MI logo screen. Maybe screen wasn't properly blocked or something. But I find all the situation quite shocking since I normally set manual updates for system, and apps, playstore, etc.
I haven't done any flashing opperation recently since I'm not much into this kind of things nor installed any new app recenlty. However the phone was rooted (previos bootloader unlocking) quite a while ago by using "magisk method keeping stock recovery for OTA".
The phone is permanently on with MI logo on screen. I tried using power off button for a long time to see if I could turn it off but it didn't work.
I have access to Fast Boot and to Stock Recovery (3.0).
Is there any way to enter the system again without losing all data? If not, can I recover data before "flashing" anything or before using "wipe all data" option in recovery mode?
Thank you for any possible answer.
Reinstall twrp and boot into twrp from Command Window and Flash Lazy flasher you'll be booted into Your phone
notoriouslion said:
Reinstall twrp and boot into twrp from Command Window and Flash Lazy flasher you'll be booted into Your phone
Click to expand...
Click to collapse
Thanks a lot mate, with this small guidance and not much idea about this things I flashed lazyflasher, wiped cache and dalvik (couldn't with stock recovery) and reboot into system.
Just out of curiosity, by flashing this lazyflasher have I done permanent changes on the system, or just through the first immediate boot they disappear?
What do you think could cause a bootlop if not an update? May an app installed a while ago causing something like this?
xdaforo said:
Thanks a lot mate, with this small guidance and not much idea about this things I flashed lazyflasher, wiped cache and dalvik (couldn't with stock recovery) and reboot into system.
Just out of curiosity, by flashing this lazyflasher have I done permanent changes on the system, or just through the first immediate boot they disappear?
What do you think could cause a bootlop if not an update? May an app installed a while ago causing something like this?
Click to expand...
Click to collapse
It happens sometimes for Unknown reasons and Lazyflasher will not harm your device and I would suggest you to flash Another Rom
xdaforo said:
Thanks a lot mate, with this small guidance and not much idea about this things I flashed lazyflasher, wiped cache and dalvik (couldn't with stock recovery) and reboot into system.
Just out of curiosity, by flashing this lazyflasher have I done permanent changes on the system, or just through the first immediate boot they disappear?
What do you think could cause a bootlop if not an update? May an app installed a while ago causing something like this?
Click to expand...
Click to collapse
Did you run any root apps ? If /system changes you need Lazyflasher I think. You could alternatively reflash the ROM (without wiping data)